]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/kern/kern_acct.c
busdma: Add KMSAN integration
[FreeBSD/FreeBSD.git] / sys / kern / kern_acct.c
1 /*-
2  * SPDX-License-Identifier: BSD-4-Clause
3  *
4  * Copyright (c) 1982, 1986, 1989, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  * (c) UNIX System Laboratories, Inc.
7  * Copyright (c) 2005 Robert N. M. Watson
8  * All rights reserved.
9  *
10  * All or some portions of this file are derived from material licensed
11  * to the University of California by American Telephone and Telegraph
12  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
13  * the permission of UNIX System Laboratories, Inc.
14  *
15  * Redistribution and use in source and binary forms, with or without
16  * modification, are permitted provided that the following conditions
17  * are met:
18  * 1. Redistributions of source code must retain the above copyright
19  *    notice, this list of conditions and the following disclaimer.
20  * 2. Redistributions in binary form must reproduce the above copyright
21  *    notice, this list of conditions and the following disclaimer in the
22  *    documentation and/or other materials provided with the distribution.
23  * 3. Neither the name of the University nor the names of its contributors
24  *    may be used to endorse or promote products derived from this software
25  *    without specific prior written permission.
26  *
27  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
28  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
31  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
35  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
36  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37  * SUCH DAMAGE.
38  *
39  * Copyright (c) 1994 Christopher G. Demetriou
40  *
41  * Redistribution and use in source and binary forms, with or without
42  * modification, are permitted provided that the following conditions
43  * are met:
44  * 1. Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  * 2. Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in the
48  *    documentation and/or other materials provided with the distribution.
49  * 3. All advertising materials mentioning features or use of this software
50  *    must display the following acknowledgement:
51  *      This product includes software developed by the University of
52  *      California, Berkeley and its contributors.
53  * 4. Neither the name of the University nor the names of its contributors
54  *    may be used to endorse or promote products derived from this software
55  *    without specific prior written permission.
56  *
57  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
58  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
59  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
60  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
61  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
62  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
63  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
64  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
65  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
66  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
67  * SUCH DAMAGE.
68  *
69  *      @(#)kern_acct.c 8.1 (Berkeley) 6/14/93
70  */
71
72 #include <sys/cdefs.h>
73 __FBSDID("$FreeBSD$");
74
75 #include <sys/param.h>
76 #include <sys/systm.h>
77 #include <sys/acct.h>
78 #include <sys/fcntl.h>
79 #include <sys/kernel.h>
80 #include <sys/kthread.h>
81 #include <sys/limits.h>
82 #include <sys/lock.h>
83 #include <sys/malloc.h>
84 #include <sys/mount.h>
85 #include <sys/mutex.h>
86 #include <sys/namei.h>
87 #include <sys/priv.h>
88 #include <sys/proc.h>
89 #include <sys/resourcevar.h>
90 #include <sys/sched.h>
91 #include <sys/sx.h>
92 #include <sys/sysctl.h>
93 #include <sys/sysent.h>
94 #include <sys/syslog.h>
95 #include <sys/sysproto.h>
96 #include <sys/tty.h>
97 #include <sys/vnode.h>
98
99 #include <security/mac/mac_framework.h>
100
101 _Static_assert(sizeof(struct acctv3) - offsetof(struct acctv3, ac_trailer) ==
102     sizeof(struct acctv2) - offsetof(struct acctv2, ac_trailer), "trailer");
103 _Static_assert(sizeof(struct acctv3) - offsetof(struct acctv3, ac_len2) ==
104     sizeof(struct acctv2) - offsetof(struct acctv2, ac_len2), "len2");
105
106 /*
107  * The routines implemented in this file are described in:
108  *      Leffler, et al.: The Design and Implementation of the 4.3BSD
109  *          UNIX Operating System (Addison Welley, 1989)
110  * on pages 62-63.
