]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/kern/kern_resource.c
uiomove_object_page(): Avoid instantiating pages in sparse regions on reads.
[FreeBSD/FreeBSD.git] / sys / kern / kern_resource.c
1 /*-
2  * Copyright (c) 1982, 1986, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)kern_resource.c     8.5 (Berkeley) 1/21/94
35  */
36
37 #include <sys/cdefs.h>
38 __FBSDID("$FreeBSD$");
39
40 #include "opt_compat.h"
41
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/sysproto.h>
45 #include <sys/file.h>
46 #include <sys/kernel.h>
47 #include <sys/lock.h>
48 #include <sys/malloc.h>
49 #include <sys/mutex.h>
50 #include <sys/priv.h>
51 #include <sys/proc.h>
52 #include <sys/refcount.h>
53 #include <sys/racct.h>
54 #include <sys/resourcevar.h>
55 #include <sys/rwlock.h>
56 #include <sys/sched.h>
57 #include <sys/sx.h>
58 #include <sys/syscallsubr.h>
59 #include <sys/sysctl.h>
60 #include <sys/sysent.h>
61 #include <sys/time.h>
62 #include <sys/umtx.h>
63
64 #include <vm/vm.h>
65 #include <vm/vm_param.h>
66 #include <vm/pmap.h>
67 #include <vm/vm_map.h>
68
69
70 static MALLOC_DEFINE(M_PLIMIT, "plimit", "plimit structures");
71 static MALLOC_DEFINE(M_UIDINFO, "uidinfo", "uidinfo structures");
72 #define UIHASH(uid)     (&uihashtbl[(uid) & uihash])
73 static struct rwlock uihashtbl_lock;
74 static LIST_HEAD(uihashhead, uidinfo) *uihashtbl;
75 static u_long uihash;           /* size of hash table - 1 */
76
77 static void     calcru1(struct proc *p, struct rusage_ext *ruxp,
78                     struct timeval *up, struct timeval *sp);
79 static int      donice(struct thread *td, struct proc *chgp, int n);
80 static struct uidinfo *uilookup(uid_t uid);
81 static void     ruxagg_locked(struct rusage_ext *rux, struct thread *td);
82
83 static __inline int     lim_shared(struct plimit *limp);
84
85 /*
86  * Resource controls and accounting.
87  */
88 #ifndef _SYS_SYSPROTO_H_
89 struct getpriority_args {
90         int     which;
91         int     who;
92 };
93 #endif
94 int
95 sys_getpriority(struct thread *td, register struct getpriority_args *uap)
96 {
97         struct proc *p;
98         struct pgrp *pg;
99         int error, low;
100
101         error = 0;
102         low = PRIO_MAX + 1;
103         switch (uap->which) {
104
105         case PRIO_PROCESS:
106                 if (uap->who == 0)
107                         low = td->td_proc->p_nice;
108                 else {
109                         p = pfind(uap->who);
110                         if (p == NULL)
111                                 break;
112                         if (p_cansee(td, p) == 0)
113                                 low = p->p_nice;
114                         PROC_UNLOCK(p);
115                 }
116                 break;
117
118         case PRIO_PGRP:
119                 sx_slock(&proctree_lock);
120                 if (uap->who == 0) {
121                         pg = td->td_proc->p_pgrp;
122                         PGRP_LOCK(pg);
123                 } else {
124                         pg = pgfind(uap->who);
125                         if (pg == NULL) {
126                                 sx_sunlock(&proctree_lock);
127                                 break;
128                         }
129                 }
130                 sx_sunlock(&proctree_lock);
131                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
132                         PROC_LOCK(p);
133                         if (p->p_state == PRS_NORMAL &&
134                             p_cansee(td, p) == 0) {
135                                 if (p->p_nice < low)
136                                         low = p->p_nice;
137                         }
138                         PROC_UNLOCK(p);
139                 }
140                 PGRP_UNLOCK(pg);
141                 break;
142
143         case PRIO_USER:
144                 if (uap->who == 0)
145                         uap->who = td->td_ucred->cr_uid;
146                 sx_slock(&allproc_lock);
147                 FOREACH_PROC_IN_SYSTEM(p) {
148                         PROC_LOCK(p);
149                         if (p->p_state == PRS_NORMAL &&
150                             p_cansee(td, p) == 0 &&
151                             p->p_ucred->cr_uid == uap->who) {
152                                 if (p->p_nice < low)
153                                         low = p->p_nice;
154                         }
155                         PROC_UNLOCK(p);
156                 }
157                 sx_sunlock(&allproc_lock);
158                 break;
159
160         default:
161                 error = EINVAL;
162                 break;
163         }
164         if (low == PRIO_MAX + 1 && error == 0)
165                 error = ESRCH;
166         td->td_retval[0] = low;
167         return (error);
168 }
169
170 #ifndef _SYS_SYSPROTO_H_
171 struct setpriority_args {
172         int     which;
173         int     who;
174         int     prio;
175 };
176 #endif
177 int
178 sys_setpriority(struct thread *td, struct setpriority_args *uap)
179 {
180         struct proc *curp, *p;
181         struct pgrp *pg;
182         int found = 0, error = 0;
183
184         curp = td->td_proc;
185         switch (uap->which) {
186         case PRIO_PROCESS:
187                 if (uap->who == 0) {
188                         PROC_LOCK(curp);
189                         error = donice(td, curp, uap->prio);
190                         PROC_UNLOCK(curp);
191                 } else {
192                         p = pfind(uap->who);
193                         if (p == NULL)
194                                 break;
195                         error = p_cansee(td, p);
196                         if (error == 0)
197                                 error = donice(td, p, uap->prio);
198                         PROC_UNLOCK(p);
199                 }
200                 found++;
201                 break;
202
203         case PRIO_PGRP:
204                 sx_slock(&proctree_lock);
205                 if (uap->who == 0) {
206                         pg = curp->p_pgrp;
207                         PGRP_LOCK(pg);
208                 } else {
209                         pg = pgfind(uap->who);
210                         if (pg == NULL) {
211                                 sx_sunlock(&proctree_lock);
212                                 break;
213                         }
214                 }
215                 sx_sunlock(&proctree_lock);
216                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
217                         PROC_LOCK(p);
218                         if (p->p_state == PRS_NORMAL &&
219                             p_cansee(td, p) == 0) {
220                                 error = donice(td, p, uap->prio);
221                                 found++;
222                         }
223                         PROC_UNLOCK(p);
224                 }
225                 PGRP_UNLOCK(pg);
226                 break;
227
228         case PRIO_USER:
229                 if (uap->who == 0)
230                         uap->who = td->td_ucred->cr_uid;
231                 sx_slock(&allproc_lock);
232                 FOREACH_PROC_IN_SYSTEM(p) {
233                         PROC_LOCK(p);
234                         if (p->p_state == PRS_NORMAL &&
235                             p->p_ucred->cr_uid == uap->who &&
236                             p_cansee(td, p) == 0) {
237                                 error = donice(td, p, uap->prio);
238                                 found++;
239                         }
240                         PROC_UNLOCK(p);
241                 }
242                 sx_sunlock(&allproc_lock);
243                 break;
244
245         default:
246                 error = EINVAL;
247                 break;
248         }
249         if (found == 0 && error == 0)
250                 error = ESRCH;
251         return (error);
252 }
253
254 /*
255  * Set "nice" for a (whole) process.
