]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/net80211/ieee80211_node.c
MFV r308954:
[FreeBSD/FreeBSD.git] / sys / net80211 / ieee80211_node.c
1 /*-
2  * Copyright (c) 2001 Atsushi Onoe
3  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29
30 #include "opt_wlan.h"
31
32 #include <sys/param.h>
33 #include <sys/systm.h> 
34 #include <sys/mbuf.h>   
35 #include <sys/malloc.h>
36 #include <sys/kernel.h>
37
38 #include <sys/socket.h>
39  
40 #include <net/if.h>
41 #include <net/if_var.h>
42 #include <net/if_media.h>
43 #include <net/ethernet.h>
44
45 #include <net80211/ieee80211_var.h>
46 #include <net80211/ieee80211_input.h>
47 #ifdef IEEE80211_SUPPORT_SUPERG
48 #include <net80211/ieee80211_superg.h>
49 #endif
50 #ifdef IEEE80211_SUPPORT_TDMA
51 #include <net80211/ieee80211_tdma.h>
52 #endif
53 #include <net80211/ieee80211_wds.h>
54 #include <net80211/ieee80211_mesh.h>
55 #include <net80211/ieee80211_ratectl.h>
56
57 #include <net/bpf.h>
58
59 /*
60  * IEEE80211_NODE_HASHSIZE must be a power of 2.
61  */
62 CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0);
63
64 /*
65  * Association id's are managed with a bit vector.
66  */
67 #define IEEE80211_AID_SET(_vap, b) \
68         ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \
69                 (1 << (IEEE80211_AID(b) % 32)))
70 #define IEEE80211_AID_CLR(_vap, b) \
71         ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \
72                 ~(1 << (IEEE80211_AID(b) % 32)))
73 #define IEEE80211_AID_ISSET(_vap, b) \
74         ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32)))
75
76 static int ieee80211_sta_join1(struct ieee80211_node *);
77
78 static struct ieee80211_node *node_alloc(struct ieee80211vap *,
79         const uint8_t [IEEE80211_ADDR_LEN]);
80 static void node_cleanup(struct ieee80211_node *);
81 static void node_free(struct ieee80211_node *);
82 static void node_age(struct ieee80211_node *);
83 static int8_t node_getrssi(const struct ieee80211_node *);
84 static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *);
85 static void node_getmimoinfo(const struct ieee80211_node *,
86         struct ieee80211_mimo_info *);
87
88 static void _ieee80211_free_node(struct ieee80211_node *);
89
90 static void node_reclaim(struct ieee80211_node_table *nt,
91         struct ieee80211_node *ni);
92 static void ieee80211_node_table_init(struct ieee80211com *ic,
93         struct ieee80211_node_table *nt, const char *name,
94         int inact, int keymaxix);
95 static void ieee80211_node_table_reset(struct ieee80211_node_table *,
96         struct ieee80211vap *);
97 static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt);
98 static void ieee80211_erp_timeout(struct ieee80211com *);
99
100 MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state");
101 MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie");
102
103 void
104 ieee80211_node_attach(struct ieee80211com *ic)
105 {
106         /* XXX really want maxlen enforced per-sta */
107         ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8,
108             "802.11 staging q");
109         ieee80211_node_table_init(ic, &ic->ic_sta, "station",
110                 IEEE80211_INACT_INIT, ic->ic_max_keyix);
111         callout_init(&ic->ic_inact, 1);
112         callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
113                 ieee80211_node_timeout, ic);
114
115         ic->ic_node_alloc = node_alloc;
116         ic->ic_node_free = node_free;
117         ic->ic_node_cleanup = node_cleanup;
118         ic->ic_node_age = node_age;
119         ic->ic_node_drain = node_age;           /* NB: same as age */
120         ic->ic_node_getrssi = node_getrssi;
121         ic->ic_node_getsignal = node_getsignal;
122         ic->ic_node_getmimoinfo = node_getmimoinfo;
123
124         /*
125          * Set flags to be propagated to all vap's;
126          * these define default behaviour/configuration.
127          */
128         ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */
129 }
130
131 void
132 ieee80211_node_detach(struct ieee80211com *ic)
133 {
134
135         callout_drain(&ic->ic_inact);
136         ieee80211_node_table_cleanup(&ic->ic_sta);
137         ieee80211_ageq_cleanup(&ic->ic_stageq);
138 }
139
140 void
141 ieee80211_node_vattach(struct ieee80211vap *vap)
142 {
143         /* NB: driver can override */
144         vap->iv_max_aid = IEEE80211_AID_DEF;
145
146         /* default station inactivity timer setings */
147         vap->iv_inact_init = IEEE80211_INACT_INIT;
148         vap->iv_inact_auth = IEEE80211_INACT_AUTH;
149         vap->iv_inact_run = IEEE80211_INACT_RUN;
150         vap->iv_inact_probe = IEEE80211_INACT_PROBE;
151
152         IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT,
153             "%s: init %u auth %u run %u probe %u\n", __func__,
154             vap->iv_inact_init, vap->iv_inact_auth,
155             vap->iv_inact_run, vap->iv_inact_probe);
156 }
157
158 void
159 ieee80211_node_latevattach(struct ieee80211vap *vap)
160 {
161         if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
162                 /* XXX should we allow max aid to be zero? */
163                 if (vap->iv_max_aid < IEEE80211_AID_MIN) {
164                         vap->iv_max_aid = IEEE80211_AID_MIN;
165                         if_printf(vap->iv_ifp,
166                             "WARNING: max aid too small, changed to %d\n",
167                             vap->iv_max_aid);
168                 }
169                 vap->iv_aid_bitmap = (uint32_t *) IEEE80211_MALLOC(
170                         howmany(vap->iv_max_aid, 32) * sizeof(uint32_t),
171                         M_80211_NODE,
172                         IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
173                 if (vap->iv_aid_bitmap == NULL) {
174                         /* XXX no way to recover */
175                         printf("%s: no memory for AID bitmap, max aid %d!\n",
176                             __func__, vap->iv_max_aid);
177                         vap->iv_max_aid = 0;
178                 }
179         }
180
181         ieee80211_reset_bss(vap);
182
183         vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode);
184 }
185
186 void
187 ieee80211_node_vdetach(struct ieee80211vap *vap)
188 {
189         struct ieee80211com *ic = vap->iv_ic;
190
191         ieee80211_node_table_reset(&ic->ic_sta, vap);
192         if (vap->iv_bss != NULL) {
193                 ieee80211_free_node(vap->iv_bss);
194                 vap->iv_bss = NULL;
195         }
196         if (vap->iv_aid_bitmap != NULL) {
197                 IEEE80211_FREE(vap->iv_aid_bitmap, M_80211_NODE);
198                 vap->iv_aid_bitmap = NULL;
199         }
200 }
201
202 /* 
203  * Port authorize/unauthorize interfaces for use by an authenticator.
204  */
205
206 void
207 ieee80211_node_authorize(struct ieee80211_node *ni)
208 {
209         struct ieee80211vap *vap = ni->ni_vap;
210
211         ni->ni_flags |= IEEE80211_NODE_AUTH;
212         ni->ni_inact_reload = vap->iv_inact_run;
213         ni->ni_inact = ni->ni_inact_reload;
214
215         IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
216             "%s: inact_reload %u", __func__, ni->ni_inact_reload);
217 }
218
219 void
220 ieee80211_node_unauthorize(struct ieee80211_node *ni)
221 {
222         struct ieee80211vap *vap = ni->ni_vap;
223
224         ni->ni_flags &= ~IEEE80211_NODE_AUTH;
225         ni->ni_inact_reload = vap->iv_inact_auth;
226         if (ni->ni_inact > ni->ni_inact_reload)
227                 ni->ni_inact = ni->ni_inact_reload;
228
229         IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
230             "%s: inact_reload %u inact %u", __func__,
231             ni->ni_inact_reload, ni->ni_inact);
232 }
233
234 /*
235  * Fix tx parameters for a node according to ``association state''.
236  */
237 void
238 ieee80211_node_setuptxparms(struct ieee80211_node *ni)
239 {
240         struct ieee80211vap *vap = ni->ni_vap;
241         enum ieee80211_phymode mode;
242
243         if (ni->ni_flags & IEEE80211_NODE_HT) {
244                 if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan))
245                         mode = IEEE80211_MODE_11NA;
246                 else
247                         mode = IEEE80211_MODE_11NG;
248         } else {                                /* legacy rate handling */
249                 if (IEEE80211_IS_CHAN_ST(ni->ni_chan))
250                         mode = IEEE80211_MODE_STURBO_A;
251                 else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan))
252                         mode = IEEE80211_MODE_HALF;
253                 else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan))
254                         mode = IEEE80211_MODE_QUARTER;
255                 /* NB: 108A should be handled as 11a */
256                 else if (IEEE80211_IS_CHAN_A(ni->ni_chan))
257                         mode = IEEE80211_MODE_11A;
258                 else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) ||
259                     (ni->ni_flags & IEEE80211_NODE_ERP))
260                         mode = IEEE80211_MODE_11G;
261                 else
262                         mode = IEEE80211_MODE_11B;
263         }
264         ni->ni_txparms = &vap->iv_txparms[mode];
265 }
266
267 /*
268  * Set/change the channel.  The rate set is also updated as
269  * to insure a consistent view by drivers.
270  * XXX should be private but hostap needs it to deal with CSA
271  */
272 void
273 ieee80211_node_set_chan(struct ieee80211_node *ni,
274         struct ieee80211_channel *chan)
275 {
276         struct ieee80211com *ic = ni->ni_ic;
277         struct ieee80211vap *vap = ni->ni_vap;
278         enum ieee80211_phymode mode;
279
280         KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel"));
281
282         ni->ni_chan = chan;
283         mode = ieee80211_chan2mode(chan);
284         if (IEEE80211_IS_CHAN_HT(chan)) {
285                 /*
286                  * We must install the legacy rate est in ni_rates and the
287                  * HT rate set in ni_htrates.
288                  */
289                 ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan);
290                 /*
291                  * Setup bss tx parameters based on operating mode.  We
292                  * use legacy rates when operating in a mixed HT+non-HT bss
293                  * and non-ERP rates in 11g for mixed ERP+non-ERP bss.
294                  */
295                 if (mode == IEEE80211_MODE_11NA &&
296                     (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
297                         mode = IEEE80211_MODE_11A;
298                 else if (mode == IEEE80211_MODE_11NG &&
299                     (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
300                         mode = IEEE80211_MODE_11G;
301                 if (mode == IEEE80211_MODE_11G &&
302                     (vap->iv_flags & IEEE80211_F_PUREG) == 0)
303                         mode = IEEE80211_MODE_11B;
304         }
305         ni->ni_txparms = &vap->iv_txparms[mode];
306         ni->ni_rates = *ieee80211_get_suprates(ic, chan);
307 }
308
309 static __inline void
310 copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss)
311 {
312         /* propagate useful state */
313         nbss->ni_authmode = obss->ni_authmode;
314         nbss->ni_txpower = obss->ni_txpower;
315         nbss->ni_vlan = obss->ni_vlan;
316         /* XXX statistics? */
317         /* XXX legacy WDS bssid? */
318 }
319
320 void
321 ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan)
322 {
323         struct ieee80211com *ic = vap->iv_ic;
324         struct ieee80211_node *ni;
325
326         IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
327                 "%s: creating %s on channel %u%c flags 0x%08x\n", __func__,
328                 ieee80211_opmode_name[vap->iv_opmode],
329                 ieee80211_chan2ieee(ic, chan),
330                 ieee80211_channel_type_char(chan),
331                 chan->ic_flags);
332
333         ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
334         if (ni == NULL) {
335                 /* XXX recovery? */
336                 return;
337         }
338         IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
339         ni->ni_esslen = vap->iv_des_ssid[0].len;
340         memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
341         if (vap->iv_bss != NULL)
342                 copy_bss(ni, vap->iv_bss);
343         ni->ni_intval = ic->ic_bintval;
344         if (vap->iv_flags & IEEE80211_F_PRIVACY)
345                 ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
346         if (ic->ic_phytype == IEEE80211_T_FH) {
347                 ni->ni_fhdwell = 200;   /* XXX */
348                 ni->ni_fhindex = 1;
349         }
350         if (vap->iv_opmode == IEEE80211_M_IBSS) {
351                 vap->iv_flags |= IEEE80211_F_SIBSS;
352                 ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS;       /* XXX */
353                 if (vap->iv_flags & IEEE80211_F_DESBSSID)
354                         IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
355                 else {
356                         get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN);
357                         /* clear group bit, add local bit */
358                         ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02;
359                 }
360         } else if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
361                 if (vap->iv_flags & IEEE80211_F_DESBSSID)
362                         IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
363                 else
364 #ifdef IEEE80211_SUPPORT_TDMA
365                 if ((vap->iv_caps & IEEE80211_C_TDMA) == 0)
366 #endif
367                         memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN);
368 #ifdef IEEE80211_SUPPORT_MESH
369         } else if (vap->iv_opmode == IEEE80211_M_MBSS) {
370                 ni->ni_meshidlen = vap->iv_mesh->ms_idlen;
371                 memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen);
372 #endif
373         }
374         /* 
375          * Fix the channel and related attributes.
