2 * Copyright (c) 2001 Atsushi Onoe
3 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 #ifndef _NET80211_IEEE80211_IOCTL_H_
29 #define _NET80211_IEEE80211_IOCTL_H_
34 #include <net80211/_ieee80211.h>
35 #include <net80211/ieee80211.h>
36 #include <net80211/ieee80211_crypto.h>
39 * Per/node (station) statistics.
41 struct ieee80211_nodestats {
42 uint32_t ns_rx_data; /* rx data frames */
43 uint32_t ns_rx_mgmt; /* rx management frames */
44 uint32_t ns_rx_ctrl; /* rx control frames */
45 uint32_t ns_rx_ucast; /* rx unicast frames */
46 uint32_t ns_rx_mcast; /* rx multi/broadcast frames */
47 uint64_t ns_rx_bytes; /* rx data count (bytes) */
48 uint64_t ns_rx_beacons; /* rx beacon frames */
49 uint32_t ns_rx_proberesp; /* rx probe response frames */
51 uint32_t ns_rx_dup; /* rx discard 'cuz dup */
52 uint32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */
53 uint32_t ns_rx_wepfail; /* rx wep processing failed */
54 uint32_t ns_rx_demicfail; /* rx demic failed */
55 uint32_t ns_rx_decap; /* rx decapsulation failed */
56 uint32_t ns_rx_defrag; /* rx defragmentation failed */
57 uint32_t ns_rx_disassoc; /* rx disassociation */
58 uint32_t ns_rx_deauth; /* rx deauthentication */
59 uint32_t ns_rx_action; /* rx action */
60 uint32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */
61 uint32_t ns_rx_unauth; /* rx on unauthorized port */
62 uint32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */
63 uint32_t ns_rx_drop; /* rx discard other reason */
65 uint32_t ns_tx_data; /* tx data frames */
66 uint32_t ns_tx_mgmt; /* tx management frames */
67 uint32_t ns_tx_ucast; /* tx unicast frames */
68 uint32_t ns_tx_mcast; /* tx multi/broadcast frames */
69 uint64_t ns_tx_bytes; /* tx data count (bytes) */
70 uint32_t ns_tx_probereq; /* tx probe request frames */
72 uint32_t ns_tx_novlantag; /* tx discard 'cuz no tag */
73 uint32_t ns_tx_vlanmismatch; /* tx discard 'cuz bad tag */
75 uint32_t ns_ps_discard; /* ps discard 'cuz of age */
77 /* MIB-related state */
78 uint32_t ns_tx_assoc; /* [re]associations */
79 uint32_t ns_tx_assoc_fail; /* [re]association failures */
80 uint32_t ns_tx_auth; /* [re]authentications */
81 uint32_t ns_tx_auth_fail; /* [re]authentication failures*/
82 uint32_t ns_tx_deauth; /* deauthentications */
83 uint32_t ns_tx_deauth_code; /* last deauth reason */
84 uint32_t ns_tx_disassoc; /* disassociations */
85 uint32_t ns_tx_disassoc_code; /* last disassociation reason */
91 struct ieee80211_stats {
92 uint32_t is_rx_badversion; /* rx frame with bad version */
93 uint32_t is_rx_tooshort; /* rx frame too short */
94 uint32_t is_rx_wrongbss; /* rx from wrong bssid */
95 uint32_t is_rx_dup; /* rx discard 'cuz dup */
96 uint32_t is_rx_wrongdir; /* rx w/ wrong direction */
97 uint32_t is_rx_mcastecho; /* rx discard 'cuz mcast echo */
98 uint32_t is_rx_notassoc; /* rx discard 'cuz sta !assoc */
99 uint32_t is_rx_noprivacy; /* rx w/ wep but privacy off */
100 uint32_t is_rx_unencrypted; /* rx w/o wep and privacy on */
101 uint32_t is_rx_wepfail; /* rx wep processing failed */
102 uint32_t is_rx_decap; /* rx decapsulation failed */
103 uint32_t is_rx_mgtdiscard; /* rx discard mgt frames */
104 uint32_t is_rx_ctl; /* rx discard ctrl frames */
105 uint32_t is_rx_beacon; /* rx beacon frames */
106 uint32_t is_rx_rstoobig; /* rx rate set truncated */
107 uint32_t is_rx_elem_missing; /* rx required element missing*/
108 uint32_t is_rx_elem_toobig; /* rx element too big */
109 uint32_t is_rx_elem_toosmall; /* rx element too small */
110 uint32_t is_rx_elem_unknown; /* rx element unknown */
111 uint32_t is_rx_badchan; /* rx frame w/ invalid chan */
112 uint32_t is_rx_chanmismatch; /* rx frame chan mismatch */
113 uint32_t is_rx_nodealloc; /* rx frame dropped */
114 uint32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */
