2 * Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in
13 * the documentation and/or other materials provided with the
16 * THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
26 * THE POSSIBILITY OF SUCH DAMAGE.
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
33 #include <sys/systm.h>
35 #include <sys/kernel.h>
37 #include <sys/mutex.h>
39 #include <net/ethernet.h>
41 #include <mips/nlm/hal/mips-extns.h>
42 #include <mips/nlm/hal/haldefs.h>
43 #include <mips/nlm/hal/iomap.h>
44 #include <mips/nlm/hal/fmn.h>
45 #include <mips/nlm/hal/pic.h>
46 #include <mips/nlm/hal/sys.h>
47 #include <mips/nlm/hal/nae.h>
48 #include <mips/nlm/hal/uart.h>
49 #include <mips/nlm/hal/poe.h>
51 #include <mips/nlm/xlp.h>
52 #include <mips/nlm/board.h>
53 #include <mips/nlm/msgring.h>
55 static uint8_t board_eeprom_buf[EEPROM_SIZE];
56 static int board_eeprom_set;
58 struct xlp_board_info xlp_board_info;
65 /* XXXJC : this should be derived from msg thread mask */
66 static struct vfbid_tbl nlm_vfbid[] = {
67 /* NULL FBID should map to cpu0 to detect NAE send msg errors */
68 {127, 0}, /* NAE <-> NAE mappings */
69 {51, 1019}, {50, 1018}, {49, 1017}, {48, 1016},
70 {47, 1015}, {46, 1014}, {45, 1013}, {44, 1012},
71 {43, 1011}, {42, 1010}, {41, 1009}, {40, 1008},
72 {39, 1007}, {38, 1006}, {37, 1005}, {36, 1004},
73 {35, 1003}, {34, 1002}, {33, 1001}, {32, 1000},
74 /* NAE <-> CPU mappings, freeback got to vc 3 of each thread */
75 {31, 127}, {30, 123}, {29, 119}, {28, 115},
76 {27, 111}, {26, 107}, {25, 103}, {24, 99},
77 {23, 95}, {22, 91}, {21, 87}, {20, 83},
78 {19, 79}, {18, 75}, {17, 71}, {16, 67},
79 {15, 63}, {14, 59}, {13, 55}, {12, 51},
80 {11, 47}, {10, 43}, { 9, 39}, { 8, 35},
81 { 7, 31}, { 6, 27}, { 5, 23}, { 4, 19},
82 { 3, 15}, { 2, 11}, { 1, 7}, { 0, 3},
85 static struct vfbid_tbl nlm3xx_vfbid[] = {
86 /* NULL FBID should map to cpu0 to detect NAE send msg errors */
87 {127, 0}, /* NAE <-> NAE mappings */
88 {39, 503}, {38, 502}, {37, 501}, {36, 500},
89 {35, 499}, {34, 498}, {33, 497}, {32, 496},
90 /* NAE <-> CPU mappings, freeback got to vc 3 of each thread */
91 {31, 127}, {30, 123}, {29, 119}, {28, 115},
92 {27, 111}, {26, 107}, {25, 103}, {24, 99},
93 {23, 95}, {22, 91}, {21, 87}, {20, 83},
94 {19, 79}, {18, 75}, {17, 71}, {16, 67},
95 {15, 63}, {14, 59}, {13, 55}, {12, 51},
96 {11, 47}, {10, 43}, { 9, 39}, { 8, 35},
97 { 7, 31}, { 6, 27}, { 5, 23}, { 4, 19},
98 { 3, 15}, { 2, 11}, { 1, 7}, { 0, 3},
102 nlm_get_vfbid_mapping(int vfbid)
107 if (nlm_is_xlp3xx()) {
108 nentries = sizeof(nlm3xx_vfbid)/sizeof(struct vfbid_tbl);
111 nentries = sizeof(nlm_vfbid)/sizeof(struct vfbid_tbl);
115 for (i = 0; i < nentries; i++) {
116 if (p[i].vfbid == vfbid)
117 return (p[i].dest_vc);
124 nlm_get_poe_distvec(int vec, uint32_t *distvec)
128 return (-1); /* we support just vec 0 */
129 nlm_calc_poe_distvec(xlp_msg_thread_mask, 0, 0, 0,
130 0x1 << XLPGE_RX_VC, distvec);
135 * All our knowledge of chip and board that cannot be detected by probing
136 * at run-time goes here
