sys/netinet6/udp6_usrreq.c

   1 /*-
   2  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
   3  * Copyright (c) 2010-2011 Juniper Networks, Inc.
   4  * Copyright (c) 2014 Kevin Lo
   5  * All rights reserved.
   6  *
   7  * Portions of this software were developed by Robert N. M. Watson under
   8  * contract to Juniper Networks, Inc.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  * 3. Neither the name of the project nor the names of its contributors
  19  *    may be used to endorse or promote products derived from this software
  20  *    without specific prior written permission.
  21  *
  22  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
  23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
  26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  32  * SUCH DAMAGE.
  33  *
  34  *      $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
  35  *      $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
  36  */
  37
  38 /*-
  39  * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
  40  *      The Regents of the University of California.
  41  * All rights reserved.
  42  *
  43  * Redistribution and use in source and binary forms, with or without
  44  * modification, are permitted provided that the following conditions
  45  * are met:
  46  * 1. Redistributions of source code must retain the above copyright
  47  *    notice, this list of conditions and the following disclaimer.
  48  * 2. Redistributions in binary form must reproduce the above copyright
  49  *    notice, this list of conditions and the following disclaimer in the
  50  *    documentation and/or other materials provided with the distribution.
  51  * 4. Neither the name of the University nor the names of its contributors
  52  *    may be used to endorse or promote products derived from this software
  53  *    without specific prior written permission.
  54  *
  55  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  56  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  57  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  58  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  59  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  60  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  61  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  62  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  63  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  64  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  65  * SUCH DAMAGE.
  66  *
  67  *      @(#)udp_usrreq.c        8.6 (Berkeley) 5/23/95
  68  */
  69
  70 #include <sys/cdefs.h>
  71 __FBSDID("$FreeBSD$");
  72
  73 #include "opt_inet.h"
  74 #include "opt_inet6.h"
  75 #include "opt_ipfw.h"
  76 #include "opt_ipsec.h"
  77 #include "opt_rss.h"
  78
  79 #include <sys/param.h>
  80 #include <sys/jail.h>
  81 #include <sys/kernel.h>
  82 #include <sys/lock.h>
  83 #include <sys/mbuf.h>
  84 #include <sys/priv.h>
  85 #include <sys/proc.h>
  86 #include <sys/protosw.h>
  87 #include <sys/sdt.h>
  88 #include <sys/signalvar.h>
  89 #include <sys/socket.h>
  90 #include <sys/socketvar.h>
  91 #include <sys/sx.h>
  92 #include <sys/sysctl.h>
  93 #include <sys/syslog.h>
  94 #include <sys/systm.h>
  95
  96 #include <net/if.h>
  97 #include <net/if_var.h>
  98 #include <net/if_types.h>
  99 #include <net/route.h>
 100
 101 #include <netinet/in.h>
 102 #include <netinet/in_kdtrace.h>
 103 #include <netinet/in_pcb.h>
 104 #include <netinet/in_systm.h>
 105 #include <netinet/in_var.h>
 106 #include <netinet/ip.h>
 107 #include <netinet/ip_icmp.h>
 108 #include <netinet/ip6.h>
 109 #include <netinet/icmp_var.h>
 110 #include <netinet/icmp6.h>
 111 #include <netinet/ip_var.h>
 112 #include <netinet/udp.h>
 113 #include <netinet/udp_var.h>
 114 #include <netinet/udplite.h>
 115 #include <netinet/in_rss.h>
 116
 117 #include <netinet6/ip6protosw.h>
 118 #include <netinet6/ip6_var.h>
 119 #include <netinet6/in6_pcb.h>
 120 #include <netinet6/udp6_var.h>
 121 #include <netinet6/scope6_var.h>
 122
 123 #ifdef IPSEC
 124 #include <netipsec/ipsec.h>
 125 #include <netipsec/ipsec6.h>
 126 #endif /* IPSEC */
 127
 128 #include <security/mac/mac_framework.h>
 129
 130 /*
 131  * UDP protocol implementation.
 132  * Per RFC 768, August, 1980.
 133  */
 134
 135 extern struct protosw   inetsw[];
 136 static void             udp6_detach(struct socket *so);
 137
 138 static void
 139 udp6_append(struct inpcb *inp, struct mbuf *n, int off,
 140     struct sockaddr_in6 *fromsa)
 141 {
 142         struct socket *so;
 143         struct mbuf *opts;
 144         struct udpcb *up;
 145
 146         INP_LOCK_ASSERT(inp);
 147
 148         /*
 149          * Engage the tunneling protocol.
