]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/net80211/ieee80211_scan.c
trim(8): Fix a few issues reported by mandoc
[FreeBSD/FreeBSD.git] / sys / net80211 / ieee80211_scan.c
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26  */
27
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
30
31 /*
32  * IEEE 802.11 scanning support.
33  */
34 #include "opt_wlan.h"
35
36 #include <sys/param.h>
37 #include <sys/systm.h> 
38 #include <sys/proc.h>
39 #include <sys/kernel.h>
40 #include <sys/malloc.h>
41 #include <sys/condvar.h>
42
43 #include <sys/socket.h>
44
45 #include <net/if.h>
46 #include <net/if_var.h>
47 #include <net/if_media.h>
48 #include <net/ethernet.h>
49
50 #include <net80211/ieee80211_var.h>
51
52 /* XXX until it's implemented as attach ops */
53 #include <net80211/ieee80211_scan_sw.h>
54
55 #include <net/bpf.h>
56
57 /*
58  * Roaming-related defaults.  RSSI thresholds are as returned by the
59  * driver (.5dBm).  Transmit rate thresholds are IEEE rate codes (i.e
60  * .5M units) or MCS.
61  */
62 /* rssi thresholds */
63 #define ROAM_RSSI_11A_DEFAULT           14      /* 11a bss */
64 #define ROAM_RSSI_11B_DEFAULT           14      /* 11b bss */
65 #define ROAM_RSSI_11BONLY_DEFAULT       14      /* 11b-only bss */
66 /* transmit rate thresholds */
67 #define ROAM_RATE_11A_DEFAULT           2*12    /* 11a bss */
68 #define ROAM_RATE_11B_DEFAULT           2*5     /* 11b bss */
69 #define ROAM_RATE_11BONLY_DEFAULT       2*1     /* 11b-only bss */
70 #define ROAM_RATE_HALF_DEFAULT          2*6     /* half-width 11a/g bss */
71 #define ROAM_RATE_QUARTER_DEFAULT       2*3     /* quarter-width 11a/g bss */
72 #define ROAM_MCS_11N_DEFAULT            (1 | IEEE80211_RATE_MCS) /* 11n bss */
73 #define ROAM_MCS_11AC_DEFAULT           (1 | IEEE80211_RATE_MCS) /* 11ac bss; XXX not used yet */
74
75 void
76 ieee80211_scan_attach(struct ieee80211com *ic)
77 {
78         /*
79          * If there's no scan method pointer, attach the
80          * swscan set as a default.
81          */
82         if (ic->ic_scan_methods == NULL)
83                 ieee80211_swscan_attach(ic);
84         else
85                 ic->ic_scan_methods->sc_attach(ic);
86 }
87
88 void
89 ieee80211_scan_detach(struct ieee80211com *ic)
90 {
91
92         /*
93          * Ideally we'd do the ss_ops detach call here;
94          * but then sc_detach() would need to be split in two.
95          *
96          * I'll do that later.
97          */
98         ic->ic_scan_methods->sc_detach(ic);
99 }
100
101 static const struct ieee80211_roamparam defroam[IEEE80211_MODE_MAX] = {
102         [IEEE80211_MODE_11A]    = { .rssi = ROAM_RSSI_11A_DEFAULT,
103                                     .rate = ROAM_RATE_11A_DEFAULT },
104         [IEEE80211_MODE_11G]    = { .rssi = ROAM_RSSI_11B_DEFAULT,
105                                     .rate = ROAM_RATE_11B_DEFAULT },
