]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/netinet/sctp_lock_bsd.h
zfs: merge openzfs/zfs@8e8acabdc
[FreeBSD/FreeBSD.git] / sys / netinet / sctp_lock_bsd.h
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
5  * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
6  * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * a) Redistributions of source code must retain the above copyright notice,
12  *   this list of conditions and the following disclaimer.
13  *
14  * b) Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in
16  *   the documentation and/or other materials provided with the distribution.
17  *
18  * c) Neither the name of Cisco Systems, Inc. nor the names of its
19  *    contributors may be used to endorse or promote products derived
20  *    from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
24  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 #include <sys/cdefs.h>
36 __FBSDID("$FreeBSD$");
37
38 #ifndef _NETINET_SCTP_LOCK_BSD_H_
39 #define _NETINET_SCTP_LOCK_BSD_H_
40
41 /*
42  * General locking concepts: The goal of our locking is to of course provide
43  * consistency and yet minimize overhead. We will attempt to use
44  * non-recursive locks which are supposed to be quite inexpensive. Now in
45  * order to do this the goal is that most functions are not aware of locking.
46  * Once we have a TCB we lock it and unlock when we are through. This means
47  * that the TCB lock is kind-of a "global" lock when working on an
48  * association. Caution must be used when asserting a TCB_LOCK since if we
49  * recurse we deadlock.
50  *
51  * Most other locks (INP and INFO) attempt to localize the locking i.e. we try
52  * to contain the lock and unlock within the function that needs to lock it.
53  * This sometimes mean we do extra locks and unlocks and lose a bit of
54  * efficiency, but if the performance statements about non-recursive locks are
55  * true this should not be a problem.  One issue that arises with this only
56  * lock when needed is that if an implicit association setup is done we have
57  * a problem. If at the time I lookup an association I have NULL in the tcb
58  * return, by the time I call to create the association some other processor
59  * could have created it. This is what the CREATE lock on the endpoint.
60  * Places where we will be implicitly creating the association OR just
61  * creating an association (the connect call) will assert the CREATE_INP
62  * lock. This will assure us that during all the lookup of INP and INFO if
63  * another creator is also locking/looking up we can gate the two to
64  * synchronize. So the CREATE_INP lock is also another one we must use
65  * extreme caution in locking to make sure we don't hit a re-entrancy issue.
66  *
67  */
68
69 /*
70  * When working with the global SCTP lists we lock and unlock the INP_INFO
71  * lock. So when we go to lookup an association we will want to do a
72  * SCTP_INP_INFO_RLOCK() and then when we want to add a new association to
73  * the SCTP_BASE_INFO() list's we will do a SCTP_INP_INFO_WLOCK().
74  */
75
76 #define SCTP_IPI_COUNT_INIT()
77
78 #define SCTP_STATLOG_INIT_LOCK()
79 #define SCTP_STATLOG_DESTROY()
80 #define SCTP_STATLOG_LOCK()
81 #define SCTP_STATLOG_UNLOCK()
82
83 #define SCTP_INP_INFO_LOCK_INIT() do {                                  \
84         rw_init(&SCTP_BASE_INFO(ipi_ep_mtx), "sctp-info");              \
85 } while (0)
86
87 #define SCTP_INP_INFO_LOCK_DESTROY() do {                               \