376          */
377         /* clear DFS CAC state on previous channel */
378         if (ic->ic_bsschan != IEEE80211_CHAN_ANYC &&
379             ic->ic_bsschan->ic_freq != chan->ic_freq &&
380             IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan))
381                 ieee80211_dfs_cac_clear(ic, ic->ic_bsschan);
382         ic->ic_bsschan = chan;
383         ieee80211_node_set_chan(ni, chan);
384         ic->ic_curmode = ieee80211_chan2mode(chan);
385         /*
386          * Do mode-specific setup.
387          */
388         if (IEEE80211_IS_CHAN_FULL(chan)) {
389                 if (IEEE80211_IS_CHAN_ANYG(chan)) {
390                         /*
391                          * Use a mixed 11b/11g basic rate set.
392                          */
393                         ieee80211_setbasicrates(&ni->ni_rates,
394                             IEEE80211_MODE_11G);
395                         if (vap->iv_flags & IEEE80211_F_PUREG) {
396                                 /*
397                                  * Also mark OFDM rates basic so 11b
398                                  * stations do not join (WiFi compliance).
399                                  */
400                                 ieee80211_addbasicrates(&ni->ni_rates,
401                                     IEEE80211_MODE_11A);
402                         }
403                 } else if (IEEE80211_IS_CHAN_B(chan)) {
404                         /*
405                          * Force pure 11b rate set.
406                          */
407                         ieee80211_setbasicrates(&ni->ni_rates,
408                                 IEEE80211_MODE_11B);
409                 }
410         }
411
412         /* XXX TODO: other bits and pieces - eg fast-frames? */
413
414         /* If we're an 11n channel then initialise the 11n bits */
415         if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) {
416                 /* XXX what else? */
417                 ieee80211_ht_node_init(ni);
418         }
419
420         (void) ieee80211_sta_join1(ieee80211_ref_node(ni));
421 }
422
423 /*
424  * Reset bss state on transition to the INIT state.
425  * Clear any stations from the table (they have been
426  * deauth'd) and reset the bss node (clears key, rate
427  * etc. state).
428  */
429 void
430 ieee80211_reset_bss(struct ieee80211vap *vap)
431 {
432         struct ieee80211com *ic = vap->iv_ic;
433         struct ieee80211_node *ni, *obss;
434
435         ieee80211_node_table_reset(&ic->ic_sta, vap);
436         /* XXX multi-bss: wrong */
437         ieee80211_reset_erp(ic);
438
439         ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
440         KASSERT(ni != NULL, ("unable to setup initial BSS node"));
441         obss = vap->iv_bss;
442         vap->iv_bss = ieee80211_ref_node(ni);
443         if (obss != NULL) {
444                 copy_bss(ni, obss);
445                 ni->ni_intval = ic->ic_bintval;
446                 ieee80211_free_node(obss);
447         } else
448                 IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
449 }
450
451 static int
452 match_ssid(const struct ieee80211_node *ni,
453         int nssid, const struct ieee80211_scan_ssid ssids[])
454 {
455         int i;
456
457         for (i = 0; i < nssid; i++) {
458                 if (ni->ni_esslen == ssids[i].len &&
459                      memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0)
460                         return 1;
461         }
462         return 0;
463 }
464
465 /*
466  * Test a node for suitability/compatibility.
467  */
468 static int
469 check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni)
470 {
471         struct ieee80211com *ic = ni->ni_ic;
472         uint8_t rate;
473
474         if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
475                 return 0;
476         if (vap->iv_opmode == IEEE80211_M_IBSS) {
477                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
478                         return 0;
479         } else {
480                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
481                         return 0;
482         }
483         if (vap->iv_flags & IEEE80211_F_PRIVACY) {
484                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
485                         return 0;
486         } else {
487                 /* XXX does this mean privacy is supported or required? */
488                 if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
489                         return 0;
490         }
491         rate = ieee80211_fix_rate(ni, &ni->ni_rates,
492             IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
493         if (rate & IEEE80211_RATE_BASIC)
494                 return 0;
495         if (vap->iv_des_nssid != 0 &&
496             !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
497                 return 0;
498         if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
499             !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
500                 return 0;
501         return 1;
502 }
503
504 #ifdef IEEE80211_DEBUG
505 /*
506  * Display node suitability/compatibility.
507  */
508 static void
509 check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni)
510 {
511         struct ieee80211com *ic = ni->ni_ic;
512         uint8_t rate;
513         int fail;
514
515         fail = 0;
516         if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
517                 fail |= 0x01;
518         if (vap->iv_opmode == IEEE80211_M_IBSS) {
519                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
520                         fail |= 0x02;
521         } else {
522                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
523                         fail |= 0x02;
524         }
525         if (vap->iv_flags & IEEE80211_F_PRIVACY) {
526                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
527                         fail |= 0x04;
528         } else {
529                 /* XXX does this mean privacy is supported or required? */
530                 if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
531                         fail |= 0x04;
532         }
533         rate = ieee80211_fix_rate(ni, &ni->ni_rates,
534              IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
535         if (rate & IEEE80211_RATE_BASIC)
536                 fail |= 0x08;
537         if (vap->iv_des_nssid != 0 &&
538             !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
539                 fail |= 0x10;
540         if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
541             !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
542                 fail |= 0x20;
543
544         printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr));
545         printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' ');
546         printf(" %3d%c",
547             ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' ');
548         printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
549             fail & 0x08 ? '!' : ' ');
550         printf(" %4s%c",
551             (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
552             (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
553             "????",
554             fail & 0x02 ? '!' : ' ');
555         printf(" %3s%c ",
556             (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ?  "wep" : "no",
557             fail & 0x04 ? '!' : ' ');
558         ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
559         printf("%s\n", fail & 0x10 ? "!" : "");
560 }
561 #endif /* IEEE80211_DEBUG */
562  
563
564 int
565 ieee80211_ibss_merge_check(struct ieee80211_node *ni)
566 {
567         struct ieee80211vap *vap = ni->ni_vap;
568
569         if (ni == vap->iv_bss ||
570             IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
571                 /* unchanged, nothing to do */
572                 return 0;
573         }
574
575         if (!check_bss(vap, ni)) {
576                 /* capabilities mismatch */
577                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
578                     "%s: merge failed, capabilities mismatch\n", __func__);
579 #ifdef IEEE80211_DEBUG
580                 if (ieee80211_msg_assoc(vap))
581                         check_bss_debug(vap, ni);
582 #endif
583                 vap->iv_stats.is_ibss_capmismatch++;
584                 return 0;
585         }
586
587         return 1;
588 }
589
590 /*
591  * Check if the given node should populate the node table.
592  *
593  * We need to be in "see all beacons for all ssids" mode in order
594  * to do IBSS merges, however this means we will populate nodes for
595  * /all/ IBSS SSIDs, versus just the one we care about.
596  *
597  * So this check ensures the node can actually belong to our IBSS
598  * configuration.  For now it simply checks the SSID.
599  */
600 int
601 ieee80211_ibss_node_check_new(struct ieee80211_node *ni,
602     const struct ieee80211_scanparams *scan)
603 {
604         struct ieee80211vap *vap = ni->ni_vap;
605         int i;
606
607         /*
608          * If we have no SSID and no scan SSID, return OK.
609          */
610         if (vap->iv_des_nssid == 0 && scan->ssid == NULL)
611                 goto ok;
612
613         /*
614          * If we have one of (SSID, scan SSID) then return error.
615          */
616         if (!! (vap->iv_des_nssid == 0) != !! (scan->ssid == NULL))
617                 goto mismatch;
618
619         /*
620          * Double-check - we need scan SSID.
621          */
622         if (scan->ssid == NULL)
623                 goto mismatch;
624
625         /*
626          * Check if the scan SSID matches the SSID list for the VAP.
627          */
628         for (i = 0; i < vap->iv_des_nssid; i++) {
629
630                 /* Sanity length check */
631                 if (vap->iv_des_ssid[i].len != scan->ssid[1])
632                         continue;
633
634                 /* Note: SSID in the scan entry is the IE format */
635                 if (memcmp(vap->iv_des_ssid[i].ssid, scan->ssid + 2,
636                     vap->iv_des_ssid[i].len) == 0)
637                         goto ok;
638         }
639
640 mismatch:
641         return (0);
642 ok:
643         return (1);
644 }
645
646 /*
647  * Handle 802.11 ad hoc network merge.  The
648  * convention, set by the Wireless Ethernet Compatibility Alliance
649  * (WECA), is that an 802.11 station will change its BSSID to match
650  * the "oldest" 802.11 ad hoc network, on the same channel, that
651  * has the station's desired SSID.  The "oldest" 802.11 network
652  * sends beacons with the greatest TSF timestamp.
653  *
654  * The caller is assumed to validate TSF's before attempting a merge.
655  *
656  * Return !0 if the BSSID changed, 0 otherwise.
657  */
658 int
659 ieee80211_ibss_merge(struct ieee80211_node *ni)
660 {
661 #ifdef IEEE80211_DEBUG
662         struct ieee80211vap *vap = ni->ni_vap;
663         struct ieee80211com *ic = ni->ni_ic;
664 #endif
665
666         if (! ieee80211_ibss_merge_check(ni))
667                 return 0;
668
669         IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
670                 "%s: new bssid %s: %s preamble, %s slot time%s\n", __func__,
671                 ether_sprintf(ni->ni_bssid),
672                 ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long",
673                 ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long",
674                 ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : ""
675         );
676         return ieee80211_sta_join1(ieee80211_ref_node(ni));
677 }
678
679 /*
680  * Calculate HT channel promotion flags for all vaps.
681  * This assumes ni_chan have been setup for each vap.
682  */
683 static int
684 gethtadjustflags(struct ieee80211com *ic)
685 {
686         struct ieee80211vap *vap;
687         int flags;
688
689         flags = 0;
690         /* XXX locking */
691         TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
692                 if (vap->iv_state < IEEE80211_S_RUN)
693                         continue;
694                 switch (vap->iv_opmode) {
695                 case IEEE80211_M_WDS:
696                 case IEEE80211_M_STA:
697                 case IEEE80211_M_AHDEMO:
698                 case IEEE80211_M_HOSTAP:
699                 case IEEE80211_M_IBSS:
700                 case IEEE80211_M_MBSS:
701                         flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan);
702                         break;
703                 default:
704                         break;
705                 }
706         }
707         return flags;
708 }
709
710 /*
711  * Check if the current channel needs to change based on whether
712  * any vap's are using HT20/HT40.  This is used to sync the state
713  * of ic_curchan after a channel width change on a running vap.
714  */
715 void
716 ieee80211_sync_curchan(struct ieee80211com *ic)
717 {
718         struct ieee80211_channel *c;
719
720         c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic));
721         if (c != ic->ic_curchan) {
722                 ic->ic_curchan = c;
723                 ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
724                 ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
725                 IEEE80211_UNLOCK(ic);
726                 ic->ic_set_channel(ic);
727                 ieee80211_radiotap_chan_change(ic);
728                 IEEE80211_LOCK(ic);
729         }
730 }
731
732 /*
733  * Setup the current channel.  The request channel may be
734  * promoted if other vap's are operating with HT20/HT40.
735  */
736 void
737 ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
738 {
739         if (ic->ic_htcaps & IEEE80211_HTC_HT) {
740                 int flags = gethtadjustflags(ic);
741                 /*
742                  * Check for channel promotion required to support the
743                  * set of running vap's.  This assumes we are called
744                  * after ni_chan is setup for each vap.
745                  */
746                 /* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */
747                 if (flags > ieee80211_htchanflags(c))
748                         c = ieee80211_ht_adjust_channel(ic, c, flags);
749         }
750         ic->ic_bsschan = ic->ic_curchan = c;
751         ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
752         ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
753 }
754
755 /*
756  * Change the current channel.  The channel change is guaranteed to have
757  * happened before the next state change.
758  */
759 void
760 ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
761 {
762         ieee80211_setupcurchan(ic, c);
763         ieee80211_runtask(ic, &ic->ic_chan_task);
764 }
765
766 void
767 ieee80211_update_chw(struct ieee80211com *ic)
768 {
769
770         ieee80211_setupcurchan(ic, ic->ic_curchan);
771         ieee80211_runtask(ic, &ic->ic_chw_task);
772 }
773
774 /*
775  * Join the specified IBSS/BSS network.  The node is assumed to
776  * be passed in with a held reference.
777  */
778 static int
779 ieee80211_sta_join1(struct ieee80211_node *selbs)
780 {
781         struct ieee80211vap *vap = selbs->ni_vap;
782         struct ieee80211com *ic = selbs->ni_ic;
783         struct ieee80211_node *obss;
784         int canreassoc;
785
786         /*
787          * Committed to selbs, setup state.
788          */
789         obss = vap->iv_bss;
790         /*
791          * Check if old+new node have the same address in which
792          * case we can reassociate when operating in sta mode.
