Fix panic from Intel CPU vulnerability mitigation.

[FreeBSD/FreeBSD.git] / sys / i386 / i386 / machdep.c

/*-
 * Copyright (c) 1992 Terrence R. Lambert.
 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * William Jolitz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by the University of
 *      California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      from: @(#)machdep.c     7.4 (Berkeley) 6/3/91
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include "opt_apic.h"
#include "opt_atpic.h"
#include "opt_compat.h"
#include "opt_cpu.h"
#include "opt_ddb.h"
#include "opt_inet.h"
#include "opt_isa.h"
#include "opt_kstack_pages.h"
#include "opt_maxmem.h"
#include "opt_mp_watchdog.h"
#include "opt_perfmon.h"
#include "opt_platform.h"
#include "opt_xbox.h"

#include <sys/param.h>
#include <sys/proc.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/callout.h>
#include <sys/cons.h>
#include <sys/cpu.h>
#include <sys/eventhandler.h>
#include <sys/exec.h>
#include <sys/imgact.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/linker.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/memrange.h>
#include <sys/msgbuf.h>
#include <sys/mutex.h>
#include <sys/pcpu.h>
#include <sys/ptrace.h>
#include <sys/reboot.h>
#include <sys/rwlock.h>
#include <sys/sched.h>
#include <sys/signalvar.h>
#ifdef SMP
#include <sys/smp.h>
#endif
#include <sys/syscallsubr.h>
#include <sys/sysctl.h>
#include <sys/sysent.h>
#include <sys/sysproto.h>
#include <sys/ucontext.h>
#include <sys/vmmeter.h>

#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/vm_kern.h>
#include <vm/vm_page.h>
#include <vm/vm_map.h>
#include <vm/vm_object.h>
#include <vm/vm_pager.h>
#include <vm/vm_param.h>
#include <vm/vm_phys.h>

#ifdef DDB
#ifndef KDB
#error KDB must be enabled in order for DDB to work!
#endif
#include <ddb/ddb.h>
#include <ddb/db_sym.h>
#endif

#ifdef PC98
#include <pc98/pc98/pc98_machdep.h>
#else
#include <isa/rtc.h>
#endif

#include <net/netisr.h>

#include <machine/bootinfo.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cputypes.h>
#include <machine/intr_machdep.h>
#include <x86/mca.h>
#include <machine/md_var.h>
#include <machine/metadata.h>
#include <machine/mp_watchdog.h>
#include <machine/pc/bios.h>
#include <machine/pcb.h>
#include <machine/pcb_ext.h>
#include <machine/proc.h>
#include <machine/reg.h>
#include <machine/sigframe.h>
#include <machine/specialreg.h>
#include <x86/ucode.h>
#include <machine/vm86.h>
#include <x86/init.h>
#ifdef PERFMON
#include <machine/perfmon.h>
#endif
#ifdef SMP
#include <machine/smp.h>
#endif
#ifdef FDT
#include <x86/fdt.h>
#endif

#ifdef DEV_APIC
#include <x86/apicvar.h>
#endif

#ifdef DEV_ISA
#include <x86/isa/icu.h>
#endif

#ifdef XBOX
#include <machine/xbox.h>

int arch_i386_is_xbox = 0;
uint32_t arch_i386_xbox_memsize = 0;
#endif

/* Sanity check for __curthread() */
CTASSERT(offsetof(struct pcpu, pc_curthread) == 0);

extern register_t init386(int first);
extern void dblfault_handler(void);
void identify_cpu(void);

static void cpu_startup(void *);
static void fpstate_drop(struct thread *td);
static void get_fpcontext(struct thread *td, mcontext_t *mcp,
    char *xfpusave, size_t xfpusave_len);
static int  set_fpcontext(struct thread *td, mcontext_t *mcp,
    char *xfpustate, size_t xfpustate_len);
SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL);

/* Intel ICH registers */
#define ICH_PMBASE      0x400
#define ICH_SMI_EN      ICH_PMBASE + 0x30

int     _udatasel, _ucodesel;
u_int   basemem;

#ifdef PC98
int     need_pre_dma_flush;     /* If 1, use wbinvd befor DMA transfer. */
int     need_post_dma_flush;    /* If 1, use invd after DMA transfer. */

static int      ispc98 = 1;
SYSCTL_INT(_machdep, OID_AUTO, ispc98, CTLFLAG_RD, &ispc98, 0, "");
#endif

int cold = 1;

#ifdef COMPAT_43
static void osendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask);
#endif
#ifdef COMPAT_FREEBSD4
static void freebsd4_sendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask);
#endif

long Maxmem = 0;
long realmem = 0;

#ifdef PAE
FEATURE(pae, "Physical Address Extensions");
#endif

/*
 * The number of PHYSMAP entries must be one less than the number of
 * PHYSSEG entries because the PHYSMAP entry that spans the largest
 * physical address that is accessible by ISA DMA is split into two
 * PHYSSEG entries.
 */
#define PHYSMAP_SIZE    (2 * (VM_PHYSSEG_MAX - 1))

vm_paddr_t phys_avail[PHYSMAP_SIZE + 2];
vm_paddr_t dump_avail[PHYSMAP_SIZE + 2];

/* must be 2 less so 0 0 can signal end of chunks */
#define PHYS_AVAIL_ARRAY_END (nitems(phys_avail) - 2)
#define DUMP_AVAIL_ARRAY_END (nitems(dump_avail) - 2)

struct kva_md_info kmi;

static struct trapframe proc0_tf;
struct pcpu __pcpu[MAXCPU];

struct mtx icu_lock;

struct mem_range_softc mem_range_softc;

 /* Default init_ops implementation. */
 struct init_ops init_ops = {
        .early_clock_source_init =      i8254_init,
        .early_delay =                  i8254_delay,
#ifdef DEV_APIC
        .msi_init =                     msi_init,
#endif
 };

static void
cpu_startup(dummy)
        void *dummy;
{
        uintmax_t memsize;
        char *sysenv;

#ifndef PC98
        /*
         * On MacBooks, we need to disallow the legacy USB circuit to
         * generate an SMI# because this can cause several problems,
         * namely: incorrect CPU frequency detection and failure to
         * start the APs.
         * We do this by disabling a bit in the SMI_EN (SMI Control and
         * Enable register) of the Intel ICH LPC Interface Bridge.
         */
        sysenv = kern_getenv("smbios.system.product");
        if (sysenv != NULL) {
                if (strncmp(sysenv, "MacBook1,1", 10) == 0 ||
                    strncmp(sysenv, "MacBook3,1", 10) == 0 ||
                    strncmp(sysenv, "MacBook4,1", 10) == 0 ||
                    strncmp(sysenv, "MacBookPro1,1", 13) == 0 ||
                    strncmp(sysenv, "MacBookPro1,2", 13) == 0 ||
                    strncmp(sysenv, "MacBookPro3,1", 13) == 0 ||
                    strncmp(sysenv, "MacBookPro4,1", 13) == 0 ||
                    strncmp(sysenv, "Macmini1,1", 10) == 0) {
                        if (bootverbose)
                                printf("Disabling LEGACY_USB_EN bit on "
                                    "Intel ICH.\n");
                        outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8);
                }
                freeenv(sysenv);
        }
#endif /* !PC98 */

        /*
         * Good {morning,afternoon,evening,night}.
         */
        startrtclock();
        printcpuinfo();
        panicifcpuunsupported();
#ifdef PERFMON
        perfmon_init();
#endif

        /*
         * Display physical memory if SMBIOS reports reasonable amount.
         */
        memsize = 0;
        sysenv = kern_getenv("smbios.memory.enabled");
        if (sysenv != NULL) {
                memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10;
                freeenv(sysenv);
        }
        if (memsize < ptoa((uintmax_t)vm_cnt.v_free_count))
                memsize = ptoa((uintmax_t)Maxmem);
        printf("real memory  = %ju (%ju MB)\n", memsize, memsize >> 20);
        realmem = atop(memsize);

        /*
         * Display any holes after the first chunk of extended memory.
         */
        if (bootverbose) {
                int indx;

                printf("Physical memory chunk(s):\n");
                for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) {
                        vm_paddr_t size;

                        size = phys_avail[indx + 1] - phys_avail[indx];
                        printf(
                            "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n",
                            (uintmax_t)phys_avail[indx],
                            (uintmax_t)phys_avail[indx + 1] - 1,
                            (uintmax_t)size, (uintmax_t)size / PAGE_SIZE);
                }
        }

        vm_ksubmap_init(&kmi);

        printf("avail memory = %ju (%ju MB)\n",
            ptoa((uintmax_t)vm_cnt.v_free_count),
            ptoa((uintmax_t)vm_cnt.v_free_count) / 1048576);

        /*
         * Set up buffers, so they can be used to read disk labels.
         */
        bufinit();
        vm_pager_bufferinit();
        cpu_setregs();
}

/*
 * Send an interrupt to process.
 *
 * Stack is set up to allow sigcode stored
 * at top to call routine, followed by call
 * to sigreturn routine below.  After sigreturn
 * resets the signal mask, the stack, and the
 * frame pointer, it returns to the user
 * specified pc, psl.
 */
#ifdef COMPAT_43
static void
osendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask)
{
        struct osigframe sf, *fp;
        struct proc *p;
        struct thread *td;
        struct sigacts *psp;
        struct trapframe *regs;
        int sig;
        int oonstack;

        td = curthread;
        p = td->td_proc;
        PROC_LOCK_ASSERT(p, MA_OWNED);
        sig = ksi->ksi_signo;
        psp = p->p_sigacts;
        mtx_assert(&psp->ps_mtx, MA_OWNED);
        regs = td->td_frame;
        oonstack = sigonstack(regs->tf_esp);

        /* Allocate space for the signal handler context. */
        if ((td->td_pflags & TDP_ALTSTACK) && !oonstack &&
            SIGISMEMBER(psp->ps_sigonstack, sig)) {
                fp = (struct osigframe *)((uintptr_t)td->td_sigstk.ss_sp +
                    td->td_sigstk.ss_size - sizeof(struct osigframe));
#if defined(COMPAT_43)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
#endif
        } else
                fp = (struct osigframe *)regs->tf_esp - 1;

        /* Build the argument list for the signal handler. */
        sf.sf_signum = sig;
        sf.sf_scp = (register_t)&fp->sf_siginfo.si_sc;
        bzero(&sf.sf_siginfo, sizeof(sf.sf_siginfo));
        if (SIGISMEMBER(psp->ps_siginfo, sig)) {
                /* Signal handler installed with SA_SIGINFO. */
                sf.sf_arg2 = (register_t)&fp->sf_siginfo;
                sf.sf_siginfo.si_signo = sig;
                sf.sf_siginfo.si_code = ksi->ksi_code;
                sf.sf_ahu.sf_action = (__osiginfohandler_t *)catcher;
                sf.sf_addr = 0;
        } else {
                /* Old FreeBSD-style arguments. */
                sf.sf_arg2 = ksi->ksi_code;
                sf.sf_addr = (register_t)ksi->ksi_addr;
                sf.sf_ahu.sf_handler = catcher;
        }
        mtx_unlock(&psp->ps_mtx);
        PROC_UNLOCK(p);

        /* Save most if not all of trap frame. */
        sf.sf_siginfo.si_sc.sc_eax = regs->tf_eax;
        sf.sf_siginfo.si_sc.sc_ebx = regs->tf_ebx;
        sf.sf_siginfo.si_sc.sc_ecx = regs->tf_ecx;
        sf.sf_siginfo.si_sc.sc_edx = regs->tf_edx;
        sf.sf_siginfo.si_sc.sc_esi = regs->tf_esi;
        sf.sf_siginfo.si_sc.sc_edi = regs->tf_edi;
        sf.sf_siginfo.si_sc.sc_cs = regs->tf_cs;
        sf.sf_siginfo.si_sc.sc_ds = regs->tf_ds;
        sf.sf_siginfo.si_sc.sc_ss = regs->tf_ss;
        sf.sf_siginfo.si_sc.sc_es = regs->tf_es;
        sf.sf_siginfo.si_sc.sc_fs = regs->tf_fs;
        sf.sf_siginfo.si_sc.sc_gs = rgs();
        sf.sf_siginfo.si_sc.sc_isp = regs->tf_isp;

        /* Build the signal context to be used by osigreturn(). */
        sf.sf_siginfo.si_sc.sc_onstack = (oonstack) ? 1 : 0;
        SIG2OSIG(*mask, sf.sf_siginfo.si_sc.sc_mask);
        sf.sf_siginfo.si_sc.sc_sp = regs->tf_esp;
        sf.sf_siginfo.si_sc.sc_fp = regs->tf_ebp;
        sf.sf_siginfo.si_sc.sc_pc = regs->tf_eip;
        sf.sf_siginfo.si_sc.sc_ps = regs->tf_eflags;
        sf.sf_siginfo.si_sc.sc_trapno = regs->tf_trapno;
        sf.sf_siginfo.si_sc.sc_err = regs->tf_err;

