2 /* $KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $ */
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * Copyright (c) 1982, 1986, 1991, 1993
35 * The Regents of the University of California. All rights reserved.
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 4. Neither the name of the University nor the names of its contributors
46 * may be used to endorse or promote products derived from this software
47 * without specific prior written permission.
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
61 * @(#)in_pcb.c 8.2 (Berkeley) 1/4/94
65 #include "opt_inet6.h"
67 #include <sys/param.h>
68 #include <sys/systm.h>
69 #include <sys/malloc.h>
71 #include <sys/protosw.h>
72 #include <sys/socket.h>
73 #include <sys/socketvar.h>
74 #include <sys/sockio.h>
75 #include <sys/sysctl.h>
76 #include <sys/errno.h>
78 #include <sys/kernel.h>
82 #include <net/route.h>
84 #include <netinet/in.h>
85 #include <netinet/in_var.h>
86 #include <netinet/in_systm.h>
87 #include <netinet/ip.h>
88 #include <netinet/in_pcb.h>
89 #include <netinet6/in6_var.h>
90 #include <netinet/ip6.h>
91 #include <netinet6/in6_pcb.h>
92 #include <netinet6/ip6_var.h>
93 #include <netinet6/scope6_var.h>
94 #include <netinet6/nd6.h>
96 #include <net/net_osdep.h>
98 static struct mtx addrsel_lock;
99 #define ADDRSEL_LOCK_INIT() mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
100 #define ADDRSEL_LOCK() mtx_lock(&addrsel_lock)
101 #define ADDRSEL_UNLOCK() mtx_unlock(&addrsel_lock)
102 #define ADDRSEL_LOCK_ASSERT() mtx_assert(&addrsel_lock, MA_OWNED)
104 static struct sx addrsel_sxlock;
105 #define ADDRSEL_SXLOCK_INIT() sx_init(&addrsel_sxlock, "addrsel_sxlock")
106 #define ADDRSEL_SLOCK() sx_slock(&addrsel_sxlock)
107 #define ADDRSEL_SUNLOCK() sx_sunlock(&addrsel_sxlock)
108 #define ADDRSEL_XLOCK() sx_xlock(&addrsel_sxlock)
109 #define ADDRSEL_XUNLOCK() sx_xunlock(&addrsel_sxlock)
111 #define ADDR_LABEL_NOTAPP (-1)
112 struct in6_addrpolicy defaultaddrpolicy;
114 int ip6_prefer_tempaddr = 0;
116 static int selectroute __P((struct sockaddr_in6 *, struct ip6_pktopts *,
117 struct ip6_moptions *, struct route_in6 *, struct ifnet **,
118 struct rtentry **, int, int));
119 static int in6_selectif __P((struct sockaddr_in6 *, struct ip6_pktopts *,
120 struct ip6_moptions *, struct route_in6 *ro, struct ifnet **));
122 static struct in6_addrpolicy *lookup_addrsel_policy __P((struct sockaddr_in6 *));
124 static void init_policy_queue __P((void));
125 static int add_addrsel_policyent __P((struct in6_addrpolicy *));
126 static int delete_addrsel_policyent __P((struct in6_addrpolicy *));
127 static int walk_addrsel_policy __P((int (*)(struct in6_addrpolicy *, void *),
129 static int dump_addrsel_policyent __P((struct in6_addrpolicy *, void *));
130 static struct in6_addrpolicy *match_addrsel_policy __P((struct sockaddr_in6 *));
133 * Return an IPv6 address, which is the most appropriate for a given
134 * destination and user specified options.
135 * If necessary, this function lookups the routing table and returns
136 * an entry to the caller for later use.