793          */
794         canreassoc = (obss != NULL &&
795                 vap->iv_state == IEEE80211_S_RUN &&
796                 IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr));
797         vap->iv_bss = selbs;            /* NB: caller assumed to bump refcnt */
798         if (obss != NULL) {
799                 struct ieee80211_node_table *nt = obss->ni_table;
800
801                 copy_bss(selbs, obss);
802                 ieee80211_node_decref(obss);    /* iv_bss reference */
803
804                 IEEE80211_NODE_LOCK(nt);
805                 node_reclaim(nt, obss);         /* station table reference */
806                 IEEE80211_NODE_UNLOCK(nt);
807
808                 obss = NULL;            /* NB: guard against later use */
809         }
810
811         /*
812          * Delete unusable rates; we've already checked
813          * that the negotiated rate set is acceptable.
814          */
815         ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates,
816                 IEEE80211_F_DODEL | IEEE80211_F_JOIN);
817
818         ieee80211_setcurchan(ic, selbs->ni_chan);
819         /*
820          * Set the erp state (mostly the slot time) to deal with
821          * the auto-select case; this should be redundant if the
822          * mode is locked.
823          */ 
824         ieee80211_reset_erp(ic);
825         ieee80211_wme_initparams(vap);
826
827         if (vap->iv_opmode == IEEE80211_M_STA) {
828                 if (canreassoc) {
829                         /* Reassociate */
830                         ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1);
831                 } else {
832                         /*
833                          * Act as if we received a DEAUTH frame in case we
834                          * are invoked from the RUN state.  This will cause
835                          * us to try to re-authenticate if we are operating
836                          * as a station.
837                          */
838                         ieee80211_new_state(vap, IEEE80211_S_AUTH,
839                                 IEEE80211_FC0_SUBTYPE_DEAUTH);
840                 }
841         } else
842                 ieee80211_new_state(vap, IEEE80211_S_RUN, -1);
843         return 1;
844 }
845
846 int
847 ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan,
848         const struct ieee80211_scan_entry *se)
849 {
850         struct ieee80211com *ic = vap->iv_ic;
851         struct ieee80211_node *ni;
852
853         ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr);
854         if (ni == NULL) {
855                 /* XXX msg */
856                 return 0;
857         }
858
859         /*
860          * Expand scan state into node's format.
861          * XXX may not need all this stuff
862          */
863         IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid);
864         ni->ni_esslen = se->se_ssid[1];
865         memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen);
866         ni->ni_tstamp.tsf = se->se_tstamp.tsf;
867         ni->ni_intval = se->se_intval;
868         ni->ni_capinfo = se->se_capinfo;
869         ni->ni_chan = chan;
870         ni->ni_timoff = se->se_timoff;
871         ni->ni_fhdwell = se->se_fhdwell;
872         ni->ni_fhindex = se->se_fhindex;
873         ni->ni_erp = se->se_erp;
874         IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi);
875         ni->ni_noise = se->se_noise;
876         if (vap->iv_opmode == IEEE80211_M_STA) {
877                 /* NB: only infrastructure mode requires an associd */
878                 ni->ni_flags |= IEEE80211_NODE_ASSOCID;
879         }
880
881         if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) {
882                 ieee80211_ies_expand(&ni->ni_ies);
883 #ifdef IEEE80211_SUPPORT_SUPERG
884                 if (ni->ni_ies.ath_ie != NULL)
885                         ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
886 #endif
887                 if (ni->ni_ies.htcap_ie != NULL)
888                         ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
889                 if (ni->ni_ies.htinfo_ie != NULL)
890                         ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
891 #ifdef IEEE80211_SUPPORT_MESH
892                 if (ni->ni_ies.meshid_ie != NULL)
893                         ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie);
894 #endif
895 #ifdef IEEE80211_SUPPORT_TDMA
896                 if (ni->ni_ies.tdma_ie != NULL)
897                         ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie);
898 #endif
899
900                 /* XXX parse VHT IEs */
901                 /* XXX parse BSSLOAD IE */
902                 /* XXX parse APCHANREP IE */
903         }
904
905         vap->iv_dtim_period = se->se_dtimperiod;
906         vap->iv_dtim_count = 0;
907
908         /* NB: must be after ni_chan is setup */
909         ieee80211_setup_rates(ni, se->se_rates, se->se_xrates,
910                 IEEE80211_F_DOSORT);
911         if (ieee80211_iserp_rateset(&ni->ni_rates))
912                 ni->ni_flags |= IEEE80211_NODE_ERP;
913
914         /*
915          * Setup HT state for this node if it's available, otherwise
916          * non-STA modes won't pick this state up.
917          *
918          * For IBSS and related modes that don't go through an
919          * association request/response, the only appropriate place
920          * to setup the HT state is here.
921          */
922         if (ni->ni_ies.htinfo_ie != NULL &&
923             ni->ni_ies.htcap_ie != NULL &&
924             vap->iv_flags_ht & IEEE80211_FHT_HT) {
925                 ieee80211_ht_node_init(ni);
926                 ieee80211_ht_updateparams(ni,
927                     ni->ni_ies.htcap_ie,
928                     ni->ni_ies.htinfo_ie);
929                 ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie,
930                     IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
931                 ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie);
932         }
933         /* XXX else check for ath FF? */
934         /* XXX QoS? Difficult given that WME config is specific to a master */
935
936         ieee80211_node_setuptxparms(ni);
937         ieee80211_ratectl_node_init(ni);
938
939         return ieee80211_sta_join1(ieee80211_ref_node(ni));
940 }
941
942 /*
943  * Leave the specified IBSS/BSS network.  The node is assumed to
944  * be passed in with a held reference.
945  */
946 void
947 ieee80211_sta_leave(struct ieee80211_node *ni)
948 {
949         struct ieee80211com *ic = ni->ni_ic;
950
951         ic->ic_node_cleanup(ni);
952         ieee80211_notify_node_leave(ni);
953 }
954
955 /*
956  * Send a deauthenticate frame and drop the station.
957  */
958 void
959 ieee80211_node_deauth(struct ieee80211_node *ni, int reason)
960 {
961         /* NB: bump the refcnt to be sure temporary nodes are not reclaimed */
962         ieee80211_ref_node(ni);
963         if (ni->ni_associd != 0)
964                 IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason);
965         ieee80211_node_leave(ni);
966         ieee80211_free_node(ni);
967 }
968
969 static struct ieee80211_node *
970 node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
971 {
972         struct ieee80211_node *ni;
973
974         ni = (struct ieee80211_node *) IEEE80211_MALLOC(sizeof(struct ieee80211_node),
975                 M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
976         return ni;
977 }
978
979 /*
980  * Initialize an ie blob with the specified data.  If previous
981  * data exists re-use the data block.  As a side effect we clear
982  * all references to specific ie's; the caller is required to
983  * recalculate them.
984  */
985 int
986 ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len)
987 {
988         /* NB: assumes data+len are the last fields */
989         memset(ies, 0, offsetof(struct ieee80211_ies, data));
990         if (ies->data != NULL && ies->len != len) {
991                 /* data size changed */
992                 IEEE80211_FREE(ies->data, M_80211_NODE_IE);
993                 ies->data = NULL;
994         }
995         if (ies->data == NULL) {
996                 ies->data = (uint8_t *) IEEE80211_MALLOC(len, M_80211_NODE_IE,
997                     IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
998                 if (ies->data == NULL) {
999                         ies->len = 0;
1000                         /* NB: pointers have already been zero'd above */
1001                         return 0;
1002                 }
1003         }
1004         memcpy(ies->data, data, len);
1005         ies->len = len;
1006         return 1;
1007 }
1008
1009 /*
1010  * Reclaim storage for an ie blob.
1011  */
1012 void
1013 ieee80211_ies_cleanup(struct ieee80211_ies *ies)
1014 {
1015         if (ies->data != NULL)
1016                 IEEE80211_FREE(ies->data, M_80211_NODE_IE);
1017 }
1018
1019 /*
1020  * Expand an ie blob data contents and to fillin individual
1021  * ie pointers.  The data blob is assumed to be well-formed;
1022  * we don't do any validity checking of ie lengths.
1023  */
1024 void
1025 ieee80211_ies_expand(struct ieee80211_ies *ies)
1026 {
1027         uint8_t *ie;
1028         int ielen;
1029
1030         ie = ies->data;
1031         ielen = ies->len;
1032         while (ielen > 0) {
1033                 switch (ie[0]) {
1034                 case IEEE80211_ELEMID_VENDOR:
1035                         if (iswpaoui(ie))
1036                                 ies->wpa_ie = ie;
1037                         else if (iswmeoui(ie))
1038                                 ies->wme_ie = ie;
1039 #ifdef IEEE80211_SUPPORT_SUPERG
1040                         else if (isatherosoui(ie))
1041                                 ies->ath_ie = ie;
1042 #endif
1043 #ifdef IEEE80211_SUPPORT_TDMA
1044                         else if (istdmaoui(ie))
1045                                 ies->tdma_ie = ie;
1046 #endif
1047                         break;
1048                 case IEEE80211_ELEMID_RSN:
1049                         ies->rsn_ie = ie;
1050                         break;
1051                 case IEEE80211_ELEMID_HTCAP:
1052                         ies->htcap_ie = ie;
1053                         break;
1054                 case IEEE80211_ELEMID_HTINFO:
1055                         ies->htinfo_ie = ie;
1056                         break;
1057 #ifdef IEEE80211_SUPPORT_MESH
1058                 case IEEE80211_ELEMID_MESHID:
1059                         ies->meshid_ie = ie;
1060                         break;
1061 #endif
1062                 case IEEE80211_ELEMID_VHT_CAP:
1063                         ies->vhtcap_ie = ie;
1064                         break;
1065                 case IEEE80211_ELEMID_VHT_OPMODE:
1066                         ies->vhtopmode_ie = ie;
1067                         break;
1068                 case IEEE80211_ELEMID_VHT_PWR_ENV:
1069                         ies->vhtpwrenv_ie = ie;
1070                         break;
1071                 case IEEE80211_ELEMID_BSSLOAD:
1072                         ies->bssload_ie = ie;
1073                         break;
1074                 case IEEE80211_ELEMID_APCHANREP:
1075                         ies->apchanrep_ie = ie;
1076                         break;
1077                 }
1078                 ielen -= 2 + ie[1];
1079                 ie += 2 + ie[1];
1080         }
1081 }
1082
1083 /*
1084  * Reclaim any resources in a node and reset any critical
1085  * state.  Typically nodes are free'd immediately after,
1086  * but in some cases the storage may be reused so we need
1087  * to insure consistent state (should probably fix that).
1088  */
1089 static void
1090 node_cleanup(struct ieee80211_node *ni)
1091 {
1092         struct ieee80211vap *vap = ni->ni_vap;
1093         struct ieee80211com *ic = ni->ni_ic;
1094         int i;
1095
1096         /* NB: preserve ni_table */
1097         if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) {
1098                 if (vap->iv_opmode != IEEE80211_M_STA)
1099                         vap->iv_ps_sta--;
1100                 ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT;
1101                 IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni,
1102                     "power save mode off, %u sta's in ps mode", vap->iv_ps_sta);
1103         }
1104         /*
1105          * Cleanup any HT-related state.
1106          */
1107         if (ni->ni_flags & IEEE80211_NODE_HT)
1108                 ieee80211_ht_node_cleanup(ni);
1109 #ifdef IEEE80211_SUPPORT_SUPERG
1110         /* Always do FF node cleanup; for A-MSDU */
1111         ieee80211_ff_node_cleanup(ni);
1112 #endif
1113 #ifdef IEEE80211_SUPPORT_MESH
1114         /*
1115          * Cleanup any mesh-related state.
1116          */
1117         if (vap->iv_opmode == IEEE80211_M_MBSS)
1118                 ieee80211_mesh_node_cleanup(ni);
1119 #endif
1120         /*
1121          * Clear any staging queue entries.
1122          */
1123         ieee80211_ageq_drain_node(&ic->ic_stageq, ni);
1124
1125         /*
1126          * Clear AREF flag that marks the authorization refcnt bump
1127          * has happened.  This is probably not needed as the node
1128          * should always be removed from the table so not found but
1129          * do it just in case.
1130          * Likewise clear the ASSOCID flag as these flags are intended
1131          * to be managed in tandem.
1132          */
1133         ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID);
1134
1135         /*
1136          * Drain power save queue and, if needed, clear TIM.
1137          */
1138         if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL)
1139                 vap->iv_set_tim(ni, 0);
1140
1141         ni->ni_associd = 0;
1142         if (ni->ni_challenge != NULL) {
1143                 IEEE80211_FREE(ni->ni_challenge, M_80211_NODE);
1144                 ni->ni_challenge = NULL;
1145         }
1146         /*
1147          * Preserve SSID, WPA, and WME ie's so the bss node is
1148          * reusable during a re-auth/re-assoc state transition.
1149          * If we remove these data they will not be recreated
1150          * because they come from a probe-response or beacon frame
1151          * which cannot be expected prior to the association-response.
1152          * This should not be an issue when operating in other modes
1153          * as stations leaving always go through a full state transition
1154          * which will rebuild this state.
1155          *
1156          * XXX does this leave us open to inheriting old state?