        /*
         * If we're a vm86 process, we want to save the segment registers.
         * We also change eflags to be our emulated eflags, not the actual
         * eflags.
         */
        if (regs->tf_eflags & PSL_VM) {
                /* XXX confusing names: `tf' isn't a trapframe; `regs' is. */
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86;

                sf.sf_siginfo.si_sc.sc_gs = tf->tf_vm86_gs;
                sf.sf_siginfo.si_sc.sc_fs = tf->tf_vm86_fs;
                sf.sf_siginfo.si_sc.sc_es = tf->tf_vm86_es;
                sf.sf_siginfo.si_sc.sc_ds = tf->tf_vm86_ds;

                if (vm86->vm86_has_vme == 0)
                        sf.sf_siginfo.si_sc.sc_ps =
                            (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
                            (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));

                /* See sendsig() for comments. */
                tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
        }

        /*
         * Copy the sigframe out to the user's stack.
         */
        if (copyout(&sf, fp, sizeof(*fp)) != 0) {
                PROC_LOCK(p);
                sigexit(td, SIGILL);
        }

        regs->tf_esp = (int)fp;
        if (p->p_sysent->sv_sigcode_base != 0) {
                regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode -
                    szosigcode;
        } else {
                /* a.out sysentvec does not use shared page */
                regs->tf_eip = p->p_sysent->sv_psstrings - szosigcode;
        }
        regs->tf_eflags &= ~(PSL_T | PSL_D);
        regs->tf_cs = _ucodesel;
        regs->tf_ds = _udatasel;
        regs->tf_es = _udatasel;
        regs->tf_fs = _udatasel;
        load_gs(_udatasel);
        regs->tf_ss = _udatasel;
        PROC_LOCK(p);
        mtx_lock(&psp->ps_mtx);
}
#endif /* COMPAT_43 */

#ifdef COMPAT_FREEBSD4
static void
freebsd4_sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask)
{
        struct sigframe4 sf, *sfp;
        struct proc *p;
        struct thread *td;
        struct sigacts *psp;
        struct trapframe *regs;
        int sig;
        int oonstack;

        td = curthread;
        p = td->td_proc;
        PROC_LOCK_ASSERT(p, MA_OWNED);
        sig = ksi->ksi_signo;
        psp = p->p_sigacts;
        mtx_assert(&psp->ps_mtx, MA_OWNED);
        regs = td->td_frame;
        oonstack = sigonstack(regs->tf_esp);

        /* Save user context. */
        bzero(&sf, sizeof(sf));
        sf.sf_uc.uc_sigmask = *mask;
        sf.sf_uc.uc_stack = td->td_sigstk;
        sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK)
            ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE;
        sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0;
        sf.sf_uc.uc_mcontext.mc_gs = rgs();
        bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs));
        bzero(sf.sf_uc.uc_mcontext.mc_fpregs,
            sizeof(sf.sf_uc.uc_mcontext.mc_fpregs));
        bzero(sf.sf_uc.uc_mcontext.__spare__,
            sizeof(sf.sf_uc.uc_mcontext.__spare__));
        bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__));

        /* Allocate space for the signal handler context. */
        if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack &&
            SIGISMEMBER(psp->ps_sigonstack, sig)) {
                sfp = (struct sigframe4 *)((uintptr_t)td->td_sigstk.ss_sp +
                    td->td_sigstk.ss_size - sizeof(struct sigframe4));
#if defined(COMPAT_43)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
#endif
        } else
                sfp = (struct sigframe4 *)regs->tf_esp - 1;

        /* Build the argument list for the signal handler. */
        sf.sf_signum = sig;
        sf.sf_ucontext = (register_t)&sfp->sf_uc;
        bzero(&sf.sf_si, sizeof(sf.sf_si));
        if (SIGISMEMBER(psp->ps_siginfo, sig)) {
                /* Signal handler installed with SA_SIGINFO. */
                sf.sf_siginfo = (register_t)&sfp->sf_si;
                sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;

                /* Fill in POSIX parts */
                sf.sf_si.si_signo = sig;
                sf.sf_si.si_code = ksi->ksi_code;
                sf.sf_si.si_addr = ksi->ksi_addr;
        } else {
                /* Old FreeBSD-style arguments. */
                sf.sf_siginfo = ksi->ksi_code;
                sf.sf_addr = (register_t)ksi->ksi_addr;
                sf.sf_ahu.sf_handler = catcher;
        }
        mtx_unlock(&psp->ps_mtx);
        PROC_UNLOCK(p);

        /*
         * If we're a vm86 process, we want to save the segment registers.
         * We also change eflags to be our emulated eflags, not the actual
         * eflags.
         */
        if (regs->tf_eflags & PSL_VM) {
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86;

                sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs;
                sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs;
                sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es;
                sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds;

                if (vm86->vm86_has_vme == 0)
                        sf.sf_uc.uc_mcontext.mc_eflags =
                            (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
                            (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));

                /*
                 * Clear PSL_NT to inhibit T_TSSFLT faults on return from
                 * syscalls made by the signal handler.  This just avoids
                 * wasting time for our lazy fixup of such faults.  PSL_NT
                 * does nothing in vm86 mode, but vm86 programs can set it
                 * almost legitimately in probes for old cpu types.
                 */
                tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
        }

        /*
         * Copy the sigframe out to the user's stack.
         */
        if (copyout(&sf, sfp, sizeof(*sfp)) != 0) {
                PROC_LOCK(p);
                sigexit(td, SIGILL);
        }

        regs->tf_esp = (int)sfp;
        regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode -
            szfreebsd4_sigcode;
        regs->tf_eflags &= ~(PSL_T | PSL_D);
        regs->tf_cs = _ucodesel;
        regs->tf_ds = _udatasel;
        regs->tf_es = _udatasel;
        regs->tf_fs = _udatasel;
        regs->tf_ss = _udatasel;
        PROC_LOCK(p);
        mtx_lock(&psp->ps_mtx);
}
#endif  /* COMPAT_FREEBSD4 */

void
sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask)
{
        struct sigframe sf, *sfp;
        struct proc *p;
        struct thread *td;
        struct sigacts *psp;
        char *sp;
        struct trapframe *regs;
        struct segment_descriptor *sdp;
        char *xfpusave;
        size_t xfpusave_len;
        int sig;
        int oonstack;

        td = curthread;
        p = td->td_proc;
        PROC_LOCK_ASSERT(p, MA_OWNED);
        sig = ksi->ksi_signo;
        psp = p->p_sigacts;
        mtx_assert(&psp->ps_mtx, MA_OWNED);
#ifdef COMPAT_FREEBSD4
        if (SIGISMEMBER(psp->ps_freebsd4, sig)) {
                freebsd4_sendsig(catcher, ksi, mask);
                return;
        }
#endif
#ifdef COMPAT_43
        if (SIGISMEMBER(psp->ps_osigset, sig)) {
                osendsig(catcher, ksi, mask);
                return;
        }
#endif
        regs = td->td_frame;
        oonstack = sigonstack(regs->tf_esp);

        if (cpu_max_ext_state_size > sizeof(union savefpu) && use_xsave) {
                xfpusave_len = cpu_max_ext_state_size - sizeof(union savefpu);
                xfpusave = __builtin_alloca(xfpusave_len);
        } else {
                xfpusave_len = 0;
                xfpusave = NULL;
        }

        /* Save user context. */
        bzero(&sf, sizeof(sf));
        sf.sf_uc.uc_sigmask = *mask;
        sf.sf_uc.uc_stack = td->td_sigstk;
        sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK)
            ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE;
        sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0;
        sf.sf_uc.uc_mcontext.mc_gs = rgs();
        bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs));
        sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */
        get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len);
        fpstate_drop(td);
        /*
         * Unconditionally fill the fsbase and gsbase into the mcontext.
         */
        sdp = &td->td_pcb->pcb_fsd;
        sf.sf_uc.uc_mcontext.mc_fsbase = sdp->sd_hibase << 24 |
            sdp->sd_lobase;
        sdp = &td->td_pcb->pcb_gsd;
        sf.sf_uc.uc_mcontext.mc_gsbase = sdp->sd_hibase << 24 |
            sdp->sd_lobase;
        bzero(sf.sf_uc.uc_mcontext.mc_spare2,
            sizeof(sf.sf_uc.uc_mcontext.mc_spare2));
        bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__));

        /* Allocate space for the signal handler context. */
        if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack &&
            SIGISMEMBER(psp->ps_sigonstack, sig)) {
                sp = (char *)td->td_sigstk.ss_sp + td->td_sigstk.ss_size;
#if defined(COMPAT_43)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
#endif
        } else
                sp = (char *)regs->tf_esp - 128;
        if (xfpusave != NULL) {
                sp -= xfpusave_len;
                sp = (char *)((unsigned int)sp & ~0x3F);
                sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp;
        }
        sp -= sizeof(struct sigframe);

        /* Align to 16 bytes. */
        sfp = (struct sigframe *)((unsigned int)sp & ~0xF);

        /* Build the argument list for the signal handler. */
        sf.sf_signum = sig;
        sf.sf_ucontext = (register_t)&sfp->sf_uc;
        bzero(&sf.sf_si, sizeof(sf.sf_si));
        if (SIGISMEMBER(psp->ps_siginfo, sig)) {
                /* Signal handler installed with SA_SIGINFO. */
                sf.sf_siginfo = (register_t)&sfp->sf_si;
                sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;

                /* Fill in POSIX parts */
                sf.sf_si = ksi->ksi_info;
                sf.sf_si.si_signo = sig; /* maybe a translated signal */
        } else {
                /* Old FreeBSD-style arguments. */
                sf.sf_siginfo = ksi->ksi_code;
                sf.sf_addr = (register_t)ksi->ksi_addr;
                sf.sf_ahu.sf_handler = catcher;
        }
        mtx_unlock(&psp->ps_mtx);
        PROC_UNLOCK(p);

        /*
         * If we're a vm86 process, we want to save the segment registers.
         * We also change eflags to be our emulated eflags, not the actual
         * eflags.
         */
        if (regs->tf_eflags & PSL_VM) {
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86;

                sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs;
                sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs;
                sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es;
                sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds;

                if (vm86->vm86_has_vme == 0)
                        sf.sf_uc.uc_mcontext.mc_eflags =
                            (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
                            (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));

                /*
                 * Clear PSL_NT to inhibit T_TSSFLT faults on return from
                 * syscalls made by the signal handler.  This just avoids
                 * wasting time for our lazy fixup of such faults.  PSL_NT
                 * does nothing in vm86 mode, but vm86 programs can set it
                 * almost legitimately in probes for old cpu types.
                 */
                tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
        }

        /*
         * Copy the sigframe out to the user's stack.
         */
        if (copyout(&sf, sfp, sizeof(*sfp)) != 0 ||
            (xfpusave != NULL && copyout(xfpusave,
            (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len)
            != 0)) {
                PROC_LOCK(p);
                sigexit(td, SIGILL);
        }

        regs->tf_esp = (int)sfp;
        regs->tf_eip = p->p_sysent->sv_sigcode_base;
        if (regs->tf_eip == 0)
                regs->tf_eip = p->p_sysent->sv_psstrings - szsigcode;
        regs->tf_eflags &= ~(PSL_T | PSL_D);
        regs->tf_cs = _ucodesel;
        regs->tf_ds = _udatasel;
        regs->tf_es = _udatasel;
        regs->tf_fs = _udatasel;
        regs->tf_ss = _udatasel;
        PROC_LOCK(p);
        mtx_lock(&psp->ps_mtx);
}

/*
 * System call to cleanup state after a signal
 * has been taken.  Reset signal mask and
 * stack state from context left by sendsig (above).
 * Return to previous pc and psl as specified by
 * context left by sendsig. Check carefully to
 * make sure that the user has not modified the
 * state to gain improper privileges.
 *
 * MPSAFE
 */
#ifdef COMPAT_43
int
osigreturn(td, uap)
        struct thread *td;
        struct osigreturn_args /* {
                struct osigcontext *sigcntxp;
        } */ *uap;
{
        struct osigcontext sc;
        struct trapframe *regs;
        struct osigcontext *scp;
        int eflags, error;
        ksiginfo_t ksi;

        regs = td->td_frame;
        error = copyin(uap->sigcntxp, &sc, sizeof(sc));
        if (error != 0)
                return (error);
        scp = &sc;
        eflags = scp->sc_ps;
        if (eflags & PSL_VM) {
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86;

                /*
                 * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
                 * set up the vm86 area, and we can't enter vm86 mode.
                 */
                if (td->td_pcb->pcb_ext == 0)
                        return (EINVAL);
                vm86 = &td->td_pcb->pcb_ext->ext_vm86;
                if (vm86->vm86_inited == 0)
                        return (EINVAL);

