]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/netinet6/udp6_usrreq.c
Add UPDATING entries and bump version.
[FreeBSD/FreeBSD.git] / sys / netinet6 / udp6_usrreq.c
1 /*-
2  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3  * Copyright (c) 2010-2011 Juniper Networks, Inc.
4  * Copyright (c) 2014 Kevin Lo
5  * All rights reserved.
6  *
7  * Portions of this software were developed by Robert N. M. Watson under
8  * contract to Juniper Networks, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the project nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
35  *      $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
36  */
37
38 /*-
39  * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
40  *      The Regents of the University of California.
41  * All rights reserved.
42  *
43  * Redistribution and use in source and binary forms, with or without
44  * modification, are permitted provided that the following conditions
45  * are met:
46  * 1. Redistributions of source code must retain the above copyright
47  *    notice, this list of conditions and the following disclaimer.
48  * 2. Redistributions in binary form must reproduce the above copyright
49  *    notice, this list of conditions and the following disclaimer in the
50  *    documentation and/or other materials provided with the distribution.
51  * 4. Neither the name of the University nor the names of its contributors
52  *    may be used to endorse or promote products derived from this software
53  *    without specific prior written permission.
54  *
55  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
56  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
57  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
58  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
59  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
60  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
61  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
62  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
63  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
64  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
65  * SUCH DAMAGE.
66  *
67  *      @(#)udp_usrreq.c        8.6 (Berkeley) 5/23/95
68  */
69
70 #include <sys/cdefs.h>
71 __FBSDID("$FreeBSD$");
72
73 #include "opt_inet.h"
74 #include "opt_inet6.h"
75 #include "opt_ipsec.h"
76 #include "opt_rss.h"
77
78 #include <sys/param.h>
79 #include <sys/jail.h>
80 #include <sys/kernel.h>
81 #include <sys/lock.h>
82 #include <sys/mbuf.h>
83 #include <sys/priv.h>
84 #include <sys/proc.h>
85 #include <sys/protosw.h>
86 #include <sys/sdt.h>
87 #include <sys/signalvar.h>
88 #include <sys/socket.h>
89 #include <sys/socketvar.h>
90 #include <sys/sx.h>
91 #include <sys/sysctl.h>
92 #include <sys/syslog.h>
93 #include <sys/systm.h>
94
95 #include <net/if.h>
96 #include <net/if_var.h>
97 #include <net/if_types.h>
98 #include <net/route.h>
99 #include <net/rss_config.h>
100
101 #include <netinet/in.h>
102 #include <netinet/in_kdtrace.h>
103 #include <netinet/in_pcb.h>
104 #include <netinet/in_systm.h>
105 #include <netinet/in_var.h>
106 #include <netinet/ip.h>
107 #include <netinet/ip6.h>
108 #include <netinet/icmp6.h>
109 #include <netinet/ip_var.h>
110 #include <netinet/udp.h>
111 #include <netinet/udp_var.h>
112 #include <netinet/udplite.h>
113
114 #include <netinet6/ip6protosw.h>
115 #include <netinet6/ip6_var.h>
116 #include <netinet6/in6_pcb.h>
117 #include <netinet6/in6_rss.h>
118 #include <netinet6/udp6_var.h>
119 #include <netinet6/scope6_var.h>
120
121 #include <netipsec/ipsec_support.h>
122
123 #include <security/mac/mac_framework.h>
124
125 /*
126  * UDP protocol implementation.
127  * Per RFC 768, August, 1980.
128  */
129
130 extern struct protosw   inetsw[];
131 static void             udp6_detach(struct socket *so);
132
133 static int
134 udp6_append(struct inpcb *inp, struct mbuf *n, int off,
135     struct sockaddr_in6 *fromsa)
136 {
137         struct socket *so;
138         struct mbuf *opts;
139         struct udpcb *up;
140
141         INP_LOCK_ASSERT(inp);
142
143         /*
144          * Engage the tunneling protocol.
