2 * Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
7 * a) Redistributions of source code must retain the above copyright notice,
8 * this list of conditions and the following disclaimer.
10 * b) Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in
12 * the documentation and/or other materials provided with the distribution.
14 * c) Neither the name of Cisco Systems, Inc. nor the names of its
15 * contributors may be used to endorse or promote products derived
16 * from this software without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
20 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
28 * THE POSSIBILITY OF SUCH DAMAGE.
30 /* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
35 #ifndef _NETINET_SCTP_H_
36 #define _NETINET_SCTP_H_
38 #include <sys/types.h>
41 * SCTP protocol - RFC2960.
45 uint16_t src_port; /* source port */
46 uint16_t dest_port; /* destination port */
47 uint32_t v_tag; /* verification tag of packet */
48 uint32_t checksum; /* Adler32 C-Sum */
49 /* chunks follow... */
52 __attribute__((packed));
57 struct sctp_chunkhdr {
58 uint8_t chunk_type; /* chunk type */
59 uint8_t chunk_flags; /* chunk flags */
60 uint16_t chunk_length; /* chunk length */
61 /* optional params follow */
62 } __attribute__((packed));
65 * SCTP chunk parameters
67 struct sctp_paramhdr {
68 uint16_t param_type; /* parameter type */
69 uint16_t param_length; /* parameter length */
70 } __attribute__((packed));
73 * user socket options: socket API defined
78 #define SCTP_RTOINFO 0x00000001
79 #define SCTP_ASSOCINFO 0x00000002
80 #define SCTP_INITMSG 0x00000003
81 #define SCTP_NODELAY 0x00000004
82 #define SCTP_AUTOCLOSE 0x00000005
83 #define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006
84 #define SCTP_PRIMARY_ADDR 0x00000007
85 #define SCTP_ADAPTATION_LAYER 0x00000008
87 #define SCTP_ADAPTION_LAYER 0x00000008
88 #define SCTP_DISABLE_FRAGMENTS 0x00000009
89 #define SCTP_PEER_ADDR_PARAMS 0x0000000a
90 #define SCTP_DEFAULT_SEND_PARAM 0x0000000b
91 /* ancillary data/notification interest options */
92 #define SCTP_EVENTS 0x0000000c
93 /* Without this applied we will give V4 and V6 addresses on a V6 socket */
94 #define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d
95 #define SCTP_MAXSEG 0x0000000e
96 #define SCTP_DELAYED_SACK 0x0000000f
97 #define SCTP_FRAGMENT_INTERLEAVE 0x00000010
98 #define SCTP_PARTIAL_DELIVERY_POINT 0x00000011
99 /* authentication support */
100 #define SCTP_AUTH_CHUNK 0x00000012
101 #define SCTP_AUTH_KEY 0x00000013
102 #define SCTP_HMAC_IDENT 0x00000014
103 #define SCTP_AUTH_ACTIVE_KEY 0x00000015
104 #define SCTP_AUTH_DELETE_KEY 0x00000016
105 #define SCTP_USE_EXT_RCVINFO 0x00000017
106 #define SCTP_AUTO_ASCONF 0x00000018 /* rw */
107 #define SCTP_MAXBURST 0x00000019 /* rw */
108 #define SCTP_MAX_BURST 0x00000019 /* rw */
109 /* assoc level context */
110 #define SCTP_CONTEXT 0x0000001a /* rw */
111 /* explict EOR signalling */
112 #define SCTP_EXPLICIT_EOR 0x0000001b
117 #define SCTP_STATUS 0x00000100
118 #define SCTP_GET_PEER_ADDR_INFO 0x00000101
119 /* authentication support */
120 #define SCTP_PEER_AUTH_CHUNKS 0x00000102
121 #define SCTP_LOCAL_AUTH_CHUNKS 0x00000103
122 #define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */
123 #define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */
126 * user socket options: BSD implementation specific
129 * Blocking I/O is enabled on any TCP type socket by default. For the UDP
130 * model if this is turned on then the socket buffer is shared for send
131 * resources amongst all associations. The default for the UDP model is that
132 * is SS_NBIO is set. Which means all associations have a seperate send
133 * limit BUT they will NOT ever BLOCK instead you will get an error back
134 * EAGAIN if you try to send to much. If you want the blocking symantics you
135 * set this option at the cost of sharing one socket send buffer size amongst
136 * all associations. Peeled off sockets turn this option off and block. But
137 * since both TCP and peeled off sockets have only one assoc per socket this
138 * is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP
139 * model OR peeled off UDP model, but we do allow you to do so. You just use
140 * the normal syscall to toggle SS_NBIO the way you want.