                /* Go back to user mode if both flags are set. */
                if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) {
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                }

                if (vm86->vm86_has_vme) {
                        eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
                            (eflags & VME_USERCHANGE) | PSL_VM;
                } else {
                        vm86->vm86_eflags = eflags;     /* save VIF, VIP */
                        eflags = (tf->tf_eflags & ~VM_USERCHANGE) |
                            (eflags & VM_USERCHANGE) | PSL_VM;
                }
                tf->tf_vm86_ds = scp->sc_ds;
                tf->tf_vm86_es = scp->sc_es;
                tf->tf_vm86_fs = scp->sc_fs;
                tf->tf_vm86_gs = scp->sc_gs;
                tf->tf_ds = _udatasel;
                tf->tf_es = _udatasel;
                tf->tf_fs = _udatasel;
        } else {
                /*
                 * Don't allow users to change privileged or reserved flags.
                 */
                if (!EFL_SECURE(eflags, regs->tf_eflags)) {
                        return (EINVAL);
                }

                /*
                 * Don't allow users to load a valid privileged %cs.  Let the
                 * hardware check for invalid selectors, excess privilege in
                 * other selectors, invalid %eip's and invalid %esp's.
                 */
                if (!CS_SECURE(scp->sc_cs)) {
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_trapno = T_PROTFLT;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                        return (EINVAL);
                }
                regs->tf_ds = scp->sc_ds;
                regs->tf_es = scp->sc_es;
                regs->tf_fs = scp->sc_fs;
        }

        /* Restore remaining registers. */
        regs->tf_eax = scp->sc_eax;
        regs->tf_ebx = scp->sc_ebx;
        regs->tf_ecx = scp->sc_ecx;
        regs->tf_edx = scp->sc_edx;
        regs->tf_esi = scp->sc_esi;
        regs->tf_edi = scp->sc_edi;
        regs->tf_cs = scp->sc_cs;
        regs->tf_ss = scp->sc_ss;
        regs->tf_isp = scp->sc_isp;
        regs->tf_ebp = scp->sc_fp;
        regs->tf_esp = scp->sc_sp;
        regs->tf_eip = scp->sc_pc;
        regs->tf_eflags = eflags;

#if defined(COMPAT_43)
        if (scp->sc_onstack & 1)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
        else
                td->td_sigstk.ss_flags &= ~SS_ONSTACK;
#endif
        kern_sigprocmask(td, SIG_SETMASK, (sigset_t *)&scp->sc_mask, NULL,
            SIGPROCMASK_OLD);
        return (EJUSTRETURN);
}
#endif /* COMPAT_43 */

#ifdef COMPAT_FREEBSD4
/*
 * MPSAFE
 */
int
freebsd4_sigreturn(td, uap)
        struct thread *td;
        struct freebsd4_sigreturn_args /* {
                const ucontext4 *sigcntxp;
        } */ *uap;
{
        struct ucontext4 uc;
        struct trapframe *regs;
        struct ucontext4 *ucp;
        int cs, eflags, error;
        ksiginfo_t ksi;

        error = copyin(uap->sigcntxp, &uc, sizeof(uc));
        if (error != 0)
                return (error);
        ucp = &uc;
        regs = td->td_frame;
        eflags = ucp->uc_mcontext.mc_eflags;
        if (eflags & PSL_VM) {
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86;

                /*
                 * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
                 * set up the vm86 area, and we can't enter vm86 mode.
                 */
                if (td->td_pcb->pcb_ext == 0)
                        return (EINVAL);
                vm86 = &td->td_pcb->pcb_ext->ext_vm86;
                if (vm86->vm86_inited == 0)
                        return (EINVAL);

                /* Go back to user mode if both flags are set. */
                if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) {
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                }
                if (vm86->vm86_has_vme) {
                        eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
                            (eflags & VME_USERCHANGE) | PSL_VM;
                } else {
                        vm86->vm86_eflags = eflags;     /* save VIF, VIP */
                        eflags = (tf->tf_eflags & ~VM_USERCHANGE) |
                            (eflags & VM_USERCHANGE) | PSL_VM;
                }
                bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe));
                tf->tf_eflags = eflags;
                tf->tf_vm86_ds = tf->tf_ds;
                tf->tf_vm86_es = tf->tf_es;
                tf->tf_vm86_fs = tf->tf_fs;
                tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs;
                tf->tf_ds = _udatasel;
                tf->tf_es = _udatasel;
                tf->tf_fs = _udatasel;
        } else {
                /*
                 * Don't allow users to change privileged or reserved flags.
                 */
                if (!EFL_SECURE(eflags, regs->tf_eflags)) {
                        uprintf("pid %d (%s): freebsd4_sigreturn eflags = 0x%x\n",
                            td->td_proc->p_pid, td->td_name, eflags);
                        return (EINVAL);
                }

                /*
                 * Don't allow users to load a valid privileged %cs.  Let the
                 * hardware check for invalid selectors, excess privilege in
                 * other selectors, invalid %eip's and invalid %esp's.
                 */
                cs = ucp->uc_mcontext.mc_cs;
                if (!CS_SECURE(cs)) {
                        uprintf("pid %d (%s): freebsd4_sigreturn cs = 0x%x\n",
                            td->td_proc->p_pid, td->td_name, cs);
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_trapno = T_PROTFLT;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                        return (EINVAL);
                }

                bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs));
        }

#if defined(COMPAT_43)
        if (ucp->uc_mcontext.mc_onstack & 1)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
        else
                td->td_sigstk.ss_flags &= ~SS_ONSTACK;
#endif
        kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0);
        return (EJUSTRETURN);
}
#endif  /* COMPAT_FREEBSD4 */

/*
 * MPSAFE
 */
int
sys_sigreturn(td, uap)
        struct thread *td;
        struct sigreturn_args /* {
                const struct __ucontext *sigcntxp;
        } */ *uap;
{
        ucontext_t uc;
        struct proc *p;
        struct trapframe *regs;
        ucontext_t *ucp;
        char *xfpustate;
        size_t xfpustate_len;
        int cs, eflags, error, ret;
        ksiginfo_t ksi;

        p = td->td_proc;

        error = copyin(uap->sigcntxp, &uc, sizeof(uc));
        if (error != 0)
                return (error);
        ucp = &uc;
        if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) {
                uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid,
                    td->td_name, ucp->uc_mcontext.mc_flags);
                return (EINVAL);
        }
        regs = td->td_frame;
        eflags = ucp->uc_mcontext.mc_eflags;
        if (eflags & PSL_VM) {
                struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
                struct vm86_kernel *vm86;

                /*
                 * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
                 * set up the vm86 area, and we can't enter vm86 mode.
                 */
                if (td->td_pcb->pcb_ext == 0)
                        return (EINVAL);
                vm86 = &td->td_pcb->pcb_ext->ext_vm86;
                if (vm86->vm86_inited == 0)
                        return (EINVAL);

                /* Go back to user mode if both flags are set. */
                if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) {
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                }

                if (vm86->vm86_has_vme) {
                        eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
                            (eflags & VME_USERCHANGE) | PSL_VM;
                } else {
                        vm86->vm86_eflags = eflags;     /* save VIF, VIP */
                        eflags = (tf->tf_eflags & ~VM_USERCHANGE) |
                            (eflags & VM_USERCHANGE) | PSL_VM;
                }
                bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe));
                tf->tf_eflags = eflags;
                tf->tf_vm86_ds = tf->tf_ds;
                tf->tf_vm86_es = tf->tf_es;
                tf->tf_vm86_fs = tf->tf_fs;
                tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs;
                tf->tf_ds = _udatasel;
                tf->tf_es = _udatasel;
                tf->tf_fs = _udatasel;
        } else {
                /*
                 * Don't allow users to change privileged or reserved flags.
                 */
                if (!EFL_SECURE(eflags, regs->tf_eflags)) {
                        uprintf("pid %d (%s): sigreturn eflags = 0x%x\n",
                            td->td_proc->p_pid, td->td_name, eflags);
                        return (EINVAL);
                }

                /*
                 * Don't allow users to load a valid privileged %cs.  Let the
                 * hardware check for invalid selectors, excess privilege in
                 * other selectors, invalid %eip's and invalid %esp's.
                 */
                cs = ucp->uc_mcontext.mc_cs;
                if (!CS_SECURE(cs)) {
                        uprintf("pid %d (%s): sigreturn cs = 0x%x\n",
                            td->td_proc->p_pid, td->td_name, cs);
                        ksiginfo_init_trap(&ksi);
                        ksi.ksi_signo = SIGBUS;
                        ksi.ksi_code = BUS_OBJERR;
                        ksi.ksi_trapno = T_PROTFLT;
                        ksi.ksi_addr = (void *)regs->tf_eip;
                        trapsignal(td, &ksi);
                        return (EINVAL);
                }

                if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) {
                        xfpustate_len = uc.uc_mcontext.mc_xfpustate_len;
                        if (xfpustate_len > cpu_max_ext_state_size -
                            sizeof(union savefpu)) {
                                uprintf(
                            "pid %d (%s): sigreturn xfpusave_len = 0x%zx\n",
                                    p->p_pid, td->td_name, xfpustate_len);
                                return (EINVAL);
                        }
                        xfpustate = __builtin_alloca(xfpustate_len);
                        error = copyin((const void *)uc.uc_mcontext.mc_xfpustate,
                            xfpustate, xfpustate_len);
                        if (error != 0) {
                                uprintf(
        "pid %d (%s): sigreturn copying xfpustate failed\n",
                                    p->p_pid, td->td_name);
                                return (error);
                        }
                } else {
                        xfpustate = NULL;
                        xfpustate_len = 0;
                }
                ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate,
                    xfpustate_len);
                if (ret != 0)
                        return (ret);
                bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs));
        }

#if defined(COMPAT_43)
        if (ucp->uc_mcontext.mc_onstack & 1)
                td->td_sigstk.ss_flags |= SS_ONSTACK;
        else
                td->td_sigstk.ss_flags &= ~SS_ONSTACK;
#endif

        kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0);
        return (EJUSTRETURN);
}

/*
 * Reset registers to default values on exec.
 */
void
exec_setregs(struct thread *td, struct image_params *imgp, u_long stack)
{
        struct trapframe *regs;
        struct pcb *pcb;
        register_t saved_eflags;

        regs = td->td_frame;
        pcb = td->td_pcb;

        /* Reset pc->pcb_gs and %gs before possibly invalidating it. */
        pcb->pcb_gs = _udatasel;
        load_gs(_udatasel);

        mtx_lock_spin(&dt_lock);
        if (td->td_proc->p_md.md_ldt)
                user_ldt_free(td);
        else
                mtx_unlock_spin(&dt_lock);
  
        /*
         * Reset the fs and gs bases.  The values from the old address
         * space do not make sense for the new program.  In particular,
         * gsbase might be the TLS base for the old program but the new
         * program has no TLS now.
         */
        set_fsbase(td, 0);
        set_gsbase(td, 0);

        saved_eflags = regs->tf_eflags & PSL_T;
        bzero((char *)regs, sizeof(struct trapframe));
        regs->tf_eip = imgp->entry_addr;
        regs->tf_esp = stack;
        regs->tf_eflags = PSL_USER | saved_eflags;
        regs->tf_ss = _udatasel;
        regs->tf_ds = _udatasel;
        regs->tf_es = _udatasel;
        regs->tf_fs = _udatasel;
        regs->tf_cs = _ucodesel;

        /* PS_STRINGS value for BSD/OS binaries.  It is 0 for non-BSD/OS. */
        regs->tf_ebx = imgp->ps_strings;

        /*
         * Reset the hardware debug registers if they were in use.
         * They won't have any meaning for the newly exec'd process.  
         */
        if (pcb->pcb_flags & PCB_DBREGS) {
                pcb->pcb_dr0 = 0;
                pcb->pcb_dr1 = 0;
                pcb->pcb_dr2 = 0;
                pcb->pcb_dr3 = 0;
                pcb->pcb_dr6 = 0;
                pcb->pcb_dr7 = 0;
                if (pcb == curpcb) {
                        /*
                         * Clear the debug registers on the running
                         * CPU, otherwise they will end up affecting
                         * the next process we switch to.
                         */
                        reset_dbregs();
                }
                pcb->pcb_flags &= ~PCB_DBREGS;
        }

        pcb->pcb_initial_npxcw = __INITIAL_NPXCW__;

        /*
         * Drop the FP state if we hold it, so that the process gets a
         * clean FP state if it uses the FPU again.
         */
        fpstate_drop(td);

        /*
         * XXX - Linux emulator
         * Make sure sure edx is 0x0 on entry. Linux binaries depend
         * on it.
         */
        td->td_retval[1] = 0;
}

void
cpu_setregs(void)
{
        unsigned int cr0;

        cr0 = rcr0();

