2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 1990, 1991, 1993
5 * The Regents of the University of California. All rights reserved.
6 * Copyright (c) 2019 Andrey V. Elsukov <ae@FreeBSD.org>
8 * This code is derived from the Stanford/CMU enet packet filter,
9 * (net/enet.c) distributed as part of 4.3BSD, and code contributed
10 * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
11 * Berkeley Laboratory.
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
16 * 1. Redistributions of source code must retain the above copyright
17 * notice, this list of conditions and the following disclaimer.
18 * 2. Redistributions in binary form must reproduce the above copyright
19 * notice, this list of conditions and the following disclaimer in the
20 * documentation and/or other materials provided with the distribution.
21 * 3. Neither the name of the University nor the names of its contributors
22 * may be used to endorse or promote products derived from this software
23 * without specific prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * @(#)bpf.c 8.4 (Berkeley) 1/9/95
40 #include <sys/cdefs.h>
41 __FBSDID("$FreeBSD$");
45 #include "opt_netgraph.h"
47 #include <sys/param.h>
49 #include <sys/eventhandler.h>
50 #include <sys/fcntl.h>
54 #include <sys/malloc.h>
56 #include <sys/mutex.h>
60 #include <sys/signalvar.h>
61 #include <sys/filio.h>
62 #include <sys/sockio.h>
63 #include <sys/ttycom.h>
65 #include <sys/sysent.h>
66 #include <sys/systm.h>
68 #include <sys/event.h>
73 #include <sys/socket.h>
80 #include <net/if_var.h>
81 #include <net/if_dl.h>
83 #include <net/bpf_buffer.h>
85 #include <net/bpf_jitter.h>
87 #include <net/bpf_zerocopy.h>
88 #include <net/bpfdesc.h>
89 #include <net/route.h>
92 #include <netinet/in.h>
93 #include <netinet/if_ether.h>
94 #include <sys/kernel.h>
95 #include <sys/sysctl.h>
97 #include <net80211/ieee80211_freebsd.h>
99 #include <security/mac/mac_framework.h>
101 MALLOC_DEFINE(M_BPF, "BPF", "BPF data");
103 static struct bpf_if_ext dead_bpf_if = {
104 .bif_dlist = CK_LIST_HEAD_INITIALIZER()
108 #define bif_next bif_ext.bif_next
109 #define bif_dlist bif_ext.bif_dlist
110 struct bpf_if_ext bif_ext; /* public members */
111 u_int bif_dlt; /* link layer type */
112 u_int bif_hdrlen; /* length of link header */
113 struct bpfd_list bif_wlist; /* writer-only list */
114 struct ifnet *bif_ifp; /* corresponding interface */
115 struct bpf_if **bif_bpf; /* Pointer to pointer to us */
116 volatile u_int bif_refcnt;
117 struct epoch_context epoch_ctx;
120 CTASSERT(offsetof(struct bpf_if, bif_ext) == 0);
122 struct bpf_program_buffer {
123 struct epoch_context epoch_ctx;
125 bpf_jit_filter *func;
130 #if defined(DEV_BPF) || defined(NETGRAPH_BPF)
132 #define PRINET 26 /* interruptible */
134 #define SIZEOF_BPF_HDR(type) \
135 (offsetof(type, bh_hdrlen) + sizeof(((type *)0)->bh_hdrlen))
137 #ifdef COMPAT_FREEBSD32
138 #include <sys/mount.h>
139 #include <compat/freebsd32/freebsd32.h>
140 #define BPF_ALIGNMENT32 sizeof(int32_t)
141 #define BPF_WORDALIGN32(x) roundup2(x, BPF_ALIGNMENT32)
145 * 32-bit version of structure prepended to each packet. We use this header
146 * instead of the standard one for 32-bit streams. We mark the a stream as
147 * 32-bit the first time we see a 32-bit compat ioctl request.
150 struct timeval32 bh_tstamp; /* time stamp */
151 uint32_t bh_caplen; /* length of captured portion */
152 uint32_t bh_datalen; /* original length of packet */
153 uint16_t bh_hdrlen; /* length of bpf header (this struct
154 plus alignment padding) */
158 struct bpf_program32 {
163 struct bpf_dltlist32 {
168 #define BIOCSETF32 _IOW('B', 103, struct bpf_program32)
169 #define BIOCSRTIMEOUT32 _IOW('B', 109, struct timeval32)
170 #define BIOCGRTIMEOUT32 _IOR('B', 110, struct timeval32)
171 #define BIOCGDLTLIST32 _IOWR('B', 121, struct bpf_dltlist32)
172 #define BIOCSETWF32 _IOW('B', 123, struct bpf_program32)
173 #define BIOCSETFNR32 _IOW('B', 130, struct bpf_program32)
176 #define BPF_LOCK() sx_xlock(&bpf_sx)
177 #define BPF_UNLOCK() sx_xunlock(&bpf_sx)
178 #define BPF_LOCK_ASSERT() sx_assert(&bpf_sx, SA_XLOCKED)
180 * bpf_iflist is a list of BPF interface structures, each corresponding to a
181 * specific DLT. The same network interface might have several BPF interface
182 * structures registered by different layers in the stack (i.e., 802.11
183 * frames, ethernet frames, etc).
185 CK_LIST_HEAD(bpf_iflist, bpf_if);
186 static struct bpf_iflist bpf_iflist;
187 static struct sx bpf_sx; /* bpf global lock */
188 static int bpf_bpfd_cnt;
190 static void bpfif_ref(struct bpf_if *);
191 static void bpfif_rele(struct bpf_if *);
193 static void bpfd_ref(struct bpf_d *);
194 static void bpfd_rele(struct bpf_d *);
195 static void bpf_attachd(struct bpf_d *, struct bpf_if *);
196 static void bpf_detachd(struct bpf_d *);
197 static void bpf_detachd_locked(struct bpf_d *, bool);
198 static void bpfd_free(epoch_context_t);
199 static int bpf_movein(struct uio *, int, struct ifnet *, struct mbuf **,
200 struct sockaddr *, int *, struct bpf_d *);
201 static int bpf_setif(struct bpf_d *, struct ifreq *);
202 static void bpf_timed_out(void *);
204 bpf_wakeup(struct bpf_d *);
205 static void catchpacket(struct bpf_d *, u_char *, u_int, u_int,
206 void (*)(struct bpf_d *, caddr_t, u_int, void *, u_int),
208 static void reset_d(struct bpf_d *);
209 static int bpf_setf(struct bpf_d *, struct bpf_program *, u_long cmd);
210 static int bpf_getdltlist(struct bpf_d *, struct bpf_dltlist *);
211 static int bpf_setdlt(struct bpf_d *, u_int);
212 static void filt_bpfdetach(struct knote *);
213 static int filt_bpfread(struct knote *, long);
214 static void bpf_drvinit(void *);
215 static int bpf_stats_sysctl(SYSCTL_HANDLER_ARGS);
217 SYSCTL_NODE(_net, OID_AUTO, bpf, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
219 int bpf_maxinsns = BPF_MAXINSNS;
220 SYSCTL_INT(_net_bpf, OID_AUTO, maxinsns, CTLFLAG_RW,
221 &bpf_maxinsns, 0, "Maximum bpf program instructions");
222 static int bpf_zerocopy_enable = 0;
223 SYSCTL_INT(_net_bpf, OID_AUTO, zerocopy_enable, CTLFLAG_RW,
224 &bpf_zerocopy_enable, 0, "Enable new zero-copy BPF buffer sessions");
225 static SYSCTL_NODE(_net_bpf, OID_AUTO, stats, CTLFLAG_MPSAFE | CTLFLAG_RW,
226 bpf_stats_sysctl, "bpf statistics portal");
228 VNET_DEFINE_STATIC(int, bpf_optimize_writers) = 0;
229 #define V_bpf_optimize_writers VNET(bpf_optimize_writers)
230 SYSCTL_INT(_net_bpf, OID_AUTO, optimize_writers, CTLFLAG_VNET | CTLFLAG_RWTUN,
231 &VNET_NAME(bpf_optimize_writers), 0,
232 "Do not send packets until BPF program is set");
234 static d_open_t bpfopen;
235 static d_read_t bpfread;
236 static d_write_t bpfwrite;
237 static d_ioctl_t bpfioctl;
238 static d_poll_t bpfpoll;
239 static d_kqfilter_t bpfkqfilter;
241 static struct cdevsw bpf_cdevsw = {
242 .d_version = D_VERSION,
249 .d_kqfilter = bpfkqfilter,
252 static struct filterops bpfread_filtops = {
254 .f_detach = filt_bpfdetach,
255 .f_event = filt_bpfread,
259 * LOCKING MODEL USED BY BPF
262 * 1) global lock (BPF_LOCK). Sx, used to protect some global counters,
263 * every bpf_iflist changes, serializes ioctl access to bpf descriptors.
264 * 2) Descriptor lock. Mutex, used to protect BPF buffers and various
265 * structure fields used by bpf_*tap* code.
267 * Lock order: global lock, then descriptor lock.
269 * There are several possible consumers:
271 * 1. The kernel registers interface pointer with bpfattach().
272 * Each call allocates new bpf_if structure, references ifnet pointer
273 * and links bpf_if into bpf_iflist chain. This is protected with global
276 * 2. An userland application uses ioctl() call to bpf_d descriptor.
277 * All such call are serialized with global lock. BPF filters can be
278 * changed, but pointer to old filter will be freed using NET_EPOCH_CALL().
279 * Thus it should be safe for bpf_tap/bpf_mtap* code to do access to
280 * filter pointers, even if change will happen during bpf_tap execution.
281 * Destroying of bpf_d descriptor also is doing using NET_EPOCH_CALL().
283 * 3. An userland application can write packets into bpf_d descriptor.