138 #define REPLACE(r) do {\
139 if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
140 sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
141 ip6stat.ip6s_sources_rule[(r)]++; \
142 /* printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
145 #define NEXT(r) do {\
146 if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
147 sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
148 ip6stat.ip6s_sources_rule[(r)]++; \
149 /* printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
150 goto next; /* XXX: we can't use 'continue' here */ \
152 #define BREAK(r) do { \
153 if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
154 sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
155 ip6stat.ip6s_sources_rule[(r)]++; \
156 goto out; /* XXX: we can't use 'break' here */ \
160 in6_selectsrc(dstsock, opts, mopts, ro, laddr, ifpp, errorp)
161 struct sockaddr_in6 *dstsock;
162 struct ip6_pktopts *opts;
163 struct ip6_moptions *mopts;
164 struct route_in6 *ro;
165 struct in6_addr *laddr;
170 struct ifnet *ifp = NULL;
171 struct in6_ifaddr *ia = NULL, *ia_best = NULL;
172 struct in6_pktinfo *pi = NULL;
173 int dst_scope = -1, best_scope = -1, best_matchlen = -1;
174 struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
178 dst = dstsock->sin6_addr; /* make a copy for local operation */
184 * If the source address is explicitly specified by the caller,
185 * check if the requested source address is indeed a unicast address
186 * assigned to the node, and can be used as the packet's source
187 * address. If everything is okay, use the address as source.
189 if (opts && (pi = opts->ip6po_pktinfo) &&
190 !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
191 struct sockaddr_in6 srcsock;
192 struct in6_ifaddr *ia6;
194 /* get the outgoing interface */
195 if ((*errorp = in6_selectif(dstsock, opts, mopts, ro, &ifp))
201 * determine the appropriate zone id of the source based on
202 * the zone of the destination and the outgoing interface.
203 * If the specified address is ambiguous wrt the scope zone,
204 * the interface must be specified; otherwise, ifa_ifwithaddr()
205 * will fail matching the address.
207 bzero(&srcsock, sizeof(srcsock));
208 srcsock.sin6_family = AF_INET6;
209 srcsock.sin6_len = sizeof(srcsock);
210 srcsock.sin6_addr = pi->ipi6_addr;
212 *errorp = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
217 ia6 = (struct in6_ifaddr *)ifa_ifwithaddr((struct sockaddr *)(&srcsock));
219 (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
220 *errorp = EADDRNOTAVAIL;
223 pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
226 return (&ia6->ia_addr.sin6_addr);
230 * Otherwise, if the socket has already bound the source, just use it.
232 if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
236 * If the address is not specified, choose the best one based on
237 * the outgoing interface and the destination address.
239 /* get the outgoing interface */
240 if ((*errorp = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
244 if (ifp == NULL) /* this should not happen */
245 panic("in6_selectsrc: NULL ifp");
247 *errorp = in6_setscope(&dst, ifp, &odstzone);
251 for (ia = in6_ifaddr; ia; ia = ia->ia_next) {
252 int new_scope = -1, new_matchlen = -1;
253 struct in6_addrpolicy *new_policy = NULL;
254 u_int32_t srczone, osrczone, dstzone;
256 struct ifnet *ifp1 = ia->ia_ifp;
259 * We'll never take an address that breaks the scope zone
260 * of the destination. We also skip an address if its zone
261 * does not contain the outgoing interface.
262 * XXX: we should probably use sin6_scope_id here.
264 if (in6_setscope(&dst, ifp1, &dstzone) ||
265 odstzone != dstzone) {
268 src = ia->ia_addr.sin6_addr;
269 if (in6_setscope(&src, ifp, &osrczone) ||
270 in6_setscope(&src, ifp1, &srczone) ||
271 osrczone != srczone) {
275 /* avoid unusable addresses */
277 (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
280 if (!ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
283 /* Rule 1: Prefer same address */
284 if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
286 BREAK(1); /* there should be no better candidate */
292 /* Rule 2: Prefer appropriate scope */
294 dst_scope = in6_addrscope(&dst);
295 new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
296 if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
297 if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
300 } else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
301 if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
307 * Rule 3: Avoid deprecated addresses. Note that the case of
308 * !ip6_use_deprecated is already rejected above.
310 if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
312 if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
315 /* Rule 4: Prefer home addresses */
317 * XXX: This is a TODO. We should probably merge the MIP6
321 /* Rule 5: Prefer outgoing interface */
322 if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
324 if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
328 * Rule 6: Prefer matching label
329 * Note that best_policy should be non-NULL here.
331 if (dst_policy == NULL)
332 dst_policy = lookup_addrsel_policy(dstsock);
333 if (dst_policy->label != ADDR_LABEL_NOTAPP) {
334 new_policy = lookup_addrsel_policy(&ia->ia_addr);
335 if (dst_policy->label == best_policy->label &&
336 dst_policy->label != new_policy->label)
338 if (dst_policy->label != best_policy->label &&
339 dst_policy->label == new_policy->label)
344 * Rule 7: Prefer public addresses.
