]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/net80211/ieee80211_input.h
Upgrade Unbound to 1.6.4. More to follow.
[FreeBSD/FreeBSD.git] / sys / net80211 / ieee80211_input.h
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26  *
27  * $FreeBSD$
28  */
29 #ifndef _NET80211_IEEE80211_INPUT_H_
30 #define _NET80211_IEEE80211_INPUT_H_
31
32 /* Verify the existence and length of __elem or get out. */
33 #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do {        \
34         if ((__elem) == NULL) {                                         \
35                 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID,            \
36                     wh, NULL, "%s", "no " #__elem );                    \
37                 vap->iv_stats.is_rx_elem_missing++;                     \
38                 _action;                                                \
39         } else if ((__elem)[1] > (__maxlen)) {                          \
40                 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID,            \
41                     wh, NULL, "bad " #__elem " len %d", (__elem)[1]);   \
42                 vap->iv_stats.is_rx_elem_toobig++;                      \
43                 _action;                                                \
44         }                                                               \
45 } while (0)
46
47 #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do {            \
48         if ((_len) < (_minlen)) {                                       \
49                 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID,            \
50                     wh, NULL, "ie too short, got %d, expected %d",      \
51                     (_len), (_minlen));                                 \
52                 vap->iv_stats.is_rx_elem_toosmall++;                    \
53                 _action;                                                \
54         }                                                               \
55 } while (0)
56
57 #ifdef IEEE80211_DEBUG
58 void    ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag,
59         uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid);
60
61 #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do {                 \
62         if ((_ssid)[1] != 0 &&                                          \
63             ((_ssid)[1] != (_ni)->ni_esslen ||                          \
64             memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) {   \
65                 if (ieee80211_msg_input(vap))                           \
66                         ieee80211_ssid_mismatch(vap,                    \
67                             ieee80211_mgt_subtype_name(subtype),        \
68                                 wh->i_addr2, _ssid);                    \
69                 vap->iv_stats.is_rx_ssidmismatch++;                     \
70                 _action;                                                \
71         }                                                               \
72 } while (0)
73 #else /* !IEEE80211_DEBUG */
74 #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do {                 \
75         if ((_ssid)[1] != 0 &&                                          \
76             ((_ssid)[1] != (_ni)->ni_esslen ||                          \
77             memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) {   \
78                 vap->iv_stats.is_rx_ssidmismatch++;                     \
79                 _action;                                                \
80         }                                                               \
81 } while (0)
82 #endif /* !IEEE80211_DEBUG */
83
84 #include <sys/endian.h>         /* For le16toh() / le32dec() */
85
86 static __inline int
87 iswpaoui(const uint8_t *frm)
88 {
89         return frm[1] > 3 && le32dec(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
90 }
91
92 static __inline int
93 iswmeoui(const uint8_t *frm)
94 {
95         return frm[1] > 3 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI);
96 }
97
98 static __inline int
99 iswmeparam(const uint8_t *frm)
100 {
101         return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
102                 frm[6] == WME_PARAM_OUI_SUBTYPE;
103 }
104
105 static __inline int
106 iswmeinfo(const uint8_t *frm)
107 {
108         return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
109                 frm[6] == WME_INFO_OUI_SUBTYPE;
110 }
111
112 static __inline int
113 isatherosoui(const uint8_t *frm)
114 {
115         return frm[1] > 3 && le32dec(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
116 }
117
118 static __inline int
119 istdmaoui(const uint8_t *frm)
120 {
121         return frm[1] > 3 && le32dec(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI);
122 }
123
124 static __inline int
125 ishtcapoui(const uint8_t *frm)
126 {
127         return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI);
128 }
129
130 static __inline int
131 ishtinfooui(const uint8_t *frm)
132 {
133         return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI);
134 }
135
136 static __inline int
137 ieee80211_check_rxseq_amsdu(const struct ieee80211_rx_stats *rxs)
138 {
139
140         return (!! (rxs->c_pktflags & IEEE80211_RX_F_AMSDU));
141 }
142
143 /*
144  * Return 1 if the rxseq check should increment the sequence
145  * number. Return 0 if it's part of an AMSDU batch and it isn't
146  * the final frame in the decap'ed burst.