106         [IEEE80211_MODE_11B]    = { .rssi = ROAM_RSSI_11BONLY_DEFAULT,
107                                     .rate = ROAM_RATE_11BONLY_DEFAULT },
108         [IEEE80211_MODE_TURBO_A]= { .rssi = ROAM_RSSI_11A_DEFAULT,
109                                     .rate = ROAM_RATE_11A_DEFAULT },
110         [IEEE80211_MODE_TURBO_G]= { .rssi = ROAM_RSSI_11A_DEFAULT,
111                                     .rate = ROAM_RATE_11A_DEFAULT },
112         [IEEE80211_MODE_STURBO_A]={ .rssi = ROAM_RSSI_11A_DEFAULT,
113                                     .rate = ROAM_RATE_11A_DEFAULT },
114         [IEEE80211_MODE_HALF]   = { .rssi = ROAM_RSSI_11A_DEFAULT,
115                                     .rate = ROAM_RATE_HALF_DEFAULT },
116         [IEEE80211_MODE_QUARTER]= { .rssi = ROAM_RSSI_11A_DEFAULT,
117                                     .rate = ROAM_RATE_QUARTER_DEFAULT },
118         [IEEE80211_MODE_11NA]   = { .rssi = ROAM_RSSI_11A_DEFAULT,
119                                     .rate = ROAM_MCS_11N_DEFAULT },
120         [IEEE80211_MODE_11NG]   = { .rssi = ROAM_RSSI_11B_DEFAULT,
121                                     .rate = ROAM_MCS_11N_DEFAULT },
122         [IEEE80211_MODE_VHT_2GHZ]       = { .rssi = ROAM_RSSI_11B_DEFAULT,
123                                     .rate = ROAM_MCS_11AC_DEFAULT },
124         [IEEE80211_MODE_VHT_5GHZ]       = { .rssi = ROAM_RSSI_11A_DEFAULT,
125                                     .rate = ROAM_MCS_11AC_DEFAULT },
126
127 };
128
129 void
130 ieee80211_scan_vattach(struct ieee80211vap *vap)
131 {
132         struct ieee80211com *ic = vap->iv_ic;
133         int m;
134
135         vap->iv_bgscanidle = (IEEE80211_BGSCAN_IDLE_DEFAULT*1000)/hz;
136         vap->iv_bgscanintvl = IEEE80211_BGSCAN_INTVAL_DEFAULT*hz;
137         vap->iv_scanvalid = IEEE80211_SCAN_VALID_DEFAULT*hz;
138
139         vap->iv_roaming = IEEE80211_ROAMING_AUTO;
140
141         memset(vap->iv_roamparms, 0, sizeof(vap->iv_roamparms));
142         for (m = IEEE80211_MODE_AUTO + 1; m < IEEE80211_MODE_MAX; m++) {
143                 if (isclr(ic->ic_modecaps, m))
144                         continue;
145
146                 memcpy(&vap->iv_roamparms[m], &defroam[m], sizeof(defroam[m]));
147         }
148
149         ic->ic_scan_methods->sc_vattach(vap);
150 }
151
152 void
153 ieee80211_scan_vdetach(struct ieee80211vap *vap)
154 {
155         struct ieee80211com *ic = vap->iv_ic;
156         struct ieee80211_scan_state *ss;
157
158         IEEE80211_LOCK(ic);
159         ss = ic->ic_scan;
160
161         ic->ic_scan_methods->sc_vdetach(vap);
162
163         if (ss != NULL && ss->ss_vap == vap) {
164                 if (ss->ss_ops != NULL) {
165                         ss->ss_ops->scan_detach(ss);
166                         ss->ss_ops = NULL;
167                 }
168                 ss->ss_vap = NULL;
169         }
170         IEEE80211_UNLOCK(ic);
171 }
172
173 /*
174  * Simple-minded scanner module support.