345 * We allow users to reverse the logic by configuring
346 * a sysctl variable, so that privacy conscious users can
347 * always prefer temporary addresses.
350 opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
351 prefer_tempaddr = ip6_prefer_tempaddr;
352 } else if (opts->ip6po_prefer_tempaddr ==
353 IP6PO_TEMPADDR_NOTPREFER) {
357 if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
358 (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
364 if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
365 !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
373 * Rule 8: prefer addresses on alive interfaces.
374 * This is a KAME specific rule.
376 if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
377 !(ia->ia_ifp->if_flags & IFF_UP))
379 if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
380 (ia->ia_ifp->if_flags & IFF_UP))
384 * Rule 14: Use longest matching prefix.
385 * Note: in the address selection draft, this rule is
386 * documented as "Rule 8". However, since it is also
387 * documented that this rule can be overridden, we assign
388 * a large number so that it is easy to assign smaller numbers
389 * to more preferred rules.
391 new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
392 if (best_matchlen < new_matchlen)
394 if (new_matchlen < best_matchlen)
397 /* Rule 15 is reserved. */
400 * Last resort: just keep the current candidate.
401 * Or, do we need more rules?
407 best_scope = (new_scope >= 0 ? new_scope :
408 in6_addrscope(&ia_best->ia_addr.sin6_addr));
409 best_policy = (new_policy ? new_policy :
410 lookup_addrsel_policy(&ia_best->ia_addr));
411 best_matchlen = (new_matchlen >= 0 ? new_matchlen :
412 in6_matchlen(&ia_best->ia_addr.sin6_addr,
422 if ((ia = ia_best) == NULL) {
423 *errorp = EADDRNOTAVAIL;
430 return (&ia->ia_addr.sin6_addr);
434 selectroute(dstsock, opts, mopts, ro, retifp, retrt, clone, norouteok)
435 struct sockaddr_in6 *dstsock;
436 struct ip6_pktopts *opts;
437 struct ip6_moptions *mopts;
438 struct route_in6 *ro;
439 struct ifnet **retifp;
440 struct rtentry **retrt;
441 int clone; /* meaningful only for bsdi and freebsd. */
445 struct ifnet *ifp = NULL;
446 struct rtentry *rt = NULL;
447 struct sockaddr_in6 *sin6_next;
448 struct in6_pktinfo *pi = NULL;
449 struct in6_addr *dst = &dstsock->sin6_addr;
452 if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
453 dstsock->sin6_addr.s6_addr32[1] == 0 &&
454 !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
455 printf("in6_selectroute: strange destination %s\n",
456 ip6_sprintf(&dstsock->sin6_addr));
458 printf("in6_selectroute: destination = %s%%%d\n",
459 ip6_sprintf(&dstsock->sin6_addr),
460 dstsock->sin6_scope_id); /* for debug */
464 /* If the caller specify the outgoing interface explicitly, use it. */
465 if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
466 /* XXX boundary check is assumed to be already done. */
467 ifp = ifnet_byindex(pi->ipi6_ifindex);
469 (norouteok || retrt == NULL ||
470 IN6_IS_ADDR_MULTICAST(dst))) {
472 * we do not have to check or get the route for
481 * If the destination address is a multicast address and the outgoing
482 * interface for the address is specified by the caller, use it.
484 if (IN6_IS_ADDR_MULTICAST(dst) &&
485 mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
486 goto done; /* we do not need a route for multicast. */
491 * If the next hop address for the packet is specified by the caller,
492 * use it as the gateway.
494 if (opts && opts->ip6po_nexthop) {
495 struct route_in6 *ron;
497 sin6_next = satosin6(opts->ip6po_nexthop);
499 /* at this moment, we only support AF_INET6 next hops */
500 if (sin6_next->sin6_family != AF_INET6) {
501 error = EAFNOSUPPORT; /* or should we proceed? */
506 * If the next hop is an IPv6 address, then the node identified
507 * by that address must be a neighbor of the sending host.