 150          */
 151         up = intoudpcb(inp);
 152         if (up->u_tun_func != NULL) {
 153                 (*up->u_tun_func)(n, off, inp, (struct sockaddr *)fromsa,
 154                     up->u_tun_ctx);
 155                 return;
 156         }
 157 #ifdef IPSEC
 158         /* Check AH/ESP integrity. */
 159         if (ipsec6_in_reject(n, inp)) {
 160                 m_freem(n);
 161                 IPSEC6STAT_INC(ips_in_polvio);
 162                 return;
 163         }
 164 #endif /* IPSEC */
 165 #ifdef MAC
 166         if (mac_inpcb_check_deliver(inp, n) != 0) {
 167                 m_freem(n);
 168                 return;
 169         }
 170 #endif
 171         opts = NULL;
 172         if (inp->inp_flags & INP_CONTROLOPTS ||
 173             inp->inp_socket->so_options & SO_TIMESTAMP)
 174                 ip6_savecontrol(inp, n, &opts);
 175         m_adj(n, off + sizeof(struct udphdr));
 176
 177         so = inp->inp_socket;
 178         SOCKBUF_LOCK(&so->so_rcv);
 179         if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
 180             opts) == 0) {
 181                 SOCKBUF_UNLOCK(&so->so_rcv);
 182                 m_freem(n);
 183                 if (opts)
 184                         m_freem(opts);
 185                 UDPSTAT_INC(udps_fullsock);
 186         } else
 187                 sorwakeup_locked(so);
 188 }
 189
 190 int
 191 udp6_input(struct mbuf **mp, int *offp, int proto)
 192 {
 193         struct mbuf *m = *mp;
 194         struct ifnet *ifp;
 195         struct ip6_hdr *ip6;
 196         struct udphdr *uh;
 197         struct inpcb *inp;
 198         struct inpcbinfo *pcbinfo;
 199         struct udpcb *up;
 200         int off = *offp;
 201         int cscov_partial;
 202         int plen, ulen;
 203         struct sockaddr_in6 fromsa;
 204         struct m_tag *fwd_tag;
 205         uint16_t uh_sum;
 206         uint8_t nxt;
 207
 208         ifp = m->m_pkthdr.rcvif;
 209         ip6 = mtod(m, struct ip6_hdr *);
 210
 211 #ifndef PULLDOWN_TEST
 212         IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
 213         ip6 = mtod(m, struct ip6_hdr *);
 214         uh = (struct udphdr *)((caddr_t)ip6 + off);
 215 #else
 216         IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
 217         if (!uh)
 218                 return (IPPROTO_DONE);
 219 #endif
 220
 221         UDPSTAT_INC(udps_ipackets);
 222
 223         /*
 224          * Destination port of 0 is illegal, based on RFC768.
 225          */
 226         if (uh->uh_dport == 0)
 227                 goto badunlocked;
 228
 229         plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
 230         ulen = ntohs((u_short)uh->uh_ulen);
 231
 232         nxt = ip6->ip6_nxt;
 233         cscov_partial = (nxt == IPPROTO_UDPLITE) ? 1 : 0;
 234         if (nxt == IPPROTO_UDPLITE) {
 235                 /* Zero means checksum over the complete packet. */
 236                 if (ulen == 0)
 237                         ulen = plen;
 238                 if (ulen == plen)
 239                         cscov_partial = 0;
 240                 if ((ulen < sizeof(struct udphdr)) || (ulen > plen)) {
 241                         /* XXX: What is the right UDPLite MIB counter? */
 242                         goto badunlocked;
 243                 }
 244                 if (uh->uh_sum == 0) {
 245                         /* XXX: What is the right UDPLite MIB counter? */
 246                         goto badunlocked;
 247                 }
 248         } else {
 249                 if ((ulen < sizeof(struct udphdr)) || (plen != ulen)) {
 250                         UDPSTAT_INC(udps_badlen);
 251                         goto badunlocked;
 252                 }
 253                 if (uh->uh_sum == 0) {
 254                         UDPSTAT_INC(udps_nosum);
 255                         goto badunlocked;
 256                 }
 257         }
 258
 259         if ((m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) &&
 260             !cscov_partial) {
 261                 if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR)
 262                         uh_sum = m->m_pkthdr.csum_data;
 263                 else
 264                         uh_sum = in6_cksum_pseudo(ip6, ulen, nxt,
 265                             m->m_pkthdr.csum_data);
 266                 uh_sum ^= 0xffff;
 267         } else
 268                 uh_sum = in6_cksum_partial(m, nxt, off, plen, ulen);
 269
 270         if (uh_sum != 0) {
 271                 UDPSTAT_INC(udps_badsum);
 272                 goto badunlocked;
 273         }
 274
 275         /*
 276          * Construct sockaddr format source address.
 277          */
 278         init_sin6(&fromsa, m);
 279         fromsa.sin6_port = uh->uh_sport;
 280
 281         pcbinfo = get_inpcbinfo(nxt);
 282         if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
 283                 struct inpcb *last;
 284                 struct inpcbhead *pcblist;
 285                 struct ip6_moptions *imo;
 286
 287                 INP_INFO_RLOCK(pcbinfo);
 288                 /*
 289                  * In the event that laddr should be set to the link-local
 290                  * address (this happens in RIPng), the multicast address
 291                  * specified in the received packet will not match laddr.  To
 292                  * handle this situation, matching is relaxed if the
 293                  * receiving interface is the same as one specified in the
 294                  * socket and if the destination multicast address matches
 295                  * one of the multicast groups specified in the socket.
 296                  */
 297
 298                 /*
 299                  * KAME note: traditionally we dropped udpiphdr from mbuf
 300                  * here.  We need udphdr for IPsec processing so we do that
 301                  * later.
 302                  */
 303                 pcblist = get_pcblist(nxt);
 304                 last = NULL;
 305                 LIST_FOREACH(inp, pcblist, inp_list) {
 306                         if ((inp->inp_vflag & INP_IPV6) == 0)
 307                                 continue;
 308                         if (inp->inp_lport != uh->uh_dport)
 309                                 continue;
 310                         if (inp->inp_fport != 0 &&
 311                             inp->inp_fport != uh->uh_sport)
 312                                 continue;
 313                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
 314                                 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
 315                                                         &ip6->ip6_dst))
 316                                         continue;
 317                         }
 318                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
 319                                 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
 320                                                         &ip6->ip6_src) ||
 321                                     inp->inp_fport != uh->uh_sport)
 322                                         continue;
 323                         }
 324
 325                         /*
 326                          * XXXRW: Because we weren't holding either the inpcb
 327                          * or the hash lock when we checked for a match
 328                          * before, we should probably recheck now that the
 329                          * inpcb lock is (supposed to be) held.