175  */
176 static const char *scan_modnames[IEEE80211_OPMODE_MAX] = {
177         "wlan_scan_sta",        /* IEEE80211_M_IBSS */
178         "wlan_scan_sta",        /* IEEE80211_M_STA */
179         "wlan_scan_wds",        /* IEEE80211_M_WDS */
180         "wlan_scan_sta",        /* IEEE80211_M_AHDEMO */
181         "wlan_scan_ap",         /* IEEE80211_M_HOSTAP */
182         "wlan_scan_monitor",    /* IEEE80211_M_MONITOR */
183         "wlan_scan_sta",        /* IEEE80211_M_MBSS */
184 };
185 static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX];
186
187 const struct ieee80211_scanner *
188 ieee80211_scanner_get(enum ieee80211_opmode mode)
189 {
190         if (mode >= IEEE80211_OPMODE_MAX)
191                 return NULL;
192         if (scanners[mode] == NULL)
193                 ieee80211_load_module(scan_modnames[mode]);
194         return scanners[mode];
195 }
196
197 void
198 ieee80211_scanner_register(enum ieee80211_opmode mode,
199         const struct ieee80211_scanner *scan)
200 {
201         if (mode >= IEEE80211_OPMODE_MAX)
202                 return;
203         scanners[mode] = scan;
204 }
205
206 void
207 ieee80211_scanner_unregister(enum ieee80211_opmode mode,
208         const struct ieee80211_scanner *scan)
209 {
210         if (mode >= IEEE80211_OPMODE_MAX)
211                 return;
212         if (scanners[mode] == scan)
213                 scanners[mode] = NULL;
214 }
215
216 void
217 ieee80211_scanner_unregister_all(const struct ieee80211_scanner *scan)
218 {
219         int m;
220
221         for (m = 0; m < IEEE80211_OPMODE_MAX; m++)
222                 if (scanners[m] == scan)
223                         scanners[m] = NULL;
224 }
225
226 /*
227  * Update common scanner state to reflect the current
228  * operating mode.  This is called when the state machine
229  * is transitioned to RUN state w/o scanning--e.g. when
230  * operating in monitor mode.  The purpose of this is to
231  * ensure later callbacks find ss_ops set to properly
232  * reflect current operating mode.
233  */
234 void
235 ieee80211_scan_update_locked(struct ieee80211vap *vap,
236         const struct ieee80211_scanner *scan)
237 {
238         struct ieee80211com *ic = vap->iv_ic;
239         struct ieee80211_scan_state *ss = ic->ic_scan;
240
241         IEEE80211_LOCK_ASSERT(ic);
242
243 #ifdef IEEE80211_DEBUG
244         if (ss->ss_vap != vap || ss->ss_ops != scan) {
245                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
246                     "%s: current scanner is <%s:%s>, switch to <%s:%s>\n",
247                     __func__,
248                     ss->ss_vap != NULL ?
249                         ss->ss_vap->iv_ifp->if_xname : "none",
250                     ss->ss_vap != NULL ?
251                         ieee80211_opmode_name[ss->ss_vap->iv_opmode] : "none",
252                     vap->iv_ifp->if_xname,
253                     ieee80211_opmode_name[vap->iv_opmode]);
254         }
255 #endif
256         ss->ss_vap = vap;
257         if (ss->ss_ops != scan) {
258                 /*
259                  * Switch scanners; detach old, attach new.  Special
260                  * case where a single scan module implements multiple
261                  * policies by using different scan ops but a common
262                  * core.  We assume if the old and new attach methods
263                  * are identical then it's ok to just change ss_ops
264                  * and not flush the internal state of the module.
265                  */
266                 if (scan == NULL || ss->ss_ops == NULL ||
267                     ss->ss_ops->scan_attach != scan->scan_attach) {
268                         if (ss->ss_ops != NULL)
269                                 ss->ss_ops->scan_detach(ss);
270                         if (scan != NULL && !scan->scan_attach(ss)) {
271                                 /* XXX attach failure */
272                                 /* XXX stat+msg */
273                                 scan = NULL;
274                         }
275                 }
276                 ss->ss_ops = scan;
277         }
278 }
279
280 void
281 ieee80211_scan_dump_channels(const struct ieee80211_scan_state *ss)
282 {
283         struct ieee80211com *ic = ss->ss_ic;
284         const char *sep;
285         int i;
286
287         sep = "";
288         for (i = ss->ss_next; i < ss->ss_last; i++) {
289                 const struct ieee80211_channel *c = ss->ss_chans[i];
290
291                 printf("%s%u%c", sep, ieee80211_chan2ieee(ic, c),
292                     ieee80211_channel_type_char(c));
293                 sep = ", ";
294         }
295 }
296
297 #ifdef IEEE80211_DEBUG
298 void
299 ieee80211_scan_dump(struct ieee80211_scan_state *ss)
300 {
301         struct ieee80211vap *vap = ss->ss_vap;
302
303         if_printf(vap->iv_ifp, "scan set ");
304         ieee80211_scan_dump_channels(ss);
305         printf(" dwell min %ums max %ums\n",
306             ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(ss->ss_maxdwell));
307 }
308 #endif /* IEEE80211_DEBUG */
309
310 void
311 ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss,
312         int nssid, const struct ieee80211_scan_ssid ssids[])
313 {
314         if (nssid > IEEE80211_SCAN_MAX_SSID) {
315                 /* XXX printf */
316                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
317                     "%s: too many ssid %d, ignoring all of them\n",
318                     __func__, nssid);
319                 return;
320         }
321         memcpy(ss->ss_ssid, ssids, nssid * sizeof(ssids[0]));
322         ss->ss_nssid = nssid;
323 }
324
325 /*
326  * Start a scan unless one is already going.
