]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/netinet6/in6_src.c
Merge OpenSSL 0.9.8m into head.
[FreeBSD/FreeBSD.git] / sys / netinet6 / in6_src.c
1 /*-
2  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the project nor the names of its contributors
14  *    may be used to endorse or promote products derived from this software
15  *    without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  *
29  *      $KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $
30  */
31
32 /*-
33  * Copyright (c) 1982, 1986, 1991, 1993
34  *      The Regents of the University of California.  All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  * 1. Redistributions of source code must retain the above copyright
40  *    notice, this list of conditions and the following disclaimer.
41  * 2. Redistributions in binary form must reproduce the above copyright
42  *    notice, this list of conditions and the following disclaimer in the
43  *    documentation and/or other materials provided with the distribution.
44  * 4. Neither the name of the University nor the names of its contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58  * SUCH DAMAGE.
59  *
60  *      @(#)in_pcb.c    8.2 (Berkeley) 1/4/94
61  */
62
63 #include <sys/cdefs.h>
64 __FBSDID("$FreeBSD$");
65
66 #include "opt_inet.h"
67 #include "opt_inet6.h"
68 #include "opt_mpath.h"
69
70 #include <sys/param.h>
71 #include <sys/systm.h>
72 #include <sys/lock.h>
73 #include <sys/malloc.h>
74 #include <sys/mbuf.h>
75 #include <sys/priv.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sockio.h>
80 #include <sys/sysctl.h>
81 #include <sys/errno.h>
82 #include <sys/time.h>
83 #include <sys/jail.h>
84 #include <sys/kernel.h>
85 #include <sys/sx.h>
86
87 #include <net/if.h>
88 #include <net/if_dl.h>
89 #include <net/route.h>
90 #include <net/if_llatbl.h>
91 #ifdef RADIX_MPATH
92 #include <net/radix_mpath.h>
93 #endif
94
95 #include <netinet/in.h>
96 #include <netinet/in_var.h>
97 #include <netinet/in_systm.h>
98 #include <netinet/ip.h>
99 #include <netinet/in_pcb.h>
100 #include <netinet/ip_var.h>
101 #include <netinet/udp.h>
102 #include <netinet/udp_var.h>
103
104 #include <netinet6/in6_var.h>
105 #include <netinet/ip6.h>
106 #include <netinet6/in6_pcb.h>
107 #include <netinet6/ip6_var.h>
108 #include <netinet6/scope6_var.h>
109 #include <netinet6/nd6.h>
110
111 static struct mtx addrsel_lock;
112 #define ADDRSEL_LOCK_INIT()     mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
113 #define ADDRSEL_LOCK()          mtx_lock(&addrsel_lock)
114 #define ADDRSEL_UNLOCK()        mtx_unlock(&addrsel_lock)
115 #define ADDRSEL_LOCK_ASSERT()   mtx_assert(&addrsel_lock, MA_OWNED)
116
117 static struct sx addrsel_sxlock;
118 #define ADDRSEL_SXLOCK_INIT()   sx_init(&addrsel_sxlock, "addrsel_sxlock")
119 #define ADDRSEL_SLOCK()         sx_slock(&addrsel_sxlock)
120 #define ADDRSEL_SUNLOCK()       sx_sunlock(&addrsel_sxlock)
121 #define ADDRSEL_XLOCK()         sx_xlock(&addrsel_sxlock)
122 #define ADDRSEL_XUNLOCK()       sx_xunlock(&addrsel_sxlock)
123
124 #define ADDR_LABEL_NOTAPP (-1)
125
126 static VNET_DEFINE(struct in6_addrpolicy, defaultaddrpolicy);
127 VNET_DEFINE(int, ip6_prefer_tempaddr);
128
129 #define V_defaultaddrpolicy             VNET(defaultaddrpolicy)
130
131 static int selectroute __P((struct sockaddr_in6 *, struct ip6_pktopts *,
132         struct ip6_moptions *, struct route_in6 *, struct ifnet **,
133         struct rtentry **, int));
134 static int in6_selectif __P((struct sockaddr_in6 *, struct ip6_pktopts *,
135         struct ip6_moptions *, struct route_in6 *ro, struct ifnet **));
136
137 static struct in6_addrpolicy *lookup_addrsel_policy(struct sockaddr_in6 *);
138
139 static void init_policy_queue(void);
140 static int add_addrsel_policyent(struct in6_addrpolicy *);
141 static int delete_addrsel_policyent(struct in6_addrpolicy *);
142 static int walk_addrsel_policy __P((int (*)(struct in6_addrpolicy *, void *),
143                                     void *));
144 static int dump_addrsel_policyent(struct in6_addrpolicy *, void *);
145 static struct in6_addrpolicy *match_addrsel_policy(struct sockaddr_in6 *);
146
147 /*
148  * Return an IPv6 address, which is the most appropriate for a given
149  * destination and user specified options.
150  * If necessary, this function lookups the routing table and returns
151  * an entry to the caller for later use.