 330                          */
 331
 332                         /*
 333                          * Handle socket delivery policy for any-source
 334                          * and source-specific multicast. [RFC3678]
 335                          */
 336                         imo = inp->in6p_moptions;
 337                         if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
 338                                 struct sockaddr_in6      mcaddr;
 339                                 int                      blocked;
 340
 341                                 INP_RLOCK(inp);
 342
 343                                 bzero(&mcaddr, sizeof(struct sockaddr_in6));
 344                                 mcaddr.sin6_len = sizeof(struct sockaddr_in6);
 345                                 mcaddr.sin6_family = AF_INET6;
 346                                 mcaddr.sin6_addr = ip6->ip6_dst;
 347
 348                                 blocked = im6o_mc_filter(imo, ifp,
 349                                         (struct sockaddr *)&mcaddr,
 350                                         (struct sockaddr *)&fromsa);
 351                                 if (blocked != MCAST_PASS) {
 352                                         if (blocked == MCAST_NOTGMEMBER)
 353                                                 IP6STAT_INC(ip6s_notmember);
 354                                         if (blocked == MCAST_NOTSMEMBER ||
 355                                             blocked == MCAST_MUTED)
 356                                                 UDPSTAT_INC(udps_filtermcast);
 357                                         INP_RUNLOCK(inp); /* XXX */
 358                                         continue;
 359                                 }
 360
 361                                 INP_RUNLOCK(inp);
 362                         }
 363                         if (last != NULL) {
 364                                 struct mbuf *n;
 365
 366                                 if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
 367                                         INP_RLOCK(last);
 368                                         UDP_PROBE(receive, NULL, last, ip6,
 369                                             last, uh);
 370                                         udp6_append(last, n, off, &fromsa);
 371                                         INP_RUNLOCK(last);
 372                                 }
 373                         }
 374                         last = inp;
 375                         /*
 376                          * Don't look for additional matches if this one does
 377                          * not have either the SO_REUSEPORT or SO_REUSEADDR
 378                          * socket options set.  This heuristic avoids
 379                          * searching through all pcbs in the common case of a
 380                          * non-shared port.  It assumes that an application
 381                          * will never clear these options after setting them.
 382                          */
 383                         if ((last->inp_socket->so_options &
 384                              (SO_REUSEPORT|SO_REUSEADDR)) == 0)
 385                                 break;
 386                 }
 387
 388                 if (last == NULL) {
 389                         /*
 390                          * No matching pcb found; discard datagram.  (No need
 391                          * to send an ICMP Port Unreachable for a broadcast
 392                          * or multicast datgram.)
 393                          */
 394                         UDPSTAT_INC(udps_noport);
 395                         UDPSTAT_INC(udps_noportmcast);
 396                         goto badheadlocked;
 397                 }
 398                 INP_RLOCK(last);
 399                 INP_INFO_RUNLOCK(pcbinfo);
 400                 UDP_PROBE(receive, NULL, last, ip6, last, uh);
 401                 udp6_append(last, m, off, &fromsa);
 402                 INP_RUNLOCK(last);
 403                 return (IPPROTO_DONE);
 404         }
 405         /*
 406          * Locate pcb for datagram.
 407          */
 408
 409         /*
 410          * Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain.
 411          */
 412         if ((m->m_flags & M_IP6_NEXTHOP) &&
 413             (fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) {
 414                 struct sockaddr_in6 *next_hop6;
 415
 416                 next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1);
 417
 418                 /*
 419                  * Transparently forwarded. Pretend to be the destination.
 420                  * Already got one like this?
 421                  */
 422                 inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
 423                     uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
 424                     INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m);
 425                 if (!inp) {
 426                         /*
 427                          * It's new.  Try to find the ambushing socket.
 428                          * Because we've rewritten the destination address,
 429                          * any hardware-generated hash is ignored.