145          */
146         up = intoudpcb(inp);
147         if (up->u_tun_func != NULL) {
148                 in_pcbref(inp);
149                 INP_RUNLOCK(inp);
150                 (*up->u_tun_func)(n, off, inp, (struct sockaddr *)fromsa,
151                     up->u_tun_ctx);
152                 INP_RLOCK(inp);
153                 return (in_pcbrele_rlocked(inp));
154         }
155 #if defined(IPSEC) || defined(IPSEC_SUPPORT)
156         /* Check AH/ESP integrity. */
157         if (IPSEC_ENABLED(ipv6)) {
158                 if (IPSEC_CHECK_POLICY(ipv6, n, inp) != 0) {
159                         m_freem(n);
160                         return (0);
161                 }
162         }
163 #endif /* IPSEC */
164 #ifdef MAC
165         if (mac_inpcb_check_deliver(inp, n) != 0) {
166                 m_freem(n);
167                 return (0);
168         }
169 #endif
170         opts = NULL;
171         if (inp->inp_flags & INP_CONTROLOPTS ||
172             inp->inp_socket->so_options & SO_TIMESTAMP)
173                 ip6_savecontrol(inp, n, &opts);
174         m_adj(n, off + sizeof(struct udphdr));
175
176         so = inp->inp_socket;
177         SOCKBUF_LOCK(&so->so_rcv);
178         if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
179             opts) == 0) {
180                 SOCKBUF_UNLOCK(&so->so_rcv);
181                 m_freem(n);
182                 if (opts)
183                         m_freem(opts);
184                 UDPSTAT_INC(udps_fullsock);
185         } else
186                 sorwakeup_locked(so);
187         return (0);
188 }
189
190 int
191 udp6_input(struct mbuf **mp, int *offp, int proto)
192 {
193         struct mbuf *m = *mp;
194         struct ifnet *ifp;
195         struct ip6_hdr *ip6;
196         struct udphdr *uh;
197         struct inpcb *inp;
198         struct inpcbinfo *pcbinfo;
199         struct udpcb *up;
200         int off = *offp;
201         int cscov_partial;
202         int plen, ulen;
203         struct sockaddr_in6 fromsa;
204         struct m_tag *fwd_tag;
205         uint16_t uh_sum;
206         uint8_t nxt;
207
208         ifp = m->m_pkthdr.rcvif;
209
210 #ifndef PULLDOWN_TEST
211         IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
212         ip6 = mtod(m, struct ip6_hdr *);
213         uh = (struct udphdr *)((caddr_t)ip6 + off);
214 #else
215         IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
216         if (!uh)
217                 return (IPPROTO_DONE);
218         ip6 = mtod(m, struct ip6_hdr *);
219 #endif
220
221         UDPSTAT_INC(udps_ipackets);
222
223         /*
224          * Destination port of 0 is illegal, based on RFC768.
225          */
226         if (uh->uh_dport == 0)
227                 goto badunlocked;
228
229         plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
230         ulen = ntohs((u_short)uh->uh_ulen);
231
232         nxt = proto;
233         cscov_partial = (nxt == IPPROTO_UDPLITE) ? 1 : 0;
234         if (nxt == IPPROTO_UDPLITE) {
235                 /* Zero means checksum over the complete packet. */
236                 if (ulen == 0)
237                         ulen = plen;
238                 if (ulen == plen)
239                         cscov_partial = 0;
240                 if ((ulen < sizeof(struct udphdr)) || (ulen > plen)) {
241                         /* XXX: What is the right UDPLite MIB counter? */
242                         goto badunlocked;
243                 }
244                 if (uh->uh_sum == 0) {
245                         /* XXX: What is the right UDPLite MIB counter? */
246                         goto badunlocked;
247                 }
248         } else {
249                 if ((ulen < sizeof(struct udphdr)) || (plen != ulen)) {
250                         UDPSTAT_INC(udps_badlen);
251                         goto badunlocked;
252                 }
253                 if (uh->uh_sum == 0) {
254                         UDPSTAT_INC(udps_nosum);
255                         goto badunlocked;
256                 }
257         }
258
259         if ((m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) &&
260             !cscov_partial) {
261                 if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR)
262                         uh_sum = m->m_pkthdr.csum_data;
263                 else
264                         uh_sum = in6_cksum_pseudo(ip6, ulen, nxt,
265                             m->m_pkthdr.csum_data);
266                 uh_sum ^= 0xffff;
267         } else
268                 uh_sum = in6_cksum_partial(m, nxt, off, plen, ulen);
269
270         if (uh_sum != 0) {
271                 UDPSTAT_INC(udps_badsum);
272                 goto badunlocked;
273         }
274
275         /*
276          * Construct sockaddr format source address.
277          */
278         init_sin6(&fromsa, m);
279         fromsa.sin6_port = uh->uh_sport;
280
281         pcbinfo = udp_get_inpcbinfo(nxt);
282         if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
283                 struct inpcb *last;
284                 struct inpcbhead *pcblist;
285                 struct ip6_moptions *imo;
286
287                 INP_INFO_RLOCK(pcbinfo);
288                 /*
289                  * In the event that laddr should be set to the link-local
290                  * address (this happens in RIPng), the multicast address
291                  * specified in the received packet will not match laddr.  To
292                  * handle this situation, matching is relaxed if the
293                  * receiving interface is the same as one specified in the
294                  * socket and if the destination multicast address matches
295                  * one of the multicast groups specified in the socket.