115 uint32_t is_rx_auth_unsupported; /* rx w/ unsupported auth alg */
116 uint32_t is_rx_auth_fail; /* rx sta auth failure */
117 uint32_t is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */
118 uint32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */
119 uint32_t is_rx_assoc_notauth; /* rx assoc w/o auth */
120 uint32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */
121 uint32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */
122 uint32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */
123 uint32_t is_rx_deauth; /* rx deauthentication */
124 uint32_t is_rx_disassoc; /* rx disassociation */
125 uint32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/
126 uint32_t is_rx_nobuf; /* rx failed for lack of buf */
127 uint32_t is_rx_decryptcrc; /* rx decrypt failed on crc */
128 uint32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/
129 uint32_t is_rx_bad_auth; /* rx bad auth request */
130 uint32_t is_rx_unauth; /* rx on unauthorized port */
131 uint32_t is_rx_badkeyid; /* rx w/ incorrect keyid */
132 uint32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */
133 uint32_t is_rx_ccmpformat; /* rx format bad (CCMP) */
134 uint32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */
135 uint32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */
136 uint32_t is_rx_tkipformat; /* rx format bad (TKIP) */
137 uint32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */
138 uint32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */
139 uint32_t is_rx_badcipher; /* rx failed 'cuz key type */
140 uint32_t is_rx_nocipherctx; /* rx failed 'cuz key !setup */
141 uint32_t is_rx_acl; /* rx discard 'cuz acl policy */
142 uint32_t is_tx_nobuf; /* tx failed for lack of buf */
143 uint32_t is_tx_nonode; /* tx failed for no node */
144 uint32_t is_tx_unknownmgt; /* tx of unknown mgt frame */
145 uint32_t is_tx_badcipher; /* tx failed 'cuz key type */
146 uint32_t is_tx_nodefkey; /* tx failed 'cuz no defkey */
147 uint32_t is_tx_noheadroom; /* tx failed 'cuz no space */
148 uint32_t is_tx_fragframes; /* tx frames fragmented */
149 uint32_t is_tx_frags; /* tx fragments created */
150 uint32_t is_scan_active; /* active scans started */
151 uint32_t is_scan_passive; /* passive scans started */
152 uint32_t is_node_timeout; /* nodes timed out inactivity */
153 uint32_t is_crypto_nomem; /* no memory for crypto ctx */
154 uint32_t is_crypto_tkip; /* tkip crypto done in s/w */
155 uint32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */
156 uint32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */
157 uint32_t is_crypto_tkipcm; /* tkip counter measures */
158 uint32_t is_crypto_ccmp; /* ccmp crypto done in s/w */
159 uint32_t is_crypto_wep; /* wep crypto done in s/w */
160 uint32_t is_crypto_setkey_cipher;/* cipher rejected key */
161 uint32_t is_crypto_setkey_nokey; /* no key index for setkey */
162 uint32_t is_crypto_delkey; /* driver key delete failed */
163 uint32_t is_crypto_badcipher; /* unknown cipher */
164 uint32_t is_crypto_nocipher; /* cipher not available */
165 uint32_t is_crypto_attachfail; /* cipher attach failed */
166 uint32_t is_crypto_swfallback; /* cipher fallback to s/w */
167 uint32_t is_crypto_keyfail; /* driver key alloc failed */
168 uint32_t is_crypto_enmicfail; /* en-MIC failed */
169 uint32_t is_ibss_capmismatch; /* merge failed-cap mismatch */
170 uint32_t is_ibss_norate; /* merge failed-rate mismatch */
171 uint32_t is_ps_unassoc; /* ps-poll for unassoc. sta */
172 uint32_t is_ps_badaid; /* ps-poll w/ incorrect aid */
173 uint32_t is_ps_qempty; /* ps-poll w/ nothing to send */
174 uint32_t is_ff_badhdr; /* fast frame rx'd w/ bad hdr */
175 uint32_t is_ff_tooshort; /* fast frame rx decap error */
176 uint32_t is_ff_split; /* fast frame rx split error */