256  */
257 static int
258 donice(struct thread *td, struct proc *p, int n)
259 {
260         int error;
261
262         PROC_LOCK_ASSERT(p, MA_OWNED);
263         if ((error = p_cansched(td, p)))
264                 return (error);
265         if (n > PRIO_MAX)
266                 n = PRIO_MAX;
267         if (n < PRIO_MIN)
268                 n = PRIO_MIN;
269         if (n < p->p_nice && priv_check(td, PRIV_SCHED_SETPRIORITY) != 0)
270                 return (EACCES);
271         sched_nice(p, n);
272         return (0);
273 }
274
275 static int unprivileged_idprio;
276 SYSCTL_INT(_security_bsd, OID_AUTO, unprivileged_idprio, CTLFLAG_RW,
277     &unprivileged_idprio, 0, "Allow non-root users to set an idle priority");
278
279 /*
280  * Set realtime priority for LWP.
281  */
282 #ifndef _SYS_SYSPROTO_H_
283 struct rtprio_thread_args {
284         int             function;
285         lwpid_t         lwpid;
286         struct rtprio   *rtp;
287 };
288 #endif
289 int
290 sys_rtprio_thread(struct thread *td, struct rtprio_thread_args *uap)
291 {
292         struct proc *p;
293         struct rtprio rtp;
294         struct thread *td1;
295         int cierror, error;
296
297         /* Perform copyin before acquiring locks if needed. */
298         if (uap->function == RTP_SET)
299                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
300         else
301                 cierror = 0;
302
303         if (uap->lwpid == 0 || uap->lwpid == td->td_tid) {
304                 p = td->td_proc;
305                 td1 = td;
306                 PROC_LOCK(p);
307         } else {
308                 /* Only look up thread in current process */
309                 td1 = tdfind(uap->lwpid, curproc->p_pid);
310                 if (td1 == NULL)
311                         return (ESRCH);
312                 p = td1->td_proc;
313         }
314
315         switch (uap->function) {
316         case RTP_LOOKUP:
317                 if ((error = p_cansee(td, p)))
318                         break;
319                 pri_to_rtp(td1, &rtp);
320                 PROC_UNLOCK(p);
321                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
322         case RTP_SET:
323                 if ((error = p_cansched(td, p)) || (error = cierror))
324                         break;
325
326                 /* Disallow setting rtprio in most cases if not superuser. */
327
328                 /*
329                  * Realtime priority has to be restricted for reasons which
330                  * should be obvious.  However, for idleprio processes, there is
331                  * a potential for system deadlock if an idleprio process gains
332                  * a lock on a resource that other processes need (and the
333                  * idleprio process can't run due to a CPU-bound normal
334                  * process).  Fix me!  XXX
335                  *
336                  * This problem is not only related to idleprio process.
337                  * A user level program can obtain a file lock and hold it
338                  * indefinitely.  Additionally, without idleprio processes it is
339                  * still conceivable that a program with low priority will never
340                  * get to run.  In short, allowing this feature might make it
341                  * easier to lock a resource indefinitely, but it is not the
342                  * only thing that makes it possible.
343                  */
344                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
345                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
346                     unprivileged_idprio == 0)) {
347                         error = priv_check(td, PRIV_SCHED_RTPRIO);
348                         if (error)
349                                 break;
350                 }
351                 error = rtp_to_pri(&rtp, td1);
352                 break;
353         default:
354                 error = EINVAL;
355                 break;
356         }
357         PROC_UNLOCK(p);
358         return (error);
359 }
360
361 /*
362  * Set realtime priority.
363  */
364 #ifndef _SYS_SYSPROTO_H_
365 struct rtprio_args {
366         int             function;
367         pid_t           pid;
368         struct rtprio   *rtp;
369 };
370 #endif
371 int
372 sys_rtprio(struct thread *td, register struct rtprio_args *uap)
373 {
374         struct proc *p;
375         struct thread *tdp;
376         struct rtprio rtp;
377         int cierror, error;
378
379         /* Perform copyin before acquiring locks if needed. */
380         if (uap->function == RTP_SET)
381                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
382         else
383                 cierror = 0;
384
385         if (uap->pid == 0) {
386                 p = td->td_proc;
387                 PROC_LOCK(p);
388         } else {
389                 p = pfind(uap->pid);
390                 if (p == NULL)
391                         return (ESRCH);
392         }
393
394         switch (uap->function) {
395         case RTP_LOOKUP:
396                 if ((error = p_cansee(td, p)))
397                         break;
398                 /*
399                  * Return OUR priority if no pid specified,
400                  * or if one is, report the highest priority
401                  * in the process.  There isn't much more you can do as
402                  * there is only room to return a single priority.
403                  * Note: specifying our own pid is not the same
404                  * as leaving it zero.
