]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/kern/kern_resource.c
Migrate the 802.11s locks out into ieee80211_freebsd.h, so they can be
[FreeBSD/FreeBSD.git] / sys / kern / kern_resource.c
1 /*-
2  * Copyright (c) 1982, 1986, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)kern_resource.c     8.5 (Berkeley) 1/21/94
35  */
36
37 #include <sys/cdefs.h>
38 __FBSDID("$FreeBSD$");
39
40 #include "opt_compat.h"
41
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/sysproto.h>
45 #include <sys/file.h>
46 #include <sys/kernel.h>
47 #include <sys/lock.h>
48 #include <sys/malloc.h>
49 #include <sys/mutex.h>
50 #include <sys/priv.h>
51 #include <sys/proc.h>
52 #include <sys/refcount.h>
53 #include <sys/racct.h>
54 #include <sys/resourcevar.h>
55 #include <sys/rwlock.h>
56 #include <sys/sched.h>
57 #include <sys/sx.h>
58 #include <sys/syscallsubr.h>
59 #include <sys/sysctl.h>
60 #include <sys/sysent.h>
61 #include <sys/time.h>
62 #include <sys/umtx.h>
63
64 #include <vm/vm.h>
65 #include <vm/vm_param.h>
66 #include <vm/pmap.h>
67 #include <vm/vm_map.h>
68
69
70 static MALLOC_DEFINE(M_PLIMIT, "plimit", "plimit structures");
71 static MALLOC_DEFINE(M_UIDINFO, "uidinfo", "uidinfo structures");
72 #define UIHASH(uid)     (&uihashtbl[(uid) & uihash])
73 static struct rwlock uihashtbl_lock;
74 static LIST_HEAD(uihashhead, uidinfo) *uihashtbl;
75 static u_long uihash;           /* size of hash table - 1 */
76
77 static void     calcru1(struct proc *p, struct rusage_ext *ruxp,
78                     struct timeval *up, struct timeval *sp);
79 static int      donice(struct thread *td, struct proc *chgp, int n);
80 static struct uidinfo *uilookup(uid_t uid);
81 static void     ruxagg_locked(struct rusage_ext *rux, struct thread *td);
82
83 static __inline int     lim_shared(struct plimit *limp);
84
85 /*
86  * Resource controls and accounting.
87  */
88 #ifndef _SYS_SYSPROTO_H_
89 struct getpriority_args {
90         int     which;
91         int     who;
92 };
93 #endif
94 int
95 sys_getpriority(struct thread *td, register struct getpriority_args *uap)
96 {
97         struct proc *p;
98         struct pgrp *pg;
99         int error, low;
100
101         error = 0;
102         low = PRIO_MAX + 1;
103         switch (uap->which) {
104
105         case PRIO_PROCESS:
106                 if (uap->who == 0)
107                         low = td->td_proc->p_nice;
108                 else {
109                         p = pfind(uap->who);
110                         if (p == NULL)
111                                 break;
112                         if (p_cansee(td, p) == 0)
113                                 low = p->p_nice;
114                         PROC_UNLOCK(p);
115                 }
116                 break;
117
118         case PRIO_PGRP:
119                 sx_slock(&proctree_lock);
120                 if (uap->who == 0) {
121                         pg = td->td_proc->p_pgrp;
122                         PGRP_LOCK(pg);
123                 } else {
124                         pg = pgfind(uap->who);
125                         if (pg == NULL) {
126                                 sx_sunlock(&proctree_lock);
127                                 break;
128                         }
129                 }
130                 sx_sunlock(&proctree_lock);
131                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
132                         PROC_LOCK(p);
133                         if (p->p_state == PRS_NORMAL &&
134                             p_cansee(td, p) == 0) {
135                                 if (p->p_nice < low)
136                                         low = p->p_nice;
137                         }
138                         PROC_UNLOCK(p);
139                 }
140                 PGRP_UNLOCK(pg);
141                 break;
142
143         case PRIO_USER:
144                 if (uap->who == 0)
145                         uap->who = td->td_ucred->cr_uid;
146                 sx_slock(&allproc_lock);
147                 FOREACH_PROC_IN_SYSTEM(p) {
148                         PROC_LOCK(p);
149                         if (p->p_state == PRS_NORMAL &&
150                             p_cansee(td, p) == 0 &&
151                             p->p_ucred->cr_uid == uap->who) {
152                                 if (p->p_nice < low)
153                                         low = p->p_nice;
154                         }
155                         PROC_UNLOCK(p);
156                 }
157                 sx_sunlock(&allproc_lock);
158                 break;
159
160         default:
161                 error = EINVAL;
162                 break;
163         }
164         if (low == PRIO_MAX + 1 && error == 0)
165                 error = ESRCH;
166         td->td_retval[0] = low;
167         return (error);
168 }
169
170 #ifndef _SYS_SYSPROTO_H_
171 struct setpriority_args {
172         int     which;
173         int     who;
174         int     prio;
175 };
176 #endif
177 int
178 sys_setpriority(struct thread *td, struct setpriority_args *uap)
179 {
180         struct proc *curp, *p;
181         struct pgrp *pg;
182         int found = 0, error = 0;
183
184         curp = td->td_proc;
185         switch (uap->which) {
186         case PRIO_PROCESS:
187                 if (uap->who == 0) {
188                         PROC_LOCK(curp);
189                         error = donice(td, curp, uap->prio);
190                         PROC_UNLOCK(curp);
191                 } else {
192                         p = pfind(uap->who);
193                         if (p == NULL)
194                                 break;
195                         error = p_cansee(td, p);
196                         if (error == 0)
197                                 error = donice(td, p, uap->prio);
198                         PROC_UNLOCK(p);
199                 }
200                 found++;
201                 break;
202
203         case PRIO_PGRP:
204                 sx_slock(&proctree_lock);
205                 if (uap->who == 0) {
206                         pg = curp->p_pgrp;
207                         PGRP_LOCK(pg);
208                 } else {
209                         pg = pgfind(uap->who);
210                         if (pg == NULL) {
211                                 sx_sunlock(&proctree_lock);
212                                 break;
213                         }
214                 }
215                 sx_sunlock(&proctree_lock);
216                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
217                         PROC_LOCK(p);
218                         if (p->p_state == PRS_NORMAL &&
219                             p_cansee(td, p) == 0) {
220                                 error = donice(td, p, uap->prio);
221                                 found++;
222                         }
223                         PROC_UNLOCK(p);
224                 }
225                 PGRP_UNLOCK(pg);
226                 break;
227
228         case PRIO_USER:
229                 if (uap->who == 0)
230                         uap->who = td->td_ucred->cr_uid;
231                 sx_slock(&allproc_lock);
232                 FOREACH_PROC_IN_SYSTEM(p) {
233                         PROC_LOCK(p);
234                         if (p->p_state == PRS_NORMAL &&
235                             p->p_ucred->cr_uid == uap->who &&
236                             p_cansee(td, p) == 0) {
237                                 error = donice(td, p, uap->prio);
238                                 found++;
239                         }
240                         PROC_UNLOCK(p);
241                 }
242                 sx_sunlock(&allproc_lock);
243                 break;
244
245         default:
246                 error = EINVAL;
247                 break;
248         }
249         if (found == 0 && error == 0)
250                 error = ESRCH;
251         return (error);
252 }
253
254 /*
255  * Set "nice" for a (whole) process.