111  * On May 2007 the historic 3 bits base 8 exponent, 13 bit fraction
112  * compt_t representation described in the above reference was replaced
113  * with that of IEEE-754 floats.
114  *
115  * Arguably, to simplify accounting operations, this mechanism should
116  * be replaced by one in which an accounting log file (similar to /dev/klog)
117  * is read by a user process, etc.  However, that has its own problems.
118  */
119
120 /* Floating point definitions from <float.h>. */
121 #define FLT_MANT_DIG    24              /* p */
122 #define FLT_MAX_EXP     128             /* emax */
123
124 /*
125  * Internal accounting functions.
126  * The former's operation is described in Leffler, et al., and the latter
127  * was provided by UCB with the 4.4BSD-Lite release
128  */
129 static uint32_t encode_timeval(struct timeval);
130 static uint32_t encode_long(long);
131 static void     acctwatch(void);
132 static void     acct_thread(void *);
133 static int      acct_disable(struct thread *, int);
134
135 /*
136  * Accounting vnode pointer, saved vnode pointer, and flags for each.
137  * acct_sx protects against changes to the active vnode and credentials
138  * while accounting records are being committed to disk.
139  */
140 static int               acct_configured;
141 static int               acct_suspended;
142 static struct vnode     *acct_vp;
143 static struct ucred     *acct_cred;
144 static int               acct_flags;
145 static struct sx         acct_sx;
146
147 SX_SYSINIT(acct, &acct_sx, "acct_sx");
148
149 /*
150  * State of the accounting kthread.
151  */
152 static int               acct_state;
153
154 #define ACCT_RUNNING    1       /* Accounting kthread is running. */
155 #define ACCT_EXITREQ    2       /* Accounting kthread should exit. */
156
157 /*
158  * Values associated with enabling and disabling accounting
159  */
160 static int acctsuspend = 2;     /* stop accounting when < 2% free space left */
161 SYSCTL_INT(_kern, OID_AUTO, acct_suspend, CTLFLAG_RW,
162         &acctsuspend, 0, "percentage of free disk space below which accounting stops");
163
164 static int acctresume = 4;      /* resume when free space risen to > 4% */
165 SYSCTL_INT(_kern, OID_AUTO, acct_resume, CTLFLAG_RW,
166         &acctresume, 0, "percentage of free disk space above which accounting resumes");
167
168 static int acctchkfreq = 15;    /* frequency (in seconds) to check space */
169
170 static int
171 sysctl_acct_chkfreq(SYSCTL_HANDLER_ARGS)
172 {
173         int error, value;
174
175         /* Write out the old value. */
176         error = SYSCTL_OUT(req, &acctchkfreq, sizeof(int));
177         if (error || req->newptr == NULL)
178                 return (error);
179
180         /* Read in and verify the new value. */
181         error = SYSCTL_IN(req, &value, sizeof(int));
182         if (error)
183                 return (error);
184         if (value <= 0)
185                 return (EINVAL);
186         acctchkfreq = value;
187         return (0);
188 }
189 SYSCTL_PROC(_kern, OID_AUTO, acct_chkfreq,
190     CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, &acctchkfreq, 0,
191     sysctl_acct_chkfreq, "I",
192     "frequency for checking the free space");
193
194 SYSCTL_INT(_kern, OID_AUTO, acct_configured, CTLFLAG_RD, &acct_configured, 0,
195         "Accounting configured or not");
196
197 SYSCTL_INT(_kern, OID_AUTO, acct_suspended, CTLFLAG_RD, &acct_suspended, 0,
198         "Accounting suspended or not");
199
200 /*
201  * Accounting system call.  Written based on the specification and previous
202  * implementation done by Mark Tinguely.
203  */
204 int
205 sys_acct(struct thread *td, struct acct_args *uap)
206 {
207         struct nameidata nd;
208         int error, flags, replacing;
209
210         error = priv_check(td, PRIV_ACCT);
211         if (error)
212                 return (error);
213
214         /*
215          * If accounting is to be started to a file, open that file for
216          * appending and make sure it's a 'normal'.