142 * Blocking I/O is controled by the SS_NBIO flag on the socket state so_state
146 /* these should probably go into sockets API */
147 #define SCTP_RESET_STREAMS 0x00001004 /* wo */
150 /* here on down are more implementation specific */
151 #define SCTP_SET_DEBUG_LEVEL 0x00001005
152 #define SCTP_CLR_STAT_LOG 0x00001007
153 /* CMT ON/OFF socket option */
154 #define SCTP_CMT_ON_OFF 0x00001200
155 #define SCTP_CMT_USE_DAC 0x00001201
156 /* JRS - Pluggable Congestion Control Socket option */
157 #define SCTP_PLUGGABLE_CC 0x00001202
160 #define SCTP_GET_SNDBUF_USE 0x00001101
161 #define SCTP_GET_STAT_LOG 0x00001103
162 #define SCTP_PCB_STATUS 0x00001104
163 #define SCTP_GET_NONCE_VALUES 0x00001105
166 /* Special hook for dynamically setting primary for all assoc's,
167 * this is a write only option that requires root privledge.
169 #define SCTP_SET_DYNAMIC_PRIMARY 0x00002001
171 /* VRF (virtual router feature) and multi-VRF support
172 * options. VRF's provide splits within a router
173 * that give the views of multiple routers. A
174 * standard host, without VRF support, is just
175 * a single VRF. If VRF's are supported then
176 * the transport must be VRF aware. This means
177 * that every socket call coming in must be directed
178 * within the endpoint to one of the VRF's it belongs
179 * to. The endpoint, before binding, may select
180 * the "default" VRF it is in by using a set socket
181 * option with SCTP_VRF_ID. This will also
182 * get propegated to the default VRF. Once the
183 * endpoint binds an address then it CANNOT add
184 * additional VRF's to become a Multi-VRF endpoint.
186 * Before BINDING additional VRF's can be added with
187 * the SCTP_ADD_VRF_ID call or deleted with
190 * Associations are ALWAYS contained inside a single
191 * VRF. They cannot reside in two (or more) VRF's. Incoming
192 * packets, assuming the router is VRF aware, can always
193 * tell us what VRF they arrived on. A host not supporting
194 * any VRF's will find that the packets always arrived on the
195 * single VRF that the host has.