509 ron = &opts->ip6po_nextroute;
511 (ron->ro_rt->rt_flags & (RTF_UP | RTF_LLINFO)) !=
512 (RTF_UP | RTF_LLINFO)) ||
513 !IN6_ARE_ADDR_EQUAL(&satosin6(&ron->ro_dst)->sin6_addr,
514 &sin6_next->sin6_addr)) {
519 *satosin6(&ron->ro_dst) = *sin6_next;
521 if (ron->ro_rt == NULL) {
522 rtalloc((struct route *)ron); /* multi path case? */
523 if (ron->ro_rt == NULL ||
524 !(ron->ro_rt->rt_flags & RTF_LLINFO)) {
529 error = EHOSTUNREACH;
537 * When cloning is required, try to allocate a route to the
538 * destination so that the caller can store path MTU
546 * Use a cached route if it exists and is valid, else try to allocate
547 * a new one. Note that we should check the address family of the
548 * cached destination, in case of sharing the cache with IPv4.
552 (!(ro->ro_rt->rt_flags & RTF_UP) ||
553 ((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
554 !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
557 ro->ro_rt = (struct rtentry *)NULL;
559 if (ro->ro_rt == (struct rtentry *)NULL) {
560 struct sockaddr_in6 *sa6;
562 /* No route yet, so try to acquire one */
563 bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
564 sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
566 sa6->sin6_scope_id = 0;
569 rtalloc((struct route *)ro);
571 ro->ro_rt = rtalloc1(&((struct route *)ro)
574 RT_UNLOCK(ro->ro_rt);
579 * do not care about the result if we have the nexthop
580 * explicitly specified.
582 if (opts && opts->ip6po_nexthop)
586 ifp = ro->ro_rt->rt_ifp;
588 if (ifp == NULL) { /* can this really happen? */
593 if (ro->ro_rt == NULL)
594 error = EHOSTUNREACH;
598 * Check if the outgoing interface conflicts with
599 * the interface specified by ipi6_ifindex (if specified).
600 * Note that loopback interface is always okay.
601 * (this may happen when we are sending a packet to one of
602 * our own addresses.)
604 if (ifp && opts && opts->ip6po_pktinfo &&
605 opts->ip6po_pktinfo->ipi6_ifindex) {
606 if (!(ifp->if_flags & IFF_LOOPBACK) &&
608 opts->ip6po_pktinfo->ipi6_ifindex) {
609 error = EHOSTUNREACH;
616 if (ifp == NULL && rt == NULL) {
618 * This can happen if the caller did not pass a cached route
619 * nor any other hints. We treat this case an error.
621 error = EHOSTUNREACH;
623 if (error == EHOSTUNREACH)
624 ip6stat.ip6s_noroute++;
629 *retrt = rt; /* rt may be NULL */
635 in6_selectif(dstsock, opts, mopts, ro, retifp)
636 struct sockaddr_in6 *dstsock;
637 struct ip6_pktopts *opts;
638 struct ip6_moptions *mopts;
639 struct route_in6 *ro;
640 struct ifnet **retifp;
643 struct route_in6 sro;
644 struct rtentry *rt = NULL;
647 bzero(&sro, sizeof(sro));
651 if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
653 if (rt && rt == sro.ro_rt)
659 * do not use a rejected or black hole route.
660 * XXX: this check should be done in the L2 output routine.
661 * However, if we skipped this check here, we'd see the following
663 * - install a rejected route for a scoped address prefix
665 * - send a packet to a destination that matches the scoped prefix,
666 * with ambiguity about the scope zone.
667 * - pick the outgoing interface from the route, and disambiguate the
668 * scope zone with the interface.
669 * - ip6_output() would try to get another route with the "new"
670 * destination, which may be valid.
671 * - we'd see no error on output.
672 * Although this may not be very harmful, it should still be confusing.
673 * We thus reject the case here.
675 if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE))) {
676 int flags = (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
678 if (rt && rt == sro.ro_rt)
684 * Adjust the "outgoing" interface. If we're going to loop the packet
685 * back to ourselves, the ifp would be the loopback interface.