147  */
148 static __inline int
149 ieee80211_check_rxseq_amsdu_more(const struct ieee80211_rx_stats *rxs)
150 {
151         /* No state? ok */
152         if (rxs == NULL)
153                 return (1);
154
155         /* State but no AMSDU set? ok */
156         if ((rxs->c_pktflags & IEEE80211_RX_F_AMSDU) == 0)
157                 return (1);
158
159         /* State, AMSDU set, then _MORE means "don't inc yet" */
160         if (rxs->c_pktflags & IEEE80211_RX_F_AMSDU_MORE) {
161                 return (0);
162         }
163
164         /* Both are set, so return ok */
165         return (1);
166 }
167
168 /*
169  * Check the current frame sequence number against the current TID
170  * state and return whether it's in sequence or should be dropped.
171  *
172  * Since out of order packet and duplicate packet eliminations should
173  * be done by the AMPDU RX code, this routine blindly accepts all
174  * frames from a HT station w/ a TID that is currently doing AMPDU-RX.
175  * HT stations without WME or where the TID is not doing AMPDU-RX
176  * are checked like non-HT stations.
177  *
178  * The routine only eliminates packets whose sequence/fragment
179  * match or are less than the last seen sequence/fragment number
180  * AND are retransmits It doesn't try to eliminate out of order packets.
181  *
182  * Since all frames after sequence number 4095 will be less than 4095
183  * (as the seqnum wraps), handle that special case so packets aren't
184  * incorrectly dropped - ie, if the next packet is sequence number 0
185  * but a retransmit since the initial packet didn't make it.
186  *
187  * XXX TODO: handle sequence number space wrapping with dropped frames;
188  * especially in high interference conditions under high traffic load
189  * The RX AMPDU reorder code also needs it.
190  *
191  * XXX TODO: update for 802.11-2012 9.3.2.10 Duplicate Detection and Recovery.
192  */
193 static __inline int
194 ieee80211_check_rxseq(struct ieee80211_node *ni, struct ieee80211_frame *wh,
195     uint8_t *bssid, const struct ieee80211_rx_stats *rxs)
196 {
197 #define SEQ_LEQ(a,b)    ((int)((a)-(b)) <= 0)
198 #define SEQ_EQ(a,b)     ((int)((a)-(b)) == 0)
199 #define SEQNO(a)        ((a) >> IEEE80211_SEQ_SEQ_SHIFT)
200 #define FRAGNO(a)       ((a) & IEEE80211_SEQ_FRAG_MASK)
201         struct ieee80211vap *vap = ni->ni_vap;
202         uint16_t rxseq;
203         uint8_t type, subtype;
204         uint8_t tid;
205         struct ieee80211_rx_ampdu *rap;
206
207         rxseq = le16toh(*(uint16_t *)wh->i_seq);
208         type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
209         subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
210
211         /*
212          * Types with no sequence number (or QoS (+)Null frames)
213          * are always treated valid.
214          */
215         if (! IEEE80211_HAS_SEQ(type, subtype))
216                 return 1;
217
218         /*
219          * Always allow multicast frames for now - QoS (any TID)
220          * or not.
221          */
222         if (IEEE80211_IS_MULTICAST(wh->i_addr1))
223                 return 1;
224
225         tid = ieee80211_gettid(wh);
226
227         /*
228          * Only do the HT AMPDU check for WME stations; non-WME HT stations
229          * shouldn't exist outside of debugging. We should at least
230          * handle that.
