2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
5 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
6 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * a) Redistributions of source code must retain the above copyright notice,
12 * this list of conditions and the following disclaimer.
14 * b) Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the distribution.
18 * c) Neither the name of Cisco Systems, Inc. nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
24 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
35 #include <sys/cdefs.h>
36 __FBSDID("$FreeBSD$");
38 #ifndef _NETINET_SCTP_H_
39 #define _NETINET_SCTP_H_
42 #include <sys/types.h>
45 #define SCTP_PACKED __attribute__((packed))
48 * SCTP protocol - RFC4960.
51 uint16_t src_port; /* source port */
52 uint16_t dest_port; /* destination port */
53 uint32_t v_tag; /* verification tag of packet */
54 uint32_t checksum; /* CRC32C checksum */
55 /* chunks follow... */
61 struct sctp_chunkhdr {
62 uint8_t chunk_type; /* chunk type */
63 uint8_t chunk_flags; /* chunk flags */
64 uint16_t chunk_length; /* chunk length */
65 /* optional params follow */
69 * SCTP chunk parameters
71 struct sctp_paramhdr {
72 uint16_t param_type; /* parameter type */
73 uint16_t param_length; /* parameter length */
77 * user socket options: socket API defined
82 #define SCTP_RTOINFO 0x00000001
83 #define SCTP_ASSOCINFO 0x00000002
84 #define SCTP_INITMSG 0x00000003
85 #define SCTP_NODELAY 0x00000004
86 #define SCTP_AUTOCLOSE 0x00000005
87 #define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006
88 #define SCTP_PRIMARY_ADDR 0x00000007
89 #define SCTP_ADAPTATION_LAYER 0x00000008
91 #define SCTP_ADAPTION_LAYER 0x00000008
92 #define SCTP_DISABLE_FRAGMENTS 0x00000009
93 #define SCTP_PEER_ADDR_PARAMS 0x0000000a
94 #define SCTP_DEFAULT_SEND_PARAM 0x0000000b
95 /* ancillary data/notification interest options */
96 #define SCTP_EVENTS 0x0000000c /* deprecated */
97 /* Without this applied we will give V4 and V6 addresses on a V6 socket */
98 #define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d
99 #define SCTP_MAXSEG 0x0000000e
100 #define SCTP_DELAYED_SACK 0x0000000f
101 #define SCTP_FRAGMENT_INTERLEAVE 0x00000010
102 #define SCTP_PARTIAL_DELIVERY_POINT 0x00000011
103 /* authentication support */
104 #define SCTP_AUTH_CHUNK 0x00000012
105 #define SCTP_AUTH_KEY 0x00000013
106 #define SCTP_HMAC_IDENT 0x00000014
107 #define SCTP_AUTH_ACTIVE_KEY 0x00000015
108 #define SCTP_AUTH_DELETE_KEY 0x00000016
109 #define SCTP_USE_EXT_RCVINFO 0x00000017
110 #define SCTP_AUTO_ASCONF 0x00000018 /* rw */
111 #define SCTP_MAXBURST 0x00000019 /* rw */
112 #define SCTP_MAX_BURST 0x00000019 /* rw */
113 /* assoc level context */
114 #define SCTP_CONTEXT 0x0000001a /* rw */
115 /* explicit EOR signalling */
116 #define SCTP_EXPLICIT_EOR 0x0000001b
117 #define SCTP_REUSE_PORT 0x0000001c /* rw */
118 #define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d
119 #define SCTP_EVENT 0x0000001e
120 #define SCTP_RECVRCVINFO 0x0000001f
121 #define SCTP_RECVNXTINFO 0x00000020
122 #define SCTP_DEFAULT_SNDINFO 0x00000021
123 #define SCTP_DEFAULT_PRINFO 0x00000022
124 #define SCTP_PEER_ADDR_THLDS 0x00000023
125 #define SCTP_REMOTE_UDP_ENCAPS_PORT 0x00000024
126 #define SCTP_ECN_SUPPORTED 0x00000025
127 #define SCTP_PR_SUPPORTED 0x00000026
128 #define SCTP_AUTH_SUPPORTED 0x00000027
129 #define SCTP_ASCONF_SUPPORTED 0x00000028
130 #define SCTP_RECONFIG_SUPPORTED 0x00000029
131 #define SCTP_NRSACK_SUPPORTED 0x00000030
132 #define SCTP_PKTDROP_SUPPORTED 0x00000031
133 #define SCTP_MAX_CWND 0x00000032
138 #define SCTP_STATUS 0x00000100
139 #define SCTP_GET_PEER_ADDR_INFO 0x00000101
140 /* authentication support */