88         if (rw_wowned(&SCTP_BASE_INFO(ipi_ep_mtx))) {                   \
89                 rw_wunlock(&SCTP_BASE_INFO(ipi_ep_mtx));                \
90         }                                                               \
91         rw_destroy(&SCTP_BASE_INFO(ipi_ep_mtx));                        \
92 } while (0)
93
94 #define SCTP_INP_INFO_RLOCK() do {                                      \
95         rw_rlock(&SCTP_BASE_INFO(ipi_ep_mtx));                          \
96 } while (0)
97
98 #define SCTP_INP_INFO_WLOCK() do {                                      \
99         rw_wlock(&SCTP_BASE_INFO(ipi_ep_mtx));                          \
100 } while (0)
101
102 #define SCTP_INP_INFO_RUNLOCK() do {                                    \
103         rw_runlock(&SCTP_BASE_INFO(ipi_ep_mtx));                        \
104 } while (0)
105
106 #define SCTP_INP_INFO_WUNLOCK() do {                                    \
107         rw_wunlock(&SCTP_BASE_INFO(ipi_ep_mtx));                        \
108 } while (0)
109
110 #define SCTP_INP_INFO_LOCK_ASSERT() do {                                \
111         rw_assert(&SCTP_BASE_INFO(ipi_ep_mtx), RA_LOCKED);              \
112 } while (0)
113
114 #define SCTP_INP_INFO_RLOCK_ASSERT() do {                               \
115         rw_assert(&SCTP_BASE_INFO(ipi_ep_mtx), RA_RLOCKED);             \
116 } while (0)
117
118 #define SCTP_INP_INFO_WLOCK_ASSERT() do {                               \
119         rw_assert(&SCTP_BASE_INFO(ipi_ep_mtx), RA_WLOCKED);             \
120 } while (0)
121
122 #define SCTP_MCORE_QLOCK_INIT(cpstr) do {                               \
123         mtx_init(&(cpstr)->que_mtx, "sctp-mcore_queue","queue_lock",    \
124                  MTX_DEF | MTX_DUPOK);                                  \
125 } while (0)
126
127 #define SCTP_MCORE_QDESTROY(cpstr) do {                                 \
128         if (mtx_owned(&(cpstr)->core_mtx)) {                            \
129                 mtx_unlock(&(cpstr)->que_mtx);                          \
130         }                                                               \
131         mtx_destroy(&(cpstr)->que_mtx);                                 \
132 } while (0)
133
134 #define SCTP_MCORE_QLOCK(cpstr) do {                                    \
135         mtx_lock(&(cpstr)->que_mtx);                                    \
136 } while (0)
137
138 #define SCTP_MCORE_QUNLOCK(cpstr) do {                                  \
139         mtx_unlock(&(cpstr)->que_mtx);                                  \
140 } while (0)
141
142 #define SCTP_MCORE_LOCK_INIT(cpstr) do {                                \
143         mtx_init(&(cpstr)->core_mtx, "sctp-cpulck","cpu_proc_lock",     \
144                  MTX_DEF | MTX_DUPOK);                                  \
145 } while (0)
146
147 #define SCTP_MCORE_DESTROY(cpstr) do {                                  \
148         if (mtx_owned(&(cpstr)->core_mtx)) {                            \
149                 mtx_unlock(&(cpstr)->core_mtx);                         \
150         }                                                               \
151         mtx_destroy(&(cpstr)->core_mtx);                                \
152 } while (0)
153
154 #define SCTP_MCORE_LOCK(cpstr) do {                                     \
155         mtx_lock(&(cpstr)->core_mtx);                                   \
156 } while (0)
157
158 #define SCTP_MCORE_UNLOCK(cpstr) do {                                   \
