]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/netinet/sctp_os_bsd.h
- Matthew's changes to get inlines out, plus a few of my own
[FreeBSD/FreeBSD.git] / sys / netinet / sctp_os_bsd.h
1 /*-
2  * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved.
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions are met:
6  *
7  * a) Redistributions of source code must retain the above copyright notice,
8  *   this list of conditions and the following disclaimer.
9  *
10  * b) Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in
12  *   the documentation and/or other materials provided with the distribution.
13  *
14  * c) Neither the name of Cisco Systems, Inc. nor the names of its
15  *    contributors may be used to endorse or promote products derived
16  *    from this software without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
20  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
22  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
28  * THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 #ifndef __sctp_os_bsd_h__
33 #define __sctp_os_bsd_h__
34 /*
35  * includes
36  */
37 #include "opt_ipsec.h"
38 #include "opt_compat.h"
39 #include "opt_inet6.h"
40 #include "opt_inet.h"
41 #include "opt_sctp.h"
42 #include <sys/param.h>
43 #include <sys/ktr.h>
44 #include <sys/systm.h>
45 #include <sys/malloc.h>
46 #include <sys/kernel.h>
47 #include <sys/sysctl.h>
48 #include <sys/mbuf.h>
49 #include <sys/protosw.h>
50 #include <sys/socket.h>
51 #include <sys/socketvar.h>
52 #include <sys/sysctl.h>
53 #include <sys/resourcevar.h>
54 #include <sys/uio.h>
55 #include <sys/kthread.h>
56 #include <sys/priv.h>
57 #include <sys/random.h>
58 #include <sys/limits.h>
59 #include <sys/queue.h>
60 #include <machine/cpu.h>
61
62 #include <net/if.h>
63 #include <net/if_types.h>
64 #include <net/if_var.h>
65 #include <net/route.h>
66
67 #include <netinet/in.h>
68 #include <netinet/in_systm.h>
69 #include <netinet/ip.h>
70 #include <netinet/in_pcb.h>
71 #include <netinet/in_var.h>
72 #include <netinet/ip_var.h>
73 #include <netinet/ip_icmp.h>
74 #include <netinet/icmp_var.h>
75
76
77 #ifdef IPSEC
78 #include <netinet6/ipsec.h>
79 #include <netkey/key.h>
80 #endif                          /* IPSEC */
81
82 #ifdef INET6
83 #include <sys/domain.h>
84 #ifdef IPSEC
85 #include <netinet6/ipsec6.h>
86 #endif
87 #include <netinet/ip6.h>
88 #include <netinet6/ip6_var.h>
89 #include <netinet6/in6_pcb.h>
90 #include <netinet/icmp6.h>
91 #include <netinet6/ip6protosw.h>
92 #include <netinet6/nd6.h>
93 #include <netinet6/scope6_var.h>
94 #endif                          /* INET6 */
95
96
97 #include <netinet/ip_options.h>
98
99 #ifndef in6pcb
100 #define in6pcb          inpcb
101 #endif
102 /* Declare all the malloc names for all the various mallocs */
103 MALLOC_DECLARE(SCTP_M_MAP);
104 MALLOC_DECLARE(SCTP_M_STRMI);
105 MALLOC_DECLARE(SCTP_M_STRMO);
106 MALLOC_DECLARE(SCTP_M_ASC_ADDR);
107 MALLOC_DECLARE(SCTP_M_ASC_IT);
108 MALLOC_DECLARE(SCTP_M_AUTH_CL);
109 MALLOC_DECLARE(SCTP_M_AUTH_KY);
110 MALLOC_DECLARE(SCTP_M_AUTH_HL);
111 MALLOC_DECLARE(SCTP_M_AUTH_IF);
112 MALLOC_DECLARE(SCTP_M_STRESET);
113 MALLOC_DECLARE(SCTP_M_CMSG);
114 MALLOC_DECLARE(SCTP_M_COPYAL);
115 MALLOC_DECLARE(SCTP_M_VRF);
116 MALLOC_DECLARE(SCTP_M_IFA);
117 MALLOC_DECLARE(SCTP_M_IFN);
118 MALLOC_DECLARE(SCTP_M_TIMW);
119 MALLOC_DECLARE(SCTP_M_MVRF);
120 MALLOC_DECLARE(SCTP_M_ITER);
121 MALLOC_DECLARE(SCTP_M_SOCKOPT);
122
123 /*
124  *
125  */
126 #define USER_ADDR_NULL  (NULL)  /* FIX ME: temp */
127 #define SCTP_LIST_EMPTY(list)   LIST_EMPTY(list)
128
129 #if defined(SCTP_DEBUG)
130 #define SCTPDBG(level, params...)                                       \
131 {                                                                       \
132     do {                                                                \
133         if (sctp_debug_on & level ) {                                   \
134             printf(params);                                             \
135         }                                                               \
136     } while (0);                                                        \
137 }
138 #define SCTPDBG_ADDR(level, addr)                                       \
139 {                                                                       \
140     do {                                                                \
141         if (sctp_debug_on & level ) {                                   \
142             sctp_print_address(addr);                                   \
143         }                                                               \
144     } while (0);                                                        \
145 }
146 #define SCTPDBG_PKT(level, iph, sh)                                     \
147 {                                                                       \
148     do {                                                                \
149             if (sctp_debug_on & level) {                                \
150                     sctp_print_address_pkt(iph, sh);                    \
151             }                                                           \
152     } while (0);                                                        \
153 }
154 #else
155 #define SCTPDBG(level, params...)