141 #define SCTP_PEER_AUTH_CHUNKS 0x00000102
142 #define SCTP_LOCAL_AUTH_CHUNKS 0x00000103
143 #define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */
144 #define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */
145 #define SCTP_TIMEOUTS 0x00000106
146 #define SCTP_PR_STREAM_STATUS 0x00000107
147 #define SCTP_PR_ASSOC_STATUS 0x00000108
150 * user socket options: BSD implementation specific
153 * Blocking I/O is enabled on any TCP type socket by default. For the UDP
154 * model if this is turned on then the socket buffer is shared for send
155 * resources amongst all associations. The default for the UDP model is that
156 * is SS_NBIO is set. Which means all associations have a separate send
157 * limit BUT they will NOT ever BLOCK instead you will get an error back
158 * EAGAIN if you try to send too much. If you want the blocking semantics you
159 * set this option at the cost of sharing one socket send buffer size amongst
160 * all associations. Peeled off sockets turn this option off and block. But
161 * since both TCP and peeled off sockets have only one assoc per socket this
162 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP
163 * model OR peeled off UDP model, but we do allow you to do so. You just use
164 * the normal syscall to toggle SS_NBIO the way you want.
166 * Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state
170 #define SCTP_ENABLE_STREAM_RESET 0x00000900 /* struct
171 * sctp_assoc_value */
172 #define SCTP_RESET_STREAMS 0x00000901 /* struct
173 * sctp_reset_streams */
174 #define SCTP_RESET_ASSOC 0x00000902 /* sctp_assoc_t */
175 #define SCTP_ADD_STREAMS 0x00000903 /* struct
176 * sctp_add_streams */
178 /* For enable stream reset */
179 #define SCTP_ENABLE_RESET_STREAM_REQ 0x00000001
180 #define SCTP_ENABLE_RESET_ASSOC_REQ 0x00000002
181 #define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x00000004
182 #define SCTP_ENABLE_VALUE_MASK 0x00000007
183 /* For reset streams */
184 #define SCTP_STREAM_RESET_INCOMING 0x00000001
185 #define SCTP_STREAM_RESET_OUTGOING 0x00000002
188 /* here on down are more implementation specific */
189 #define SCTP_SET_DEBUG_LEVEL 0x00001005
190 #define SCTP_CLR_STAT_LOG 0x00001007
191 /* CMT ON/OFF socket option */
192 #define SCTP_CMT_ON_OFF 0x00001200
193 #define SCTP_CMT_USE_DAC 0x00001201
194 /* JRS - Pluggable Congestion Control Socket option */
195 #define SCTP_PLUGGABLE_CC 0x00001202
196 /* RS - Pluggable Stream Scheduling Socket option */
197 #define SCTP_PLUGGABLE_SS 0x00001203
198 #define SCTP_SS_VALUE 0x00001204
199 #define SCTP_CC_OPTION 0x00001205 /* Options for CC
202 #define SCTP_INTERLEAVING_SUPPORTED 0x00001206
205 #define SCTP_GET_SNDBUF_USE 0x00001101
206 #define SCTP_GET_STAT_LOG 0x00001103
207 #define SCTP_PCB_STATUS 0x00001104
208 #define SCTP_GET_NONCE_VALUES 0x00001105
211 /* Special hook for dynamically setting primary for all assoc's,
212 * this is a write only option that requires root privilege.
214 #define SCTP_SET_DYNAMIC_PRIMARY 0x00002001
216 /* VRF (virtual router feature) and multi-VRF support
217 * options. VRF's provide splits within a router
218 * that give the views of multiple routers. A
219 * standard host, without VRF support, is just
220 * a single VRF. If VRF's are supported then
221 * the transport must be VRF aware. This means
222 * that every socket call coming in must be directed
223 * within the endpoint to one of the VRF's it belongs
224 * to. The endpoint, before binding, may select
225 * the "default" VRF it is in by using a set socket
226 * option with SCTP_VRF_ID. This will also
227 * get propagated to the default VRF. Once the
228 * endpoint binds an address then it CANNOT add
229 * additional VRF's to become a Multi-VRF endpoint.