159         mtx_unlock(&(cpstr)->core_mtx);                                 \
160 } while (0)
161
162 #define SCTP_IPI_ADDR_INIT() do {                                       \
163         rw_init(&SCTP_BASE_INFO(ipi_addr_mtx), "sctp-addr");            \
164 } while (0)
165
166 #define SCTP_IPI_ADDR_DESTROY() do {                                    \
167         if (rw_wowned(&SCTP_BASE_INFO(ipi_addr_mtx))) {                 \
168                 rw_wunlock(&SCTP_BASE_INFO(ipi_addr_mtx));              \
169         }                                                               \
170         rw_destroy(&SCTP_BASE_INFO(ipi_addr_mtx));                      \
171 } while (0)
172
173 #define SCTP_IPI_ADDR_RLOCK()   do {                                    \
174         rw_rlock(&SCTP_BASE_INFO(ipi_addr_mtx));                        \
175 } while (0)
176
177 #define SCTP_IPI_ADDR_WLOCK()   do {                                    \
178         rw_wlock(&SCTP_BASE_INFO(ipi_addr_mtx));                        \
179 } while (0)
180
181 #define SCTP_IPI_ADDR_RUNLOCK() do {                                    \
182         rw_runlock(&SCTP_BASE_INFO(ipi_addr_mtx));                      \
183 } while (0)
184
185 #define SCTP_IPI_ADDR_WUNLOCK() do {                                    \
186         rw_wunlock(&SCTP_BASE_INFO(ipi_addr_mtx));                      \
187 } while (0)
188
189 #define SCTP_IPI_ADDR_LOCK_ASSERT() do {                                \
190         rw_assert(&SCTP_BASE_INFO(ipi_addr_mtx), RA_LOCKED);            \
191 } while (0)
192
193 #define SCTP_IPI_ADDR_WLOCK_ASSERT() do {                               \
194         rw_assert(&SCTP_BASE_INFO(ipi_addr_mtx), RA_WLOCKED);           \
195 } while (0)
196
197 #define SCTP_IPI_ITERATOR_WQ_INIT() do {                                \
198         mtx_init(&sctp_it_ctl.ipi_iterator_wq_mtx, "sctp-it-wq",        \
199                  "sctp_it_wq", MTX_DEF);                                \
200 } while (0)
201
202 #define SCTP_IPI_ITERATOR_WQ_DESTROY() do {                             \
203         mtx_destroy(&sctp_it_ctl.ipi_iterator_wq_mtx);                  \
204 } while (0)
205
206 #define SCTP_IPI_ITERATOR_WQ_LOCK() do {                                \
207         mtx_lock(&sctp_it_ctl.ipi_iterator_wq_mtx);                     \
208 } while (0)
209
210 #define SCTP_IPI_ITERATOR_WQ_UNLOCK() do {                              \
211         mtx_unlock(&sctp_it_ctl.ipi_iterator_wq_mtx);                   \
212 } while (0)
213
214 #define SCTP_IP_PKTLOG_INIT() do {                                      \
215         mtx_init(&SCTP_BASE_INFO(ipi_pktlog_mtx), "sctp-pktlog",        \
216                  "packetlog", MTX_DEF);                                 \
217 } while (0)
218
219 #define SCTP_IP_PKTLOG_DESTROY() do {                                   \
220         mtx_destroy(&SCTP_BASE_INFO(ipi_pktlog_mtx));                   \
221 } while (0)
222
223 #define SCTP_IP_PKTLOG_LOCK()   do {                                    \
224         mtx_lock(&SCTP_BASE_INFO(ipi_pktlog_mtx));                      \
225 } while (0)
226
227 #define SCTP_IP_PKTLOG_UNLOCK() do {                                    \
228         mtx_unlock(&SCTP_BASE_INFO(ipi_pktlog_mtx));                    \
229 } while (0)
230
231 /*
232  * The INP locks we will use for locking an SCTP endpoint, so for example if
233  * we want to change something at the endpoint level for example random_store
234  * or cookie secrets we lock the INP level.