284 * There we need to be sure, that ifnet won't disappear during bpfwrite().
286 * 4. The kernel invokes bpf_tap/bpf_mtap* functions. The access to
287 * bif_dlist is protected with net_epoch_preempt section. So, it should
288 * be safe to make access to bpf_d descriptor inside the section.
290 * 5. The kernel invokes bpfdetach() on interface destroying. All lists
291 * are modified with global lock held and actual free() is done using
296 bpfif_free(epoch_context_t ctx)
300 bp = __containerof(ctx, struct bpf_if, epoch_ctx);
301 if_rele(bp->bif_ifp);
306 bpfif_ref(struct bpf_if *bp)
309 refcount_acquire(&bp->bif_refcnt);
313 bpfif_rele(struct bpf_if *bp)
316 if (!refcount_release(&bp->bif_refcnt))
318 NET_EPOCH_CALL(bpfif_free, &bp->epoch_ctx);
322 bpfd_ref(struct bpf_d *d)
325 refcount_acquire(&d->bd_refcnt);
329 bpfd_rele(struct bpf_d *d)
332 if (!refcount_release(&d->bd_refcnt))
334 NET_EPOCH_CALL(bpfd_free, &d->epoch_ctx);
337 static struct bpf_program_buffer*
338 bpf_program_buffer_alloc(size_t size, int flags)
341 return (malloc(sizeof(struct bpf_program_buffer) + size,
346 bpf_program_buffer_free(epoch_context_t ctx)
348 struct bpf_program_buffer *ptr;
350 ptr = __containerof(ctx, struct bpf_program_buffer, epoch_ctx);
352 if (ptr->func != NULL)
353 bpf_destroy_jit_filter(ptr->func);
359 * Wrapper functions for various buffering methods. If the set of buffer
360 * modes expands, we will probably want to introduce a switch data structure
361 * similar to protosw, et.
364 bpf_append_bytes(struct bpf_d *d, caddr_t buf, u_int offset, void *src,
370 switch (d->bd_bufmode) {
371 case BPF_BUFMODE_BUFFER:
372 return (bpf_buffer_append_bytes(d, buf, offset, src, len));
374 case BPF_BUFMODE_ZBUF:
375 counter_u64_add(d->bd_zcopy, 1);
376 return (bpf_zerocopy_append_bytes(d, buf, offset, src, len));
379 panic("bpf_buf_append_bytes");
384 bpf_append_mbuf(struct bpf_d *d, caddr_t buf, u_int offset, void *src,
390 switch (d->bd_bufmode) {
391 case BPF_BUFMODE_BUFFER:
392 return (bpf_buffer_append_mbuf(d, buf, offset, src, len));
394 case BPF_BUFMODE_ZBUF:
395 counter_u64_add(d->bd_zcopy, 1);
396 return (bpf_zerocopy_append_mbuf(d, buf, offset, src, len));
399 panic("bpf_buf_append_mbuf");
404 * This function gets called when the free buffer is re-assigned.
407 bpf_buf_reclaimed(struct bpf_d *d)
412 switch (d->bd_bufmode) {
413 case BPF_BUFMODE_BUFFER:
416 case BPF_BUFMODE_ZBUF:
417 bpf_zerocopy_buf_reclaimed(d);
421 panic("bpf_buf_reclaimed");
426 * If the buffer mechanism has a way to decide that a held buffer can be made
427 * free, then it is exposed via the bpf_canfreebuf() interface. (1) is
428 * returned if the buffer can be discarded, (0) is returned if it cannot.
431 bpf_canfreebuf(struct bpf_d *d)
436 switch (d->bd_bufmode) {
437 case BPF_BUFMODE_ZBUF:
438 return (bpf_zerocopy_canfreebuf(d));
444 * Allow the buffer model to indicate that the current store buffer is
445 * immutable, regardless of the appearance of space. Return (1) if the
446 * buffer is writable, and (0) if not.
449 bpf_canwritebuf(struct bpf_d *d)
453 switch (d->bd_bufmode) {
454 case BPF_BUFMODE_ZBUF:
455 return (bpf_zerocopy_canwritebuf(d));
461 * Notify buffer model that an attempt to write to the store buffer has
462 * resulted in a dropped packet, in which case the buffer may be considered
466 bpf_buffull(struct bpf_d *d)
471 switch (d->bd_bufmode) {
472 case BPF_BUFMODE_ZBUF:
473 bpf_zerocopy_buffull(d);
479 * Notify the buffer model that a buffer has moved into the hold position.
482 bpf_bufheld(struct bpf_d *d)
487 switch (d->bd_bufmode) {
488 case BPF_BUFMODE_ZBUF:
489 bpf_zerocopy_bufheld(d);
495 bpf_free(struct bpf_d *d)
498 switch (d->bd_bufmode) {
499 case BPF_BUFMODE_BUFFER:
500 return (bpf_buffer_free(d));
502 case BPF_BUFMODE_ZBUF:
503 return (bpf_zerocopy_free(d));
506 panic("bpf_buf_free");
511 bpf_uiomove(struct bpf_d *d, caddr_t buf, u_int len, struct uio *uio)
514 if (d->bd_bufmode != BPF_BUFMODE_BUFFER)
516 return (bpf_buffer_uiomove(d, buf, len, uio));
520 bpf_ioctl_sblen(struct bpf_d *d, u_int *i)
523 if (d->bd_bufmode != BPF_BUFMODE_BUFFER)
525 return (bpf_buffer_ioctl_sblen(d, i));
529 bpf_ioctl_getzmax(struct thread *td, struct bpf_d *d, size_t *i)
532 if (d->bd_bufmode != BPF_BUFMODE_ZBUF)
534 return (bpf_zerocopy_ioctl_getzmax(td, d, i));
538 bpf_ioctl_rotzbuf(struct thread *td, struct bpf_d *d, struct bpf_zbuf *bz)
541 if (d->bd_bufmode != BPF_BUFMODE_ZBUF)
543 return (bpf_zerocopy_ioctl_rotzbuf(td, d, bz));
547 bpf_ioctl_setzbuf(struct thread *td, struct bpf_d *d, struct bpf_zbuf *bz)
550 if (d->bd_bufmode != BPF_BUFMODE_ZBUF)
552 return (bpf_zerocopy_ioctl_setzbuf(td, d, bz));
556 * General BPF functions.
559 bpf_movein(struct uio *uio, int linktype, struct ifnet *ifp, struct mbuf **mp,
560 struct sockaddr *sockp, int *hdrlen, struct bpf_d *d)
562 const struct ieee80211_bpf_params *p;
563 struct ether_header *eh;
571 * Build a sockaddr based on the data link layer type.
572 * We do this at this level because the ethernet header
573 * is copied directly into the data field of the sockaddr.
574 * In the case of SLIP, there is no header and the packet
575 * is forwarded as is.
576 * Also, we are careful to leave room at the front of the mbuf
577 * for the link level header.
581 sockp->sa_family = AF_INET;
586 sockp->sa_family = AF_UNSPEC;
587 /* XXX Would MAXLINKHDR be better? */
588 hlen = ETHER_HDR_LEN;
592 sockp->sa_family = AF_IMPLINK;
597 sockp->sa_family = AF_UNSPEC;
603 * null interface types require a 4 byte pseudo header which
604 * corresponds to the address family of the packet.
606 sockp->sa_family = AF_UNSPEC;
610 case DLT_ATM_RFC1483:
612 * en atm driver requires 4-byte atm pseudo header.
613 * though it isn't standard, vpi:vci needs to be
616 sockp->sa_family = AF_UNSPEC;
617 hlen = 12; /* XXX 4(ATM_PH) + 3(LLC) + 5(SNAP) */
621 sockp->sa_family = AF_UNSPEC;
622 hlen = 4; /* This should match PPP_HDRLEN */
625 case DLT_IEEE802_11: /* IEEE 802.11 wireless */
626 sockp->sa_family = AF_IEEE80211;
630 case DLT_IEEE802_11_RADIO: /* IEEE 802.11 wireless w/ phy params */
631 sockp->sa_family = AF_IEEE80211;
632 sockp->sa_len = 12; /* XXX != 0 */
633 hlen = sizeof(struct ieee80211_bpf_params);
640 len = uio->uio_resid;
641 if (len < hlen || len - hlen > ifp->if_mtu)
644 /* Allocate a mbuf for our write, since m_get2 fails if len >= to MJUMPAGESIZE, use m_getjcl for bigger buffers */
645 if (len < MJUMPAGESIZE)
646 m = m_get2(len, M_WAITOK, MT_DATA, M_PKTHDR);
647 else if (len <= MJUM9BYTES)
648 m = m_getjcl(M_WAITOK, MT_DATA, M_PKTHDR, MJUM9BYTES);
649 else if (len <= MJUM16BYTES)
650 m = m_getjcl(M_WAITOK, MT_DATA, M_PKTHDR, MJUM16BYTES);
655 m->m_pkthdr.len = m->m_len = len;
658 error = uiomove(mtod(m, u_char *), len, uio);
662 slen = bpf_filter(d->bd_wfilter, mtod(m, u_char *), len, len);
668 /* Check for multicast destination */
671 eh = mtod(m, struct ether_header *);
672 if (ETHER_IS_MULTICAST(eh->ether_dhost)) {
673 if (bcmp(ifp->if_broadcastaddr, eh->ether_dhost,
674 ETHER_ADDR_LEN) == 0)
675 m->m_flags |= M_BCAST;
677 m->m_flags |= M_MCAST;
679 if (d->bd_hdrcmplt == 0) {
680 memcpy(eh->ether_shost, IF_LLADDR(ifp),
681 sizeof(eh->ether_shost));
687 * Make room for link header, and copy it to sockaddr
690 if (sockp->sa_family == AF_IEEE80211) {
692 * Collect true length from the parameter header
693 * NB: sockp is known to be zero'd so if we do a
694 * short copy unspecified parameters will be
696 * NB: packet may not be aligned after stripping
700 p = mtod(m, const struct ieee80211_bpf_params *);
702 if (hlen > sizeof(sockp->sa_data)) {
707 bcopy(mtod(m, const void *), sockp->sa_data, hlen);
718 * Attach descriptor to the bpf interface, i.e. make d listen on bp,
719 * then reset its buffers and counters with reset_d().