405                  */
406                 if (uap->pid == 0) {
407                         pri_to_rtp(td, &rtp);
408                 } else {
409                         struct rtprio rtp2;
410
411                         rtp.type = RTP_PRIO_IDLE;
412                         rtp.prio = RTP_PRIO_MAX;
413                         FOREACH_THREAD_IN_PROC(p, tdp) {
414                                 pri_to_rtp(tdp, &rtp2);
415                                 if (rtp2.type <  rtp.type ||
416                                     (rtp2.type == rtp.type &&
417                                     rtp2.prio < rtp.prio)) {
418                                         rtp.type = rtp2.type;
419                                         rtp.prio = rtp2.prio;
420                                 }
421                         }
422                 }
423                 PROC_UNLOCK(p);
424                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
425         case RTP_SET:
426                 if ((error = p_cansched(td, p)) || (error = cierror))
427                         break;
428
429                 /*
430                  * Disallow setting rtprio in most cases if not superuser.
431                  * See the comment in sys_rtprio_thread about idprio
432                  * threads holding a lock.
433                  */
434                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
435                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
436                     !unprivileged_idprio)) {
437                         error = priv_check(td, PRIV_SCHED_RTPRIO);
438                         if (error)
439                                 break;
440                 }
441
442                 /*
443                  * If we are setting our own priority, set just our
444                  * thread but if we are doing another process,
445                  * do all the threads on that process. If we
446                  * specify our own pid we do the latter.
447                  */
448                 if (uap->pid == 0) {
449                         error = rtp_to_pri(&rtp, td);
450                 } else {
451                         FOREACH_THREAD_IN_PROC(p, td) {
452                                 if ((error = rtp_to_pri(&rtp, td)) != 0)
453                                         break;
454                         }
455                 }
456                 break;
457         default:
458                 error = EINVAL;
459                 break;
460         }
461         PROC_UNLOCK(p);
462         return (error);
463 }
464
465 int
466 rtp_to_pri(struct rtprio *rtp, struct thread *td)
467 {
468         u_char  newpri, oldclass, oldpri;
469
470         switch (RTP_PRIO_BASE(rtp->type)) {
471         case RTP_PRIO_REALTIME:
472                 if (rtp->prio > RTP_PRIO_MAX)
473                         return (EINVAL);
474                 newpri = PRI_MIN_REALTIME + rtp->prio;
475                 break;
476         case RTP_PRIO_NORMAL:
477                 if (rtp->prio > (PRI_MAX_TIMESHARE - PRI_MIN_TIMESHARE))
478                         return (EINVAL);
479                 newpri = PRI_MIN_TIMESHARE + rtp->prio;
480                 break;
481         case RTP_PRIO_IDLE:
482                 if (rtp->prio > RTP_PRIO_MAX)
483                         return (EINVAL);
484                 newpri = PRI_MIN_IDLE + rtp->prio;
485                 break;
486         default:
487                 return (EINVAL);
488         }
489
490         thread_lock(td);
491         oldclass = td->td_pri_class;
492         sched_class(td, rtp->type);     /* XXX fix */
493         oldpri = td->td_user_pri;
494         sched_user_prio(td, newpri);
495         if (td->td_user_pri != oldpri && (oldclass != RTP_PRIO_NORMAL ||
496             td->td_pri_class != RTP_PRIO_NORMAL))
497                 sched_prio(td, td->td_user_pri);
498         if (TD_ON_UPILOCK(td) && oldpri != newpri) {
499                 critical_enter();
500                 thread_unlock(td);
501                 umtx_pi_adjust(td, oldpri);
502                 critical_exit();
503         } else
504                 thread_unlock(td);
505         return (0);
506 }
507
508 void
509 pri_to_rtp(struct thread *td, struct rtprio *rtp)
510 {
511
512         thread_lock(td);
513         switch (PRI_BASE(td->td_pri_class)) {
514         case PRI_REALTIME:
515                 rtp->prio = td->td_base_user_pri - PRI_MIN_REALTIME;
516                 break;
517         case PRI_TIMESHARE:
518                 rtp->prio = td->td_base_user_pri - PRI_MIN_TIMESHARE;
519                 break;
520         case PRI_IDLE:
521                 rtp->prio = td->td_base_user_pri - PRI_MIN_IDLE;
522                 break;
523         default:
524                 break;
525         }
526         rtp->type = td->td_pri_class;
527         thread_unlock(td);
528 }
529
530 #if defined(COMPAT_43)
531 #ifndef _SYS_SYSPROTO_H_
532 struct osetrlimit_args {
533         u_int   which;
534         struct  orlimit *rlp;
535 };
536 #endif
537 int
538 osetrlimit(struct thread *td, register struct osetrlimit_args *uap)
539 {
540         struct orlimit olim;
541         struct rlimit lim;
542         int error;
543
544         if ((error = copyin(uap->rlp, &olim, sizeof(struct orlimit))))
545                 return (error);
546         lim.rlim_cur = olim.rlim_cur;
547         lim.rlim_max = olim.rlim_max;
548         error = kern_setrlimit(td, uap->which, &lim);
549         return (error);
550 }
551
552 #ifndef _SYS_SYSPROTO_H_
553 struct ogetrlimit_args {
554         u_int   which;
555         struct  orlimit *rlp;
556 };
557 #endif
558 int
559 ogetrlimit(struct thread *td, register struct ogetrlimit_args *uap)
560 {
561         struct orlimit olim;
562         struct rlimit rl;
563         struct proc *p;
564         int error;
565
566         if (uap->which >= RLIM_NLIMITS)
567                 return (EINVAL);
568         p = td->td_proc;
569         PROC_LOCK(p);
570         lim_rlimit(p, uap->which, &rl);
571         PROC_UNLOCK(p);
572
573         /*
574          * XXX would be more correct to convert only RLIM_INFINITY to the
575          * old RLIM_INFINITY and fail with EOVERFLOW for other larger
576          * values.  Most 64->32 and 32->16 conversions, including not
577          * unimportant ones of uids are even more broken than what we
578          * do here (they blindly truncate).  We don't do this correctly
579          * here since we have little experience with EOVERFLOW yet.
580          * Elsewhere, getuid() can't fail...
