2 * Copyright (c) 2003-2012 Broadcom Corporation
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in
13 * the documentation and/or other materials provided with the
16 * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
18 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
23 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
24 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
25 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
26 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/types.h>
35 #include <sys/kernel.h>
36 #include <sys/module.h>
37 #include <sys/malloc.h>
39 #include <sys/endian.h>
41 #include <sys/pciio.h>
44 #include <vm/vm_param.h>
47 #include <dev/pci/pcivar.h>
48 #include <dev/pci/pcireg.h>
49 #include <dev/pci/pci_private.h>
51 #include <dev/uart/uart.h>
52 #include <dev/uart/uart_bus.h>
53 #include <dev/uart/uart_cpu.h>
55 #include <dev/ofw/openfirm.h>
56 #include <dev/ofw/ofw_bus.h>
57 #include <dev/ofw/ofw_bus_subr.h>
59 #include <machine/bus.h>
60 #include <machine/md_var.h>
61 #include <machine/intr_machdep.h>
62 #include <machine/cpuregs.h>
64 #include <mips/nlm/hal/haldefs.h>
65 #include <mips/nlm/interrupt.h>
66 #include <mips/nlm/hal/iomap.h>
67 #include <mips/nlm/hal/mips-extns.h>
68 #include <mips/nlm/hal/pic.h>
69 #include <mips/nlm/hal/bridge.h>
70 #include <mips/nlm/hal/gbu.h>
71 #include <mips/nlm/hal/pcibus.h>
72 #include <mips/nlm/hal/uart.h>
73 #include <mips/nlm/xlp.h>
79 xlp_pci_attach(device_t dev)
81 struct pci_devinfo *dinfo;
83 int maxslots, s, f, pcifunchigh, irq;
84 int busno, node, devoffset;
89 * The on-chip devices are on a bus that is almost, but not
90 * quite, completely like PCI. Add those things by hand.
92 pcib = device_get_parent(dev);
93 busno = pcib_get_bus(dev);
94 maxslots = PCIB_MAXSLOTS(pcib);
95 for (s = 0; s <= maxslots; s++) {
98 hdrtype = PCIB_READ_CONFIG(pcib, busno, s, f, PCIR_HDRTYPE, 1);
99 if ((hdrtype & PCIM_HDRTYPE) > PCI_MAXHDRTYPE)
101 if (hdrtype & PCIM_MFDEV)
102 pcifunchigh = PCI_FUNCMAX;
104 for (f = 0; f <= pcifunchigh; f++) {
105 devoffset = XLP_HDR_OFFSET(node, 0, s % 8, f);
106 if (!nlm_dev_exists(devoffset))
109 /* Find if there is a desc for the SoC device */
110 devid = PCIB_READ_CONFIG(pcib, busno, s, f, PCIR_DEVICE, 2);
112 /* Skip devices that don't have a proper PCI header */
114 case PCI_DEVICE_ID_NLM_ICI:
115 case PCI_DEVICE_ID_NLM_PIC:
116 case PCI_DEVICE_ID_NLM_FMN:
117 case PCI_DEVICE_ID_NLM_UART:
118 case PCI_DEVICE_ID_NLM_I2C:
119 case PCI_DEVICE_ID_NLM_NOR:
120 case PCI_DEVICE_ID_NLM_MMC:
122 case PCI_DEVICE_ID_NLM_EHCI:
123 irq = PIC_USB_IRQ(f);
124 PCIB_WRITE_CONFIG(pcib, busno, s, f,
125 XLP_PCI_DEVSCRATCH_REG0 << 2,