722 bpf_attachd(struct bpf_d *d, struct bpf_if *bp)
729 * Save sysctl value to protect from sysctl change
732 op_w = V_bpf_optimize_writers || d->bd_writer;
734 if (d->bd_bif != NULL)
735 bpf_detachd_locked(d, false);
737 * Point d at bp, and add d to the interface's list.
738 * Since there are many applications using BPF for
739 * sending raw packets only (dhcpd, cdpd are good examples)
740 * we can delay adding d to the list of active listeners until
741 * some filter is configured.
746 * Hold reference to bpif while descriptor uses this interface.
751 /* Add to writers-only list */
752 CK_LIST_INSERT_HEAD(&bp->bif_wlist, d, bd_next);
754 * We decrement bd_writer on every filter set operation.
755 * First BIOCSETF is done by pcap_open_live() to set up
756 * snap length. After that appliation usually sets its own
761 CK_LIST_INSERT_HEAD(&bp->bif_dlist, d, bd_next);
767 CTR3(KTR_NET, "%s: bpf_attach called by pid %d, adding to %s list",
768 __func__, d->bd_pid, d->bd_writer ? "writer" : "active");
771 EVENTHANDLER_INVOKE(bpf_track, bp->bif_ifp, bp->bif_dlt, 1);
775 * Check if we need to upgrade our descriptor @d from write-only mode.
778 bpf_check_upgrade(u_long cmd, struct bpf_d *d, struct bpf_insn *fcode,
781 int is_snap, need_upgrade;
784 * Check if we've already upgraded or new filter is empty.
786 if (d->bd_writer == 0 || fcode == NULL)
792 * Check if cmd looks like snaplen setting from
793 * pcap_bpf.c:pcap_open_live().
794 * Note we're not checking .k value here:
795 * while pcap_open_live() definitely sets to non-zero value,
796 * we'd prefer to treat k=0 (deny ALL) case the same way: e.g.
797 * do not consider upgrading immediately
799 if (cmd == BIOCSETF && flen == 1 &&
800 fcode[0].code == (BPF_RET | BPF_K))
807 * We're setting first filter and it doesn't look like
808 * setting snaplen. We're probably using bpf directly.
809 * Upgrade immediately.
814 * Do not require upgrade by first BIOCSETF
815 * (used to set snaplen) by pcap_open_live().
818 if (--d->bd_writer == 0) {
820 * First snaplen filter has already
821 * been set. This is probably catch-all
829 "%s: filter function set by pid %d, "
830 "bd_writer counter %d, snap %d upgrade %d",
831 __func__, d->bd_pid, d->bd_writer,
832 is_snap, need_upgrade);
834 return (need_upgrade);
838 * Detach a file from its interface.
841 bpf_detachd(struct bpf_d *d)
844 bpf_detachd_locked(d, false);
849 bpf_detachd_locked(struct bpf_d *d, bool detached_ifp)
856 CTR2(KTR_NET, "%s: detach required by pid %d", __func__, d->bd_pid);
858 /* Check if descriptor is attached */
859 if ((bp = d->bd_bif) == NULL)
863 /* Remove d from the interface's descriptor list. */
864 CK_LIST_REMOVE(d, bd_next);
865 /* Save bd_writer value */
866 error = d->bd_writer;
871 * Notify descriptor as it's detached, so that any
872 * sleepers wake up and get ENXIO.
879 /* Call event handler iff d is attached */
881 EVENTHANDLER_INVOKE(bpf_track, ifp, bp->bif_dlt, 0);
884 * Check if this descriptor had requested promiscuous mode.
885 * If so and ifnet is not detached, turn it off.
887 if (d->bd_promisc && !detached_ifp) {
889 CURVNET_SET(ifp->if_vnet);
890 error = ifpromisc(ifp, 0);
892 if (error != 0 && error != ENXIO) {
894 * ENXIO can happen if a pccard is unplugged
895 * Something is really wrong if we were able to put
896 * the driver into promiscuous mode, but can't
899 if_printf(bp->bif_ifp,
900 "bpf_detach: ifpromisc failed (%d)\n", error);
907 * Close the descriptor by detaching it from its interface,
908 * deallocating its buffers, and marking it free.
913 struct bpf_d *d = data;
916 if (d->bd_state == BPF_WAITING)
917 callout_stop(&d->bd_callout);
918 d->bd_state = BPF_IDLE;
920 funsetown(&d->bd_sigio);
923 mac_bpfdesc_destroy(d);
925 seldrain(&d->bd_sel);
926 knlist_destroy(&d->bd_sel.si_note);
927 callout_drain(&d->bd_callout);
932 * Open ethernet device. Returns ENXIO for illegal minor device number,
933 * EBUSY if file is open by another process.
937 bpfopen(struct cdev *dev, int flags, int fmt, struct thread *td)
942 d = malloc(sizeof(*d), M_BPF, M_WAITOK | M_ZERO);
943 error = devfs_set_cdevpriv(d, bpf_dtor);
950 d->bd_rcount = counter_u64_alloc(M_WAITOK);
951 d->bd_dcount = counter_u64_alloc(M_WAITOK);
952 d->bd_fcount = counter_u64_alloc(M_WAITOK);
953 d->bd_wcount = counter_u64_alloc(M_WAITOK);
954 d->bd_wfcount = counter_u64_alloc(M_WAITOK);
955 d->bd_wdcount = counter_u64_alloc(M_WAITOK);
956 d->bd_zcopy = counter_u64_alloc(M_WAITOK);
959 * For historical reasons, perform a one-time initialization call to
960 * the buffer routines, even though we're not yet committed to a
961 * particular buffer method.
964 if ((flags & FREAD) == 0)
966 d->bd_hbuf_in_use = 0;
967 d->bd_bufmode = BPF_BUFMODE_BUFFER;
969 d->bd_direction = BPF_D_INOUT;
971 BPF_PID_REFRESH(d, td);
974 mac_bpfdesc_create(td->td_ucred, d);
976 mtx_init(&d->bd_lock, devtoname(dev), "bpf cdev lock", MTX_DEF);
977 callout_init_mtx(&d->bd_callout, &d->bd_lock, 0);
978 knlist_init_mtx(&d->bd_sel.si_note, &d->bd_lock);
984 * bpfread - read next chunk of packets from buffers
987 bpfread(struct cdev *dev, struct uio *uio, int ioflag)
994 error = devfs_get_cdevpriv((void **)&d);
999 * Restrict application to use a buffer the same size as
1000 * as kernel buffers.
1002 if (uio->uio_resid != d->bd_bufsize)
1005 non_block = ((ioflag & O_NONBLOCK) != 0);
1008 BPF_PID_REFRESH_CUR(d);
1009 if (d->bd_bufmode != BPF_BUFMODE_BUFFER) {
1011 return (EOPNOTSUPP);
1013 if (d->bd_state == BPF_WAITING)
1014 callout_stop(&d->bd_callout);
1015 timed_out = (d->bd_state == BPF_TIMED_OUT);
1016 d->bd_state = BPF_IDLE;
1017 while (d->bd_hbuf_in_use) {
1018 error = mtx_sleep(&d->bd_hbuf_in_use, &d->bd_lock,
1019 PRINET|PCATCH, "bd_hbuf", 0);
1026 * If the hold buffer is empty, then do a timed sleep, which
1027 * ends when the timeout expires or when enough packets
1028 * have arrived to fill the store buffer.
1030 while (d->bd_hbuf == NULL) {
1031 if (d->bd_slen != 0) {
1033 * A packet(s) either arrived since the previous
1034 * read or arrived while we were asleep.
1036 if (d->bd_immediate || non_block || timed_out) {
1038 * Rotate the buffers and return what's here
1039 * if we are in immediate mode, non-blocking
1040 * flag is set, or this descriptor timed out.
1048 * No data is available, check to see if the bpf device
1049 * is still pointed at a real interface. If not, return
1050 * ENXIO so that the userland process knows to rebind
1051 * it before using it again.
1053 if (d->bd_bif == NULL) {
1060 return (EWOULDBLOCK);
1062 error = msleep(d, &d->bd_lock, PRINET|PCATCH,
1063 "bpf", d->bd_rtout);
1064 if (error == EINTR || error == ERESTART) {
1068 if (error == EWOULDBLOCK) {
1070 * On a timeout, return what's in the buffer,
1071 * which may be nothing. If there is something
1072 * in the store buffer, we can rotate the buffers.
1076 * We filled up the buffer in between
1077 * getting the timeout and arriving
1078 * here, so we don't need to rotate.
1082 if (d->bd_slen == 0) {
1091 * At this point, we know we have something in the hold slot.
1093 d->bd_hbuf_in_use = 1;
1097 * Move data from hold buffer into user space.
1098 * We know the entire buffer is transferred since
1099 * we checked above that the read buffer is bpf_bufsize bytes.
1101 * We do not have to worry about simultaneous reads because
1102 * we waited for sole access to the hold buffer above.
1104 error = bpf_uiomove(d, d->bd_hbuf, d->bd_hlen, uio);
1107 KASSERT(d->bd_hbuf != NULL, ("bpfread: lost bd_hbuf"));
1108 d->bd_fbuf = d->bd_hbuf;
1111 bpf_buf_reclaimed(d);
1112 d->bd_hbuf_in_use = 0;
1113 wakeup(&d->bd_hbuf_in_use);
1120 * If there are processes sleeping on this descriptor, wake them up.