256  */
257 static int
258 donice(struct thread *td, struct proc *p, int n)
259 {
260         int error;
261
262         PROC_LOCK_ASSERT(p, MA_OWNED);
263         if ((error = p_cansched(td, p)))
264                 return (error);
265         if (n > PRIO_MAX)
266                 n = PRIO_MAX;
267         if (n < PRIO_MIN)
268                 n = PRIO_MIN;
269         if (n < p->p_nice && priv_check(td, PRIV_SCHED_SETPRIORITY) != 0)
270                 return (EACCES);
271         sched_nice(p, n);
272         return (0);
273 }
274
275 static int unprivileged_idprio;
276 SYSCTL_INT(_security_bsd, OID_AUTO, unprivileged_idprio, CTLFLAG_RW,
277     &unprivileged_idprio, 0, "Allow non-root users to set an idle priority");
278
279 /*
280  * Set realtime priority for LWP.
281  */
282 #ifndef _SYS_SYSPROTO_H_
283 struct rtprio_thread_args {
284         int             function;
285         lwpid_t         lwpid;
286         struct rtprio   *rtp;
287 };
288 #endif
289 int
290 sys_rtprio_thread(struct thread *td, struct rtprio_thread_args *uap)
291 {
292         struct proc *p;
293         struct rtprio rtp;
294         struct thread *td1;
295         int cierror, error;
296
297         /* Perform copyin before acquiring locks if needed. */
298         if (uap->function == RTP_SET)
299                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
300         else
301                 cierror = 0;
302
303         if (uap->lwpid == 0 || uap->lwpid == td->td_tid) {
304                 p = td->td_proc;
305                 td1 = td;
306                 PROC_LOCK(p);
307         } else {
308                 /* Only look up thread in current process */
309                 td1 = tdfind(uap->lwpid, curproc->p_pid);
310                 if (td1 == NULL)
311                         return (ESRCH);
312                 p = td1->td_proc;
313         }
314
315         switch (uap->function) {
316         case RTP_LOOKUP:
317                 if ((error = p_cansee(td, p)))
318                         break;
319                 pri_to_rtp(td1, &rtp);
320                 PROC_UNLOCK(p);
321                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
322         case RTP_SET:
323                 if ((error = p_cansched(td, p)) || (error = cierror))
324                         break;
325
326                 /* Disallow setting rtprio in most cases if not superuser. */
327
328                 /*
329                  * Realtime priority has to be restricted for reasons which
330                  * should be obvious.  However, for idleprio processes, there is
331                  * a potential for system deadlock if an idleprio process gains
332                  * a lock on a resource that other processes need (and the
333                  * idleprio process can't run due to a CPU-bound normal
334                  * process).  Fix me!  XXX
335                  *
336                  * This problem is not only related to idleprio process.
337                  * A user level program can obtain a file lock and hold it
338                  * indefinitely.  Additionally, without idleprio processes it is
339                  * still conceivable that a program with low priority will never
340                  * get to run.  In short, allowing this feature might make it
341                  * easier to lock a resource indefinitely, but it is not the
342                  * only thing that makes it possible.
343                  */
344                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
345                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
346                     unprivileged_idprio == 0)) {
347                         error = priv_check(td, PRIV_SCHED_RTPRIO);
348                         if (error)
349                                 break;
350                 }
351                 error = rtp_to_pri(&rtp, td1);
352                 break;
353         default:
354                 error = EINVAL;
355                 break;
356         }
357         PROC_UNLOCK(p);
358         return (error);
359 }
360
361 /*
362  * Set realtime priority.
363  */
364 #ifndef _SYS_SYSPROTO_H_
365 struct rtprio_args {
366         int             function;
367         pid_t           pid;
368         struct rtprio   *rtp;
369 };
370 #endif
371 int
372 sys_rtprio(struct thread *td, register struct rtprio_args *uap)
373 {
374         struct proc *p;
375         struct thread *tdp;
376         struct rtprio rtp;
377         int cierror, error;
378
379         /* Perform copyin before acquiring locks if needed. */
380         if (uap->function == RTP_SET)
381                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
382         else
383                 cierror = 0;
384
385         if (uap->pid == 0) {
386                 p = td->td_proc;
387                 PROC_LOCK(p);
388         } else {
389                 p = pfind(uap->pid);
390                 if (p == NULL)
391                         return (ESRCH);
392         }
393
394         switch (uap->function) {
395         case RTP_LOOKUP:
396                 if ((error = p_cansee(td, p)))
397                         break;
398                 /*
399                  * Return OUR priority if no pid specified,
400                  * or if one is, report the highest priority
401                  * in the process.  There isn't much more you can do as
402                  * there is only room to return a single priority.
403                  * Note: specifying our own pid is not the same
404                  * as leaving it zero.
