2 * Copyright (c) 1990 William Jolitz.
3 * Copyright (c) 1991 The Regents of the University of California.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by the University of
17 * California, Berkeley and its contributors.
18 * 4. Neither the name of the University nor the names of its contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91
38 #include "opt_debug_npx.h"
39 #include "opt_math_emulate.h"
41 #include <sys/param.h>
42 #include <sys/systm.h>
44 #include <sys/kernel.h>
46 #include <sys/malloc.h>
47 #include <sys/module.h>
48 #include <sys/mutex.h>
49 #include <sys/mutex.h>
51 #include <sys/sysctl.h>
52 #include <machine/bus.h>
55 #include <sys/syslog.h>
57 #include <sys/signalvar.h>
61 #include <machine/asmacros.h>
63 #include <machine/cputypes.h>
64 #include <machine/frame.h>
65 #include <machine/md_var.h>
66 #include <machine/pcb.h>
67 #include <machine/psl.h>
69 #include <machine/clock.h>
71 #include <machine/resource.h>
72 #include <machine/specialreg.h>
73 #include <machine/segments.h>
76 #include <i386/isa/icu.h>
77 #include <i386/isa/intr_machdep.h>
78 #include <i386/isa/isa.h>
80 #include <isa/isavar.h>
83 * 387 and 287 Numeric Coprocessor Extension (NPX) Driver.
86 /* Configuration flags. */
87 #define NPX_DISABLE_I586_OPTIMIZED_BCOPY (1 << 0)
88 #define NPX_DISABLE_I586_OPTIMIZED_BZERO (1 << 1)
89 #define NPX_DISABLE_I586_OPTIMIZED_COPYIO (1 << 2)
90 #define NPX_PREFER_EMULATOR (1 << 3)
94 #define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr)))
95 #define fnclex() __asm("fnclex")
96 #define fninit() __asm("fninit")
97 #define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr)))
98 #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr)))
99 #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr)))
100 #define fp_divide_by_0() __asm("fldz; fld1; fdiv %st,%st(1); fnop")
101 #define frstor(addr) __asm("frstor %0" : : "m" (*(addr)))
102 #define start_emulating() __asm("smsw %%ax; orb %0,%%al; lmsw %%ax" \
103 : : "n" (CR0_TS) : "ax")
104 #define stop_emulating() __asm("clts")
106 #else /* not __GNUC__ */
108 void fldcw __P((caddr_t addr));
109 void fnclex __P((void));
110 void fninit __P((void));
111 void fnsave __P((caddr_t addr));
112 void fnstcw __P((caddr_t addr));
113 void fnstsw __P((caddr_t addr));
114 void fp_divide_by_0 __P((void));
115 void frstor __P((caddr_t addr));
116 void start_emulating __P((void));
117 void stop_emulating __P((void));
119 #endif /* __GNUC__ */
121 typedef u_char bool_t;
123 static int npx_attach __P((device_t dev));
124 static void npx_identify __P((driver_t *driver, device_t parent));
126 static void npx_intr __P((void *));
128 static int npx_probe __P((device_t dev));
129 static int npx_probe1 __P((device_t dev));
131 static long timezero __P((const char *funcname,
132 void (*func)(void *buf, size_t len)));
133 #endif /* I586_CPU */
135 int hw_float; /* XXX currently just alias for npx_exists */
137 SYSCTL_INT(_hw,HW_FLOATINGPT, floatingpoint,
138 CTLFLAG_RD, &hw_float, 0,
139 "Floatingpoint instructions executed in hardware");
142 static volatile u_int npx_intrs_while_probing;
143 static volatile u_int npx_traps_while_probing;
146 static bool_t npx_ex16;
147 static bool_t npx_exists;
148 static bool_t npx_irq13;
149 static int npx_irq; /* irq number */
153 * Special interrupt handlers. Someday intr0-intr15 will be used to count
154 * interrupts. We'll still need a special exception 16 handler. The busy
155 * latch stuff in probeintr() can be moved to npxprobe().