152  */
153 #define REPLACE(r) do {\
154         if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
155                 sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
156                 V_ip6stat.ip6s_sources_rule[(r)]++; \
157         /* { \
158         char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
159         printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
160         } */ \
161         goto replace; \
162 } while(0)
163 #define NEXT(r) do {\
164         if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
165                 sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
166                 V_ip6stat.ip6s_sources_rule[(r)]++; \
167         /* { \
168         char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
169         printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
170         } */ \
171         goto next;              /* XXX: we can't use 'continue' here */ \
172 } while(0)
173 #define BREAK(r) do { \
174         if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
175                 sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
176                 V_ip6stat.ip6s_sources_rule[(r)]++; \
177         goto out;               /* XXX: we can't use 'break' here */ \
178 } while(0)
179
180 int
181 in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
182     struct inpcb *inp, struct route_in6 *ro, struct ucred *cred,
183     struct ifnet **ifpp, struct in6_addr *srcp)
184 {
185         struct in6_addr dst;
186         struct ifnet *ifp = NULL;
187         struct in6_ifaddr *ia = NULL, *ia_best = NULL;
188         struct in6_pktinfo *pi = NULL;
189         int dst_scope = -1, best_scope = -1, best_matchlen = -1;
190         struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
191         u_int32_t odstzone;
192         int prefer_tempaddr;
193         int error;
194         struct ip6_moptions *mopts;
195
196         KASSERT(srcp != NULL, ("%s: srcp is NULL", __func__));
197
198         dst = dstsock->sin6_addr; /* make a copy for local operation */
199         if (ifpp)
200                 *ifpp = NULL;
201
202         if (inp != NULL) {
203                 INP_LOCK_ASSERT(inp);
204                 mopts = inp->in6p_moptions;
205         } else {
206                 mopts = NULL;
207         }
208
209         /*
210          * If the source address is explicitly specified by the caller,
211          * check if the requested source address is indeed a unicast address
212          * assigned to the node, and can be used as the packet's source
213          * address.  If everything is okay, use the address as source.
214          */
215         if (opts && (pi = opts->ip6po_pktinfo) &&
216             !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
217                 struct sockaddr_in6 srcsock;
218                 struct in6_ifaddr *ia6;
219
220                 /* get the outgoing interface */
221                 if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
222                         return (error);
223
224                 /*
225                  * determine the appropriate zone id of the source based on
226                  * the zone of the destination and the outgoing interface.
227                  * If the specified address is ambiguous wrt the scope zone,
228                  * the interface must be specified; otherwise, ifa_ifwithaddr()
229                  * will fail matching the address.
230                  */
231                 bzero(&srcsock, sizeof(srcsock));
232                 srcsock.sin6_family = AF_INET6;
233                 srcsock.sin6_len = sizeof(srcsock);
234                 srcsock.sin6_addr = pi->ipi6_addr;
235                 if (ifp) {
236                         error = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
237                         if (error)
238                                 return (error);
239                 }
240                 if (cred != NULL && (error = prison_local_ip6(cred,
241                     &srcsock.sin6_addr, (inp != NULL &&
242                     (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
243                         return (error);
244
245                 ia6 = (struct in6_ifaddr *)ifa_ifwithaddr(
246                     (struct sockaddr *)&srcsock);
247                 if (ia6 == NULL ||
248                     (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
249                         if (ia6 != NULL)
250                                 ifa_free(&ia6->ia_ifa);
251                         return (EADDRNOTAVAIL);
252                 }
253                 pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
254                 if (ifpp)
255                         *ifpp = ifp;
256                 bcopy(&ia6->ia_addr.sin6_addr, srcp, sizeof(*srcp));
257                 ifa_free(&ia6->ia_ifa);
258                 return (0);
259         }
260
261         /*
262          * Otherwise, if the socket has already bound the source, just use it.
263          */
264         if (inp != NULL && !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
265                 if (cred != NULL &&
266                     (error = prison_local_ip6(cred, &inp->in6p_laddr,
267                     ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
268                         return (error);
269                 bcopy(&inp->in6p_laddr, srcp, sizeof(*srcp));
270                 return (0);
271         }
272
273         /*
274          * Bypass source address selection and use the primary jail IP
275          * if requested.
276          */
277         if (cred != NULL && !prison_saddrsel_ip6(cred, srcp))
278                 return (0);
279
280         /*
281          * If the address is not specified, choose the best one based on
282          * the outgoing interface and the destination address.
283          */
284         /* get the outgoing interface */
285         if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
286                 return (error);
287
288 #ifdef DIAGNOSTIC
289         if (ifp == NULL)        /* this should not happen */
290                 panic("in6_selectsrc: NULL ifp");
291 #endif
292         error = in6_setscope(&dst, ifp, &odstzone);
293         if (error)
294                 return (error);
295
296         IN6_IFADDR_RLOCK();
297         TAILQ_FOREACH(ia, &V_in6_ifaddrhead, ia_link) {
298                 int new_scope = -1, new_matchlen = -1;
299                 struct in6_addrpolicy *new_policy = NULL;
300                 u_int32_t srczone, osrczone, dstzone;
301                 struct in6_addr src;
302                 struct ifnet *ifp1 = ia->ia_ifp;
303
304                 /*
305                  * We'll never take an address that breaks the scope zone
306                  * of the destination.  We also skip an address if its zone
307                  * does not contain the outgoing interface.