405                  */
406                 if (uap->pid == 0) {
407                         pri_to_rtp(td, &rtp);
408                 } else {
409                         struct rtprio rtp2;
410
411                         rtp.type = RTP_PRIO_IDLE;
412                         rtp.prio = RTP_PRIO_MAX;
413                         FOREACH_THREAD_IN_PROC(p, tdp) {
414                                 pri_to_rtp(tdp, &rtp2);
415                                 if (rtp2.type <  rtp.type ||
416                                     (rtp2.type == rtp.type &&
417                                     rtp2.prio < rtp.prio)) {
418                                         rtp.type = rtp2.type;
419                                         rtp.prio = rtp2.prio;
420                                 }
421                         }
422                 }
423                 PROC_UNLOCK(p);
424                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
425         case RTP_SET:
426                 if ((error = p_cansched(td, p)) || (error = cierror))
427                         break;
428
429                 /*
430                  * Disallow setting rtprio in most cases if not superuser.
431                  * See the comment in sys_rtprio_thread about idprio
432                  * threads holding a lock.
433                  */
434                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
435                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
436                     !unprivileged_idprio)) {
437                         error = priv_check(td, PRIV_SCHED_RTPRIO);
438                         if (error)
439                                 break;
440                 }
441
442                 /*
443                  * If we are setting our own priority, set just our
444                  * thread but if we are doing another process,
445                  * do all the threads on that process. If we
446                  * specify our own pid we do the latter.
447                  */
448                 if (uap->pid == 0) {
449                         error = rtp_to_pri(&rtp, td);
450                 } else {
451                         FOREACH_THREAD_IN_PROC(p, td) {
452                                 if ((error = rtp_to_pri(&rtp, td)) != 0)
453                                         break;
454                         }
455                 }
456                 break;
457         default:
458                 error = EINVAL;
459                 break;
460         }
461         PROC_UNLOCK(p);
462         return (error);
463 }
464
465 int
466 rtp_to_pri(struct rtprio *rtp, struct thread *td)
467 {
468         u_char  newpri, oldclass, oldpri;
469
470         switch (RTP_PRIO_BASE(rtp->type)) {
471         case RTP_PRIO_REALTIME:
472                 if (rtp->prio > RTP_PRIO_MAX)
473                         return (EINVAL);
474                 newpri = PRI_MIN_REALTIME + rtp->prio;
475                 break;
476         case RTP_PRIO_NORMAL:
477                 if (rtp->prio > (PRI_MAX_TIMESHARE - PRI_MIN_TIMESHARE))
478                         return (EINVAL);
479                 newpri = PRI_MIN_TIMESHARE + rtp->prio;
480                 break;
481         case RTP_PRIO_IDLE:
482                 if (rtp->prio > RTP_PRIO_MAX)
483                         return (EINVAL);
484                 newpri = PRI_MIN_IDLE + rtp->prio;
485                 break;
486         default:
487                 return (EINVAL);
488         }
489
490         thread_lock(td);
491         oldclass = td->td_pri_class;
492         sched_class(td, rtp->type);     /* XXX fix */
493         oldpri = td->td_user_pri;
494         sched_user_prio(td, newpri);
495         if (td->td_user_pri != oldpri && (oldclass != RTP_PRIO_NORMAL ||
496             td->td_pri_class != RTP_PRIO_NORMAL))
497                 sched_prio(td, td->td_user_pri);
498         if (TD_ON_UPILOCK(td) && oldpri != newpri) {
499                 critical_enter();
500                 thread_unlock(td);
501                 umtx_pi_adjust(td, oldpri);
502                 critical_exit();
503         } else
504                 thread_unlock(td);
505         return (0);
506 }
507
508 void
509 pri_to_rtp(struct thread *td, struct rtprio *rtp)
510 {
511
512         thread_lock(td);
513         switch (PRI_BASE(td->td_pri_class)) {
514         case PRI_REALTIME:
515                 rtp->prio = td->td_base_user_pri - PRI_MIN_REALTIME;
516                 break;
517         case PRI_TIMESHARE:
518                 rtp->prio = td->td_base_user_pri - PRI_MIN_TIMESHARE;
519                 break;
520         case PRI_IDLE:
521                 rtp->prio = td->td_base_user_pri - PRI_MIN_IDLE;
522                 break;
523         default:
524                 break;
525         }
526         rtp->type = td->td_pri_class;
527         thread_unlock(td);
528 }
529
530 #if defined(COMPAT_43)
531 #ifndef _SYS_SYSPROTO_H_
532 struct osetrlimit_args {
533         u_int   which;
534         struct  orlimit *rlp;
535 };
536 #endif
537 int
538 osetrlimit(struct thread *td, register struct osetrlimit_args *uap)
539 {
540         struct orlimit olim;
541         struct rlimit lim;
542         int error;
543
544         if ((error = copyin(uap->rlp, &olim, sizeof(struct orlimit))))
545                 return (error);
546         lim.rlim_cur = olim.rlim_cur;
547         lim.rlim_max = olim.rlim_max;
548         error = kern_setrlimit(td, uap->which, &lim);
549         return (error);
550 }
551
552 #ifndef _SYS_SYSPROTO_H_
553 struct ogetrlimit_args {
554         u_int   which;
555         struct  orlimit *rlp;
556 };
557 #endif
558 int
559 ogetrlimit(struct thread *td, register struct ogetrlimit_args *uap)
560 {
561         struct orlimit olim;
562         struct rlimit rl;
563         struct proc *p;
564         int error;
565
566         if (uap->which >= RLIM_NLIMITS)
567                 return (EINVAL);
568         p = td->td_proc;
569         PROC_LOCK(p);
570         lim_rlimit(p, uap->which, &rl);
571         PROC_UNLOCK(p);
572
573         /*
574          * XXX would be more correct to convert only RLIM_INFINITY to the
575          * old RLIM_INFINITY and fail with EOVERFLOW for other larger
576          * values.  Most 64->32 and 32->16 conversions, including not
577          * unimportant ones of uids are even more broken than what we
578          * do here (they blindly truncate).  We don't do this correctly
579          * here since we have little experience with EOVERFLOW yet.
580          * Elsewhere, getuid() can't fail...