231 * Before BINDING additional VRF's can be added with
232 * the SCTP_ADD_VRF_ID call or deleted with
235 * Associations are ALWAYS contained inside a single
236 * VRF. They cannot reside in two (or more) VRF's. Incoming
237 * packets, assuming the router is VRF aware, can always
238 * tell us what VRF they arrived on. A host not supporting
239 * any VRF's will find that the packets always arrived on the
240 * single VRF that the host has.
244 #define SCTP_VRF_ID 0x00003001
245 #define SCTP_ADD_VRF_ID 0x00003002
246 #define SCTP_GET_VRF_IDS 0x00003003
247 #define SCTP_GET_ASOC_VRF 0x00003004
248 #define SCTP_DEL_VRF_ID 0x00003005
251 * If you enable packet logging you can get
252 * a poor mans ethereal output in binary
253 * form. Note this is a compile option to
254 * the kernel, SCTP_PACKET_LOGGING, and
255 * without it in your kernel you
256 * will get a EOPNOTSUPP
258 #define SCTP_GET_PACKET_LOG 0x00004001
261 * hidden implementation specific options these are NOT user visible (should
262 * move out of sctp.h)
264 /* sctp_bindx() flags as hidden socket options */
265 #define SCTP_BINDX_ADD_ADDR 0x00008001
266 #define SCTP_BINDX_REM_ADDR 0x00008002
267 /* Hidden socket option that gets the addresses */
268 #define SCTP_GET_PEER_ADDRESSES 0x00008003
269 #define SCTP_GET_LOCAL_ADDRESSES 0x00008004
270 /* return the total count in bytes needed to hold all local addresses bound */
271 #define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005
272 /* Return the total count in bytes needed to hold the remote address */
273 #define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006
274 /* hidden option for connectx */
275 #define SCTP_CONNECT_X 0x00008007
276 /* hidden option for connectx_delayed, part of sendx */
277 #define SCTP_CONNECT_X_DELAYED 0x00008008
278 #define SCTP_CONNECT_X_COMPLETE 0x00008009
279 /* hidden socket option based sctp_peeloff */
280 #define SCTP_PEELOFF 0x0000800a
281 /* the real worker for sctp_getaddrlen() */
282 #define SCTP_GET_ADDR_LEN 0x0000800b
283 /* Debug things that need to be purged */
284 #define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00
286 /* JRS - Supported congestion control modules for pluggable
289 /* Standard TCP Congestion Control */
290 #define SCTP_CC_RFC2581 0x00000000
291 /* High Speed TCP Congestion Control (Floyd) */
292 #define SCTP_CC_HSTCP 0x00000001
293 /* HTCP Congestion Control */
294 #define SCTP_CC_HTCP 0x00000002
295 /* RTCC Congestion Control - RFC2581 plus */
296 #define SCTP_CC_RTCC 0x00000003
298 #define SCTP_CC_OPT_RTCC_SETMODE 0x00002000
299 #define SCTP_CC_OPT_USE_DCCC_ECN 0x00002001
300 #define SCTP_CC_OPT_STEADY_STEP 0x00002002
302 #define SCTP_CMT_OFF 0
303 #define SCTP_CMT_BASE 1
304 #define SCTP_CMT_RPV1 2
305 #define SCTP_CMT_RPV2 3
306 #define SCTP_CMT_MPTCP 4
307 #define SCTP_CMT_MAX SCTP_CMT_MPTCP
309 /* RS - Supported stream scheduling modules for pluggable
312 /* Default simple round-robin */
313 #define SCTP_SS_DEFAULT 0x00000000
314 /* Real round-robin */
315 #define SCTP_SS_ROUND_ROBIN 0x00000001
316 /* Real round-robin per packet */
317 #define SCTP_SS_ROUND_ROBIN_PACKET 0x00000002
319 #define SCTP_SS_PRIORITY 0x00000003
321 #define SCTP_SS_FAIR_BANDWITH 0x00000004
322 /* First-come, first-serve */
323 #define SCTP_SS_FIRST_COME 0x00000005
326 /* fragment interleave constants
327 * setting must be one of these or
330 #define SCTP_FRAG_LEVEL_0 0x00000000
331 #define SCTP_FRAG_LEVEL_1 0x00000001
332 #define SCTP_FRAG_LEVEL_2 0x00000002
337 #define SCTP_CLOSED 0x0000
338 #define SCTP_BOUND 0x1000
339 #define SCTP_LISTEN 0x2000
340 #define SCTP_COOKIE_WAIT 0x0002
341 #define SCTP_COOKIE_ECHOED 0x0004
342 #define SCTP_ESTABLISHED 0x0008
343 #define SCTP_SHUTDOWN_SENT 0x0010