235  */
236
237 #define SCTP_INP_READ_INIT(_inp) do {                                   \
238         mtx_init(&(_inp)->inp_rdata_mtx, "sctp-read", "inpr",           \
239                  MTX_DEF | MTX_DUPOK);                                  \
240 } while (0)
241
242 #define SCTP_INP_READ_DESTROY(_inp) do {                                \
243         mtx_destroy(&(_inp)->inp_rdata_mtx);                            \
244 } while (0)
245
246 #define SCTP_INP_READ_LOCK(_inp) do {                                   \
247         mtx_lock(&(_inp)->inp_rdata_mtx);                               \
248 } while (0)
249
250 #define SCTP_INP_READ_UNLOCK(_inp) do {                                 \
251         mtx_unlock(&(_inp)->inp_rdata_mtx);                             \
252 } while (0)
253
254 #define SCTP_INP_LOCK_INIT(_inp) do {                                   \
255         mtx_init(&(_inp)->inp_mtx, "sctp-inp", "inp",                   \
256                  MTX_DEF | MTX_DUPOK);                                  \
257 } while (0)
258
259 #define SCTP_INP_LOCK_DESTROY(_inp) do {                                \
260         mtx_destroy(&(_inp)->inp_mtx);                                  \
261 } while (0)
262
263 #define SCTP_INP_LOCK_CONTENDED(_inp)                                   \
264         ((_inp)->inp_mtx.mtx_lock & MTX_CONTESTED)
265
266 #define SCTP_INP_READ_CONTENDED(_inp)                                   \
267         ((_inp)->inp_rdata_mtx.mtx_lock & MTX_CONTESTED)
268
269 #ifdef SCTP_LOCK_LOGGING
270 #define SCTP_INP_RLOCK(_inp)    do {                                    \
271         if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOCK_LOGGING_ENABLE) \
272                 sctp_log_lock(_inp, NULL, SCTP_LOG_LOCK_INP);           \
273         mtx_lock(&(_inp)->inp_mtx);                                     \
274 } while (0)
275
276 #define SCTP_INP_WLOCK(_inp)    do {                                    \
277         if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOCK_LOGGING_ENABLE) \
278                 sctp_log_lock(_inp, NULL, SCTP_LOG_LOCK_INP);           \
279         mtx_lock(&(_inp)->inp_mtx);                                     \
280 } while (0)
281 #else
282 #define SCTP_INP_RLOCK(_inp) do {                                       \
283         mtx_lock(&(_inp)->inp_mtx);                                     \
284 } while (0)
285
286 #define SCTP_INP_WLOCK(_inp) do {                                       \
287         mtx_lock(&(_inp)->inp_mtx);                                     \
288 } while (0)
289 #endif
290
291 #define SCTP_INP_RUNLOCK(_inp) do {                                     \
292         mtx_unlock(&(_inp)->inp_mtx);                                   \
293 } while (0)
294
295 #define SCTP_INP_WUNLOCK(_inp) do {                                     \
296         mtx_unlock(&(_inp)->inp_mtx);                                   \
297 } while (0)
298
299 #define SCTP_INP_RLOCK_ASSERT(_inp) do {                                \
300         KASSERT(mtx_owned(&(_inp)->inp_mtx),                            \
301                 ("Don't own INP read lock"));                           \
302 } while (0)
303
304 #define SCTP_INP_WLOCK_ASSERT(_inp) do {                                \
305         KASSERT(mtx_owned(&(_inp)->inp_mtx),                            \
306                 ("Don't own INP write lock"));                          \
307 } while (0)
308
309 #define SCTP_INP_INCR_REF(_inp) atomic_add_int(&((_inp)->refcount), 1)
310 #define SCTP_INP_DECR_REF(_inp) atomic_add_int(&((_inp)->refcount), -1)
311
312 #define SCTP_ASOC_CREATE_LOCK_INIT(_inp) do {                           \
313         mtx_init(&(_inp)->inp_create_mtx, "sctp-create", "inp_create",  \
314                  MTX_DEF | MTX_DUPOK);                                  \
315 } while (0)
316
317 #define SCTP_ASOC_CREATE_LOCK_DESTROY(_inp) do {                        \
318         mtx_destroy(&(_inp)->inp_create_mtx);                           \
319 } while (0)
320
321 #ifdef SCTP_LOCK_LOGGING
322 #define SCTP_ASOC_CREATE_LOCK(_inp) do {                                \
323         if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOCK_LOGGING_ENABLE) \
324                 sctp_log_lock(_inp, NULL, SCTP_LOG_LOCK_CREATE);        \
325         mtx_lock(&(_inp)->inp_create_mtx);                              \
326 } while (0)
327 #else
328 #define SCTP_ASOC_CREATE_LOCK(_inp) do {                                \
329         mtx_lock(&(_inp)->inp_create_mtx);                              \
330 } while (0)
331 #endif
332
333 #define SCTP_ASOC_CREATE_UNLOCK(_inp) do {                              \
334         mtx_unlock(&(_inp)->inp_create_mtx);                            \
335 } while (0)
336
337 #define SCTP_ASOC_CREATE_LOCK_CONTENDED(_inp)                           \
338         ((_inp)->inp_create_mtx.mtx_lock & MTX_CONTESTED)
339
340 /*
341  * For the majority of things (once we have found the association) we will
342  * lock the actual association mutex. This will protect all the assoiciation
343  * level queues and streams and such. We will need to lock the socket layer
344  * when we stuff data up into the receiving sb_mb. I.e. we will need to do an
345  * extra SOCKBUF_LOCK(&so->so_rcv) even though the association is locked.
