3 # Specific board setup for the D-Link DIR-825C1 router.
5 # The DIR-825C1 has the following hardware:
7 # + AR9344 CPU SoC 74k MIPS
10 # + AR8327 Gigabit switch
11 # + m25p80 based 16MB flash
17 # Include the default AR934x parameters
21 # Override hints with board values
22 hints "DIR-825C1.hints"
24 # Force the board memory - the base DB120 has 128MB RAM
25 options AR71XX_REALMEM=(128*1024*1024)
27 # Options required for miiproxy and mdiobus
28 options ARGE_MDIO # Export an MDIO bus separate from arge
29 device miiproxy # MDIO bus <-> MII PHY rendezvous
34 # read MSDOS formatted disks - USB
37 # Enable the uboot environment stuff rather then the
39 options AR71XX_ENV_UBOOT
41 # Used for the static uboot partition map
44 # uzip - to boot natively from flash
48 # yes, this board has a PCI connected atheros device
49 options AR71XX_ATH_EEPROM
50 device firmware # Used by the above
51 options ATH_EEPROM_FIRMWARE
53 # Boot off of the rootfs, as defined in the geom_map setup.
54 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
56 # In order to netboot, you have to build the mfsroot into the kernel
57 # 19443712 or 19M is the biggest rootfs via netboot this thing supports
58 #options MD_ROOT # md device usable as a potential root device
59 #options MD_ROOT_SIZE=19444
60 #makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
61 #options ROOTDEVNAME=\"ufs:md0.uzip\"