686 * However, we'd rather know the interface associated to the
687 * destination address (which should probably be one of our own
690 if (rt && rt->rt_ifa && rt->rt_ifa->ifa_ifp)
691 *retifp = rt->rt_ifa->ifa_ifp;
693 if (rt && rt == sro.ro_rt)
699 in6_selectroute(dstsock, opts, mopts, ro, retifp, retrt, clone)
700 struct sockaddr_in6 *dstsock;
701 struct ip6_pktopts *opts;
702 struct ip6_moptions *mopts;
703 struct route_in6 *ro;
704 struct ifnet **retifp;
705 struct rtentry **retrt;
706 int clone; /* meaningful only for bsdi and freebsd. */
708 return (selectroute(dstsock, opts, mopts, ro, retifp,
713 * Default hop limit selection. The precedence is as follows:
714 * 1. Hoplimit value specified via ioctl.
715 * 2. (If the outgoing interface is detected) the current
716 * hop limit of the interface specified by router advertisement.
717 * 3. The system default hoplimit.
720 in6_selecthlim(in6p, ifp)
724 if (in6p && in6p->in6p_hops >= 0)
725 return (in6p->in6p_hops);
727 return (ND_IFINFO(ifp)->chlim);
728 else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
729 struct route_in6 ro6;
732 bzero(&ro6, sizeof(ro6));
733 ro6.ro_dst.sin6_family = AF_INET6;
734 ro6.ro_dst.sin6_len = sizeof(struct sockaddr_in6);
735 ro6.ro_dst.sin6_addr = in6p->in6p_faddr;
736 rtalloc((struct route *)&ro6);
738 lifp = ro6.ro_rt->rt_ifp;
741 return (ND_IFINFO(lifp)->chlim);
743 return (ip6_defhlim);
745 return (ip6_defhlim);
749 * XXX: this is borrowed from in6_pcbbind(). If possible, we should
750 * share this function by all *bsd*...
753 in6_pcbsetport(laddr, inp, cred)
754 struct in6_addr *laddr;
758 struct socket *so = inp->inp_socket;
759 u_int16_t lport = 0, first, last, *lastport;
760 int count, error = 0, wild = 0;
761 struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
763 /* XXX: this is redundant when called from in6_pcbbind */
764 if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
765 wild = INPLOOKUP_WILDCARD;
767 inp->inp_flags |= INP_ANONPORT;
769 if (inp->inp_flags & INP_HIGHPORT) {
770 first = ipport_hifirstauto; /* sysctl */
771 last = ipport_hilastauto;
772 lastport = &pcbinfo->lasthi;
773 } else if (inp->inp_flags & INP_LOWPORT) {
774 if ((error = suser_cred(cred, 0)))
776 first = ipport_lowfirstauto; /* 1023 */
777 last = ipport_lowlastauto; /* 600 */
778 lastport = &pcbinfo->lastlow;
780 first = ipport_firstauto; /* sysctl */
781 last = ipport_lastauto;
782 lastport = &pcbinfo->lastport;
785 * Simple check to ensure all ports are not used up causing
788 * We split the two cases (up and down) so that the direction
789 * is not being tested on each round of the loop.
795 count = first - last;
798 if (count-- < 0) { /* completely used? */
800 * Undo any address bind that may have
803 inp->in6p_laddr = in6addr_any;
807 if (*lastport > first || *lastport < last)
809 lport = htons(*lastport);
810 } while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
816 count = last - first;
819 if (count-- < 0) { /* completely used? */
821 * Undo any address bind that may have
824 inp->in6p_laddr = in6addr_any;
828 if (*lastport < first || *lastport > last)
830 lport = htons(*lastport);
831 } while (in6_pcblookup_local(pcbinfo,
832 &inp->in6p_laddr, lport, wild));
835 inp->inp_lport = lport;
836 if (in_pcbinshash(inp) != 0) {
837 inp->in6p_laddr = in6addr_any;
846 addrsel_policy_init()
849 ADDRSEL_SXLOCK_INIT();
853 /* initialize the "last resort" policy */
854 bzero(&defaultaddrpolicy, sizeof(defaultaddrpolicy));
855 defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
858 static struct in6_addrpolicy *
859 lookup_addrsel_policy(key)
860 struct sockaddr_in6 *key;
862 struct in6_addrpolicy *match = NULL;
865 match = match_addrsel_policy(key);
868 match = &defaultaddrpolicy;
877 * Subroutines to manage the address selection policy table via sysctl.