296                  */
297
298                 /*
299                  * KAME note: traditionally we dropped udpiphdr from mbuf
300                  * here.  We need udphdr for IPsec processing so we do that
301                  * later.
302                  */
303                 pcblist = udp_get_pcblist(nxt);
304                 last = NULL;
305                 LIST_FOREACH(inp, pcblist, inp_list) {
306                         if ((inp->inp_vflag & INP_IPV6) == 0)
307                                 continue;
308                         if (inp->inp_lport != uh->uh_dport)
309                                 continue;
310                         if (inp->inp_fport != 0 &&
311                             inp->inp_fport != uh->uh_sport)
312                                 continue;
313                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
314                                 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
315                                                         &ip6->ip6_dst))
316                                         continue;
317                         }
318                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
319                                 if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
320                                                         &ip6->ip6_src) ||
321                                     inp->inp_fport != uh->uh_sport)
322                                         continue;
323                         }
324
325                         /*
326                          * XXXRW: Because we weren't holding either the inpcb
327                          * or the hash lock when we checked for a match 
328                          * before, we should probably recheck now that the 
329                          * inpcb lock is (supposed to be) held.
330                          */
331
332                         /*
333                          * Handle socket delivery policy for any-source
334                          * and source-specific multicast. [RFC3678]
335                          */
336                         imo = inp->in6p_moptions;
337                         if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
338                                 struct sockaddr_in6      mcaddr;
339                                 int                      blocked;
340
341                                 INP_RLOCK(inp);
342
343                                 bzero(&mcaddr, sizeof(struct sockaddr_in6));
344                                 mcaddr.sin6_len = sizeof(struct sockaddr_in6);
345                                 mcaddr.sin6_family = AF_INET6;
346                                 mcaddr.sin6_addr = ip6->ip6_dst;
347
348                                 blocked = im6o_mc_filter(imo, ifp,
349                                         (struct sockaddr *)&mcaddr,
350                                         (struct sockaddr *)&fromsa);
351                                 if (blocked != MCAST_PASS) {
352                                         if (blocked == MCAST_NOTGMEMBER)
353                                                 IP6STAT_INC(ip6s_notmember);
354                                         if (blocked == MCAST_NOTSMEMBER ||
355                                             blocked == MCAST_MUTED)
356                                                 UDPSTAT_INC(udps_filtermcast);
357                                         INP_RUNLOCK(inp); /* XXX */
358                                         continue;
359                                 }
360
361                                 INP_RUNLOCK(inp);
362                         }
363                         if (last != NULL) {
364                                 struct mbuf *n;
365
366                                 if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
367                                         INP_RLOCK(last);
368                                         UDP_PROBE(receive, NULL, last, ip6,
369                                             last, uh);
370                                         if (udp6_append(last, n, off, &fromsa))
371                                                 goto inp_lost;
372                                         INP_RUNLOCK(last);
373                                 }
374                         }
375                         last = inp;
376                         /*
377                          * Don't look for additional matches if this one does
378                          * not have either the SO_REUSEPORT or SO_REUSEADDR
379                          * socket options set.  This heuristic avoids
380                          * searching through all pcbs in the common case of a
381                          * non-shared port.  It assumes that an application
382                          * will never clear these options after setting them.
383                          */
384                         if ((last->inp_socket->so_options &
385                              (SO_REUSEPORT|SO_REUSEADDR)) == 0)
386                                 break;
387                 }
388
389                 if (last == NULL) {
390                         /*
391                          * No matching pcb found; discard datagram.  (No need
392                          * to send an ICMP Port Unreachable for a broadcast
393                          * or multicast datgram.)
394                          */
395                         UDPSTAT_INC(udps_noport);
396                         UDPSTAT_INC(udps_noportmcast);
397                         goto badheadlocked;
398                 }
399                 INP_RLOCK(last);
400                 INP_INFO_RUNLOCK(pcbinfo);
401                 UDP_PROBE(receive, NULL, last, ip6, last, uh);
402                 if (udp6_append(last, m, off, &fromsa) == 0) 
403                         INP_RUNLOCK(last);
404         inp_lost:
405                 return (IPPROTO_DONE);
406         }
407         /*
408          * Locate pcb for datagram.
409          */
410
411         /*
412          * Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain.
413          */
414         if ((m->m_flags & M_IP6_NEXTHOP) &&
415             (fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) {
416                 struct sockaddr_in6 *next_hop6;
417
418                 next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1);
419
420                 /*
421                  * Transparently forwarded. Pretend to be the destination.