1122 static __inline void
1123 bpf_wakeup(struct bpf_d *d)
1126 BPFD_LOCK_ASSERT(d);
1127 if (d->bd_state == BPF_WAITING) {
1128 callout_stop(&d->bd_callout);
1129 d->bd_state = BPF_IDLE;
1132 if (d->bd_async && d->bd_sig && d->bd_sigio)
1133 pgsigio(&d->bd_sigio, d->bd_sig, 0);
1135 selwakeuppri(&d->bd_sel, PRINET);
1136 KNOTE_LOCKED(&d->bd_sel.si_note, 0);
1140 bpf_timed_out(void *arg)
1142 struct bpf_d *d = (struct bpf_d *)arg;
1144 BPFD_LOCK_ASSERT(d);
1146 if (callout_pending(&d->bd_callout) ||
1147 !callout_active(&d->bd_callout))
1149 if (d->bd_state == BPF_WAITING) {
1150 d->bd_state = BPF_TIMED_OUT;
1151 if (d->bd_slen != 0)
1157 bpf_ready(struct bpf_d *d)
1160 BPFD_LOCK_ASSERT(d);
1162 if (!bpf_canfreebuf(d) && d->bd_hlen != 0)
1164 if ((d->bd_immediate || d->bd_state == BPF_TIMED_OUT) &&
1171 bpfwrite(struct cdev *dev, struct uio *uio, int ioflag)
1174 struct sockaddr dst;
1175 struct epoch_tracker et;
1179 struct mbuf *m, *mc;
1182 error = devfs_get_cdevpriv((void **)&d);
1186 NET_EPOCH_ENTER(et);
1188 BPF_PID_REFRESH_CUR(d);
1189 counter_u64_add(d->bd_wcount, 1);
1190 if ((bp = d->bd_bif) == NULL) {
1196 if ((ifp->if_flags & IFF_UP) == 0) {
1201 if (uio->uio_resid == 0)
1204 bzero(&dst, sizeof(dst));
1209 * Take extra reference, unlock d and exit from epoch section,
1210 * since bpf_movein() can sleep.
1216 error = bpf_movein(uio, (int)bp->bif_dlt, ifp,
1217 &m, &dst, &hlen, d);
1220 counter_u64_add(d->bd_wdcount, 1);
1227 * Check that descriptor is still attached to the interface.
1228 * This can happen on bpfdetach(). To avoid access to detached
1229 * ifnet, free mbuf and return ENXIO.
1231 if (d->bd_bif == NULL) {
1232 counter_u64_add(d->bd_wdcount, 1);
1238 counter_u64_add(d->bd_wfcount, 1);
1240 dst.sa_family = pseudo_AF_HDRCMPLT;
1242 if (d->bd_feedback) {
1243 mc = m_dup(m, M_NOWAIT);
1245 mc->m_pkthdr.rcvif = ifp;
1246 /* Set M_PROMISC for outgoing packets to be discarded. */
1247 if (d->bd_direction == BPF_D_INOUT)
1248 m->m_flags |= M_PROMISC;
1252 m->m_pkthdr.len -= hlen;
1254 m->m_data += hlen; /* XXX */
1256 CURVNET_SET(ifp->if_vnet);
1258 mac_bpfdesc_create_mbuf(d, m);
1260 mac_bpfdesc_create_mbuf(d, mc);
1263 bzero(&ro, sizeof(ro));
1265 ro.ro_prepend = (u_char *)&dst.sa_data;
1267 ro.ro_flags = RT_HAS_HEADER;
1270 /* Avoid possible recursion on BPFD_LOCK(). */
1271 NET_EPOCH_ENTER(et);
1273 error = (*ifp->if_output)(ifp, m, &dst, &ro);
1275 counter_u64_add(d->bd_wdcount, 1);
1279 (*ifp->if_input)(ifp, mc);
1289 counter_u64_add(d->bd_wdcount, 1);
1296 * Reset a descriptor by flushing its packet buffer and clearing the receive
1297 * and drop counts. This is doable for kernel-only buffers, but with
1298 * zero-copy buffers, we can't write to (or rotate) buffers that are
1299 * currently owned by userspace. It would be nice if we could encapsulate
1300 * this logic in the buffer code rather than here.
1303 reset_d(struct bpf_d *d)
1306 BPFD_LOCK_ASSERT(d);
1308 while (d->bd_hbuf_in_use)
1309 mtx_sleep(&d->bd_hbuf_in_use, &d->bd_lock, PRINET,
1311 if ((d->bd_hbuf != NULL) &&
1312 (d->bd_bufmode != BPF_BUFMODE_ZBUF || bpf_canfreebuf(d))) {
1313 /* Free the hold buffer. */
1314 d->bd_fbuf = d->bd_hbuf;
1317 bpf_buf_reclaimed(d);
1319 if (bpf_canwritebuf(d))
1321 counter_u64_zero(d->bd_rcount);
1322 counter_u64_zero(d->bd_dcount);
1323 counter_u64_zero(d->bd_fcount);
1324 counter_u64_zero(d->bd_wcount);
1325 counter_u64_zero(d->bd_wfcount);
1326 counter_u64_zero(d->bd_wdcount);
1327 counter_u64_zero(d->bd_zcopy);
1331 * FIONREAD Check for read packet available.
1332 * BIOCGBLEN Get buffer len [for read()].
1333 * BIOCSETF Set read filter.
1334 * BIOCSETFNR Set read filter without resetting descriptor.
1335 * BIOCSETWF Set write filter.
1336 * BIOCFLUSH Flush read packet buffer.
1337 * BIOCPROMISC Put interface into promiscuous mode.
1338 * BIOCGDLT Get link layer type.
1339 * BIOCGETIF Get interface name.
1340 * BIOCSETIF Set interface.
1341 * BIOCSRTIMEOUT Set read timeout.
1342 * BIOCGRTIMEOUT Get read timeout.
1343 * BIOCGSTATS Get packet stats.
1344 * BIOCIMMEDIATE Set immediate mode.
1345 * BIOCVERSION Get filter language version.
1346 * BIOCGHDRCMPLT Get "header already complete" flag
1347 * BIOCSHDRCMPLT Set "header already complete" flag
1348 * BIOCGDIRECTION Get packet direction flag
1349 * BIOCSDIRECTION Set packet direction flag
1350 * BIOCGTSTAMP Get time stamp format and resolution.
1351 * BIOCSTSTAMP Set time stamp format and resolution.
1352 * BIOCLOCK Set "locked" flag
1353 * BIOCFEEDBACK Set packet feedback mode.
1354 * BIOCSETZBUF Set current zero-copy buffer locations.
1355 * BIOCGETZMAX Get maximum zero-copy buffer size.
1356 * BIOCROTZBUF Force rotation of zero-copy buffer
1357 * BIOCSETBUFMODE Set buffer mode.
1358 * BIOCGETBUFMODE Get current buffer mode.
1362 bpfioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flags,
1368 error = devfs_get_cdevpriv((void **)&d);
1373 * Refresh PID associated with this descriptor.
1376 BPF_PID_REFRESH(d, td);
1377 if (d->bd_state == BPF_WAITING)
1378 callout_stop(&d->bd_callout);
1379 d->bd_state = BPF_IDLE;
1382 if (d->bd_locked == 1) {
1388 #ifdef COMPAT_FREEBSD32
1389 case BIOCGDLTLIST32:
1393 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1394 case BIOCGRTIMEOUT32:
1405 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1406 case BIOCSRTIMEOUT32:
1416 #ifdef COMPAT_FREEBSD32
1418 * If we see a 32-bit compat ioctl, mark the stream as 32-bit so
1419 * that it will get 32-bit packet headers.
1425 case BIOCGDLTLIST32:
1426 case BIOCGRTIMEOUT32:
1427 case BIOCSRTIMEOUT32:
1428 if (SV_PROC_FLAG(td->td_proc, SV_ILP32)) {
1436 CURVNET_SET(TD_TO_VNET(td));
1443 * Check for read packet available.
1451 while (d->bd_hbuf_in_use)
1452 mtx_sleep(&d->bd_hbuf_in_use, &d->bd_lock,
1453 PRINET, "bd_hbuf", 0);
1463 * Get buffer len [for read()].
1467 *(u_int *)addr = d->bd_bufsize;
1472 * Set buffer length.
1475 error = bpf_ioctl_sblen(d, (u_int *)addr);
1479 * Set link layer read filter.
1484 #ifdef COMPAT_FREEBSD32
1489 error = bpf_setf(d, (struct bpf_program *)addr, cmd);
1493 * Flush read packet buffer.
1502 * Put interface into promiscuous mode.
1505 if (d->bd_bif == NULL) {
1507 * No interface attached yet.
1512 if (d->bd_promisc == 0) {
1513 error = ifpromisc(d->bd_bif->bif_ifp, 1);
1520 * Get current data link type.
1524 if (d->bd_bif == NULL)
1527 *(u_int *)addr = d->bd_bif->bif_dlt;
1532 * Get a list of supported data link types.
1534 #ifdef COMPAT_FREEBSD32
1535 case BIOCGDLTLIST32:
1537 struct bpf_dltlist32 *list32;
1538 struct bpf_dltlist dltlist;
1540 list32 = (struct bpf_dltlist32 *)addr;
1541 dltlist.bfl_len = list32->bfl_len;
1542 dltlist.bfl_list = PTRIN(list32->bfl_list);
1544 if (d->bd_bif == NULL)
1547 error = bpf_getdltlist(d, &dltlist);
1549 list32->bfl_len = dltlist.bfl_len;
1558 if (d->bd_bif == NULL)
1561 error = bpf_getdltlist(d, (struct bpf_dltlist *)addr);
1566 * Set data link type.