128 dinfo = pci_read_device(pcib, dev, pcib_get_domain(dev),
130 pci_add_child(dev, dinfo);
133 return (bus_generic_attach(dev));
137 xlp_pci_probe(device_t dev)
141 pcib = device_get_parent(dev);
143 * Only the top level bus has SoC devices, leave the rest to
146 if (strcmp(device_get_nameunit(pcib), "pcib0") != 0)
148 device_set_desc(dev, "XLP SoCbus");
149 return (BUS_PROBE_DEFAULT);
152 static devclass_t pci_devclass;
153 static device_method_t xlp_pci_methods[] = {
154 /* Device interface */
155 DEVMETHOD(device_probe, xlp_pci_probe),
156 DEVMETHOD(device_attach, xlp_pci_attach),
157 DEVMETHOD(bus_rescan, bus_null_rescan),
161 DEFINE_CLASS_1(pci, xlp_pci_driver, xlp_pci_methods, sizeof(struct pci_softc),
163 DRIVER_MODULE(xlp_pci, pcib, xlp_pci_driver, pci_devclass, 0, 0);
166 xlp_pcib_probe(device_t dev)
169 if (ofw_bus_is_compatible(dev, "netlogic,xlp-pci")) {
170 device_set_desc(dev, "XLP PCI bus");
171 return (BUS_PROBE_DEFAULT);
177 xlp_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
181 case PCIB_IVAR_DOMAIN:
192 xlp_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t result)
195 case PCIB_IVAR_DOMAIN:
204 xlp_pcib_maxslots(device_t dev)
207 return (PCI_SLOTMAX);
211 xlp_pcib_read_config(device_t dev, u_int b, u_int s, u_int f,
212 u_int reg, int width)
216 int regindex = reg/sizeof(uint32_t);
218 cfgaddr = nlm_pcicfg_base(XLP_HDR_OFFSET(0, b, s, f));
219 if ((width == 2) && (reg & 1))
221 else if ((width == 4) && (reg & 3))
225 * The intline and int pin of SoC devices are DOA, except
226 * for bridges (slot %8 == 1).
227 * use the values we stashed in a writable PCI scratch reg.
229 if (b == 0 && regindex == 0xf && s % 8 > 1)
230 regindex = XLP_PCI_DEVSCRATCH_REG0;
232 data = nlm_read_pci_reg(cfgaddr, regindex);
234 return ((data >> ((reg & 3) << 3)) & 0xff);
236 return ((data >> ((reg & 3) << 3)) & 0xffff);
242 xlp_pcib_write_config(device_t dev, u_int b, u_int s, u_int f,
243 u_int reg, u_int32_t val, int width)
247 int regindex = reg / sizeof(uint32_t);
249 cfgaddr = nlm_pcicfg_base(XLP_HDR_OFFSET(0, b, s, f));
250 if ((width == 2) && (reg & 1))
252 else if ((width == 4) && (reg & 3))
256 data = nlm_read_pci_reg(cfgaddr, regindex);
257 data = (data & ~(0xff << ((reg & 3) << 3))) |
258 (val << ((reg & 3) << 3));
259 } else if (width == 2) {
260 data = nlm_read_pci_reg(cfgaddr, regindex);
261 data = (data & ~(0xffff << ((reg & 3) << 3))) |
262 (val << ((reg & 3) << 3));
268 * use shadow reg for intpin/intline which are dead
270 if (b == 0 && regindex == 0xf && s % 8 > 1)
271 regindex = XLP_PCI_DEVSCRATCH_REG0;
272 nlm_write_pci_reg(cfgaddr, regindex, data);
276 * Enable byte swap in hardware when compiled big-endian.