161 .type " __XSTRING(CNAME(probeintr)) ",@function \n\
162 " __XSTRING(CNAME(probeintr)) ": \n\
164 incl " __XSTRING(CNAME(npx_intrs_while_probing)) " \n\
166 movb $0x20,%al # EOI (asm in strings loses cpp features) \n\
167 outb %al,$0xa0 # IO_ICU2 \n\
168 outb %al,$0x20 # IO_ICU1 \n\
170 outb %al,$0xf0 # clear BUSY# latch \n\
179 .type " __XSTRING(CNAME(probetrap)) ",@function \n\
180 " __XSTRING(CNAME(probetrap)) ": \n\
182 incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\
189 * Identify routine. Create a connection point on our parent for probing.
192 npx_identify(driver, parent)
198 child = BUS_ADD_CHILD(parent, 0, "npx", 0);
200 panic("npx_identify");
205 * Do minimal handling of npx interrupts to convert them to traps.
214 * The BUSY# latch must be cleared in all cases so that the next
215 * unmasked npx exception causes an interrupt.
220 * npxproc is normally non-null here. In that case, schedule an
221 * AST to finish the exception handling in the correct context
222 * (this interrupt may occur after the process has entered the
223 * kernel via a syscall or an interrupt). Otherwise, the npx
224 * state of the process that caused this interrupt must have been
225 * pushed to the process' pcb, and clearing of the busy latch
226 * above has finished the (essentially null) handling of this
227 * interrupt. Control will eventually return to the instruction
228 * that caused it and it will repeat. We will eventually (usually
229 * soon) win the race to handle the interrupt properly.
231 p = PCPU_GET(npxproc);
233 p->p_addr->u_pcb.pcb_flags |= PCB_NPXTRAP;
234 mtx_lock_spin(&sched_lock);
236 mtx_unlock_spin(&sched_lock);
241 * XXX these "local" variables of npx_probe() are non-local so that
242 * npxprobe1() can abuse them.
244 static int npx_intrno;
245 static struct gate_descriptor save_idt_npxintr;
249 * Probe routine. Initialize cr0 to give correct behaviour for [f]wait
250 * whether the device exists or not (XXX should be elsewhere). Set flags
251 * to tell npxattach() what to do. Modify device struct if npx doesn't
252 * need to use interrupts. Return 1 if device exists.
260 if (resource_int_value("npx", 0, "irq", &npx_irq) != 0)
262 return npx_probe1(dev);
268 u_char save_icu1_mask;
269 u_char save_icu2_mask;
270 struct gate_descriptor save_idt_npxtrap;
272 * This routine is now just a wrapper for npxprobe1(), to install
273 * special npx interrupt and trap handlers, to enable npx interrupts
274 * and to disable other interrupts. Someday isa_configure() will
275 * install suitable handlers and run with interrupts enabled so we
276 * won't need to do so much here.
278 if (resource_int_value("npx", 0, "irq", &npx_irq) != 0)
280 npx_intrno = NRSVIDT + npx_irq;
281 savecrit = critical_enter();
282 save_icu1_mask = inb(IO_ICU1 + 1);
283 save_icu2_mask = inb(IO_ICU2 + 1);
284 save_idt_npxintr = idt[npx_intrno];
285 save_idt_npxtrap = idt[16];
286 outb(IO_ICU1 + 1, ~IRQ_SLAVE);
287 outb(IO_ICU2 + 1, ~(1 << (npx_irq - 8)));
288 setidt(16, probetrap, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
289 setidt(npx_intrno, probeintr, SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
292 * XXX This looks highly bogus, but it appears that npc_probe1
293 * needs interrupts enabled. Does this make any difference
296 critical_exit(savecrit);
297 result = npx_probe1(dev);
298 savecrit = critical_enter();
299 outb(IO_ICU1 + 1, save_icu1_mask);
300 outb(IO_ICU2 + 1, save_icu2_mask);
301 idt[npx_intrno] = save_idt_npxintr;
302 idt[16] = save_idt_npxtrap;
303 critical_exit(savecrit);
319 * Partially reset the coprocessor, if any. Some BIOS's don't reset
320 * it after a warm boot.