422                  * Already got one like this?
423                  */
424                 inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
425                     uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
426                     INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m);
427                 if (!inp) {
428                         /*
429                          * It's new.  Try to find the ambushing socket.
430                          * Because we've rewritten the destination address,
431                          * any hardware-generated hash is ignored.
432                          */
433                         inp = in6_pcblookup(pcbinfo, &ip6->ip6_src,
434                             uh->uh_sport, &next_hop6->sin6_addr,
435                             next_hop6->sin6_port ? htons(next_hop6->sin6_port) :
436                             uh->uh_dport, INPLOOKUP_WILDCARD |
437                             INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif);
438                 }
439                 /* Remove the tag from the packet. We don't need it anymore. */
440                 m_tag_delete(m, fwd_tag);
441                 m->m_flags &= ~M_IP6_NEXTHOP;
442         } else
443                 inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
444                     uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
445                     INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
446                     m->m_pkthdr.rcvif, m);
447         if (inp == NULL) {
448                 if (udp_log_in_vain) {
449                         char ip6bufs[INET6_ADDRSTRLEN];
450                         char ip6bufd[INET6_ADDRSTRLEN];
451
452                         log(LOG_INFO,
453                             "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
454                             ip6_sprintf(ip6bufd, &ip6->ip6_dst),
455                             ntohs(uh->uh_dport),
456                             ip6_sprintf(ip6bufs, &ip6->ip6_src),
457                             ntohs(uh->uh_sport));
458                 }
459                 UDP_PROBE(receive, NULL, NULL, ip6, NULL, uh);
460                 UDPSTAT_INC(udps_noport);
461                 if (m->m_flags & M_MCAST) {
462                         printf("UDP6: M_MCAST is set in a unicast packet.\n");
463                         UDPSTAT_INC(udps_noportmcast);
464                         goto badunlocked;
465                 }
466                 if (V_udp_blackhole)
467                         goto badunlocked;
468                 icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
469                 return (IPPROTO_DONE);
470         }
471         INP_RLOCK_ASSERT(inp);
472         up = intoudpcb(inp);
473         if (cscov_partial) {
474                 if (up->u_rxcslen == 0 || up->u_rxcslen > ulen) {
475                         INP_RUNLOCK(inp);
476                         m_freem(m);
477                         return (IPPROTO_DONE);
478                 }
479         }
480         UDP_PROBE(receive, NULL, inp, ip6, inp, uh);
481         if (udp6_append(inp, m, off, &fromsa) == 0)
482                 INP_RUNLOCK(inp);
483         return (IPPROTO_DONE);
484
485 badheadlocked:
486         INP_INFO_RUNLOCK(pcbinfo);
487 badunlocked:
488         if (m)
489                 m_freem(m);
490         return (IPPROTO_DONE);
491 }
492
493 static void
494 udp6_common_ctlinput(int cmd, struct sockaddr *sa, void *d,
495     struct inpcbinfo *pcbinfo)
496 {
497         struct udphdr uh;
498         struct ip6_hdr *ip6;
499         struct mbuf *m;
500         int off = 0;
501         struct ip6ctlparam *ip6cp = NULL;
502         const struct sockaddr_in6 *sa6_src = NULL;
503         void *cmdarg;
504         struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
505         struct udp_portonly {
506                 u_int16_t uh_sport;
507                 u_int16_t uh_dport;
508         } *uhp;
509
510         if (sa->sa_family != AF_INET6 ||
511             sa->sa_len != sizeof(struct sockaddr_in6))
512                 return;
513
514         if ((unsigned)cmd >= PRC_NCMDS)
515                 return;
516         if (PRC_IS_REDIRECT(cmd))
517                 notify = in6_rtchange, d = NULL;
518         else if (cmd == PRC_HOSTDEAD)
519                 d = NULL;
520         else if (inet6ctlerrmap[cmd] == 0)
521                 return;
522
523         /* if the parameter is from icmp6, decode it. */
524         if (d != NULL) {
525                 ip6cp = (struct ip6ctlparam *)d;
526                 m = ip6cp->ip6c_m;
527                 ip6 = ip6cp->ip6c_ip6;
528                 off = ip6cp->ip6c_off;
529                 cmdarg = ip6cp->ip6c_cmdarg;
530                 sa6_src = ip6cp->ip6c_src;
531         } else {
532                 m = NULL;
533                 ip6 = NULL;
534                 cmdarg = NULL;
535                 sa6_src = &sa6_any;
536         }
537
538         if (ip6) {
539                 /*
540                  * XXX: We assume that when IPV6 is non NULL,
541                  * M and OFF are valid.