277 * Programs a link's PCIe SWAP regions from the link's IO and MEM address
281 xlp_pcib_hardware_swap_enable(int node, int link)
283 #if BYTE_ORDER == BIG_ENDIAN
284 uint64_t bbase, linkpcibase;
288 pcieoffset = XLP_IO_PCIE_OFFSET(node, link);
289 if (!nlm_dev_exists(pcieoffset))
292 bbase = nlm_get_bridge_regbase(node);
293 linkpcibase = nlm_pcicfg_base(pcieoffset);
294 bar = nlm_read_bridge_reg(bbase, BRIDGE_PCIEMEM_BASE0 + link);
295 nlm_write_pci_reg(linkpcibase, PCIE_BYTE_SWAP_MEM_BASE, bar);
297 bar = nlm_read_bridge_reg(bbase, BRIDGE_PCIEMEM_LIMIT0 + link);
298 nlm_write_pci_reg(linkpcibase, PCIE_BYTE_SWAP_MEM_LIM, bar | 0xFFF);
300 bar = nlm_read_bridge_reg(bbase, BRIDGE_PCIEIO_BASE0 + link);
301 nlm_write_pci_reg(linkpcibase, PCIE_BYTE_SWAP_IO_BASE, bar);
303 bar = nlm_read_bridge_reg(bbase, BRIDGE_PCIEIO_LIMIT0 + link);
304 nlm_write_pci_reg(linkpcibase, PCIE_BYTE_SWAP_IO_LIM, bar | 0xFFF);
309 xlp_pcib_attach(device_t dev)
313 /* enable hardware swap on all nodes/links */
314 for (node = 0; node < XLP_MAX_NODES; node++)
315 for (link = 0; link < 4; link++)
316 xlp_pcib_hardware_swap_enable(node, link);
318 device_add_child(dev, "pci", -1);
319 bus_generic_attach(dev);
324 * XLS PCIe can have upto 4 links, and each link has its on IRQ
325 * Find the link on which the device is on
328 xlp_pcie_link(device_t pcib, device_t dev)
330 device_t parent, tmp;
332 /* find the lane on which the slot is connected to */
335 parent = device_get_parent(tmp);
336 if (parent == NULL || parent == pcib) {
337 device_printf(dev, "Cannot find parent bus\n");
340 if (strcmp(device_get_nameunit(parent), "pci0") == 0)
344 return (pci_get_function(tmp));
348 xlp_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs)
353 * Each link has 32 MSIs that can be allocated, but for now
354 * we only support one device per link.
355 * msi_alloc() equivalent is needed when we start supporting
356 * bridges on the PCIe link.
358 link = xlp_pcie_link(pcib, dev);
363 * encode the irq so that we know it is a MSI interrupt when we
366 for (i = 0; i < count; i++)
367 irqs[i] = 64 + link * 32 + i;
373 xlp_release_msi(device_t pcib, device_t dev, int count, int *irqs)
379 xlp_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr,
385 device_printf(dev, "%s: map_msi for irq %d - ignored",
386 device_get_nameunit(pcib), irq);
389 link = (irq - 64) / 32;
390 *addr = MIPS_MSI_ADDR(0);
391 *data = MIPS_MSI_DATA(PIC_PCIE_IRQ(link));
396 bridge_pcie_ack(int irq, void *arg)
402 reg = PCIE_MSI_STATUS;
406 base = nlm_pcicfg_base(XLP_IO_PCIE0_OFFSET(node));
409 base = nlm_pcicfg_base(XLP_IO_PCIE1_OFFSET(node));
412 base = nlm_pcicfg_base(XLP_IO_PCIE2_OFFSET(node));
415 base = nlm_pcicfg_base(XLP_IO_PCIE3_OFFSET(node));
421 nlm_write_pci_reg(base, reg, 0xFFFFFFFF);
426 mips_platform_pcib_setup_intr(device_t dev, device_t child,
427 struct resource *irq, int flags, driver_filter_t *filt,
428 driver_intr_t *intr, void *arg, void **cookiep)
433 error = rman_activate_resource(irq);
436 if (rman_get_start(irq) != rman_get_end(irq)) {
437 device_printf(dev, "Interrupt allocation %ju != %ju\n",
438 rman_get_start(irq), rman_get_end(irq));
441 xlpirq = rman_get_start(irq);
445 if (strcmp(device_get_name(dev), "pcib") != 0)
449 * temporary hack for MSI, we support just one device per
450 * link, and assign the link interrupt to the device interrupt