217          */
218         if (uap->path != NULL) {
219                 NDINIT(&nd, LOOKUP, NOFOLLOW | AUDITVNODE1,
220                     UIO_USERSPACE, uap->path, td);
221                 flags = FWRITE | O_APPEND;
222                 error = vn_open(&nd, &flags, 0, NULL);
223                 if (error)
224                         return (error);
225                 NDFREE(&nd, NDF_ONLY_PNBUF);
226 #ifdef MAC
227                 error = mac_system_check_acct(td->td_ucred, nd.ni_vp);
228                 if (error) {
229                         VOP_UNLOCK(nd.ni_vp);
230                         vn_close(nd.ni_vp, flags, td->td_ucred, td);
231                         return (error);
232                 }
233 #endif
234                 VOP_UNLOCK(nd.ni_vp);
235                 if (nd.ni_vp->v_type != VREG) {
236                         vn_close(nd.ni_vp, flags, td->td_ucred, td);
237                         return (EACCES);
238                 }
239 #ifdef MAC
240         } else {
241                 error = mac_system_check_acct(td->td_ucred, NULL);
242                 if (error)
243                         return (error);
244 #endif
245         }
246
247         /*
248          * Disallow concurrent access to the accounting vnode while we swap
249          * it out, in order to prevent access after close.
250          */
251         sx_xlock(&acct_sx);
252
253         /*
254          * Don't log spurious disable/enable messages if we are
255          * switching from one accounting file to another due to log
256          * rotation.
257          */
258         replacing = (acct_vp != NULL && uap->path != NULL);
259
260         /*
261          * If accounting was previously enabled, kill the old space-watcher,
262          * close the file, and (if no new file was specified, leave).  Reset
263          * the suspended state regardless of whether accounting remains
264          * enabled.
265          */
266         acct_suspended = 0;
267         if (acct_vp != NULL)
268                 error = acct_disable(td, !replacing);
269         if (uap->path == NULL) {
270                 if (acct_state & ACCT_RUNNING) {
271                         acct_state |= ACCT_EXITREQ;
272                         wakeup(&acct_state);
273                 }
274                 sx_xunlock(&acct_sx);
275                 return (error);
276         }
277
278         /*
279          * Save the new accounting file vnode, and schedule the new
280          * free space watcher.
281          */
282         acct_vp = nd.ni_vp;
283         acct_cred = crhold(td->td_ucred);
284         acct_flags = flags;
285         if (acct_state & ACCT_RUNNING)
286                 acct_state &= ~ACCT_EXITREQ;
287         else {
288                 /*
289                  * Try to start up an accounting kthread.  We may start more
290                  * than one, but if so the extras will commit suicide as
291                  * soon as they start up.
292                  */
293                 error = kproc_create(acct_thread, NULL, NULL, 0, 0,
294                     "accounting");
295                 if (error) {
296                         (void) acct_disable(td, 0);
297                         sx_xunlock(&acct_sx);
298                         log(LOG_NOTICE, "Unable to start accounting thread\n");
299                         return (error);
300                 }
301         }
302         acct_configured = 1;
303         sx_xunlock(&acct_sx);
304         if (!replacing)
305                 log(LOG_NOTICE, "Accounting enabled\n");
306         return (error);
307 }
308
309 /*
310  * Disable currently in-progress accounting by closing the vnode, dropping
311  * our reference to the credential, and clearing the vnode's flags.
312  */
313 static int
314 acct_disable(struct thread *td, int logging)
315 {
316         int error;
317
318         sx_assert(&acct_sx, SX_XLOCKED);
319         error = vn_close(acct_vp, acct_flags, acct_cred, td);
320         crfree(acct_cred);
321         acct_configured = 0;
322         acct_vp = NULL;
323         acct_cred = NULL;
324         acct_flags = 0;
325         if (logging)
326                 log(LOG_NOTICE, "Accounting disabled\n");
327         return (error);
328 }
329
330 /*
331  * Write out process accounting information, on process exit.