 430                          */
 431                         inp = in6_pcblookup(pcbinfo, &ip6->ip6_src,
 432                             uh->uh_sport, &next_hop6->sin6_addr,
 433                             next_hop6->sin6_port ? htons(next_hop6->sin6_port) :
 434                             uh->uh_dport, INPLOOKUP_WILDCARD |
 435                             INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif);
 436                 }
 437                 /* Remove the tag from the packet. We don't need it anymore. */
 438                 m_tag_delete(m, fwd_tag);
 439                 m->m_flags &= ~M_IP6_NEXTHOP;
 440         } else
 441                 inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
 442                     uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
 443                     INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
 444                     m->m_pkthdr.rcvif, m);
 445         if (inp == NULL) {
 446                 if (udp_log_in_vain) {
 447                         char ip6bufs[INET6_ADDRSTRLEN];
 448                         char ip6bufd[INET6_ADDRSTRLEN];
 449
 450                         log(LOG_INFO,
 451                             "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
 452                             ip6_sprintf(ip6bufd, &ip6->ip6_dst),
 453                             ntohs(uh->uh_dport),
 454                             ip6_sprintf(ip6bufs, &ip6->ip6_src),
 455                             ntohs(uh->uh_sport));
 456                 }
 457                 UDPSTAT_INC(udps_noport);
 458                 if (m->m_flags & M_MCAST) {
 459                         printf("UDP6: M_MCAST is set in a unicast packet.\n");
 460                         UDPSTAT_INC(udps_noportmcast);
 461                         goto badunlocked;
 462                 }
 463                 if (V_udp_blackhole)
 464                         goto badunlocked;
 465                 if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
 466                         goto badunlocked;
 467                 icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
 468                 return (IPPROTO_DONE);
 469         }
 470         INP_RLOCK_ASSERT(inp);
 471         up = intoudpcb(inp);
 472         if (cscov_partial) {
 473                 if (up->u_rxcslen == 0 || up->u_rxcslen > ulen) {
 474                         INP_RUNLOCK(inp);
 475                         m_freem(m);
 476                         return (IPPROTO_DONE);
 477                 }
 478         }
 479         UDP_PROBE(receive, NULL, inp, ip6, inp, uh);
 480         udp6_append(inp, m, off, &fromsa);
 481         INP_RUNLOCK(inp);
 482         return (IPPROTO_DONE);
 483
 484 badheadlocked:
 485         INP_INFO_RUNLOCK(pcbinfo);
 486 badunlocked:
 487         if (m)
 488                 m_freem(m);
 489         return (IPPROTO_DONE);
 490 }
 491
 492 static void
 493 udp6_common_ctlinput(int cmd, struct sockaddr *sa, void *d,
 494     struct inpcbinfo *pcbinfo)
 495 {
 496         struct udphdr uh;
 497         struct ip6_hdr *ip6;
 498         struct mbuf *m;
 499         int off = 0;
 500         struct ip6ctlparam *ip6cp = NULL;
 501         const struct sockaddr_in6 *sa6_src = NULL;
 502         void *cmdarg;
 503         struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
 504         struct udp_portonly {
 505                 u_int16_t uh_sport;
 506                 u_int16_t uh_dport;
 507         } *uhp;
 508
 509         if (sa->sa_family != AF_INET6 ||
 510             sa->sa_len != sizeof(struct sockaddr_in6))
 511                 return;
 512
 513         if ((unsigned)cmd >= PRC_NCMDS)
 514                 return;
 515         if (PRC_IS_REDIRECT(cmd))
 516                 notify = in6_rtchange, d = NULL;
 517         else if (cmd == PRC_HOSTDEAD)
 518                 d = NULL;
 519         else if (inet6ctlerrmap[cmd] == 0)
 520                 return;
 521
 522         /* if the parameter is from icmp6, decode it. */
 523         if (d != NULL) {
 524                 ip6cp = (struct ip6ctlparam *)d;
 525                 m = ip6cp->ip6c_m;
 526                 ip6 = ip6cp->ip6c_ip6;
 527                 off = ip6cp->ip6c_off;
 528                 cmdarg = ip6cp->ip6c_cmdarg;
 529                 sa6_src = ip6cp->ip6c_src;
 530         } else {
 531                 m = NULL;
 532                 ip6 = NULL;
 533                 cmdarg = NULL;
 534                 sa6_src = &sa6_any;
 535         }
 536
 537         if (ip6) {
 538                 /*
 539                  * XXX: We assume that when IPV6 is non NULL,
 540                  * M and OFF are valid.
 541                  */
 542
 543                 /* Check if we can safely examine src and dst ports. */
 544                 if (m->m_pkthdr.len < off + sizeof(*uhp))
 545                         return;
 546
 547                 bzero(&uh, sizeof(uh));
 548                 m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
 549
 550                 (void)in6_pcbnotify(pcbinfo, sa, uh.uh_dport,
 551                     (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
 552                     cmdarg, notify);
 553         } else
 554                 (void)in6_pcbnotify(pcbinfo, sa, 0,
 555                     (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
 556 }
 557
 558 void
 559 udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
 560 {
 561
 562         return (udp6_common_ctlinput(cmd, sa, d, &V_udbinfo));
 563 }
 564
 565 void
 566 udplite6_ctlinput(int cmd, struct sockaddr *sa, void *d)
 567 {
 568
 569         return (udp6_common_ctlinput(cmd, sa, d, &V_ulitecbinfo));
 570 }
 571
 572 static int
 573 udp6_getcred(SYSCTL_HANDLER_ARGS)
 574 {
 575         struct xucred xuc;
 576         struct sockaddr_in6 addrs[2];
 577         struct inpcb *inp;
 578         int error;
 579
 580         error = priv_check(req->td, PRIV_NETINET_GETCRED);
 581         if (error)
 582                 return (error);
 583
 584         if (req->newlen != sizeof(addrs))
 585                 return (EINVAL);
 586         if (req->oldlen != sizeof(struct xucred))
 587                 return (EINVAL);
 588         error = SYSCTL_IN(req, addrs, sizeof(addrs));
 589         if (error)
 590                 return (error);
 591         if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
 592             (error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
 593                 return (error);
 594         }
 595         inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr,
 596             addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port,
 597             INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL);
 598         if (inp != NULL) {
 599                 INP_RLOCK_ASSERT(inp);
 600                 if (inp->inp_socket == NULL)
 601                         error = ENOENT;
 602                 if (error == 0)
 603                         error = cr_canseesocket(req->td->td_ucred,
 604                             inp->inp_socket);
 605                 if (error == 0)
 606                         cru2x(inp->inp_cred, &xuc);
 607                 INP_RUNLOCK(inp);
 608         } else
 609                 error = ENOENT;
 610         if (error == 0)
 611                 error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
 612         return (error);
 613 }
 614
 615 SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
 616     0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
 617
 618 static int
 619 udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
 620     struct mbuf *control, struct thread *td)
 621 {