1157          */
1158         for (i = 0; i < nitems(ni->ni_rxfrag); i++)
1159                 if (ni->ni_rxfrag[i] != NULL) {
1160                         m_freem(ni->ni_rxfrag[i]);
1161                         ni->ni_rxfrag[i] = NULL;
1162                 }
1163         /*
1164          * Must be careful here to remove any key map entry w/o a LOR.
1165          */
1166         ieee80211_node_delucastkey(ni);
1167 }
1168
1169 static void
1170 node_free(struct ieee80211_node *ni)
1171 {
1172         struct ieee80211com *ic = ni->ni_ic;
1173
1174         ieee80211_ratectl_node_deinit(ni);
1175         ic->ic_node_cleanup(ni);
1176         ieee80211_ies_cleanup(&ni->ni_ies);
1177         ieee80211_psq_cleanup(&ni->ni_psq);
1178         IEEE80211_FREE(ni, M_80211_NODE);
1179 }
1180
1181 static void
1182 node_age(struct ieee80211_node *ni)
1183 {
1184         struct ieee80211vap *vap = ni->ni_vap;
1185
1186         /*
1187          * Age frames on the power save queue.
1188          */
1189         if (ieee80211_node_psq_age(ni) != 0 &&
1190             ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL)
1191                 vap->iv_set_tim(ni, 0);
1192         /*
1193          * Age out HT resources (e.g. frames on the
1194          * A-MPDU reorder queues).
1195          */
1196         if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT))
1197                 ieee80211_ht_node_age(ni);
1198 }
1199
1200 static int8_t
1201 node_getrssi(const struct ieee80211_node *ni)
1202 {
1203         uint32_t avgrssi = ni->ni_avgrssi;
1204         int32_t rssi;
1205
1206         if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER)
1207                 return 0;
1208         rssi = IEEE80211_RSSI_GET(avgrssi);
1209         return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
1210 }
1211
1212 static void
1213 node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise)
1214 {
1215         *rssi = node_getrssi(ni);
1216         *noise = ni->ni_noise;
1217 }
1218
1219 static void
1220 node_getmimoinfo(const struct ieee80211_node *ni,
1221         struct ieee80211_mimo_info *info)
1222 {
1223         int i;
1224         uint32_t avgrssi;
1225         int32_t rssi;
1226
1227         bzero(info, sizeof(*info));
1228
1229         for (i = 0; i < ni->ni_mimo_chains; i++) {
1230                 avgrssi = ni->ni_mimo_rssi_ctl[i];
1231                 if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) {
1232                         info->rssi[i] = 0;
1233                 } else {
1234                         rssi = IEEE80211_RSSI_GET(avgrssi);
1235                         info->rssi[i] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
1236                 }
1237                 info->noise[i] = ni->ni_mimo_noise_ctl[i];
1238         }
1239
1240         /* XXX ext radios? */
1241
1242         /* XXX EVM? */
1243 }
1244
1245 static void
1246 ieee80211_add_node_nt(struct ieee80211_node_table *nt,
1247     struct ieee80211_node *ni)
1248 {
1249         struct ieee80211com *ic = nt->nt_ic;
1250         int hash;
1251
1252         IEEE80211_NODE_LOCK_ASSERT(nt);
1253
1254         hash = IEEE80211_NODE_HASH(ic, ni->ni_macaddr);
1255         (void) ic;      /* XXX IEEE80211_NODE_HASH */
1256         TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list);
1257         LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash);
1258         nt->nt_count++;
1259         ni->ni_table = nt;
1260 }
1261
1262 static void
1263 ieee80211_del_node_nt(struct ieee80211_node_table *nt,
1264     struct ieee80211_node *ni)
1265 {
1266
1267         IEEE80211_NODE_LOCK_ASSERT(nt);
1268
1269         TAILQ_REMOVE(&nt->nt_node, ni, ni_list);
1270         LIST_REMOVE(ni, ni_hash);
1271         nt->nt_count--;
1272         KASSERT(nt->nt_count >= 0,
1273             ("nt_count is negative (%d)!\n", nt->nt_count));
1274         ni->ni_table = NULL;
1275 }
1276
1277 struct ieee80211_node *
1278 ieee80211_alloc_node(struct ieee80211_node_table *nt,
1279         struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
1280 {
1281         struct ieee80211com *ic = nt->nt_ic;
1282         struct ieee80211_node *ni;
1283
1284         ni = ic->ic_node_alloc(vap, macaddr);
1285         if (ni == NULL) {
1286                 vap->iv_stats.is_rx_nodealloc++;
1287                 return NULL;
1288         }
1289
1290         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
1291                 "%s %p<%s> in %s table\n", __func__, ni,
1292                 ether_sprintf(macaddr), nt->nt_name);
1293
1294         IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
1295         ieee80211_node_initref(ni);             /* mark referenced */
1296         ni->ni_chan = IEEE80211_CHAN_ANYC;
1297         ni->ni_authmode = IEEE80211_AUTH_OPEN;
1298         ni->ni_txpower = ic->ic_txpowlimit;     /* max power */
1299         ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
1300         ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE);
1301         ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER;
1302         ni->ni_inact_reload = nt->nt_inact_init;
1303         ni->ni_inact = ni->ni_inact_reload;
1304         ni->ni_ath_defkeyix = 0x7fff;
1305         ieee80211_psq_init(&ni->ni_psq, "unknown");
1306 #ifdef IEEE80211_SUPPORT_MESH
1307         if (vap->iv_opmode == IEEE80211_M_MBSS)
1308                 ieee80211_mesh_node_init(vap, ni);
1309 #endif
1310         IEEE80211_NODE_LOCK(nt);
1311         ieee80211_add_node_nt(nt, ni);
1312         ni->ni_vap = vap;
1313         ni->ni_ic = ic;
1314         IEEE80211_NODE_UNLOCK(nt);
1315
1316         IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
1317             "%s: inact_reload %u", __func__, ni->ni_inact_reload);
1318
1319         ieee80211_ratectl_node_init(ni);
1320
1321         return ni;
1322 }
1323
1324 /*
1325  * Craft a temporary node suitable for sending a management frame
1326  * to the specified station.  We craft only as much state as we
1327  * need to do the work since the node will be immediately reclaimed
1328  * once the send completes.
1329  */
1330 struct ieee80211_node *
1331 ieee80211_tmp_node(struct ieee80211vap *vap,
1332         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1333 {
1334         struct ieee80211com *ic = vap->iv_ic;
1335         struct ieee80211_node *ni;
1336
1337         ni = ic->ic_node_alloc(vap, macaddr);
1338         if (ni != NULL) {
1339                 struct ieee80211_node *bss = vap->iv_bss;
1340
1341                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
1342                         "%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr));
1343
1344                 ni->ni_table = NULL;            /* NB: pedantic */
1345                 ni->ni_ic = ic;                 /* NB: needed to set channel */
1346                 ni->ni_vap = vap;
1347
1348                 IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
1349                 IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
1350                 ieee80211_node_initref(ni);             /* mark referenced */
1351                 /* NB: required by ieee80211_fix_rate */
1352                 ieee80211_node_set_chan(ni, bss->ni_chan);
1353                 ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey,
1354                         IEEE80211_KEYIX_NONE);
1355                 ni->ni_txpower = bss->ni_txpower;
1356                 /* XXX optimize away */
1357                 ieee80211_psq_init(&ni->ni_psq, "unknown");
1358
1359                 ieee80211_ratectl_node_init(ni);
1360         } else {
1361                 /* XXX msg */
1362                 vap->iv_stats.is_rx_nodealloc++;
1363         }
1364         return ni;
1365 }
1366
1367 struct ieee80211_node *
1368 ieee80211_dup_bss(struct ieee80211vap *vap,
1369         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1370 {
1371         struct ieee80211com *ic = vap->iv_ic;
1372         struct ieee80211_node *ni;
1373
1374         ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr);
1375         if (ni != NULL) {
1376                 struct ieee80211_node *bss = vap->iv_bss;
1377                 /*
1378                  * Inherit from iv_bss.
1379                  */
1380                 copy_bss(ni, bss);
1381                 IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
1382                 ieee80211_node_set_chan(ni, bss->ni_chan);
1383         }
1384         return ni;
1385 }
1386
1387 /*
1388  * Create a bss node for a legacy WDS vap.  The far end does
1389  * not associate so we just create create a new node and
1390  * simulate an association.  The caller is responsible for
1391  * installing the node as the bss node and handling any further
1392  * setup work like authorizing the port.
1393  */
1394 struct ieee80211_node *
1395 ieee80211_node_create_wds(struct ieee80211vap *vap,
1396         const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan)
1397 {
1398         struct ieee80211com *ic = vap->iv_ic;
1399         struct ieee80211_node *ni;
1400
1401         /* XXX check if node already in sta table? */
1402         ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid);
1403         if (ni != NULL) {
1404                 ni->ni_wdsvap = vap;
1405                 IEEE80211_ADDR_COPY(ni->ni_bssid, bssid);
1406                 /*
1407                  * Inherit any manually configured settings.
1408                  */
1409                 copy_bss(ni, vap->iv_bss);
1410                 ieee80211_node_set_chan(ni, chan);
1411                 /* NB: propagate ssid so available to WPA supplicant */
1412                 ni->ni_esslen = vap->iv_des_ssid[0].len;
1413                 memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
1414                 /* NB: no associd for peer */
1415                 /*
1416                  * There are no management frames to use to
1417                  * discover neighbor capabilities, so blindly
1418                  * propagate the local configuration.
1419                  */
1420                 if (vap->iv_flags & IEEE80211_F_WME)
1421                         ni->ni_flags |= IEEE80211_NODE_QOS;
1422 #ifdef IEEE80211_SUPPORT_SUPERG
1423                 if (vap->iv_flags & IEEE80211_F_FF)
1424                         ni->ni_flags |= IEEE80211_NODE_FF;
1425 #endif
1426                 if ((ic->ic_htcaps & IEEE80211_HTC_HT) &&
1427                     (vap->iv_flags_ht & IEEE80211_FHT_HT)) {
1428                         /*
1429                          * Device is HT-capable and HT is enabled for
1430                          * the vap; setup HT operation.  On return
1431                          * ni_chan will be adjusted to an HT channel.
1432                          */
1433                         ieee80211_ht_wds_init(ni);
1434                 } else {
1435                         struct ieee80211_channel *c = ni->ni_chan;
1436                         /*
1437                          * Force a legacy channel to be used.
1438                          */
1439                         c = ieee80211_find_channel(ic,
1440                             c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT);
1441                         KASSERT(c != NULL, ("no legacy channel, %u/%x",
1442                             ni->ni_chan->ic_freq, ni->ni_chan->ic_flags));
1443                         ni->ni_chan = c;
1444                 }
1445         }
1446         return ni;
1447 }
1448
1449 struct ieee80211_node *
1450 #ifdef IEEE80211_DEBUG_REFCNT
1451 ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt,
1452         const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
1453 #else
1454 ieee80211_find_node_locked(struct ieee80211_node_table *nt,
1455         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1456 #endif
1457 {
1458         struct ieee80211_node *ni;
1459         int hash;
1460
1461         IEEE80211_NODE_LOCK_ASSERT(nt);
1462
1463         hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
1464         LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
1465                 if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
1466                         ieee80211_ref_node(ni); /* mark referenced */
1467 #ifdef IEEE80211_DEBUG_REFCNT
1468                         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
1469                             "%s (%s:%u) %p<%s> refcnt %d\n", __func__,
1470                             func, line,
1471                             ni, ether_sprintf(ni->ni_macaddr),
1472                             ieee80211_node_refcnt(ni));
1473 #endif
1474                         return ni;
1475                 }
1476         }
1477         return NULL;
1478 }
1479
1480 struct ieee80211_node *
1481 #ifdef IEEE80211_DEBUG_REFCNT
1482 ieee80211_find_node_debug(struct ieee80211_node_table *nt,
1483         const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
1484 #else
1485 ieee80211_find_node(struct ieee80211_node_table *nt,
1486         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1487 #endif
1488 {
1489         struct ieee80211_node *ni;
1490
1491         IEEE80211_NODE_LOCK(nt);
1492         ni = ieee80211_find_node_locked(nt, macaddr);
1493         IEEE80211_NODE_UNLOCK(nt);
1494         return ni;
1495 }
1496
1497 struct ieee80211_node *
1498 #ifdef IEEE80211_DEBUG_REFCNT
1499 ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt,
1500         const struct ieee80211vap *vap,
1501         const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
1502 #else
1503 ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt,
1504         const struct ieee80211vap *vap,
1505         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1506 #endif
1507 {
1508         struct ieee80211_node *ni;
1509         int hash;
1510
1511         IEEE80211_NODE_LOCK_ASSERT(nt);
1512
1513         hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
1514         LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
1515                 if (ni->ni_vap == vap &&
1516                     IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
1517                         ieee80211_ref_node(ni); /* mark referenced */
1518 #ifdef IEEE80211_DEBUG_REFCNT
1519                         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
1520                             "%s (%s:%u) %p<%s> refcnt %d\n", __func__,
1521                             func, line,
1522                             ni, ether_sprintf(ni->ni_macaddr),
1523                             ieee80211_node_refcnt(ni));
1524 #endif
1525                         return ni;
1526                 }
1527         }
1528         return NULL;
1529 }
1530
1531 struct ieee80211_node *
1532 #ifdef IEEE80211_DEBUG_REFCNT
1533 ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt,
1534         const struct ieee80211vap *vap,
1535         const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
1536 #else
1537 ieee80211_find_vap_node(struct ieee80211_node_table *nt,
1538         const struct ieee80211vap *vap,
1539         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1540 #endif
1541 {
1542         struct ieee80211_node *ni;
1543
1544         IEEE80211_NODE_LOCK(nt);
1545         ni = ieee80211_find_vap_node_locked(nt, vap, macaddr);
1546         IEEE80211_NODE_UNLOCK(nt);
1547         return ni;
1548 }
1549
1550 /*
1551  * Fake up a node; this handles node discovery in adhoc mode.