1570 if (d->bd_bif == NULL)
1573 error = bpf_setdlt(d, *(u_int *)addr);
1578 * Get interface name.
1582 if (d->bd_bif == NULL)
1585 struct ifnet *const ifp = d->bd_bif->bif_ifp;
1586 struct ifreq *const ifr = (struct ifreq *)addr;
1588 strlcpy(ifr->ifr_name, ifp->if_xname,
1589 sizeof(ifr->ifr_name));
1599 int alloc_buf, size;
1602 * Behavior here depends on the buffering model. If
1603 * we're using kernel memory buffers, then we can
1604 * allocate them here. If we're using zero-copy,
1605 * then the user process must have registered buffers
1606 * by the time we get here.
1610 if (d->bd_bufmode == BPF_BUFMODE_BUFFER &&
1615 size = d->bd_bufsize;
1616 error = bpf_buffer_ioctl_sblen(d, &size);
1621 error = bpf_setif(d, (struct ifreq *)addr);
1630 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1631 case BIOCSRTIMEOUT32:
1634 struct timeval *tv = (struct timeval *)addr;
1635 #if defined(COMPAT_FREEBSD32) && !defined(__mips__)
1636 struct timeval32 *tv32;
1637 struct timeval tv64;
1639 if (cmd == BIOCSRTIMEOUT32) {
1640 tv32 = (struct timeval32 *)addr;
1642 tv->tv_sec = tv32->tv_sec;
1643 tv->tv_usec = tv32->tv_usec;
1646 tv = (struct timeval *)addr;
1649 * Subtract 1 tick from tvtohz() since this isn't
1652 if ((error = itimerfix(tv)) == 0)
1653 d->bd_rtout = tvtohz(tv) - 1;
1661 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1662 case BIOCGRTIMEOUT32:
1666 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1667 struct timeval32 *tv32;
1668 struct timeval tv64;
1670 if (cmd == BIOCGRTIMEOUT32)
1674 tv = (struct timeval *)addr;
1676 tv->tv_sec = d->bd_rtout / hz;
1677 tv->tv_usec = (d->bd_rtout % hz) * tick;
1678 #if defined(COMPAT_FREEBSD32) && defined(__amd64__)
1679 if (cmd == BIOCGRTIMEOUT32) {
1680 tv32 = (struct timeval32 *)addr;
1681 tv32->tv_sec = tv->tv_sec;
1682 tv32->tv_usec = tv->tv_usec;
1694 struct bpf_stat *bs = (struct bpf_stat *)addr;
1696 /* XXXCSJP overflow */
1697 bs->bs_recv = (u_int)counter_u64_fetch(d->bd_rcount);
1698 bs->bs_drop = (u_int)counter_u64_fetch(d->bd_dcount);
1703 * Set immediate mode.
1707 d->bd_immediate = *(u_int *)addr;
1713 struct bpf_version *bv = (struct bpf_version *)addr;
1715 bv->bv_major = BPF_MAJOR_VERSION;
1716 bv->bv_minor = BPF_MINOR_VERSION;
1721 * Get "header already complete" flag
1725 *(u_int *)addr = d->bd_hdrcmplt;
1730 * Set "header already complete" flag
1734 d->bd_hdrcmplt = *(u_int *)addr ? 1 : 0;
1739 * Get packet direction flag
1741 case BIOCGDIRECTION:
1743 *(u_int *)addr = d->bd_direction;
1748 * Set packet direction flag
1750 case BIOCSDIRECTION:
1754 direction = *(u_int *)addr;
1755 switch (direction) {
1760 d->bd_direction = direction;
1770 * Get packet timestamp format and resolution.
1774 *(u_int *)addr = d->bd_tstamp;
1779 * Set packet timestamp format and resolution.
1785 func = *(u_int *)addr;
1786 if (BPF_T_VALID(func))
1787 d->bd_tstamp = func;
1795 d->bd_feedback = *(u_int *)addr;
1805 case FIONBIO: /* Non-blocking I/O */
1808 case FIOASYNC: /* Send signal on receive packets */
1810 d->bd_async = *(int *)addr;
1816 * XXX: Add some sort of locking here?
1817 * fsetown() can sleep.
1819 error = fsetown(*(int *)addr, &d->bd_sigio);
1824 *(int *)addr = fgetown(&d->bd_sigio);
1828 /* This is deprecated, FIOSETOWN should be used instead. */
1830 error = fsetown(-(*(int *)addr), &d->bd_sigio);
1833 /* This is deprecated, FIOGETOWN should be used instead. */
1835 *(int *)addr = -fgetown(&d->bd_sigio);
1838 case BIOCSRSIG: /* Set receive signal */
1842 sig = *(u_int *)addr;
1855 *(u_int *)addr = d->bd_sig;
1859 case BIOCGETBUFMODE:
1861 *(u_int *)addr = d->bd_bufmode;
1865 case BIOCSETBUFMODE:
1867 * Allow the buffering mode to be changed as long as we
1868 * haven't yet committed to a particular mode. Our
1869 * definition of commitment, for now, is whether or not a
1870 * buffer has been allocated or an interface attached, since
1871 * that's the point where things get tricky.
1873 switch (*(u_int *)addr) {
1874 case BPF_BUFMODE_BUFFER:
1877 case BPF_BUFMODE_ZBUF:
1878 if (bpf_zerocopy_enable)
1888 if (d->bd_sbuf != NULL || d->bd_hbuf != NULL ||
1889 d->bd_fbuf != NULL || d->bd_bif != NULL) {
1894 d->bd_bufmode = *(u_int *)addr;
1899 error = bpf_ioctl_getzmax(td, d, (size_t *)addr);
1903 error = bpf_ioctl_setzbuf(td, d, (struct bpf_zbuf *)addr);
1907 error = bpf_ioctl_rotzbuf(td, d, (struct bpf_zbuf *)addr);
1915 * Set d's packet filter program to fp. If this file already has a filter,
1916 * free it and replace it. Returns EINVAL for bogus requests.
1918 * Note we use global lock here to serialize bpf_setf() and bpf_setif()
1922 bpf_setf(struct bpf_d *d, struct bpf_program *fp, u_long cmd)
1924 #ifdef COMPAT_FREEBSD32
1925 struct bpf_program fp_swab;
1926 struct bpf_program32 *fp32;
1928 struct bpf_program_buffer *fcode;
1929 struct bpf_insn *filter;
1931 bpf_jit_filter *jfunc;
1937 #ifdef COMPAT_FREEBSD32
1942 fp32 = (struct bpf_program32 *)fp;
1943 fp_swab.bf_len = fp32->bf_len;
1945 (struct bpf_insn *)(uintptr_t)fp32->bf_insns;
1964 * Check new filter validness before acquiring any locks.
1965 * Allocate memory for new filter, if needed.
1968 if (flen > bpf_maxinsns || (fp->bf_insns == NULL && flen != 0))
1970 size = flen * sizeof(*fp->bf_insns);
1972 /* We're setting up new filter. Copy and check actual data. */
1973 fcode = bpf_program_buffer_alloc(size, M_WAITOK);
1974 filter = (struct bpf_insn *)fcode->buffer;
1975 if (copyin(fp->bf_insns, filter, size) != 0 ||
1976 !bpf_validate(filter, flen)) {
1981 if (cmd != BIOCSETWF) {
1983 * Filter is copied inside fcode and is
1986 jfunc = bpf_jitter(filter, flen);
1991 track_event = false;
1996 /* Set up new filter. */
1997 if (cmd == BIOCSETWF) {
1998 if (d->bd_wfilter != NULL) {
1999 fcode = __containerof((void *)d->bd_wfilter,
2000 struct bpf_program_buffer, buffer);
2005 d->bd_wfilter = filter;
2007 if (d->bd_rfilter != NULL) {
2008 fcode = __containerof((void *)d->bd_rfilter,
2009 struct bpf_program_buffer, buffer);
2011 fcode->func = d->bd_bfilter;
2014 d->bd_rfilter = filter;
2016 d->bd_bfilter = jfunc;
2018 if (cmd == BIOCSETF)
2021 if (bpf_check_upgrade(cmd, d, filter, flen) != 0) {
2023 * Filter can be set several times without
2024 * specifying interface. In this case just mark d
2028 if (d->bd_bif != NULL) {
2030 * Remove descriptor from writers-only list
2031 * and add it to active readers list.
2033 CK_LIST_REMOVE(d, bd_next);
2034 CK_LIST_INSERT_HEAD(&d->bd_bif->bif_dlist,
2037 "%s: upgrade required by pid %d",
2038 __func__, d->bd_pid);
2046 NET_EPOCH_CALL(bpf_program_buffer_free, &fcode->epoch_ctx);
2049 EVENTHANDLER_INVOKE(bpf_track,
2050 d->bd_bif->bif_ifp, d->bd_bif->bif_dlt, 1);
2057 * Detach a file from its current interface (if attached at all) and attach
2058 * to the interface indicated by the name stored in ifr.
2059 * Return an errno or 0.
2062 bpf_setif(struct bpf_d *d, struct ifreq *ifr)
2065 struct ifnet *theywant;
2069 theywant = ifunit(ifr->ifr_name);
2070 if (theywant == NULL || theywant->if_bpf == NULL)
2073 bp = theywant->if_bpf;
2075 * At this point, we expect the buffer is already allocated. If not,
2078 switch (d->bd_bufmode) {
2079 case BPF_BUFMODE_BUFFER:
2080 case BPF_BUFMODE_ZBUF:
2081 if (d->bd_sbuf == NULL)
2086 panic("bpf_setif: bufmode %d", d->bd_bufmode);
2088 if (bp != d->bd_bif)
2099 * Support for select() and poll() system calls
2101 * Return true iff the specific operation will not block indefinitely.