156 #define SCTPDBG_ADDR(level, addr)
157 #define SCTPDBG_PKT(level, iph, sh)
158 #endif
159 #define SCTP_PRINTF(params...)  printf(params)
160
161 #ifdef SCTP_LTRACE_CHUNKS
162 #define SCTP_LTRACE_CHK(a, b, c, d) if(sctp_logging_level & SCTP_LTRACE_CHUNK_ENABLE) CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d)
163 #else
164 #define SCTP_LTRACE_CHK(a, b, c, d)
165 #endif
166
167 #ifdef SCTP_LTRACE_ERRORS
168 #define SCTP_LTRACE_ERR(a, b, c, d) if(sctp_logging_level & SCTP_LTRACE_ERROR_ENABLE) CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_ERROR_RET, 0, a, b, c, d)
169 #else
170 #define SCTP_LTRACE_ERR(a, b, c, d)
171 #endif
172
173 /*
174  * Local address and interface list handling
175  */
176 #define SCTP_MAX_VRF_ID         0
177 #define SCTP_SIZE_OF_VRF_HASH   3
178 #define SCTP_IFNAMSIZ           IFNAMSIZ
179 #define SCTP_DEFAULT_VRFID      0
180 #define SCTP_VRF_ADDR_HASH_SIZE 16
181 #define SCTP_VRF_IFN_HASH_SIZE  3
182 #define SCTP_INIT_VRF_TABLEID(vrf)
183
184 #define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP)
185
186 /*
187  * Access to IFN's to help with src-addr-selection
188  */
189 /* This could return VOID if the index works but for BSD we provide both. */
190 #define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_rt->rt_ifp
191 #define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_rt->rt_ifp->if_index
192 #define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifp)
193
194 /*
195  * general memory allocation
196  */
197 #define SCTP_MALLOC(var, type, size, name) \
198     do { \
199         MALLOC(var, type, size, name, M_NOWAIT); \
200     } while (0)
201
202 #define SCTP_FREE(var, type)    FREE(var, type)
203
204 #define SCTP_MALLOC_SONAME(var, type, size) \
205     do { \
206         MALLOC(var, type, size, M_SONAME, M_WAITOK | M_ZERO); \
207     } while (0)
208
209 #define SCTP_FREE_SONAME(var)   FREE(var, M_SONAME)
210
211 #define SCTP_PROCESS_STRUCT struct proc *
212
213 /*
214  * zone allocation functions
215  */
216 #include <vm/uma.h>
217 /* SCTP_ZONE_INIT: initialize the zone */
218 typedef struct uma_zone *sctp_zone_t;
219
220 #define UMA_ZFLAG_FULL  0x0020
221 #define SCTP_ZONE_INIT(zone, name, size, number) { \
222         zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\
223                 UMA_ZFLAG_FULL); \
224         uma_zone_set_max(zone, number); \
225 }
226
227 /* SCTP_ZONE_GET: allocate element from the zone */
228 #define SCTP_ZONE_GET(zone, type) \
229         (type *)uma_zalloc(zone, M_NOWAIT);
230
231 /* SCTP_ZONE_FREE: free element from the zone */
232 #define SCTP_ZONE_FREE(zone, element) \
233         uma_zfree(zone, element);
234 #define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT)
235 #define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark)
236
237 #define SCTP_M_COPYM    m_copym
238
239 /*
240  * timers
241  */
242 #include <sys/callout.h>
243 typedef struct callout sctp_os_timer_t;
244
245 #define SCTP_OS_TIMER_INIT(tmr) callout_init(tmr, 1)
246 #define SCTP_OS_TIMER_START     callout_reset
247 #define SCTP_OS_TIMER_STOP      callout_stop
248 #define SCTP_OS_TIMER_STOP_DRAIN callout_drain
249 #define SCTP_OS_TIMER_PENDING   callout_pending
250 #define SCTP_OS_TIMER_ACTIVE    callout_active
251 #define SCTP_OS_TIMER_DEACTIVATE callout_deactivate
252
253 #define sctp_get_tick_count() (ticks)
254
255 /* The packed define for 64 bit platforms */
256 #define SCTP_PACKED __attribute__((packed))
257
258 /*
259  * Functions
260  */
261 /* Mbuf manipulation and access macros  */
262 #define SCTP_BUF_LEN(m) (m->m_len)
