]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/mips/include/cpuregs.h
Dtrace: Add SUN MDB-like type-aware print() action.
[FreeBSD/FreeBSD.git] / sys / mips / include / cpuregs.h
1 /*      $NetBSD: cpuregs.h,v 1.70 2006/05/15 02:26:54 simonb Exp $      */
2
3 /*
4  * Copyright (c) 1992, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  *
7  * This code is derived from software contributed to Berkeley by
8  * Ralph Campbell and Rick Macklem.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)machConst.h 8.1 (Berkeley) 6/10/93
35  *
36  * machConst.h --
37  *
38  *      Machine dependent constants.
39  *
40  *      Copyright (C) 1989 Digital Equipment Corporation.
41  *      Permission to use, copy, modify, and distribute this software and
42  *      its documentation for any purpose and without fee is hereby granted,
43  *      provided that the above copyright notice appears in all copies.
44  *      Digital Equipment Corporation makes no representations about the
45  *      suitability of this software for any purpose.  It is provided "as is"
46  *      without express or implied warranty.
47  *
48  * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h,
49  *      v 9.2 89/10/21 15:55:22 jhh Exp  SPRITE (DECWRL)
50  * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h,
51  *      v 1.2 89/08/15 18:28:21 rab Exp  SPRITE (DECWRL)
52  * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h,
53  *      v 9.1 89/09/18 17:33:00 shirriff Exp  SPRITE (DECWRL)
54  *
55  * $FreeBSD$
56  */
57
58 #ifndef _MIPS_CPUREGS_H_
59 #define _MIPS_CPUREGS_H_
60
61 /*
62  * Address space.
63  * 32-bit mips CPUS partition their 32-bit address space into four segments:
64  *
65  * kuseg   0x00000000 - 0x7fffffff  User virtual mem,  mapped
66  * kseg0   0x80000000 - 0x9fffffff  Physical memory, cached, unmapped
67  * kseg1   0xa0000000 - 0xbfffffff  Physical memory, uncached, unmapped
68  * kseg2   0xc0000000 - 0xffffffff  kernel-virtual,  mapped
69  *
70  * Caching of mapped addresses is controlled by bits in the TLB entry.
71  */
72
73 #define MIPS_KSEG0_LARGEST_PHYS         (0x20000000)
74 #define MIPS_KSEG0_PHYS_MASK            (0x1fffffff)
75 #define MIPS_XKPHYS_LARGEST_PHYS        (0x10000000000)  /* 40 bit PA */
76 #define MIPS_XKPHYS_PHYS_MASK           (0x0ffffffffff)
77
78 #ifndef LOCORE
79 #define MIPS_KUSEG_START                0x00000000
80 #define MIPS_KSEG0_START                ((intptr_t)(int32_t)0x80000000)
81 #define MIPS_KSEG0_END                  ((intptr_t)(int32_t)0x9fffffff)
82 #define MIPS_KSEG1_START                ((intptr_t)(int32_t)0xa0000000)
83 #define MIPS_KSEG1_END                  ((intptr_t)(int32_t)0xbfffffff)
84 #define MIPS_KSSEG_START                ((intptr_t)(int32_t)0xc0000000)
85 #define MIPS_KSSEG_END                  ((intptr_t)(int32_t)0xdfffffff)
86 #define MIPS_KSEG3_START                ((intptr_t)(int32_t)0xe0000000)
87 #define MIPS_KSEG3_END                  ((intptr_t)(int32_t)0xffffffff)
88 #define MIPS_KSEG2_START                MIPS_KSSEG_START
89 #define MIPS_KSEG2_END                  MIPS_KSSEG_END
90 #endif
91
92 #define MIPS_PHYS_TO_KSEG0(x)           ((uintptr_t)(x) | MIPS_KSEG0_START)
93 #define MIPS_PHYS_TO_KSEG1(x)           ((uintptr_t)(x) | MIPS_KSEG1_START)
94 #define MIPS_KSEG0_TO_PHYS(x)           ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
95 #define MIPS_KSEG1_TO_PHYS(x)           ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
96
97 #define MIPS_IS_KSEG0_ADDR(x)                                   \
98         (((vm_offset_t)(x) >= MIPS_KSEG0_START) &&              \
99             ((vm_offset_t)(x) <= MIPS_KSEG0_END))
100 #define MIPS_IS_KSEG1_ADDR(x)                                   \
101         (((vm_offset_t)(x) >= MIPS_KSEG1_START) &&              \
102             ((vm_offset_t)(x) <= MIPS_KSEG1_END))
103 #define MIPS_IS_VALID_PTR(x)            (MIPS_IS_KSEG0_ADDR(x) || \
104                                             MIPS_IS_KSEG1_ADDR(x))
105
106 /*
107  * Cache Coherency Attributes:
108  *      UC:     Uncached.