308                  * XXX: we should probably use sin6_scope_id here.
309                  */
310                 if (in6_setscope(&dst, ifp1, &dstzone) ||
311                     odstzone != dstzone) {
312                         continue;
313                 }
314                 src = ia->ia_addr.sin6_addr;
315                 if (in6_setscope(&src, ifp, &osrczone) ||
316                     in6_setscope(&src, ifp1, &srczone) ||
317                     osrczone != srczone) {
318                         continue;
319                 }
320
321                 /* avoid unusable addresses */
322                 if ((ia->ia6_flags &
323                      (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
324                                 continue;
325                 }
326                 if (!V_ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
327                         continue;
328
329                 if (cred != NULL &&
330                     prison_local_ip6(cred, &ia->ia_addr.sin6_addr,
331                         (inp != NULL &&
332                         (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0)) != 0)
333                         continue;
334
335                 /* Rule 1: Prefer same address */
336                 if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
337                         ia_best = ia;
338                         BREAK(1); /* there should be no better candidate */
339                 }
340
341                 if (ia_best == NULL)
342                         REPLACE(0);
343
344                 /* Rule 2: Prefer appropriate scope */
345                 if (dst_scope < 0)
346                         dst_scope = in6_addrscope(&dst);
347                 new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
348                 if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
349                         if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
350                                 REPLACE(2);
351                         NEXT(2);
352                 } else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
353                         if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
354                                 NEXT(2);
355                         REPLACE(2);
356                 }
357
358                 /*
359                  * Rule 3: Avoid deprecated addresses.  Note that the case of
360                  * !ip6_use_deprecated is already rejected above.
361                  */
362                 if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
363                         NEXT(3);
364                 if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
365                         REPLACE(3);
366
367                 /* Rule 4: Prefer home addresses */
368                 /*
369                  * XXX: This is a TODO.  We should probably merge the MIP6
370                  * case above.
371                  */
372
373                 /* Rule 5: Prefer outgoing interface */
374                 if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
375                         NEXT(5);
376                 if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
377                         REPLACE(5);
378
379                 /*
380                  * Rule 6: Prefer matching label
381                  * Note that best_policy should be non-NULL here.
382                  */
383                 if (dst_policy == NULL)
384                         dst_policy = lookup_addrsel_policy(dstsock);
385                 if (dst_policy->label != ADDR_LABEL_NOTAPP) {
386                         new_policy = lookup_addrsel_policy(&ia->ia_addr);
387                         if (dst_policy->label == best_policy->label &&
388                             dst_policy->label != new_policy->label)
389                                 NEXT(6);
390                         if (dst_policy->label != best_policy->label &&
391                             dst_policy->label == new_policy->label)
392                                 REPLACE(6);
393                 }
394
395                 /*
396                  * Rule 7: Prefer public addresses.
397                  * We allow users to reverse the logic by configuring
398                  * a sysctl variable, so that privacy conscious users can
399                  * always prefer temporary addresses.
400                  */
401                 if (opts == NULL ||
402                     opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
403                         prefer_tempaddr = V_ip6_prefer_tempaddr;
404                 } else if (opts->ip6po_prefer_tempaddr ==
405                     IP6PO_TEMPADDR_NOTPREFER) {
406                         prefer_tempaddr = 0;
407                 } else
408                         prefer_tempaddr = 1;
409                 if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
410                     (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
411                         if (prefer_tempaddr)
412                                 REPLACE(7);
413                         else
414                                 NEXT(7);
415                 }
416                 if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
417                     !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
418                         if (prefer_tempaddr)
419                                 NEXT(7);
420                         else
421                                 REPLACE(7);
422                 }
423
424                 /*
425                  * Rule 8: prefer addresses on alive interfaces.
426                  * This is a KAME specific rule.
427                  */
428                 if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
429                     !(ia->ia_ifp->if_flags & IFF_UP))
430                         NEXT(8);
431                 if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
432                     (ia->ia_ifp->if_flags & IFF_UP))
433                         REPLACE(8);
434
435                 /*
436                  * Rule 14: Use longest matching prefix.
437                  * Note: in the address selection draft, this rule is
438                  * documented as "Rule 8".  However, since it is also
439                  * documented that this rule can be overridden, we assign
440                  * a large number so that it is easy to assign smaller numbers
441                  * to more preferred rules.
442                  */
443                 new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
444                 if (best_matchlen < new_matchlen)
445                         REPLACE(14);
446                 if (new_matchlen < best_matchlen)
447                         NEXT(14);
448
449                 /* Rule 15 is reserved. */
450
451                 /*
452                  * Last resort: just keep the current candidate.