344 #define SCTP_SHUTDOWN_RECEIVED 0x0020
345 #define SCTP_SHUTDOWN_ACK_SENT 0x0040
346 #define SCTP_SHUTDOWN_PENDING 0x0080
349 * SCTP operational error codes (user visible)
351 #define SCTP_CAUSE_NO_ERROR 0x0000
352 #define SCTP_CAUSE_INVALID_STREAM 0x0001
353 #define SCTP_CAUSE_MISSING_PARAM 0x0002
354 #define SCTP_CAUSE_STALE_COOKIE 0x0003
355 #define SCTP_CAUSE_OUT_OF_RESC 0x0004
356 #define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005
357 #define SCTP_CAUSE_UNRECOG_CHUNK 0x0006
358 #define SCTP_CAUSE_INVALID_PARAM 0x0007
359 #define SCTP_CAUSE_UNRECOG_PARAM 0x0008
360 #define SCTP_CAUSE_NO_USER_DATA 0x0009
361 #define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a
362 #define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b
363 #define SCTP_CAUSE_USER_INITIATED_ABT 0x000c
364 #define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d
366 /* Error causes from RFC5061 */
367 #define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0
368 #define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1
369 #define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2
370 #define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3
371 #define SCTP_CAUSE_REQUEST_REFUSED 0x00a4
373 /* Error causes from nat-draft */
374 #define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0
375 #define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1
377 /* Error causes from RFC4895 */
378 #define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105
381 * error cause parameters (user visible)
383 struct sctp_gen_error_cause {
389 struct sctp_error_cause {
392 /* optional cause-specific info may follow */
395 struct sctp_error_invalid_stream {
396 struct sctp_error_cause cause; /* code=SCTP_CAUSE_INVALID_STREAM */
397 uint16_t stream_id; /* stream id of the DATA in error */
401 struct sctp_error_missing_param {
402 struct sctp_error_cause cause; /* code=SCTP_CAUSE_MISSING_PARAM */
403 uint32_t num_missing_params; /* number of missing parameters */
407 struct sctp_error_stale_cookie {
408 struct sctp_error_cause cause; /* code=SCTP_CAUSE_STALE_COOKIE */
409 uint32_t stale_time; /* time in usec of staleness */
412 struct sctp_error_out_of_resource {
413 struct sctp_error_cause cause; /* code=SCTP_CAUSE_OUT_OF_RESOURCES */
416 struct sctp_error_unresolv_addr {
417 struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNRESOLVABLE_ADDR */
420 struct sctp_error_unrecognized_chunk {
421 struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNRECOG_CHUNK */
422 struct sctp_chunkhdr ch; /* header from chunk in error */
425 struct sctp_error_no_user_data {
426 struct sctp_error_cause cause; /* code=SCTP_CAUSE_NO_USER_DATA */
427 uint32_t tsn; /* TSN of the empty data chunk */
430 struct sctp_error_auth_invalid_hmac {
431 struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNSUPPORTED_HMACID */
436 * Main SCTP chunk types we place these here so natd and f/w's in user land
439 /************0x00 series ***********/
440 #define SCTP_DATA 0x00
441 #define SCTP_INITIATION 0x01
442 #define SCTP_INITIATION_ACK 0x02
443 #define SCTP_SELECTIVE_ACK 0x03
444 #define SCTP_HEARTBEAT_REQUEST 0x04
445 #define SCTP_HEARTBEAT_ACK 0x05
446 #define SCTP_ABORT_ASSOCIATION 0x06
447 #define SCTP_SHUTDOWN 0x07
448 #define SCTP_SHUTDOWN_ACK 0x08
449 #define SCTP_OPERATION_ERROR 0x09
450 #define SCTP_COOKIE_ECHO 0x0a
451 #define SCTP_COOKIE_ACK 0x0b
452 #define SCTP_ECN_ECHO 0x0c
453 #define SCTP_ECN_CWR 0x0d
454 #define SCTP_SHUTDOWN_COMPLETE 0x0e
456 #define SCTP_AUTHENTICATION 0x0f
457 /* EY nr_sack chunk id*/
458 #define SCTP_NR_SELECTIVE_ACK 0x10
459 /************0x40 series ***********/
460 #define SCTP_IDATA 0x40
461 /************0x80 series ***********/