581          */
582         olim.rlim_cur = rl.rlim_cur > 0x7fffffff ? 0x7fffffff : rl.rlim_cur;
583         olim.rlim_max = rl.rlim_max > 0x7fffffff ? 0x7fffffff : rl.rlim_max;
584         error = copyout(&olim, uap->rlp, sizeof(olim));
585         return (error);
586 }
587 #endif /* COMPAT_43 */
588
589 #ifndef _SYS_SYSPROTO_H_
590 struct __setrlimit_args {
591         u_int   which;
592         struct  rlimit *rlp;
593 };
594 #endif
595 int
596 sys_setrlimit(struct thread *td, register struct __setrlimit_args *uap)
597 {
598         struct rlimit alim;
599         int error;
600
601         if ((error = copyin(uap->rlp, &alim, sizeof(struct rlimit))))
602                 return (error);
603         error = kern_setrlimit(td, uap->which, &alim);
604         return (error);
605 }
606
607 static void
608 lim_cb(void *arg)
609 {
610         struct rlimit rlim;
611         struct thread *td;
612         struct proc *p;
613
614         p = arg;
615         PROC_LOCK_ASSERT(p, MA_OWNED);
616         /*
617          * Check if the process exceeds its cpu resource allocation.  If
618          * it reaches the max, arrange to kill the process in ast().
619          */
620         if (p->p_cpulimit == RLIM_INFINITY)
621                 return;
622         PROC_STATLOCK(p);
623         FOREACH_THREAD_IN_PROC(p, td) {
624                 ruxagg(p, td);
625         }
626         PROC_STATUNLOCK(p);
627         if (p->p_rux.rux_runtime > p->p_cpulimit * cpu_tickrate()) {
628                 lim_rlimit(p, RLIMIT_CPU, &rlim);
629                 if (p->p_rux.rux_runtime >= rlim.rlim_max * cpu_tickrate()) {
630                         killproc(p, "exceeded maximum CPU limit");
631                 } else {
632                         if (p->p_cpulimit < rlim.rlim_max)
633                                 p->p_cpulimit += 5;
634                         kern_psignal(p, SIGXCPU);
635                 }
636         }
637         if ((p->p_flag & P_WEXIT) == 0)
638                 callout_reset_sbt(&p->p_limco, SBT_1S, 0,
639                     lim_cb, p, C_PREL(1));
640 }
641
642 int
643 kern_setrlimit(struct thread *td, u_int which, struct rlimit *limp)
644 {
645
646         return (kern_proc_setrlimit(td, td->td_proc, which, limp));
647 }
648
649 int
650 kern_proc_setrlimit(struct thread *td, struct proc *p, u_int which,
651     struct rlimit *limp)
652 {
653         struct plimit *newlim, *oldlim;
654         register struct rlimit *alimp;
655         struct rlimit oldssiz;
656         int error;
657
658         if (which >= RLIM_NLIMITS)
659                 return (EINVAL);
660
661         /*
662          * Preserve historical bugs by treating negative limits as unsigned.
663          */
664         if (limp->rlim_cur < 0)
665                 limp->rlim_cur = RLIM_INFINITY;
666         if (limp->rlim_max < 0)
667                 limp->rlim_max = RLIM_INFINITY;
668
669         oldssiz.rlim_cur = 0;
670         newlim = NULL;
671         PROC_LOCK(p);
672         if (lim_shared(p->p_limit)) {
673                 PROC_UNLOCK(p);
674                 newlim = lim_alloc();
675                 PROC_LOCK(p);
676         }
677         oldlim = p->p_limit;
678         alimp = &oldlim->pl_rlimit[which];
679         if (limp->rlim_cur > alimp->rlim_max ||
680             limp->rlim_max > alimp->rlim_max)
681                 if ((error = priv_check(td, PRIV_PROC_SETRLIMIT))) {
682                         PROC_UNLOCK(p);
683                         if (newlim != NULL)
684                                 lim_free(newlim);
685                         return (error);
686                 }
687         if (limp->rlim_cur > limp->rlim_max)
688                 limp->rlim_cur = limp->rlim_max;
689         if (newlim != NULL) {
690                 lim_copy(newlim, oldlim);
691                 alimp = &newlim->pl_rlimit[which];
692         }
693
694         switch (which) {
695
696         case RLIMIT_CPU:
697                 if (limp->rlim_cur != RLIM_INFINITY &&
698                     p->p_cpulimit == RLIM_INFINITY)
699                         callout_reset_sbt(&p->p_limco, SBT_1S, 0,
700                             lim_cb, p, C_PREL(1));
701                 p->p_cpulimit = limp->rlim_cur;
702                 break;
703         case RLIMIT_DATA:
704                 if (limp->rlim_cur > maxdsiz)
705                         limp->rlim_cur = maxdsiz;
706                 if (limp->rlim_max > maxdsiz)
707                         limp->rlim_max = maxdsiz;
708                 break;
709
710         case RLIMIT_STACK:
711                 if (limp->rlim_cur > maxssiz)
712                         limp->rlim_cur = maxssiz;
713                 if (limp->rlim_max > maxssiz)
714                         limp->rlim_max = maxssiz;
715                 oldssiz = *alimp;
716                 if (p->p_sysent->sv_fixlimit != NULL)
717                         p->p_sysent->sv_fixlimit(&oldssiz,
718                             RLIMIT_STACK);
719                 break;
720
721         case RLIMIT_NOFILE:
722                 if (limp->rlim_cur > maxfilesperproc)
723                         limp->rlim_cur = maxfilesperproc;
724                 if (limp->rlim_max > maxfilesperproc)
725                         limp->rlim_max = maxfilesperproc;
726                 break;
727
728         case RLIMIT_NPROC:
729                 if (limp->rlim_cur > maxprocperuid)
730                         limp->rlim_cur = maxprocperuid;
731                 if (limp->rlim_max > maxprocperuid)
732                         limp->rlim_max = maxprocperuid;
733                 if (limp->rlim_cur < 1)
734                         limp->rlim_cur = 1;
735                 if (limp->rlim_max < 1)
736                         limp->rlim_max = 1;
737                 break;
738         }
739         if (p->p_sysent->sv_fixlimit != NULL)
740                 p->p_sysent->sv_fixlimit(limp, which);
741         *alimp = *limp;
742         if (newlim != NULL)
743                 p->p_limit = newlim;
744         PROC_UNLOCK(p);
745         if (newlim != NULL)
746                 lim_free(oldlim);
747
748         if (which == RLIMIT_STACK &&
749             /*
750              * Skip calls from exec_new_vmspace(), done when stack is
751              * not mapped yet.
752              */
753             (td != curthread || (p->p_flag & P_INEXEC) == 0)) {
754                 /*
755                  * Stack is allocated to the max at exec time with only
756                  * "rlim_cur" bytes accessible.  If stack limit is going
757                  * up make more accessible, if going down make inaccessible.