332  * Data to be written out is specified in Leffler, et al.
333  * and are enumerated below.  (They're also noted in the system
334  * "acct.h" header file.)
335  */
336 int
337 acct_process(struct thread *td)
338 {
339         struct acctv3 acct;
340         struct timeval ut, st, tmp;
341         struct proc *p;
342         struct rusage ru;
343         int t, ret;
344
345         /*
346          * Lockless check of accounting condition before doing the hard
347          * work.
348          */
349         if (acct_vp == NULL || acct_suspended)
350                 return (0);
351
352         memset(&acct, 0, sizeof(acct));
353
354         sx_slock(&acct_sx);
355
356         /*
357          * If accounting isn't enabled, don't bother.  Have to check again
358          * once we own the lock in case we raced with disabling of accounting
359          * by another thread.
360          */
361         if (acct_vp == NULL || acct_suspended) {
362                 sx_sunlock(&acct_sx);
363                 return (0);
364         }
365
366         p = td->td_proc;
367         td->td_pflags2 |= TDP2_ACCT;
368
369         /*
370          * Get process accounting information.
371          */
372
373         sx_slock(&proctree_lock);
374         PROC_LOCK(p);
375
376         /* (1) The terminal from which the process was started */
377         if ((p->p_flag & P_CONTROLT) && p->p_pgrp->pg_session->s_ttyp)
378                 acct.ac_tty = tty_udev(p->p_pgrp->pg_session->s_ttyp);
379         else
380                 acct.ac_tty = NODEV;
381         sx_sunlock(&proctree_lock);
382
383         /* (2) The name of the command that ran */
384         bcopy(p->p_comm, acct.ac_comm, sizeof acct.ac_comm);
385
386         /* (3) The amount of user and system time that was used */
387         rufetchcalc(p, &ru, &ut, &st);
388         acct.ac_utime = encode_timeval(ut);
389         acct.ac_stime = encode_timeval(st);
390
391         /* (4) The elapsed time the command ran (and its starting time) */
392         getboottime(&tmp);
393         timevaladd(&tmp, &p->p_stats->p_start);
394         acct.ac_btime = tmp.tv_sec;
395         microuptime(&tmp);
396         timevalsub(&tmp, &p->p_stats->p_start);
397         acct.ac_etime = encode_timeval(tmp);
398
399         /* (5) The average amount of memory used */
400         tmp = ut;
401         timevaladd(&tmp, &st);
402         /* Convert tmp (i.e. u + s) into hz units to match ru_i*. */
403         t = tmp.tv_sec * hz + tmp.tv_usec / tick;
404         if (t)
405                 acct.ac_mem = encode_long((ru.ru_ixrss + ru.ru_idrss +
406                     + ru.ru_isrss) / t);
407         else
408                 acct.ac_mem = 0;
409
410         /* (6) The number of disk I/O operations done */
411         acct.ac_io = encode_long(ru.ru_inblock + ru.ru_oublock);
412
413         /* (7) The UID and GID of the process */
414         acct.ac_uid = p->p_ucred->cr_ruid;
415         acct.ac_gid = p->p_ucred->cr_rgid;
416
417         /* (8) The boolean flags that tell how the process terminated, etc. */
418         acct.ac_flagx = p->p_acflag;
419
420         PROC_UNLOCK(p);
421
422         /* Setup ancillary structure fields. */
423         acct.ac_flagx |= ANVER;
424         acct.ac_zero = 0;
425         acct.ac_version = 3;
426         acct.ac_len = acct.ac_len2 = sizeof(acct);
427
428         /*
429          * Write the accounting information to the file.
