2 # Specific board setup for the Atheros AP91 reference board.
4 # The AP91 has the following hardware:
8 # + Integrated switch (XXX speed?)
21 options AR71XX_REALMEM=16*1024*1024
23 options AR71XX_ENV_UBOOT
26 makeoptions INLINE_LIMIT=768
28 # We bite the performance overhead for now; the kernel won't
29 # fit if the mutexes are inlined.
30 options MUTEX_NOINLINE
31 options RWLOCK_NOINLINE
34 # There's no need to enable swapping on this platform.
37 # For DOS - enable if required
40 # uncompress - to boot read-only lzma natively from flash
43 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
45 # Not enough space for these..
47 nooptions INVARIANT_SUPPORT
49 nooptions WITNESS_SKIPSPIN
50 nooptions DEBUG_REDZONE
51 nooptions DEBUG_MEMGUARD
53 # Used for the static uboot partition map
56 # Options needed for the EEPROM based calibration/PCI configuration data.
57 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
58 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
59 device firmware # Used by the above
61 # Options required for miiproxy and mdiobus
62 options ARGE_MDIO # Export an MDIO bus separate from arge
63 device miiproxy # MDIO bus <-> MII PHY rendezvous