199 #define SCTP_VRF_ID 0x00003001
200 #define SCTP_ADD_VRF_ID 0x00003002
201 #define SCTP_GET_VRF_IDS 0x00003003
202 #define SCTP_GET_ASOC_VRF 0x00003004
203 #define SCTP_DEL_VRF_ID 0x00003005
206 * If you enable packet logging you can get
207 * a poor mans ethereal output in binary
208 * form. Note this is a compile option to
209 * the kernel, SCTP_PACKET_LOGGING, and
210 * without it in your kernel you
211 * will get a EOPNOTSUPP
213 #define SCTP_GET_PACKET_LOG 0x00004001
216 * hidden implementation specific options these are NOT user visible (should
217 * move out of sctp.h)
219 /* sctp_bindx() flags as hidden socket options */
220 #define SCTP_BINDX_ADD_ADDR 0x00008001
221 #define SCTP_BINDX_REM_ADDR 0x00008002
222 /* Hidden socket option that gets the addresses */
223 #define SCTP_GET_PEER_ADDRESSES 0x00008003
224 #define SCTP_GET_LOCAL_ADDRESSES 0x00008004
225 /* return the total count in bytes needed to hold all local addresses bound */
226 #define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005
227 /* Return the total count in bytes needed to hold the remote address */
228 #define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006
229 /* hidden option for connectx */
230 #define SCTP_CONNECT_X 0x00008007
231 /* hidden option for connectx_delayed, part of sendx */
232 #define SCTP_CONNECT_X_DELAYED 0x00008008
233 #define SCTP_CONNECT_X_COMPLETE 0x00008009
234 /* hidden socket option based sctp_peeloff */
235 #define SCTP_PEELOFF 0x0000800a
236 /* the real worker for sctp_getaddrlen() */
237 #define SCTP_GET_ADDR_LEN 0x0000800b
238 /* temporary workaround for Apple listen() issue, no args used */
239 #define SCTP_LISTEN_FIX 0x0000800c
240 /* Debug things that need to be purged */
241 #define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00
243 /* JRS - Supported congestion control modules for pluggable
246 /* Standard TCP Congestion Control */
247 #define SCTP_CC_RFC2581 0x00000000
248 /* High Speed TCP Congestion Control (Floyd) */
249 #define SCTP_CC_HSTCP 0x00000001
250 /* HTCP Congestion Control */
251 #define SCTP_CC_HTCP 0x00000002
254 /* fragment interleave constants
255 * setting must be one of these or
258 #define SCTP_FRAG_LEVEL_0 0x00000000
259 #define SCTP_FRAG_LEVEL_1 0x00000001
260 #define SCTP_FRAG_LEVEL_2 0x00000002
265 #define SCTP_CLOSED 0x0000
266 #define SCTP_BOUND 0x1000
267 #define SCTP_LISTEN 0x2000
268 #define SCTP_COOKIE_WAIT 0x0002
269 #define SCTP_COOKIE_ECHOED 0x0004
270 #define SCTP_ESTABLISHED 0x0008
271 #define SCTP_SHUTDOWN_SENT 0x0010
272 #define SCTP_SHUTDOWN_RECEIVED 0x0020
273 #define SCTP_SHUTDOWN_ACK_SENT 0x0040
274 #define SCTP_SHUTDOWN_PENDING 0x0080
277 * SCTP operational error codes (user visible)
279 #define SCTP_CAUSE_NO_ERROR 0x0000
280 #define SCTP_CAUSE_INVALID_STREAM 0x0001
281 #define SCTP_CAUSE_MISSING_PARAM 0x0002
282 #define SCTP_CAUSE_STALE_COOKIE 0x0003
283 #define SCTP_CAUSE_OUT_OF_RESC 0x0004
284 #define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005
285 #define SCTP_CAUSE_UNRECOG_CHUNK 0x0006
286 #define SCTP_CAUSE_INVALID_PARAM 0x0007
287 #define SCTP_CAUSE_UNRECOG_PARAM 0x0008
288 #define SCTP_CAUSE_NO_USER_DATA 0x0009
289 #define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a
290 #define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b
291 #define SCTP_CAUSE_USER_INITIATED_ABT 0x000c
292 #define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d
294 /* Error causes from draft-ietf-tsvwg-addip-sctp */
295 #define SCTP_CAUSE_DELETING_LAST_ADDR 0xa0
296 #define SCTP_CAUSE_RESOURCE_SHORTAGE 0xa1
297 #define SCTP_CAUSE_DELETING_SRC_ADDR 0xa2
298 #define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0xa3
299 #define SCTP_CAUSE_REQUEST_REFUSED 0xa4
301 /* Error causes from draft-ietf-tsvwg-sctp-auth */