177 uint32_t is_ff_decap; /* fast frames decap'd */
178 uint32_t is_ff_encap; /* fast frames encap'd for tx */
179 uint32_t is_rx_badbintval; /* rx frame w/ bogus bintval */
180 uint32_t is_rx_demicfail; /* rx demic failed */
181 uint32_t is_rx_defrag; /* rx defragmentation failed */
182 uint32_t is_rx_mgmt; /* rx management frames */
183 uint32_t is_rx_action; /* rx action mgt frames */
184 uint32_t is_amsdu_tooshort; /* A-MSDU rx decap error */
185 uint32_t is_amsdu_split; /* A-MSDU rx split error */
186 uint32_t is_amsdu_decap; /* A-MSDU decap'd */
187 uint32_t is_amsdu_encap; /* A-MSDU encap'd for tx */
188 uint32_t is_ampdu_bar_bad; /* A-MPDU BAR out of window */
189 uint32_t is_ampdu_bar_oow; /* A-MPDU BAR before ADDBA */
190 uint32_t is_ampdu_bar_move; /* A-MPDU BAR moved window */
191 uint32_t is_ampdu_bar_rx; /* A-MPDU BAR frames handled */
192 uint32_t is_ampdu_rx_flush; /* A-MPDU frames flushed */
193 uint32_t is_ampdu_rx_oor; /* A-MPDU frames out-of-order */
194 uint32_t is_ampdu_rx_copy; /* A-MPDU frames copied down */
195 uint32_t is_ampdu_rx_drop; /* A-MPDU frames dropped */
196 uint32_t is_tx_badstate; /* tx discard state != RUN */
197 uint32_t is_tx_notassoc; /* tx failed, sta not assoc */
198 uint32_t is_tx_classify; /* tx classification failed */
199 uint32_t is_dwds_mcast; /* discard mcast over dwds */
200 uint32_t is_dwds_qdrop; /* dwds pending frame q full */
201 uint32_t is_ht_assoc_nohtcap; /* non-HT sta rejected */
202 uint32_t is_ht_assoc_downgrade; /* HT sta forced to legacy */
203 uint32_t is_ht_assoc_norate; /* HT assoc w/ rate mismatch */
204 uint32_t is_ampdu_rx_age; /* A-MPDU sent up 'cuz of age */
205 uint32_t is_ampdu_rx_move; /* A-MPDU MSDU moved window */
206 uint32_t is_addba_reject; /* ADDBA reject 'cuz disabled */
207 uint32_t is_addba_norequest; /* ADDBA response w/o ADDBA */
208 uint32_t is_addba_badtoken; /* ADDBA response w/ wrong
210 uint32_t is_ampdu_stop; /* A-MPDU stream stopped */
211 uint32_t is_ampdu_stop_failed; /* A-MPDU stream not running */
212 uint32_t is_ampdu_rx_reorder; /* A-MPDU held for rx reorder */
213 uint32_t is_scan_bg; /* background scans started */
214 uint8_t is_rx_deauth_code; /* last rx'd deauth reason */
215 uint8_t is_rx_disassoc_code; /* last rx'd disassoc reason */
216 uint8_t is_rx_authfail_code; /* last rx'd auth fail reason */
217 uint32_t is_beacon_miss; /* beacon miss notification */
218 uint32_t is_spare[14];
222 * Max size of optional information elements. We artificially
223 * constrain this; it's limited only by the max frame size (and
224 * the max parameter size of the wireless extensions).
226 #define IEEE80211_MAX_OPT_IE 256
229 * WPA/RSN get/set key request. Specify the key/cipher
230 * type and whether the key is to be used for sending and/or
231 * receiving. The key index should be set only when working
232 * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
233 * Otherwise a unicast/pairwise key is specified by the bssid
234 * (on a station) or mac address (on an ap). They key length
235 * must include any MIC key data; otherwise it should be no
236 * more than IEEE80211_KEYBUF_SIZE.
238 struct ieee80211req_key {
239 uint8_t ik_type; /* key/cipher type */
241 uint16_t ik_keyix; /* key index */
242 uint8_t ik_keylen; /* key length in bytes */
244 /* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */
245 #define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
246 uint8_t ik_macaddr[IEEE80211_ADDR_LEN];
247 uint64_t ik_keyrsc; /* key receive sequence counter */
248 uint64_t ik_keytsc; /* key transmit sequence counter */
249 uint8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
253 * Delete a key either by index or address. Set the index
254 * to IEEE80211_KEYIX_NONE when deleting a unicast key.