581          */
582         olim.rlim_cur = rl.rlim_cur > 0x7fffffff ? 0x7fffffff : rl.rlim_cur;
583         olim.rlim_max = rl.rlim_max > 0x7fffffff ? 0x7fffffff : rl.rlim_max;
584         error = copyout(&olim, uap->rlp, sizeof(olim));
585         return (error);
586 }
587 #endif /* COMPAT_43 */
588
589 #ifndef _SYS_SYSPROTO_H_
590 struct __setrlimit_args {
591         u_int   which;
592         struct  rlimit *rlp;
593 };
594 #endif
595 int
596 sys_setrlimit(struct thread *td, register struct __setrlimit_args *uap)
597 {
598         struct rlimit alim;
599         int error;
600
601         if ((error = copyin(uap->rlp, &alim, sizeof(struct rlimit))))
602                 return (error);
603         error = kern_setrlimit(td, uap->which, &alim);
604         return (error);
605 }
606
607 static void
608 lim_cb(void *arg)
609 {
610         struct rlimit rlim;
611         struct thread *td;
612         struct proc *p;
613
614         p = arg;
615         PROC_LOCK_ASSERT(p, MA_OWNED);
616         /*
617          * Check if the process exceeds its cpu resource allocation.  If
618          * it reaches the max, arrange to kill the process in ast().
619          */
620         if (p->p_cpulimit == RLIM_INFINITY)
621                 return;
622         PROC_STATLOCK(p);
623         FOREACH_THREAD_IN_PROC(p, td) {
624                 ruxagg(p, td);
625         }
626         PROC_STATUNLOCK(p);
627         if (p->p_rux.rux_runtime > p->p_cpulimit * cpu_tickrate()) {
628                 lim_rlimit(p, RLIMIT_CPU, &rlim);
629                 if (p->p_rux.rux_runtime >= rlim.rlim_max * cpu_tickrate()) {
630                         killproc(p, "exceeded maximum CPU limit");
631                 } else {
632                         if (p->p_cpulimit < rlim.rlim_max)
633                                 p->p_cpulimit += 5;
634                         kern_psignal(p, SIGXCPU);
635                 }
636         }
637         if ((p->p_flag & P_WEXIT) == 0)
638                 callout_reset_sbt(&p->p_limco, SBT_1S, 0,
639                     lim_cb, p, C_PREL(1));
640 }
641
642 int
643 kern_setrlimit(struct thread *td, u_int which, struct rlimit *limp)
644 {
645
646         return (kern_proc_setrlimit(td, td->td_proc, which, limp));
647 }
648
649 int
650 kern_proc_setrlimit(struct thread *td, struct proc *p, u_int which,
651     struct rlimit *limp)
652 {
653         struct plimit *newlim, *oldlim;
654         register struct rlimit *alimp;
655         struct rlimit oldssiz;
656         int error;
657
658         if (which >= RLIM_NLIMITS)
659                 return (EINVAL);
660
661         /*
662          * Preserve historical bugs by treating negative limits as unsigned.
663          */
664         if (limp->rlim_cur < 0)
665                 limp->rlim_cur = RLIM_INFINITY;
666         if (limp->rlim_max < 0)
667                 limp->rlim_max = RLIM_INFINITY;
668
669         oldssiz.rlim_cur = 0;
670         newlim = NULL;
671         PROC_LOCK(p);
672         if (lim_shared(p->p_limit)) {
673                 PROC_UNLOCK(p);
674                 newlim = lim_alloc();
675                 PROC_LOCK(p);
676         }
677         oldlim = p->p_limit;
678         alimp = &oldlim->pl_rlimit[which];
679         if (limp->rlim_cur > alimp->rlim_max ||
680             limp->rlim_max > alimp->rlim_max)
681                 if ((error = priv_check(td, PRIV_PROC_SETRLIMIT))) {
682                         PROC_UNLOCK(p);
683                         if (newlim != NULL)
684                                 lim_free(newlim);
685                         return (error);
686                 }
687         if (limp->rlim_cur > limp->rlim_max)
688                 limp->rlim_cur = limp->rlim_max;
689         if (newlim != NULL) {
690                 lim_copy(newlim, oldlim);
691                 alimp = &newlim->pl_rlimit[which];
692         }
693
694         switch (which) {
695
696         case RLIMIT_CPU:
697                 if (limp->rlim_cur != RLIM_INFINITY &&
698                     p->p_cpulimit == RLIM_INFINITY)
699                         callout_reset_sbt(&p->p_limco, SBT_1S, 0,
700                             lim_cb, p, C_PREL(1));
701                 p->p_cpulimit = limp->rlim_cur;
702                 break;
703         case RLIMIT_DATA:
704                 if (limp->rlim_cur > maxdsiz)
705                         limp->rlim_cur = maxdsiz;
706                 if (limp->rlim_max > maxdsiz)
707                         limp->rlim_max = maxdsiz;
708                 break;
709
710         case RLIMIT_STACK:
711                 if (limp->rlim_cur > maxssiz)
712                         limp->rlim_cur = maxssiz;
713                 if (limp->rlim_max > maxssiz)
714                         limp->rlim_max = maxssiz;
715                 oldssiz = *alimp;
716                 if (p->p_sysent->sv_fixlimit != NULL)
717                         p->p_sysent->sv_fixlimit(&oldssiz,
718                             RLIMIT_STACK);
719                 break;
720
721         case RLIMIT_NOFILE:
722                 if (limp->rlim_cur > maxfilesperproc)
723                         limp->rlim_cur = maxfilesperproc;
724                 if (limp->rlim_max > maxfilesperproc)
725                         limp->rlim_max = maxfilesperproc;
726                 break;
727
728         case RLIMIT_NPROC:
729                 if (limp->rlim_cur > maxprocperuid)
730                         limp->rlim_cur = maxprocperuid;
731                 if (limp->rlim_max > maxprocperuid)
732                         limp->rlim_max = maxprocperuid;
733                 if (limp->rlim_cur < 1)
734                         limp->rlim_cur = 1;
735                 if (limp->rlim_max < 1)
736                         limp->rlim_max = 1;
737                 break;
738         }
739         if (p->p_sysent->sv_fixlimit != NULL)
740                 p->p_sysent->sv_fixlimit(limp, which);
741         *alimp = *limp;
742         if (newlim != NULL)
743                 p->p_limit = newlim;
744         PROC_UNLOCK(p);
745         if (newlim != NULL)
746                 lim_free(oldlim);
747
748         if (which == RLIMIT_STACK) {
749                 /*
750                  * Stack is allocated to the max at exec time with only
751                  * "rlim_cur" bytes accessible.  If stack limit is going
752                  * up make more accessible, if going down make inaccessible.