758                  */
759                 if (limp->rlim_cur != oldssiz.rlim_cur) {
760                         vm_offset_t addr;
761                         vm_size_t size;
762                         vm_prot_t prot;
763
764                         if (limp->rlim_cur > oldssiz.rlim_cur) {
765                                 prot = p->p_sysent->sv_stackprot;
766                                 size = limp->rlim_cur - oldssiz.rlim_cur;
767                                 addr = p->p_sysent->sv_usrstack -
768                                     limp->rlim_cur;
769                         } else {
770                                 prot = VM_PROT_NONE;
771                                 size = oldssiz.rlim_cur - limp->rlim_cur;
772                                 addr = p->p_sysent->sv_usrstack -
773                                     oldssiz.rlim_cur;
774                         }
775                         addr = trunc_page(addr);
776                         size = round_page(size);
777                         (void)vm_map_protect(&p->p_vmspace->vm_map,
778                             addr, addr + size, prot, FALSE);
779                 }
780         }
781
782         return (0);
783 }
784
785 #ifndef _SYS_SYSPROTO_H_
786 struct __getrlimit_args {
787         u_int   which;
788         struct  rlimit *rlp;
789 };
790 #endif
791 /* ARGSUSED */
792 int
793 sys_getrlimit(struct thread *td, register struct __getrlimit_args *uap)
794 {
795         struct rlimit rlim;
796         struct proc *p;
797         int error;
798
799         if (uap->which >= RLIM_NLIMITS)
800                 return (EINVAL);
801         p = td->td_proc;
802         PROC_LOCK(p);
803         lim_rlimit(p, uap->which, &rlim);
804         PROC_UNLOCK(p);
805         error = copyout(&rlim, uap->rlp, sizeof(struct rlimit));
806         return (error);
807 }
808
809 /*
810  * Transform the running time and tick information for children of proc p
811  * into user and system time usage.
812  */
813 void
814 calccru(struct proc *p, struct timeval *up, struct timeval *sp)
815 {
816
817         PROC_LOCK_ASSERT(p, MA_OWNED);
818         calcru1(p, &p->p_crux, up, sp);
819 }
820
821 /*
822  * Transform the running time and tick information in proc p into user
823  * and system time usage.  If appropriate, include the current time slice
824  * on this CPU.
825  */
826 void
827 calcru(struct proc *p, struct timeval *up, struct timeval *sp)
828 {
829         struct thread *td;
830         uint64_t runtime, u;
831
832         PROC_LOCK_ASSERT(p, MA_OWNED);
833         PROC_STATLOCK_ASSERT(p, MA_OWNED);
834         /*
835          * If we are getting stats for the current process, then add in the
836          * stats that this thread has accumulated in its current time slice.
837          * We reset the thread and CPU state as if we had performed a context
838          * switch right here.
839          */
840         td = curthread;
841         if (td->td_proc == p) {
842                 u = cpu_ticks();
843                 runtime = u - PCPU_GET(switchtime);
844                 td->td_runtime += runtime;
845                 td->td_incruntime += runtime;
846                 PCPU_SET(switchtime, u);
847         }
848         /* Make sure the per-thread stats are current. */
849         FOREACH_THREAD_IN_PROC(p, td) {
850                 if (td->td_incruntime == 0)
851                         continue;
852                 ruxagg(p, td);
853         }
854         calcru1(p, &p->p_rux, up, sp);
855 }
856
857 /* Collect resource usage for a single thread. */
858 void
859 rufetchtd(struct thread *td, struct rusage *ru)
860 {
861         struct proc *p;
862         uint64_t runtime, u;
863
864         p = td->td_proc;
865         PROC_STATLOCK_ASSERT(p, MA_OWNED);
866         THREAD_LOCK_ASSERT(td, MA_OWNED);
867         /*
868          * If we are getting stats for the current thread, then add in the
869          * stats that this thread has accumulated in its current time slice.
870          * We reset the thread and CPU state as if we had performed a context
871          * switch right here.
872          */
873         if (td == curthread) {
874                 u = cpu_ticks();
875                 runtime = u - PCPU_GET(switchtime);
876                 td->td_runtime += runtime;
877                 td->td_incruntime += runtime;
878                 PCPU_SET(switchtime, u);
879         }
880         ruxagg(p, td);
881         *ru = td->td_ru;
882         calcru1(p, &td->td_rux, &ru->ru_utime, &ru->ru_stime);
883 }
884
885 static void
886 calcru1(struct proc *p, struct rusage_ext *ruxp, struct timeval *up,
887     struct timeval *sp)
888 {
889         /* {user, system, interrupt, total} {ticks, usec}: */
890         uint64_t ut, uu, st, su, it, tt, tu;
891
892         ut = ruxp->rux_uticks;
893         st = ruxp->rux_sticks;
894         it = ruxp->rux_iticks;
895         tt = ut + st + it;
896         if (tt == 0) {
897                 /* Avoid divide by zero */
898                 st = 1;
899                 tt = 1;
900         }
901         tu = cputick2usec(ruxp->rux_runtime);
902         if ((int64_t)tu < 0) {
903                 /* XXX: this should be an assert /phk */
904                 printf("calcru: negative runtime of %jd usec for pid %d (%s)\n",
905                     (intmax_t)tu, p->p_pid, p->p_comm);
906                 tu = ruxp->rux_tu;
907         }
908
909         if (tu >= ruxp->rux_tu) {
910                 /*
911                  * The normal case, time increased.
912                  * Enforce monotonicity of bucketed numbers.
913                  */
914                 uu = (tu * ut) / tt;
915                 if (uu < ruxp->rux_uu)
916                         uu = ruxp->rux_uu;
917                 su = (tu * st) / tt;
918                 if (su < ruxp->rux_su)
919                         su = ruxp->rux_su;
920         } else if (tu + 3 > ruxp->rux_tu || 101 * tu > 100 * ruxp->rux_tu) {
921                 /*
922                  * When we calibrate the cputicker, it is not uncommon to
923                  * see the presumably fixed frequency increase slightly over
924                  * time as a result of thermal stabilization and NTP
925                  * discipline (of the reference clock).  We therefore ignore
926                  * a bit of backwards slop because we  expect to catch up
927                  * shortly.  We use a 3 microsecond limit to catch low
928                  * counts and a 1% limit for high counts.