 622         u_int32_t ulen = m->m_pkthdr.len;
 623         u_int32_t plen = sizeof(struct udphdr) + ulen;
 624         struct ip6_hdr *ip6;
 625         struct udphdr *udp6;
 626         struct in6_addr *laddr, *faddr, in6a;
 627         struct sockaddr_in6 *sin6 = NULL;
 628         struct ifnet *oifp = NULL;
 629         int cscov_partial = 0;
 630         int scope_ambiguous = 0;
 631         u_short fport;
 632         int error = 0;
 633         uint8_t nxt;
 634         uint16_t cscov = 0;
 635         struct ip6_pktopts *optp, opt;
 636         int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
 637         int flags;
 638         struct sockaddr_in6 tmp;
 639
 640         INP_WLOCK_ASSERT(inp);
 641         INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
 642
 643         if (addr6) {
 644                 /* addr6 has been validated in udp6_send(). */
 645                 sin6 = (struct sockaddr_in6 *)addr6;
 646
 647                 /* protect *sin6 from overwrites */
 648                 tmp = *sin6;
 649                 sin6 = &tmp;
 650
 651                 /*
 652                  * Application should provide a proper zone ID or the use of
 653                  * default zone IDs should be enabled.  Unfortunately, some
 654                  * applications do not behave as it should, so we need a
 655                  * workaround.  Even if an appropriate ID is not determined,
 656                  * we'll see if we can determine the outgoing interface.  If we
 657                  * can, determine the zone ID based on the interface below.
 658                  */
 659                 if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
 660                         scope_ambiguous = 1;
 661                 if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
 662                         return (error);
 663         }
 664
 665         if (control) {
 666                 if ((error = ip6_setpktopts(control, &opt,
 667                     inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0)
 668                         goto release;
 669                 optp = &opt;
 670         } else
 671                 optp = inp->in6p_outputopts;
 672
 673         if (sin6) {
 674                 faddr = &sin6->sin6_addr;
 675
 676                 /*
 677                  * Since we saw no essential reason for calling in_pcbconnect,
 678                  * we get rid of such kind of logic, and call in6_selectsrc
 679                  * and in6_pcbsetport in order to fill in the local address
 680                  * and the local port.
 681                  */
 682                 if (sin6->sin6_port == 0) {
 683                         error = EADDRNOTAVAIL;
 684                         goto release;
 685                 }
 686
 687                 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
 688                         /* how about ::ffff:0.0.0.0 case? */
 689                         error = EISCONN;
 690                         goto release;
 691                 }
 692
 693                 fport = sin6->sin6_port; /* allow 0 port */
 694
 695                 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
 696                         if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
 697                                 /*
 698                                  * I believe we should explicitly discard the
 699                                  * packet when mapped addresses are disabled,
 700                                  * rather than send the packet as an IPv6 one.
 701                                  * If we chose the latter approach, the packet
 702                                  * might be sent out on the wire based on the
 703                                  * default route, the situation which we'd
 704                                  * probably want to avoid.
 705                                  * (20010421 jinmei@kame.net)
 706                                  */
 707                                 error = EINVAL;
 708                                 goto release;
 709                         }
 710                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
 711                             !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
 712                                 /*
 713                                  * when remote addr is an IPv4-mapped address,
 714                                  * local addr should not be an IPv6 address,
 715                                  * since you cannot determine how to map IPv6
 716                                  * source address to IPv4.
 717                                  */
 718                                 error = EINVAL;
 719                                 goto release;
 720                         }
 721
 722                         af = AF_INET;
 723                 }
 724
 725                 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
 726                         error = in6_selectsrc(sin6, optp, inp, NULL,
 727                             td->td_ucred, &oifp, &in6a);
 728                         if (error)
 729                                 goto release;
 730                         if (oifp && scope_ambiguous &&
 731                             (error = in6_setscope(&sin6->sin6_addr,
 732                             oifp, NULL))) {
 733                                 goto release;
 734                         }
 735                         laddr = &in6a;
 736                 } else
 737                         laddr = &inp->in6p_laddr;       /* XXX */
 738                 if (laddr == NULL) {
 739                         if (error == 0)
 740                                 error = EADDRNOTAVAIL;
 741                         goto release;
 742                 }
 743                 if (inp->inp_lport == 0 &&
 744                     (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) {
 745                         /* Undo an address bind that may have occurred. */
 746                         inp->in6p_laddr = in6addr_any;
 747                         goto release;
 748                 }
 749         } else {
 750                 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
 751                         error = ENOTCONN;
 752                         goto release;
 753                 }
 754                 if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
 755                         if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
 756                                 /*
 757                                  * XXX: this case would happen when the
 758                                  * application sets the V6ONLY flag after
 759                                  * connecting the foreign address.
 760                                  * Such applications should be fixed,
 761                                  * so we bark here.
 762                                  */
 763                                 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
 764                                     "option was set for a connected socket\n");
 765                                 error = EINVAL;
 766                                 goto release;
 767                         } else
 768                                 af = AF_INET;
 769                 }
 770                 laddr = &inp->in6p_laddr;
 771                 faddr = &inp->in6p_faddr;
 772                 fport = inp->inp_fport;
 773         }
 774
 775         if (af == AF_INET)
 776                 hlen = sizeof(struct ip);
 777
 778         /*
 779          * Calculate data length and get a mbuf
 780          * for UDP and IP6 headers.