302 #define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105
305 * error cause parameters (user visisble)
307 struct sctp_error_cause {
310 /* optional cause-specific info may follow */
311 } __attribute__((packed));
313 struct sctp_error_invalid_stream {
314 struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STRE
316 uint16_t stream_id; /* stream id of the DATA in error */
318 } __attribute__((packed));
320 struct sctp_error_missing_param {
321 struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARA
323 uint32_t num_missing_params; /* number of missing
325 /* uint16_t param_type's follow */
326 } __attribute__((packed));
328 struct sctp_error_stale_cookie {
329 struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE
331 uint32_t stale_time; /* time in usec of staleness */
332 } __attribute__((packed));
334 struct sctp_error_out_of_resource {
335 struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOU
337 } __attribute__((packed));
339 struct sctp_error_unresolv_addr {
340 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE
343 } __attribute__((packed));
345 struct sctp_error_unrecognized_chunk {
346 struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUN
348 struct sctp_chunkhdr ch; /* header from chunk in error */
349 } __attribute__((packed));
352 #define HAVE_KERNEL_SCTP 1
353 #define HAVE_SCTP_PRSCTP 1
354 #define HAVE_SCTP_ADDIP 1
355 #define HAVE_SCTP_CANSET_PRIMARY 1
356 #define HAVE_SCTP_SAT_CAPABILITY 1
357 #define HAVE_SCTP_MULTIBUF 1
358 #define HAVE_SCTP_NOCONNECT 0
359 #define HAVE_SCTP_ECN_NONCE 1 /* ECN Nonce option */
360 #define HAVE_SCTP_AUTH 1
361 #define HAVE_SCTP_EXT_RCVINFO 1
362 #define HAVE_SCTP_CONNECTX 1
364 * Main SCTP chunk types we place these here so natd and f/w's in user land
367 /************0x00 series ***********/
368 #define SCTP_DATA 0x00
369 #define SCTP_INITIATION 0x01
370 #define SCTP_INITIATION_ACK 0x02
371 #define SCTP_SELECTIVE_ACK 0x03
372 #define SCTP_HEARTBEAT_REQUEST 0x04
373 #define SCTP_HEARTBEAT_ACK 0x05
374 #define SCTP_ABORT_ASSOCIATION 0x06
375 #define SCTP_SHUTDOWN 0x07
376 #define SCTP_SHUTDOWN_ACK 0x08
377 #define SCTP_OPERATION_ERROR 0x09
378 #define SCTP_COOKIE_ECHO 0x0a
379 #define SCTP_COOKIE_ACK 0x0b
380 #define SCTP_ECN_ECHO 0x0c
381 #define SCTP_ECN_CWR 0x0d
382 #define SCTP_SHUTDOWN_COMPLETE 0x0e
383 /* draft-ietf-tsvwg-sctp-auth */
384 #define SCTP_AUTHENTICATION 0x0f
385 /************0x40 series ***********/
386 /************0x80 series ***********/
387 /* draft-ietf-tsvwg-addip-sctp */
388 #define SCTP_ASCONF_ACK 0x80
389 /* draft-ietf-stewart-pktdrpsctp */
390 #define SCTP_PACKET_DROPPED 0x81
391 /* draft-ietf-stewart-strreset-xxx */
392 #define SCTP_STREAM_RESET 0x82
395 #define SCTP_PAD_CHUNK 0x84
396 /************0xc0 series ***********/
398 #define SCTP_FORWARD_CUM_TSN 0xc0
399 /* draft-ietf-tsvwg-addip-sctp */
400 #define SCTP_ASCONF 0xc1
403 /* ABORT and SHUTDOWN COMPLETE FLAG */
404 #define SCTP_HAD_NO_TCB 0x01
406 /* Packet dropped flags */
407 #define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB
408 #define SCTP_BADCRC 0x02
409 #define SCTP_PACKET_TRUNCATED 0x04
411 #define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite
413 #define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst
416 /* Data Chuck Specific Flags */
417 #define SCTP_DATA_FRAG_MASK 0x03
418 #define SCTP_DATA_MIDDLE_FRAG 0x00
419 #define SCTP_DATA_LAST_FRAG 0x01
420 #define SCTP_DATA_FIRST_FRAG 0x02
421 #define SCTP_DATA_NOT_FRAG 0x03
422 #define SCTP_DATA_UNORDERED 0x04
424 /* ECN Nonce: SACK Chunk Specific Flags */
425 #define SCTP_SACK_NONCE_SUM 0x01
427 /* CMT DAC algorithm SACK flag */
428 #define SCTP_SACK_CMT_DAC 0x80
431 * PCB flags (in sctp_flags bitmask).