256 struct ieee80211req_del_key {
257 uint8_t idk_keyix; /* key index */
258 uint8_t idk_macaddr[IEEE80211_ADDR_LEN];
262 * MLME state manipulation request. IEEE80211_MLME_ASSOC
263 * only makes sense when operating as a station. The other
264 * requests can be used when operating as a station or an
265 * ap (to effect a station).
267 struct ieee80211req_mlme {
268 uint8_t im_op; /* operation to perform */
269 #define IEEE80211_MLME_ASSOC 1 /* associate station */
270 #define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
271 #define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
272 #define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
273 #define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
274 #define IEEE80211_MLME_AUTH 6 /* authenticate station */
275 uint8_t im_ssid_len; /* length of optional ssid */
276 uint16_t im_reason; /* 802.11 reason code */
277 uint8_t im_macaddr[IEEE80211_ADDR_LEN];
278 uint8_t im_ssid[IEEE80211_NWID_LEN];
282 * MAC ACL operations.
285 IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACL's */
286 IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */
287 IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */
288 IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */
289 IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */
290 IEEE80211_MACCMD_POLICY = 5, /* get ACL policy */
291 IEEE80211_MACCMD_LIST = 6, /* get ACL database */
292 IEEE80211_MACCMD_POLICY_RADIUS = 7, /* set policy: RADIUS managed */
295 struct ieee80211req_maclist {
296 uint8_t ml_macaddr[IEEE80211_ADDR_LEN];
300 * Set the active channel list. Note this list is
301 * intersected with the available channel list in
302 * calculating the set of channels actually used in
305 struct ieee80211req_chanlist {
306 uint8_t ic_channels[IEEE80211_CHAN_BYTES];
310 * Get the active channel list info.
312 struct ieee80211req_chaninfo {
314 struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX];
318 * Retrieve the WPA/RSN information element for an associated station.
320 struct ieee80211req_wpaie { /* old version w/ only one ie */
321 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
322 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
324 struct ieee80211req_wpaie2 {
325 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
326 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
327 uint8_t rsn_ie[IEEE80211_MAX_OPT_IE];
331 * Retrieve per-node statistics.
333 struct ieee80211req_sta_stats {
335 /* NB: explicitly force 64-bit alignment */
336 uint8_t macaddr[IEEE80211_ADDR_LEN];
339 struct ieee80211_nodestats is_stats;
343 * Station information block; the mac address is used
344 * to retrieve other data like stats, unicast key, etc.
346 struct ieee80211req_sta_info {
347 uint16_t isi_len; /* total length (mult of 4) */
348 uint16_t isi_ie_off; /* offset to IE data */
349 uint16_t isi_ie_len; /* IE length */
350 uint16_t isi_freq; /* MHz */
351 uint32_t isi_flags; /* channel flags */
352 uint16_t isi_state; /* state flags */
353 uint8_t isi_authmode; /* authentication algorithm */
354 int8_t isi_rssi; /* receive signal strength */
355 int8_t isi_noise; /* noise floor */
356 uint8_t isi_capinfo; /* capabilities */
357 uint8_t isi_erp; /* ERP element */
358 uint8_t isi_macaddr[IEEE80211_ADDR_LEN];
360 /* negotiated rates */
361 uint8_t isi_rates[IEEE80211_RATE_MAXSIZE];
362 uint8_t isi_txrate; /* legacy/IEEE rate or MCS */
363 uint16_t isi_associd; /* assoc response */
364 uint16_t isi_txpower; /* current tx power */
365 uint16_t isi_vlan; /* vlan tag */
366 /* NB: [IEEE80211_NONQOS_TID] holds seq#'s for non-QoS stations */
367 uint16_t isi_txseqs[IEEE80211_TID_SIZE];/* tx seq #/TID */
368 uint16_t isi_rxseqs[IEEE80211_TID_SIZE];/* rx seq#/TID */
369 uint16_t isi_inact; /* inactivity timer */
370 uint16_t isi_txmbps; /* current tx rate in .5 Mb/s */
371 uint32_t isi_jointime; /* time of assoc/join */
372 struct ieee80211_mimo_info isi_mimo; /* MIMO info for 11n sta's */
373 /* XXX frag state? */
374 /* variable length IE data */
378 * Retrieve per-station information; to retrieve all
379 * specify a mac address of ff:ff:ff:ff:ff:ff.
381 struct ieee80211req_sta_req {
383 /* NB: explicitly force 64-bit alignment */
384 uint8_t macaddr[IEEE80211_ADDR_LEN];
387 struct ieee80211req_sta_info info[1]; /* variable length */
391 * Get/set per-station tx power cap.