        /*
         * CR0_MP, CR0_NE and CR0_TS are set for NPX (FPU) support:
         *
         * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT
         * instructions.  We must set the CR0_MP bit and use the CR0_TS
         * bit to control the trap, because setting the CR0_EM bit does
         * not cause WAIT instructions to trap.  It's important to trap
         * WAIT instructions - otherwise the "wait" variants of no-wait
         * control instructions would degenerate to the "no-wait" variants
         * after FP context switches but work correctly otherwise.  It's
         * particularly important to trap WAITs when there is no NPX -
         * otherwise the "wait" variants would always degenerate.
         *
         * Try setting CR0_NE to get correct error reporting on 486DX's.
         * Setting it should fail or do nothing on lesser processors.
         */
        cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM;
        load_cr0(cr0);
        load_gs(_udatasel);
}

u_long bootdev;         /* not a struct cdev *- encoding is different */
SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev,
        CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)");

static char bootmethod[16] = "BIOS";
SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0,
    "System firmware boot method");

/*
 * Initialize 386 and configure to run kernel
 */

/*
 * Initialize segments & interrupt table
 */

int _default_ldt;

union descriptor gdt[NGDT * MAXCPU];    /* global descriptor table */
union descriptor ldt[NLDT];             /* local descriptor table */
static struct gate_descriptor idt0[NIDT];
struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */
struct region_descriptor r_gdt, r_idt;  /* table descriptors */
struct mtx dt_lock;                     /* lock for GDT and LDT */

static struct i386tss dblfault_tss;
static char dblfault_stack[PAGE_SIZE];

extern  vm_offset_t     proc0kstack;


/*
 * software prototypes -- in more palatable form.
 *
 * GCODE_SEL through GUDATA_SEL must be in this order for syscall/sysret
 * GUFS_SEL and GUGS_SEL must be in this order (swtch.s knows it)
 */
struct soft_segment_descriptor gdt_segs[] = {
/* GNULL_SEL    0 Null Descriptor */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = SEL_KPL,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
/* GPRIV_SEL    1 SMP Per-Processor Private Data Descriptor */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_KPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GUFS_SEL     2 %fs Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GUGS_SEL     3 %gs Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GCODE_SEL    4 Code Descriptor for kernel */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMERA,
        .ssd_dpl = SEL_KPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GDATA_SEL    5 Data Descriptor for kernel */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_KPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GUCODE_SEL   6 Code Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMERA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GUDATA_SEL   7 Data Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */
{       .ssd_base = 0x400,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_KPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GPROC0_SEL   9 Proc 0 Tss Descriptor */
{
        .ssd_base = 0x0,
        .ssd_limit = sizeof(struct i386tss)-1,
        .ssd_type = SDT_SYS386TSS,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
/* GLDT_SEL     10 LDT Descriptor */
{       .ssd_base = (int) ldt,
        .ssd_limit = sizeof(ldt)-1,
        .ssd_type = SDT_SYSLDT,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
/* GUSERLDT_SEL 11 User LDT Descriptor per process */
{       .ssd_base = (int) ldt,
        .ssd_limit = (512 * sizeof(union descriptor)-1),
        .ssd_type = SDT_SYSLDT,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
/* GPANIC_SEL   12 Panic Tss Descriptor */
{       .ssd_base = (int) &dblfault_tss,
        .ssd_limit = sizeof(struct i386tss)-1,
        .ssd_type = SDT_SYS386TSS,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
/* GBIOSCODE32_SEL 13 BIOS 32-bit interface (32bit Code) */
{       .ssd_base = 0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMERA,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 1           },
/* GBIOSCODE16_SEL 14 BIOS 32-bit interface (16bit Code) */
{       .ssd_base = 0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMERA,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 1           },
/* GBIOSDATA_SEL 15 BIOS 32-bit interface (Data) */
{       .ssd_base = 0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
/* GBIOSUTIL_SEL 16 BIOS 16-bit interface (Utility) */
{       .ssd_base = 0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 1           },
/* GBIOSARGS_SEL 17 BIOS 16-bit interface (Arguments) */
{       .ssd_base = 0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = 0,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 1           },
/* GNDIS_SEL    18 NDIS Descriptor */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = 0,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
};

static struct soft_segment_descriptor ldt_segs[] = {
        /* Null Descriptor - overwritten by call gate */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = 0,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
        /* Null Descriptor - overwritten by call gate */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = 0,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
        /* Null Descriptor - overwritten by call gate */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = 0,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
        /* Code Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMERA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
        /* Null Descriptor - overwritten by call gate */
{       .ssd_base = 0x0,
        .ssd_limit = 0x0,
        .ssd_type = 0,
        .ssd_dpl = 0,
        .ssd_p = 0,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 0,
        .ssd_gran = 0           },
        /* Data Descriptor for user */
{       .ssd_base = 0x0,
        .ssd_limit = 0xfffff,
        .ssd_type = SDT_MEMRWA,
        .ssd_dpl = SEL_UPL,
        .ssd_p = 1,
        .ssd_xx = 0, .ssd_xx1 = 0,
        .ssd_def32 = 1,
        .ssd_gran = 1           },
};

void
setidt(idx, func, typ, dpl, selec)
        int idx;
        inthand_t *func;
        int typ;
        int dpl;
        int selec;
{
        struct gate_descriptor *ip;

        ip = idt + idx;
        ip->gd_looffset = (int)func;
        ip->gd_selector = selec;
        ip->gd_stkcpy = 0;
        ip->gd_xx = 0;
        ip->gd_type = typ;
        ip->gd_dpl = dpl;
        ip->gd_p = 1;
        ip->gd_hioffset = ((int)func)>>16 ;
}

extern inthand_t
        IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl),
        IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm),
        IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot),
        IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align),
        IDTVEC(xmm),
#ifdef KDTRACE_HOOKS
        IDTVEC(dtrace_ret),
#endif
#ifdef XENHVM
        IDTVEC(xen_intr_upcall),
#endif
        IDTVEC(lcall_syscall), IDTVEC(int0x80_syscall);

#ifdef DDB
/*
 * Display the index and function name of any IDT entries that don't use
 * the default 'rsvd' entry point.
 */
DB_SHOW_COMMAND(idt, db_show_idt)
{
        struct gate_descriptor *ip;
        int idx;
        uintptr_t func;

        ip = idt;
        for (idx = 0; idx < NIDT && !db_pager_quit; idx++) {
                func = (ip->gd_hioffset << 16 | ip->gd_looffset);
                if (func != (uintptr_t)&IDTVEC(rsvd)) {
                        db_printf("%3d\t", idx);
                        db_printsym(func, DB_STGY_PROC);
                        db_printf("\n");
                }
                ip++;
        }
}

/* Show privileged registers. */
DB_SHOW_COMMAND(sysregs, db_show_sysregs)
{
        uint64_t idtr, gdtr;

        idtr = ridt();
        db_printf("idtr\t0x%08x/%04x\n",
            (u_int)(idtr >> 16), (u_int)idtr & 0xffff);
        gdtr = rgdt();
        db_printf("gdtr\t0x%08x/%04x\n",
            (u_int)(gdtr >> 16), (u_int)gdtr & 0xffff);
        db_printf("ldtr\t0x%04x\n", rldt());
        db_printf("tr\t0x%04x\n", rtr());
        db_printf("cr0\t0x%08x\n", rcr0());
        db_printf("cr2\t0x%08x\n", rcr2());
        db_printf("cr3\t0x%08x\n", rcr3());
        db_printf("cr4\t0x%08x\n", rcr4());
        if (rcr4() & CR4_XSAVE)
                db_printf("xcr0\t0x%016llx\n", rxcr(0));
        if (amd_feature & (AMDID_NX | AMDID_LM))
                db_printf("EFER\t0x%016llx\n", rdmsr(MSR_EFER));
        if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX))
                db_printf("FEATURES_CTL\t0x%016llx\n",
                    rdmsr(MSR_IA32_FEATURE_CONTROL));
        if ((cpu_vendor_id == CPU_VENDOR_INTEL ||
            cpu_vendor_id == CPU_VENDOR_AMD) && CPUID_TO_FAMILY(cpu_id) >= 6)
                db_printf("DEBUG_CTL\t0x%016llx\n", rdmsr(MSR_DEBUGCTLMSR));
        if (cpu_feature & CPUID_PAT)
                db_printf("PAT\t0x%016llx\n", rdmsr(MSR_PAT));
}

DB_SHOW_COMMAND(dbregs, db_show_dbregs)
{

        db_printf("dr0\t0x%08x\n", rdr0());
        db_printf("dr1\t0x%08x\n", rdr1());
        db_printf("dr2\t0x%08x\n", rdr2());
        db_printf("dr3\t0x%08x\n", rdr3());
        db_printf("dr6\t0x%08x\n", rdr6());
        db_printf("dr7\t0x%08x\n", rdr7());     
}
#endif

void
sdtossd(sd, ssd)
        struct segment_descriptor *sd;
        struct soft_segment_descriptor *ssd;
{
        ssd->ssd_base  = (sd->sd_hibase << 24) | sd->sd_lobase;
        ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit;
        ssd->ssd_type  = sd->sd_type;
        ssd->ssd_dpl   = sd->sd_dpl;
        ssd->ssd_p     = sd->sd_p;
        ssd->ssd_def32 = sd->sd_def32;
        ssd->ssd_gran  = sd->sd_gran;
}

#if !defined(PC98)
static int
add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap,
    int *physmap_idxp)
{
        int i, insert_idx, physmap_idx;

        physmap_idx = *physmap_idxp;
        
        if (length == 0)
                return (1);

#ifndef PAE
        if (base > 0xffffffff) {
                printf("%uK of memory above 4GB ignored\n",
                    (u_int)(length / 1024));
                return (1);
        }
#endif

        /*
         * Find insertion point while checking for overlap.  Start off by
         * assuming the new entry will be added to the end.
         */
        insert_idx = physmap_idx + 2;
        for (i = 0; i <= physmap_idx; i += 2) {
                if (base < physmap[i + 1]) {
                        if (base + length <= physmap[i]) {
                                insert_idx = i;
                                break;
                        }
                        if (boothowto & RB_VERBOSE)
                                printf(
                    "Overlapping memory regions, ignoring second region\n");
                        return (1);
                }
        }

        /* See if we can prepend to the next entry. */
        if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) {
                physmap[insert_idx] = base;
                return (1);
        }

        /* See if we can append to the previous entry. */
        if (insert_idx > 0 && base == physmap[insert_idx - 1]) {
                physmap[insert_idx - 1] += length;
                return (1);
        }

        physmap_idx += 2;
        *physmap_idxp = physmap_idx;
        if (physmap_idx == PHYSMAP_SIZE) {
                printf(
                "Too many segments in the physical address map, giving up\n");
                return (0);
        }

        /*
         * Move the last 'N' entries down to make room for the new
         * entry if needed.
         */
        for (i = physmap_idx; i > insert_idx; i -= 2) {
                physmap[i] = physmap[i - 2];
                physmap[i + 1] = physmap[i - 1];
        }

        /* Insert the new entry. */
        physmap[insert_idx] = base;
        physmap[insert_idx + 1] = base + length;
        return (1);
}

static int
add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp)
{
        if (boothowto & RB_VERBOSE)
                printf("SMAP type=%02x base=%016llx len=%016llx\n",
                    smap->type, smap->base, smap->length);

        if (smap->type != SMAP_TYPE_MEMORY)
                return (1);

        return (add_physmap_entry(smap->base, smap->length, physmap,
            physmap_idxp));
}

static void
add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap,
    int *physmap_idxp)
{
        struct bios_smap *smap, *smapend;
        u_int32_t smapsize;
        /*
         * Memory map from INT 15:E820.
         *
         * subr_module.c says:
         * "Consumer may safely assume that size value precedes data."
         * ie: an int32_t immediately precedes SMAP.
         */
        smapsize = *((u_int32_t *)smapbase - 1);
        smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize);

        for (smap = smapbase; smap < smapend; smap++)
                if (!add_smap_entry(smap, physmap, physmap_idxp))
                        break;
}
#endif /* !PC98 */

static void
basemem_setup(void)
{
        vm_paddr_t pa;
        pt_entry_t *pte;
        int i;

        if (basemem > 640) {
                printf("Preposterous BIOS basemem of %uK, truncating to 640K\n",
                        basemem);
                basemem = 640;
        }

        /*
         * XXX if biosbasemem is now < 640, there is a `hole'
         * between the end of base memory and the start of
         * ISA memory.  The hole may be empty or it may
         * contain BIOS code or data.  Map it read/write so
         * that the BIOS can write to it.  (Memory from 0 to
         * the physical end of the kernel is mapped read-only
         * to begin with and then parts of it are remapped.
         * The parts that aren't remapped form holes that
         * remain read-only and are unused by the kernel.
         * The base memory area is below the physical end of
         * the kernel and right now forms a read-only hole.
         * The part of it from PAGE_SIZE to
         * (trunc_page(biosbasemem * 1024) - 1) will be
         * remapped and used by the kernel later.)
         *
         * This code is similar to the code used in
         * pmap_mapdev, but since no memory needs to be
         * allocated we simply change the mapping.
         */
        for (pa = trunc_page(basemem * 1024);
             pa < ISA_HOLE_START; pa += PAGE_SIZE)
                pmap_kenter(KERNBASE + pa, pa);