463 #define SCTP_ASCONF_ACK 0x80
464 /* draft-ietf-stewart-pktdrpsctp */
465 #define SCTP_PACKET_DROPPED 0x81
466 /* draft-ietf-stewart-strreset-xxx */
467 #define SCTP_STREAM_RESET 0x82
470 #define SCTP_PAD_CHUNK 0x84
471 /************0xc0 series ***********/
473 #define SCTP_FORWARD_CUM_TSN 0xc0
475 #define SCTP_ASCONF 0xc1
476 #define SCTP_IFORWARD_CUM_TSN 0xc2
478 /* ABORT and SHUTDOWN COMPLETE FLAG */
479 #define SCTP_HAD_NO_TCB 0x01
481 /* Packet dropped flags */
482 #define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB
483 #define SCTP_BADCRC 0x02
484 #define SCTP_PACKET_TRUNCATED 0x04
486 /* Flag for ECN -CWR */
487 #define SCTP_CWR_REDUCE_OVERRIDE 0x01
488 #define SCTP_CWR_IN_SAME_WINDOW 0x02
490 #define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite
492 #define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst
495 /* Data Chuck Specific Flags */
496 #define SCTP_DATA_FRAG_MASK 0x03
497 #define SCTP_DATA_MIDDLE_FRAG 0x00
498 #define SCTP_DATA_LAST_FRAG 0x01
499 #define SCTP_DATA_FIRST_FRAG 0x02
500 #define SCTP_DATA_NOT_FRAG 0x03
501 #define SCTP_DATA_UNORDERED 0x04
502 #define SCTP_DATA_SACK_IMMEDIATELY 0x08
503 /* ECN Nonce: SACK Chunk Specific Flags */
504 #define SCTP_SACK_NONCE_SUM 0x01
506 /* CMT DAC algorithm SACK flag */
507 #define SCTP_SACK_CMT_DAC 0x80
510 * PCB flags (in sctp_flags bitmask).
511 * Note the features and flags are meant
512 * for use by netstat.
514 #define SCTP_PCB_FLAGS_UDPTYPE 0x00000001
515 #define SCTP_PCB_FLAGS_TCPTYPE 0x00000002
516 #define SCTP_PCB_FLAGS_BOUNDALL 0x00000004
517 #define SCTP_PCB_FLAGS_ACCEPTING 0x00000008
518 #define SCTP_PCB_FLAGS_UNBOUND 0x00000010
519 #define SCTP_PCB_FLAGS_SND_ITERATOR_UP 0x00000020
520 #define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000
521 #define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000
522 #define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000
523 /* TCP model support */
525 #define SCTP_PCB_FLAGS_CONNECTED 0x00200000
526 #define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000
527 #define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000
528 #define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000
529 #define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000
530 #define SCTP_PCB_FLAGS_BOUND_V6 0x04000000
531 #define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000
532 #define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000
533 #define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000
534 #define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000
536 /* flags to copy to new PCB */
537 #define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\
538 SCTP_PCB_FLAGS_WAKEINPUT|\
539 SCTP_PCB_FLAGS_BOUND_V6)
542 * PCB Features (in sctp_features bitmask)
544 #define SCTP_PCB_FLAGS_DO_NOT_PMTUD 0x0000000000000001
545 #define SCTP_PCB_FLAGS_EXT_RCVINFO 0x0000000000000002 /* deprecated */
546 #define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x0000000000000004
547 #define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x0000000000000008
548 #define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x0000000000000010
549 #define SCTP_PCB_FLAGS_DO_ASCONF 0x0000000000000020
550 #define SCTP_PCB_FLAGS_AUTO_ASCONF 0x0000000000000040
552 #define SCTP_PCB_FLAGS_NODELAY 0x0000000000000100
553 #define SCTP_PCB_FLAGS_AUTOCLOSE 0x0000000000000200
554 #define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x0000000000000400 /* deprecated */
555 #define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x0000000000000800
556 #define SCTP_PCB_FLAGS_RECVPADDREVNT 0x0000000000001000
557 #define SCTP_PCB_FLAGS_RECVPEERERR 0x0000000000002000
558 #define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x0000000000004000 /* deprecated */