109  *      UA:     Uncached accelerated.
110  *      C:      Cacheable, coherency unspecified.
111  *      CNC:    Cacheable non-coherent.
112  *      CC:     Cacheable coherent.
113  *      CCE:    Cacheable coherent, exclusive read.
114  *      CCEW:   Cacheable coherent, exclusive write.
115  *      CCUOW:  Cacheable coherent, update on write.
116  *
117  * Note that some bits vary in meaning across implementations (and that the
118  * listing here is no doubt incomplete) and that the optimal cached mode varies
119  * between implementations.  0x02 is required to be UC and 0x03 is required to
120  * be a least C.
121  *
122  * We define the following logical bits:
123  *      UNCACHED:
124  *              The optimal uncached mode for the target CPU type.  This must
125  *              be suitable for use in accessing memory-mapped devices.
126  *      CACHED: The optional cached mode for the target CPU type.
127  */
128
129 #define MIPS_CCA_UC             0x02    /* Uncached. */
130 #define MIPS_CCA_C              0x03    /* Cacheable, coherency unspecified. */
131
132 #if defined(CPU_R4000) || defined(CPU_R10000)
133 #define MIPS_CCA_CNC    0x03
134 #define MIPS_CCA_CCE    0x04
135 #define MIPS_CCA_CCEW   0x05
136
137 #ifdef CPU_R4000
138 #define MIPS_CCA_CCUOW  0x06
139 #endif
140
141 #ifdef CPU_R10000
142 #define MIPS_CCA_UA     0x07
143 #endif
144
145 #define MIPS_CCA_CACHED MIPS_CCA_CCEW
146 #endif /* defined(CPU_R4000) || defined(CPU_R10000) */
147
148 #if defined(CPU_SB1)
149 #define MIPS_CCA_CC     0x05    /* Cacheable Coherent. */
150 #endif
151
152 #ifndef MIPS_CCA_UNCACHED
153 #define MIPS_CCA_UNCACHED       MIPS_CCA_UC
154 #endif
155
156 /*
157  * If we don't know which cached mode to use and there is a cache coherent
158  * mode, use it.  If there is not a cache coherent mode, use the required
159  * cacheable mode.
160  */
161 #ifndef MIPS_CCA_CACHED
162 #ifdef MIPS_CCA_CC
163 #define MIPS_CCA_CACHED MIPS_CCA_CC
164 #else
165 #define MIPS_CCA_CACHED MIPS_CCA_C
166 #endif
167 #endif
168
169 #define MIPS_PHYS_TO_XKPHYS(cca,x) \
170         ((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x))
171 #define MIPS_PHYS_TO_XKPHYS_CACHED(x) \
172         ((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_CACHED) << 59) | (x))
173 #define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \
174         ((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_UNCACHED) << 59) | (x))
175
176 #define MIPS_XKPHYS_TO_PHYS(x)          ((uintptr_t)(x) & MIPS_XKPHYS_PHYS_MASK)
177
178 #define MIPS_XKPHYS_START               0x8000000000000000
179 #define MIPS_XKPHYS_END                 0xbfffffffffffffff
180 #define MIPS_XUSEG_START                0x0000000000000000
181 #define MIPS_XUSEG_END                  0x0000010000000000
182 #define MIPS_XKSEG_START                0xc000000000000000
183 #define MIPS_XKSEG_END                  0xc00000ff80000000
184 #define MIPS_XKSEG_COMPAT32_START       0xffffffff80000000
185 #define MIPS_XKSEG_COMPAT32_END         0xffffffffffffffff
186 #define MIPS_XKSEG_TO_COMPAT32(va)      ((va) & 0xffffffff)
187
188 #ifdef __mips_n64
189 #define MIPS_DIRECT_MAPPABLE(pa)        1
190 #define MIPS_PHYS_TO_DIRECT(pa)         MIPS_PHYS_TO_XKPHYS_CACHED(pa)
191 #define MIPS_PHYS_TO_DIRECT_UNCACHED(pa)        MIPS_PHYS_TO_XKPHYS_UNCACHED(pa)