393 struct ieee80211req_sta_txpow {
394 uint8_t it_macaddr[IEEE80211_ADDR_LEN];
399 * WME parameters manipulated with IEEE80211_IOC_WME_CWMIN
400 * through IEEE80211_IOC_WME_ACKPOLICY are set and return
401 * using i_val and i_len. i_val holds the value itself.
402 * i_len specifies the AC and, as appropriate, then high bit
403 * specifies whether the operation is to be applied to the
406 #define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */
407 #define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */
408 #define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */
411 * Application Information Elements can be appended to a variety
412 * of frames with the IEE80211_IOC_APPIE request. This request
413 * piggybacks on a normal ieee80211req; the frame type is passed
414 * in i_val as the 802.11 FC0 bytes and the length of the IE data
415 * is passed in i_len. The data is referenced in i_data. If i_len
416 * is zero then any previously configured IE data is removed. At
417 * most IEEE80211_MAX_APPIE data be appened. Note that multiple
418 * IE's can be supplied; the data is treated opaquely.
420 #define IEEE80211_MAX_APPIE 1024 /* max app IE data */
422 * Hack: the WPA authenticator uses this mechanism to specify WPA
423 * ie's that are used instead of the ones normally constructed using
424 * the cipher state setup with separate ioctls. This avoids issues
425 * like the authenticator ordering ie data differently than the
426 * net80211 layer and needing to keep separate state for WPA and RSN.
428 #define IEEE80211_APPIE_WPA \
429 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON | \
430 IEEE80211_FC0_SUBTYPE_PROBE_RESP)
433 * Station mode roaming parameters. These are maintained
434 * per band/mode and control the roaming algorithm.
436 struct ieee80211_roamparams_req {
437 struct ieee80211_roamparam params[IEEE80211_MODE_MAX];
441 * Transmit parameters. These can be used to set fixed transmit
442 * rate for each operating mode when operating as client or on a
443 * per-client basis according to the capabilities of the client
444 * (e.g. an 11b client associated to an 11g ap) when operating as
447 * MCS are distinguished from legacy rates by or'ing in 0x80.
449 struct ieee80211_txparams_req {
450 struct ieee80211_txparam params[IEEE80211_MODE_MAX];
454 * Set regulatory domain state with IEEE80211_IOC_REGDOMAIN.
455 * Note this is both the regulatory description and the channel
456 * list. The get request for IEEE80211_IOC_REGDOMAIN returns
457 * only the regdomain info; the channel list is obtained
458 * separately with IEEE80211_IOC_CHANINFO.
460 struct ieee80211_regdomain_req {
461 struct ieee80211_regdomain rd;
462 struct ieee80211req_chaninfo chaninfo;
466 * Get driver capabilities. Driver, hardware crypto, and
467 * HT/802.11n capabilities, and a table that describes what
470 struct ieee80211_devcaps_req {
471 uint32_t dc_drivercaps; /* general driver caps */
472 uint32_t dc_cryptocaps; /* hardware crypto support */
473 uint32_t dc_htcaps; /* HT/802.11n support */
474 struct ieee80211req_chaninfo dc_chaninfo;
477 struct ieee80211_chanswitch_req {
478 struct ieee80211_channel csa_chan; /* new channel */
479 int csa_mode; /* CSA mode */
480 int csa_count; /* beacon count to switch */
484 * Get/set per-station vlan tag.
486 struct ieee80211req_sta_vlan {
487 uint8_t sv_macaddr[IEEE80211_ADDR_LEN];
493 * FreeBSD-style ioctls.
