2 # Specific board setup for the Atheros AP91 reference board.
4 # The AP93 has the following hardware:
8 # + Integrated switch (XXX speed?)
19 options AR71XX_REALMEM=64*1024*1024
21 options AR71XX_ENV_UBOOT
23 # For DOS - enable if required
26 # uncompress - to boot read-only lzma natively from flash
27 device geom_uncompress
28 options GEOM_UNCOMPRESS
29 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
31 # Used for the static uboot partition map
34 # Options needed for the EEPROM based calibration/PCI configuration data.
35 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
36 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
37 device firmware # Used by the above
39 # Options required for miiproxy and mdiobus
40 options ARGE_MDIO # Export an MDIO bus separate from arge
41 device miiproxy # MDIO bus <-> MII PHY rendezvous