322 outb(0xf1, 0); /* full reset on some systems, NOP on others */
323 outb(0xf0, 0); /* clear BUSY# latch */
325 * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT
326 * instructions. We must set the CR0_MP bit and use the CR0_TS
327 * bit to control the trap, because setting the CR0_EM bit does
328 * not cause WAIT instructions to trap. It's important to trap
329 * WAIT instructions - otherwise the "wait" variants of no-wait
330 * control instructions would degenerate to the "no-wait" variants
331 * after FP context switches but work correctly otherwise. It's
332 * particularly important to trap WAITs when there is no NPX -
333 * otherwise the "wait" variants would always degenerate.
335 * Try setting CR0_NE to get correct error reporting on 486DX's.
336 * Setting it should fail or do nothing on lesser processors.
338 load_cr0(rcr0() | CR0_MP | CR0_NE);
340 * But don't trap while we're probing.
344 * Finish resetting the coprocessor, if any. If there is an error
345 * pending, then we may get a bogus IRQ13, but probeintr() will handle
346 * it OK. Bogus halts have never been observed, but we enabled
347 * IRQ13 and cleared the BUSY# latch early to handle them anyway.
353 * Exception 16 MUST work for SMP.
356 npx_ex16 = hw_float = npx_exists = 1;
357 device_set_desc(dev, "math processor");
361 device_set_desc(dev, "math processor");
364 * Don't use fwait here because it might hang.
365 * Don't use fnop here because it usually hangs if there is no FPU.
367 DELAY(1000); /* wait for any IRQ13 */
369 if (npx_intrs_while_probing != 0)
370 printf("fninit caused %u bogus npx interrupt(s)\n",
371 npx_intrs_while_probing);
372 if (npx_traps_while_probing != 0)
373 printf("fninit caused %u bogus npx trap(s)\n",
374 npx_traps_while_probing);
377 * Check for a status of mostly zero.
381 if ((status & 0xb8ff) == 0) {
383 * Good, now check for a proper control word.
387 if ((control & 0x1f3f) == 0x033f) {
388 hw_float = npx_exists = 1;
390 * We have an npx, now divide by 0 to see if exception
393 control &= ~(1 << 2); /* enable divide by 0 trap */
395 npx_traps_while_probing = npx_intrs_while_probing = 0;
397 if (npx_traps_while_probing != 0) {
399 * Good, exception 16 works.
404 if (npx_intrs_while_probing != 0) {
409 * Bad, we are stuck with IRQ13.
414 * We allocate these resources permanently,
415 * so there is no need to keep track of them.
418 r = bus_alloc_resource(dev, SYS_RES_IOPORT,
419 &rid, IO_NPX, IO_NPX,
420 IO_NPXSIZE, RF_ACTIVE);
422 panic("npx: can't get ports");
424 r = bus_alloc_resource(dev, SYS_RES_IRQ,
425 &rid, npx_irq, npx_irq,
428 panic("npx: can't get IRQ");
429 BUS_SETUP_INTR(device_get_parent(dev),
431 INTR_TYPE_MISC | INTR_FAST,
434 panic("npx: can't create intr");
437 * XXX BUS_SETUP_INTR() has changed
438 * idt[npx_intrno] to point to Xfastintr0
439 * instead of Xfastintr0. Adjust
440 * save_idt_npxintr so that npxprobe()
443 save_idt_npxintr = idt[npx_intrno];
448 * Worse, even IRQ13 is broken. Use emulator.
453 * Probe failed, but we want to get to npxattach to initialize the
454 * emulator and say that it has been installed. XXX handle devices
455 * that aren't really devices better.
