4 hint.argemdio.0.at="nexus0"
5 hint.argemdio.0.maddr=0x19000000
6 hint.argemdio.0.msize=0x1000
7 hint.argemdio.0.order=0
9 # arge0: dedicated switch port
10 hint.arge.0.phymask=0x10 # PHY4
11 hint.arge.0.miimode=3 # RGMII
12 hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
14 # arge1: nail to 1000/full, RGMII - connected to the switch
15 hint.arge.1.media=1000 # Map to 1000/full
16 hint.arge.1.fduplex=1 #
17 hint.arge.1.phymask=0x0 # no directly mapped PHYs
18 hint.arge.1.miimode=3 # RGMII
20 hint.arswitch.0.at="mdio0"
21 hint.arswitch.0.is_7240=0
22 hint.arswitch.0.numphys=4
23 hint.arswitch.0.phy4cpu=1
24 hint.arswitch.0.is_rgmii=1
25 hint.arswitch.0.is_gmii=0
27 # Don't flip on anything that isn't already enabled.
28 # This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
30 hint.gpio.0.function_set=0x00000000
31 hint.gpio.0.function_clear=0x00000000
33 # These are the GPIO LEDs and buttons which can be software controlled.
34 hint.gpio.0.pinmask=0x000000ff
46 hint.gpioled.0.at="gpiobus0"
47 hint.gpioled.0.name="rf"
49 hint.gpioled.0.pins=0x0004