 781          */
 782         M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
 783         if (m == 0) {
 784                 error = ENOBUFS;
 785                 goto release;
 786         }
 787
 788         /*
 789          * Stuff checksum and output datagram.
 790          */
 791         nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
 792             IPPROTO_UDP : IPPROTO_UDPLITE;
 793         udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
 794         udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
 795         udp6->uh_dport = fport;
 796         if (nxt == IPPROTO_UDPLITE) {
 797                 struct udpcb *up;
 798
 799                 up = intoudpcb(inp);
 800                 cscov = up->u_txcslen;
 801                 if (cscov >= plen)
 802                         cscov = 0;
 803                 udp6->uh_ulen = htons(cscov);
 804                 /*
 805                  * For UDP-Lite, checksum coverage length of zero means
 806                  * the entire UDPLite packet is covered by the checksum.
 807                  */
 808                 cscov_partial = (cscov == 0) ? 0 : 1;
 809         } else if (plen <= 0xffff)
 810                 udp6->uh_ulen = htons((u_short)plen);
 811         else
 812                 udp6->uh_ulen = 0;
 813         udp6->uh_sum = 0;
 814
 815         switch (af) {
 816         case AF_INET6:
 817                 ip6 = mtod(m, struct ip6_hdr *);
 818                 ip6->ip6_flow   = inp->inp_flow & IPV6_FLOWINFO_MASK;
 819                 ip6->ip6_vfc    &= ~IPV6_VERSION_MASK;
 820                 ip6->ip6_vfc    |= IPV6_VERSION;
 821                 ip6->ip6_plen   = htons((u_short)plen);
 822                 ip6->ip6_nxt    = nxt;
 823                 ip6->ip6_hlim   = in6_selecthlim(inp, NULL);
 824                 ip6->ip6_src    = *laddr;
 825                 ip6->ip6_dst    = *faddr;
 826
 827                 if (cscov_partial) {
 828                         if ((udp6->uh_sum = in6_cksum_partial(m, nxt,
 829                             sizeof(struct ip6_hdr), plen, cscov)) == 0)
 830                                 udp6->uh_sum = 0xffff;
 831                 } else {
 832                         udp6->uh_sum = in6_cksum_pseudo(ip6, plen, nxt, 0);
 833                         m->m_pkthdr.csum_flags = CSUM_UDP_IPV6;
 834                         m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum);
 835                 }
 836
 837                 /*
 838                  * XXX for now assume UDP is 2-tuple.
 839                  * Later on this may become configurable as 4-tuple;
 840                  * we should support that.
 841                  *
 842                  * XXX .. and we should likely cache this in the inpcb.
 843                  */
 844 #ifdef  RSS
 845                 m->m_pkthdr.flowid = rss_hash_ip6_2tuple(*faddr, *laddr);
 846                 M_HASHTYPE_SET(m, M_HASHTYPE_RSS_IPV6);
 847 #endif
 848                 flags = 0;
 849
 850 #ifdef  RSS
 851                 /*
 852                  * Don't override with the inp cached flowid.
 853                  *
 854                  * Until the whole UDP path is vetted, it may actually
 855                  * be incorrect.
 856                  */
 857                 flags |= IP_NODEFAULTFLOWID;
 858 #endif
 859
 860                 UDP_PROBE(send, NULL, inp, ip6, inp, udp6);
 861                 UDPSTAT_INC(udps_opackets);
 862                 error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions,
 863                     NULL, inp);
 864                 break;
 865         case AF_INET:
 866                 error = EAFNOSUPPORT;
 867                 goto release;
 868         }
 869         goto releaseopt;
 870
 871 release:
 872         m_freem(m);
 873
 874 releaseopt:
 875         if (control) {
 876                 ip6_clearpktopts(&opt, -1);
 877                 m_freem(control);
 878         }
 879         return (error);
 880 }
 881
 882 static void
 883 udp6_abort(struct socket *so)
 884 {
 885         struct inpcb *inp;
 886         struct inpcbinfo *pcbinfo;
 887
 888         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
 889         inp = sotoinpcb(so);
 890         KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
 891
 892 #ifdef INET
 893         if (inp->inp_vflag & INP_IPV4) {
 894                 struct pr_usrreqs *pru;
 895
 896                 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
 897                 (*pru->pru_abort)(so);
 898                 return;
 899         }
 900 #endif
 901
 902         INP_WLOCK(inp);
 903         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
 904                 INP_HASH_WLOCK(pcbinfo);
 905                 in6_pcbdisconnect(inp);
 906                 inp->in6p_laddr = in6addr_any;
 907                 INP_HASH_WUNLOCK(pcbinfo);
 908                 soisdisconnected(so);
 909         }
 910         INP_WUNLOCK(inp);
 911 }
 912
 913 static int
 914 udp6_attach(struct socket *so, int proto, struct thread *td)
 915 {
 916         struct inpcb *inp;
 917         struct inpcbinfo *pcbinfo;
 918         int error;
 919
 920         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
 921         inp = sotoinpcb(so);
 922         KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
 923
 924         if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
 925                 error = soreserve(so, udp_sendspace, udp_recvspace);
 926                 if (error)
 927                         return (error);
 928         }
 929         INP_INFO_WLOCK(pcbinfo);
 930         error = in_pcballoc(so, pcbinfo);
 931         if (error) {
 932                 INP_INFO_WUNLOCK(pcbinfo);
 933                 return (error);
 934         }
 935         inp = (struct inpcb *)so->so_pcb;
 936         inp->inp_vflag |= INP_IPV6;
 937         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
 938                 inp->inp_vflag |= INP_IPV4;
 939         inp->in6p_hops = -1;    /* use kernel default */
 940         inp->in6p_cksum = -1;   /* just to be sure */
 941         /*
 942          * XXX: ugly!!