192 #define MIPS_DIRECT_TO_PHYS(va)         MIPS_XKPHYS_TO_PHYS(va)
193 #else
194 #define MIPS_DIRECT_MAPPABLE(pa)        ((pa) < MIPS_KSEG0_LARGEST_PHYS)
195 #define MIPS_PHYS_TO_DIRECT(pa)         MIPS_PHYS_TO_KSEG0(pa)
196 #define MIPS_PHYS_TO_DIRECT_UNCACHED(pa)        MIPS_PHYS_TO_KSEG1(pa)
197 #define MIPS_DIRECT_TO_PHYS(va)         MIPS_KSEG0_TO_PHYS(va)
198 #endif
199
200 /* CPU dependent mtc0 hazard hook */
201 #if defined(CPU_CNMIPS) || defined(CPU_RMI)
202 #define COP0_SYNC
203 #elif defined(CPU_NLM)
204 #define COP0_SYNC       .word 0xc0      /* ehb */
205 #elif defined(CPU_SB1)
206 #define COP0_SYNC  ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop
207 #else
208 /*
209  * Pick a reasonable default based on the "typical" spacing described in the
210  * "CP0 Hazards" chapter of MIPS Architecture Book Vol III.
211  */
212 #define COP0_SYNC  ssnop; ssnop; ssnop; ssnop; ssnop
213 #endif
214 #define COP0_HAZARD_FPUENABLE   nop; nop; nop; nop;
215
216 /*
217  * The bits in the cause register.
218  *
219  * Bits common to r3000 and r4000:
220  *
221  *      MIPS_CR_BR_DELAY        Exception happened in branch delay slot.
222  *      MIPS_CR_COP_ERR         Coprocessor error.
223  *      MIPS_CR_IP              Interrupt pending bits defined below.
224  *                              (same meaning as in CAUSE register).
225  *      MIPS_CR_EXC_CODE        The exception type (see exception codes below).
226  *
227  * Differences:
228  *  r3k has 4 bits of execption type, r4k has 5 bits.
229  */
230 #define MIPS_CR_BR_DELAY        0x80000000
231 #define MIPS_CR_COP_ERR         0x30000000
232 #define MIPS_CR_EXC_CODE        0x0000007C      /* five bits */
233 #define MIPS_CR_IP              0x0000FF00
234 #define MIPS_CR_EXC_CODE_SHIFT  2
235 #define MIPS_CR_COP_ERR_SHIFT   28
236
237 /*
238  * The bits in the status register.  All bits are active when set to 1.
239  *
240  *      R3000 status register fields:
241  *      MIPS_SR_COP_USABILITY   Control the usability of the four coprocessors.
242  *      MIPS_SR_TS              TLB shutdown.
243  *
244  *      MIPS_SR_INT_IE          Master (current) interrupt enable bit.
245  *
246  * Differences:
247  *      r3k has cache control is via frobbing SR register bits, whereas the
248  *      r4k cache control is via explicit instructions.
249  *      r3k has a 3-entry stack of kernel/user bits, whereas the
250  *      r4k has kernel/supervisor/user.
251  */
252 #define MIPS_SR_COP_USABILITY   0xf0000000
253 #define MIPS_SR_COP_0_BIT       0x10000000
254 #define MIPS_SR_COP_1_BIT       0x20000000
255 #define MIPS_SR_COP_2_BIT       0x40000000
256
257         /* r4k and r3k differences, see below */
258
259 #define MIPS_SR_MX              0x01000000      /* MIPS64 */
260 #define MIPS_SR_PX              0x00800000      /* MIPS64 */
261 #define MIPS_SR_BEV             0x00400000      /* Use boot exception vector */
262 #define MIPS_SR_TS              0x00200000
263 #define MIPS_SR_DE              0x00010000
264
265 #define MIPS_SR_INT_IE          0x00000001
266 /*#define MIPS_SR_MBZ           0x0f8000c0*/    /* Never used, true for r3k */
267 #define MIPS_SR_INT_MASK        0x0000ff00
268
269 /*
270  * R4000 status register bit definitons,
271  * where different from r2000/r3000.