2102 * Otherwise, return false but make a note that a selwakeup() must be done.
2105 bpfpoll(struct cdev *dev, int events, struct thread *td)
2110 if (devfs_get_cdevpriv((void **)&d) != 0 || d->bd_bif == NULL)
2112 (POLLHUP|POLLIN|POLLRDNORM|POLLOUT|POLLWRNORM));
2115 * Refresh PID associated with this descriptor.
2117 revents = events & (POLLOUT | POLLWRNORM);
2119 BPF_PID_REFRESH(d, td);
2120 if (events & (POLLIN | POLLRDNORM)) {
2122 revents |= events & (POLLIN | POLLRDNORM);
2124 selrecord(td, &d->bd_sel);
2125 /* Start the read timeout if necessary. */
2126 if (d->bd_rtout > 0 && d->bd_state == BPF_IDLE) {
2127 callout_reset(&d->bd_callout, d->bd_rtout,
2129 d->bd_state = BPF_WAITING;
2138 * Support for kevent() system call. Register EVFILT_READ filters and
2139 * reject all others.
2142 bpfkqfilter(struct cdev *dev, struct knote *kn)
2146 if (devfs_get_cdevpriv((void **)&d) != 0 ||
2147 kn->kn_filter != EVFILT_READ)
2151 * Refresh PID associated with this descriptor.
2154 BPF_PID_REFRESH_CUR(d);
2155 kn->kn_fop = &bpfread_filtops;
2157 knlist_add(&d->bd_sel.si_note, kn, 1);
2164 filt_bpfdetach(struct knote *kn)
2166 struct bpf_d *d = (struct bpf_d *)kn->kn_hook;
2168 knlist_remove(&d->bd_sel.si_note, kn, 0);
2172 filt_bpfread(struct knote *kn, long hint)
2174 struct bpf_d *d = (struct bpf_d *)kn->kn_hook;
2177 BPFD_LOCK_ASSERT(d);
2178 ready = bpf_ready(d);
2180 kn->kn_data = d->bd_slen;
2182 * Ignore the hold buffer if it is being copied to user space.
2184 if (!d->bd_hbuf_in_use && d->bd_hbuf)
2185 kn->kn_data += d->bd_hlen;
2186 } else if (d->bd_rtout > 0 && d->bd_state == BPF_IDLE) {
2187 callout_reset(&d->bd_callout, d->bd_rtout,
2189 d->bd_state = BPF_WAITING;
2195 #define BPF_TSTAMP_NONE 0
2196 #define BPF_TSTAMP_FAST 1
2197 #define BPF_TSTAMP_NORMAL 2
2198 #define BPF_TSTAMP_EXTERN 3
2201 bpf_ts_quality(int tstype)
2204 if (tstype == BPF_T_NONE)
2205 return (BPF_TSTAMP_NONE);
2206 if ((tstype & BPF_T_FAST) != 0)
2207 return (BPF_TSTAMP_FAST);
2209 return (BPF_TSTAMP_NORMAL);
2213 bpf_gettime(struct bintime *bt, int tstype, struct mbuf *m)
2218 quality = bpf_ts_quality(tstype);
2219 if (quality == BPF_TSTAMP_NONE)
2223 tag = m_tag_locate(m, MTAG_BPF, MTAG_BPF_TIMESTAMP, NULL);
2225 *bt = *(struct bintime *)(tag + 1);
2226 return (BPF_TSTAMP_EXTERN);
2229 if (quality == BPF_TSTAMP_NORMAL)
2238 * Incoming linkage from device drivers. Process the packet pkt, of length
2239 * pktlen, which is stored in a contiguous buffer. The packet is parsed
2240 * by each process' filter, and if accepted, stashed into the corresponding
2244 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
2246 struct epoch_tracker et;
2255 gottime = BPF_TSTAMP_NONE;
2256 NET_EPOCH_ENTER(et);
2257 CK_LIST_FOREACH(d, &bp->bif_dlist, bd_next) {
2258 counter_u64_add(d->bd_rcount, 1);
2260 * NB: We dont call BPF_CHECK_DIRECTION() here since there
2261 * is no way for the caller to indiciate to us whether this
2262 * packet is inbound or outbound. In the bpf_mtap() routines,
2263 * we use the interface pointers on the mbuf to figure it out.
2266 bf = bpf_jitter_enable != 0 ? d->bd_bfilter : NULL;
2268 slen = (*(bf->func))(pkt, pktlen, pktlen);
2271 slen = bpf_filter(d->bd_rfilter, pkt, pktlen, pktlen);
2274 * Filter matches. Let's to acquire write lock.
2277 counter_u64_add(d->bd_fcount, 1);
2278 if (gottime < bpf_ts_quality(d->bd_tstamp))
2279 gottime = bpf_gettime(&bt, d->bd_tstamp,
2282 if (mac_bpfdesc_check_receive(d, bp->bif_ifp) == 0)
2284 catchpacket(d, pkt, pktlen, slen,
2285 bpf_append_bytes, &bt);
2292 #define BPF_CHECK_DIRECTION(d, r, i) \
2293 (((d)->bd_direction == BPF_D_IN && (r) != (i)) || \
2294 ((d)->bd_direction == BPF_D_OUT && (r) == (i)))
2297 * Incoming linkage from device drivers, when packet is in an mbuf chain.
2298 * Locking model is explained in bpf_tap().
2301 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
2303 struct epoch_tracker et;
2312 /* Skip outgoing duplicate packets. */
2313 if ((m->m_flags & M_PROMISC) != 0 && m_rcvif(m) == NULL) {
2314 m->m_flags &= ~M_PROMISC;
2318 pktlen = m_length(m, NULL);
2319 gottime = BPF_TSTAMP_NONE;
2321 NET_EPOCH_ENTER(et);
2322 CK_LIST_FOREACH(d, &bp->bif_dlist, bd_next) {
2323 if (BPF_CHECK_DIRECTION(d, m_rcvif(m), bp->bif_ifp))
2325 counter_u64_add(d->bd_rcount, 1);
2327 bf = bpf_jitter_enable != 0 ? d->bd_bfilter : NULL;
2328 /* XXX We cannot handle multiple mbufs. */
2329 if (bf != NULL && m->m_next == NULL)
2330 slen = (*(bf->func))(mtod(m, u_char *), pktlen,
2334 slen = bpf_filter(d->bd_rfilter, (u_char *)m, pktlen, 0);
2338 counter_u64_add(d->bd_fcount, 1);
2339 if (gottime < bpf_ts_quality(d->bd_tstamp))
2340 gottime = bpf_gettime(&bt, d->bd_tstamp, m);
2342 if (mac_bpfdesc_check_receive(d, bp->bif_ifp) == 0)
2344 catchpacket(d, (u_char *)m, pktlen, slen,
2345 bpf_append_mbuf, &bt);
2353 * Incoming linkage from device drivers, when packet is in
2354 * an mbuf chain and to be prepended by a contiguous header.
2357 bpf_mtap2(struct bpf_if *bp, void *data, u_int dlen, struct mbuf *m)
2359 struct epoch_tracker et;
2366 /* Skip outgoing duplicate packets. */
2367 if ((m->m_flags & M_PROMISC) != 0 && m->m_pkthdr.rcvif == NULL) {
2368 m->m_flags &= ~M_PROMISC;
2372 pktlen = m_length(m, NULL);
2374 * Craft on-stack mbuf suitable for passing to bpf_filter.
2375 * Note that we cut corners here; we only setup what's
2376 * absolutely needed--this mbuf should never go anywhere else.
2384 gottime = BPF_TSTAMP_NONE;
2386 NET_EPOCH_ENTER(et);
2387 CK_LIST_FOREACH(d, &bp->bif_dlist, bd_next) {
2388 if (BPF_CHECK_DIRECTION(d, m->m_pkthdr.rcvif, bp->bif_ifp))
2390 counter_u64_add(d->bd_rcount, 1);
2391 slen = bpf_filter(d->bd_rfilter, (u_char *)&mb, pktlen, 0);
2395 counter_u64_add(d->bd_fcount, 1);
2396 if (gottime < bpf_ts_quality(d->bd_tstamp))
2397 gottime = bpf_gettime(&bt, d->bd_tstamp, m);
2399 if (mac_bpfdesc_check_receive(d, bp->bif_ifp) == 0)
2401 catchpacket(d, (u_char *)&mb, pktlen, slen,
2402 bpf_append_mbuf, &bt);
2409 #undef BPF_CHECK_DIRECTION
2410 #undef BPF_TSTAMP_NONE
2411 #undef BPF_TSTAMP_FAST
2412 #undef BPF_TSTAMP_NORMAL
2413 #undef BPF_TSTAMP_EXTERN
2416 bpf_hdrlen(struct bpf_d *d)
2420 hdrlen = d->bd_bif->bif_hdrlen;
2421 #ifndef BURN_BRIDGES
2422 if (d->bd_tstamp == BPF_T_NONE ||
2423 BPF_T_FORMAT(d->bd_tstamp) == BPF_T_MICROTIME)
2424 #ifdef COMPAT_FREEBSD32
2426 hdrlen += SIZEOF_BPF_HDR(struct bpf_hdr32);
2429 hdrlen += SIZEOF_BPF_HDR(struct bpf_hdr);
2432 hdrlen += SIZEOF_BPF_HDR(struct bpf_xhdr);
2433 #ifdef COMPAT_FREEBSD32
2435 hdrlen = BPF_WORDALIGN32(hdrlen);
2438 hdrlen = BPF_WORDALIGN(hdrlen);
2440 return (hdrlen - d->bd_bif->bif_hdrlen);
2444 bpf_bintime2ts(struct bintime *bt, struct bpf_ts *ts, int tstype)
2446 struct bintime bt2, boottimebin;
2448 struct timespec tsn;
2450 if ((tstype & BPF_T_MONOTONIC) == 0) {
2452 getboottimebin(&boottimebin);
2453 bintime_add(&bt2, &boottimebin);
2456 switch (BPF_T_FORMAT(tstype)) {
2457 case BPF_T_MICROTIME:
2458 bintime2timeval(bt, &tsm);
2459 ts->bt_sec = tsm.tv_sec;
2460 ts->bt_frac = tsm.tv_usec;
2462 case BPF_T_NANOTIME:
2463 bintime2timespec(bt, &tsn);
2464 ts->bt_sec = tsn.tv_sec;
2465 ts->bt_frac = tsn.tv_nsec;
2468 ts->bt_sec = bt->sec;
2469 ts->bt_frac = bt->frac;
2475 * Move the packet data from interface memory (pkt) into the
2476 * store buffer. "cpfn" is the routine called to do the actual data
2477 * transfer. bcopy is passed in to copy contiguous chunks, while
2478 * bpf_append_mbuf is passed in to copy mbuf chains. In the latter case,
2479 * pkt is really an mbuf.