495 /* the first member must be matched with struct ifreq */
496 struct ieee80211req {
497 char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
498 uint16_t i_type; /* req type */
499 int16_t i_val; /* Index or simple value */
500 int16_t i_len; /* Index or simple value */
501 void *i_data; /* Extra data */
503 #define SIOCS80211 _IOW('i', 234, struct ieee80211req)
504 #define SIOCG80211 _IOWR('i', 235, struct ieee80211req)
505 #define SIOCG80211STATS _IOWR('i', 236, struct ifreq)
507 #define IEEE80211_IOC_SSID 1
508 #define IEEE80211_IOC_NUMSSIDS 2
509 #define IEEE80211_IOC_WEP 3
510 #define IEEE80211_WEP_NOSUP -1
511 #define IEEE80211_WEP_OFF 0
512 #define IEEE80211_WEP_ON 1
513 #define IEEE80211_WEP_MIXED 2
514 #define IEEE80211_IOC_WEPKEY 4
515 #define IEEE80211_IOC_NUMWEPKEYS 5
516 #define IEEE80211_IOC_WEPTXKEY 6
517 #define IEEE80211_IOC_AUTHMODE 7
518 #define IEEE80211_IOC_STATIONNAME 8
519 #define IEEE80211_IOC_CHANNEL 9
520 #define IEEE80211_IOC_POWERSAVE 10
521 #define IEEE80211_POWERSAVE_NOSUP -1
522 #define IEEE80211_POWERSAVE_OFF 0
523 #define IEEE80211_POWERSAVE_CAM 1
524 #define IEEE80211_POWERSAVE_PSP 2
525 #define IEEE80211_POWERSAVE_PSP_CAM 3
526 #define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM
527 #define IEEE80211_IOC_POWERSAVESLEEP 11
528 #define IEEE80211_IOC_RTSTHRESHOLD 12
529 #define IEEE80211_IOC_PROTMODE 13
530 #define IEEE80211_PROTMODE_OFF 0
531 #define IEEE80211_PROTMODE_CTS 1
532 #define IEEE80211_PROTMODE_RTSCTS 2
533 #define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */
534 #define IEEE80211_IOC_BSSID 15
535 #define IEEE80211_IOC_ROAMING 16 /* roaming mode */
536 #define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */
537 #define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */
538 #define IEEE80211_IOC_WPAKEY 19
539 #define IEEE80211_IOC_DELKEY 20
540 #define IEEE80211_IOC_MLME 21
541 /* 22 was IEEE80211_IOC_OPTIE, replaced by IEEE80211_IOC_APPIE */
542 /* 23 was IEEE80211_IOC_SCAN_REQ */
543 /* 24 was IEEE80211_IOC_SCAN_RESULTS */
544 #define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */
545 #define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */
546 #define IEEE80211_IOC_CHANLIST 27 /* channel list */
547 #define IEEE80211_IOC_WME 28 /* WME mode (on, off) */
548 #define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */
549 #define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */
550 /* 31-35,37-38 were for WPA authenticator settings */
551 /* 36 was IEEE80211_IOC_DRIVER_CAPS */
552 #define IEEE80211_IOC_WPAIE 39 /* WPA information element */
553 #define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */
554 #define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */
555 #define IEEE80211_IOC_CHANINFO 42 /* channel info list */
556 #define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */
557 #define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */
558 /* 45 was IEEE80211_IOC_STA_INFO */
559 #define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */
560 #define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */
561 #define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */
562 #define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */
563 #define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */
564 #define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/
565 #define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */
566 #define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */
567 #define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */
568 #define IEEE80211_IOC_DELMAC 55 /* del sta from MAC ACL table */
569 #define IEEE80211_IOC_PUREG 56 /* pure 11g (no 11b stations) */
570 #define IEEE80211_IOC_FF 57 /* ATH fast frames (on, off) */
571 #define IEEE80211_IOC_TURBOP 58 /* ATH turbo' (on, off) */
572 #define IEEE80211_IOC_BGSCAN 59 /* bg scanning (on, off) */
573 #define IEEE80211_IOC_BGSCAN_IDLE 60 /* bg scan idle threshold */
574 #define IEEE80211_IOC_BGSCAN_INTERVAL 61 /* bg scan interval */