753                  */
754                 if (limp->rlim_cur != oldssiz.rlim_cur) {
755                         vm_offset_t addr;
756                         vm_size_t size;
757                         vm_prot_t prot;
758
759                         if (limp->rlim_cur > oldssiz.rlim_cur) {
760                                 prot = p->p_sysent->sv_stackprot;
761                                 size = limp->rlim_cur - oldssiz.rlim_cur;
762                                 addr = p->p_sysent->sv_usrstack -
763                                     limp->rlim_cur;
764                         } else {
765                                 prot = VM_PROT_NONE;
766                                 size = oldssiz.rlim_cur - limp->rlim_cur;
767                                 addr = p->p_sysent->sv_usrstack -
768                                     oldssiz.rlim_cur;
769                         }
770                         addr = trunc_page(addr);
771                         size = round_page(size);
772                         (void)vm_map_protect(&p->p_vmspace->vm_map,
773                             addr, addr + size, prot, FALSE);
774                 }
775         }
776
777         return (0);
778 }
779
780 #ifndef _SYS_SYSPROTO_H_
781 struct __getrlimit_args {
782         u_int   which;
783         struct  rlimit *rlp;
784 };
785 #endif
786 /* ARGSUSED */
787 int
788 sys_getrlimit(struct thread *td, register struct __getrlimit_args *uap)
789 {
790         struct rlimit rlim;
791         struct proc *p;
792         int error;
793
794         if (uap->which >= RLIM_NLIMITS)
795                 return (EINVAL);
796         p = td->td_proc;
797         PROC_LOCK(p);
798         lim_rlimit(p, uap->which, &rlim);
799         PROC_UNLOCK(p);
800         error = copyout(&rlim, uap->rlp, sizeof(struct rlimit));
801         return (error);
802 }
803
804 /*
805  * Transform the running time and tick information for children of proc p
806  * into user and system time usage.
807  */
808 void
809 calccru(struct proc *p, struct timeval *up, struct timeval *sp)
810 {
811
812         PROC_LOCK_ASSERT(p, MA_OWNED);
813         calcru1(p, &p->p_crux, up, sp);
814 }
815
816 /*
817  * Transform the running time and tick information in proc p into user
818  * and system time usage.  If appropriate, include the current time slice
819  * on this CPU.
820  */
821 void
822 calcru(struct proc *p, struct timeval *up, struct timeval *sp)
823 {
824         struct thread *td;
825         uint64_t runtime, u;
826
827         PROC_LOCK_ASSERT(p, MA_OWNED);
828         PROC_STATLOCK_ASSERT(p, MA_OWNED);
829         /*
830          * If we are getting stats for the current process, then add in the
831          * stats that this thread has accumulated in its current time slice.
832          * We reset the thread and CPU state as if we had performed a context
833          * switch right here.
834          */
835         td = curthread;
836         if (td->td_proc == p) {
837                 u = cpu_ticks();
838                 runtime = u - PCPU_GET(switchtime);
839                 td->td_runtime += runtime;
840                 td->td_incruntime += runtime;
841                 PCPU_SET(switchtime, u);
842         }
843         /* Make sure the per-thread stats are current. */
844         FOREACH_THREAD_IN_PROC(p, td) {
845                 if (td->td_incruntime == 0)
846                         continue;
847                 ruxagg(p, td);
848         }
849         calcru1(p, &p->p_rux, up, sp);
850 }
851
852 /* Collect resource usage for a single thread. */
853 void
854 rufetchtd(struct thread *td, struct rusage *ru)
855 {
856         struct proc *p;
857         uint64_t runtime, u;
858
859         p = td->td_proc;
860         PROC_STATLOCK_ASSERT(p, MA_OWNED);
861         THREAD_LOCK_ASSERT(td, MA_OWNED);
862         /*
863          * If we are getting stats for the current thread, then add in the
864          * stats that this thread has accumulated in its current time slice.
865          * We reset the thread and CPU state as if we had performed a context
866          * switch right here.
867          */
868         if (td == curthread) {
869                 u = cpu_ticks();
870                 runtime = u - PCPU_GET(switchtime);
871                 td->td_runtime += runtime;
872                 td->td_incruntime += runtime;
873                 PCPU_SET(switchtime, u);
874         }
875         ruxagg(p, td);
876         *ru = td->td_ru;
877         calcru1(p, &td->td_rux, &ru->ru_utime, &ru->ru_stime);
878 }
879
880 static void
881 calcru1(struct proc *p, struct rusage_ext *ruxp, struct timeval *up,
882     struct timeval *sp)
883 {
884         /* {user, system, interrupt, total} {ticks, usec}: */
885         uint64_t ut, uu, st, su, it, tt, tu;
886
887         ut = ruxp->rux_uticks;
888         st = ruxp->rux_sticks;
889         it = ruxp->rux_iticks;
890         tt = ut + st + it;
891         if (tt == 0) {
892                 /* Avoid divide by zero */
893                 st = 1;
894                 tt = 1;
895         }
896         tu = cputick2usec(ruxp->rux_runtime);
897         if ((int64_t)tu < 0) {
898                 /* XXX: this should be an assert /phk */
899                 printf("calcru: negative runtime of %jd usec for pid %d (%s)\n",
900                     (intmax_t)tu, p->p_pid, p->p_comm);
901                 tu = ruxp->rux_tu;
902         }
903
904         if (tu >= ruxp->rux_tu) {
905                 /*
906                  * The normal case, time increased.
907                  * Enforce monotonicity of bucketed numbers.
908                  */
909                 uu = (tu * ut) / tt;
910                 if (uu < ruxp->rux_uu)
911                         uu = ruxp->rux_uu;
912                 su = (tu * st) / tt;
913                 if (su < ruxp->rux_su)
914                         su = ruxp->rux_su;
915         } else if (tu + 3 > ruxp->rux_tu || 101 * tu > 100 * ruxp->rux_tu) {
916                 /*
917                  * When we calibrate the cputicker, it is not uncommon to
918                  * see the presumably fixed frequency increase slightly over
919                  * time as a result of thermal stabilization and NTP
920                  * discipline (of the reference clock).  We therefore ignore
921                  * a bit of backwards slop because we  expect to catch up
922                  * shortly.  We use a 3 microsecond limit to catch low
923                  * counts and a 1% limit for high counts.