2482 catchpacket(struct bpf_d *d, u_char *pkt, u_int pktlen, u_int snaplen,
2483 void (*cpfn)(struct bpf_d *, caddr_t, u_int, void *, u_int),
2486 struct bpf_xhdr hdr;
2487 #ifndef BURN_BRIDGES
2488 struct bpf_hdr hdr_old;
2489 #ifdef COMPAT_FREEBSD32
2490 struct bpf_hdr32 hdr32_old;
2493 int caplen, curlen, hdrlen, totlen;
2498 BPFD_LOCK_ASSERT(d);
2499 if (d->bd_bif == NULL) {
2500 /* Descriptor was detached in concurrent thread */
2501 counter_u64_add(d->bd_dcount, 1);
2506 * Detect whether user space has released a buffer back to us, and if
2507 * so, move it from being a hold buffer to a free buffer. This may
2508 * not be the best place to do it (for example, we might only want to
2509 * run this check if we need the space), but for now it's a reliable
2512 if (d->bd_fbuf == NULL && bpf_canfreebuf(d)) {
2513 d->bd_fbuf = d->bd_hbuf;
2516 bpf_buf_reclaimed(d);
2520 * Figure out how many bytes to move. If the packet is
2521 * greater or equal to the snapshot length, transfer that
2522 * much. Otherwise, transfer the whole packet (unless
2523 * we hit the buffer size limit).
2525 hdrlen = bpf_hdrlen(d);
2526 totlen = hdrlen + min(snaplen, pktlen);
2527 if (totlen > d->bd_bufsize)
2528 totlen = d->bd_bufsize;
2531 * Round up the end of the previous packet to the next longword.
2533 * Drop the packet if there's no room and no hope of room
2534 * If the packet would overflow the storage buffer or the storage
2535 * buffer is considered immutable by the buffer model, try to rotate
2536 * the buffer and wakeup pending processes.
2538 #ifdef COMPAT_FREEBSD32
2540 curlen = BPF_WORDALIGN32(d->bd_slen);
2543 curlen = BPF_WORDALIGN(d->bd_slen);
2544 if (curlen + totlen > d->bd_bufsize || !bpf_canwritebuf(d)) {
2545 if (d->bd_fbuf == NULL) {
2547 * There's no room in the store buffer, and no
2548 * prospect of room, so drop the packet. Notify the
2552 counter_u64_add(d->bd_dcount, 1);
2555 KASSERT(!d->bd_hbuf_in_use, ("hold buffer is in use"));
2559 } else if (d->bd_immediate || d->bd_state == BPF_TIMED_OUT)
2561 * Immediate mode is set, or the read timeout has already
2562 * expired during a select call. A packet arrived, so the
2563 * reader should be woken up.
2566 caplen = totlen - hdrlen;
2567 tstype = d->bd_tstamp;
2568 do_timestamp = tstype != BPF_T_NONE;
2569 #ifndef BURN_BRIDGES
2570 if (tstype == BPF_T_NONE || BPF_T_FORMAT(tstype) == BPF_T_MICROTIME) {
2573 bpf_bintime2ts(bt, &ts, tstype);
2574 #ifdef COMPAT_FREEBSD32
2575 if (d->bd_compat32) {
2576 bzero(&hdr32_old, sizeof(hdr32_old));
2578 hdr32_old.bh_tstamp.tv_sec = ts.bt_sec;
2579 hdr32_old.bh_tstamp.tv_usec = ts.bt_frac;
2581 hdr32_old.bh_datalen = pktlen;
2582 hdr32_old.bh_hdrlen = hdrlen;
2583 hdr32_old.bh_caplen = caplen;
2584 bpf_append_bytes(d, d->bd_sbuf, curlen, &hdr32_old,
2589 bzero(&hdr_old, sizeof(hdr_old));
2591 hdr_old.bh_tstamp.tv_sec = ts.bt_sec;
2592 hdr_old.bh_tstamp.tv_usec = ts.bt_frac;
2594 hdr_old.bh_datalen = pktlen;
2595 hdr_old.bh_hdrlen = hdrlen;
2596 hdr_old.bh_caplen = caplen;
2597 bpf_append_bytes(d, d->bd_sbuf, curlen, &hdr_old,
2604 * Append the bpf header. Note we append the actual header size, but
2605 * move forward the length of the header plus padding.
2607 bzero(&hdr, sizeof(hdr));
2609 bpf_bintime2ts(bt, &hdr.bh_tstamp, tstype);
2610 hdr.bh_datalen = pktlen;
2611 hdr.bh_hdrlen = hdrlen;
2612 hdr.bh_caplen = caplen;
2613 bpf_append_bytes(d, d->bd_sbuf, curlen, &hdr, sizeof(hdr));
2616 * Copy the packet data into the store buffer and update its length.
2618 #ifndef BURN_BRIDGES
2621 (*cpfn)(d, d->bd_sbuf, curlen + hdrlen, pkt, caplen);
2622 d->bd_slen = curlen + totlen;
2629 * Free buffers currently in use by a descriptor.
2633 bpfd_free(epoch_context_t ctx)
2636 struct bpf_program_buffer *p;
2639 * We don't need to lock out interrupts since this descriptor has
2640 * been detached from its interface and it yet hasn't been marked
2643 d = __containerof(ctx, struct bpf_d, epoch_ctx);
2645 if (d->bd_rfilter != NULL) {
2646 p = __containerof((void *)d->bd_rfilter,
2647 struct bpf_program_buffer, buffer);
2649 p->func = d->bd_bfilter;
2651 bpf_program_buffer_free(&p->epoch_ctx);
2653 if (d->bd_wfilter != NULL) {
2654 p = __containerof((void *)d->bd_wfilter,
2655 struct bpf_program_buffer, buffer);
2659 bpf_program_buffer_free(&p->epoch_ctx);
2662 mtx_destroy(&d->bd_lock);
2663 counter_u64_free(d->bd_rcount);
2664 counter_u64_free(d->bd_dcount);
2665 counter_u64_free(d->bd_fcount);
2666 counter_u64_free(d->bd_wcount);
2667 counter_u64_free(d->bd_wfcount);
2668 counter_u64_free(d->bd_wdcount);
2669 counter_u64_free(d->bd_zcopy);
2674 * Attach an interface to bpf. dlt is the link layer type; hdrlen is the
2675 * fixed size of the link header (variable length headers not yet supported).
2678 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
2681 bpfattach2(ifp, dlt, hdrlen, &ifp->if_bpf);
2685 * Attach an interface to bpf. ifp is a pointer to the structure
2686 * defining the interface to be attached, dlt is the link layer type,
2687 * and hdrlen is the fixed size of the link header (variable length
2688 * headers are not yet supporrted).
2691 bpfattach2(struct ifnet *ifp, u_int dlt, u_int hdrlen,
2692 struct bpf_if **driverp)
2696 KASSERT(*driverp == NULL,
2697 ("bpfattach2: driverp already initialized"));
2699 bp = malloc(sizeof(*bp), M_BPF, M_WAITOK | M_ZERO);
2701 CK_LIST_INIT(&bp->bif_dlist);
2702 CK_LIST_INIT(&bp->bif_wlist);
2705 bp->bif_hdrlen = hdrlen;
2706 bp->bif_bpf = driverp;
2710 * Reference ifnet pointer, so it won't freed until
2715 CK_LIST_INSERT_HEAD(&bpf_iflist, bp, bif_next);
2718 if (bootverbose && IS_DEFAULT_VNET(curvnet))
2719 if_printf(ifp, "bpf attached\n");
2724 * When moving interfaces between vnet instances we need a way to
2725 * query the dlt and hdrlen before detach so we can re-attch the if_bpf
2726 * after the vmove. We unfortunately have no device driver infrastructure
2727 * to query the interface for these values after creation/attach, thus
2728 * add this as a workaround.
2731 bpf_get_bp_params(struct bpf_if *bp, u_int *bif_dlt, u_int *bif_hdrlen)
2736 if (bif_dlt == NULL && bif_hdrlen == NULL)
2739 if (bif_dlt != NULL)
2740 *bif_dlt = bp->bif_dlt;
2741 if (bif_hdrlen != NULL)
2742 *bif_hdrlen = bp->bif_hdrlen;
2749 * Detach bpf from an interface. This involves detaching each descriptor
2750 * associated with the interface. Notify each descriptor as it's detached
2751 * so that any sleepers wake up and get ENXIO.