346  */
347
348 #define SCTP_TCB_LOCK_INIT(_tcb) do {                                   \
349         mtx_init(&(_tcb)->tcb_mtx, "sctp-tcb", "tcb",                   \
350                  MTX_DEF | MTX_DUPOK);                                  \
351 } while (0)
352
353 #define SCTP_TCB_LOCK_DESTROY(_tcb) do {                                \
354         mtx_destroy(&(_tcb)->tcb_mtx);                                  \
355 } while (0)
356
357 #ifdef SCTP_LOCK_LOGGING
358 #define SCTP_TCB_LOCK(_tcb) do {                                        \
359         if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LOCK_LOGGING_ENABLE) \
360                 sctp_log_lock(_tcb->sctp_ep, _tcb, SCTP_LOG_LOCK_TCB);  \
361         mtx_lock(&(_tcb)->tcb_mtx);                                     \
362 } while (0)
363 #else
364 #define SCTP_TCB_LOCK(_tcb) do {                                        \
365         mtx_lock(&(_tcb)->tcb_mtx);                                     \
366 } while (0)
367
368 #endif
369
370 #define SCTP_TCB_TRYLOCK(_tcb)                                          \
371         mtx_trylock(&(_tcb)->tcb_mtx)
372
373 #define SCTP_TCB_UNLOCK(_tcb) do {                                      \
374         mtx_unlock(&(_tcb)->tcb_mtx);                                   \
375 } while (0)
376
377 #define SCTP_TCB_UNLOCK_IFOWNED(_tcb) do {                              \
378         if (mtx_owned(&(_tcb)->tcb_mtx))                                \
379                 mtx_unlock(&(_tcb)->tcb_mtx);                           \
380 } while (0)
381
382 #define SCTP_TCB_LOCK_ASSERT(_tcb) do {                                 \
383         KASSERT(mtx_owned(&(_tcb)->tcb_mtx),                            \
384                 ("Don't own TCB lock"));                                \
385 } while (0)
386
387 #define SCTP_ITERATOR_LOCK_INIT() do {                                  \
388         mtx_init(&sctp_it_ctl.it_mtx, "sctp-it", "iterator", MTX_DEF);  \
389 } while (0)
390
391 #define SCTP_ITERATOR_LOCK_DESTROY() do {                               \
392         mtx_destroy(&sctp_it_ctl.it_mtx);                               \
393 } while (0)
394
395 #define SCTP_ITERATOR_LOCK() \
396         do {                                                            \
397                 KASSERT(!mtx_owned(&sctp_it_ctl.it_mtx),                \
398                         ("Own the iterator lock"));                     \
399                 mtx_lock(&sctp_it_ctl.it_mtx);                          \
400         } while (0)
401
402 #define SCTP_ITERATOR_UNLOCK() do {                                     \
403         mtx_unlock(&sctp_it_ctl.it_mtx);                                \
404 } while (0)
405
406 #define SCTP_WQ_ADDR_INIT() do {                                        \
407         mtx_init(&SCTP_BASE_INFO(wq_addr_mtx),                          \
408                  "sctp-addr-wq","sctp_addr_wq", MTX_DEF);               \
409 } while (0)
410
411 #define SCTP_WQ_ADDR_DESTROY() do  {                                    \
412         if (mtx_owned(&SCTP_BASE_INFO(wq_addr_mtx))) {                  \
413                 mtx_unlock(&SCTP_BASE_INFO(wq_addr_mtx));               \
414         }                                                               \
415         mtx_destroy(&SCTP_BASE_INFO(wq_addr_mtx)); \
416 } while (0)
417
418 #define SCTP_WQ_ADDR_LOCK()     do {                                    \
419         mtx_lock(&SCTP_BASE_INFO(wq_addr_mtx));                         \
420 } while (0)