327  */
328 int
329 ieee80211_start_scan(struct ieee80211vap *vap, int flags,
330         u_int duration, u_int mindwell, u_int maxdwell,
331         u_int nssid, const struct ieee80211_scan_ssid ssids[])
332 {
333         const struct ieee80211_scanner *scan;
334         struct ieee80211com *ic = vap->iv_ic;
335
336         scan = ieee80211_scanner_get(vap->iv_opmode);
337         if (scan == NULL) {
338                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
339                     "%s: no scanner support for %s mode\n",
340                     __func__, ieee80211_opmode_name[vap->iv_opmode]);
341                 /* XXX stat */
342                 return 0;
343         }
344
345         return ic->ic_scan_methods->sc_start_scan(scan, vap, flags, duration,
346             mindwell, maxdwell, nssid, ssids);
347 }
348
349 /*
350  * Check the scan cache for an ap/channel to use; if that
351  * fails then kick off a new scan.
352  */
353 int
354 ieee80211_check_scan(struct ieee80211vap *vap, int flags,
355         u_int duration, u_int mindwell, u_int maxdwell,
356         u_int nssid, const struct ieee80211_scan_ssid ssids[])
357 {
358         struct ieee80211com *ic = vap->iv_ic;
359         struct ieee80211_scan_state *ss = ic->ic_scan;
360         const struct ieee80211_scanner *scan;
361         int result;
362
363         scan = ieee80211_scanner_get(vap->iv_opmode);
364         if (scan == NULL) {
365                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
366                     "%s: no scanner support for %s mode\n",
367                     __func__, vap->iv_opmode);
368                 /* XXX stat */
369                 return 0;
370         }
371
372         /*
373          * Check if there's a list of scan candidates already.
374          * XXX want more than the ap we're currently associated with
375          */
376
377         IEEE80211_LOCK(ic);
378         IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
379             "%s: %s scan, %s%s%s%s%s\n"
380             , __func__
381             , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"
382             , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append"
383             , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : ""
384             , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : ""
385             , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : ""
386             , flags & IEEE80211_SCAN_ONCE ? ", once" : ""
387         );
388
389         if (ss->ss_ops != scan) {
390                 /* XXX re-use cache contents? e.g. adhoc<->sta */
391                 flags |= IEEE80211_SCAN_FLUSH;
392         }
393
394         /*
395          * XXX TODO: separate things out a bit better.
396          */
397         ieee80211_scan_update_locked(vap, scan);
398
399         result = ic->ic_scan_methods->sc_check_scan(scan, vap, flags, duration,
400             mindwell, maxdwell, nssid, ssids);
401
402         IEEE80211_UNLOCK(ic);
403
404         return (result);
405 }
406
407 /*
408  * Check the scan cache for an ap/channel to use; if that fails
409  * then kick off a scan using the current settings.
410  */
411 int
412 ieee80211_check_scan_current(struct ieee80211vap *vap)
413 {
414         return ieee80211_check_scan(vap,
415             IEEE80211_SCAN_ACTIVE,
416             IEEE80211_SCAN_FOREVER, 0, 0,
417             vap->iv_des_nssid, vap->iv_des_ssid);
418 }
419
420 /*
421  * Restart a previous scan.  If the previous scan completed
422  * then we start again using the existing channel list.
423  */
424 int
425 ieee80211_bg_scan(struct ieee80211vap *vap, int flags)
426 {
427         struct ieee80211com *ic = vap->iv_ic;
428         const struct ieee80211_scanner *scan;
429
430         // IEEE80211_UNLOCK_ASSERT(sc);
431
432         scan = ieee80211_scanner_get(vap->iv_opmode);
433         if (scan == NULL) {
434                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
435                     "%s: no scanner support for %s mode\n",
436                     __func__, vap->iv_opmode);
437                 /* XXX stat */
438                 return 0;
439         }
440
441         /*
442          * XXX TODO: pull apart the bgscan logic into whatever
443          * belongs here and whatever belongs in the software
444          * scanner.