462 * Attach routine - announce which it is, and wire into system
470 if (resource_int_value("npx", 0, "flags", &flags) != 0)
474 device_printf(dev, "flags 0x%x ", flags);
476 device_printf(dev, "using IRQ 13 interface\n");
478 #if defined(MATH_EMULATE) || defined(GPL_MATH_EMULATE)
480 if (!(flags & NPX_PREFER_EMULATOR))
481 device_printf(dev, "INT 16 interface\n");
483 device_printf(dev, "FPU exists, but flags request "
485 hw_float = npx_exists = 0;
487 } else if (npx_exists) {
488 device_printf(dev, "error reporting broken; using 387 emulator\n");
489 hw_float = npx_exists = 0;
491 device_printf(dev, "387 emulator\n");
494 device_printf(dev, "INT 16 interface\n");
495 if (flags & NPX_PREFER_EMULATOR) {
496 device_printf(dev, "emulator requested, but none compiled "
497 "into kernel, using FPU\n");
500 device_printf(dev, "no 387 emulator in kernel and no FPU!\n");
503 npxinit(__INITIAL_NPXCW__);
506 if (cpu_class == CPUCLASS_586 && npx_ex16 && npx_exists &&
507 timezero("i586_bzero()", i586_bzero) <
508 timezero("bzero()", bzero) * 4 / 5) {
509 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BCOPY)) {
510 bcopy_vector = i586_bcopy;
511 ovbcopy_vector = i586_bcopy;
513 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BZERO))
515 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_COPYIO)) {
516 copyin_vector = i586_copyin;
517 copyout_vector = i586_copyout;
522 return (0); /* XXX unused */
526 * Initialize floating point unit.
538 * fninit has the same h/w bugs as fnsave. Use the detoxified
539 * fnsave to throw away any junk in the fpu. npxsave() initializes
540 * the fpu and sets npxproc = NULL as important side effects.
542 savecrit = critical_enter();
546 if (PCPU_GET(curpcb) != NULL)
547 fnsave(&PCPU_GET(curpcb)->pcb_savefpu);
549 critical_exit(savecrit);
553 * Free coprocessor (if we have it).
561 savecrit = critical_enter();
562 if (p == PCPU_GET(npxproc))
563 npxsave(&PCPU_GET(curpcb)->pcb_savefpu);
564 critical_exit(savecrit);
567 u_int masked_exceptions;
569 masked_exceptions = PCPU_GET(curpcb)->pcb_savefpu.sv_env.en_cw
570 & PCPU_GET(curpcb)->pcb_savefpu.sv_env.en_sw & 0x7f;
572 * Log exceptions that would have trapped with the old
573 * control word (overflow, divide by 0, and invalid operand).
575 if (masked_exceptions & 0x0d)
577 "pid %d (%s) exited with masked floating point exceptions 0x%02x\n",
578 p->p_pid, p->p_comm, masked_exceptions);
584 * The following mechanism is used to ensure that the FPE_... value
585 * that is passed as a trapcode to the signal handler of the user
586 * process does not have more than one bit set.
588 * Multiple bits may be set if the user process modifies the control
589 * word while a status word bit is already set. While this is a sign
590 * of bad coding, we have no choise than to narrow them down to one
591 * bit, since we must not send a trapcode that is not exactly one of
594 * The mechanism has a static table with 127 entries. Each combination
595 * of the 7 FPU status word exception bits directly translates to a
596 * position in this table, where a single FPE_... value is stored.
597 * This FPE_... value stored there is considered the "most important"
598 * of the exception bits and will be sent as the signal code. The
599 * precedence of the bits is based upon Intel Document "Numerical
600 * Applications", Chapter "Special Computational Situations".
602 * The macro to choose one of these values does these steps: 1) Throw
603 * away status word bits that cannot be masked. 2) Throw away the bits
604 * currently masked in the control word, assuming the user isn't
605 * interested in them anymore. 3) Reinsert status word bit 7 (stack
606 * fault) if it is set, which cannot be masked but must be presered.
607 * 4) Use the remaining bits to point into the trapcode table.