929                  */
930                 uu = ruxp->rux_uu;
931                 su = ruxp->rux_su;
932                 tu = ruxp->rux_tu;
933         } else { /* tu < ruxp->rux_tu */
934                 /*
935                  * What happened here was likely that a laptop, which ran at
936                  * a reduced clock frequency at boot, kicked into high gear.
937                  * The wisdom of spamming this message in that case is
938                  * dubious, but it might also be indicative of something
939                  * serious, so lets keep it and hope laptops can be made
940                  * more truthful about their CPU speed via ACPI.
941                  */
942                 printf("calcru: runtime went backwards from %ju usec "
943                     "to %ju usec for pid %d (%s)\n",
944                     (uintmax_t)ruxp->rux_tu, (uintmax_t)tu,
945                     p->p_pid, p->p_comm);
946                 uu = (tu * ut) / tt;
947                 su = (tu * st) / tt;
948         }
949
950         ruxp->rux_uu = uu;
951         ruxp->rux_su = su;
952         ruxp->rux_tu = tu;
953
954         up->tv_sec = uu / 1000000;
955         up->tv_usec = uu % 1000000;
956         sp->tv_sec = su / 1000000;
957         sp->tv_usec = su % 1000000;
958 }
959
960 #ifndef _SYS_SYSPROTO_H_
961 struct getrusage_args {
962         int     who;
963         struct  rusage *rusage;
964 };
965 #endif
966 int
967 sys_getrusage(register struct thread *td, register struct getrusage_args *uap)
968 {
969         struct rusage ru;
970         int error;
971
972         error = kern_getrusage(td, uap->who, &ru);
973         if (error == 0)
974                 error = copyout(&ru, uap->rusage, sizeof(struct rusage));
975         return (error);
976 }
977
978 int
979 kern_getrusage(struct thread *td, int who, struct rusage *rup)
980 {
981         struct proc *p;
982         int error;
983
984         error = 0;
985         p = td->td_proc;
986         PROC_LOCK(p);
987         switch (who) {
988         case RUSAGE_SELF:
989                 rufetchcalc(p, rup, &rup->ru_utime,
990                     &rup->ru_stime);
991                 break;
992
993         case RUSAGE_CHILDREN:
994                 *rup = p->p_stats->p_cru;
995                 calccru(p, &rup->ru_utime, &rup->ru_stime);
996                 break;
997
998         case RUSAGE_THREAD:
999                 PROC_STATLOCK(p);
1000                 thread_lock(td);
1001                 rufetchtd(td, rup);
1002                 thread_unlock(td);
1003                 PROC_STATUNLOCK(p);
1004                 break;
1005
1006         default:
1007                 error = EINVAL;
1008         }
1009         PROC_UNLOCK(p);
1010         return (error);
1011 }
1012
1013 void
1014 rucollect(struct rusage *ru, struct rusage *ru2)
1015 {
1016         long *ip, *ip2;
1017         int i;
1018
1019         if (ru->ru_maxrss < ru2->ru_maxrss)
1020                 ru->ru_maxrss = ru2->ru_maxrss;
1021         ip = &ru->ru_first;
1022         ip2 = &ru2->ru_first;
1023         for (i = &ru->ru_last - &ru->ru_first; i >= 0; i--)
1024                 *ip++ += *ip2++;
1025 }
1026
1027 void
1028 ruadd(struct rusage *ru, struct rusage_ext *rux, struct rusage *ru2,
1029     struct rusage_ext *rux2)
1030 {
1031
1032         rux->rux_runtime += rux2->rux_runtime;
1033         rux->rux_uticks += rux2->rux_uticks;
1034         rux->rux_sticks += rux2->rux_sticks;
1035         rux->rux_iticks += rux2->rux_iticks;
1036         rux->rux_uu += rux2->rux_uu;
1037         rux->rux_su += rux2->rux_su;
1038         rux->rux_tu += rux2->rux_tu;
1039         rucollect(ru, ru2);
1040 }
1041
1042 /*
1043  * Aggregate tick counts into the proc's rusage_ext.
1044  */
1045 static void
1046 ruxagg_locked(struct rusage_ext *rux, struct thread *td)
1047 {
1048
1049         THREAD_LOCK_ASSERT(td, MA_OWNED);
1050         PROC_STATLOCK_ASSERT(td->td_proc, MA_OWNED);
1051         rux->rux_runtime += td->td_incruntime;
1052         rux->rux_uticks += td->td_uticks;
1053         rux->rux_sticks += td->td_sticks;
1054         rux->rux_iticks += td->td_iticks;
1055 }
1056
1057 void
1058 ruxagg(struct proc *p, struct thread *td)
1059 {
1060
1061         thread_lock(td);
1062         ruxagg_locked(&p->p_rux, td);
1063         ruxagg_locked(&td->td_rux, td);
1064         td->td_incruntime = 0;
1065         td->td_uticks = 0;
1066         td->td_iticks = 0;
1067         td->td_sticks = 0;
1068         thread_unlock(td);
1069 }
1070
1071 /*
1072  * Update the rusage_ext structure and fetch a valid aggregate rusage
1073  * for proc p if storage for one is supplied.
1074  */
1075 void
1076 rufetch(struct proc *p, struct rusage *ru)
1077 {
1078         struct thread *td;
1079
1080         PROC_STATLOCK_ASSERT(p, MA_OWNED);
1081
1082         *ru = p->p_ru;
1083         if (p->p_numthreads > 0)  {
1084                 FOREACH_THREAD_IN_PROC(p, td) {
1085                         ruxagg(p, td);
1086                         rucollect(ru, &td->td_ru);
1087                 }
1088         }
1089 }
1090
1091 /*
1092  * Atomically perform a rufetch and a calcru together.
1093  * Consumers, can safely assume the calcru is executed only once
1094  * rufetch is completed.
1095  */
1096 void
1097 rufetchcalc(struct proc *p, struct rusage *ru, struct timeval *up,
1098     struct timeval *sp)
1099 {
1100
1101         PROC_STATLOCK(p);
1102         rufetch(p, ru);
1103         calcru(p, up, sp);
1104         PROC_STATUNLOCK(p);
1105 }
1106
1107 /*
1108  * Allocate a new resource limits structure and initialize its
1109  * reference count and mutex pointer.