140 xlpge_get_macaddr(uint8_t *macaddr)
143 if (board_eeprom_set == 0) {
144 /* No luck, take some reasonable value */
145 macaddr[0] = 0x00; macaddr[1] = 0x0f; macaddr[2] = 0x30;
146 macaddr[3] = 0x20; macaddr[4] = 0x0d; macaddr[5] = 0x5b;
148 memcpy(macaddr, &board_eeprom_buf[EEPROM_MACADDR_OFFSET],
153 nlm_setup_port_defaults(struct xlp_port_ivars *p)
155 p->loopback_mode = 0;
157 p->free_desc_sizes = 2048;
160 p->ieee1588_userval = 0;
161 p->ieee1588_ptpoff = 0;
162 p->ieee1588_tmr1 = 0;
163 p->ieee1588_tmr2 = 0;
164 p->ieee1588_tmr3 = 0;
165 p->ieee1588_inc_intg = 0;
166 p->ieee1588_inc_den = 1;
167 p->ieee1588_inc_num = 1;
169 if (nlm_is_xlp3xx()) {
170 p->stg2_fifo_size = XLP3XX_STG2_FIFO_SZ;
171 p->eh_fifo_size = XLP3XX_EH_FIFO_SZ;
172 p->frout_fifo_size = XLP3XX_FROUT_FIFO_SZ;
173 p->ms_fifo_size = XLP3XX_MS_FIFO_SZ;
174 p->pkt_fifo_size = XLP3XX_PKT_FIFO_SZ;
175 p->pktlen_fifo_size = XLP3XX_PKTLEN_FIFO_SZ;
176 p->max_stg2_offset = XLP3XX_MAX_STG2_OFFSET;
177 p->max_eh_offset = XLP3XX_MAX_EH_OFFSET;
178 p->max_frout_offset = XLP3XX_MAX_FREE_OUT_OFFSET;
179 p->max_ms_offset = XLP3XX_MAX_MS_OFFSET;
180 p->max_pmem_offset = XLP3XX_MAX_PMEM_OFFSET;
181 p->stg1_2_credit = XLP3XX_STG1_2_CREDIT;
182 p->stg2_eh_credit = XLP3XX_STG2_EH_CREDIT;
183 p->stg2_frout_credit = XLP3XX_STG2_FROUT_CREDIT;
184 p->stg2_ms_credit = XLP3XX_STG2_MS_CREDIT;
186 p->stg2_fifo_size = XLP8XX_STG2_FIFO_SZ;
187 p->eh_fifo_size = XLP8XX_EH_FIFO_SZ;
188 p->frout_fifo_size = XLP8XX_FROUT_FIFO_SZ;
189 p->ms_fifo_size = XLP8XX_MS_FIFO_SZ;
190 p->pkt_fifo_size = XLP8XX_PKT_FIFO_SZ;
191 p->pktlen_fifo_size = XLP8XX_PKTLEN_FIFO_SZ;
192 p->max_stg2_offset = XLP8XX_MAX_STG2_OFFSET;
193 p->max_eh_offset = XLP8XX_MAX_EH_OFFSET;
194 p->max_frout_offset = XLP8XX_MAX_FREE_OUT_OFFSET;
195 p->max_ms_offset = XLP8XX_MAX_MS_OFFSET;
196 p->max_pmem_offset = XLP8XX_MAX_PMEM_OFFSET;
197 p->stg1_2_credit = XLP8XX_STG1_2_CREDIT;
198 p->stg2_eh_credit = XLP8XX_STG2_EH_CREDIT;
199 p->stg2_frout_credit = XLP8XX_STG2_FROUT_CREDIT;
200 p->stg2_ms_credit = XLP8XX_STG2_MS_CREDIT;
205 p->num_free_descs = 52;
206 p->iface_fifo_size = 13;
208 p->rx_slots_reqd = SGMII_CAL_SLOTS;
209 p->tx_slots_reqd = SGMII_CAL_SLOTS;
211 p->pseq_fifo_size = 30;
213 p->pseq_fifo_size = 62;
216 p->num_free_descs = 150;
218 p->rx_slots_reqd = IL8_CAL_SLOTS;
219 p->tx_slots_reqd = IL8_CAL_SLOTS;
220 p->pseq_fifo_size = 225;
221 p->iface_fifo_size = 55;
225 p->num_free_descs = 150;
227 p->rx_slots_reqd = XAUI_CAL_SLOTS;
228 p->tx_slots_reqd = XAUI_CAL_SLOTS;
229 if (nlm_is_xlp3xx()) {
230 p->pseq_fifo_size = 120;
231 p->iface_fifo_size = 52;
233 p->pseq_fifo_size = 225;
234 p->iface_fifo_size = 55;
240 /* XLP 8XX evaluation boards have the following phy-addr
241 * assignment. There are two external mdio buses in XLP --
242 * bus 0 and bus 1. The management ports (16 and 17) are
243 * on mdio bus 0 while blocks/complexes[0 to 3] are all
244 * on mdio bus 1. The phy_addr on bus 0 (mgmt ports 16
245 * and 17) match the port numbers.