272  */
273 #define MIPS_SR_XX              0x80000000
274 #define MIPS_SR_RP              0x08000000
275 #define MIPS_SR_FR              0x04000000
276 #define MIPS_SR_RE              0x02000000
277
278 #define MIPS_SR_DIAG_DL 0x01000000              /* QED 52xx */
279 #define MIPS_SR_DIAG_IL 0x00800000              /* QED 52xx */
280 #define MIPS_SR_SR              0x00100000
281 #define MIPS_SR_NMI             0x00080000              /* MIPS32/64 */
282 #define MIPS_SR_DIAG_CH 0x00040000
283 #define MIPS_SR_DIAG_CE 0x00020000
284 #define MIPS_SR_DIAG_PE 0x00010000
285 #define MIPS_SR_EIE             0x00010000              /* TX79/R5900 */
286 #define MIPS_SR_KX              0x00000080
287 #define MIPS_SR_SX              0x00000040
288 #define MIPS_SR_UX              0x00000020
289 #define MIPS_SR_KSU_MASK        0x00000018
290 #define MIPS_SR_KSU_USER        0x00000010
291 #define MIPS_SR_KSU_SUPER       0x00000008
292 #define MIPS_SR_KSU_KERNEL      0x00000000
293 #define MIPS_SR_ERL             0x00000004
294 #define MIPS_SR_EXL             0x00000002
295
296 /*
297  * The interrupt masks.
298  * If a bit in the mask is 1 then the interrupt is enabled (or pending).
299  */
300 #define MIPS_INT_MASK           0xff00
301 #define MIPS_INT_MASK_5         0x8000
302 #define MIPS_INT_MASK_4         0x4000
303 #define MIPS_INT_MASK_3         0x2000
304 #define MIPS_INT_MASK_2         0x1000
305 #define MIPS_INT_MASK_1         0x0800
306 #define MIPS_INT_MASK_0         0x0400
307 #define MIPS_HARD_INT_MASK      0xfc00
308 #define MIPS_SOFT_INT_MASK_1    0x0200
309 #define MIPS_SOFT_INT_MASK_0    0x0100
310
311 /*
312  * The bits in the MIPS3 config register.
313  *
314  *      bit 0..5: R/W, Bit 6..31: R/O
315  */
316
317 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
318 #define MIPS_CONFIG_K0_MASK     0x00000007
319
320 /*
321  * R/W Update on Store Conditional
322  *      0: Store Conditional uses coherency algorithm specified by TLB
323  *      1: Store Conditional uses cacheable coherent update on write
324  */
325 #define MIPS_CONFIG_CU          0x00000008
326
327 #define MIPS_CONFIG_DB          0x00000010      /* Primary D-cache line size */
328 #define MIPS_CONFIG_IB          0x00000020      /* Primary I-cache line size */
329 #define MIPS_CONFIG_CACHE_L1_LSIZE(config, bit) \
330         (((config) & (bit)) ? 32 : 16)
331
332 #define MIPS_CONFIG_DC_MASK     0x000001c0      /* Primary D-cache size */
333 #define MIPS_CONFIG_DC_SHIFT    6
334 #define MIPS_CONFIG_IC_MASK     0x00000e00      /* Primary I-cache size */
335 #define MIPS_CONFIG_IC_SHIFT    9
336 #define MIPS_CONFIG_C_DEFBASE   0x1000          /* default base 2^12 */
337
338 /* Cache size mode indication: available only on Vr41xx CPUs */
339 #define MIPS_CONFIG_CS          0x00001000
340 #define MIPS_CONFIG_C_4100BASE  0x0400          /* base is 2^10 if CS=1 */
341 #define MIPS_CONFIG_CACHE_SIZE(config, mask, base, shift) \
342         ((base) << (((config) & (mask)) >> (shift)))
343
344 /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */
345 #define MIPS_CONFIG_SE          0x00001000
346
347 /* Block ordering: 0: sequential, 1: sub-block */