1552  * Note that for the driver's benefit we we treat this like
1553  * an association so the driver has an opportunity to setup
1554  * it's private state.
1555  */
1556 struct ieee80211_node *
1557 ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap,
1558         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1559 {
1560         struct ieee80211_node *ni;
1561
1562         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC,
1563             "%s: mac<%s>\n", __func__, ether_sprintf(macaddr));
1564         ni = ieee80211_dup_bss(vap, macaddr);
1565         if (ni != NULL) {
1566                 struct ieee80211com *ic = vap->iv_ic;
1567
1568                 /* XXX no rate negotiation; just dup */
1569                 ni->ni_rates = vap->iv_bss->ni_rates;
1570                 if (ieee80211_iserp_rateset(&ni->ni_rates))
1571                         ni->ni_flags |= IEEE80211_NODE_ERP;
1572                 if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
1573                         /*
1574                          * In adhoc demo mode there are no management
1575                          * frames to use to discover neighbor capabilities,
1576                          * so blindly propagate the local configuration 
1577                          * so we can do interesting things (e.g. use
1578                          * WME to disable ACK's).
1579                          */
1580                         /*
1581                          * XXX TODO: 11n?
1582                          */
1583                         if (vap->iv_flags & IEEE80211_F_WME)
1584                                 ni->ni_flags |= IEEE80211_NODE_QOS;
1585 #ifdef IEEE80211_SUPPORT_SUPERG
1586                         if (vap->iv_flags & IEEE80211_F_FF)
1587                                 ni->ni_flags |= IEEE80211_NODE_FF;
1588 #endif
1589                 }
1590                 ieee80211_node_setuptxparms(ni);
1591                 ieee80211_ratectl_node_init(ni);
1592
1593                 /*
1594                  * XXX TODO: 11n? At least 20MHz, at least A-MPDU RX,
1595                  * not A-MPDU TX; not 11n rates, etc.  We'll cycle
1596                  * that after we hear that we can indeed do 11n
1597                  * (either by a beacon frame or by a probe response.)
1598                  */
1599
1600                 /*
1601                  * This is the first time we see the node.
1602                  */
1603                 if (ic->ic_newassoc != NULL)
1604                         ic->ic_newassoc(ni, 1);
1605
1606                 /*
1607                  * Kick off a probe request to the given node;
1608                  * we will then use the probe response to update
1609                  * 11n/etc configuration state.
1610                  *
1611                  * XXX TODO: this isn't guaranteed, and until we get
1612                  * a probe response, we won't be able to actually
1613                  * do anything 802.11n related to the node.
1614                  * So if this does indeed work, maybe we should hold
1615                  * off on sending responses until we get the probe
1616                  * response, or just default to some sensible subset
1617                  * of 802.11n behaviour (eg always allow aggregation
1618                  * negotiation TO us, but not FROM us, etc) so we
1619                  * aren't entirely busted.
1620                  */
1621                 if (vap->iv_opmode == IEEE80211_M_IBSS) {
1622                         ieee80211_send_probereq(ni, /* node */
1623                                 vap->iv_myaddr, /* SA */
1624                                 ni->ni_macaddr, /* DA */
1625                                 vap->iv_bss->ni_bssid, /* BSSID */
1626                                 vap->iv_bss->ni_essid,
1627                                 vap->iv_bss->ni_esslen); /* SSID */
1628                 }
1629
1630                 /* XXX not right for 802.1x/WPA */
1631                 ieee80211_node_authorize(ni);
1632         }
1633         return ni;
1634 }
1635
1636 void
1637 ieee80211_init_neighbor(struct ieee80211_node *ni,
1638         const struct ieee80211_frame *wh,
1639         const struct ieee80211_scanparams *sp)
1640 {
1641         int do_ht_setup = 0;
1642
1643         ni->ni_esslen = sp->ssid[1];
1644         memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]);
1645         IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3);
1646         memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp));
1647         ni->ni_intval = sp->bintval;
1648         ni->ni_capinfo = sp->capinfo;
1649         ni->ni_chan = ni->ni_ic->ic_curchan;
1650         ni->ni_fhdwell = sp->fhdwell;
1651         ni->ni_fhindex = sp->fhindex;
1652         ni->ni_erp = sp->erp;
1653         ni->ni_timoff = sp->timoff;
1654 #ifdef IEEE80211_SUPPORT_MESH
1655         if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS)
1656                 ieee80211_mesh_init_neighbor(ni, wh, sp);
1657 #endif
1658         if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) {
1659                 ieee80211_ies_expand(&ni->ni_ies);
1660                 if (ni->ni_ies.wme_ie != NULL)
1661                         ni->ni_flags |= IEEE80211_NODE_QOS;
1662                 else
1663                         ni->ni_flags &= ~IEEE80211_NODE_QOS;
1664 #ifdef IEEE80211_SUPPORT_SUPERG
1665                 if (ni->ni_ies.ath_ie != NULL)
1666                         ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
1667 #endif
1668                 if (ni->ni_ies.htcap_ie != NULL)
1669                         ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
1670                 if (ni->ni_ies.htinfo_ie != NULL)
1671                         ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
1672
1673                 if ((ni->ni_ies.htcap_ie != NULL) &&
1674                     (ni->ni_ies.htinfo_ie != NULL) &&
1675                     (ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) {
1676                         do_ht_setup = 1;
1677                 }
1678         }
1679
1680         /* NB: must be after ni_chan is setup */
1681         ieee80211_setup_rates(ni, sp->rates, sp->xrates,
1682                 IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE |
1683                 IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
1684
1685         /*
1686          * If the neighbor is HT compatible, flip that on.
1687          */
1688         if (do_ht_setup) {
1689                 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
1690                     "%s: doing HT setup\n", __func__);
1691                 ieee80211_ht_node_init(ni);
1692                 ieee80211_ht_updateparams(ni,
1693                     ni->ni_ies.htcap_ie,
1694                     ni->ni_ies.htinfo_ie);
1695                 ieee80211_setup_htrates(ni,
1696                     ni->ni_ies.htcap_ie,
1697                     IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
1698                 ieee80211_setup_basic_htrates(ni,
1699                     ni->ni_ies.htinfo_ie);
1700                 ieee80211_node_setuptxparms(ni);
1701                 ieee80211_ratectl_node_init(ni);
1702
1703                 /* Reassociate; we're now 11n */
1704                 /*
1705                  * XXX TODO: this is the wrong thing to do -
1706                  * we're calling it with isnew=1 so the ath(4)
1707                  * driver reinitialises the rate tables.
1708                  * This "mostly" works for ath(4), but it won't
1709                  * be right for firmware devices which allocate
1710                  * node states.
1711                  *
1712                  * So, do we just create a new node and delete
1713                  * the old one? Or?
1714                  */
1715                 if (ni->ni_ic->ic_newassoc)
1716                         ni->ni_ic->ic_newassoc(ni, 1);
1717         }
1718 }
1719
1720 /*
1721  * Do node discovery in adhoc mode on receipt of a beacon
1722  * or probe response frame.  Note that for the driver's
1723  * benefit we we treat this like an association so the
1724  * driver has an opportunity to setup it's private state.
1725  */
1726 struct ieee80211_node *
1727 ieee80211_add_neighbor(struct ieee80211vap *vap,
1728         const struct ieee80211_frame *wh,
1729         const struct ieee80211_scanparams *sp)
1730 {
1731         struct ieee80211_node *ni;
1732
1733         IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
1734             "%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2));
1735         ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */
1736         if (ni != NULL) {
1737                 struct ieee80211com *ic = vap->iv_ic;
1738
1739                 ieee80211_init_neighbor(ni, wh, sp);
1740                 if (ieee80211_iserp_rateset(&ni->ni_rates))
1741                         ni->ni_flags |= IEEE80211_NODE_ERP;
1742                 ieee80211_node_setuptxparms(ni);
1743                 ieee80211_ratectl_node_init(ni);
1744                 if (ic->ic_newassoc != NULL)
1745                         ic->ic_newassoc(ni, 1);
1746                 /* XXX not right for 802.1x/WPA */
1747                 ieee80211_node_authorize(ni);
1748         }
1749         return ni;
1750 }
1751
1752 #define IS_PROBEREQ(wh) \
1753         ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \
1754             == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ))
1755 #define IS_BCAST_PROBEREQ(wh) \
1756         (IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \
1757             ((const struct ieee80211_frame *)(wh))->i_addr3))
1758
1759 static __inline struct ieee80211_node *
1760 _find_rxnode(struct ieee80211_node_table *nt,
1761     const struct ieee80211_frame_min *wh)
1762 {
1763         if (IS_BCAST_PROBEREQ(wh))
1764                 return NULL;            /* spam bcast probe req to all vap's */
1765         return ieee80211_find_node_locked(nt, wh->i_addr2);
1766 }
1767
1768 /*
1769  * Locate the node for sender, track state, and then pass the
1770  * (referenced) node up to the 802.11 layer for its use.  Note
1771  * we can return NULL if the sender is not in the table.
1772  */
1773 struct ieee80211_node *
1774 #ifdef IEEE80211_DEBUG_REFCNT
1775 ieee80211_find_rxnode_debug(struct ieee80211com *ic,
1776         const struct ieee80211_frame_min *wh, const char *func, int line)
1777 #else
1778 ieee80211_find_rxnode(struct ieee80211com *ic,
1779         const struct ieee80211_frame_min *wh)
1780 #endif
1781 {
1782         struct ieee80211_node_table *nt;
1783         struct ieee80211_node *ni;
1784
1785         nt = &ic->ic_sta;
1786         IEEE80211_NODE_LOCK(nt);
1787         ni = _find_rxnode(nt, wh);
1788         IEEE80211_NODE_UNLOCK(nt);
1789
1790         return ni;
1791 }
1792
1793 /*
1794  * Like ieee80211_find_rxnode but use the supplied h/w
1795  * key index as a hint to locate the node in the key
1796  * mapping table.  If an entry is present at the key
1797  * index we return it; otherwise do a normal lookup and
1798  * update the mapping table if the station has a unicast
1799  * key assigned to it.
1800  */
1801 struct ieee80211_node *
1802 #ifdef IEEE80211_DEBUG_REFCNT
1803 ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic,
1804         const struct ieee80211_frame_min *wh, ieee80211_keyix keyix,
1805         const char *func, int line)
1806 #else
1807 ieee80211_find_rxnode_withkey(struct ieee80211com *ic,
1808         const struct ieee80211_frame_min *wh, ieee80211_keyix keyix)
1809 #endif
1810 {
1811         struct ieee80211_node_table *nt;
1812         struct ieee80211_node *ni;
1813
1814         nt = &ic->ic_sta;
1815         IEEE80211_NODE_LOCK(nt);
1816         if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax)
1817                 ni = nt->nt_keyixmap[keyix];
1818         else
1819                 ni = NULL;
1820         if (ni == NULL) {
1821                 ni = _find_rxnode(nt, wh);
1822                 if (ni != NULL && nt->nt_keyixmap != NULL) {
1823                         /*
1824                          * If the station has a unicast key cache slot
1825                          * assigned update the key->node mapping table.
1826                          */
1827                         keyix = ni->ni_ucastkey.wk_rxkeyix;
1828                         /* XXX can keyixmap[keyix] != NULL? */
1829                         if (keyix < nt->nt_keyixmax &&
1830                             nt->nt_keyixmap[keyix] == NULL) {
1831                                 IEEE80211_DPRINTF(ni->ni_vap,
1832                                     IEEE80211_MSG_NODE,
1833                                     "%s: add key map entry %p<%s> refcnt %d\n",
1834                                     __func__, ni, ether_sprintf(ni->ni_macaddr),
1835                                     ieee80211_node_refcnt(ni)+1);
1836                                 nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni);
1837                         }
1838                 }
1839         } else {
1840                 if (IS_BCAST_PROBEREQ(wh))
1841                         ni = NULL;      /* spam bcast probe req to all vap's */
1842                 else
1843                         ieee80211_ref_node(ni);
1844         }
1845         IEEE80211_NODE_UNLOCK(nt);
1846
1847         return ni;
1848 }
1849 #undef IS_BCAST_PROBEREQ
1850 #undef IS_PROBEREQ
1851
1852 /*
1853  * Return a reference to the appropriate node for sending
1854  * a data frame.  This handles node discovery in adhoc networks.