        /*
         * Map pages between basemem and ISA_HOLE_START, if any, r/w into
         * the vm86 page table so that vm86 can scribble on them using
         * the vm86 map too.  XXX: why 2 ways for this and only 1 way for
         * page 0, at least as initialized here?
         */
        pte = (pt_entry_t *)vm86paddr;
        for (i = basemem / 4; i < 160; i++)
                pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U;
}

/*
 * Populate the (physmap) array with base/bound pairs describing the
 * available physical memory in the system, then test this memory and
 * build the phys_avail array describing the actually-available memory.
 *
 * If we cannot accurately determine the physical memory map, then use
 * value from the 0xE801 call, and failing that, the RTC.
 *
 * Total memory size may be set by the kernel environment variable
 * hw.physmem or the compile-time define MAXMEM.
 *
 * XXX first should be vm_paddr_t.
 */
#ifdef PC98
static void
getmemsize(int first)
{
        int off, physmap_idx, pa_indx, da_indx;
        u_long physmem_tunable, memtest;
        vm_paddr_t physmap[PHYSMAP_SIZE];
        pt_entry_t *pte;
        quad_t dcons_addr, dcons_size;
        int i;
        int pg_n;
        u_int extmem;
        u_int under16;
        vm_paddr_t pa;

        bzero(physmap, sizeof(physmap));

        /* XXX - some of EPSON machines can't use PG_N */
        pg_n = PG_N;
        if (pc98_machine_type & M_EPSON_PC98) {
                switch (epson_machine_id) {
#ifdef WB_CACHE
                default:
#endif
                case EPSON_PC486_HX:
                case EPSON_PC486_HG:
                case EPSON_PC486_HA:
                        pg_n = 0;
                        break;
                }
        }

        under16 = pc98_getmemsize(&basemem, &extmem);
        basemem_setup();

        physmap[0] = 0;
        physmap[1] = basemem * 1024;
        physmap_idx = 2;
        physmap[physmap_idx] = 0x100000;
        physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024;

        /*
         * Now, physmap contains a map of physical memory.
         */

#ifdef SMP
        /* make hole for AP bootstrap code */
        physmap[1] = mp_bootaddress(physmap[1]);
#endif

        /*
         * Maxmem isn't the "maximum memory", it's one larger than the
         * highest page of the physical address space.  It should be
         * called something like "Maxphyspage".  We may adjust this 
         * based on ``hw.physmem'' and the results of the memory test.
         */
        Maxmem = atop(physmap[physmap_idx + 1]);

#ifdef MAXMEM
        Maxmem = MAXMEM / 4;
#endif

        if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable))
                Maxmem = atop(physmem_tunable);

        /*
         * By default keep the memtest enabled.  Use a general name so that
         * one could eventually do more with the code than just disable it.
         */
        memtest = 1;
        TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest);

        if (atop(physmap[physmap_idx + 1]) != Maxmem &&
            (boothowto & RB_VERBOSE))
                printf("Physical memory use set to %ldK\n", Maxmem * 4);

        /*
         * If Maxmem has been increased beyond what the system has detected,
         * extend the last memory segment to the new limit.
         */ 
        if (atop(physmap[physmap_idx + 1]) < Maxmem)
                physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem);

        /*
         * We need to divide chunk if Maxmem is larger than 16MB and
         * under 16MB area is not full of memory.
         * (1) system area (15-16MB region) is cut off
         * (2) extended memory is only over 16MB area (ex. Melco "HYPERMEMORY")
         */
        if ((under16 != 16 * 1024) && (extmem > 15 * 1024)) {
                /* 15M - 16M region is cut off, so need to divide chunk */
                physmap[physmap_idx + 1] = under16 * 1024;
                physmap_idx += 2;
                physmap[physmap_idx] = 0x1000000;
                physmap[physmap_idx + 1] = physmap[2] + extmem * 1024;
        }

        /* call pmap initialization to make new kernel address space */
        pmap_bootstrap(first);

        /*
         * Size up each available chunk of physical memory.
         */
        physmap[0] = PAGE_SIZE;         /* mask off page 0 */
        pa_indx = 0;
        da_indx = 1;
        phys_avail[pa_indx++] = physmap[0];
        phys_avail[pa_indx] = physmap[0];
        dump_avail[da_indx] = physmap[0];
        pte = CMAP3;

        /*
         * Get dcons buffer address
         */
        if (getenv_quad("dcons.addr", &dcons_addr) == 0 ||
            getenv_quad("dcons.size", &dcons_size) == 0)
                dcons_addr = 0;

        /*
         * physmap is in bytes, so when converting to page boundaries,
         * round up the start address and round down the end address.
         */
        for (i = 0; i <= physmap_idx; i += 2) {
                vm_paddr_t end;

                end = ptoa((vm_paddr_t)Maxmem);
                if (physmap[i + 1] < end)
                        end = trunc_page(physmap[i + 1]);
                for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) {
                        int tmp, page_bad, full;
                        int *ptr = (int *)CADDR3;

                        full = FALSE;
                        /*
                         * block out kernel memory as not available.
                         */
                        if (pa >= KERNLOAD && pa < first)
                                goto do_dump_avail;

                        /*
                         * block out dcons buffer
                         */
                        if (dcons_addr > 0
                            && pa >= trunc_page(dcons_addr)
                            && pa < dcons_addr + dcons_size)
                                goto do_dump_avail;

                        page_bad = FALSE;
                        if (memtest == 0)
                                goto skip_memtest;

                        /*
                         * map page into kernel: valid, read/write,non-cacheable
                         */
                        *pte = pa | PG_V | PG_RW | pg_n;
                        invltlb();

                        tmp = *(int *)ptr;
                        /*
                         * Test for alternating 1's and 0's
                         */
                        *(volatile int *)ptr = 0xaaaaaaaa;
                        if (*(volatile int *)ptr != 0xaaaaaaaa)
                                page_bad = TRUE;
                        /*
                         * Test for alternating 0's and 1's
                         */
                        *(volatile int *)ptr = 0x55555555;
                        if (*(volatile int *)ptr != 0x55555555)
                                page_bad = TRUE;
                        /*
                         * Test for all 1's
                         */
                        *(volatile int *)ptr = 0xffffffff;
                        if (*(volatile int *)ptr != 0xffffffff)
                                page_bad = TRUE;
                        /*
                         * Test for all 0's
                         */
                        *(volatile int *)ptr = 0x0;
                        if (*(volatile int *)ptr != 0x0)
                                page_bad = TRUE;
                        /*
                         * Restore original value.
                         */
                        *(int *)ptr = tmp;

skip_memtest:
                        /*
                         * Adjust array of valid/good pages.
                         */
                        if (page_bad == TRUE)
                                continue;
                        /*
                         * If this good page is a continuation of the
                         * previous set of good pages, then just increase
                         * the end pointer. Otherwise start a new chunk.
                         * Note that "end" points one higher than end,
                         * making the range >= start and < end.
                         * If we're also doing a speculative memory
                         * test and we at or past the end, bump up Maxmem
                         * so that we keep going. The first bad page
                         * will terminate the loop.
                         */
                        if (phys_avail[pa_indx] == pa) {
                                phys_avail[pa_indx] += PAGE_SIZE;
                        } else {
                                pa_indx++;
                                if (pa_indx == PHYS_AVAIL_ARRAY_END) {
                                        printf(
                "Too many holes in the physical address space, giving up\n");
                                        pa_indx--;
                                        full = TRUE;
                                        goto do_dump_avail;
                                }
                                phys_avail[pa_indx++] = pa;     /* start */
                                phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */
                        }
                        physmem++;
do_dump_avail:
                        if (dump_avail[da_indx] == pa) {
                                dump_avail[da_indx] += PAGE_SIZE;
                        } else {
                                da_indx++;
                                if (da_indx == DUMP_AVAIL_ARRAY_END) {
                                        da_indx--;
                                        goto do_next;
                                }
                                dump_avail[da_indx++] = pa;     /* start */
                                dump_avail[da_indx] = pa + PAGE_SIZE; /* end */
                        }
do_next:
                        if (full)
                                break;
                }
        }
        *pte = 0;
        invltlb();
        
        /*
         * XXX
         * The last chunk must contain at least one page plus the message
         * buffer to avoid complicating other code (message buffer address
         * calculation, etc.).
         */
        while (phys_avail[pa_indx - 1] + PAGE_SIZE +
            round_page(msgbufsize) >= phys_avail[pa_indx]) {
                physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]);
                phys_avail[pa_indx--] = 0;
                phys_avail[pa_indx--] = 0;
        }

        Maxmem = atop(phys_avail[pa_indx]);

        /* Trim off space for the message buffer. */
        phys_avail[pa_indx] -= round_page(msgbufsize);

        /* Map the message buffer. */
        for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE)
                pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] +
                    off);
}
#else /* PC98 */
static void
getmemsize(int first)
{
        int has_smap, off, physmap_idx, pa_indx, da_indx;
        u_long memtest;
        vm_paddr_t physmap[PHYSMAP_SIZE];
        pt_entry_t *pte;
        quad_t dcons_addr, dcons_size, physmem_tunable;
        int hasbrokenint12, i, res;
        u_int extmem;
        struct vm86frame vmf;
        struct vm86context vmc;
        vm_paddr_t pa;
        struct bios_smap *smap, *smapbase;
        caddr_t kmdp;

        has_smap = 0;
#ifdef XBOX
        if (arch_i386_is_xbox) {
                /*
                 * We queried the memory size before, so chop off 4MB for
                 * the framebuffer and inform the OS of this.
                 */
                physmap[0] = 0;
                physmap[1] = (arch_i386_xbox_memsize * 1024 * 1024) - XBOX_FB_SIZE;
                physmap_idx = 0;
                goto physmap_done;
        }
#endif
        bzero(&vmf, sizeof(vmf));
        bzero(physmap, sizeof(physmap));
        basemem = 0;

        /*
         * Tell the physical memory allocator about pages used to store
         * the kernel and preloaded data.  See kmem_bootstrap_free().
         */
        vm_phys_add_seg((vm_paddr_t)KERNLOAD, trunc_page(first));

        /*
         * Check if the loader supplied an SMAP memory map.  If so,
         * use that and do not make any VM86 calls.
         */
        physmap_idx = 0;
        kmdp = preload_search_by_type("elf kernel");
        if (kmdp == NULL)
                kmdp = preload_search_by_type("elf32 kernel");
        smapbase = (struct bios_smap *)preload_search_info(kmdp,
            MODINFO_METADATA | MODINFOMD_SMAP);
        if (smapbase != NULL) {
                add_smap_entries(smapbase, physmap, &physmap_idx);
                has_smap = 1;
                goto have_smap;
        }

        /*
         * Some newer BIOSes have a broken INT 12H implementation
         * which causes a kernel panic immediately.  In this case, we
         * need use the SMAP to determine the base memory size.
         */
        hasbrokenint12 = 0;
        TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12);
        if (hasbrokenint12 == 0) {
                /* Use INT12 to determine base memory size. */
                vm86_intcall(0x12, &vmf);
                basemem = vmf.vmf_ax;
                basemem_setup();
        }

        /*
         * Fetch the memory map with INT 15:E820.  Map page 1 R/W into
         * the kernel page table so we can use it as a buffer.  The
         * kernel will unmap this page later.
         */
        pmap_kenter(KERNBASE + (1 << PAGE_SHIFT), 1 << PAGE_SHIFT);
        vmc.npages = 0;
        smap = (void *)vm86_addpage(&vmc, 1, KERNBASE + (1 << PAGE_SHIFT));
        res = vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di);
        KASSERT(res != 0, ("vm86_getptr() failed: address not found"));

        vmf.vmf_ebx = 0;
        do {
                vmf.vmf_eax = 0xE820;
                vmf.vmf_edx = SMAP_SIG;
                vmf.vmf_ecx = sizeof(struct bios_smap);
                i = vm86_datacall(0x15, &vmf, &vmc);
                if (i || vmf.vmf_eax != SMAP_SIG)
                        break;
                has_smap = 1;
                if (!add_smap_entry(smap, physmap, &physmap_idx))
                        break;
        } while (vmf.vmf_ebx != 0);

have_smap:
        /*
         * If we didn't fetch the "base memory" size from INT12,
         * figure it out from the SMAP (or just guess).
         */
        if (basemem == 0) {
                for (i = 0; i <= physmap_idx; i += 2) {
                        if (physmap[i] == 0x00000000) {
                                basemem = physmap[i + 1] / 1024;
                                break;
                        }
                }

                /* XXX: If we couldn't find basemem from SMAP, just guess. */
                if (basemem == 0)
                        basemem = 640;
                basemem_setup();
        }

        if (physmap[1] != 0)
                goto physmap_done;

