3 # Specific board setup for the D-Link DIR-825C1 router.
5 # The DIR-825C1 has the following hardware:
7 # + AR9344 CPU SoC 74k MIPS
10 # + AR8327 Gigabit switch
11 # + m25p80 based 16MB flash
15 # Include the default AR934x parameters
19 # Override hints with board values
20 hints "DIR-825C1.hints"
22 # Force the board memory - the base DB120 has 128MB RAM
23 options AR71XX_REALMEM=(128*1024*1024)
31 # Options required for miiproxy and mdiobus
32 options ARGE_MDIO # Export an MDIO bus separate from arge
33 device miiproxy # MDIO bus <-> MII PHY rendezvous
38 # read MSDOS formatted disks - USB
41 # Enable the uboot environment stuff rather then the
43 options AR71XX_ENV_UBOOT
45 # Used for the static uboot partition map
48 # uzip - to boot natively from flash
49 options GEOM_UNCOMPRESS
52 # yes, this board has a PCI connected atheros device
54 options AR71XX_ATH_EEPROM
55 device firmware # Used by the above
56 options ATH_EEPROM_FIRMWARE
58 # Boot off of the rootfs, as defined in the geom_map setup.
59 options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
61 # In order to netboot, you have to build the mfsroot into the kernel
62 # 19443712 or 19M is the biggest rootfs via netboot this thing supports
63 #options MD_ROOT # md device usable as a potential root device
64 #options MD_ROOT_SIZE=19444
65 #makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
66 #options ROOTDEVNAME=\"ufs:md0.uncompress\"