575 #define IEEE80211_IOC_SCANVALID 65 /* scan cache valid threshold */
576 /* 66-72 were IEEE80211_IOC_ROAM_* and IEEE80211_IOC_MCAST_RATE */
577 #define IEEE80211_IOC_FRAGTHRESHOLD 73 /* tx fragmentation threshold */
578 #define IEEE80211_IOC_BURST 75 /* packet bursting */
579 #define IEEE80211_IOC_SCAN_RESULTS 76 /* get scan results */
580 #define IEEE80211_IOC_BMISSTHRESHOLD 77 /* beacon miss threshold */
581 #define IEEE80211_IOC_STA_INFO 78 /* station/neighbor info */
582 #define IEEE80211_IOC_WPAIE2 79 /* WPA+RSN info elements */
583 #define IEEE80211_IOC_CURCHAN 80 /* current channel */
584 #define IEEE80211_IOC_SHORTGI 81 /* 802.11n half GI */
585 #define IEEE80211_IOC_AMPDU 82 /* 802.11n A-MPDU (on, off) */
586 #define IEEE80211_IOC_AMPDU_LIMIT 83 /* A-MPDU length limit */
587 #define IEEE80211_IOC_AMPDU_DENSITY 84 /* A-MPDU density */
588 #define IEEE80211_IOC_AMSDU 85 /* 802.11n A-MSDU (on, off) */
589 #define IEEE80211_IOC_AMSDU_LIMIT 86 /* A-MSDU length limit */
590 #define IEEE80211_IOC_PUREN 87 /* pure 11n (no legacy sta's) */
591 #define IEEE80211_IOC_DOTH 88 /* 802.11h (on, off) */
592 /* 89-91 were regulatory items */
593 #define IEEE80211_IOC_HTCOMPAT 92 /* support pre-D1.10 HT ie's */
594 #define IEEE80211_IOC_DWDS 93 /* DWDS/4-address handling */
595 #define IEEE80211_IOC_INACTIVITY 94 /* sta inactivity handling */
596 #define IEEE80211_IOC_APPIE 95 /* application IE's */
597 #define IEEE80211_IOC_WPS 96 /* WPS operation */
598 #define IEEE80211_IOC_TSN 97 /* TSN operation */
599 #define IEEE80211_IOC_DEVCAPS 98 /* driver+device capabilities */
600 #define IEEE80211_IOC_CHANSWITCH 99 /* start 11h channel switch */
601 #define IEEE80211_IOC_DFS 100 /* DFS (on, off) */
602 #define IEEE80211_IOC_DOTD 101 /* 802.11d (on, off) */
603 #define IEEE80211_IOC_HTPROTMODE 102 /* HT protection (off, rts) */
604 #define IEEE80211_IOC_SCAN_REQ 103 /* scan w/ specified params */
605 #define IEEE80211_IOC_SCAN_CANCEL 104 /* cancel ongoing scan */
606 #define IEEE80211_IOC_HTCONF 105 /* HT config (off, HT20, HT40)*/
607 #define IEEE80211_IOC_REGDOMAIN 106 /* regulatory domain info */
608 #define IEEE80211_IOC_ROAM 107 /* roaming params en masse */
609 #define IEEE80211_IOC_TXPARAMS 108 /* tx parameters */
610 #define IEEE80211_IOC_STA_VLAN 109 /* per-station vlan tag */
613 * Parameters for controlling a scan requested with
614 * IEEE80211_IOC_SCAN_REQ.
616 * Active scans cause ProbeRequest frames to be issued for each
617 * specified ssid and, by default, a broadcast ProbeRequest frame.
618 * The set of ssid's is specified in the request.
620 * By default the scan will cause a BSS to be joined (in station/adhoc
621 * mode) or a channel to be selected for operation (hostap mode).
622 * To disable that specify IEEE80211_IOC_SCAN_NOPICK and if the
624 * If the station is currently associated to an AP then a scan request
625 * will cause the station to leave the current channel and potentially
626 * miss frames from the AP. Alternatively the station may notify the
627 * AP that it is going into power save mode before it leaves the channel.
628 * This ensures frames for the station are buffered by the AP. This is
629 * termed a ``bg scan'' and is requested with the IEEE80211_IOC_SCAN_BGSCAN
630 * flag. Background scans may take longer than foreground scans and may
631 * be preempted by traffic. If a station is not associated to an AP
632 * then a request for a background scan is automatically done in the
635 * The results of the scan request are cached by the system. This
636 * information is aged out and/or invalidated based on events like not
637 * being able to associated to an AP. To flush the current cache
638 * contents before doing a scan the IEEE80211_IOC_SCAN_FLUSH flag may
641 * By default the scan will be done until a suitable AP is located
642 * or a channel is found for use. A scan can also be constrained
643 * to be done once (IEEE80211_IOC_SCAN_ONCE) or to last for no more
644 * than a specified duration.