453                  * Or, do we need more rules?
454                  */
455                 continue;
456
457           replace:
458                 ia_best = ia;
459                 best_scope = (new_scope >= 0 ? new_scope :
460                               in6_addrscope(&ia_best->ia_addr.sin6_addr));
461                 best_policy = (new_policy ? new_policy :
462                                lookup_addrsel_policy(&ia_best->ia_addr));
463                 best_matchlen = (new_matchlen >= 0 ? new_matchlen :
464                                  in6_matchlen(&ia_best->ia_addr.sin6_addr,
465                                               &dst));
466
467           next:
468                 continue;
469
470           out:
471                 break;
472         }
473
474         if ((ia = ia_best) == NULL) {
475                 IN6_IFADDR_RUNLOCK();
476                 return (EADDRNOTAVAIL);
477         }
478
479         if (ifpp)
480                 *ifpp = ifp;
481
482         bcopy(&ia->ia_addr.sin6_addr, srcp, sizeof(*srcp));
483         IN6_IFADDR_RUNLOCK();
484         return (0);
485 }
486
487 /*
488  * clone - meaningful only for bsdi and freebsd
489  */
490 static int
491 selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
492     struct ip6_moptions *mopts, struct route_in6 *ro,
493     struct ifnet **retifp, struct rtentry **retrt, int norouteok)
494 {
495         int error = 0;
496         struct ifnet *ifp = NULL;
497         struct rtentry *rt = NULL;
498         struct sockaddr_in6 *sin6_next;
499         struct in6_pktinfo *pi = NULL;
500         struct in6_addr *dst = &dstsock->sin6_addr;
501 #if 0
502         char ip6buf[INET6_ADDRSTRLEN];
503
504         if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
505             dstsock->sin6_addr.s6_addr32[1] == 0 &&
506             !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
507                 printf("in6_selectroute: strange destination %s\n",
508                        ip6_sprintf(ip6buf, &dstsock->sin6_addr));
509         } else {
510                 printf("in6_selectroute: destination = %s%%%d\n",
511                        ip6_sprintf(ip6buf, &dstsock->sin6_addr),
512                        dstsock->sin6_scope_id); /* for debug */
513         }
514 #endif
515
516         /* If the caller specify the outgoing interface explicitly, use it. */
517         if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
518                 /* XXX boundary check is assumed to be already done. */
519                 ifp = ifnet_byindex(pi->ipi6_ifindex);
520                 if (ifp != NULL &&
521                     (norouteok || retrt == NULL ||
522                     IN6_IS_ADDR_MULTICAST(dst))) {
523                         /*
524                          * we do not have to check or get the route for
525                          * multicast.
526                          */
527                         goto done;
528                 } else
529                         goto getroute;
530         }
531
532         /*
533          * If the destination address is a multicast address and the outgoing
534          * interface for the address is specified by the caller, use it.
535          */
536         if (IN6_IS_ADDR_MULTICAST(dst) &&
537             mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
538                 goto done; /* we do not need a route for multicast. */
539         }
540
541   getroute:
542         /*
543          * If the next hop address for the packet is specified by the caller,
544          * use it as the gateway.
545          */
546         if (opts && opts->ip6po_nexthop) {
547                 struct route_in6 *ron;
548                 struct llentry *la;
549             
550                 sin6_next = satosin6(opts->ip6po_nexthop);
551                 
552                 /* at this moment, we only support AF_INET6 next hops */
553                 if (sin6_next->sin6_family != AF_INET6) {
554                         error = EAFNOSUPPORT; /* or should we proceed? */
555                         goto done;
556                 }
557
558                 /*
559                  * If the next hop is an IPv6 address, then the node identified
560                  * by that address must be a neighbor of the sending host.
561                  */
562                 ron = &opts->ip6po_nextroute;
563                 /*
564                  * XXX what do we do here?