2754 bpfdetach(struct ifnet *ifp)
2756 struct bpf_if *bp, *bp_temp;
2760 /* Find all bpf_if struct's which reference ifp and detach them. */
2761 CK_LIST_FOREACH_SAFE(bp, &bpf_iflist, bif_next, bp_temp) {
2762 if (ifp != bp->bif_ifp)
2765 CK_LIST_REMOVE(bp, bif_next);
2766 *bp->bif_bpf = (struct bpf_if *)&dead_bpf_if;
2769 "%s: sheduling free for encap %d (%p) for if %p",
2770 __func__, bp->bif_dlt, bp, ifp);
2772 /* Detach common descriptors */
2773 while ((d = CK_LIST_FIRST(&bp->bif_dlist)) != NULL) {
2774 bpf_detachd_locked(d, true);
2777 /* Detach writer-only descriptors */
2778 while ((d = CK_LIST_FIRST(&bp->bif_wlist)) != NULL) {
2779 bpf_detachd_locked(d, true);
2787 * Get a list of available data link type of the interface.
2790 bpf_getdltlist(struct bpf_d *d, struct bpf_dltlist *bfl)
2799 ifp = d->bd_bif->bif_ifp;
2801 CK_LIST_FOREACH(bp, &bpf_iflist, bif_next) {
2802 if (bp->bif_ifp == ifp)
2805 if (bfl->bfl_list == NULL) {
2809 if (n1 > bfl->bfl_len)
2812 lst = malloc(n1 * sizeof(u_int), M_TEMP, M_WAITOK);
2814 CK_LIST_FOREACH(bp, &bpf_iflist, bif_next) {
2815 if (bp->bif_ifp != ifp)
2817 lst[n++] = bp->bif_dlt;
2819 error = copyout(lst, bfl->bfl_list, sizeof(u_int) * n);
2826 * Set the data link type of a BPF instance.
2829 bpf_setdlt(struct bpf_d *d, u_int dlt)
2831 int error, opromisc;
2836 MPASS(d->bd_bif != NULL);
2839 * It is safe to check bd_bif without BPFD_LOCK, it can not be
2840 * changed while we hold global lock.
2842 if (d->bd_bif->bif_dlt == dlt)
2845 ifp = d->bd_bif->bif_ifp;
2846 CK_LIST_FOREACH(bp, &bpf_iflist, bif_next) {
2847 if (bp->bif_ifp == ifp && bp->bif_dlt == dlt)
2853 opromisc = d->bd_promisc;
2856 error = ifpromisc(bp->bif_ifp, 1);
2858 if_printf(bp->bif_ifp, "%s: ifpromisc failed (%d)\n",
2867 bpf_drvinit(void *unused)
2871 sx_init(&bpf_sx, "bpf global lock");
2872 CK_LIST_INIT(&bpf_iflist);
2874 dev = make_dev(&bpf_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600, "bpf");
2875 /* For compatibility */
2876 make_dev_alias(dev, "bpf0");
2880 * Zero out the various packet counters associated with all of the bpf
2881 * descriptors. At some point, we will probably want to get a bit more
2882 * granular and allow the user to specify descriptors to be zeroed.
2885 bpf_zero_counters(void)
2892 * We are protected by global lock here, interfaces and
2893 * descriptors can not be deleted while we hold it.
2895 CK_LIST_FOREACH(bp, &bpf_iflist, bif_next) {
2896 CK_LIST_FOREACH(bd, &bp->bif_dlist, bd_next) {
2897 counter_u64_zero(bd->bd_rcount);
2898 counter_u64_zero(bd->bd_dcount);
2899 counter_u64_zero(bd->bd_fcount);
2900 counter_u64_zero(bd->bd_wcount);
2901 counter_u64_zero(bd->bd_wfcount);
2902 counter_u64_zero(bd->bd_zcopy);
2909 * Fill filter statistics
2912 bpfstats_fill_xbpf(struct xbpf_d *d, struct bpf_d *bd)
2916 bzero(d, sizeof(*d));
2917 d->bd_structsize = sizeof(*d);
2918 d->bd_immediate = bd->bd_immediate;
2919 d->bd_promisc = bd->bd_promisc;
2920 d->bd_hdrcmplt = bd->bd_hdrcmplt;
2921 d->bd_direction = bd->bd_direction;
2922 d->bd_feedback = bd->bd_feedback;
2923 d->bd_async = bd->bd_async;
2924 d->bd_rcount = counter_u64_fetch(bd->bd_rcount);
2925 d->bd_dcount = counter_u64_fetch(bd->bd_dcount);
2926 d->bd_fcount = counter_u64_fetch(bd->bd_fcount);
2927 d->bd_sig = bd->bd_sig;
2928 d->bd_slen = bd->bd_slen;
2929 d->bd_hlen = bd->bd_hlen;
2930 d->bd_bufsize = bd->bd_bufsize;
2931 d->bd_pid = bd->bd_pid;
2932 strlcpy(d->bd_ifname,
2933 bd->bd_bif->bif_ifp->if_xname, IFNAMSIZ);
2934 d->bd_locked = bd->bd_locked;
2935 d->bd_wcount = counter_u64_fetch(bd->bd_wcount);
2936 d->bd_wdcount = counter_u64_fetch(bd->bd_wdcount);
2937 d->bd_wfcount = counter_u64_fetch(bd->bd_wfcount);
2938 d->bd_zcopy = counter_u64_fetch(bd->bd_zcopy);
2939 d->bd_bufmode = bd->bd_bufmode;
2943 * Handle `netstat -B' stats request
2946 bpf_stats_sysctl(SYSCTL_HANDLER_ARGS)
2948 static const struct xbpf_d zerostats;
2949 struct xbpf_d *xbdbuf, *xbd, tempstats;
2955 * XXX This is not technically correct. It is possible for non
2956 * privileged users to open bpf devices. It would make sense
2957 * if the users who opened the devices were able to retrieve
2958 * the statistics for them, too.
2960 error = priv_check(req->td, PRIV_NET_BPF);
2964 * Check to see if the user is requesting that the counters be
2965 * zeroed out. Explicitly check that the supplied data is zeroed,
2966 * as we aren't allowing the user to set the counters currently.
2968 if (req->newptr != NULL) {
2969 if (req->newlen != sizeof(tempstats))
2971 memset(&tempstats, 0, sizeof(tempstats));
2972 error = SYSCTL_IN(req, &tempstats, sizeof(tempstats));
2975 if (bcmp(&tempstats, &zerostats, sizeof(tempstats)) != 0)
2977 bpf_zero_counters();
2980 if (req->oldptr == NULL)
2981 return (SYSCTL_OUT(req, 0, bpf_bpfd_cnt * sizeof(*xbd)));
2982 if (bpf_bpfd_cnt == 0)
2983 return (SYSCTL_OUT(req, 0, 0));
2984 xbdbuf = malloc(req->oldlen, M_BPF, M_WAITOK);
2986 if (req->oldlen < (bpf_bpfd_cnt * sizeof(*xbd))) {
2988 free(xbdbuf, M_BPF);
2992 CK_LIST_FOREACH(bp, &bpf_iflist, bif_next) {
2993 /* Send writers-only first */
2994 CK_LIST_FOREACH(bd, &bp->bif_wlist, bd_next) {
2995 xbd = &xbdbuf[index++];
2996 bpfstats_fill_xbpf(xbd, bd);
2998 CK_LIST_FOREACH(bd, &bp->bif_dlist, bd_next) {
2999 xbd = &xbdbuf[index++];
3000 bpfstats_fill_xbpf(xbd, bd);
3004 error = SYSCTL_OUT(req, xbdbuf, index * sizeof(*xbd));
3005 free(xbdbuf, M_BPF);
3009 SYSINIT(bpfdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE,bpf_drvinit,NULL);
3011 #else /* !DEV_BPF && !NETGRAPH_BPF */
3014 * NOP stubs to allow bpf-using drivers to load and function.
3016 * A 'better' implementation would allow the core bpf functionality
3017 * to be loaded at runtime.
3021 bpf_tap(struct bpf_if *bp, u_char *pkt, u_int pktlen)
3026 bpf_mtap(struct bpf_if *bp, struct mbuf *m)
3031 bpf_mtap2(struct bpf_if *bp, void *d, u_int l, struct mbuf *m)
3036 bpfattach(struct ifnet *ifp, u_int dlt, u_int hdrlen)
3039 bpfattach2(ifp, dlt, hdrlen, &ifp->if_bpf);
3043 bpfattach2(struct ifnet *ifp, u_int dlt, u_int hdrlen, struct bpf_if **driverp)
3046 *driverp = (struct bpf_if *)&dead_bpf_if;
3050 bpfdetach(struct ifnet *ifp)
3055 bpf_filter(const struct bpf_insn *pc, u_char *p, u_int wirelen, u_int buflen)
3057 return -1; /* "no filter" behaviour */
3061 bpf_validate(const struct bpf_insn *f, int len)
3063 return 0; /* false */
3066 #endif /* !DEV_BPF && !NETGRAPH_BPF */
3070 bpf_show_bpf_if(struct bpf_if *bpf_if)
3075 db_printf("%p:\n", bpf_if);
3076 #define BPF_DB_PRINTF(f, e) db_printf(" %s = " f "\n", #e, bpf_if->e);
3077 /* bif_ext.bif_next */
3078 /* bif_ext.bif_dlist */
3079 BPF_DB_PRINTF("%#x", bif_dlt);
3080 BPF_DB_PRINTF("%u", bif_hdrlen);
3082 BPF_DB_PRINTF("%p", bif_ifp);
3083 BPF_DB_PRINTF("%p", bif_bpf);
3084 BPF_DB_PRINTF("%u", bif_refcnt);
3087 DB_SHOW_COMMAND(bpf_if, db_show_bpf_if)
3091 db_printf("usage: show bpf_if <struct bpf_if *>\n");
3095 bpf_show_bpf_if((struct bpf_if *)addr);