559 #define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x0000000000008000
560 #define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x0000000000010000
561 #define SCTP_PCB_FLAGS_PDAPIEVNT 0x0000000000020000
562 #define SCTP_PCB_FLAGS_AUTHEVNT 0x0000000000040000
563 #define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x0000000000080000
564 #define SCTP_PCB_FLAGS_NO_FRAGMENT 0x0000000000100000
565 #define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x0000000000400000
566 #define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x0000000000800000
567 #define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x0000000001000000
568 #define SCTP_PCB_FLAGS_PORTREUSE 0x0000000002000000
569 #define SCTP_PCB_FLAGS_DRYEVNT 0x0000000004000000
570 #define SCTP_PCB_FLAGS_RECVRCVINFO 0x0000000008000000
571 #define SCTP_PCB_FLAGS_RECVNXTINFO 0x0000000010000000
572 #define SCTP_PCB_FLAGS_ASSOC_RESETEVNT 0x0000000020000000
573 #define SCTP_PCB_FLAGS_STREAM_CHANGEEVNT 0x0000000040000000
574 #define SCTP_PCB_FLAGS_RECVNSENDFAILEVNT 0x0000000080000000
577 * mobility_features parameters (by micchie).Note
578 * these features are applied against the
579 * sctp_mobility_features flags.. not the sctp_features
582 #define SCTP_MOBILITY_BASE 0x00000001
583 #define SCTP_MOBILITY_FASTHANDOFF 0x00000002
584 #define SCTP_MOBILITY_PRIM_DELETED 0x00000004
587 /* Smallest PMTU allowed when disabling PMTU discovery */
588 #define SCTP_SMALLEST_PMTU 512
589 /* Largest PMTU allowed when disabling PMTU discovery */
590 #define SCTP_LARGEST_PMTU 65536
594 #include <netinet/sctp_uio.h>
596 /* This dictates the size of the packet
597 * collection buffer. This only applies
598 * if SCTP_PACKET_LOGGING is enabled in
601 #define SCTP_PACKET_LOG_SIZE 65536
603 /* Maximum delays and such a user can set for options that
606 #define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */
607 #define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */
608 #define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */
611 /* Types of logging/KTR tracing that can be enabled via the
612 * sysctl net.inet.sctp.sctp_logging. You must also enable
614 * Note that you must have the SCTP option in the kernel
615 * to enable these as well.
617 #define SCTP_BLK_LOGGING_ENABLE 0x00000001
618 #define SCTP_CWND_MONITOR_ENABLE 0x00000002
619 #define SCTP_CWND_LOGGING_ENABLE 0x00000004
620 #define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020
621 #define SCTP_FR_LOGGING_ENABLE 0x00000040
622 #define SCTP_LOCK_LOGGING_ENABLE 0x00000080
623 #define SCTP_MAP_LOGGING_ENABLE 0x00000100
624 #define SCTP_MBCNT_LOGGING_ENABLE 0x00000200
625 #define SCTP_MBUF_LOGGING_ENABLE 0x00000400
626 #define SCTP_NAGLE_LOGGING_ENABLE 0x00000800
627 #define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000
628 #define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000
629 #define SCTP_SACK_LOGGING_ENABLE 0x00004000
630 #define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000
631 #define SCTP_SB_LOGGING_ENABLE 0x00010000
632 #define SCTP_STR_LOGGING_ENABLE 0x00020000
633 #define SCTP_WAKE_LOGGING_ENABLE 0x00040000
634 #define SCTP_LOG_MAXBURST_ENABLE 0x00080000
635 #define SCTP_LOG_RWND_ENABLE 0x00100000
636 #define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000
637 #define SCTP_LTRACE_CHUNK_ENABLE 0x00400000
638 #define SCTP_LTRACE_ERROR_ENABLE 0x00800000
639 #define SCTP_LAST_PACKET_TRACING 0x01000000
640 #define SCTP_THRESHOLD_LOGGING 0x02000000
641 #define SCTP_LOG_AT_SEND_2_SCTP 0x04000000
642 #define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000
643 #define SCTP_LOG_TRY_ADVANCE 0x10000000
645 #endif /* !_NETINET_SCTP_H_ */