263 #define SCTP_BUF_NEXT(m) (m->m_next)
264 #define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt)
265 #define SCTP_BUF_RESV_UF(m, size) m->m_data += size
266 #define SCTP_BUF_AT(m, size) m->m_data + size
267 #define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT)
268 #define SCTP_BUF_EXTEND_SIZE(m) (m->m_ext.ext_size)
269 #define SCTP_BUF_TYPE(m) (m->m_type)
270 #define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif)
271 #define SCTP_BUF_PREPEND        M_PREPEND
272
273 #define SCTP_ALIGN_TO_END(m, len) if(m->m_flags & M_PKTHDR) { \
274                                      MH_ALIGN(m, len); \
275                                   } else if ((m->m_flags & M_EXT) == 0) { \
276                                      M_ALIGN(m, len); \
277                                   }
278
279 /* We make it so if you have up to 4 threads
280  * writting based on the default size of
281  * the packet log 65 k, that would be
282  * 4 16k packets before we would hit
283  * a problem.
284  */
285 #define SCTP_PKTLOG_WRITERS_NEED_LOCK 3
286
287 /*************************/
288 /*      MTU              */
289 /*************************/
290 #define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, af) ((struct ifnet *)ifn)->if_mtu
291 #define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, rt) ((rt != NULL) ? rt->rt_rmx.rmx_mtu : 0)
292 #define SCTP_GATHER_MTU_FROM_INTFC(sctp_ifn) ((sctp_ifn->ifn_p != NULL) ? ((struct ifnet *)(sctp_ifn->ifn_p))->if_mtu : 0)
293 #define SCTP_SET_MTU_OF_ROUTE(sa, rt, mtu) do { \
294                                               if (rt != NULL) \
295                                                  rt->rt_rmx.rmx_mtu = mtu; \
296                                            } while(0)
297
298 /* (de-)register interface event notifications */
299 #define SCTP_REGISTER_INTERFACE(ifhandle, af)
300 #define SCTP_DEREGISTER_INTERFACE(ifhandle, af)
301
302 /*************************/
303 /* These are for logging */
304 /*************************/
305 /* return the base ext data pointer */
306 #define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf)
307  /* return the refcnt of the data pointer */
308 #define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ref_cnt)
309 /* return any buffer related flags, this is
310  * used beyond logging for apple only.
311  */
312 #define SCTP_BUF_GET_FLAGS(m) (m->m_flags)
313
314 /* For BSD this just accesses the M_PKTHDR length
315  * so it operates on an mbuf with hdr flag. Other
316  * O/S's may have seperate packet header and mbuf
317  * chain pointers.. thus the macro.
318  */
319 #define SCTP_HEADER_TO_CHAIN(m) (m)
320 #define SCTP_DETACH_HEADER_FROM_CHAIN(m)
321 #define SCTP_HEADER_LEN(m) (m->m_pkthdr.len)
322 #define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0
323 #define SCTP_RELEASE_HEADER(m)
324 #define SCTP_RELEASE_PKT(m)     sctp_m_freem(m)
325
326 #define SCTP_GET_PKT_VRFID(m, vrf_id)  ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID)
327
328
329
330 /* Attach the chain of data into the sendable packet. */
331 #define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \
332                                                  pak = m; \
333                                                  pak->m_pkthdr.len = packet_length; \
334                          } while(0)
335
336 /* Other m_pkthdr type things */
337 #define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0)
338 #define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP)))
339
340
341 /* This converts any input packet header
342  * into the chain of data holders, for BSD
343  * its a NOP.