880 struct sysctl_req *w_req;
883 static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
884 SYSCTL_DECL(_net_inet6_ip6);
885 SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
886 CTLFLAG_RD, in6_src_sysctl, "");
889 in6_src_sysctl(SYSCTL_HANDLER_ARGS)
896 bzero(&w, sizeof(w));
899 return (walk_addrsel_policy(dump_addrsel_policyent, &w));
903 in6_src_ioctl(cmd, data)
908 struct in6_addrpolicy ent0;
910 if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
911 return (EOPNOTSUPP); /* check for safety */
913 ent0 = *(struct in6_addrpolicy *)data;
915 if (ent0.label == ADDR_LABEL_NOTAPP)
917 /* check if the prefix mask is consecutive. */
918 if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
920 /* clear trailing garbages (if any) of the prefix address. */
921 for (i = 0; i < 4; i++) {
922 ent0.addr.sin6_addr.s6_addr32[i] &=
923 ent0.addrmask.sin6_addr.s6_addr32[i];
928 case SIOCAADDRCTL_POLICY:
929 return (add_addrsel_policyent(&ent0));
930 case SIOCDADDRCTL_POLICY:
931 return (delete_addrsel_policyent(&ent0));
934 return (0); /* XXX: compromise compilers */
938 * The followings are implementation of the policy table using a
940 * XXX such details should be hidden.
941 * XXX implementation using binary tree should be more efficient.
943 struct addrsel_policyent {
944 TAILQ_ENTRY(addrsel_policyent) ape_entry;
945 struct in6_addrpolicy ape_policy;
948 TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
950 struct addrsel_policyhead addrsel_policytab;
955 TAILQ_INIT(&addrsel_policytab);
959 add_addrsel_policyent(newpolicy)
960 struct in6_addrpolicy *newpolicy;
962 struct addrsel_policyent *new, *pol;
964 MALLOC(new, struct addrsel_policyent *, sizeof(*new), M_IFADDR,
969 /* duplication check */
970 TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
971 if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
972 &pol->ape_policy.addr.sin6_addr) &&
973 IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
974 &pol->ape_policy.addrmask.sin6_addr)) {
978 return (EEXIST); /* or override it? */
982 bzero(new, sizeof(*new));
984 /* XXX: should validate entry */
985 new->ape_policy = *newpolicy;
987 TAILQ_INSERT_TAIL(&addrsel_policytab, new, ape_entry);
995 delete_addrsel_policyent(key)
996 struct in6_addrpolicy *key;
998 struct addrsel_policyent *pol;
1003 /* search for the entry in the table */
1004 TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
1005 if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
1006 &pol->ape_policy.addr.sin6_addr) &&
1007 IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
1008 &pol->ape_policy.addrmask.sin6_addr)) {
1018 TAILQ_REMOVE(&addrsel_policytab, pol, ape_entry);
1026 walk_addrsel_policy(callback, w)
1027 int (*callback) __P((struct in6_addrpolicy *, void *));
1030 struct addrsel_policyent *pol;
1034 TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
1035 if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
1045 dump_addrsel_policyent(pol, arg)
1046 struct in6_addrpolicy *pol;
1050 struct walkarg *w = arg;
1052 error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
1057 static struct in6_addrpolicy *
1058 match_addrsel_policy(key)
1059 struct sockaddr_in6 *key;
1061 struct addrsel_policyent *pent;
1062 struct in6_addrpolicy *bestpol = NULL, *pol;
1063 int matchlen, bestmatchlen = -1;
1064 u_char *mp, *ep, *k, *p, m;
1066 TAILQ_FOREACH(pent, &addrsel_policytab, ape_entry) {
1069 pol = &pent->ape_policy;
1070 mp = (u_char *)&pol->addrmask.sin6_addr;
1071 ep = mp + 16; /* XXX: scope field? */
1072 k = (u_char *)&key->sin6_addr;
1073 p = (u_char *)&pol->addr.sin6_addr;
1074 for (; mp < ep && *mp; mp++, k++, p++) {
1077 goto next; /* not match */
1078 if (m == 0xff) /* short cut for a typical case */
1088 /* matched. check if this is better than the current best. */
1089 if (bestpol == NULL ||
1090 matchlen > bestmatchlen) {
1092 bestmatchlen = matchlen;