1855  */
1856 struct ieee80211_node *
1857 #ifdef IEEE80211_DEBUG_REFCNT
1858 ieee80211_find_txnode_debug(struct ieee80211vap *vap,
1859         const uint8_t macaddr[IEEE80211_ADDR_LEN],
1860         const char *func, int line)
1861 #else
1862 ieee80211_find_txnode(struct ieee80211vap *vap,
1863         const uint8_t macaddr[IEEE80211_ADDR_LEN])
1864 #endif
1865 {
1866         struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta;
1867         struct ieee80211_node *ni;
1868
1869         /*
1870          * The destination address should be in the node table
1871          * unless this is a multicast/broadcast frame.  We can
1872          * also optimize station mode operation, all frames go
1873          * to the bss node.
1874          */
1875         /* XXX can't hold lock across dup_bss 'cuz of recursive locking */
1876         IEEE80211_NODE_LOCK(nt);
1877         if (vap->iv_opmode == IEEE80211_M_STA ||
1878             vap->iv_opmode == IEEE80211_M_WDS ||
1879             IEEE80211_IS_MULTICAST(macaddr))
1880                 ni = ieee80211_ref_node(vap->iv_bss);
1881         else
1882                 ni = ieee80211_find_node_locked(nt, macaddr);
1883         IEEE80211_NODE_UNLOCK(nt);
1884
1885         if (ni == NULL) {
1886                 if (vap->iv_opmode == IEEE80211_M_IBSS ||
1887                     vap->iv_opmode == IEEE80211_M_AHDEMO) {
1888                         /*
1889                          * In adhoc mode cons up a node for the destination.
1890                          * Note that we need an additional reference for the
1891                          * caller to be consistent with
1892                          * ieee80211_find_node_locked.
1893                          */
1894                         /*
1895                          * XXX TODO: this doesn't fake up 11n state; we need
1896                          * to find another way to get it upgraded.
1897                          */
1898                         ni = ieee80211_fakeup_adhoc_node(vap, macaddr);
1899                         if (ni != NULL)
1900                                 (void) ieee80211_ref_node(ni);
1901                 } else {
1902                         IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr,
1903                             "no node, discard frame (%s)", __func__);
1904                         vap->iv_stats.is_tx_nonode++;
1905                 }
1906         }
1907         return ni;
1908 }
1909
1910 static void
1911 _ieee80211_free_node(struct ieee80211_node *ni)
1912 {
1913         struct ieee80211_node_table *nt = ni->ni_table;
1914
1915         /*
1916          * NB: careful about referencing the vap as it may be
1917          * gone if the last reference was held by a driver.
1918          * We know the com will always be present so it's safe
1919          * to use ni_ic below to reclaim resources.
1920          */
1921 #if 0
1922         IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
1923                 "%s %p<%s> in %s table\n", __func__, ni,
1924                 ether_sprintf(ni->ni_macaddr),
1925                 nt != NULL ? nt->nt_name : "<gone>");
1926 #endif
1927         if (ni->ni_associd != 0) {
1928                 struct ieee80211vap *vap = ni->ni_vap;
1929                 if (vap->iv_aid_bitmap != NULL)
1930                         IEEE80211_AID_CLR(vap, ni->ni_associd);
1931         }
1932         if (nt != NULL)
1933                 ieee80211_del_node_nt(nt, ni);
1934         ni->ni_ic->ic_node_free(ni);
1935 }
1936
1937 /*
1938  * Clear any entry in the unicast key mapping table.
1939  */
1940 static int
1941 node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
1942 {
1943         ieee80211_keyix keyix;
1944
1945         keyix = ni->ni_ucastkey.wk_rxkeyix;
1946         if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax &&
1947             nt->nt_keyixmap[keyix] == ni) {
1948                 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
1949                         "%s: %p<%s> clear key map entry %u\n",
1950                         __func__, ni, ether_sprintf(ni->ni_macaddr), keyix);
1951                 nt->nt_keyixmap[keyix] = NULL;
1952                 ieee80211_node_decref(ni);
1953                 return 1;
1954         }
1955
1956         return 0;
1957 }
1958
1959 void
1960 #ifdef IEEE80211_DEBUG_REFCNT
1961 ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line)
1962 #else
1963 ieee80211_free_node(struct ieee80211_node *ni)
1964 #endif
1965 {
1966         struct ieee80211_node_table *nt = ni->ni_table;
1967
1968 #ifdef IEEE80211_DEBUG_REFCNT
1969         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
1970                 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni,
1971                  ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1);
1972 #endif
1973         if (nt != NULL) {
1974                 IEEE80211_NODE_LOCK(nt);
1975                 if (ieee80211_node_dectestref(ni)) {
1976                         /*
1977                          * Last reference, reclaim state.
1978                          */
1979                         _ieee80211_free_node(ni);
1980                 } else if (ieee80211_node_refcnt(ni) == 1)
1981                         if (node_clear_keyixmap(nt, ni))
1982                                 _ieee80211_free_node(ni);
1983                 IEEE80211_NODE_UNLOCK(nt);
1984         } else {
1985                 if (ieee80211_node_dectestref(ni))
1986                         _ieee80211_free_node(ni);
1987         }
1988 }
1989
1990 /*
1991  * Reclaim a unicast key and clear any key cache state.
1992  */
1993 int
1994 ieee80211_node_delucastkey(struct ieee80211_node *ni)
1995 {
1996         struct ieee80211com *ic = ni->ni_ic;
1997         struct ieee80211_node_table *nt = &ic->ic_sta;
1998         struct ieee80211_node *nikey;
1999         ieee80211_keyix keyix;
2000         int isowned, status;
2001
2002         /*
2003          * NB: We must beware of LOR here; deleting the key
2004          * can cause the crypto layer to block traffic updates
2005          * which can generate a LOR against the node table lock;
2006          * grab it here and stash the key index for our use below.
2007          *
2008          * Must also beware of recursion on the node table lock.
2009          * When called from node_cleanup we may already have
2010          * the node table lock held.  Unfortunately there's no
2011          * way to separate out this path so we must do this
2012          * conditionally.
2013          */
2014         isowned = IEEE80211_NODE_IS_LOCKED(nt);
2015         if (!isowned)
2016                 IEEE80211_NODE_LOCK(nt);
2017         nikey = NULL;
2018         status = 1;             /* NB: success */
2019         if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) {
2020                 keyix = ni->ni_ucastkey.wk_rxkeyix;
2021                 status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey);
2022                 if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) {
2023                         nikey = nt->nt_keyixmap[keyix];
2024                         nt->nt_keyixmap[keyix] = NULL;
2025                 }
2026         }
2027         if (!isowned)
2028                 IEEE80211_NODE_UNLOCK(nt);
2029
2030         if (nikey != NULL) {
2031                 KASSERT(nikey == ni,
2032                         ("key map out of sync, ni %p nikey %p", ni, nikey));
2033                 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
2034                         "%s: delete key map entry %p<%s> refcnt %d\n",
2035                         __func__, ni, ether_sprintf(ni->ni_macaddr),
2036                         ieee80211_node_refcnt(ni)-1);
2037                 ieee80211_free_node(ni);
2038         }
2039         return status;
2040 }
2041
2042 /*
2043  * Reclaim a node.  If this is the last reference count then
2044  * do the normal free work.  Otherwise remove it from the node
2045  * table and mark it gone by clearing the back-reference.
2046  */
2047 static void
2048 node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
2049 {
2050
2051         IEEE80211_NODE_LOCK_ASSERT(nt);
2052
2053         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
2054                 "%s: remove %p<%s> from %s table, refcnt %d\n",
2055                 __func__, ni, ether_sprintf(ni->ni_macaddr),
2056                 nt->nt_name, ieee80211_node_refcnt(ni)-1);
2057         /*
2058          * Clear any entry in the unicast key mapping table.
2059          * We need to do it here so rx lookups don't find it
2060          * in the mapping table even if it's not in the hash
2061          * table.  We cannot depend on the mapping table entry
2062          * being cleared because the node may not be free'd.
2063          */
2064         (void)node_clear_keyixmap(nt, ni);
2065         if (!ieee80211_node_dectestref(ni)) {
2066                 /*
2067                  * Other references are present, just remove the
2068                  * node from the table so it cannot be found.  When
2069                  * the references are dropped storage will be
2070                  * reclaimed.
2071                  */
2072                 ieee80211_del_node_nt(nt, ni);
2073         } else
2074                 _ieee80211_free_node(ni);
2075 }
2076
2077 /*
2078  * Node table support.
2079  */
2080
2081 static void
2082 ieee80211_node_table_init(struct ieee80211com *ic,
2083         struct ieee80211_node_table *nt,
2084         const char *name, int inact, int keyixmax)
2085 {
2086
2087         nt->nt_ic = ic;
2088         IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name);
2089         TAILQ_INIT(&nt->nt_node);
2090         nt->nt_count = 0;
2091         nt->nt_name = name;
2092         nt->nt_inact_init = inact;
2093         nt->nt_keyixmax = keyixmax;
2094         if (nt->nt_keyixmax > 0) {
2095                 nt->nt_keyixmap = (struct ieee80211_node **) IEEE80211_MALLOC(
2096                         keyixmax * sizeof(struct ieee80211_node *),
2097                         M_80211_NODE,
2098                         IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
2099                 if (nt->nt_keyixmap == NULL)
2100                         ic_printf(ic,
2101                             "Cannot allocate key index map with %u entries\n",
2102                             keyixmax);
2103         } else
2104                 nt->nt_keyixmap = NULL;
2105 }
2106
2107 static void
2108 ieee80211_node_table_reset(struct ieee80211_node_table *nt,
2109         struct ieee80211vap *match)
2110 {
2111         struct ieee80211_node *ni, *next;
2112
2113         IEEE80211_NODE_LOCK(nt);
2114         TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) {
2115                 if (match != NULL && ni->ni_vap != match)
2116                         continue;
2117                 /* XXX can this happen?  if so need's work */
2118                 if (ni->ni_associd != 0) {
2119                         struct ieee80211vap *vap = ni->ni_vap;
2120
2121                         if (vap->iv_auth->ia_node_leave != NULL)
2122                                 vap->iv_auth->ia_node_leave(ni);
2123                         if (vap->iv_aid_bitmap != NULL)
2124                                 IEEE80211_AID_CLR(vap, ni->ni_associd);
2125                 }
2126                 ni->ni_wdsvap = NULL;           /* clear reference */
2127                 node_reclaim(nt, ni);
2128         }
2129         if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) {
2130                 /*
2131                  * Make a separate pass to clear references to this vap
2132                  * held by DWDS entries.  They will not be matched above
2133                  * because ni_vap will point to the ap vap but we still
2134                  * need to clear ni_wdsvap when the WDS vap is destroyed
2135                  * and/or reset.
2136                  */
2137                 TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next)
2138                         if (ni->ni_wdsvap == match)
2139                                 ni->ni_wdsvap = NULL;
2140         }
2141         IEEE80211_NODE_UNLOCK(nt);
2142 }
2143
2144 static void
2145 ieee80211_node_table_cleanup(struct ieee80211_node_table *nt)
2146 {
2147         ieee80211_node_table_reset(nt, NULL);
2148         if (nt->nt_keyixmap != NULL) {
2149 #ifdef DIAGNOSTIC
2150                 /* XXX verify all entries are NULL */
2151                 int i;
2152                 for (i = 0; i < nt->nt_keyixmax; i++)
2153                         if (nt->nt_keyixmap[i] != NULL)
2154                                 printf("%s: %s[%u] still active\n", __func__,
2155                                         nt->nt_name, i);
2156 #endif
2157                 IEEE80211_FREE(nt->nt_keyixmap, M_80211_NODE);
2158                 nt->nt_keyixmap = NULL;
2159         }
2160         IEEE80211_NODE_LOCK_DESTROY(nt);
2161 }
2162
2163 static void
2164 timeout_stations(void *arg __unused, struct ieee80211_node *ni)
2165 {
2166         struct ieee80211com *ic = ni->ni_ic;
2167         struct ieee80211vap *vap = ni->ni_vap;
2168
2169         /*
2170          * Only process stations when in RUN state.  This
2171          * insures, for example, that we don't timeout an
2172          * inactive station during CAC.  Note that CSA state
2173          * is actually handled in ieee80211_node_timeout as
2174          * it applies to more than timeout processing.
2175          */
2176         if (vap->iv_state != IEEE80211_S_RUN)
2177                 return;
2178         /*
2179          * Ignore entries for which have yet to receive an
2180          * authentication frame.  These are transient and
2181          * will be reclaimed when the last reference to them
2182          * goes away (when frame xmits complete).
2183          */
2184         if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
2185              vap->iv_opmode == IEEE80211_M_STA) &&
2186             (ni->ni_flags & IEEE80211_NODE_AREF) == 0)
2187                 return;
2188         /*
2189          * Free fragment if not needed anymore
2190          * (last fragment older than 1s).
