2 # TP-Link TL-WR1043nd v2 - based on the AP135 reference design.
4 # This contains a QCA9558 MIPS74k SoC with on-board 3x3 2GHz wifi,
5 # 64MiB RAM and an AR8327 5-port gigabit ethernet switch.
12 # Include the default QCA955x parameters
17 # Override hints with board values
18 hints "TL-WR1043NDv2.hints"
20 options AR71XX_REALMEM=(64*1024*1024)
22 # Options required for miiproxy and mdiobus
23 options ARGE_MDIO # Export an MDIO bus separate from arge
24 device miiproxy # MDIO bus <-> MII PHY rendezvous
29 # read MSDOS formatted disks - USB
32 # Enable the uboot environment stuff rather then the
34 options AR71XX_ENV_UBOOT
36 # uzip - to boot natively from flash
40 # Used for the static uboot partition map
43 # yes, this board has a PCI connected atheros device
45 #options AR71XX_ATH_EEPROM
46 #device firmware # Used by the above
47 #options ATH_EEPROM_FIRMWARE
49 # Boot off of the rootfs, as defined in the geom_map setup.
50 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
53 options IPFIREWALL_DEFAULT_TO_ACCEPT