]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/net80211/_ieee80211.h
This commit was generated by cvs2svn to compensate for changes in r162911,
[FreeBSD/FreeBSD.git] / sys / net80211 / _ieee80211.h
1 /*-
2  * Copyright (c) 2001 Atsushi Onoe
3  * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the author may not be used to endorse or promote products
15  *    derived from this software without specific prior written permission.
16  *
17  * Alternatively, this software may be distributed under the terms of the
18  * GNU General Public License ("GPL") version 2 as published by the Free
19  * Software Foundation.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * $FreeBSD$
33  */
34 #ifndef _NET80211__IEEE80211_H_
35 #define _NET80211__IEEE80211_H_
36
37 enum ieee80211_phytype {
38         IEEE80211_T_DS,                 /* direct sequence spread spectrum */
39         IEEE80211_T_FH,                 /* frequency hopping */
40         IEEE80211_T_OFDM,               /* frequency division multiplexing */
41         IEEE80211_T_TURBO,              /* high rate OFDM, aka turbo mode */
42 };
43 #define IEEE80211_T_CCK IEEE80211_T_DS  /* more common nomenclature */
44
45 /* XXX not really a mode; there are really multiple PHY's */
46 enum ieee80211_phymode {
47         IEEE80211_MODE_AUTO     = 0,    /* autoselect */
48         IEEE80211_MODE_11A      = 1,    /* 5GHz, OFDM */
49         IEEE80211_MODE_11B      = 2,    /* 2GHz, CCK */
50         IEEE80211_MODE_11G      = 3,    /* 2GHz, OFDM */
51         IEEE80211_MODE_FH       = 4,    /* 2GHz, GFSK */
52         IEEE80211_MODE_TURBO_A  = 5,    /* 5GHz, OFDM, 2x clock */
53         IEEE80211_MODE_TURBO_G  = 6,    /* 2GHz, OFDM, 2x clock */
54 };
55 #define IEEE80211_MODE_MAX      (IEEE80211_MODE_TURBO_G+1)
56
57 enum ieee80211_opmode {
58         IEEE80211_M_STA         = 1,    /* infrastructure station */
59         IEEE80211_M_IBSS        = 0,    /* IBSS (adhoc) station */
60         IEEE80211_M_AHDEMO      = 3,    /* Old lucent compatible adhoc demo */
61         IEEE80211_M_HOSTAP      = 6,    /* Software Access Point */
62         IEEE80211_M_MONITOR     = 8     /* Monitor mode */
63 };
64
65 /*
66  * 802.11g protection mode.
67  */
68 enum ieee80211_protmode {
69         IEEE80211_PROT_NONE     = 0,    /* no protection */
70         IEEE80211_PROT_CTSONLY  = 1,    /* CTS to self */
71         IEEE80211_PROT_RTSCTS   = 2,    /* RTS-CTS */
72 };
73
74 /*
75  * Authentication mode.
76  */
77 enum ieee80211_authmode {
78         IEEE80211_AUTH_NONE     = 0,
79         IEEE80211_AUTH_OPEN     = 1,            /* open */
80         IEEE80211_AUTH_SHARED   = 2,            /* shared-key */
81         IEEE80211_AUTH_8021X    = 3,            /* 802.1x */
82         IEEE80211_AUTH_AUTO     = 4,            /* auto-select/accept */
83         /* NB: these are used only for ioctls */
84         IEEE80211_AUTH_WPA      = 5,            /* WPA/RSN w/ 802.1x/PSK */
85 };
86
87 /*
88  * Roaming mode is effectively who controls the operation
89  * of the 802.11 state machine when operating as a station.
90  * State transitions are controlled either by the driver
91  * (typically when management frames are processed by the
92  * hardware/firmware), the host (auto/normal operation of
93  * the 802.11 layer), or explicitly through ioctl requests
94  * when applications like wpa_supplicant want control.
95  */
96 enum ieee80211_roamingmode {
97         IEEE80211_ROAMING_DEVICE= 0,    /* driver/hardware control */
98         IEEE80211_ROAMING_AUTO  = 1,    /* 802.11 layer control */
99         IEEE80211_ROAMING_MANUAL= 2,    /* application control */
100 };
101
102 /*
103  * Channels are specified by frequency and attributes.