432 * Note the features and flags are meant
433 * for use by netstat.
435 #define SCTP_PCB_FLAGS_UDPTYPE 0x00000001
436 #define SCTP_PCB_FLAGS_TCPTYPE 0x00000002
437 #define SCTP_PCB_FLAGS_BOUNDALL 0x00000004
438 #define SCTP_PCB_FLAGS_ACCEPTING 0x00000008
439 #define SCTP_PCB_FLAGS_UNBOUND 0x00000010
440 #define SCTP_PCB_FLAGS_LISTENING 0x00000020
441 #define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000
442 #define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000
443 #define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000
444 /* TCP model support */
446 #define SCTP_PCB_FLAGS_CONNECTED 0x00200000
447 #define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000
448 #define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000
449 #define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000
450 #define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000
451 #define SCTP_PCB_FLAGS_BOUND_V6 0x04000000
452 #define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x08000000
453 #define SCTP_PCB_FLAGS_BLOCKING_IO 0x10000000
454 #define SCTP_PCB_FLAGS_SOCKET_GONE 0x20000000
455 #define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x40000000
456 /* flags to copy to new PCB */
457 #define SCTP_PCB_COPY_FLAGS 0x0e000004
461 * PCB Features (in sctp_features bitmask)
463 #define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002
464 #define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004
465 #define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008
466 #define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010
467 #define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020
468 #define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040
469 #define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080
472 #define SCTP_PCB_FLAGS_NODELAY 0x00000100
473 #define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200
474 #define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400
475 #define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800
476 #define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000
477 #define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000
478 #define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000
479 #define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000
480 #define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000
481 #define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000
482 #define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000
483 #define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000
484 #define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000
485 #define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000
487 #define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU
490 #include <netinet/sctp_uio.h>
492 /* This dictates the size of the packet
493 * collection buffer. This only applies
494 * if SCTP_PACKET_LOGGING is enabled in
497 #define SCTP_PACKET_LOG_SIZE 65536
499 /* Maximum delays and such a user can set for options that
502 #define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */
503 #define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */
504 #define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */
507 /* Types of logging/KTR tracing that can be enabled via the
508 * sysctl net.inet.sctp.sctp_logging. You must also enable
510 * Note that you must have the SCTP option in the kernel
511 * to enable these as well.
513 #define SCTP_BLK_LOGGING_ENABLE 0x00000001
514 #define SCTP_CWND_MONITOR_ENABLE 0x00000002
515 #define SCTP_CWND_LOGGING_ENABLE 0x00000004
516 #define SCTP_EARLYFR_LOGGING_ENABLE 0x00000010
517 #define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020
518 #define SCTP_FR_LOGGING_ENABLE 0x00000040
519 #define SCTP_LOCK_LOGGING_ENABLE 0x00000080
520 #define SCTP_MAP_LOGGING_ENABLE 0x00000100
521 #define SCTP_MBCNT_LOGGING_ENABLE 0x00000200
522 #define SCTP_MBUF_LOGGING_ENABLE 0x00000400
523 #define SCTP_NAGLE_LOGGING_ENABLE 0x00000800
524 #define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000
525 #define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000
526 #define SCTP_SACK_LOGGING_ENABLE 0x00004000
527 #define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000
528 #define SCTP_SB_LOGGING_ENABLE 0x00010000
529 #define SCTP_STR_LOGGING_ENABLE 0x00020000
530 #define SCTP_WAKE_LOGGING_ENABLE 0x00040000
531 #define SCTP_LOG_MAXBURST_ENABLE 0x00080000
532 #define SCTP_LOG_RWND_ENABLE 0x00100000
533 #define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000
534 #define SCTP_LTRACE_CHUNK_ENABLE 0x00400000
535 #define SCTP_LTRACE_ERROR_ENABLE 0x00800000
536 #define SCTP_LAST_PACKET_TRACING 0x01000000
538 #endif /* !_NETINET_SCTP_H_ */