445          */
446         return (ic->ic_scan_methods->sc_bg_scan(scan, vap, flags));
447 }
448
449 /*
450  * Cancel any scan currently going on for the specified vap.
451  */
452 void
453 ieee80211_cancel_scan(struct ieee80211vap *vap)
454 {
455         struct ieee80211com *ic = vap->iv_ic;
456
457         ic->ic_scan_methods->sc_cancel_scan(vap);
458 }
459
460 /*
461  * Cancel any scan currently going on.
462  *
463  * This is called during normal 802.11 data path to cancel
464  * a scan so a newly arrived normal data packet can be sent.
465  */
466 void
467 ieee80211_cancel_anyscan(struct ieee80211vap *vap)
468 {
469         struct ieee80211com *ic = vap->iv_ic;
470
471         ic->ic_scan_methods->sc_cancel_anyscan(vap);
472 }
473
474 /*
475  * Manually switch to the next channel in the channel list.
476  * Provided for drivers that manage scanning themselves
477  * (e.g. for firmware-based devices).
478  */
479 void
480 ieee80211_scan_next(struct ieee80211vap *vap)
481 {
482         struct ieee80211com *ic = vap->iv_ic;
483
484         ic->ic_scan_methods->sc_scan_next(vap);
485 }
486
487 /*
488  * Manually stop a scan that is currently running.
489  * Provided for drivers that are not able to scan single channels
490  * (e.g. for firmware-based devices).
491  */
492 void
493 ieee80211_scan_done(struct ieee80211vap *vap)
494 {
495         struct ieee80211com *ic = vap->iv_ic;
496         struct ieee80211_scan_state *ss;
497
498         IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__);
499
500         IEEE80211_LOCK(ic);
501         ss = ic->ic_scan;
502         ss->ss_next = ss->ss_last; /* all channels are complete */
503
504         ic->ic_scan_methods->sc_scan_done(vap);
505
506         IEEE80211_UNLOCK(ic);
507 }
508
509 /*
510  * Probe the current channel, if allowed, while scanning.
511  * If the channel is not marked passive-only then send
512  * a probe request immediately.  Otherwise mark state and
513  * listen for beacons on the channel; if we receive something
514  * then we'll transmit a probe request.
515  */
516 void
517 ieee80211_probe_curchan(struct ieee80211vap *vap, int force)
518 {
519         struct ieee80211com *ic = vap->iv_ic;
520
521         if ((ic->ic_curchan->ic_flags & IEEE80211_CHAN_PASSIVE) && !force) {
522                 ic->ic_flags_ext |= IEEE80211_FEXT_PROBECHAN;
523                 return;
524         }
525
526         ic->ic_scan_methods->sc_scan_probe_curchan(vap, force);
527 }
528
529 #ifdef IEEE80211_DEBUG
530 static void
531 dump_country(const uint8_t *ie)
532 {
533         const struct ieee80211_country_ie *cie =
534            (const struct ieee80211_country_ie *) ie;
535         int i, nbands, schan, nchan;
536
537         if (cie->len < 3) {
538                 printf(" <bogus country ie, len %d>", cie->len);
539                 return;
540         }
541         printf(" country [%c%c%c", cie->cc[0], cie->cc[1], cie->cc[2]);
542         nbands = (cie->len - 3) / sizeof(cie->band[0]);
543         for (i = 0; i < nbands; i++) {
544                 schan = cie->band[i].schan;
545                 nchan = cie->band[i].nchan;
546                 if (nchan != 1)
547                         printf(" %u-%u,%u", schan, schan + nchan-1,
548                             cie->band[i].maxtxpwr);
549                 else
550                         printf(" %u,%u", schan, cie->band[i].maxtxpwr);
551         }
552         printf("]");
553 }
554
555 void
556 ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew,
557         const uint8_t mac[IEEE80211_ADDR_LEN],
558         const struct ieee80211_scanparams *sp, int rssi)
559 {
560
561         printf("[%s] %s%s on chan %u (bss chan %u) ",
562             ether_sprintf(mac), isnew ? "new " : "",
563             ieee80211_mgt_subtype_name(subtype), sp->chan, sp->bchan);
564         ieee80211_print_essid(sp->ssid + 2, sp->ssid[1]);
565         printf(" rssi %d\n", rssi);
566
567         if (isnew) {
568                 printf("[%s] caps 0x%x bintval %u erp 0x%x", 
569                         ether_sprintf(mac), sp->capinfo, sp->bintval, sp->erp);
570                 if (sp->country != NULL)
571                         dump_country(sp->country);
572                 printf("\n");
573         }
574 }
575 #endif /* IEEE80211_DEBUG */
576
577 /*
578  * Process a beacon or probe response frame.