924                  */
925                 uu = ruxp->rux_uu;
926                 su = ruxp->rux_su;
927                 tu = ruxp->rux_tu;
928         } else { /* tu < ruxp->rux_tu */
929                 /*
930                  * What happened here was likely that a laptop, which ran at
931                  * a reduced clock frequency at boot, kicked into high gear.
932                  * The wisdom of spamming this message in that case is
933                  * dubious, but it might also be indicative of something
934                  * serious, so lets keep it and hope laptops can be made
935                  * more truthful about their CPU speed via ACPI.
936                  */
937                 printf("calcru: runtime went backwards from %ju usec "
938                     "to %ju usec for pid %d (%s)\n",
939                     (uintmax_t)ruxp->rux_tu, (uintmax_t)tu,
940                     p->p_pid, p->p_comm);
941                 uu = (tu * ut) / tt;
942                 su = (tu * st) / tt;
943         }
944
945         ruxp->rux_uu = uu;
946         ruxp->rux_su = su;
947         ruxp->rux_tu = tu;
948
949         up->tv_sec = uu / 1000000;
950         up->tv_usec = uu % 1000000;
951         sp->tv_sec = su / 1000000;
952         sp->tv_usec = su % 1000000;
953 }
954
955 #ifndef _SYS_SYSPROTO_H_
956 struct getrusage_args {
957         int     who;
958         struct  rusage *rusage;
959 };
960 #endif
961 int
962 sys_getrusage(register struct thread *td, register struct getrusage_args *uap)
963 {
964         struct rusage ru;
965         int error;
966
967         error = kern_getrusage(td, uap->who, &ru);
968         if (error == 0)
969                 error = copyout(&ru, uap->rusage, sizeof(struct rusage));
970         return (error);
971 }
972
973 int
974 kern_getrusage(struct thread *td, int who, struct rusage *rup)
975 {
976         struct proc *p;
977         int error;
978
979         error = 0;
980         p = td->td_proc;
981         PROC_LOCK(p);
982         switch (who) {
983         case RUSAGE_SELF:
984                 rufetchcalc(p, rup, &rup->ru_utime,
985                     &rup->ru_stime);
986                 break;
987
988         case RUSAGE_CHILDREN:
989                 *rup = p->p_stats->p_cru;
990                 calccru(p, &rup->ru_utime, &rup->ru_stime);
991                 break;
992
993         case RUSAGE_THREAD:
994                 PROC_STATLOCK(p);
995                 thread_lock(td);
996                 rufetchtd(td, rup);
997                 thread_unlock(td);
998                 PROC_STATUNLOCK(p);
999                 break;
1000
1001         default:
1002                 error = EINVAL;
1003         }
1004         PROC_UNLOCK(p);
1005         return (error);
1006 }
1007
1008 void
1009 rucollect(struct rusage *ru, struct rusage *ru2)
1010 {
1011         long *ip, *ip2;
1012         int i;
1013
1014         if (ru->ru_maxrss < ru2->ru_maxrss)
1015                 ru->ru_maxrss = ru2->ru_maxrss;
1016         ip = &ru->ru_first;
1017         ip2 = &ru2->ru_first;
1018         for (i = &ru->ru_last - &ru->ru_first; i >= 0; i--)
1019                 *ip++ += *ip2++;
1020 }
1021
1022 void
1023 ruadd(struct rusage *ru, struct rusage_ext *rux, struct rusage *ru2,
1024     struct rusage_ext *rux2)
1025 {
1026
1027         rux->rux_runtime += rux2->rux_runtime;
1028         rux->rux_uticks += rux2->rux_uticks;
1029         rux->rux_sticks += rux2->rux_sticks;
1030         rux->rux_iticks += rux2->rux_iticks;
1031         rux->rux_uu += rux2->rux_uu;
1032         rux->rux_su += rux2->rux_su;
1033         rux->rux_tu += rux2->rux_tu;
1034         rucollect(ru, ru2);
1035 }
1036
1037 /*
1038  * Aggregate tick counts into the proc's rusage_ext.
1039  */
1040 static void
1041 ruxagg_locked(struct rusage_ext *rux, struct thread *td)
1042 {
1043
1044         THREAD_LOCK_ASSERT(td, MA_OWNED);
1045         PROC_STATLOCK_ASSERT(td->td_proc, MA_OWNED);
1046         rux->rux_runtime += td->td_incruntime;
1047         rux->rux_uticks += td->td_uticks;
1048         rux->rux_sticks += td->td_sticks;
1049         rux->rux_iticks += td->td_iticks;
1050 }
1051
1052 void
1053 ruxagg(struct proc *p, struct thread *td)
1054 {
1055
1056         thread_lock(td);
1057         ruxagg_locked(&p->p_rux, td);
1058         ruxagg_locked(&td->td_rux, td);
1059         td->td_incruntime = 0;
1060         td->td_uticks = 0;
1061         td->td_iticks = 0;
1062         td->td_sticks = 0;
1063         thread_unlock(td);
1064 }
1065
1066 /*
1067  * Update the rusage_ext structure and fetch a valid aggregate rusage
1068  * for proc p if storage for one is supplied.
1069  */
1070 void
1071 rufetch(struct proc *p, struct rusage *ru)
1072 {
1073         struct thread *td;
1074
1075         PROC_STATLOCK_ASSERT(p, MA_OWNED);
1076
1077         *ru = p->p_ru;
1078         if (p->p_numthreads > 0)  {
1079                 FOREACH_THREAD_IN_PROC(p, td) {
1080                         ruxagg(p, td);
1081                         rucollect(ru, &td->td_ru);
1082                 }
1083         }
1084 }
1085
1086 /*
1087  * Atomically perform a rufetch and a calcru together.
1088  * Consumers, can safely assume the calcru is executed only once
1089  * rufetch is completed.
1090  */
1091 void
1092 rufetchcalc(struct proc *p, struct rusage *ru, struct timeval *up,
1093     struct timeval *sp)
1094 {
1095
1096         PROC_STATLOCK(p);
1097         rufetch(p, ru);
1098         calcru(p, up, sp);
1099         PROC_STATUNLOCK(p);
1100 }
1101
1102 /*
1103  * Allocate a new resource limits structure and initialize its
1104  * reference count and mutex pointer.