 943          * IPv4 TTL initialization is necessary for an IPv6 socket as well,
 944          * because the socket may be bound to an IPv6 wildcard address,
 945          * which may match an IPv4-mapped IPv6 address.
 946          */
 947         inp->inp_ip_ttl = V_ip_defttl;
 948
 949         error = udp_newudpcb(inp);
 950         if (error) {
 951                 in_pcbdetach(inp);
 952                 in_pcbfree(inp);
 953                 INP_INFO_WUNLOCK(pcbinfo);
 954                 return (error);
 955         }
 956         INP_WUNLOCK(inp);
 957         INP_INFO_WUNLOCK(pcbinfo);
 958         return (0);
 959 }
 960
 961 static int
 962 udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
 963 {
 964         struct inpcb *inp;
 965         struct inpcbinfo *pcbinfo;
 966         int error;
 967
 968         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
 969         inp = sotoinpcb(so);
 970         KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
 971
 972         INP_WLOCK(inp);
 973         INP_HASH_WLOCK(pcbinfo);
 974         inp->inp_vflag &= ~INP_IPV4;
 975         inp->inp_vflag |= INP_IPV6;
 976         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
 977                 struct sockaddr_in6 *sin6_p;
 978
 979                 sin6_p = (struct sockaddr_in6 *)nam;
 980
 981                 if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
 982                         inp->inp_vflag |= INP_IPV4;
 983 #ifdef INET
 984                 else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
 985                         struct sockaddr_in sin;
 986
 987                         in6_sin6_2_sin(&sin, sin6_p);
 988                         inp->inp_vflag |= INP_IPV4;
 989                         inp->inp_vflag &= ~INP_IPV6;
 990                         error = in_pcbbind(inp, (struct sockaddr *)&sin,
 991                             td->td_ucred);
 992                         goto out;
 993                 }
 994 #endif
 995         }
 996
 997         error = in6_pcbbind(inp, nam, td->td_ucred);
 998 #ifdef INET
 999 out:
1000 #endif
1001         INP_HASH_WUNLOCK(pcbinfo);
1002         INP_WUNLOCK(inp);
1003         return (error);
1004 }
1005
1006 static void
1007 udp6_close(struct socket *so)
1008 {
1009         struct inpcb *inp;
1010         struct inpcbinfo *pcbinfo;
1011
1012         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1013         inp = sotoinpcb(so);
1014         KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
1015
1016 #ifdef INET
1017         if (inp->inp_vflag & INP_IPV4) {
1018                 struct pr_usrreqs *pru;
1019
1020                 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1021                 (*pru->pru_disconnect)(so);
1022                 return;
1023         }
1024 #endif
1025         INP_WLOCK(inp);
1026         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1027                 INP_HASH_WLOCK(pcbinfo);
1028                 in6_pcbdisconnect(inp);
1029                 inp->in6p_laddr = in6addr_any;
1030                 INP_HASH_WUNLOCK(pcbinfo);
1031                 soisdisconnected(so);
1032         }
1033         INP_WUNLOCK(inp);
1034 }
1035
1036 static int
1037 udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
1038 {
1039         struct inpcb *inp;
1040         struct inpcbinfo *pcbinfo;
1041         struct sockaddr_in6 *sin6;
1042         int error;
1043
1044         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1045         inp = sotoinpcb(so);
1046         sin6 = (struct sockaddr_in6 *)nam;
1047         KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
1048
1049         /*
1050          * XXXRW: Need to clarify locking of v4/v6 flags.