344  */
345
346 /* Macro's for getting length from V6/V4 header */
347 #define SCTP_GET_IPV4_LENGTH(iph) (iph->ip_len)
348 #define SCTP_GET_IPV6_LENGTH(ip6) (ntohs(ip6->ip6_plen))
349
350 /* get the v6 hop limit */
351 #define SCTP_GET_HLIM(inp, ro)  in6_selecthlim((struct in6pcb *)&inp->ip_inp.inp, (ro ? (ro->ro_rt ? (ro->ro_rt->rt_ifp) : (NULL)) : (NULL)));
352
353 /* is the endpoint v6only? */
354 #define SCTP_IPV6_V6ONLY(inp)   (((struct inpcb *)inp)->inp_flags & IN6P_IPV6_V6ONLY)
355 /* is the socket non-blocking? */
356 #define SCTP_SO_IS_NBIO(so)     ((so)->so_state & SS_NBIO)
357 #define SCTP_SET_SO_NBIO(so)    ((so)->so_state |= SS_NBIO)
358 #define SCTP_CLEAR_SO_NBIO(so)  ((so)->so_state &= ~SS_NBIO)
359 /* get the socket type */
360 #define SCTP_SO_TYPE(so)        ((so)->so_type)
361 /* reserve sb space for a socket */
362 #define SCTP_SORESERVE(so, send, recv)  soreserve(so, send, recv)
363 /* wakeup a socket */
364 #define SCTP_SOWAKEUP(so)       wakeup(&(so)->so_timeo)
365 /* clear the socket buffer state */
366 #define SCTP_SB_CLEAR(sb)       \
367         (sb).sb_cc = 0;         \
368         (sb).sb_mb = NULL;      \
369         (sb).sb_mbcnt = 0;
370
371 #define SCTP_SB_LIMIT_RCV(so) so->so_rcv.sb_hiwat
372 #define SCTP_SB_LIMIT_SND(so) so->so_snd.sb_hiwat
373
374 /*
375  * routes, output, etc.
376  */
377 typedef struct route sctp_route_t;
378 typedef struct rtentry sctp_rtentry_t;
379
380 #define SCTP_RTALLOC(ro, vrf_id) rtalloc_ign((struct route *)ro, 0UL)
381
382 /* Future zero copy wakeup/send  function */
383 #define SCTP_ZERO_COPY_EVENT(inp, so)
384 /* This is re-pulse ourselves for sendbuf */
385 #define SCTP_ZERO_COPY_SENDQ_EVENT(inp, so)
386
387 /*
388  * IP output routines
389  */
390 #define SCTP_IP_OUTPUT(result, o_pak, ro, stcb, vrf_id) \
391 { \
392         int o_flgs = 0; \
393         if (stcb && stcb->sctp_ep && stcb->sctp_ep->sctp_socket) { \
394                 o_flgs = IP_RAWOUTPUT | (stcb->sctp_ep->sctp_socket->so_options & SO_DONTROUTE); \
395         } else { \
396                 o_flgs = IP_RAWOUTPUT; \
397         } \
398         result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \
399 }
400
401 #define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, stcb, vrf_id) \
402 { \
403         if (stcb && stcb->sctp_ep) \
404                 result = ip6_output(o_pak, \
405                                     ((struct in6pcb *)(stcb->sctp_ep))->in6p_outputopts, \
406                                     (ro), 0, 0, ifp, NULL); \
407         else \
408                 result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \
409 }
410
411 struct mbuf *
412 sctp_get_mbuf_for_msg(unsigned int space_needed,
413     int want_header, int how, int allonebuf, int type);
414
415
416 /*
417  * SCTP AUTH
418  */
419 #define HAVE_SHA2
420
421 #define SCTP_READ_RANDOM(buf, len)      read_random(buf, len)
422
423 #ifdef USE_SCTP_SHA1
424 #include <netinet/sctp_sha1.h>
425 #else
426 #include <crypto/sha1.h>
427 /* map standard crypto API names */
428 #define SHA1_Init       SHA1Init
429 #define SHA1_Update     SHA1Update
430 #define SHA1_Final(x,y) SHA1Final((caddr_t)x, y)
431 #endif
432
433 #if defined(HAVE_SHA2)
434 #include <crypto/sha2/sha2.h>
435 #endif
436
437 #include <sys/md5.h>
438 /* map standard crypto API names */
439 #define MD5_Init        MD5Init
440 #define MD5_Update      MD5Update
441 #define MD5_Final       MD5Final
442
443 #endif