1105  */
1106 struct plimit *
1107 lim_alloc()
1108 {
1109         struct plimit *limp;
1110
1111         limp = malloc(sizeof(struct plimit), M_PLIMIT, M_WAITOK);
1112         refcount_init(&limp->pl_refcnt, 1);
1113         return (limp);
1114 }
1115
1116 struct plimit *
1117 lim_hold(struct plimit *limp)
1118 {
1119
1120         refcount_acquire(&limp->pl_refcnt);
1121         return (limp);
1122 }
1123
1124 static __inline int
1125 lim_shared(struct plimit *limp)
1126 {
1127
1128         return (limp->pl_refcnt > 1);
1129 }
1130
1131 void
1132 lim_fork(struct proc *p1, struct proc *p2)
1133 {
1134
1135         PROC_LOCK_ASSERT(p1, MA_OWNED);
1136         PROC_LOCK_ASSERT(p2, MA_OWNED);
1137
1138         p2->p_limit = lim_hold(p1->p_limit);
1139         callout_init_mtx(&p2->p_limco, &p2->p_mtx, 0);
1140         if (p1->p_cpulimit != RLIM_INFINITY)
1141                 callout_reset_sbt(&p2->p_limco, SBT_1S, 0,
1142                     lim_cb, p2, C_PREL(1));
1143 }
1144
1145 void
1146 lim_free(struct plimit *limp)
1147 {
1148
1149         if (refcount_release(&limp->pl_refcnt))
1150                 free((void *)limp, M_PLIMIT);
1151 }
1152
1153 /*
1154  * Make a copy of the plimit structure.
1155  * We share these structures copy-on-write after fork.
1156  */
1157 void
1158 lim_copy(struct plimit *dst, struct plimit *src)
1159 {
1160
1161         KASSERT(!lim_shared(dst), ("lim_copy to shared limit"));
1162         bcopy(src->pl_rlimit, dst->pl_rlimit, sizeof(src->pl_rlimit));
1163 }
1164
1165 /*
1166  * Return the hard limit for a particular system resource.  The
1167  * which parameter specifies the index into the rlimit array.
1168  */
1169 rlim_t
1170 lim_max(struct proc *p, int which)
1171 {
1172         struct rlimit rl;
1173
1174         lim_rlimit(p, which, &rl);
1175         return (rl.rlim_max);
1176 }
1177
1178 /*
1179  * Return the current (soft) limit for a particular system resource.
1180  * The which parameter which specifies the index into the rlimit array
1181  */
1182 rlim_t
1183 lim_cur(struct proc *p, int which)
1184 {
1185         struct rlimit rl;
1186
1187         lim_rlimit(p, which, &rl);
1188         return (rl.rlim_cur);
1189 }
1190
1191 /*
1192  * Return a copy of the entire rlimit structure for the system limit
1193  * specified by 'which' in the rlimit structure pointed to by 'rlp'.
1194  */
1195 void
1196 lim_rlimit(struct proc *p, int which, struct rlimit *rlp)
1197 {
1198
1199         PROC_LOCK_ASSERT(p, MA_OWNED);
1200         KASSERT(which >= 0 && which < RLIM_NLIMITS,
1201             ("request for invalid resource limit"));
1202         *rlp = p->p_limit->pl_rlimit[which];
1203         if (p->p_sysent->sv_fixlimit != NULL)
1204                 p->p_sysent->sv_fixlimit(rlp, which);
1205 }
1206
1207 void
1208 uihashinit()
1209 {
1210
1211         uihashtbl = hashinit(maxproc / 16, M_UIDINFO, &uihash);
1212         rw_init(&uihashtbl_lock, "uidinfo hash");
1213 }
1214
1215 /*
1216  * Look up a uidinfo struct for the parameter uid.
1217  * uihashtbl_lock must be locked.
1218  * Increase refcount on uidinfo struct returned.
1219  */
1220 static struct uidinfo *
1221 uilookup(uid_t uid)
1222 {
1223         struct uihashhead *uipp;
1224         struct uidinfo *uip;
1225
1226         rw_assert(&uihashtbl_lock, RA_LOCKED);
1227         uipp = UIHASH(uid);
1228         LIST_FOREACH(uip, uipp, ui_hash)
1229                 if (uip->ui_uid == uid) {
1230                         uihold(uip);
1231                         break;
1232                 }
1233
1234         return (uip);
1235 }
1236
1237 /*
1238  * Find or allocate a struct uidinfo for a particular uid.
1239  * Returns with uidinfo struct referenced.
1240  * uifree() should be called on a struct uidinfo when released.
1241  */
1242 struct uidinfo *
1243 uifind(uid_t uid)
1244 {
1245         struct uidinfo *new_uip, *uip;
1246
1247         rw_rlock(&uihashtbl_lock);
1248         uip = uilookup(uid);
1249         rw_runlock(&uihashtbl_lock);
1250         if (uip != NULL)
1251                 return (uip);
1252
1253         new_uip = malloc(sizeof(*new_uip), M_UIDINFO, M_WAITOK | M_ZERO);
1254         racct_create(&new_uip->ui_racct);
1255         refcount_init(&new_uip->ui_ref, 1);
1256         new_uip->ui_uid = uid;
1257         mtx_init(&new_uip->ui_vmsize_mtx, "ui_vmsize", NULL, MTX_DEF);
1258
1259         rw_wlock(&uihashtbl_lock);
1260         /*
1261          * There's a chance someone created our uidinfo while we
1262          * were in malloc and not holding the lock, so we have to
1263          * make sure we don't insert a duplicate uidinfo.
1264          */
1265         if ((uip = uilookup(uid)) == NULL) {
1266                 LIST_INSERT_HEAD(UIHASH(uid), new_uip, ui_hash);
1267                 rw_wunlock(&uihashtbl_lock);
1268                 uip = new_uip;
1269         } else {
1270                 rw_wunlock(&uihashtbl_lock);
1271                 racct_destroy(&new_uip->ui_racct);
1272                 mtx_destroy(&new_uip->ui_vmsize_mtx);
1273                 free(new_uip, M_UIDINFO);
1274         }
1275         return (uip);
1276 }
1277
1278 /*
1279  * Place another refcount on a uidinfo struct.