1110  */
1111 struct plimit *
1112 lim_alloc()
1113 {
1114         struct plimit *limp;
1115
1116         limp = malloc(sizeof(struct plimit), M_PLIMIT, M_WAITOK);
1117         refcount_init(&limp->pl_refcnt, 1);
1118         return (limp);
1119 }
1120
1121 struct plimit *
1122 lim_hold(struct plimit *limp)
1123 {
1124
1125         refcount_acquire(&limp->pl_refcnt);
1126         return (limp);
1127 }
1128
1129 static __inline int
1130 lim_shared(struct plimit *limp)
1131 {
1132
1133         return (limp->pl_refcnt > 1);
1134 }
1135
1136 void
1137 lim_fork(struct proc *p1, struct proc *p2)
1138 {
1139
1140         PROC_LOCK_ASSERT(p1, MA_OWNED);
1141         PROC_LOCK_ASSERT(p2, MA_OWNED);
1142
1143         p2->p_limit = lim_hold(p1->p_limit);
1144         callout_init_mtx(&p2->p_limco, &p2->p_mtx, 0);
1145         if (p1->p_cpulimit != RLIM_INFINITY)
1146                 callout_reset_sbt(&p2->p_limco, SBT_1S, 0,
1147                     lim_cb, p2, C_PREL(1));
1148 }
1149
1150 void
1151 lim_free(struct plimit *limp)
1152 {
1153
1154         if (refcount_release(&limp->pl_refcnt))
1155                 free((void *)limp, M_PLIMIT);
1156 }
1157
1158 /*
1159  * Make a copy of the plimit structure.
1160  * We share these structures copy-on-write after fork.
1161  */
1162 void
1163 lim_copy(struct plimit *dst, struct plimit *src)
1164 {
1165
1166         KASSERT(!lim_shared(dst), ("lim_copy to shared limit"));
1167         bcopy(src->pl_rlimit, dst->pl_rlimit, sizeof(src->pl_rlimit));
1168 }
1169
1170 /*
1171  * Return the hard limit for a particular system resource.  The
1172  * which parameter specifies the index into the rlimit array.
1173  */
1174 rlim_t
1175 lim_max(struct proc *p, int which)
1176 {
1177         struct rlimit rl;
1178
1179         lim_rlimit(p, which, &rl);
1180         return (rl.rlim_max);
1181 }
1182
1183 /*
1184  * Return the current (soft) limit for a particular system resource.
1185  * The which parameter which specifies the index into the rlimit array
1186  */
1187 rlim_t
1188 lim_cur(struct proc *p, int which)
1189 {
1190         struct rlimit rl;
1191
1192         lim_rlimit(p, which, &rl);
1193         return (rl.rlim_cur);
1194 }
1195
1196 /*
1197  * Return a copy of the entire rlimit structure for the system limit
1198  * specified by 'which' in the rlimit structure pointed to by 'rlp'.
1199  */
1200 void
1201 lim_rlimit(struct proc *p, int which, struct rlimit *rlp)
1202 {
1203
1204         PROC_LOCK_ASSERT(p, MA_OWNED);
1205         KASSERT(which >= 0 && which < RLIM_NLIMITS,
1206             ("request for invalid resource limit"));
1207         *rlp = p->p_limit->pl_rlimit[which];
1208         if (p->p_sysent->sv_fixlimit != NULL)
1209                 p->p_sysent->sv_fixlimit(rlp, which);
1210 }
1211
1212 void
1213 uihashinit()
1214 {
1215
1216         uihashtbl = hashinit(maxproc / 16, M_UIDINFO, &uihash);
1217         rw_init(&uihashtbl_lock, "uidinfo hash");
1218 }
1219
1220 /*
1221  * Look up a uidinfo struct for the parameter uid.
1222  * uihashtbl_lock must be locked.
1223  * Increase refcount on uidinfo struct returned.
1224  */
1225 static struct uidinfo *
1226 uilookup(uid_t uid)
1227 {
1228         struct uihashhead *uipp;
1229         struct uidinfo *uip;
1230
1231         rw_assert(&uihashtbl_lock, RA_LOCKED);
1232         uipp = UIHASH(uid);
1233         LIST_FOREACH(uip, uipp, ui_hash)
1234                 if (uip->ui_uid == uid) {
1235                         uihold(uip);
1236                         break;
1237                 }
1238
1239         return (uip);
1240 }
1241
1242 /*
1243  * Find or allocate a struct uidinfo for a particular uid.
1244  * Returns with uidinfo struct referenced.
1245  * uifree() should be called on a struct uidinfo when released.
1246  */
1247 struct uidinfo *
1248 uifind(uid_t uid)
1249 {
1250         struct uidinfo *new_uip, *uip;
1251
1252         rw_rlock(&uihashtbl_lock);
1253         uip = uilookup(uid);
1254         rw_runlock(&uihashtbl_lock);
1255         if (uip != NULL)
1256                 return (uip);
1257
1258         new_uip = malloc(sizeof(*new_uip), M_UIDINFO, M_WAITOK | M_ZERO);
1259         racct_create(&new_uip->ui_racct);
1260         refcount_init(&new_uip->ui_ref, 1);
1261         new_uip->ui_uid = uid;
1262         mtx_init(&new_uip->ui_vmsize_mtx, "ui_vmsize", NULL, MTX_DEF);
1263
1264         rw_wlock(&uihashtbl_lock);
1265         /*
1266          * There's a chance someone created our uidinfo while we
1267          * were in malloc and not holding the lock, so we have to
1268          * make sure we don't insert a duplicate uidinfo.
1269          */
1270         if ((uip = uilookup(uid)) == NULL) {
1271                 LIST_INSERT_HEAD(UIHASH(uid), new_uip, ui_hash);
1272                 rw_wunlock(&uihashtbl_lock);
1273                 uip = new_uip;
1274         } else {
1275                 rw_wunlock(&uihashtbl_lock);
1276                 racct_destroy(&new_uip->ui_racct);
1277                 mtx_destroy(&new_uip->ui_vmsize_mtx);
1278                 free(new_uip, M_UIDINFO);
1279         }
1280         return (uip);
1281 }
1282
1283 /*
1284  * Place another refcount on a uidinfo struct.