2191          * XXX doesn't belong here, move to node_age
2192          */
2193         if (ni->ni_rxfrag[0] != NULL &&
2194             ticks > ni->ni_rxfragstamp + hz) {
2195                 m_freem(ni->ni_rxfrag[0]);
2196                 ni->ni_rxfrag[0] = NULL;
2197         }
2198         if (ni->ni_inact > 0) {
2199                 ni->ni_inact--;
2200                 IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
2201                     "%s: inact %u inact_reload %u nrates %u",
2202                     __func__, ni->ni_inact, ni->ni_inact_reload,
2203                     ni->ni_rates.rs_nrates);
2204         }
2205         /*
2206          * Special case ourself; we may be idle for extended periods
2207          * of time and regardless reclaiming our state is wrong.
2208          * XXX run ic_node_age
2209          */
2210         /* XXX before inact decrement? */
2211         if (ni == vap->iv_bss)
2212                 return;
2213         if (ni->ni_associd != 0 || 
2214             (vap->iv_opmode == IEEE80211_M_IBSS ||
2215              vap->iv_opmode == IEEE80211_M_AHDEMO)) {
2216                 /*
2217                  * Age/drain resources held by the station.
2218                  */
2219                 ic->ic_node_age(ni);
2220                 /*
2221                  * Probe the station before time it out.  We
2222                  * send a null data frame which may not be
2223                  * universally supported by drivers (need it
2224                  * for ps-poll support so it should be...).
2225                  *
2226                  * XXX don't probe the station unless we've
2227                  *     received a frame from them (and have
2228                  *     some idea of the rates they are capable
2229                  *     of); this will get fixed more properly
2230                  *     soon with better handling of the rate set.
2231                  */
2232                 if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
2233                     (0 < ni->ni_inact &&
2234                      ni->ni_inact <= vap->iv_inact_probe) &&
2235                     ni->ni_rates.rs_nrates != 0) {
2236                         IEEE80211_NOTE(vap,
2237                             IEEE80211_MSG_INACT | IEEE80211_MSG_NODE,
2238                             ni, "%s",
2239                             "probe station due to inactivity");
2240                         /*
2241                          * Grab a reference so the node cannot
2242                          * be reclaimed before we send the frame.
2243                          * ieee80211_send_nulldata understands
2244                          * we've done this and reclaims the
2245                          * ref for us as needed.
2246                          */
2247                         /* XXX fix this (not required anymore). */
2248                         ieee80211_ref_node(ni);
2249                         /* XXX useless */
2250                         ieee80211_send_nulldata(ni);
2251                         /* XXX stat? */
2252                         return;
2253                 }
2254         }
2255         if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
2256             ni->ni_inact <= 0) {
2257                 IEEE80211_NOTE(vap,
2258                     IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni,
2259                     "station timed out due to inactivity "
2260                     "(refcnt %u)", ieee80211_node_refcnt(ni));
2261                 /*
2262                  * Send a deauthenticate frame and drop the station.
2263                  * This is somewhat complicated due to reference counts
2264                  * and locking.  At this point a station will typically
2265                  * have a reference count of 2.  ieee80211_node_leave
2266                  * will do a "free" of the node which will drop the
2267                  * reference count.  But in the meantime a reference
2268                  * wil be held by the deauth frame.  The actual reclaim
2269                  * of the node will happen either after the tx is
2270                  * completed or by ieee80211_node_leave.
2271                  */
2272                 if (ni->ni_associd != 0) {
2273                         IEEE80211_SEND_MGMT(ni,
2274                             IEEE80211_FC0_SUBTYPE_DEAUTH,
2275                             IEEE80211_REASON_AUTH_EXPIRE);
2276                 }
2277                 ieee80211_node_leave(ni);
2278                 vap->iv_stats.is_node_timeout++;
2279         }
2280 }
2281
2282 /*
2283  * Timeout inactive stations and do related housekeeping.
2284  */
2285 static void
2286 ieee80211_timeout_stations(struct ieee80211com *ic)
2287 {
2288         struct ieee80211_node_table *nt = &ic->ic_sta;
2289
2290         ieee80211_iterate_nodes(nt, timeout_stations, NULL);
2291 }
2292
2293 /*
2294  * Aggressively reclaim resources.  This should be used
2295  * only in a critical situation to reclaim mbuf resources.
2296  */
2297 void
2298 ieee80211_drain(struct ieee80211com *ic)
2299 {
2300         struct ieee80211_node_table *nt = &ic->ic_sta;
2301         struct ieee80211vap *vap;
2302         struct ieee80211_node *ni;
2303
2304         IEEE80211_NODE_LOCK(nt);
2305         TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
2306                 /*
2307                  * Ignore entries for which have yet to receive an
2308                  * authentication frame.  These are transient and
2309                  * will be reclaimed when the last reference to them
2310                  * goes away (when frame xmits complete).
2311                  */
2312                 vap = ni->ni_vap;
2313                 /*
2314                  * Only process stations when in RUN state.  This
2315                  * insures, for example, that we don't timeout an
2316                  * inactive station during CAC.  Note that CSA state
2317                  * is actually handled in ieee80211_node_timeout as
2318                  * it applies to more than timeout processing.
2319                  */
2320                 if (vap->iv_state != IEEE80211_S_RUN)
2321                         continue;
2322                 /* XXX can vap be NULL? */
2323                 if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
2324                      vap->iv_opmode == IEEE80211_M_STA) &&
2325                     (ni->ni_flags & IEEE80211_NODE_AREF) == 0)
2326                         continue;
2327                 /*
2328                  * Free fragments.
2329                  * XXX doesn't belong here, move to node_drain
2330                  */
2331                 if (ni->ni_rxfrag[0] != NULL) {
2332                         m_freem(ni->ni_rxfrag[0]);
2333                         ni->ni_rxfrag[0] = NULL;
2334                 }
2335                 /*
2336                  * Drain resources held by the station.
2337                  */
2338                 ic->ic_node_drain(ni);
2339         }
2340         IEEE80211_NODE_UNLOCK(nt);
2341 }
2342
2343 /*
2344  * Per-ieee80211com inactivity timer callback.
2345  */
2346 void
2347 ieee80211_node_timeout(void *arg)
2348 {
2349         struct ieee80211com *ic = arg;
2350
2351         /*
2352          * Defer timeout processing if a channel switch is pending.
2353          * We typically need to be mute so not doing things that
2354          * might generate frames is good to handle in one place.
2355          * Suppressing the station timeout processing may extend the
2356          * lifetime of inactive stations (by not decrementing their
2357          * idle counters) but this should be ok unless the CSA is
2358          * active for an unusually long time.
2359          */
2360         if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) {
2361                 ieee80211_scan_timeout(ic);
2362                 ieee80211_timeout_stations(ic);
2363                 ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT);
2364
2365                 IEEE80211_LOCK(ic);
2366                 ieee80211_erp_timeout(ic);
2367                 ieee80211_ht_timeout(ic);
2368                 IEEE80211_UNLOCK(ic);
2369         }
2370         callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
2371                 ieee80211_node_timeout, ic);
2372 }
2373
2374 /*
2375  * The same as ieee80211_iterate_nodes(), but for one vap only.
2376  */
2377 int
2378 ieee80211_iterate_nodes_vap(struct ieee80211_node_table *nt,
2379     struct ieee80211vap *vap, ieee80211_iter_func *f, void *arg)
2380 {
2381         struct ieee80211_node **ni_arr;
2382         struct ieee80211_node *ni;
2383         size_t size;
2384         int count, i;
2385
2386         /*
2387          * Iterate over the node table and save an array of ref'ed nodes.
2388          *
2389          * This is separated out from calling the actual node function so that
2390          * no LORs will occur.
2391          */
2392         IEEE80211_NODE_LOCK(nt);
2393         count = nt->nt_count;
2394         size = count * sizeof(struct ieee80211_node *);
2395         ni_arr = (struct ieee80211_node **) IEEE80211_MALLOC(size, M_80211_NODE,
2396             IEEE80211_M_NOWAIT | IEEE80211_M_ZERO);
2397         if (ni_arr == NULL) {
2398                 IEEE80211_NODE_UNLOCK(nt);
2399                 return (ENOMEM);
2400         }
2401
2402         i = 0;
2403         TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
2404                 if (vap != NULL && ni->ni_vap != vap)
2405                         continue;
2406                 KASSERT(i < count,
2407                     ("node array overflow (vap %p, i %d, count %d)\n",
2408                     vap, i, count));
2409                 ni_arr[i] = ieee80211_ref_node(ni);
2410                 i++;
2411         }
2412         IEEE80211_NODE_UNLOCK(nt);
2413
2414         for (i = 0; i < count; i++) {
2415                 if (ni_arr[i] == NULL)  /* end of the list */
2416                         break;
2417                 (*f)(arg, ni_arr[i]);
2418                 /* ieee80211_free_node() locks by itself */
2419                 ieee80211_free_node(ni_arr[i]);
2420         }
2421
2422         IEEE80211_FREE(ni_arr, M_80211_NODE);
2423
2424         return (0);
2425 }
2426
2427 /*
2428  * Just a wrapper, so we don't have to change every ieee80211_iterate_nodes()
2429  * reference in the source.
2430  */
2431 void
2432 ieee80211_iterate_nodes(struct ieee80211_node_table *nt,
2433         ieee80211_iter_func *f, void *arg)
2434 {
2435         /* XXX no way to pass error to the caller. */
2436         (void) ieee80211_iterate_nodes_vap(nt, NULL, f, arg);
2437 }
2438
2439 void
2440 ieee80211_dump_node(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
2441 {
2442         printf("0x%p: mac %s refcnt %d\n", ni,
2443                 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni));
2444         printf("\tauthmode %u flags 0x%x\n",
2445                 ni->ni_authmode, ni->ni_flags);
2446         printf("\tassocid 0x%x txpower %u vlan %u\n",
2447                 ni->ni_associd, ni->ni_txpower, ni->ni_vlan);
2448         printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n",
2449                 ni->ni_txseqs[IEEE80211_NONQOS_TID],
2450                 ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT,
2451                 ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK,
2452                 ni->ni_rxfragstamp);
2453         printf("\trssi %d noise %d intval %u capinfo 0x%x\n",
2454                 node_getrssi(ni), ni->ni_noise,
2455                 ni->ni_intval, ni->ni_capinfo);
2456         printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n",
2457                 ether_sprintf(ni->ni_bssid),
2458                 ni->ni_esslen, ni->ni_essid,
2459                 ni->ni_chan->ic_freq, ni->ni_chan->ic_flags);
2460         printf("\tinact %u inact_reload %u txrate %u\n",
2461                 ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate);
2462         printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n",
2463                 ni->ni_htcap, ni->ni_htparam,
2464                 ni->ni_htctlchan, ni->ni_ht2ndchan);
2465         printf("\thtopmode %x htstbc %x chw %u\n",
2466                 ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw);
2467 }
2468
2469 void
2470 ieee80211_dump_nodes(struct ieee80211_node_table *nt)
2471 {
2472         ieee80211_iterate_nodes(nt,
2473                 (ieee80211_iter_func *) ieee80211_dump_node, nt);
2474 }
2475
2476 static void
2477 ieee80211_notify_erp_locked(struct ieee80211com *ic)
2478 {
2479         struct ieee80211vap *vap;
2480
2481         IEEE80211_LOCK_ASSERT(ic);
2482
2483         TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
2484                 if (vap->iv_opmode == IEEE80211_M_HOSTAP)
2485                         ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP);
2486 }
2487
2488 void
2489 ieee80211_notify_erp(struct ieee80211com *ic)
2490 {
2491         IEEE80211_LOCK(ic);
2492         ieee80211_notify_erp_locked(ic);
2493         IEEE80211_UNLOCK(ic);
2494 }
2495
2496 /*
2497  * Handle a station joining an 11g network.
2498  */
2499 static void
2500 ieee80211_node_join_11g(struct ieee80211_node *ni)
2501 {
2502         struct ieee80211com *ic = ni->ni_ic;
2503
2504         IEEE80211_LOCK_ASSERT(ic);
2505
2506         /*
2507          * Station isn't capable of short slot time.  Bump
2508          * the count of long slot time stations and disable
2509          * use of short slot time.  Note that the actual switch
2510          * over to long slot time use may not occur until the
2511          * next beacon transmission (per sec. 7.3.1.4 of 11g).
2512          */
2513         if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
2514                 ic->ic_longslotsta++;
2515                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
2516                     "station needs long slot time, count %d",
2517                     ic->ic_longslotsta);
2518                 /* XXX vap's w/ conflicting needs won't work */
2519                 if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) {
2520                         /*
2521                          * Don't force slot time when switched to turbo
2522                          * mode as non-ERP stations won't be present; this
2523                          * need only be done when on the normal G channel.
2524                          */
2525                         ieee80211_set_shortslottime(ic, 0);
2526                 }
2527         }
2528         /*
2529          * If the new station is not an ERP station
2530          * then bump the counter and enable protection
2531          * if configured.
2532          */
2533         if (!ieee80211_iserp_rateset(&ni->ni_rates)) {
2534                 ic->ic_nonerpsta++;
2535                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
2536                     "station is !ERP, %d non-ERP stations associated",
2537                     ic->ic_nonerpsta);
2538                 /*
2539                  * If station does not support short preamble
2540                  * then we must enable use of Barker preamble.