609 * The 6 maskable bits in order of their preference, as stated in the
610 * above referenced Intel manual:
611 * 1 Invalid operation (FP_X_INV)
614 * 1c Operand of unsupported format
616 * 2 QNaN operand (not an exception, irrelavant here)
617 * 3 Any other invalid-operation not mentioned above or zero divide
618 * (FP_X_INV, FP_X_DZ)
619 * 4 Denormal operand (FP_X_DNML)
620 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL)
621 * 6 Inexact result (FP_X_IMP)
623 static char fpetable[128] = {
625 FPE_FLTINV, /* 1 - INV */
626 FPE_FLTUND, /* 2 - DNML */
627 FPE_FLTINV, /* 3 - INV | DNML */
628 FPE_FLTDIV, /* 4 - DZ */
629 FPE_FLTINV, /* 5 - INV | DZ */
630 FPE_FLTDIV, /* 6 - DNML | DZ */
631 FPE_FLTINV, /* 7 - INV | DNML | DZ */
632 FPE_FLTOVF, /* 8 - OFL */
633 FPE_FLTINV, /* 9 - INV | OFL */
634 FPE_FLTUND, /* A - DNML | OFL */
635 FPE_FLTINV, /* B - INV | DNML | OFL */
636 FPE_FLTDIV, /* C - DZ | OFL */
637 FPE_FLTINV, /* D - INV | DZ | OFL */
638 FPE_FLTDIV, /* E - DNML | DZ | OFL */
639 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */
640 FPE_FLTUND, /* 10 - UFL */
641 FPE_FLTINV, /* 11 - INV | UFL */
642 FPE_FLTUND, /* 12 - DNML | UFL */
643 FPE_FLTINV, /* 13 - INV | DNML | UFL */
644 FPE_FLTDIV, /* 14 - DZ | UFL */
645 FPE_FLTINV, /* 15 - INV | DZ | UFL */
646 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */
647 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */
648 FPE_FLTOVF, /* 18 - OFL | UFL */
649 FPE_FLTINV, /* 19 - INV | OFL | UFL */
650 FPE_FLTUND, /* 1A - DNML | OFL | UFL */
651 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */
652 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */
653 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */
654 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */
655 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */
656 FPE_FLTRES, /* 20 - IMP */
657 FPE_FLTINV, /* 21 - INV | IMP */
658 FPE_FLTUND, /* 22 - DNML | IMP */
659 FPE_FLTINV, /* 23 - INV | DNML | IMP */
660 FPE_FLTDIV, /* 24 - DZ | IMP */
661 FPE_FLTINV, /* 25 - INV | DZ | IMP */
662 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */
663 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */
664 FPE_FLTOVF, /* 28 - OFL | IMP */
665 FPE_FLTINV, /* 29 - INV | OFL | IMP */
666 FPE_FLTUND, /* 2A - DNML | OFL | IMP */
667 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */
668 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */
669 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */
670 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */
671 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */
672 FPE_FLTUND, /* 30 - UFL | IMP */
673 FPE_FLTINV, /* 31 - INV | UFL | IMP */
674 FPE_FLTUND, /* 32 - DNML | UFL | IMP */
675 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */
676 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */
677 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */
678 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */
679 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */
680 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */
681 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */
682 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */
683 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */
684 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */
685 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */
686 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */
687 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */
688 FPE_FLTSUB, /* 40 - STK */
689 FPE_FLTSUB, /* 41 - INV | STK */
690 FPE_FLTUND, /* 42 - DNML | STK */
691 FPE_FLTSUB, /* 43 - INV | DNML | STK */
692 FPE_FLTDIV, /* 44 - DZ | STK */
693 FPE_FLTSUB, /* 45 - INV | DZ | STK */
694 FPE_FLTDIV, /* 46 - DNML | DZ | STK */
695 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */
696 FPE_FLTOVF, /* 48 - OFL | STK */
697 FPE_FLTSUB, /* 49 - INV | OFL | STK */
698 FPE_FLTUND, /* 4A - DNML | OFL | STK */
699 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */
700 FPE_FLTDIV, /* 4C - DZ | OFL | STK */
701 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */
702 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */
703 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */
704 FPE_FLTUND, /* 50 - UFL | STK */
705 FPE_FLTSUB, /* 51 - INV | UFL | STK */
706 FPE_FLTUND, /* 52 - DNML | UFL | STK */
707 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */
708 FPE_FLTDIV, /* 54 - DZ | UFL | STK */
709 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */
710 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */
711 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */
712 FPE_FLTOVF, /* 58 - OFL | UFL | STK */
713 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */
714 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */
715 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */
716 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */
717 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */
718 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */
719 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */
720 FPE_FLTRES, /* 60 - IMP | STK */
721 FPE_FLTSUB, /* 61 - INV | IMP | STK */
722 FPE_FLTUND, /* 62 - DNML | IMP | STK */
723 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */
724 FPE_FLTDIV, /* 64 - DZ | IMP | STK */
725 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */
726 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */
727 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */
728 FPE_FLTOVF, /* 68 - OFL | IMP | STK */
729 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */
730 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */
731 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */
732 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */
733 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */
734 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */
735 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */
736 FPE_FLTUND, /* 70 - UFL | IMP | STK */
737 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */
738 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */
739 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */
740 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */
741 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */
742 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */
743 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */
744 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */
745 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */
746 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */
747 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */
748 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */
749 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */
750 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */
751 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */
755 * Preserve the FP status word, clear FP exceptions, then generate a SIGFPE.
757 * Clearing exceptions is necessary mainly to avoid IRQ13 bugs. We now
758 * depend on longjmp() restoring a usable state. Restoring the state
759 * or examining it might fail if we didn't clear exceptions.
761 * The error code chosen will be one of the FPE_... macros. It will be
762 * sent as the second argument to old BSD-style signal handlers and as
763 * "siginfo_t->si_code" (second argument) to SA_SIGINFO signal handlers.
765 * XXX the FP state is not preserved across signal handlers. So signal
766 * handlers cannot afford to do FP unless they preserve the state or
767 * longjmp() out. Both preserving the state and longjmp()ing may be
768 * destroyed by IRQ13 bugs. Clearing FP exceptions is not an acceptable
769 * solution for signals other than SIGFPE.
775 u_short control, status;
778 printf("npxtrap: npxproc = %p, curproc = %p, npx_exists = %d\n",
779 PCPU_GET(npxproc), curproc, npx_exists);
780 panic("npxtrap from nowhere");
782 savecrit = critical_enter();
785 * Interrupt handling (for another interrupt) may have pushed the
786 * state to memory. Fetch the relevant parts of the state from
789 if (PCPU_GET(npxproc) != curproc) {
790 control = curproc->p_addr->u_pcb.pcb_savefpu.sv_env.en_cw;
791 status = curproc->p_addr->u_pcb.pcb_savefpu.sv_env.en_sw;
797 curproc->p_addr->u_pcb.pcb_savefpu.sv_ex_sw = status;
798 if (PCPU_GET(npxproc) != curproc)
799 curproc->p_addr->u_pcb.pcb_savefpu.sv_env.en_sw &= ~0x80bf;
802 critical_exit(savecrit);
803 return (fpetable[status & ((~control & 0x3f) | 0x40)]);
807 * Implement device not available (DNA) exception
809 * It would be better to switch FP context here (if curproc != npxproc)
810 * and not necessarily for every context switch, but it is too hard to
811 * access foreign pcb's.
820 if (PCPU_GET(npxproc) != NULL) {
821 printf("npxdna: npxproc = %p, curproc = %p\n",
822 PCPU_GET(npxproc), curproc);
825 s = critical_enter();
828 * Record new context early in case frstor causes an IRQ13.
830 PCPU_SET(npxproc, CURPROC);
831 PCPU_GET(curpcb)->pcb_savefpu.sv_ex_sw = 0;
833 * The following frstor may cause an IRQ13 when the state being
834 * restored has a pending error. The error will appear to have been
835 * triggered by the current (npx) user instruction even when that
836 * instruction is a no-wait instruction that should not trigger an
837 * error (e.g., fnclex). On at least one 486 system all of the
838 * no-wait instructions are broken the same as frstor, so our
839 * treatment does not amplify the breakage. On at least one
840 * 386/Cyrix 387 system, fnclex works correctly while frstor and
841 * fnsave are broken, so our treatment breaks fnclex if it is the
842 * first FPU instruction after a context switch.