565                  * PLZ to be fixing
566                  */
567
568
569                 if (ron->ro_rt == NULL) {
570                         rtalloc((struct route *)ron); /* multi path case? */
571                         if (ron->ro_rt == NULL) {
572                                 if (ron->ro_rt) {
573                                         RTFREE(ron->ro_rt);
574                                         ron->ro_rt = NULL;
575                                 }
576                                 error = EHOSTUNREACH;
577                                 goto done;
578                         } 
579                 }
580
581                 rt = ron->ro_rt;
582                 ifp = rt->rt_ifp;
583                 IF_AFDATA_LOCK(ifp);
584                 la = lla_lookup(LLTABLE6(ifp), 0, (struct sockaddr *)&sin6_next->sin6_addr);
585                 IF_AFDATA_UNLOCK(ifp);
586                 if (la != NULL) 
587                         LLE_RUNLOCK(la);
588                 else {
589                         error = EHOSTUNREACH;
590                         goto done;
591                 }
592 #if 0
593                 if ((ron->ro_rt &&
594                      (ron->ro_rt->rt_flags & (RTF_UP | RTF_LLINFO)) !=
595                      (RTF_UP | RTF_LLINFO)) ||
596                     !IN6_ARE_ADDR_EQUAL(&satosin6(&ron->ro_dst)->sin6_addr,
597                     &sin6_next->sin6_addr)) {
598                         if (ron->ro_rt) {
599                                 RTFREE(ron->ro_rt);
600                                 ron->ro_rt = NULL;
601                         }
602                         *satosin6(&ron->ro_dst) = *sin6_next;
603                 }
604                 if (ron->ro_rt == NULL) {
605                         rtalloc((struct route *)ron); /* multi path case? */
606                         if (ron->ro_rt == NULL ||
607                             !(ron->ro_rt->rt_flags & RTF_LLINFO)) {
608                                 if (ron->ro_rt) {
609                                         RTFREE(ron->ro_rt);
610                                         ron->ro_rt = NULL;
611                                 }
612                                 error = EHOSTUNREACH;
613                                 goto done;
614                         }
615                 }
616 #endif
617
618                 /*
619                  * When cloning is required, try to allocate a route to the
620                  * destination so that the caller can store path MTU
621                  * information.
622                  */
623                 goto done;
624         }
625
626         /*
627          * Use a cached route if it exists and is valid, else try to allocate
628          * a new one.  Note that we should check the address family of the
629          * cached destination, in case of sharing the cache with IPv4.
630          */
631         if (ro) {
632                 if (ro->ro_rt &&
633                     (!(ro->ro_rt->rt_flags & RTF_UP) ||
634                      ((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
635                      !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
636                      dst))) {
637                         RTFREE(ro->ro_rt);
638                         ro->ro_rt = (struct rtentry *)NULL;
639                 }
640                 if (ro->ro_rt == (struct rtentry *)NULL) {
641                         struct sockaddr_in6 *sa6;
642
643                         /* No route yet, so try to acquire one */
644                         bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
645                         sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
646                         *sa6 = *dstsock;
647                         sa6->sin6_scope_id = 0;
648
649 #ifdef RADIX_MPATH
650                                 rtalloc_mpath((struct route *)ro,
651                                     ntohl(sa6->sin6_addr.s6_addr32[3]));
652 #else                   
653                                 ro->ro_rt = rtalloc1(&((struct route *)ro)
654                                     ->ro_dst, 0, 0UL);
655                                 if (ro->ro_rt)
656                                         RT_UNLOCK(ro->ro_rt);
657 #endif
658                 }
659                                 
660                 /*
661                  * do not care about the result if we have the nexthop
662                  * explicitly specified.
663                  */
664                 if (opts && opts->ip6po_nexthop)
665                         goto done;
666
667                 if (ro->ro_rt) {
668                         ifp = ro->ro_rt->rt_ifp;
669
670                         if (ifp == NULL) { /* can this really happen? */
671                                 RTFREE(ro->ro_rt);
672                                 ro->ro_rt = NULL;
673                         }
674                 }
675                 if (ro->ro_rt == NULL)
676                         error = EHOSTUNREACH;
677                 rt = ro->ro_rt;
678
679                 /*
680                  * Check if the outgoing interface conflicts with
681                  * the interface specified by ipi6_ifindex (if specified).
682                  * Note that loopback interface is always okay.
683                  * (this may happen when we are sending a packet to one of
684                  *  our own addresses.)
685                  */
686                 if (ifp && opts && opts->ip6po_pktinfo &&
687                     opts->ip6po_pktinfo->ipi6_ifindex) {
688                         if (!(ifp->if_flags & IFF_LOOPBACK) &&
689                             ifp->if_index !=
690                             opts->ip6po_pktinfo->ipi6_ifindex) {
691                                 error = EHOSTUNREACH;
692                                 goto done;
693                         }
694                 }
695         }
696
697   done:
698         if (ifp == NULL && rt == NULL) {
699                 /*
700                  * This can happen if the caller did not pass a cached route
701                  * nor any other hints.  We treat this case an error.
702                  */
703                 error = EHOSTUNREACH;
704         }
705         if (error == EHOSTUNREACH)
706                 V_ip6stat.ip6s_noroute++;
707
708         if (retifp != NULL) {
709                 *retifp = ifp;
710
711                 /*
712                  * Adjust the "outgoing" interface.  If we're going to loop 
713                  * the packet back to ourselves, the ifp would be the loopback 
714                  * interface. However, we'd rather know the interface associated 
715                  * to the destination address (which should probably be one of 
716                  * our own addresses.)