246 * These are the details:
247 * block port phy_addr mdio_bus
248 * ====================================
269 * The XLP 3XX evaluation boards have the following phy-addr
271 * block port phy_addr mdio_bus
272 * ====================================
283 nlm_board_get_phyaddr(int block, int port, int *phyaddr)
286 case 0: switch (port) {
287 case 0: *phyaddr = 4; break;
288 case 1: *phyaddr = 7; break;
289 case 2: *phyaddr = 6; break;
290 case 3: *phyaddr = 5; break;
293 case 1: switch (port) {
294 case 0: *phyaddr = 8; break;
295 case 1: *phyaddr = 11; break;
296 case 2: *phyaddr = 10; break;
297 case 3: *phyaddr = 9; break;
300 case 2: switch (port) {
301 case 0: *phyaddr = 0; break;
302 case 1: *phyaddr = 3; break;
303 case 2: *phyaddr = 2; break;
304 case 3: *phyaddr = 1; break;
307 case 3: switch (port) {
308 case 0: *phyaddr = 12; break;
309 case 1: *phyaddr = 15; break;
310 case 2: *phyaddr = 14; break;
311 case 3: *phyaddr = 13; break;
314 case 4: switch (port) { /* management SGMII */
315 case 0: *phyaddr = 16; break;
316 case 1: *phyaddr = 17; break;
324 nlm_print_processor_info(void)
330 procid = mips_rd_prid();
331 prid = (procid >> 8) & 0xff;
335 case CHIP_PROCESSOR_ID_XLP_8XX:
338 case CHIP_PROCESSOR_ID_XLP_3XX:
341 case CHIP_PROCESSOR_ID_XLP_432:
342 case CHIP_PROCESSOR_ID_XLP_416:
351 revstr = "A0"; break;
353 revstr = "A1"; break;
355 revstr = "A2"; break;
357 revstr = "B0"; break;
359 revstr = "B1"; break;
361 revstr = "??"; break;
364 printf("Processor info:\n");
365 printf(" Netlogic %s %s [%x]\n", chip, revstr, procid);
369 * All our knowledge of chip and board that cannot be detected by probing
370 * at run-time goes here
373 nlm_setup_xlp_board(int node)
375 struct xlp_board_info *boardp;
376 struct xlp_node_info *nodep;
377 struct xlp_nae_ivars *naep;
378 struct xlp_block_ivars *blockp;
379 struct xlp_port_ivars *portp;
380 uint64_t cpldbase, nae_pcibase;
381 int block, port, rv, dbtype, usecpld = 0, evp = 0, svp = 0;
384 /* start with a clean slate */
385 boardp = &xlp_board_info;
386 if (boardp->nodemask == 0)
387 memset(boardp, 0, sizeof(xlp_board_info));
388 boardp->nodemask |= (1 << node);
389 nlm_print_processor_info();
391 b = board_eeprom_buf;
392 rv = nlm_board_eeprom_read(node, EEPROM_I2CBUS, EEPROM_I2CADDR, 0, b,
395 board_eeprom_set = 1;
396 printf("Board info (EEPROM on i2c@%d at %#X):\n",
397 EEPROM_I2CBUS, EEPROM_I2CADDR);
398 printf(" Model: %7.7s %2.2s\n", &b[16], &b[24]);
399 printf(" Serial #: %3.3s-%2.2s\n", &b[27], &b[31]);
400 printf(" MAC addr: %02x:%02x:%02x:%02x:%02x:%02x\n",
401 b[2], b[3], b[4], b[5], b[6], b[7]);
403 printf("Board Info: Error on EEPROM read (i2c@%d %#X).\n",
404 EEPROM_I2CBUS, EEPROM_I2CADDR);
406 nae_pcibase = nlm_get_nae_pcibase(node);
407 nodep = &boardp->nodes[node];
408 naep = &nodep->nae_ivars;
411 /* frequency at which network block runs */