2541                  */
2542                 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) {
2543                         IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
2544                             "%s", "station needs long preamble");
2545                         ic->ic_flags |= IEEE80211_F_USEBARKER;
2546                         ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE;
2547                 }
2548                 /*
2549                  * If protection is configured and this is the first
2550                  * indication we should use protection, enable it.
2551                  */
2552                 if (ic->ic_protmode != IEEE80211_PROT_NONE &&
2553                     ic->ic_nonerpsta == 1 &&
2554                     (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
2555                         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
2556                             "%s: enable use of protection\n", __func__);
2557                         ic->ic_flags |= IEEE80211_F_USEPROT;
2558                         ieee80211_notify_erp_locked(ic);
2559                 }
2560         } else
2561                 ni->ni_flags |= IEEE80211_NODE_ERP;
2562 }
2563
2564 void
2565 ieee80211_node_join(struct ieee80211_node *ni, int resp)
2566 {
2567         struct ieee80211com *ic = ni->ni_ic;
2568         struct ieee80211vap *vap = ni->ni_vap;
2569         int newassoc;
2570
2571         if (ni->ni_associd == 0) {
2572                 uint16_t aid;
2573
2574                 KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap"));
2575                 /*
2576                  * It would be good to search the bitmap
2577                  * more efficiently, but this will do for now.
2578                  */
2579                 for (aid = 1; aid < vap->iv_max_aid; aid++) {
2580                         if (!IEEE80211_AID_ISSET(vap, aid))
2581                                 break;
2582                 }
2583                 if (aid >= vap->iv_max_aid) {
2584                         IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY);
2585                         ieee80211_node_leave(ni);
2586                         return;
2587                 }
2588                 ni->ni_associd = aid | 0xc000;
2589                 ni->ni_jointime = time_uptime;
2590                 IEEE80211_LOCK(ic);
2591                 IEEE80211_AID_SET(vap, ni->ni_associd);
2592                 vap->iv_sta_assoc++;
2593                 ic->ic_sta_assoc++;
2594
2595                 if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
2596                         ieee80211_ht_node_join(ni);
2597                 if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
2598                     IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
2599                         ieee80211_node_join_11g(ni);
2600                 IEEE80211_UNLOCK(ic);
2601
2602                 newassoc = 1;
2603         } else
2604                 newassoc = 0;
2605
2606         IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
2607             "station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s",
2608             IEEE80211_NODE_AID(ni),
2609             ic->ic_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long",
2610             ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long",
2611             ic->ic_flags & IEEE80211_F_USEPROT ? ", protection" : "",
2612             ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "",
2613             ni->ni_flags & IEEE80211_NODE_HT ?
2614                 (ni->ni_chw == 40 ? ", HT40" : ", HT20") : "",
2615             ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "",
2616             ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" :
2617                 ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "",
2618             ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "",
2619             IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ?
2620                 ", fast-frames" : "",
2621             IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ?
2622                 ", turbo" : ""
2623         );
2624
2625         ieee80211_node_setuptxparms(ni);
2626         ieee80211_ratectl_node_init(ni);
2627         /* give driver a chance to setup state like ni_txrate */
2628         if (ic->ic_newassoc != NULL)
2629                 ic->ic_newassoc(ni, newassoc);
2630         IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS);
2631         /* tell the authenticator about new station */
2632         if (vap->iv_auth->ia_node_join != NULL)
2633                 vap->iv_auth->ia_node_join(ni);
2634         ieee80211_notify_node_join(ni,
2635             resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
2636 }
2637
2638 static void
2639 disable_protection(struct ieee80211com *ic)
2640 {
2641         KASSERT(ic->ic_nonerpsta == 0 &&
2642             (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0,
2643            ("%d non ERP stations, flags 0x%x", ic->ic_nonerpsta,
2644            ic->ic_flags_ext));
2645
2646         ic->ic_flags &= ~IEEE80211_F_USEPROT;
2647         /* XXX verify mode? */
2648         if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) {
2649                 ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
2650                 ic->ic_flags &= ~IEEE80211_F_USEBARKER;
2651         }
2652         ieee80211_notify_erp_locked(ic);
2653 }
2654
2655 /*
2656  * Handle a station leaving an 11g network.
2657  */
2658 static void
2659 ieee80211_node_leave_11g(struct ieee80211_node *ni)
2660 {
2661         struct ieee80211com *ic = ni->ni_ic;
2662
2663         IEEE80211_LOCK_ASSERT(ic);
2664
2665         KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan),
2666              ("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq,
2667               ic->ic_bsschan->ic_flags));
2668
2669         /*
2670          * If a long slot station do the slot time bookkeeping.
2671          */
2672         if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
2673                 KASSERT(ic->ic_longslotsta > 0,
2674                     ("bogus long slot station count %d", ic->ic_longslotsta));
2675                 ic->ic_longslotsta--;
2676                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
2677                     "long slot time station leaves, count now %d",
2678                     ic->ic_longslotsta);
2679                 if (ic->ic_longslotsta == 0) {
2680                         /*
2681                          * Re-enable use of short slot time if supported
2682                          * and not operating in IBSS mode (per spec).
2683                          */
2684                         if ((ic->ic_caps & IEEE80211_C_SHSLOT) &&
2685                             ic->ic_opmode != IEEE80211_M_IBSS) {
2686                                 IEEE80211_DPRINTF(ni->ni_vap,
2687                                     IEEE80211_MSG_ASSOC,
2688                                     "%s: re-enable use of short slot time\n",
2689                                     __func__);
2690                                 ieee80211_set_shortslottime(ic, 1);
2691                         }
2692                 }
2693         }
2694         /*
2695          * If a non-ERP station do the protection-related bookkeeping.
2696          */
2697         if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) {
2698                 KASSERT(ic->ic_nonerpsta > 0,
2699                     ("bogus non-ERP station count %d", ic->ic_nonerpsta));
2700                 ic->ic_nonerpsta--;
2701                 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
2702                     "non-ERP station leaves, count now %d%s", ic->ic_nonerpsta,
2703                     (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) ?
2704                         " (non-ERP sta present)" : "");
2705                 if (ic->ic_nonerpsta == 0 &&
2706                     (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
2707                         IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
2708                                 "%s: disable use of protection\n", __func__);
2709                         disable_protection(ic);
2710                 }
2711         }
2712 }
2713
2714 /*
2715  * Time out presence of an overlapping bss with non-ERP
2716  * stations.  When operating in hostap mode we listen for
2717  * beacons from other stations and if we identify a non-ERP
2718  * station is present we enable protection.  To identify
2719  * when all non-ERP stations are gone we time out this
2720  * condition.
2721  */
2722 static void
2723 ieee80211_erp_timeout(struct ieee80211com *ic)
2724 {
2725
2726         IEEE80211_LOCK_ASSERT(ic);
2727
2728         if ((ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) &&
2729             ieee80211_time_after(ticks, ic->ic_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) {
2730 #if 0
2731                 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni,
2732                     "%s", "age out non-ERP sta present on channel");
2733 #endif
2734                 ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR;
2735                 if (ic->ic_nonerpsta == 0)
2736                         disable_protection(ic);
2737         }
2738 }
2739
2740 /*
2741  * Handle bookkeeping for station deauthentication/disassociation
2742  * when operating as an ap.
2743  */
2744 void
2745 ieee80211_node_leave(struct ieee80211_node *ni)
2746 {
2747         struct ieee80211com *ic = ni->ni_ic;
2748         struct ieee80211vap *vap = ni->ni_vap;
2749         struct ieee80211_node_table *nt = ni->ni_table;
2750
2751         IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
2752             "station with aid %d leaves", IEEE80211_NODE_AID(ni));
2753
2754         KASSERT(vap->iv_opmode != IEEE80211_M_STA,
2755                 ("unexpected operating mode %u", vap->iv_opmode));
2756         /*
2757          * If node wasn't previously associated all
2758          * we need to do is reclaim the reference.
2759          */
2760         /* XXX ibss mode bypasses 11g and notification */
2761         if (ni->ni_associd == 0)
2762                 goto done;
2763         /*
2764          * Tell the authenticator the station is leaving.
2765          * Note that we must do this before yanking the
2766          * association id as the authenticator uses the
2767          * associd to locate it's state block.
2768          */
2769         if (vap->iv_auth->ia_node_leave != NULL)
2770                 vap->iv_auth->ia_node_leave(ni);
2771
2772         IEEE80211_LOCK(ic);
2773         IEEE80211_AID_CLR(vap, ni->ni_associd);
2774         vap->iv_sta_assoc--;
2775         ic->ic_sta_assoc--;
2776
2777         if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
2778                 ieee80211_ht_node_leave(ni);
2779         if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
2780             IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
2781                 ieee80211_node_leave_11g(ni);
2782         IEEE80211_UNLOCK(ic);
2783         /*
2784          * Cleanup station state.  In particular clear various
2785          * state that might otherwise be reused if the node
2786          * is reused before the reference count goes to zero
2787          * (and memory is reclaimed).
2788          */
2789         ieee80211_sta_leave(ni);
2790 done:
2791         /*
2792          * Remove the node from any table it's recorded in and
2793          * drop the caller's reference.  Removal from the table
2794          * is important to insure the node is not reprocessed
2795          * for inactivity.
2796          */
2797         if (nt != NULL) {
2798                 IEEE80211_NODE_LOCK(nt);
2799                 node_reclaim(nt, ni);
2800                 IEEE80211_NODE_UNLOCK(nt);
2801         } else
2802                 ieee80211_free_node(ni);
2803 }
2804
2805 struct rssiinfo {
2806         int     rssi_samples;
2807         uint32_t rssi_total;
2808 };
2809
2810 static void
2811 get_hostap_rssi(void *arg, struct ieee80211_node *ni)
2812 {
2813         struct rssiinfo *info = arg;
2814         struct ieee80211vap *vap = ni->ni_vap;
2815         int8_t rssi;
2816
2817         /* only associated stations */
2818         if (ni->ni_associd == 0)
2819                 return;
2820         rssi = vap->iv_ic->ic_node_getrssi(ni);
2821         if (rssi != 0) {
2822                 info->rssi_samples++;
2823                 info->rssi_total += rssi;
2824         }
2825 }
2826
2827 static void
2828 get_adhoc_rssi(void *arg, struct ieee80211_node *ni)
2829 {
2830         struct rssiinfo *info = arg;
2831         struct ieee80211vap *vap = ni->ni_vap;
2832         int8_t rssi;
2833
2834         /* only neighbors */
2835         /* XXX check bssid */
2836         if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
2837                 return;
2838         rssi = vap->iv_ic->ic_node_getrssi(ni);
2839         if (rssi != 0) {
2840                 info->rssi_samples++;
2841                 info->rssi_total += rssi;
2842         }
2843 }
2844
2845 #ifdef IEEE80211_SUPPORT_MESH
2846 static void
2847 get_mesh_rssi(void *arg, struct ieee80211_node *ni)
2848 {
2849         struct rssiinfo *info = arg;
2850         struct ieee80211vap *vap = ni->ni_vap;
2851         int8_t rssi;
2852
2853         /* only neighbors that peered successfully */
2854         if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
2855                 return;
2856         rssi = vap->iv_ic->ic_node_getrssi(ni);
2857         if (rssi != 0) {
2858                 info->rssi_samples++;
2859                 info->rssi_total += rssi;
2860         }
2861 }
2862 #endif /* IEEE80211_SUPPORT_MESH */
2863
2864 int8_t
2865 ieee80211_getrssi(struct ieee80211vap *vap)
2866 {
2867 #define NZ(x)   ((x) == 0 ? 1 : (x))
2868         struct ieee80211com *ic = vap->iv_ic;
2869         struct rssiinfo info;
2870
2871         info.rssi_total = 0;
2872         info.rssi_samples = 0;
2873         switch (vap->iv_opmode) {
2874         case IEEE80211_M_IBSS:          /* average of all ibss neighbors */
2875         case IEEE80211_M_AHDEMO:        /* average of all neighbors */
2876                 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_adhoc_rssi,
2877                     &info);
2878                 break;
2879         case IEEE80211_M_HOSTAP:        /* average of all associated stations */
2880                 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_hostap_rssi,
2881                     &info);
2882                 break;
2883 #ifdef IEEE80211_SUPPORT_MESH
2884         case IEEE80211_M_MBSS:          /* average of all mesh neighbors */
2885                 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_mesh_rssi,
2886                     &info);
2887                 break;
2888 #endif
2889         case IEEE80211_M_MONITOR:       /* XXX */
2890         case IEEE80211_M_STA:           /* use stats from associated ap */
2891         default:
2892                 if (vap->iv_bss != NULL)
2893                         info.rssi_total = ic->ic_node_getrssi(vap->iv_bss);
2894                 info.rssi_samples = 1;
2895                 break;
2896         }
2897         return info.rssi_total / NZ(info.rssi_samples);
2898 #undef NZ
2899 }
2900
2901 void
2902 ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise)
2903 {
2904
2905         if (vap->iv_bss == NULL)                /* NB: shouldn't happen */
2906                 return;
2907         vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise);
2908         /* for non-station mode return avg'd rssi accounting */
2909         if (vap->iv_opmode != IEEE80211_M_STA)
2910                 *rssi = ieee80211_getrssi(vap);
2911 }