1051          */
1052         INP_WLOCK(inp);
1053 #ifdef INET
1054         if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
1055                 struct sockaddr_in sin;
1056
1057                 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) {
1058                         error = EINVAL;
1059                         goto out;
1060                 }
1061                 if (inp->inp_faddr.s_addr != INADDR_ANY) {
1062                         error = EISCONN;
1063                         goto out;
1064                 }
1065                 in6_sin6_2_sin(&sin, sin6);
1066                 inp->inp_vflag |= INP_IPV4;
1067                 inp->inp_vflag &= ~INP_IPV6;
1068                 error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
1069                 if (error != 0)
1070                         goto out;
1071                 INP_HASH_WLOCK(pcbinfo);
1072                 error = in_pcbconnect(inp, (struct sockaddr *)&sin,
1073                     td->td_ucred);
1074                 INP_HASH_WUNLOCK(pcbinfo);
1075                 if (error == 0)
1076                         soisconnected(so);
1077                 goto out;
1078         }
1079 #endif
1080         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1081                 error = EISCONN;
1082                 goto out;
1083         }
1084         inp->inp_vflag &= ~INP_IPV4;
1085         inp->inp_vflag |= INP_IPV6;
1086         error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
1087         if (error != 0)
1088                 goto out;
1089         INP_HASH_WLOCK(pcbinfo);
1090         error = in6_pcbconnect(inp, nam, td->td_ucred);
1091         INP_HASH_WUNLOCK(pcbinfo);
1092         if (error == 0)
1093                 soisconnected(so);
1094 out:
1095         INP_WUNLOCK(inp);
1096         return (error);
1097 }
1098
1099 static void
1100 udp6_detach(struct socket *so)
1101 {
1102         struct inpcb *inp;
1103         struct inpcbinfo *pcbinfo;
1104         struct udpcb *up;
1105
1106         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1107         inp = sotoinpcb(so);
1108         KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
1109
1110         INP_INFO_WLOCK(pcbinfo);
1111         INP_WLOCK(inp);
1112         up = intoudpcb(inp);
1113         KASSERT(up != NULL, ("%s: up == NULL", __func__));
1114         in_pcbdetach(inp);
1115         in_pcbfree(inp);
1116         INP_INFO_WUNLOCK(pcbinfo);
1117         udp_discardcb(up);
1118 }
1119
1120 static int
1121 udp6_disconnect(struct socket *so)
1122 {
1123         struct inpcb *inp;
1124         struct inpcbinfo *pcbinfo;
1125         int error;
1126
1127         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1128         inp = sotoinpcb(so);
1129         KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
1130
1131 #ifdef INET
1132         if (inp->inp_vflag & INP_IPV4) {
1133                 struct pr_usrreqs *pru;
1134
1135                 pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1136                 (void)(*pru->pru_disconnect)(so);
1137                 return (0);
1138         }
1139 #endif
1140
1141         INP_WLOCK(inp);
1142
1143         if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1144                 error = ENOTCONN;
1145                 goto out;
1146         }
1147
1148         INP_HASH_WLOCK(pcbinfo);
1149         in6_pcbdisconnect(inp);
1150         inp->in6p_laddr = in6addr_any;
1151         INP_HASH_WUNLOCK(pcbinfo);
1152         SOCK_LOCK(so);
1153         so->so_state &= ~SS_ISCONNECTED;                /* XXX */
1154         SOCK_UNLOCK(so);
1155 out:
1156         INP_WUNLOCK(inp);
1157         return (0);
1158 }
1159
1160 static int
1161 udp6_send(struct socket *so, int flags, struct mbuf *m,
1162     struct sockaddr *addr, struct mbuf *control, struct thread *td)
1163 {
1164         struct inpcb *inp;
1165         struct inpcbinfo *pcbinfo;
1166         int error = 0;
1167
1168         pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1169         inp = sotoinpcb(so);
1170         KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
1171
1172         INP_WLOCK(inp);
1173         if (addr) {
1174                 if (addr->sa_len != sizeof(struct sockaddr_in6)) {
1175                         error = EINVAL;
1176                         goto bad;
1177                 }
1178                 if (addr->sa_family != AF_INET6) {
1179                         error = EAFNOSUPPORT;
1180                         goto bad;
1181                 }
1182         }
1183
1184 #ifdef INET
1185         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1186                 int hasv4addr;
1187                 struct sockaddr_in6 *sin6 = 0;
1188
1189                 if (addr == 0)
1190                         hasv4addr = (inp->inp_vflag & INP_IPV4);
1191                 else {
1192                         sin6 = (struct sockaddr_in6 *)addr;
1193                         hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
1194                             ? 1 : 0;
1195                 }
1196                 if (hasv4addr) {
1197                         struct pr_usrreqs *pru;
1198
1199                         /*
1200                          * XXXRW: We release UDP-layer locks before calling
1201                          * udp_send() in order to avoid recursion.  However,
1202                          * this does mean there is a short window where inp's
1203                          * fields are unstable.  Could this lead to a
1204                          * potential race in which the factors causing us to
1205                          * select the UDPv4 output routine are invalidated?
1206                          */
1207                         INP_WUNLOCK(inp);
1208                         if (sin6)
1209                                 in6_sin6_2_sin_in_sock(addr);
1210                         pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1211                         /* addr will just be freed in sendit(). */
1212                         return ((*pru->pru_send)(so, flags, m, addr, control,
1213                             td));
1214                 }
1215         }
1216 #endif
1217 #ifdef MAC
1218         mac_inpcb_create_mbuf(inp, m);
1219 #endif
1220         INP_HASH_WLOCK(pcbinfo);
1221         error = udp6_output(inp, m, addr, control, td);
1222         INP_HASH_WUNLOCK(pcbinfo);
1223 #ifdef INET
1224 #endif
1225         INP_WUNLOCK(inp);
1226         return (error);
1227
1228 bad:
1229         INP_WUNLOCK(inp);
1230         m_freem(m);
1231         return (error);
1232 }
1233
1234 struct pr_usrreqs udp6_usrreqs = {
1235         .pru_abort =            udp6_abort,
1236         .pru_attach =           udp6_attach,
1237         .pru_bind =             udp6_bind,
1238         .pru_connect =          udp6_connect,
1239         .pru_control =          in6_control,
1240         .pru_detach =           udp6_detach,
1241         .pru_disconnect =       udp6_disconnect,
1242         .pru_peeraddr =         in6_mapped_peeraddr,
1243         .pru_send =             udp6_send,
1244         .pru_shutdown =         udp_shutdown,
1245         .pru_sockaddr =         in6_mapped_sockaddr,
1246         .pru_soreceive =        soreceive_dgram,
1247         .pru_sosend =           sosend_dgram,
1248         .pru_sosetlabel =       in_pcbsosetlabel,
1249         .pru_close =            udp6_close
1250 };