430          */
431         ret = vn_rdwr(UIO_WRITE, acct_vp, (caddr_t)&acct, sizeof (acct),
432             (off_t)0, UIO_SYSSPACE, IO_APPEND|IO_UNIT, acct_cred, NOCRED,
433             NULL, td);
434         sx_sunlock(&acct_sx);
435         td->td_pflags2 &= ~TDP2_ACCT;
436         return (ret);
437 }
438
439 /* FLOAT_CONVERSION_START (Regression testing; don't remove this line.) */
440
441 /* Convert timevals and longs into IEEE-754 bit patterns. */
442
443 /* Mantissa mask (MSB is implied, so subtract 1). */
444 #define MANT_MASK ((1 << (FLT_MANT_DIG - 1)) - 1)
445
446 /*
447  * We calculate integer values to a precision of approximately
448  * 28 bits.
449  * This is high-enough precision to fill the 24 float bits
450  * and low-enough to avoid overflowing the 32 int bits.
451  */
452 #define CALC_BITS 28
453
454 /* log_2(1000000). */
455 #define LOG2_1M 20
456
457 /*
458  * Convert the elements of a timeval into a 32-bit word holding
459  * the bits of a IEEE-754 float.
460  * The float value represents the timeval's value in microsecond units.
461  */
462 static uint32_t
463 encode_timeval(struct timeval tv)
464 {
465         int log2_s;
466         int val, exp;   /* Unnormalized value and exponent */
467         int norm_exp;   /* Normalized exponent */
468         int shift;
469
470         /*
471          * First calculate value and exponent to about CALC_BITS precision.
472          * Note that the following conditionals have been ordered so that
473          * the most common cases appear first.
474          */
475         if (tv.tv_sec == 0) {
476                 if (tv.tv_usec == 0)
477                         return (0);
478                 exp = 0;
479                 val = tv.tv_usec;
480         } else {
481                 /*
482                  * Calculate the value to a precision of approximately
483                  * CALC_BITS.
484                  */
485                 log2_s = fls(tv.tv_sec) - 1;
486                 if (log2_s + LOG2_1M < CALC_BITS) {
487                         exp = 0;
488                         val = 1000000 * tv.tv_sec + tv.tv_usec;
489                 } else {
490                         exp = log2_s + LOG2_1M - CALC_BITS;
491                         val = (unsigned int)(((uint64_t)1000000 * tv.tv_sec +
492                             tv.tv_usec) >> exp);
493                 }
494         }
495         /* Now normalize and pack the value into an IEEE-754 float. */
496         norm_exp = fls(val) - 1;
497         shift = FLT_MANT_DIG - norm_exp - 1;
498 #ifdef ACCT_DEBUG
499         printf("val=%d exp=%d shift=%d log2(val)=%d\n",
500             val, exp, shift, norm_exp);
501         printf("exp=%x mant=%x\n", FLT_MAX_EXP - 1 + exp + norm_exp,
502             ((shift > 0 ? (val << shift) : (val >> -shift)) & MANT_MASK));
503 #endif
504         return (((FLT_MAX_EXP - 1 + exp + norm_exp) << (FLT_MANT_DIG - 1)) |
505             ((shift > 0 ? val << shift : val >> -shift) & MANT_MASK));
506 }
507
508 /*
509  * Convert a non-negative long value into the bit pattern of
510  * an IEEE-754 float value.