1285  */
1286 void
1287 uihold(struct uidinfo *uip)
1288 {
1289
1290         refcount_acquire(&uip->ui_ref);
1291 }
1292
1293 /*-
1294  * Since uidinfo structs have a long lifetime, we use an
1295  * opportunistic refcounting scheme to avoid locking the lookup hash
1296  * for each release.
1297  *
1298  * If the refcount hits 0, we need to free the structure,
1299  * which means we need to lock the hash.
1300  * Optimal case:
1301  *   After locking the struct and lowering the refcount, if we find
1302  *   that we don't need to free, simply unlock and return.
1303  * Suboptimal case:
1304  *   If refcount lowering results in need to free, bump the count
1305  *   back up, lose the lock and acquire the locks in the proper
1306  *   order to try again.
1307  */
1308 void
1309 uifree(struct uidinfo *uip)
1310 {
1311         int old;
1312
1313         /* Prepare for optimal case. */
1314         old = uip->ui_ref;
1315         if (old > 1 && atomic_cmpset_int(&uip->ui_ref, old, old - 1))
1316                 return;
1317
1318         /* Prepare for suboptimal case. */
1319         rw_wlock(&uihashtbl_lock);
1320         if (refcount_release(&uip->ui_ref) == 0) {
1321                 rw_wunlock(&uihashtbl_lock);
1322                 return;
1323         }
1324
1325         racct_destroy(&uip->ui_racct);
1326         LIST_REMOVE(uip, ui_hash);
1327         rw_wunlock(&uihashtbl_lock);
1328
1329         if (uip->ui_sbsize != 0)
1330                 printf("freeing uidinfo: uid = %d, sbsize = %ld\n",
1331                     uip->ui_uid, uip->ui_sbsize);
1332         if (uip->ui_proccnt != 0)
1333                 printf("freeing uidinfo: uid = %d, proccnt = %ld\n",
1334                     uip->ui_uid, uip->ui_proccnt);
1335         if (uip->ui_vmsize != 0)
1336                 printf("freeing uidinfo: uid = %d, swapuse = %lld\n",
1337                     uip->ui_uid, (unsigned long long)uip->ui_vmsize);
1338         mtx_destroy(&uip->ui_vmsize_mtx);
1339         free(uip, M_UIDINFO);
1340 }
1341
1342 #ifdef RACCT
1343 void
1344 ui_racct_foreach(void (*callback)(struct racct *racct,
1345     void *arg2, void *arg3), void *arg2, void *arg3)
1346 {
1347         struct uidinfo *uip;
1348         struct uihashhead *uih;
1349
1350         rw_rlock(&uihashtbl_lock);
1351         for (uih = &uihashtbl[uihash]; uih >= uihashtbl; uih--) {
1352                 LIST_FOREACH(uip, uih, ui_hash) {
1353                         (callback)(uip->ui_racct, arg2, arg3);
1354                 }
1355         }
1356         rw_runlock(&uihashtbl_lock);
1357 }
1358 #endif
1359
1360 /*
1361  * Change the count associated with number of processes
1362  * a given user is using.  When 'max' is 0, don't enforce a limit
1363  */
1364 int
1365 chgproccnt(struct uidinfo *uip, int diff, rlim_t max)
1366 {
1367
1368         /* Don't allow them to exceed max, but allow subtraction. */
1369         if (diff > 0 && max != 0) {
1370                 if (atomic_fetchadd_long(&uip->ui_proccnt, (long)diff) + diff > max) {
1371                         atomic_subtract_long(&uip->ui_proccnt, (long)diff);
1372                         return (0);
1373                 }
1374         } else {
1375                 atomic_add_long(&uip->ui_proccnt, (long)diff);
1376                 if (uip->ui_proccnt < 0)
1377                         printf("negative proccnt for uid = %d\n", uip->ui_uid);
1378         }
1379         return (1);
1380 }
1381
1382 /*
1383  * Change the total socket buffer size a user has used.
1384  */
1385 int
1386 chgsbsize(struct uidinfo *uip, u_int *hiwat, u_int to, rlim_t max)
1387 {
1388         int diff;
1389
1390         diff = to - *hiwat;
1391         if (diff > 0) {
1392                 if (atomic_fetchadd_long(&uip->ui_sbsize, (long)diff) + diff > max) {
1393                         atomic_subtract_long(&uip->ui_sbsize, (long)diff);
1394                         return (0);
1395                 }
1396         } else {
1397                 atomic_add_long(&uip->ui_sbsize, (long)diff);
1398                 if (uip->ui_sbsize < 0)
1399                         printf("negative sbsize for uid = %d\n", uip->ui_uid);
1400         }
1401         *hiwat = to;
1402         return (1);
1403 }
1404
1405 /*
1406  * Change the count associated with number of pseudo-terminals
1407  * a given user is using.  When 'max' is 0, don't enforce a limit
1408  */
1409 int
1410 chgptscnt(struct uidinfo *uip, int diff, rlim_t max)
1411 {
1412
1413         /* Don't allow them to exceed max, but allow subtraction. */
1414         if (diff > 0 && max != 0) {
1415                 if (atomic_fetchadd_long(&uip->ui_ptscnt, (long)diff) + diff > max) {
1416                         atomic_subtract_long(&uip->ui_ptscnt, (long)diff);
1417                         return (0);
1418                 }
1419         } else {
1420                 atomic_add_long(&uip->ui_ptscnt, (long)diff);
1421                 if (uip->ui_ptscnt < 0)
1422                         printf("negative ptscnt for uid = %d\n", uip->ui_uid);
1423         }
1424         return (1);
1425 }
1426
1427 int
1428 chgkqcnt(struct uidinfo *uip, int diff, rlim_t max)
1429 {
1430
1431         if (diff > 0 && max != 0) {
1432                 if (atomic_fetchadd_long(&uip->ui_kqcnt, (long)diff) +
1433                     diff > max) {
1434                         atomic_subtract_long(&uip->ui_kqcnt, (long)diff);
1435                         return (0);
1436                 }
1437         } else {
1438                 atomic_add_long(&uip->ui_kqcnt, (long)diff);
1439                 if (uip->ui_kqcnt < 0)
1440                         printf("negative kqcnt for uid = %d\n", uip->ui_uid);
1441         }
1442         return (1);
1443 }