457 if (xlpirq % 32 != 0)
462 base = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node,link));
464 /* MSI Interrupt Vector enable at bridge's configuration */
465 nlm_write_pci_reg(base, PCIE_MSI_EN, PCIE_MSI_VECTOR_INT_EN);
467 val = nlm_read_pci_reg(base, PCIE_INT_EN0);
468 /* MSI Interrupt enable at bridge's configuration */
469 nlm_write_pci_reg(base, PCIE_INT_EN0,
470 (val | PCIE_MSI_INT_EN));
472 /* legacy interrupt disable at bridge */
473 val = nlm_read_pci_reg(base, PCIE_BRIDGE_CMD);
474 nlm_write_pci_reg(base, PCIE_BRIDGE_CMD,
475 (val | PCIM_CMD_INTxDIS));
477 /* MSI address update at bridge */
478 nlm_write_pci_reg(base, PCIE_BRIDGE_MSI_ADDRL,
480 nlm_write_pci_reg(base, PCIE_BRIDGE_MSI_ADDRH, 0);
482 val = nlm_read_pci_reg(base, PCIE_BRIDGE_MSI_CAP);
483 /* MSI capability enable at bridge */
484 nlm_write_pci_reg(base, PCIE_BRIDGE_MSI_CAP,
485 (val | (PCIM_MSICTRL_MSI_ENABLE << 16) |
486 (PCIM_MSICTRL_MMC_32 << 16)));
487 xlpirq = PIC_PCIE_IRQ(link);
490 /* if it is for real PCIe, we need to ack at bridge too */
491 if (xlpirq >= PIC_PCIE_IRQ(0) && xlpirq <= PIC_PCIE_IRQ(3))
492 xlp_set_bus_ack(xlpirq, bridge_pcie_ack, NULL);
493 cpu_establish_hardintr(device_get_name(child), filt, intr, arg,
494 xlpirq, flags, cookiep);
500 mips_platform_pcib_teardown_intr(device_t dev, device_t child,
501 struct resource *irq, void *cookie)
503 if (strcmp(device_get_name(child), "pci") == 0) {
504 /* if needed reprogram the pic to clear pcix related entry */
505 device_printf(dev, "teardown intr\n");
507 return (bus_generic_teardown_intr(dev, child, irq, cookie));
511 mips_pcib_route_interrupt(device_t bus, device_t dev, int pin)
516 * Validate requested pin number.
518 if ((pin < 1) || (pin > 4))
521 if (pci_get_bus(dev) == 0 &&
522 pci_get_vendor(dev) == PCI_VENDOR_NETLOGIC) {
523 f = pci_get_function(dev);
524 d = pci_get_slot(dev) % 8;
527 * For PCIe links, return link IRT, for other SoC devices
528 * get the IRT from its PCIe header
531 return (PIC_PCIE_IRQ(f));
533 return (255); /* use intline, don't reroute */
535 /* Regular PCI devices */
536 return (PIC_PCIE_IRQ(xlp_pcie_link(bus, dev)));
540 static device_method_t xlp_pcib_methods[] = {
541 /* Device interface */
542 DEVMETHOD(device_probe, xlp_pcib_probe),
543 DEVMETHOD(device_attach, xlp_pcib_attach),
546 DEVMETHOD(bus_read_ivar, xlp_pcib_read_ivar),
547 DEVMETHOD(bus_write_ivar, xlp_pcib_write_ivar),
548 DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
549 DEVMETHOD(bus_release_resource, bus_generic_release_resource),
550 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
551 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
552 DEVMETHOD(bus_setup_intr, mips_platform_pcib_setup_intr),
553 DEVMETHOD(bus_teardown_intr, mips_platform_pcib_teardown_intr),
556 DEVMETHOD(pcib_maxslots, xlp_pcib_maxslots),
557 DEVMETHOD(pcib_read_config, xlp_pcib_read_config),
558 DEVMETHOD(pcib_write_config, xlp_pcib_write_config),
559 DEVMETHOD(pcib_route_interrupt, mips_pcib_route_interrupt),
561 DEVMETHOD(pcib_alloc_msi, xlp_alloc_msi),
562 DEVMETHOD(pcib_release_msi, xlp_release_msi),
563 DEVMETHOD(pcib_map_msi, xlp_map_msi),
568 static driver_t xlp_pcib_driver = {
574 static devclass_t pcib_devclass;
575 DRIVER_MODULE(xlp_pcib, simplebus, xlp_pcib_driver, pcib_devclass, 0, 0);