511  */
512 static uint32_t
513 encode_long(long val)
514 {
515         int norm_exp;   /* Normalized exponent */
516         int shift;
517
518         if (val == 0)
519                 return (0);
520         if (val < 0) {
521                 log(LOG_NOTICE,
522                     "encode_long: negative value %ld in accounting record\n",
523                     val);
524                 val = LONG_MAX;
525         }
526         norm_exp = fls(val) - 1;
527         shift = FLT_MANT_DIG - norm_exp - 1;
528 #ifdef ACCT_DEBUG
529         printf("val=%d shift=%d log2(val)=%d\n",
530             val, shift, norm_exp);
531         printf("exp=%x mant=%x\n", FLT_MAX_EXP - 1 + exp + norm_exp,
532             ((shift > 0 ? (val << shift) : (val >> -shift)) & MANT_MASK));
533 #endif
534         return (((FLT_MAX_EXP - 1 + norm_exp) << (FLT_MANT_DIG - 1)) |
535             ((shift > 0 ? val << shift : val >> -shift) & MANT_MASK));
536 }
537
538 /* FLOAT_CONVERSION_END (Regression testing; don't remove this line.) */
539
540 /*
541  * Periodically check the filesystem to see if accounting
542  * should be turned on or off.  Beware the case where the vnode
543  * has been vgone()'d out from underneath us, e.g. when the file
544  * system containing the accounting file has been forcibly unmounted.
545  */
546 /* ARGSUSED */
547 static void
548 acctwatch(void)
549 {
550         struct statfs *sp;
551
552         sx_assert(&acct_sx, SX_XLOCKED);
553
554         /*
555          * If accounting was disabled before our kthread was scheduled,
556          * then acct_vp might be NULL.  If so, just ask our kthread to
557          * exit and return.
558          */
559         if (acct_vp == NULL) {
560                 acct_state |= ACCT_EXITREQ;
561                 return;
562         }
563
564         /*
565          * If our vnode is no longer valid, tear it down and signal the
566          * accounting thread to die.
567          */
568         if (acct_vp->v_type == VBAD) {
569                 (void) acct_disable(NULL, 1);
570                 acct_state |= ACCT_EXITREQ;
571                 return;
572         }
573
574         /*
575          * Stopping here is better than continuing, maybe it will be VBAD
576          * next time around.
577          */
578         sp = malloc(sizeof(struct statfs), M_STATFS, M_WAITOK);
579         if (VFS_STATFS(acct_vp->v_mount, sp) < 0) {
580                 free(sp, M_STATFS);
581                 return;
582         }
583         if (acct_suspended) {
584                 if (sp->f_bavail > (int64_t)(acctresume * sp->f_blocks /
585                     100)) {
586                         acct_suspended = 0;
587                         log(LOG_NOTICE, "Accounting resumed\n");
588                 }
589         } else {
590                 if (sp->f_bavail <= (int64_t)(acctsuspend * sp->f_blocks /
591                     100)) {
592                         acct_suspended = 1;
593                         log(LOG_NOTICE, "Accounting suspended\n");
594                 }
595         }
596         free(sp, M_STATFS);
597 }
598
599 /*
600  * The main loop for the dedicated kernel thread that periodically calls
601  * acctwatch().
602  */
603 static void
604 acct_thread(void *dummy)
605 {
606         u_char pri;
607
608         /* This is a low-priority kernel thread. */
609         pri = PRI_MAX_KERN;
610         thread_lock(curthread);
611         sched_prio(curthread, pri);
612         thread_unlock(curthread);
613
614         /* If another accounting kthread is already running, just die. */
615         sx_xlock(&acct_sx);
616         if (acct_state & ACCT_RUNNING) {
617                 sx_xunlock(&acct_sx);
618                 kproc_exit(0);
619         }
620         acct_state |= ACCT_RUNNING;
621
622         /* Loop until we are asked to exit. */
623         while (!(acct_state & ACCT_EXITREQ)) {
624                 /* Perform our periodic checks. */
625                 acctwatch();
626
627                 /*
628                  * We check this flag again before sleeping since the
629                  * acctwatch() might have shut down accounting and asked us
630                  * to exit.
631                  */
632                 if (!(acct_state & ACCT_EXITREQ)) {
633                         sx_sleep(&acct_state, &acct_sx, 0, "-",
634                             acctchkfreq * hz);
635                 }
636         }
637
638         /*
639          * Acknowledge the exit request and shutdown.  We clear both the
640          * exit request and running flags.
641          */
642         acct_state = 0;
643         sx_xunlock(&acct_sx);
644         kproc_exit(0);
645 }