348 #define MIPS_CONFIG_EB          0x00002000
349
350 /* ECC mode - 0: ECC mode, 1: parity mode */
351 #define MIPS_CONFIG_EM          0x00004000
352
353 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */
354 #define MIPS_CONFIG_BE          0x00008000
355
356 /* Dirty Shared coherency state - 0: enabled, 1: disabled */
357 #define MIPS_CONFIG_SM          0x00010000
358
359 /* Secondary Cache - 0: present, 1: not present */
360 #define MIPS_CONFIG_SC          0x00020000
361
362 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */
363 #define MIPS_CONFIG_EW_MASK     0x000c0000
364 #define MIPS_CONFIG_EW_SHIFT    18
365
366 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */
367 #define MIPS_CONFIG_SW          0x00100000
368
369 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */
370 #define MIPS_CONFIG_SS          0x00200000
371
372 /* Secondary Cache line size */
373 #define MIPS_CONFIG_SB_MASK     0x00c00000
374 #define MIPS_CONFIG_SB_SHIFT    22
375 #define MIPS_CONFIG_CACHE_L2_LSIZE(config) \
376         (0x10 << (((config) & MIPS_CONFIG_SB_MASK) >> MIPS_CONFIG_SB_SHIFT))
377
378 /* Write back data rate */
379 #define MIPS_CONFIG_EP_MASK     0x0f000000
380 #define MIPS_CONFIG_EP_SHIFT    24
381
382 /* System clock ratio - this value is CPU dependent */
383 #define MIPS_CONFIG_EC_MASK     0x70000000
384 #define MIPS_CONFIG_EC_SHIFT    28
385
386 /* Master-Checker Mode - 1: enabled */
387 #define MIPS_CONFIG_CM          0x80000000
388
389 /*
390  * The bits in the MIPS4 config register.
391  */
392
393 /*
394  * Location of exception vectors.
395  *
396  * Common vectors:  reset and UTLB miss.
397  */
398 #define MIPS_RESET_EXC_VEC      ((intptr_t)(int32_t)0xBFC00000)
399 #define MIPS_UTLB_MISS_EXC_VEC  ((intptr_t)(int32_t)0x80000000)
400
401 /*
402  * MIPS-III exception vectors
403  */
404 #define MIPS_XTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000080)
405 #define MIPS_CACHE_ERR_EXC_VEC ((intptr_t)(int32_t)0x80000100)
406 #define MIPS_GEN_EXC_VEC        ((intptr_t)(int32_t)0x80000180)
407
408 /*
409  * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector.
410  */
411 #define MIPS_INTR_EXC_VEC       0x80000200
412
413 /*
414  * Coprocessor 0 registers:
415  *
416  *                              v--- width for mips I,III,32,64
417  *                                   (3=32bit, 6=64bit, i=impl dep)
418  *  0   MIPS_COP_0_TLB_INDEX    3333 TLB Index.
419  *  1   MIPS_COP_0_TLB_RANDOM   3333 TLB Random.
420  *  2   MIPS_COP_0_TLB_LO0      .636 r4k TLB entry low.
421  *  3   MIPS_COP_0_TLB_LO1      .636 r4k TLB entry low, extended.
422  *  4   MIPS_COP_0_TLB_CONTEXT  3636 TLB Context.
423  *  5   MIPS_COP_0_TLB_PG_MASK  .333 TLB Page Mask register.
424  *  6   MIPS_COP_0_TLB_WIRED    .333 Wired TLB number.
425  *  7   MIPS_COP_0_INFO         ..33 Info registers
426  *  8   MIPS_COP_0_BAD_VADDR    3636 Bad virtual address.
427  *  9   MIPS_COP_0_COUNT        .333 Count register.
428  * 10   MIPS_COP_0_TLB_HI       3636 TLB entry high.
429  * 11   MIPS_COP_0_COMPARE      .333 Compare (against Count).
430  * 12   MIPS_COP_0_STATUS       3333 Status register.
431  * 13   MIPS_COP_0_CAUSE        3333 Exception cause register.