        /*
         * If we failed to find an SMAP, figure out the extended
         * memory size.  We will then build a simple memory map with
         * two segments, one for "base memory" and the second for
         * "extended memory".  Note that "extended memory" starts at a
         * physical address of 1MB and that both basemem and extmem
         * are in units of 1KB.
         *
         * First, try to fetch the extended memory size via INT 15:E801.
         */
        vmf.vmf_ax = 0xE801;
        if (vm86_intcall(0x15, &vmf) == 0) {
                extmem = vmf.vmf_cx + vmf.vmf_dx * 64;
        } else {
                /*
                 * If INT15:E801 fails, this is our last ditch effort
                 * to determine the extended memory size.  Currently
                 * we prefer the RTC value over INT15:88.
                 */
#if 0
                vmf.vmf_ah = 0x88;
                vm86_intcall(0x15, &vmf);
                extmem = vmf.vmf_ax;
#else
                extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8);
#endif
        }

        /*
         * Special hack for chipsets that still remap the 384k hole when
         * there's 16MB of memory - this really confuses people that
         * are trying to use bus mastering ISA controllers with the
         * "16MB limit"; they only have 16MB, but the remapping puts
         * them beyond the limit.
         *
         * If extended memory is between 15-16MB (16-17MB phys address range),
         *      chop it to 15MB.
         */
        if ((extmem > 15 * 1024) && (extmem < 16 * 1024))
                extmem = 15 * 1024;

        physmap[0] = 0;
        physmap[1] = basemem * 1024;
        physmap_idx = 2;
        physmap[physmap_idx] = 0x100000;
        physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024;

physmap_done:
        /*
         * Now, physmap contains a map of physical memory.
         */

#ifdef SMP
        /* make hole for AP bootstrap code */
        physmap[1] = mp_bootaddress(physmap[1]);
#endif

        /*
         * Maxmem isn't the "maximum memory", it's one larger than the
         * highest page of the physical address space.  It should be
         * called something like "Maxphyspage".  We may adjust this 
         * based on ``hw.physmem'' and the results of the memory test.
         *
         * This is especially confusing when it is much larger than the
         * memory size and is displayed as "realmem".
         */
        Maxmem = atop(physmap[physmap_idx + 1]);

#ifdef MAXMEM
        Maxmem = MAXMEM / 4;
#endif

        if (TUNABLE_QUAD_FETCH("hw.physmem", &physmem_tunable))
                Maxmem = atop(physmem_tunable);

        /*
         * If we have an SMAP, don't allow MAXMEM or hw.physmem to extend
         * the amount of memory in the system.
         */
        if (has_smap && Maxmem > atop(physmap[physmap_idx + 1]))
                Maxmem = atop(physmap[physmap_idx + 1]);

        /*
         * By default enable the memory test on real hardware, and disable
         * it if we appear to be running in a VM.  This avoids touching all
         * pages unnecessarily, which doesn't matter on real hardware but is
         * bad for shared VM hosts.  Use a general name so that
         * one could eventually do more with the code than just disable it.
         */
        memtest = (vm_guest > VM_GUEST_NO) ? 0 : 1;
        TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest);

        if (atop(physmap[physmap_idx + 1]) != Maxmem &&
            (boothowto & RB_VERBOSE))
                printf("Physical memory use set to %ldK\n", Maxmem * 4);

        /*
         * If Maxmem has been increased beyond what the system has detected,
         * extend the last memory segment to the new limit.
         */ 
        if (atop(physmap[physmap_idx + 1]) < Maxmem)
                physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem);

        /* call pmap initialization to make new kernel address space */
        pmap_bootstrap(first);

        /*
         * Size up each available chunk of physical memory.
         */
        physmap[0] = PAGE_SIZE;         /* mask off page 0 */
        pa_indx = 0;
        da_indx = 1;
        phys_avail[pa_indx++] = physmap[0];
        phys_avail[pa_indx] = physmap[0];
        dump_avail[da_indx] = physmap[0];
        pte = CMAP3;

        /*
         * Get dcons buffer address
         */
        if (getenv_quad("dcons.addr", &dcons_addr) == 0 ||
            getenv_quad("dcons.size", &dcons_size) == 0)
                dcons_addr = 0;

        /*
         * physmap is in bytes, so when converting to page boundaries,
         * round up the start address and round down the end address.
         */
        for (i = 0; i <= physmap_idx; i += 2) {
                vm_paddr_t end;

                end = ptoa((vm_paddr_t)Maxmem);
                if (physmap[i + 1] < end)
                        end = trunc_page(physmap[i + 1]);
                for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) {
                        int tmp, page_bad, full;
                        int *ptr = (int *)CADDR3;

                        full = FALSE;
                        /*
                         * block out kernel memory as not available.
                         */
                        if (pa >= KERNLOAD && pa < first)
                                goto do_dump_avail;

                        /*
                         * block out dcons buffer
                         */
                        if (dcons_addr > 0
                            && pa >= trunc_page(dcons_addr)
                            && pa < dcons_addr + dcons_size)
                                goto do_dump_avail;

                        page_bad = FALSE;
                        if (memtest == 0)
                                goto skip_memtest;

                        /*
                         * map page into kernel: valid, read/write,non-cacheable
                         */
                        *pte = pa | PG_V | PG_RW | PG_N;
                        invltlb();

                        tmp = *(int *)ptr;
                        /*
                         * Test for alternating 1's and 0's
                         */
                        *(volatile int *)ptr = 0xaaaaaaaa;
                        if (*(volatile int *)ptr != 0xaaaaaaaa)
                                page_bad = TRUE;
                        /*
                         * Test for alternating 0's and 1's
                         */
                        *(volatile int *)ptr = 0x55555555;
                        if (*(volatile int *)ptr != 0x55555555)
                                page_bad = TRUE;
                        /*
                         * Test for all 1's
                         */
                        *(volatile int *)ptr = 0xffffffff;
                        if (*(volatile int *)ptr != 0xffffffff)
                                page_bad = TRUE;
                        /*
                         * Test for all 0's
                         */
                        *(volatile int *)ptr = 0x0;
                        if (*(volatile int *)ptr != 0x0)
                                page_bad = TRUE;
                        /*
                         * Restore original value.
                         */
                        *(int *)ptr = tmp;

skip_memtest:
                        /*
                         * Adjust array of valid/good pages.
                         */
                        if (page_bad == TRUE)
                                continue;
                        /*
                         * If this good page is a continuation of the
                         * previous set of good pages, then just increase
                         * the end pointer. Otherwise start a new chunk.
                         * Note that "end" points one higher than end,
                         * making the range >= start and < end.
                         * If we're also doing a speculative memory
                         * test and we at or past the end, bump up Maxmem
                         * so that we keep going. The first bad page
                         * will terminate the loop.
                         */
                        if (phys_avail[pa_indx] == pa) {
                                phys_avail[pa_indx] += PAGE_SIZE;
                        } else {
                                pa_indx++;
                                if (pa_indx == PHYS_AVAIL_ARRAY_END) {
                                        printf(
                "Too many holes in the physical address space, giving up\n");
                                        pa_indx--;
                                        full = TRUE;
                                        goto do_dump_avail;
                                }
                                phys_avail[pa_indx++] = pa;     /* start */
                                phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */
                        }
                        physmem++;
do_dump_avail:
                        if (dump_avail[da_indx] == pa) {
                                dump_avail[da_indx] += PAGE_SIZE;
                        } else {
                                da_indx++;
                                if (da_indx == DUMP_AVAIL_ARRAY_END) {
                                        da_indx--;
                                        goto do_next;
                                }
                                dump_avail[da_indx++] = pa;     /* start */
                                dump_avail[da_indx] = pa + PAGE_SIZE; /* end */
                        }
do_next:
                        if (full)
                                break;
                }
        }
        *pte = 0;
        invltlb();
        
        /*
         * XXX
         * The last chunk must contain at least one page plus the message
         * buffer to avoid complicating other code (message buffer address
         * calculation, etc.).
         */
        while (phys_avail[pa_indx - 1] + PAGE_SIZE +
            round_page(msgbufsize) >= phys_avail[pa_indx]) {
                physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]);
                phys_avail[pa_indx--] = 0;
                phys_avail[pa_indx--] = 0;
        }

        Maxmem = atop(phys_avail[pa_indx]);

        /* Trim off space for the message buffer. */
        phys_avail[pa_indx] -= round_page(msgbufsize);

        /* Map the message buffer. */
        for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE)
                pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] +
                    off);
}
#endif /* PC98 */

static void
i386_kdb_init(void)
{
#ifdef DDB
        db_fetch_ksymtab(bootinfo.bi_symtab, bootinfo.bi_esymtab);
#endif
        kdb_init();
#ifdef KDB
        if (boothowto & RB_KDB)
                kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}

register_t
init386(int first)
{
        struct gate_descriptor *gdp;
        int gsel_tss, metadata_missing, x, pa;
        struct pcpu *pc;
        struct xstate_hdr *xhdr;
        caddr_t kmdp;
        size_t ucode_len;
        int late_console;

        thread0.td_kstack = proc0kstack;
        thread0.td_kstack_pages = TD0_KSTACK_PAGES;

        /*
         * This may be done better later if it gets more high level
         * components in it. If so just link td->td_proc here.
         */
        proc_linkup0(&proc0, &thread0);

#ifdef PC98
        /*
         * Initialize DMAC
         */
        pc98_init_dmac();
#endif

        metadata_missing = 0;
        if (bootinfo.bi_modulep) {
                preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE;
                preload_bootstrap_relocate(KERNBASE);
        } else {
                metadata_missing = 1;
        }

        if (bootinfo.bi_envp != 0)
                init_static_kenv((char *)bootinfo.bi_envp + KERNBASE, 0);
        else
                init_static_kenv(NULL, 0);

        /*
         * Re-evaluate CPU features if we loaded a microcode update.
         */
        ucode_len = ucode_load_bsp(first);
        if (ucode_len != 0) {
                identify_cpu();
                first = roundup2(first + ucode_len, PAGE_SIZE);
        }

        identify_hypervisor();

        /* Init basic tunables, hz etc */
        init_param1();

        /*
         * Make gdt memory segments.  All segments cover the full 4GB
         * of address space and permissions are enforced at page level.
         */
        gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GUCODE_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GUDATA_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GUFS_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GUGS_SEL].ssd_limit = atop(0 - 1);

        pc = &__pcpu[0];
        gdt_segs[GPRIV_SEL].ssd_limit = atop(0 - 1);
        gdt_segs[GPRIV_SEL].ssd_base = (int) pc;
        gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss;

        for (x = 0; x < NGDT; x++)
                ssdtosd(&gdt_segs[x], &gdt[x].sd);

        r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
        r_gdt.rd_base =  (int) gdt;
        mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN);
        lgdt(&r_gdt);

        pcpu_init(pc, 0, sizeof(struct pcpu));
        for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE)
                pmap_kenter(pa + KERNBASE, pa);
        dpcpu_init((void *)(first + KERNBASE), 0);
        first += DPCPU_SIZE;
        PCPU_SET(prvspace, pc);
        PCPU_SET(curthread, &thread0);
        /* Non-late cninit() and printf() can be moved up to here. */

        /*
         * Initialize mutexes.
         *
         * icu_lock: in order to allow an interrupt to occur in a critical
         *           section, to set pcpu->ipending (etc...) properly, we
         *           must be able to get the icu lock, so it can't be
         *           under witness.
         */
        mutex_init();
        mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE);

        /* make ldt memory segments */
        ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1);
        ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1);
        for (x = 0; x < nitems(ldt_segs); x++)
                ssdtosd(&ldt_segs[x], &ldt[x].sd);

        _default_ldt = GSEL(GLDT_SEL, SEL_KPL);
        lldt(_default_ldt);
        PCPU_SET(currentldt, _default_ldt);

        /* exceptions */
        for (x = 0; x < NIDT; x++)
                setidt(x, &IDTVEC(rsvd), SDT_SYS386TGT, SEL_KPL,
                    GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_DE, &IDTVEC(div),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_DB, &IDTVEC(dbg),  SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_NMI, &IDTVEC(nmi),  SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_BP, &IDTVEC(bpt),  SDT_SYS386IGT, SEL_UPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_OF, &IDTVEC(ofl),  SDT_SYS386TGT, SEL_UPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_BR, &IDTVEC(bnd),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_UD, &IDTVEC(ill),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_NM, &IDTVEC(dna),  SDT_SYS386TGT, SEL_KPL
            , GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_DF, 0,  SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL));
        setidt(IDT_FPUGP, &IDTVEC(fpusegm),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_TS, &IDTVEC(tss),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_NP, &IDTVEC(missing),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_SS, &IDTVEC(stk),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_GP, &IDTVEC(prot),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_PF, &IDTVEC(page),  SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_MF, &IDTVEC(fpu),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_AC, &IDTVEC(align), SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_MC, &IDTVEC(mchk),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), SDT_SYS386TGT, SEL_UPL,
            GSEL(GCODE_SEL, SEL_KPL));
#ifdef KDTRACE_HOOKS
        setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYS386TGT, SEL_UPL,
            GSEL(GCODE_SEL, SEL_KPL));
#endif
#ifdef XENHVM
        setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
#endif

        r_idt.rd_limit = sizeof(idt0) - 1;
        r_idt.rd_base = (int) idt;
        lidt(&r_idt);