421
422 #define SCTP_WQ_ADDR_UNLOCK() do {                                      \
423                 mtx_unlock(&SCTP_BASE_INFO(wq_addr_mtx));               \
424 } while (0)
425
426 #define SCTP_WQ_ADDR_LOCK_ASSERT() do {                                 \
427         KASSERT(mtx_owned(&SCTP_BASE_INFO(wq_addr_mtx)),                \
428                 ("Don't own the ADDR-WQ lock"));                        \
429 } while (0)
430
431 #define SCTP_INCR_EP_COUNT() do {                                       \
432         atomic_add_int(&SCTP_BASE_INFO(ipi_count_ep), 1);               \
433 } while (0)
434
435 #define SCTP_DECR_EP_COUNT() do {                                       \
436         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_ep), 1);          \
437 } while (0)
438
439 #define SCTP_INCR_ASOC_COUNT() do {                                     \
440         atomic_add_int(&SCTP_BASE_INFO(ipi_count_asoc), 1);             \
441 } while (0)
442
443 #define SCTP_DECR_ASOC_COUNT() do {                                     \
444         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_asoc), 1);        \
445 } while (0)
446
447 #define SCTP_INCR_LADDR_COUNT() do {                                    \
448         atomic_add_int(&SCTP_BASE_INFO(ipi_count_laddr), 1);            \
449 } while (0)
450
451 #define SCTP_DECR_LADDR_COUNT() do {                                    \
452         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_laddr), 1);       \
453 } while (0)
454
455 #define SCTP_INCR_RADDR_COUNT() do {                                    \
456         atomic_add_int(&SCTP_BASE_INFO(ipi_count_raddr), 1);            \
457 } while (0)
458
459 #define SCTP_DECR_RADDR_COUNT() do {                                    \
460         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_raddr),1);        \
461 } while (0)
462
463 #define SCTP_INCR_CHK_COUNT() do {                                      \
464         atomic_add_int(&SCTP_BASE_INFO(ipi_count_chunk), 1);            \
465 } while (0)
466
467 #define SCTP_DECR_CHK_COUNT() do {                                      \
468         KASSERT(SCTP_BASE_INFO(ipi_count_chunk) > 0,                    \
469                 ("ipi_count_chunk would become negative"));             \
470         if (SCTP_BASE_INFO(ipi_count_chunk) != 0)                       \
471                 atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_chunk),   \
472                                     1);                                 \
473 } while (0)
474
475 #define SCTP_INCR_READQ_COUNT() do {                                    \
476         atomic_add_int(&SCTP_BASE_INFO(ipi_count_readq), 1);            \
477 } while (0)
478
479 #define SCTP_DECR_READQ_COUNT() do {                                    \
480         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_readq), 1);       \
481 } while (0)
482
483 #define SCTP_INCR_STRMOQ_COUNT() do {                                   \
484         atomic_add_int(&SCTP_BASE_INFO(ipi_count_strmoq), 1);           \
485 } while (0)
486
487 #define SCTP_DECR_STRMOQ_COUNT() do {                                   \
488         atomic_subtract_int(&SCTP_BASE_INFO(ipi_count_strmoq), 1);      \
489 } while (0)
490
491 #if defined(SCTP_SO_LOCK_TESTING)
492 #define SCTP_INP_SO(sctpinp)                                            \
493         (sctpinp)->ip_inp.inp.inp_socket
494 #define SCTP_SOCKET_LOCK(so, refcnt)
495 #define SCTP_SOCKET_UNLOCK(so, refcnt)
496 #endif
497
498 #endif