717                  */
718                 if (rt) {
719                         if ((rt->rt_ifp->if_flags & IFF_LOOPBACK) &&
720                             (rt->rt_gateway->sa_family == AF_LINK))
721                                 *retifp = 
722                                         ifnet_byindex(((struct sockaddr_dl *)
723                                                        rt->rt_gateway)->sdl_index);
724                 }
725         }
726
727         if (retrt != NULL)
728                 *retrt = rt;    /* rt may be NULL */
729
730         return (error);
731 }
732
733 static int
734 in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
735     struct ip6_moptions *mopts, struct route_in6 *ro, struct ifnet **retifp)
736 {
737         int error;
738         struct route_in6 sro;
739         struct rtentry *rt = NULL;
740
741         if (ro == NULL) {
742                 bzero(&sro, sizeof(sro));
743                 ro = &sro;
744         }
745
746         if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
747                                      &rt, 1)) != 0) {
748                 if (ro == &sro && rt && rt == sro.ro_rt)
749                         RTFREE(rt);
750                 return (error);
751         }
752
753         /*
754          * do not use a rejected or black hole route.
755          * XXX: this check should be done in the L2 output routine.
756          * However, if we skipped this check here, we'd see the following
757          * scenario:
758          * - install a rejected route for a scoped address prefix
759          *   (like fe80::/10)
760          * - send a packet to a destination that matches the scoped prefix,
761          *   with ambiguity about the scope zone.
762          * - pick the outgoing interface from the route, and disambiguate the
763          *   scope zone with the interface.
764          * - ip6_output() would try to get another route with the "new"
765          *   destination, which may be valid.
766          * - we'd see no error on output.
767          * Although this may not be very harmful, it should still be confusing.
768          * We thus reject the case here.
769          */
770         if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE))) {
771                 int flags = (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
772
773                 if (ro == &sro && rt && rt == sro.ro_rt)
774                         RTFREE(rt);
775                 return (flags);
776         }
777
778         if (ro == &sro && rt && rt == sro.ro_rt)
779                 RTFREE(rt);
780         return (0);
781 }
782
783 /*
784  * clone - meaningful only for bsdi and freebsd
785  */
786 int
787 in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
788     struct ip6_moptions *mopts, struct route_in6 *ro,
789     struct ifnet **retifp, struct rtentry **retrt)
790 {
791
792         return (selectroute(dstsock, opts, mopts, ro, retifp,
793             retrt, 0));
794 }
795
796 /*
797  * Default hop limit selection. The precedence is as follows:
798  * 1. Hoplimit value specified via ioctl.
799  * 2. (If the outgoing interface is detected) the current
800  *     hop limit of the interface specified by router advertisement.
801  * 3. The system default hoplimit.
802  */
803 int
804 in6_selecthlim(struct inpcb *in6p, struct ifnet *ifp)
805 {
806
807         if (in6p && in6p->in6p_hops >= 0)
808                 return (in6p->in6p_hops);
809         else if (ifp)
810                 return (ND_IFINFO(ifp)->chlim);
811         else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
812                 struct route_in6 ro6;
813                 struct ifnet *lifp;
814
815                 bzero(&ro6, sizeof(ro6));
816                 ro6.ro_dst.sin6_family = AF_INET6;
817                 ro6.ro_dst.sin6_len = sizeof(struct sockaddr_in6);
818                 ro6.ro_dst.sin6_addr = in6p->in6p_faddr;
819                 rtalloc((struct route *)&ro6);
820                 if (ro6.ro_rt) {
821                         lifp = ro6.ro_rt->rt_ifp;
822                         RTFREE(ro6.ro_rt);
823                         if (lifp)
824                                 return (ND_IFINFO(lifp)->chlim);
825                 } else
826                         return (V_ip6_defhlim);
827         }
828         return (V_ip6_defhlim);
829 }
830
831 /*
832  * XXX: this is borrowed from in6_pcbbind(). If possible, we should
833  * share this function by all *bsd*...
834  */
835 int
836 in6_pcbsetport(struct in6_addr *laddr, struct inpcb *inp, struct ucred *cred)
837 {
838         struct socket *so = inp->inp_socket;
839         u_int16_t lport = 0, first, last, *lastport;
840         int count, error, wild = 0, dorandom;
841         struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
842
843         INP_INFO_WLOCK_ASSERT(pcbinfo);
844         INP_WLOCK_ASSERT(inp);
845
846         error = prison_local_ip6(cred, laddr,
847             ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0));
848         if (error)
849                 return(error);
850
851         /* XXX: this is redundant when called from in6_pcbbind */
852         if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
853                 wild = INPLOOKUP_WILDCARD;
854
855         inp->inp_flags |= INP_ANONPORT;
856
857         if (inp->inp_flags & INP_HIGHPORT) {
858                 first = V_ipport_hifirstauto;   /* sysctl */
859                 last  = V_ipport_hilastauto;
860                 lastport = &pcbinfo->ipi_lasthi;
861         } else if (inp->inp_flags & INP_LOWPORT) {
862                 error = priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT, 0);
863                 if (error)
864                         return error;
865                 first = V_ipport_lowfirstauto;  /* 1023 */
866                 last  = V_ipport_lowlastauto;   /* 600 */
867                 lastport = &pcbinfo->ipi_lastlow;
868         } else {
869                 first = V_ipport_firstauto;     /* sysctl */
870                 last  = V_ipport_lastauto;
871                 lastport = &pcbinfo->ipi_lastport;
872         }
873
874         /*
875          * For UDP, use random port allocation as long as the user
876          * allows it.  For TCP (and as of yet unknown) connections,
877          * use random port allocation only if the user allows it AND
878          * ipport_tick() allows it.