432  * 14   MIPS_COP_0_EXC_PC       3636 Exception PC.
433  * 15   MIPS_COP_0_PRID         3333 Processor revision identifier.
434  * 16   MIPS_COP_0_CONFIG       3333 Configuration register.
435  * 16/1 MIPS_COP_0_CONFIG1      ..33 Configuration register 1.
436  * 16/2 MIPS_COP_0_CONFIG2      ..33 Configuration register 2.
437  * 16/3 MIPS_COP_0_CONFIG3      ..33 Configuration register 3.
438  * 16/4 MIPS_COP_0_CONFIG4      ..33 Configuration register 4.
439  * 17   MIPS_COP_0_LLADDR       .336 Load Linked Address.
440  * 18   MIPS_COP_0_WATCH_LO     .336 WatchLo register.
441  * 19   MIPS_COP_0_WATCH_HI     .333 WatchHi register.
442  * 20   MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register.
443  * 23   MIPS_COP_0_DEBUG        .... Debug JTAG register.
444  * 24   MIPS_COP_0_DEPC         .... DEPC JTAG register.
445  * 25   MIPS_COP_0_PERFCNT      ..36 Performance Counter register.
446  * 26   MIPS_COP_0_ECC          .3ii ECC / Error Control register.
447  * 27   MIPS_COP_0_CACHE_ERR    .3ii Cache Error register.
448  * 28/0 MIPS_COP_0_TAG_LO       .3ii Cache TagLo register (instr).
449  * 28/1 MIPS_COP_0_DATA_LO      ..ii Cache DataLo register (instr).
450  * 28/2 MIPS_COP_0_TAG_LO       ..ii Cache TagLo register (data).
451  * 28/3 MIPS_COP_0_DATA_LO      ..ii Cache DataLo register (data).
452  * 29/0 MIPS_COP_0_TAG_HI       .3ii Cache TagHi register (instr).
453  * 29/1 MIPS_COP_0_DATA_HI      ..ii Cache DataHi register (instr).
454  * 29/2 MIPS_COP_0_TAG_HI       ..ii Cache TagHi register (data).
455  * 29/3 MIPS_COP_0_DATA_HI      ..ii Cache DataHi register (data).
456  * 30   MIPS_COP_0_ERROR_PC     .636 Error EPC register.
457  * 31   MIPS_COP_0_DESAVE       .... DESAVE JTAG register.
458  */
459
460 /* Deal with inclusion from an assembly file. */
461 #if defined(_LOCORE) || defined(LOCORE)
462 #define _(n)    $n
463 #else
464 #define _(n)    n
465 #endif
466
467
468 #define MIPS_COP_0_TLB_INDEX    _(0)
469 #define MIPS_COP_0_TLB_RANDOM   _(1)
470         /* Name and meaning of  TLB bits for $2 differ on r3k and r4k. */
471
472 #define MIPS_COP_0_TLB_CONTEXT  _(4)
473                                         /* $5 and $6 new with MIPS-III */
474 #define MIPS_COP_0_BAD_VADDR    _(8)
475 #define MIPS_COP_0_TLB_HI       _(10)
476 #define MIPS_COP_0_STATUS       _(12)
477 #define MIPS_COP_0_CAUSE        _(13)
478 #define MIPS_COP_0_EXC_PC       _(14)
479 #define MIPS_COP_0_PRID         _(15)
480
481 /* MIPS-III */
482 #define MIPS_COP_0_TLB_LO0      _(2)
483 #define MIPS_COP_0_TLB_LO1      _(3)
484
485 #define MIPS_COP_0_TLB_PG_MASK  _(5)
486 #define MIPS_COP_0_TLB_WIRED    _(6)
487
488 #define MIPS_COP_0_COUNT        _(9)
489 #define MIPS_COP_0_COMPARE      _(11)
490
491 #define MIPS_COP_0_CONFIG       _(16)
492 #define MIPS_COP_0_LLADDR       _(17)
493 #define MIPS_COP_0_WATCH_LO     _(18)
494 #define MIPS_COP_0_WATCH_HI     _(19)
495 #define MIPS_COP_0_TLB_XCONTEXT _(20)
496 #define MIPS_COP_0_ECC          _(26)
497 #define MIPS_COP_0_CACHE_ERR    _(27)
498 #define MIPS_COP_0_TAG_LO       _(28)
499 #define MIPS_COP_0_TAG_HI       _(29)
500 #define MIPS_COP_0_ERROR_PC     _(30)