579  */
580 void
581 ieee80211_add_scan(struct ieee80211vap *vap,
582         struct ieee80211_channel *curchan,
583         const struct ieee80211_scanparams *sp,
584         const struct ieee80211_frame *wh,
585         int subtype, int rssi, int noise)
586 {
587         struct ieee80211com *ic = vap->iv_ic;
588
589         return (ic->ic_scan_methods->sc_add_scan(vap, curchan, sp, wh, subtype,
590             rssi, noise));
591 }
592
593 /*
594  * Timeout/age scan cache entries; called from sta timeout
595  * timer (XXX should be self-contained).
596  */
597 void
598 ieee80211_scan_timeout(struct ieee80211com *ic)
599 {
600         struct ieee80211_scan_state *ss = ic->ic_scan;
601
602         if (ss->ss_ops != NULL)
603                 ss->ss_ops->scan_age(ss);
604 }
605
606 /*
607  * Mark a scan cache entry after a successful associate.
608  */
609 void
610 ieee80211_scan_assoc_success(struct ieee80211vap *vap, const uint8_t mac[])
611 {
612         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
613
614         if (ss->ss_ops != NULL) {
615                 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN,
616                         mac, "%s",  __func__);
617                 ss->ss_ops->scan_assoc_success(ss, mac);
618         }
619 }
620
621 /*
622  * Demerit a scan cache entry after failing to associate.
623  */
624 void
625 ieee80211_scan_assoc_fail(struct ieee80211vap *vap,
626         const uint8_t mac[], int reason)
627 {
628         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
629
630         if (ss->ss_ops != NULL) {
631                 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac,
632                         "%s: reason %u", __func__, reason);
633                 ss->ss_ops->scan_assoc_fail(ss, mac, reason);
634         }
635 }
636
637 /*
638  * Iterate over the contents of the scan cache.
639  */
640 void
641 ieee80211_scan_iterate(struct ieee80211vap *vap,
642         ieee80211_scan_iter_func *f, void *arg)
643 {
644         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
645
646         if (ss->ss_ops != NULL)
647                 ss->ss_ops->scan_iterate(ss, f, arg);
648 }
649
650 /*
651  * Flush the contents of the scan cache.
652  */
653 void
654 ieee80211_scan_flush(struct ieee80211vap *vap)
655 {
656         struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan;
657
658         if (ss->ss_ops != NULL && ss->ss_vap == vap) {
659                 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n",  __func__);
660                 ss->ss_ops->scan_flush(ss);
661         }
662 }
663
664 /*
665  * Check the scan cache for an ap/channel to use; if that
666  * fails then kick off a new scan.
667  */
668 struct ieee80211_channel *
669 ieee80211_scan_pickchannel(struct ieee80211com *ic, int flags)
670 {
671         struct ieee80211_scan_state *ss = ic->ic_scan;
672
673         IEEE80211_LOCK_ASSERT(ic);
674
675         if (ss == NULL || ss->ss_ops == NULL || ss->ss_vap == NULL) {
676                 /* XXX printf? */
677                 return NULL;
678         }
679         if (ss->ss_ops->scan_pickchan == NULL) {
680                 IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN,
681                     "%s: scan module does not support picking a channel, "
682                     "opmode %s\n", __func__, ss->ss_vap->iv_opmode);
683                 return NULL;
684         }
685         return ss->ss_ops->scan_pickchan(ss, flags);
686 }