646 struct ieee80211_scan_req {
648 #define IEEE80211_IOC_SCAN_NOPICK 0x00001 /* scan only, no selection */
649 #define IEEE80211_IOC_SCAN_ACTIVE 0x00002 /* active scan (probe req) */
650 #define IEEE80211_IOC_SCAN_PICK1ST 0x00004 /* ``hey sailor'' mode */
651 #define IEEE80211_IOC_SCAN_BGSCAN 0x00008 /* bg scan, exit ps at end */
652 #define IEEE80211_IOC_SCAN_ONCE 0x00010 /* do one complete pass */
653 #define IEEE80211_IOC_SCAN_NOBCAST 0x00020 /* don't send bcast probe req */
654 #define IEEE80211_IOC_SCAN_NOJOIN 0x00040 /* no auto-sequencing */
655 #define IEEE80211_IOC_SCAN_FLUSH 0x10000 /* flush scan cache first */
656 #define IEEE80211_IOC_SCAN_CHECK 0x20000 /* check scan cache first */
657 u_int sr_duration; /* duration (ms) */
658 #define IEEE80211_IOC_SCAN_DURATION_MIN 1
659 #define IEEE80211_IOC_SCAN_DURATION_MAX 0x7fffffff
660 #define IEEE80211_IOC_SCAN_FOREVER IEEE80211_IOC_SCAN_DURATION_MAX
661 u_int sr_mindwell; /* min channel dwelltime (ms) */
662 u_int sr_maxdwell; /* max channel dwelltime (ms) */
664 #define IEEE80211_IOC_SCAN_MAX_SSID 3
666 int len; /* length in bytes */
667 uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */
668 } sr_ssid[IEEE80211_IOC_SCAN_MAX_SSID];
672 * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
673 * Each result is a fixed size structure followed by a variable
674 * length SSID and one or more variable length information elements.
675 * The size of each variable length item is found in the fixed
676 * size structure and the entire length of the record is specified
677 * in isr_len. Result records are rounded to a multiple of 4 bytes.
679 struct ieee80211req_scan_result {
680 uint16_t isr_len; /* total length (mult of 4) */
681 uint16_t isr_ie_off; /* offset to SSID+IE data */
682 uint16_t isr_ie_len; /* IE length */
683 uint16_t isr_freq; /* MHz */
684 uint16_t isr_flags; /* channel flags */
687 uint8_t isr_intval; /* beacon interval */
688 uint8_t isr_capinfo; /* capabilities */
689 uint8_t isr_erp; /* ERP element */
690 uint8_t isr_bssid[IEEE80211_ADDR_LEN];
692 uint8_t isr_rates[IEEE80211_RATE_MAXSIZE];
693 uint8_t isr_ssid_len; /* SSID length */
694 /* variable length SSID followed by IE data */
698 * Virtual AP cloning parameters. The parent device must
699 * be a vap-capable device. All parameters specified with
700 * the clone request are fixed for the lifetime of the vap.
702 * There are two flavors of WDS vaps: legacy and dynamic.
703 * Legacy WDS operation implements a static binding between
704 * two stations encapsulating traffic in 4-address frames.
705 * Dynamic WDS vaps are created when a station associates to
706 * an AP and sends a 4-address frame. If the AP vap is
707 * configured to support WDS then this will generate an
708 * event to user programs listening on the routing socket
709 * and a Dynamic WDS vap will be created to handle traffic
710 * to/from that station. In both cases the bssid of the
711 * peer must be specified when creating the vap.
713 * By default a vap will inherit the mac address/bssid of
714 * the underlying device. To request a unique address the
715 * IEEE80211_CLONE_BSSID flag should be supplied. This is
716 * meaningless for WDS vaps as they share the bssid of an
717 * AP vap that must otherwise exist. Note that some devices
718 * may not be able to support multiple addresses.
720 * Station mode vap's normally depend on the device to notice
721 * when the AP stops sending beacon frames. If IEEE80211_CLONE_NOBEACONS
722 * is specified the net80211 layer will do this in s/w. This
723 * is mostly useful when setting up a WDS repeater/extender where
724 * an AP vap is combined with a sta vap and the device isn't able
725 * to track beacon frames in hardware.
727 struct ieee80211_clone_params {
728 char icp_parent[IFNAMSIZ]; /* parent device */
729 uint16_t icp_opmode; /* operating mode */
730 uint16_t icp_flags; /* see below */
731 uint8_t icp_bssid[IEEE80211_ADDR_LEN]; /* for WDS links */
732 uint8_t icp_macaddr[IEEE80211_ADDR_LEN];/* local address */
734 #define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */
735 #define IEEE80211_CLONE_NOBEACONS 0x0002 /* don't setup beacon timers */
736 #define IEEE80211_CLONE_WDSLEGACY 0x0004 /* legacy WDS processing */
737 #define IEEE80211_CLONE_MACADDR 0x0008 /* use specified mac addr */
738 #endif /* __FreeBSD__ */
740 #endif /* _NET80211_IEEE80211_IOCTL_H_ */