501
502 /* MIPS32/64 */
503 #define MIPS_COP_0_INFO         _(7)
504 #define MIPS_COP_0_DEBUG        _(23)
505 #define MIPS_COP_0_DEPC         _(24)
506 #define MIPS_COP_0_PERFCNT      _(25)
507 #define MIPS_COP_0_DATA_LO      _(28)
508 #define MIPS_COP_0_DATA_HI      _(29)
509 #define MIPS_COP_0_DESAVE       _(31)
510
511 /* MIPS32 Config register definitions */
512 #define MIPS_MMU_NONE                   0x00            /* No MMU present */
513 #define MIPS_MMU_TLB                    0x01            /* Standard TLB */
514 #define MIPS_MMU_BAT                    0x02            /* Standard BAT */
515 #define MIPS_MMU_FIXED                  0x03            /* Standard fixed mapping */
516
517 #define MIPS_CONFIG0_MT_MASK            0x00000380      /* bits 9..7 MMU Type */
518 #define MIPS_CONFIG0_MT_SHIFT           7
519 #define MIPS_CONFIG0_BE                 0x00008000      /* data is big-endian */
520 #define MIPS_CONFIG0_VI                 0x00000004      /* instruction cache is virtual */
521
522 #define MIPS_CONFIG1_TLBSZ_MASK         0x7E000000      /* bits 30..25 # tlb entries minus one */
523 #define MIPS_CONFIG1_TLBSZ_SHIFT        25
524 #define MIPS_MAX_TLB_ENTRIES            128
525
526 #define MIPS_CONFIG1_IS_MASK            0x01C00000      /* bits 24..22 icache sets per way */
527 #define MIPS_CONFIG1_IS_SHIFT           22
528 #define MIPS_CONFIG1_IL_MASK            0x00380000      /* bits 21..19 icache line size */
529 #define MIPS_CONFIG1_IL_SHIFT           19
530 #define MIPS_CONFIG1_IA_MASK            0x00070000      /* bits 18..16 icache associativity */
531 #define MIPS_CONFIG1_IA_SHIFT           16
532 #define MIPS_CONFIG1_DS_MASK            0x0000E000      /* bits 15..13 dcache sets per way */
533 #define MIPS_CONFIG1_DS_SHIFT           13
534 #define MIPS_CONFIG1_DL_MASK            0x00001C00      /* bits 12..10 dcache line size */
535 #define MIPS_CONFIG1_DL_SHIFT           10
536 #define MIPS_CONFIG1_DA_MASK            0x00000380      /* bits  9.. 7 dcache associativity */
537 #define MIPS_CONFIG1_DA_SHIFT           7
538 #define MIPS_CONFIG1_LOWBITS            0x0000007F
539 #define MIPS_CONFIG1_C2                 0x00000040      /* Coprocessor 2 implemented */
540 #define MIPS_CONFIG1_MD                 0x00000020      /* MDMX ASE implemented (MIPS64) */
541 #define MIPS_CONFIG1_PC                 0x00000010      /* Performance counters implemented */
542 #define MIPS_CONFIG1_WR                 0x00000008      /* Watch registers implemented */
543 #define MIPS_CONFIG1_CA                 0x00000004      /* MIPS16e ISA implemented */
544 #define MIPS_CONFIG1_EP                 0x00000002      /* EJTAG implemented */
545 #define MIPS_CONFIG1_FP                 0x00000001      /* FPU implemented */
546
547 #define MIPS_CONFIG4_MMUSIZEEXT         0x000000FF      /* bits 7.. 0 MMU Size Extension */
548 #define MIPS_CONFIG4_MMUEXTDEF          0x0000C000      /* bits 15.14 MMU Extension Definition */
549 #define MIPS_CONFIG4_MMUEXTDEF_MMUSIZEEXT       0x00004000 /* This values denotes CONFIG4 bits  */
550
551 /*
552  * Values for the code field in a break instruction.