414 /* CRC16 polynomial used for flow table generation */
415 naep->flow_crc_poly = 0xffff;
416 naep->hw_parser_en = 1;
418 naep->prepad_size = 3; /* size in 16 byte units */
419 naep->ieee_1588_en = 1;
421 naep->ilmask = 0x0; /* set this based on daughter card */
422 naep->xauimask = 0x0; /* set this based on daughter card */
423 naep->sgmiimask = 0x0; /* set this based on daughter card */
424 naep->nblocks = nae_num_complex(nae_pcibase);
425 if (strncmp(&b[16], "PCIE", 4) == 0) {
426 usecpld = 0; /* XLP PCIe card */
427 /* Broadcom's XLP PCIe card has the following
429 * blk 0-XAUI, 1-XAUI, 4-SGMII(one port) */
430 naep->blockmask = 0x13;
431 } else if (strncmp(&b[16], "MB-EVP", 6) == 0) {
432 usecpld = 1; /* XLP non-PCIe card which has CPLD */
434 naep->blockmask = (1 << naep->nblocks) - 1;
435 } else if ((strncmp(&b[16], "MB-S", 4) == 0) ||
436 (strncmp(&b[16], "MB_S", 4) == 0)) {
437 usecpld = 1; /* XLP non-PCIe card which has CPLD */
439 /* 3xx chip reports one block extra which is a bug */
440 naep->nblocks = naep->nblocks - 1;
441 naep->blockmask = (1 << naep->nblocks) - 1;
443 printf("ERROR!!! Board type:%7s didn't match any board"
444 " type we support\n", &b[16]);
447 cpldbase = nlm_board_cpld_base(node, XLP_EVB_CPLD_CHIPSELECT);
449 /* pretty print network config */
450 printf("Network config");
452 printf("(from CPLD@%d):\n", XLP_EVB_CPLD_CHIPSELECT);
454 printf("(defaults):\n");
455 printf(" NAE@%d Blocks: ", node);
456 for (block = 0; block < naep->nblocks; block++) {
459 if ((naep->blockmask & (1 << block)) == 0)
461 blockp = &naep->block_ivars[block];
462 blockp->block = block;
464 dbtype = nlm_board_cpld_dboard_type(cpldbase, block);
466 dbtype = DCARD_XAUI; /* default XAUI */
469 if ((!evp && !svp) && ((block == 2) || (block == 3)))
470 dbtype = DCARD_NOT_PRSNT;
473 /* management block 4 on 8xx or XLP PCIe */
474 blockp->type = SGMIIC;
476 blockp->portmask = 0x3;
478 blockp->portmask = 0x1;
479 naep->sgmiimask |= (1 << block);
484 blockp->portmask = 0x1;
485 naep->ilmask |= (1 << block);
488 blockp->type = SGMIIC;
489 blockp->portmask = 0xf;
490 naep->sgmiimask |= (1 << block);
493 blockp->type = XAUIC;
494 blockp->portmask = 0x1;
495 naep->xauimask |= (1 << block);
497 default: /* DCARD_NOT_PRSNT */
498 blockp->type = UNKNOWN;
499 blockp->portmask = 0;
503 if (blockp->type != UNKNOWN) {
504 for (port = 0; port < PORTS_PER_CMPLX; port++) {
505 if ((blockp->portmask & (1 << port)) == 0)
507 portp = &blockp->port_ivars[port];
508 nlm_board_get_phyaddr(block, port,
510 if (svp || (block == 4))
515 portp->block = block;
517 portp->type = blockp->type;
518 nlm_setup_port_defaults(portp);
521 switch (blockp->type) {
522 case SGMIIC : s = "SGMII"; break;
523 case XAUIC : s = "XAUI"; break;
524 case ILC : s = "IL"; break;
526 printf(" [%d %s]", block, s);
532 int nlm_board_info_setup(void)
534 if (nlm_setup_xlp_board(0) != 0)