#ifdef XBOX
        /*
         * The following code queries the PCI ID of 0:0:0. For the XBOX,
         * This should be 0x10de / 0x02a5.
         *
         * This is exactly what Linux does.
         */
        outl(0xcf8, 0x80000000);
        if (inl(0xcfc) == 0x02a510de) {
                arch_i386_is_xbox = 1;
                pic16l_setled(XBOX_LED_GREEN);

                /*
                 * We are an XBOX, but we may have either 64MB or 128MB of
                 * memory. The PCI host bridge should be programmed for this,
                 * so we just query it. 
                 */
                outl(0xcf8, 0x80000084);
                arch_i386_xbox_memsize = (inl(0xcfc) == 0x7FFFFFF) ? 128 : 64;
        }
#endif /* XBOX */

        /*
         * Initialize the clock before the console so that console
         * initialization can use DELAY().
         */
        clock_init();

        finishidentcpu();       /* Final stage of CPU initialization */
        setidt(IDT_UD, &IDTVEC(ill),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_GP, &IDTVEC(prot),  SDT_SYS386TGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        initializecpu();        /* Initialize CPU registers */
        initializecpucache();

        /* pointer to selector slot for %fs/%gs */
        PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd);

        dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 =
            dblfault_tss.tss_esp2 = (int)&dblfault_stack[sizeof(dblfault_stack)];
        dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 =
            dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL);
#if defined(PAE) || defined(PAE_TABLES)
        dblfault_tss.tss_cr3 = (int)IdlePDPT;
#else
        dblfault_tss.tss_cr3 = (int)IdlePTD;
#endif
        dblfault_tss.tss_eip = (int)dblfault_handler;
        dblfault_tss.tss_eflags = PSL_KERNEL;
        dblfault_tss.tss_ds = dblfault_tss.tss_es =
            dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL);
        dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL);
        dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL);
        dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL);

        /* Initialize the tss (except for the final esp0) early for vm86. */
        PCPU_SET(common_tss.tss_esp0, thread0.td_kstack +
            thread0.td_kstack_pages * PAGE_SIZE - 16);
        PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL));
        gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
        PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd);
        PCPU_SET(common_tssd, *PCPU_GET(tss_gdt));
        PCPU_SET(common_tss.tss_ioopt, (sizeof (struct i386tss)) << 16);
        ltr(gsel_tss);

        /* Initialize the PIC early for vm86 calls. */
#ifdef DEV_ISA
#ifdef DEV_ATPIC
#ifndef PC98
        elcr_probe();
#endif
        atpic_startup();
#else
        /* Reset and mask the atpics and leave them shut down. */
        atpic_reset();

        /*
         * Point the ICU spurious interrupt vectors at the APIC spurious
         * interrupt handler.
         */
        setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
        setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL,
            GSEL(GCODE_SEL, SEL_KPL));
#endif
#endif

        /*
         * The console and kdb should be initialized even earlier than here,
         * but some console drivers don't work until after getmemsize().
         * Default to late console initialization to support these drivers.
         * This loses mainly printf()s in getmemsize() and early debugging.
         */
        late_console = 1;
        TUNABLE_INT_FETCH("debug.late_console", &late_console);
        if (!late_console) {
                cninit();
                i386_kdb_init();
        }

        kmdp = preload_search_by_type("elf kernel");
        link_elf_ireloc(kmdp);

        vm86_initialize();
        getmemsize(first);
        init_param2(physmem);

        /* now running on new page tables, configured,and u/iom is accessible */

        if (late_console)
                cninit();

        if (metadata_missing)
                printf("WARNING: loader(8) metadata is missing!\n");

        if (late_console)
                i386_kdb_init();

        msgbufinit(msgbufp, msgbufsize);
        npxinit(true);
        /*
         * Set up thread0 pcb after npxinit calculated pcb + fpu save
         * area size.  Zero out the extended state header in fpu save
         * area.
         */
        thread0.td_pcb = get_pcb_td(&thread0);
        thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0);
        bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size);
        if (use_xsave) {
                xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) +
                    1);
                xhdr->xstate_bv = xsave_mask;
        }
        PCPU_SET(curpcb, thread0.td_pcb);
        /* Move esp0 in the tss to its final place. */
        /* Note: -16 is so we can grow the trapframe if we came from vm86 */
        PCPU_SET(common_tss.tss_esp0, (vm_offset_t)thread0.td_pcb - 16);
        gdt[GPROC0_SEL].sd.sd_type = SDT_SYS386TSS;     /* clear busy bit */
        ltr(gsel_tss);

        /* make a call gate to reenter kernel with */
        gdp = &ldt[LSYS5CALLS_SEL].gd;

        x = (int) &IDTVEC(lcall_syscall);
        gdp->gd_looffset = x;
        gdp->gd_selector = GSEL(GCODE_SEL,SEL_KPL);
        gdp->gd_stkcpy = 1;
        gdp->gd_type = SDT_SYS386CGT;
        gdp->gd_dpl = SEL_UPL;
        gdp->gd_p = 1;
        gdp->gd_hioffset = x >> 16;

        /* XXX does this work? */
        /* XXX yes! */
        ldt[LBSDICALLS_SEL] = ldt[LSYS5CALLS_SEL];
        ldt[LSOL26CALLS_SEL] = ldt[LSYS5CALLS_SEL];

        /* transfer to user mode */

        _ucodesel = GSEL(GUCODE_SEL, SEL_UPL);
        _udatasel = GSEL(GUDATA_SEL, SEL_UPL);

        /* setup proc 0's pcb */
        thread0.td_pcb->pcb_flags = 0;
#if defined(PAE) || defined(PAE_TABLES)
        thread0.td_pcb->pcb_cr3 = (int)IdlePDPT;
#else
        thread0.td_pcb->pcb_cr3 = (int)IdlePTD;
#endif
        thread0.td_pcb->pcb_ext = 0;
        thread0.td_frame = &proc0_tf;

        cpu_probe_amdc1e();

#ifdef FDT
        x86_init_fdt();
#endif

        /* Location of kernel stack for locore */
        return ((register_t)thread0.td_pcb);
}

void
cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size)
{

        pcpu->pc_acpi_id = 0xffffffff;
}

#ifndef PC98
static int
smap_sysctl_handler(SYSCTL_HANDLER_ARGS)
{
        struct bios_smap *smapbase;
        struct bios_smap_xattr smap;
        caddr_t kmdp;
        uint32_t *smapattr;
        int count, error, i;

        /* Retrieve the system memory map from the loader. */
        kmdp = preload_search_by_type("elf kernel");
        if (kmdp == NULL)
                kmdp = preload_search_by_type("elf32 kernel");
        smapbase = (struct bios_smap *)preload_search_info(kmdp,
            MODINFO_METADATA | MODINFOMD_SMAP);
        if (smapbase == NULL)
                return (0);
        smapattr = (uint32_t *)preload_search_info(kmdp,
            MODINFO_METADATA | MODINFOMD_SMAP_XATTR);
        count = *((u_int32_t *)smapbase - 1) / sizeof(*smapbase);
        error = 0;
        for (i = 0; i < count; i++) {
                smap.base = smapbase[i].base;
                smap.length = smapbase[i].length;
                smap.type = smapbase[i].type;
                if (smapattr != NULL)
                        smap.xattr = smapattr[i];
                else
                        smap.xattr = 0;
                error = SYSCTL_OUT(req, &smap, sizeof(smap));
        }
        return (error);
}
SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0,
    smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data");
#endif /* !PC98 */

void
spinlock_enter(void)
{
        struct thread *td;
        register_t flags;

        td = curthread;
        if (td->td_md.md_spinlock_count == 0) {
                flags = intr_disable();
                td->td_md.md_spinlock_count = 1;
                td->td_md.md_saved_flags = flags;
        } else
                td->td_md.md_spinlock_count++;
        critical_enter();
}

void
spinlock_exit(void)
{
        struct thread *td;
        register_t flags;

        td = curthread;
        critical_exit();
        flags = td->td_md.md_saved_flags;
        td->td_md.md_spinlock_count--;
        if (td->td_md.md_spinlock_count == 0)
                intr_restore(flags);
}

#if defined(I586_CPU) && !defined(NO_F00F_HACK)
static void f00f_hack(void *unused);
SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL);

static void
f00f_hack(void *unused)
{
        struct gate_descriptor *new_idt;
        vm_offset_t tmp;

        if (!has_f00f_bug)
                return;

        GIANT_REQUIRED;

        printf("Intel Pentium detected, installing workaround for F00F bug\n");

        tmp = kmem_malloc(kernel_arena, PAGE_SIZE * 2, M_WAITOK | M_ZERO);
        if (tmp == 0)
                panic("kmem_malloc returned 0");

        /* Put the problematic entry (#6) at the end of the lower page. */
        new_idt = (struct gate_descriptor*)
            (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor));
        bcopy(idt, new_idt, sizeof(idt0));
        r_idt.rd_base = (u_int)new_idt;
        lidt(&r_idt);
        idt = new_idt;
        pmap_protect(kernel_pmap, tmp, tmp + PAGE_SIZE, VM_PROT_READ);
}
#endif /* defined(I586_CPU) && !NO_F00F_HACK */

/*
 * Construct a PCB from a trapframe. This is called from kdb_trap() where
 * we want to start a backtrace from the function that caused us to enter
 * the debugger. We have the context in the trapframe, but base the trace
 * on the PCB. The PCB doesn't have to be perfect, as long as it contains
 * enough for a backtrace.
 */
void
makectx(struct trapframe *tf, struct pcb *pcb)
{

        pcb->pcb_edi = tf->tf_edi;
        pcb->pcb_esi = tf->tf_esi;
        pcb->pcb_ebp = tf->tf_ebp;
        pcb->pcb_ebx = tf->tf_ebx;
        pcb->pcb_eip = tf->tf_eip;
        pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8;
        pcb->pcb_gs = rgs();
}

int
ptrace_set_pc(struct thread *td, u_long addr)
{

        td->td_frame->tf_eip = addr;
        return (0);
}

int
ptrace_single_step(struct thread *td)
{

        PROC_LOCK_ASSERT(td->td_proc, MA_OWNED);
        if ((td->td_frame->tf_eflags & PSL_T) == 0) {
                td->td_frame->tf_eflags |= PSL_T;
                td->td_dbgflags |= TDB_STEP;
        }
        return (0);
}

int
ptrace_clear_single_step(struct thread *td)
{
        PROC_LOCK_ASSERT(td->td_proc, MA_OWNED);
        td->td_frame->tf_eflags &= ~PSL_T;
        td->td_dbgflags &= ~TDB_STEP;
        return (0);
}

int
fill_regs(struct thread *td, struct reg *regs)
{
        struct pcb *pcb;
        struct trapframe *tp;

        tp = td->td_frame;
        pcb = td->td_pcb;
        regs->r_gs = pcb->pcb_gs;
        return (fill_frame_regs(tp, regs));
}

int
fill_frame_regs(struct trapframe *tp, struct reg *regs)
{

        regs->r_fs = tp->tf_fs;
        regs->r_es = tp->tf_es;
        regs->r_ds = tp->tf_ds;
        regs->r_edi = tp->tf_edi;
        regs->r_esi = tp->tf_esi;
        regs->r_ebp = tp->tf_ebp;
        regs->r_ebx = tp->tf_ebx;
        regs->r_edx = tp->tf_edx;
        regs->r_ecx = tp->tf_ecx;
        regs->r_eax = tp->tf_eax;
        regs->r_eip = tp->tf_eip;
        regs->r_cs = tp->tf_cs;
        regs->r_eflags = tp->tf_eflags;
        regs->r_esp = tp->tf_esp;
        regs->r_ss = tp->tf_ss;
        regs->r_err = 0;
        regs->r_trapno = 0;
        return (0);
}

int
set_regs(struct thread *td, struct reg *regs)
{
        struct pcb *pcb;
        struct trapframe *tp;

        tp = td->td_frame;
        if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) ||
            !CS_SECURE(regs->r_cs))
                return (EINVAL);
        pcb = td->td_pcb;
        tp->tf_fs = regs->r_fs;
        tp->tf_es = regs->r_es;
        tp->tf_ds = regs->r_ds;
        tp->tf_edi = regs->r_edi;
        tp->tf_esi = regs->r_esi;
        tp->tf_ebp = regs->r_ebp;
        tp->tf_ebx = regs->r_ebx;
        tp->tf_edx = regs->r_edx;
        tp->tf_ecx = regs->r_ecx;
        tp->tf_eax = regs->r_eax;
        tp->tf_eip = regs->r_eip;
        tp->tf_cs = regs->r_cs;
        tp->tf_eflags = regs->r_eflags;
        tp->tf_esp = regs->r_esp;
        tp->tf_ss = regs->r_ss;
        pcb->pcb_gs = regs->r_gs;
        return (0);
}

int
fill_fpregs(struct thread *td, struct fpreg *fpregs)
{

        KASSERT(td == curthread || TD_IS_SUSPENDED(td) ||
            P_SHOULDSTOP(td->td_proc),
            ("not suspended thread %p", td));
        npxgetregs(td);
        if (cpu_fxsr)
                npx_fill_fpregs_xmm(&get_pcb_user_save_td(td)->sv_xmm,
                    (struct save87 *)fpregs);
        else
                bcopy(&get_pcb_user_save_td(td)->sv_87, fpregs,
                    sizeof(*fpregs));
        return (0);
}

int
set_fpregs(struct thread *td, struct fpreg *fpregs)
{

        critical_enter();
        if (cpu_fxsr)
                npx_set_fpregs_xmm((struct save87 *)fpregs,
                    &get_pcb_user_save_td(td)->sv_xmm);
        else
                bcopy(fpregs, &get_pcb_user_save_td(td)->sv_87,
                    sizeof(*fpregs));
        npxuserinited(td);
        critical_exit();
        return (0);
}