231          */
232         if (tid < WME_NUM_TID) {
233                 rap = &ni->ni_rx_ampdu[tid];
234                 /* HT nodes currently doing RX AMPDU are always valid */
235                 if ((ni->ni_flags & IEEE80211_NODE_HT) &&
236                     (rap->rxa_flags & IEEE80211_AGGR_RUNNING))
237                         goto ok;
238         }
239
240         /*      
241          * Otherwise, retries for packets below or equal to the last
242          * seen sequence number should be dropped.
243          */
244
245         /*
246          * Treat frame seqnum 4095 as special due to boundary
247          * wrapping conditions.
248          */
249         if (SEQNO(ni->ni_rxseqs[tid]) == 4095) {
250                 /*
251                  * Drop retransmits on seqnum 4095/current fragment for itself.
252                  */
253                 if (SEQ_EQ(rxseq, ni->ni_rxseqs[tid]) &&
254                     (wh->i_fc[1] & IEEE80211_FC1_RETRY))
255                         goto fail;
256                 /*
257                  * Treat any subsequent frame as fine if the last seen frame
258                  * is 4095 and it's not a retransmit for the same sequence
259                  * number. However, this doesn't capture incorrectly ordered
260                  * fragments w/ sequence number 4095. It shouldn't be seen
261                  * in practice, but see the comment above for further info.
262                  */
263                 goto ok;
264         }
265
266         /*
267          * At this point we assume that retransmitted seq/frag numbers below
268          * the current can simply be eliminated.
269          */
270         if ((wh->i_fc[1] & IEEE80211_FC1_RETRY) &&
271             SEQ_LEQ(rxseq, ni->ni_rxseqs[tid]))
272                 goto fail;
273
274 ok:
275         /*
276          * Only bump the sequence number if it's the last frame
277          * in a batch.  That way frames in the rest of the batch
278          * get included, and the last frame in the batch kicks
279          * it next.
280          */
281         if (ieee80211_check_rxseq_amsdu_more(rxs)) {
282                 ni->ni_rxseqs[tid] = rxseq;
283                 if ((rxs != NULL) && ieee80211_check_rxseq_amsdu(rxs))
284                         IEEE80211_NODE_STAT(ni, rx_amsdu_more_end);
285         } else {
286                 /* .. still waiting */
287                 IEEE80211_NODE_STAT(ni, rx_amsdu_more);
288         }
289
290         return 1;
291
292 fail:
293         /* duplicate, discard */
294         IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate",
295             "seqno <%u,%u> fragno <%u,%u> tid %u",
296              SEQNO(rxseq),  SEQNO(ni->ni_rxseqs[tid]),
297             FRAGNO(rxseq), FRAGNO(ni->ni_rxseqs[tid]), tid);
298         vap->iv_stats.is_rx_dup++;
299         IEEE80211_NODE_STAT(ni, rx_dup);
300
301         return 0;
302 #undef  SEQ_LEQ
303 #undef  SEQ_EQ
304 #undef  SEQNO
305 #undef  FRAGNO
306 }
307
308 void    ieee80211_deliver_data(struct ieee80211vap *,
309                 struct ieee80211_node *, struct mbuf *);
310 struct mbuf *ieee80211_defrag(struct ieee80211_node *,
311                 struct mbuf *, int);
312 struct mbuf *ieee80211_realign(struct ieee80211vap *, struct mbuf *, size_t);
313 struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int);
314 struct mbuf *ieee80211_decap1(struct mbuf *, int *);
315 int     ieee80211_setup_rates(struct ieee80211_node *ni,
316                 const uint8_t *rates, const uint8_t *xrates, int flags);
317 void ieee80211_send_error(struct ieee80211_node *,
318                 const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg);
319 int     ieee80211_alloc_challenge(struct ieee80211_node *);
320 int     ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *,
321                 struct ieee80211_channel *,
322                 struct ieee80211_scanparams *);
323 int     ieee80211_parse_action(struct ieee80211_node *, struct mbuf *);
324 #endif /* _NET80211_IEEE80211_INPUT_H_ */