1280  */
1281 void
1282 uihold(struct uidinfo *uip)
1283 {
1284
1285         refcount_acquire(&uip->ui_ref);
1286 }
1287
1288 /*-
1289  * Since uidinfo structs have a long lifetime, we use an
1290  * opportunistic refcounting scheme to avoid locking the lookup hash
1291  * for each release.
1292  *
1293  * If the refcount hits 0, we need to free the structure,
1294  * which means we need to lock the hash.
1295  * Optimal case:
1296  *   After locking the struct and lowering the refcount, if we find
1297  *   that we don't need to free, simply unlock and return.
1298  * Suboptimal case:
1299  *   If refcount lowering results in need to free, bump the count
1300  *   back up, lose the lock and acquire the locks in the proper
1301  *   order to try again.
1302  */
1303 void
1304 uifree(struct uidinfo *uip)
1305 {
1306         int old;
1307
1308         /* Prepare for optimal case. */
1309         old = uip->ui_ref;
1310         if (old > 1 && atomic_cmpset_int(&uip->ui_ref, old, old - 1))
1311                 return;
1312
1313         /* Prepare for suboptimal case. */
1314         rw_wlock(&uihashtbl_lock);
1315         if (refcount_release(&uip->ui_ref) == 0) {
1316                 rw_wunlock(&uihashtbl_lock);
1317                 return;
1318         }
1319
1320         racct_destroy(&uip->ui_racct);
1321         LIST_REMOVE(uip, ui_hash);
1322         rw_wunlock(&uihashtbl_lock);
1323
1324         if (uip->ui_sbsize != 0)
1325                 printf("freeing uidinfo: uid = %d, sbsize = %ld\n",
1326                     uip->ui_uid, uip->ui_sbsize);
1327         if (uip->ui_proccnt != 0)
1328                 printf("freeing uidinfo: uid = %d, proccnt = %ld\n",
1329                     uip->ui_uid, uip->ui_proccnt);
1330         if (uip->ui_vmsize != 0)
1331                 printf("freeing uidinfo: uid = %d, swapuse = %lld\n",
1332                     uip->ui_uid, (unsigned long long)uip->ui_vmsize);
1333         mtx_destroy(&uip->ui_vmsize_mtx);
1334         free(uip, M_UIDINFO);
1335 }
1336
1337 #ifdef RACCT
1338 void
1339 ui_racct_foreach(void (*callback)(struct racct *racct,
1340     void *arg2, void *arg3), void *arg2, void *arg3)
1341 {
1342         struct uidinfo *uip;
1343         struct uihashhead *uih;
1344
1345         rw_rlock(&uihashtbl_lock);
1346         for (uih = &uihashtbl[uihash]; uih >= uihashtbl; uih--) {
1347                 LIST_FOREACH(uip, uih, ui_hash) {
1348                         (callback)(uip->ui_racct, arg2, arg3);
1349                 }
1350         }
1351         rw_runlock(&uihashtbl_lock);
1352 }
1353 #endif
1354
1355 /*
1356  * Change the count associated with number of processes
1357  * a given user is using.  When 'max' is 0, don't enforce a limit
1358  */
1359 int
1360 chgproccnt(struct uidinfo *uip, int diff, rlim_t max)
1361 {
1362
1363         /* Don't allow them to exceed max, but allow subtraction. */
1364         if (diff > 0 && max != 0) {
1365                 if (atomic_fetchadd_long(&uip->ui_proccnt, (long)diff) + diff > max) {
1366                         atomic_subtract_long(&uip->ui_proccnt, (long)diff);
1367                         return (0);
1368                 }
1369         } else {
1370                 atomic_add_long(&uip->ui_proccnt, (long)diff);
1371                 if (uip->ui_proccnt < 0)
1372                         printf("negative proccnt for uid = %d\n", uip->ui_uid);
1373         }
1374         return (1);
1375 }
1376
1377 /*
1378  * Change the total socket buffer size a user has used.
1379  */
1380 int
1381 chgsbsize(struct uidinfo *uip, u_int *hiwat, u_int to, rlim_t max)
1382 {
1383         int diff;
1384
1385         diff = to - *hiwat;
1386         if (diff > 0) {
1387                 if (atomic_fetchadd_long(&uip->ui_sbsize, (long)diff) + diff > max) {
1388                         atomic_subtract_long(&uip->ui_sbsize, (long)diff);
1389                         return (0);
1390                 }
1391         } else {
1392                 atomic_add_long(&uip->ui_sbsize, (long)diff);
1393                 if (uip->ui_sbsize < 0)
1394                         printf("negative sbsize for uid = %d\n", uip->ui_uid);
1395         }
1396         *hiwat = to;
1397         return (1);
1398 }
1399
1400 /*
1401  * Change the count associated with number of pseudo-terminals
1402  * a given user is using.  When 'max' is 0, don't enforce a limit
1403  */
1404 int
1405 chgptscnt(struct uidinfo *uip, int diff, rlim_t max)
1406 {
1407
1408         /* Don't allow them to exceed max, but allow subtraction. */
1409         if (diff > 0 && max != 0) {
1410                 if (atomic_fetchadd_long(&uip->ui_ptscnt, (long)diff) + diff > max) {
1411                         atomic_subtract_long(&uip->ui_ptscnt, (long)diff);
1412                         return (0);
1413                 }
1414         } else {
1415                 atomic_add_long(&uip->ui_ptscnt, (long)diff);
1416                 if (uip->ui_ptscnt < 0)
1417                         printf("negative ptscnt for uid = %d\n", uip->ui_uid);
1418         }
1419         return (1);
1420 }
1421
1422 int
1423 chgkqcnt(struct uidinfo *uip, int diff, rlim_t max)
1424 {
1425
1426         if (diff > 0 && max != 0) {
1427                 if (atomic_fetchadd_long(&uip->ui_kqcnt, (long)diff) +
1428                     diff > max) {
1429                         atomic_subtract_long(&uip->ui_kqcnt, (long)diff);
1430                         return (0);
1431                 }
1432         } else {
1433                 atomic_add_long(&uip->ui_kqcnt, (long)diff);
1434                 if (uip->ui_kqcnt < 0)
1435                         printf("negative kqcnt for uid = %d\n", uip->ui_uid);
1436         }
1437         return (1);
1438 }