553  */
554 #define MIPS_BREAK_INSTR        0x0000000d
555 #define MIPS_BREAK_VAL_MASK     0x03ff0000
556 #define MIPS_BREAK_VAL_SHIFT    16
557 #define MIPS_BREAK_KDB_VAL      512
558 #define MIPS_BREAK_SSTEP_VAL    513
559 #define MIPS_BREAK_BRKPT_VAL    514
560 #define MIPS_BREAK_SOVER_VAL    515
561 #define MIPS_BREAK_DDB_VAL      516
562 #define MIPS_BREAK_KDB          (MIPS_BREAK_INSTR | \
563                                 (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT))
564 #define MIPS_BREAK_SSTEP        (MIPS_BREAK_INSTR | \
565                                 (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT))
566 #define MIPS_BREAK_BRKPT        (MIPS_BREAK_INSTR | \
567                                 (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT))
568 #define MIPS_BREAK_SOVER        (MIPS_BREAK_INSTR | \
569                                 (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT))
570 #define MIPS_BREAK_DDB          (MIPS_BREAK_INSTR | \
571                                 (MIPS_BREAK_DDB_VAL << MIPS_BREAK_VAL_SHIFT))
572
573 /*
574  * Mininum and maximum cache sizes.
575  */
576 #define MIPS_MIN_CACHE_SIZE     (16 * 1024)
577 #define MIPS_MAX_CACHE_SIZE     (256 * 1024)
578 #define MIPS_MAX_PCACHE_SIZE    (32 * 1024)     /* max. primary cache size */
579
580 /*
581  * The floating point version and status registers.
582  */
583 #define MIPS_FPU_ID     $0
584 #define MIPS_FPU_CSR    $31
585
586 /*
587  * The floating point coprocessor status register bits.
588  */
589 #define MIPS_FPU_ROUNDING_BITS          0x00000003
590 #define MIPS_FPU_ROUND_RN               0x00000000
591 #define MIPS_FPU_ROUND_RZ               0x00000001
592 #define MIPS_FPU_ROUND_RP               0x00000002
593 #define MIPS_FPU_ROUND_RM               0x00000003
594 #define MIPS_FPU_STICKY_BITS            0x0000007c
595 #define MIPS_FPU_STICKY_INEXACT         0x00000004
596 #define MIPS_FPU_STICKY_UNDERFLOW       0x00000008
597 #define MIPS_FPU_STICKY_OVERFLOW        0x00000010
598 #define MIPS_FPU_STICKY_DIV0            0x00000020
599 #define MIPS_FPU_STICKY_INVALID         0x00000040
600 #define MIPS_FPU_ENABLE_BITS            0x00000f80
601 #define MIPS_FPU_ENABLE_INEXACT         0x00000080
602 #define MIPS_FPU_ENABLE_UNDERFLOW       0x00000100
603 #define MIPS_FPU_ENABLE_OVERFLOW        0x00000200
604 #define MIPS_FPU_ENABLE_DIV0            0x00000400
605 #define MIPS_FPU_ENABLE_INVALID         0x00000800
606 #define MIPS_FPU_EXCEPTION_BITS         0x0003f000
607 #define MIPS_FPU_EXCEPTION_INEXACT      0x00001000
608 #define MIPS_FPU_EXCEPTION_UNDERFLOW    0x00002000
609 #define MIPS_FPU_EXCEPTION_OVERFLOW     0x00004000
610 #define MIPS_FPU_EXCEPTION_DIV0         0x00008000
611 #define MIPS_FPU_EXCEPTION_INVALID      0x00010000
612 #define MIPS_FPU_EXCEPTION_UNIMPL       0x00020000
613 #define MIPS_FPU_COND_BIT               0x00800000
614 #define MIPS_FPU_FLUSH_BIT              0x01000000      /* r4k,  MBZ on r3k */
615 #define MIPS_FPC_MBZ_BITS               0xfe7c0000
616
617
618 /*
619  * Constants to determine if have a floating point instruction.
620  */
621 #define MIPS_OPCODE_SHIFT       26
622 #define MIPS_OPCODE_C1          0x11
623
624 #endif /* _MIPS_CPUREGS_H_ */