879          */
880         if (V_ipport_randomized &&
881             (!V_ipport_stoprandom || pcbinfo == &V_udbinfo))
882                 dorandom = 1;
883         else
884                 dorandom = 0;
885         /*
886          * It makes no sense to do random port allocation if
887          * we have the only port available.
888          */
889         if (first == last)
890                 dorandom = 0;
891         /* Make sure to not include UDP packets in the count. */
892         if (pcbinfo != &V_udbinfo)
893                 V_ipport_tcpallocs++;
894
895         /*
896          * Instead of having two loops further down counting up or down
897          * make sure that first is always <= last and go with only one
898          * code path implementing all logic.
899          */
900         if (first > last) {
901                 u_int16_t aux;
902
903                 aux = first;
904                 first = last;
905                 last = aux;
906         }
907
908         if (dorandom)
909                 *lastport = first + (arc4random() % (last - first));
910
911         count = last - first;
912
913         do {
914                 if (count-- < 0) {      /* completely used? */
915                         /* Undo an address bind that may have occurred. */
916                         inp->in6p_laddr = in6addr_any;
917                         return (EADDRNOTAVAIL);
918                 }
919                 ++*lastport;
920                 if (*lastport < first || *lastport > last)
921                         *lastport = first;
922                 lport = htons(*lastport);
923         } while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
924             lport, wild, cred));
925
926         inp->inp_lport = lport;
927         if (in_pcbinshash(inp) != 0) {
928                 inp->in6p_laddr = in6addr_any;
929                 inp->inp_lport = 0;
930                 return (EAGAIN);
931         }
932
933         return (0);
934 }
935
936 void
937 addrsel_policy_init(void)
938 {
939
940         V_ip6_prefer_tempaddr = 0;
941
942         init_policy_queue();
943
944         /* initialize the "last resort" policy */
945         bzero(&V_defaultaddrpolicy, sizeof(V_defaultaddrpolicy));
946         V_defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
947
948         if (!IS_DEFAULT_VNET(curvnet))
949                 return;
950
951         ADDRSEL_LOCK_INIT();
952         ADDRSEL_SXLOCK_INIT();
953 }
954
955 static struct in6_addrpolicy *
956 lookup_addrsel_policy(struct sockaddr_in6 *key)
957 {
958         struct in6_addrpolicy *match = NULL;
959
960         ADDRSEL_LOCK();
961         match = match_addrsel_policy(key);
962
963         if (match == NULL)
964                 match = &V_defaultaddrpolicy;
965         else
966                 match->use++;
967         ADDRSEL_UNLOCK();
968
969         return (match);
970 }
971
972 /*
973  * Subroutines to manage the address selection policy table via sysctl.
974  */
975 struct walkarg {
976         struct sysctl_req *w_req;
977 };
978
979 static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
980 SYSCTL_DECL(_net_inet6_ip6);
981 SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
982         CTLFLAG_RD, in6_src_sysctl, "");
983
984 static int
985 in6_src_sysctl(SYSCTL_HANDLER_ARGS)
986 {
987         struct walkarg w;
988
989         if (req->newptr)
990                 return EPERM;
991
992         bzero(&w, sizeof(w));
993         w.w_req = req;
994
995         return (walk_addrsel_policy(dump_addrsel_policyent, &w));
996 }
997
998 int
999 in6_src_ioctl(u_long cmd, caddr_t data)
1000 {
1001         int i;
1002         struct in6_addrpolicy ent0;
1003
1004         if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
1005                 return (EOPNOTSUPP); /* check for safety */
1006
1007         ent0 = *(struct in6_addrpolicy *)data;
1008
1009         if (ent0.label == ADDR_LABEL_NOTAPP)
1010                 return (EINVAL);
1011         /* check if the prefix mask is consecutive. */
1012         if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
1013                 return (EINVAL);
1014         /* clear trailing garbages (if any) of the prefix address. */
1015         for (i = 0; i < 4; i++) {
1016                 ent0.addr.sin6_addr.s6_addr32[i] &=
1017                         ent0.addrmask.sin6_addr.s6_addr32[i];
1018         }
1019         ent0.use = 0;
1020
1021         switch (cmd) {
1022         case SIOCAADDRCTL_POLICY:
1023                 return (add_addrsel_policyent(&ent0));
1024         case SIOCDADDRCTL_POLICY:
1025                 return (delete_addrsel_policyent(&ent0));
1026         }
1027
1028         return (0);             /* XXX: compromise compilers */
1029 }
1030
1031 /*
1032  * The followings are implementation of the policy table using a
1033  * simple tail queue.
1034  * XXX such details should be hidden.