104  */
105 struct ieee80211_channel {
106         u_int16_t       ic_freq;        /* setting in Mhz */
107         u_int16_t       ic_flags;       /* see below */
108 };
109
110 #define IEEE80211_CHAN_MAX      255
111 #define IEEE80211_CHAN_BYTES    32      /* howmany(IEEE80211_CHAN_MAX, NBBY) */
112 #define IEEE80211_CHAN_ANY      0xffff  /* token for ``any channel'' */
113 #define IEEE80211_CHAN_ANYC \
114         ((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
115
116 /* bits 0-3 are for private use by drivers */
117 /* channel attributes */
118 #define IEEE80211_CHAN_TURBO    0x0010  /* Turbo channel */
119 #define IEEE80211_CHAN_CCK      0x0020  /* CCK channel */
120 #define IEEE80211_CHAN_OFDM     0x0040  /* OFDM channel */
121 #define IEEE80211_CHAN_2GHZ     0x0080  /* 2 GHz spectrum channel. */
122 #define IEEE80211_CHAN_5GHZ     0x0100  /* 5 GHz spectrum channel */
123 #define IEEE80211_CHAN_PASSIVE  0x0200  /* Only passive scan allowed */
124 #define IEEE80211_CHAN_DYN      0x0400  /* Dynamic CCK-OFDM channel */
125 #define IEEE80211_CHAN_GFSK     0x0800  /* GFSK channel (FHSS PHY) */
126
127 /*
128  * Useful combinations of channel characteristics.
129  */
130 #define IEEE80211_CHAN_FHSS \
131         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
132 #define IEEE80211_CHAN_A \
133         (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
134 #define IEEE80211_CHAN_B \
135         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
136 #define IEEE80211_CHAN_PUREG \
137         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
138 #define IEEE80211_CHAN_G \
139         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
140 #define IEEE80211_CHAN_T \
141         (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
142 #define IEEE80211_CHAN_108G \
143         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO)
144
145 #define IEEE80211_CHAN_ALL \
146         (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
147          IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)
148 #define IEEE80211_CHAN_ALLTURBO \
149         (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO)
150
151 #define IEEE80211_IS_CHAN_FHSS(_c) \
152         (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
153 #define IEEE80211_IS_CHAN_A(_c) \
154         (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
155 #define IEEE80211_IS_CHAN_B(_c) \
156         (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
157 #define IEEE80211_IS_CHAN_PUREG(_c) \
158         (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
159 #define IEEE80211_IS_CHAN_G(_c) \
160         (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
161 #define IEEE80211_IS_CHAN_ANYG(_c) \
162         (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
163 #define IEEE80211_IS_CHAN_T(_c) \
164         (((_c)->ic_flags & IEEE80211_CHAN_T) == IEEE80211_CHAN_T)
165 #define IEEE80211_IS_CHAN_108G(_c) \
166         (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
167
168 #define IEEE80211_IS_CHAN_2GHZ(_c) \
169         (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
170 #define IEEE80211_IS_CHAN_5GHZ(_c) \
171         (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
172 #define IEEE80211_IS_CHAN_OFDM(_c) \
173         (((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0)
174 #define IEEE80211_IS_CHAN_CCK(_c) \
175         (((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0)
176 #define IEEE80211_IS_CHAN_GFSK(_c) \
177         (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
178
179 /* ni_chan encoding for FH phy */
180 #define IEEE80211_FH_CHANMOD    80
181 #define IEEE80211_FH_CHAN(set,pat)      (((set)-1)*IEEE80211_FH_CHANMOD+(pat))
182 #define IEEE80211_FH_CHANSET(chan)      ((chan)/IEEE80211_FH_CHANMOD+1)
183 #define IEEE80211_FH_CHANPAT(chan)      ((chan)%IEEE80211_FH_CHANMOD)
184
185 /*
186  * 802.11 rate set.
187  */
188 #define IEEE80211_RATE_SIZE     8               /* 802.11 standard */
189 #define IEEE80211_RATE_MAXSIZE  15              /* max rates we'll handle */
190
191 struct ieee80211_rateset {
192         u_int8_t                rs_nrates;
193         u_int8_t                rs_rates[IEEE80211_RATE_MAXSIZE];
194 };
195
196 #endif /* _NET80211__IEEE80211_H_ */