844 frstor(&PCPU_GET(curpcb)->pcb_savefpu);
851 * Wrapper for fnsave instruction, partly to handle hardware bugs. When npx
852 * exceptions are reported via IRQ13, spurious IRQ13's may be triggered by
853 * no-wait npx instructions. See the Intel application note AP-578 for
854 * details. This doesn't cause any additional complications here. IRQ13's
855 * are inherently asynchronous unless the CPU is frozen to deliver them --
856 * one that started in userland may be delivered many instructions later,
857 * after the process has entered the kernel. It may even be delivered after
858 * the fnsave here completes. A spurious IRQ13 for the fnsave is handled in
859 * the same way as a very-late-arriving non-spurious IRQ13 from user mode:
860 * it is normally ignored at first because we set npxproc to NULL; it is
861 * normally retriggered in npxdna() after return to user mode.
863 * npxsave() must be called with interrupts disabled, so that it clears
864 * npxproc atomically with saving the state. We require callers to do the
865 * disabling, since most callers need to disable interrupts anyway to call
866 * npxsave() atomically with checking npxproc.
868 * A previous version of npxsave() went to great lengths to excecute fnsave
869 * with interrupts enabled in case executing it froze the CPU. This case
870 * can't happen, at least for Intel CPU/NPX's. Spurious IRQ13's don't imply
881 PCPU_SET(npxproc, NULL);
886 timezero(funcname, func)
887 const char *funcname;
888 void (*func) __P((void *buf, size_t len));
892 #define BUFSIZE 1048576
894 struct timeval finish, start;
896 buf = malloc(BUFSIZE, M_TEMP, M_NOWAIT);
900 (*func)(buf, BUFSIZE);
902 usec = 1000000 * (finish.tv_sec - start.tv_sec) +
903 finish.tv_usec - start.tv_usec;
907 printf("%s bandwidth = %lu kBps\n", funcname,
908 (u_int32_t)(((BUFSIZE >> 10) * 1000000) / usec));
912 #endif /* I586_CPU */
914 static device_method_t npx_methods[] = {
915 /* Device interface */
916 DEVMETHOD(device_identify, npx_identify),
917 DEVMETHOD(device_probe, npx_probe),
918 DEVMETHOD(device_attach, npx_attach),
919 DEVMETHOD(device_detach, bus_generic_detach),
920 DEVMETHOD(device_shutdown, bus_generic_shutdown),
921 DEVMETHOD(device_suspend, bus_generic_suspend),
922 DEVMETHOD(device_resume, bus_generic_resume),
927 static driver_t npx_driver = {
933 static devclass_t npx_devclass;
936 * We prefer to attach to the root nexus so that the usual case (exception 16)
937 * doesn't describe the processor as being `on isa'.
939 DRIVER_MODULE(npx, nexus, npx_driver, npx_devclass, 0, 0);
942 * This sucks up the legacy ISA support assignments from PNPBIOS.
944 static struct isa_pnp_id npxisa_ids[] = {
945 { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */
950 npxisa_probe(device_t dev)
953 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, npxisa_ids)) <= 0) {
960 npxisa_attach(device_t dev)
965 static device_method_t npxisa_methods[] = {
966 /* Device interface */
967 DEVMETHOD(device_probe, npxisa_probe),
968 DEVMETHOD(device_attach, npxisa_attach),
969 DEVMETHOD(device_detach, bus_generic_detach),
970 DEVMETHOD(device_shutdown, bus_generic_shutdown),
971 DEVMETHOD(device_suspend, bus_generic_suspend),
972 DEVMETHOD(device_resume, bus_generic_resume),
977 static driver_t npxisa_driver = {
983 static devclass_t npxisa_devclass;
985 DRIVER_MODULE(npxisa, isa, npxisa_driver, npxisa_devclass, 0, 0);