1035  * XXX implementation using binary tree should be more efficient.
1036  */
1037 struct addrsel_policyent {
1038         TAILQ_ENTRY(addrsel_policyent) ape_entry;
1039         struct in6_addrpolicy ape_policy;
1040 };
1041
1042 TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
1043
1044 static VNET_DEFINE(struct addrsel_policyhead, addrsel_policytab);
1045 #define V_addrsel_policytab             VNET(addrsel_policytab)
1046
1047 static void
1048 init_policy_queue(void)
1049 {
1050
1051         TAILQ_INIT(&V_addrsel_policytab);
1052 }
1053
1054 static int
1055 add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
1056 {
1057         struct addrsel_policyent *new, *pol;
1058
1059         new = malloc(sizeof(*new), M_IFADDR,
1060                M_WAITOK);
1061         ADDRSEL_XLOCK();
1062         ADDRSEL_LOCK();
1063
1064         /* duplication check */
1065         TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1066                 if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
1067                                        &pol->ape_policy.addr.sin6_addr) &&
1068                     IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
1069                                        &pol->ape_policy.addrmask.sin6_addr)) {
1070                         ADDRSEL_UNLOCK();
1071                         ADDRSEL_XUNLOCK();
1072                         free(new, M_IFADDR);
1073                         return (EEXIST);        /* or override it? */
1074                 }
1075         }
1076
1077         bzero(new, sizeof(*new));
1078
1079         /* XXX: should validate entry */
1080         new->ape_policy = *newpolicy;
1081
1082         TAILQ_INSERT_TAIL(&V_addrsel_policytab, new, ape_entry);
1083         ADDRSEL_UNLOCK();
1084         ADDRSEL_XUNLOCK();
1085
1086         return (0);
1087 }
1088
1089 static int
1090 delete_addrsel_policyent(struct in6_addrpolicy *key)
1091 {
1092         struct addrsel_policyent *pol;
1093
1094         ADDRSEL_XLOCK();
1095         ADDRSEL_LOCK();
1096
1097         /* search for the entry in the table */
1098         TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1099                 if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
1100                     &pol->ape_policy.addr.sin6_addr) &&
1101                     IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
1102                     &pol->ape_policy.addrmask.sin6_addr)) {
1103                         break;
1104                 }
1105         }
1106         if (pol == NULL) {
1107                 ADDRSEL_UNLOCK();
1108                 ADDRSEL_XUNLOCK();
1109                 return (ESRCH);
1110         }
1111
1112         TAILQ_REMOVE(&V_addrsel_policytab, pol, ape_entry);
1113         ADDRSEL_UNLOCK();
1114         ADDRSEL_XUNLOCK();
1115
1116         return (0);
1117 }
1118
1119 static int
1120 walk_addrsel_policy(int (*callback)(struct in6_addrpolicy *, void *),
1121     void *w)
1122 {
1123         struct addrsel_policyent *pol;
1124         int error = 0;
1125
1126         ADDRSEL_SLOCK();
1127         TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1128                 if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
1129                         ADDRSEL_SUNLOCK();
1130                         return (error);
1131                 }
1132         }
1133         ADDRSEL_SUNLOCK();
1134         return (error);
1135 }
1136
1137 static int
1138 dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
1139 {
1140         int error = 0;
1141         struct walkarg *w = arg;
1142
1143         error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
1144
1145         return (error);
1146 }
1147
1148 static struct in6_addrpolicy *
1149 match_addrsel_policy(struct sockaddr_in6 *key)
1150 {
1151         struct addrsel_policyent *pent;
1152         struct in6_addrpolicy *bestpol = NULL, *pol;
1153         int matchlen, bestmatchlen = -1;
1154         u_char *mp, *ep, *k, *p, m;
1155
1156         TAILQ_FOREACH(pent, &V_addrsel_policytab, ape_entry) {
1157                 matchlen = 0;
1158
1159                 pol = &pent->ape_policy;
1160                 mp = (u_char *)&pol->addrmask.sin6_addr;
1161                 ep = mp + 16;   /* XXX: scope field? */
1162                 k = (u_char *)&key->sin6_addr;
1163                 p = (u_char *)&pol->addr.sin6_addr;
1164                 for (; mp < ep && *mp; mp++, k++, p++) {
1165                         m = *mp;
1166                         if ((*k & m) != *p)
1167                                 goto next; /* not match */
1168                         if (m == 0xff) /* short cut for a typical case */
1169                                 matchlen += 8;
1170                         else {
1171                                 while (m >= 0x80) {
1172                                         matchlen++;
1173                                         m <<= 1;
1174                                 }
1175                         }
1176                 }
1177
1178                 /* matched.  check if this is better than the current best. */
1179                 if (bestpol == NULL ||
1180                     matchlen > bestmatchlen) {
1181                         bestpol = pol;
1182                         bestmatchlen = matchlen;
1183                 }
1184
1185           next:
1186                 continue;
1187         }
1188
1189         return (bestpol);
1190 }