2 # This file adds to the values in AR933X_BASE.hints.
7 hint.argemdio.0.at="nexus0"
8 hint.argemdio.0.maddr=0x1a000000
9 hint.argemdio.0.msize=0x1000
10 hint.argemdio.0.order=0
12 # Embedded Atheros Switch
13 hint.arswitch.0.at="mdio0"
15 # XXX this should really say it's an AR933x switch, as there
16 # are some vlan specific differences here!
17 hint.arswitch.0.is_7240=1
18 hint.arswitch.0.numphys=4
19 hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY
20 hint.arswitch.0.is_rgmii=0
21 hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII
23 # arge0 - MII, autoneg, phy(4)
24 hint.arge.0.phymask=0x10 # PHY4
25 hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
26 hint.arge.0.eeprommac=0x1fff0000
28 # arge1 - GMII, 1000/full
29 hint.arge.1.phymask=0x0 # No directly mapped PHYs
30 hint.arge.1.media=1000
32 hint.arge.1.eeprommac=0x1fff0006
35 hint.ath.0.eepromaddr=0x1fff0000
36 hint.ath.0.eepromsize=16384
39 # [ 0.510000] 5 tp-link partitions found on MTD device spi0.0
40 # [ 0.510000] Creating 5 MTD partitions on "spi0.0":
41 # [ 0.520000] 0x000000000000-0x000000020000 : "u-boot"
42 # [ 0.520000] 0x000000020000-0x000000136468 : "kernel"
43 # [ 0.530000] 0x000000136468-0x000000ff0000 : "rootfs"
44 # [ 0.530000] mtd: device 2 (rootfs) set to be root filesystem
45 # [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs
46 # [ 0.540000] 0x000000730000-0x000000fe0000 : "rootfs_data"
47 # [ 0.540000] 0x000000fe0000-0x000000ff0000 : "nvram"
48 # [ 0.550000] 0x000000ff0000-0x000001000000 : "art"
49 # [ 0.560000] 0x000000020000-0x000000fe0000 : "firmware"
52 hint.map.0.at="flash/spi0"
53 hint.map.0.start=0x00000000
54 hint.map.0.end=0x00010000
55 hint.map.0.name="u-boot"
59 hint.map.1.at="flash/spi0"
60 hint.map.1.start=0x00010000
61 hint.map.1.end=0x00020000
62 hint.map.1.name="uboot-env"
66 hint.map.2.at="flash/spi0"
67 hint.map.2.start=0x00020000
68 hint.map.2.end="search:0x00020000:0x10000:.!/bin/sh"
69 hint.map.2.name="kernel"
73 hint.map.3.at="flash/spi0"
74 hint.map.3.start="search:0x00020000:0x10000:.!/bin/sh"
75 hint.map.3.end=0x00fe0000
76 hint.map.3.name="rootfs"
80 hint.map.4.at="flash/spi0"
81 hint.map.4.start=0x00fe0000
82 hint.map.4.end=0x00ff0000
86 # all firmware 16000KiB
87 hint.map.5.at="flash/spi0"
88 hint.map.5.start=0x00020000
89 hint.map.5.end=0x00ff0000
90 hint.map.5.name="firmware"
94 hint.map.6.at="flash/spi0"
95 hint.map.6.start=0x00ff0000
96 hint.map.6.end=0x01000000
101 hint.gpio.0.pinmask=0x0c8ff1c3
103 hint.gpioled.0.at="gpiobus0"
104 hint.gpioled.0.pins=0x08000000
105 hint.gpioled.0.name="board"
106 hint.gpioled.0.invert=0
109 hint.gpioled.1.at="gpiobus0"
110 hint.gpioled.1.pins=0x00020000
111 hint.gpioled.1.name="red"
112 hint.gpioled.1.invert=0
115 hint.gpioled.2.at="gpiobus0"
116 hint.gpioled.2.pins=0x00010000
117 hint.gpioled.2.name="green"
118 hint.gpioled.2.invert=0
121 hint.gpioled.3.at="gpiobus0"
122 hint.gpioled.3.pins=0x00008000
123 hint.gpioled.3.name="blue"
124 hint.gpioled.3.invert=0
127 # 0x20 - 0x27 = Relay Controllers (0x27 is default)
128 # 0x5a = PWM/Servo Controller
129 hint.gpioiic.0.at="gpiobus0"
130 hint.gpioiic.0.pins=0x300000 # pins 20 and 21
131 hint.gpioiic.0.scl=0 # pin 20
132 hint.gpioiic.0.sda=1 # pin 21