/*
 * Get machine context.
 */
int
get_mcontext(struct thread *td, mcontext_t *mcp, int flags)
{
        struct trapframe *tp;
        struct segment_descriptor *sdp;

        tp = td->td_frame;

        PROC_LOCK(curthread->td_proc);
        mcp->mc_onstack = sigonstack(tp->tf_esp);
        PROC_UNLOCK(curthread->td_proc);
        mcp->mc_gs = td->td_pcb->pcb_gs;
        mcp->mc_fs = tp->tf_fs;
        mcp->mc_es = tp->tf_es;
        mcp->mc_ds = tp->tf_ds;
        mcp->mc_edi = tp->tf_edi;
        mcp->mc_esi = tp->tf_esi;
        mcp->mc_ebp = tp->tf_ebp;
        mcp->mc_isp = tp->tf_isp;
        mcp->mc_eflags = tp->tf_eflags;
        if (flags & GET_MC_CLEAR_RET) {
                mcp->mc_eax = 0;
                mcp->mc_edx = 0;
                mcp->mc_eflags &= ~PSL_C;
        } else {
                mcp->mc_eax = tp->tf_eax;
                mcp->mc_edx = tp->tf_edx;
        }
        mcp->mc_ebx = tp->tf_ebx;
        mcp->mc_ecx = tp->tf_ecx;
        mcp->mc_eip = tp->tf_eip;
        mcp->mc_cs = tp->tf_cs;
        mcp->mc_esp = tp->tf_esp;
        mcp->mc_ss = tp->tf_ss;
        mcp->mc_len = sizeof(*mcp);
        get_fpcontext(td, mcp, NULL, 0);
        sdp = &td->td_pcb->pcb_fsd;
        mcp->mc_fsbase = sdp->sd_hibase << 24 | sdp->sd_lobase;
        sdp = &td->td_pcb->pcb_gsd;
        mcp->mc_gsbase = sdp->sd_hibase << 24 | sdp->sd_lobase;
        mcp->mc_flags = 0;
        mcp->mc_xfpustate = 0;
        mcp->mc_xfpustate_len = 0;
        bzero(mcp->mc_spare2, sizeof(mcp->mc_spare2));
        return (0);
}

/*
 * Set machine context.
 *
 * However, we don't set any but the user modifiable flags, and we won't
 * touch the cs selector.
 */
int
set_mcontext(struct thread *td, mcontext_t *mcp)
{
        struct trapframe *tp;
        char *xfpustate;
        int eflags, ret;

        tp = td->td_frame;
        if (mcp->mc_len != sizeof(*mcp) ||
            (mcp->mc_flags & ~_MC_FLAG_MASK) != 0)
                return (EINVAL);
        eflags = (mcp->mc_eflags & PSL_USERCHANGE) |
            (tp->tf_eflags & ~PSL_USERCHANGE);
        if (mcp->mc_flags & _MC_HASFPXSTATE) {
                if (mcp->mc_xfpustate_len > cpu_max_ext_state_size -
                    sizeof(union savefpu))
                        return (EINVAL);
                xfpustate = __builtin_alloca(mcp->mc_xfpustate_len);
                ret = copyin((void *)mcp->mc_xfpustate, xfpustate,
                    mcp->mc_xfpustate_len);
                if (ret != 0)
                        return (ret);
        } else
                xfpustate = NULL;
        ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len);
        if (ret != 0)
                return (ret);
        tp->tf_fs = mcp->mc_fs;
        tp->tf_es = mcp->mc_es;
        tp->tf_ds = mcp->mc_ds;
        tp->tf_edi = mcp->mc_edi;
        tp->tf_esi = mcp->mc_esi;
        tp->tf_ebp = mcp->mc_ebp;
        tp->tf_ebx = mcp->mc_ebx;
        tp->tf_edx = mcp->mc_edx;
        tp->tf_ecx = mcp->mc_ecx;
        tp->tf_eax = mcp->mc_eax;
        tp->tf_eip = mcp->mc_eip;
        tp->tf_eflags = eflags;
        tp->tf_esp = mcp->mc_esp;
        tp->tf_ss = mcp->mc_ss;
        td->td_pcb->pcb_gs = mcp->mc_gs;
        return (0);
}

static void
get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave,
    size_t xfpusave_len)
{
        size_t max_len, len;

        mcp->mc_ownedfp = npxgetregs(td);
        bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0],
            sizeof(mcp->mc_fpstate));
        mcp->mc_fpformat = npxformat();
        if (!use_xsave || xfpusave_len == 0)
                return;
        max_len = cpu_max_ext_state_size - sizeof(union savefpu);
        len = xfpusave_len;
        if (len > max_len) {
                len = max_len;
                bzero(xfpusave + max_len, len - max_len);
        }
        mcp->mc_flags |= _MC_HASFPXSTATE;
        mcp->mc_xfpustate_len = len;
        bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len);
}

static int
set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate,
    size_t xfpustate_len)
{
        int error;

        if (mcp->mc_fpformat == _MC_FPFMT_NODEV)
                return (0);
        else if (mcp->mc_fpformat != _MC_FPFMT_387 &&
            mcp->mc_fpformat != _MC_FPFMT_XMM)
                return (EINVAL);
        else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) {
                /* We don't care what state is left in the FPU or PCB. */
                fpstate_drop(td);
                error = 0;
        } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU ||
            mcp->mc_ownedfp == _MC_FPOWNED_PCB) {
                error = npxsetregs(td, (union savefpu *)&mcp->mc_fpstate,
                    xfpustate, xfpustate_len);
        } else
                return (EINVAL);
        return (error);
}

static void
fpstate_drop(struct thread *td)
{

        KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu"));
        critical_enter();
        if (PCPU_GET(fpcurthread) == td)
                npxdrop();
        /*
         * XXX force a full drop of the npx.  The above only drops it if we
         * owned it.  npxgetregs() has the same bug in the !cpu_fxsr case.
         *
         * XXX I don't much like npxgetregs()'s semantics of doing a full
         * drop.  Dropping only to the pcb matches fnsave's behaviour.
         * We only need to drop to !PCB_INITDONE in sendsig().  But
         * sendsig() is the only caller of npxgetregs()... perhaps we just
         * have too many layers.
         */
        curthread->td_pcb->pcb_flags &= ~(PCB_NPXINITDONE |
            PCB_NPXUSERINITDONE);
        critical_exit();
}

int
fill_dbregs(struct thread *td, struct dbreg *dbregs)
{
        struct pcb *pcb;

        if (td == NULL) {
                dbregs->dr[0] = rdr0();
                dbregs->dr[1] = rdr1();
                dbregs->dr[2] = rdr2();
                dbregs->dr[3] = rdr3();
                dbregs->dr[4] = rdr4();
                dbregs->dr[5] = rdr5();
                dbregs->dr[6] = rdr6();
                dbregs->dr[7] = rdr7();
        } else {
                pcb = td->td_pcb;
                dbregs->dr[0] = pcb->pcb_dr0;
                dbregs->dr[1] = pcb->pcb_dr1;
                dbregs->dr[2] = pcb->pcb_dr2;
                dbregs->dr[3] = pcb->pcb_dr3;
                dbregs->dr[4] = 0;
                dbregs->dr[5] = 0;
                dbregs->dr[6] = pcb->pcb_dr6;
                dbregs->dr[7] = pcb->pcb_dr7;
        }
        return (0);
}

int
set_dbregs(struct thread *td, struct dbreg *dbregs)
{
        struct pcb *pcb;
        int i;

        if (td == NULL) {
                load_dr0(dbregs->dr[0]);
                load_dr1(dbregs->dr[1]);
                load_dr2(dbregs->dr[2]);
                load_dr3(dbregs->dr[3]);
                load_dr4(dbregs->dr[4]);
                load_dr5(dbregs->dr[5]);
                load_dr6(dbregs->dr[6]);
                load_dr7(dbregs->dr[7]);
        } else {
                /*
                 * Don't let an illegal value for dr7 get set.  Specifically,
                 * check for undefined settings.  Setting these bit patterns
                 * result in undefined behaviour and can lead to an unexpected
                 * TRCTRAP.
                 */
                for (i = 0; i < 4; i++) {
                        if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02)
                                return (EINVAL);
                        if (DBREG_DR7_LEN(dbregs->dr[7], i) == 0x02)
                                return (EINVAL);
                }
                
                pcb = td->td_pcb;
                
                /*
                 * Don't let a process set a breakpoint that is not within the
                 * process's address space.  If a process could do this, it
                 * could halt the system by setting a breakpoint in the kernel
                 * (if ddb was enabled).  Thus, we need to check to make sure
                 * that no breakpoints are being enabled for addresses outside
                 * process's address space.
                 *
                 * XXX - what about when the watched area of the user's
                 * address space is written into from within the kernel
                 * ... wouldn't that still cause a breakpoint to be generated
                 * from within kernel mode?
                 */

                if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) {
                        /* dr0 is enabled */
                        if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS)
                                return (EINVAL);
                }
                        
                if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) {
                        /* dr1 is enabled */
                        if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS)
                                return (EINVAL);
                }
                        
                if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) {
                        /* dr2 is enabled */
                        if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS)
                                return (EINVAL);
                }
                        
                if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) {
                        /* dr3 is enabled */
                        if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS)
                                return (EINVAL);
                }

                pcb->pcb_dr0 = dbregs->dr[0];
                pcb->pcb_dr1 = dbregs->dr[1];
                pcb->pcb_dr2 = dbregs->dr[2];
                pcb->pcb_dr3 = dbregs->dr[3];
                pcb->pcb_dr6 = dbregs->dr[6];
                pcb->pcb_dr7 = dbregs->dr[7];

                pcb->pcb_flags |= PCB_DBREGS;
        }

        return (0);
}

/*
 * Return > 0 if a hardware breakpoint has been hit, and the
 * breakpoint was in user space.  Return 0, otherwise.
 */
int
user_dbreg_trap(register_t dr6)
{
        u_int32_t dr7;
        u_int32_t bp;       /* breakpoint bits extracted from dr6 */
        int nbp;            /* number of breakpoints that triggered */
        caddr_t addr[4];    /* breakpoint addresses */
        int i;

        bp = dr6 & DBREG_DR6_BMASK;
        if (bp == 0) {
                /*
                 * None of the breakpoint bits are set meaning this
                 * trap was not caused by any of the debug registers
                 */
                return 0;
        }

        dr7 = rdr7();
        if ((dr7 & 0x000000ff) == 0) {
                /*
                 * all GE and LE bits in the dr7 register are zero,
                 * thus the trap couldn't have been caused by the
                 * hardware debug registers
                 */
                return 0;
        }

        nbp = 0;

        /*
         * at least one of the breakpoints were hit, check to see
         * which ones and if any of them are user space addresses
         */

        if (bp & 0x01) {
                addr[nbp++] = (caddr_t)rdr0();
        }
        if (bp & 0x02) {
                addr[nbp++] = (caddr_t)rdr1();
        }
        if (bp & 0x04) {
                addr[nbp++] = (caddr_t)rdr2();
        }
        if (bp & 0x08) {
                addr[nbp++] = (caddr_t)rdr3();
        }

        for (i = 0; i < nbp; i++) {
                if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) {
                        /*
                         * addr[i] is in user space
                         */
                        return nbp;
                }
        }

        /*
         * None of the breakpoints are in user space.
         */
        return 0;
}

#ifdef KDB

/*
 * Provide inb() and outb() as functions.  They are normally only available as
 * inline functions, thus cannot be called from the debugger.
 */

/* silence compiler warnings */
u_char inb_(u_short);
void outb_(u_short, u_char);

u_char
inb_(u_short port)
{
        return inb(port);
}

void
outb_(u_short port, u_char data)
{
        outb(port, data);
}

#endif /* KDB */