542                  */
543
544                 /* Check if we can safely examine src and dst ports. */
545                 if (m->m_pkthdr.len < off + sizeof(*uhp))
546                         return;
547
548                 bzero(&uh, sizeof(uh));
549                 m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
550
551                 if (!PRC_IS_REDIRECT(cmd)) {
552                         /* Check to see if its tunneled */
553                         struct inpcb *inp;
554                         inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_dst,
555                             uh.uh_dport, &ip6->ip6_src, uh.uh_sport,
556                             INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
557                             m->m_pkthdr.rcvif, m);
558                         if (inp != NULL) {
559                                 struct udpcb *up;
560                                 
561                                 up = intoudpcb(inp);
562                                 if (up->u_icmp_func) {
563                                         /* Yes it is. */
564                                         INP_RUNLOCK(inp);
565                                         (*up->u_icmp_func)(cmd, (struct sockaddr *)ip6cp->ip6c_src,
566                                               d, up->u_tun_ctx);
567                                         return;
568                                 } else {
569                                         /* Can't find it. */
570                                         INP_RUNLOCK(inp);
571                                 }
572                         }
573                 }
574                 (void)in6_pcbnotify(pcbinfo, sa, uh.uh_dport,
575                     (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
576                     cmdarg, notify);
577         } else
578                 (void)in6_pcbnotify(pcbinfo, sa, 0,
579                     (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
580 }
581
582 void
583 udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
584 {
585
586         return (udp6_common_ctlinput(cmd, sa, d, &V_udbinfo));
587 }
588
589 void
590 udplite6_ctlinput(int cmd, struct sockaddr *sa, void *d)
591 {
592
593         return (udp6_common_ctlinput(cmd, sa, d, &V_ulitecbinfo));
594 }
595
596 static int
597 udp6_getcred(SYSCTL_HANDLER_ARGS)
598 {
599         struct xucred xuc;
600         struct sockaddr_in6 addrs[2];
601         struct inpcb *inp;
602         int error;
603
604         error = priv_check(req->td, PRIV_NETINET_GETCRED);
605         if (error)
606                 return (error);
607
608         if (req->newlen != sizeof(addrs))
609                 return (EINVAL);
610         if (req->oldlen != sizeof(struct xucred))
611                 return (EINVAL);
612         error = SYSCTL_IN(req, addrs, sizeof(addrs));
613         if (error)
614                 return (error);
615         if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
616             (error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
617                 return (error);
618         }
619         inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr,
620             addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port,
621             INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL);
622         if (inp != NULL) {
623                 INP_RLOCK_ASSERT(inp);
624                 if (inp->inp_socket == NULL)
625                         error = ENOENT;
626                 if (error == 0)
627                         error = cr_canseesocket(req->td->td_ucred,
628                             inp->inp_socket);
629                 if (error == 0)
630                         cru2x(inp->inp_cred, &xuc);
631                 INP_RUNLOCK(inp);
632         } else
633                 error = ENOENT;
634         if (error == 0)
635                 error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
636         return (error);
637 }
638
639 SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
640     0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
641
642 static int
643 udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
644     struct mbuf *control, struct thread *td)
645 {
646         u_int32_t ulen = m->m_pkthdr.len;
647         u_int32_t plen = sizeof(struct udphdr) + ulen;
648         struct ip6_hdr *ip6;
649         struct udphdr *udp6;
650         struct in6_addr *laddr, *faddr, in6a;
651         struct sockaddr_in6 *sin6 = NULL;
652         int cscov_partial = 0;
653         int scope_ambiguous = 0;
654         u_short fport;
655         int error = 0;
656         uint8_t nxt;
657         uint16_t cscov = 0;
658         struct ip6_pktopts *optp, opt;
659         int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
660         int flags;
661         struct sockaddr_in6 tmp;
662
663         INP_WLOCK_ASSERT(inp);
664         INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
665
666         if (addr6) {
667                 /* addr6 has been validated in udp6_send(). */
668                 sin6 = (struct sockaddr_in6 *)addr6;
669
670                 /* protect *sin6 from overwrites */
671                 tmp = *sin6;
672                 sin6 = &tmp;
673
674                 /*
675                  * Application should provide a proper zone ID or the use of
676                  * default zone IDs should be enabled.  Unfortunately, some
677                  * applications do not behave as it should, so we need a
678                  * workaround.  Even if an appropriate ID is not determined,
679                  * we'll see if we can determine the outgoing interface.  If we
680                  * can, determine the zone ID based on the interface below.
681                  */
682                 if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
683                         scope_ambiguous = 1;
684                 if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
685                         return (error);
686         }
687
688         nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
689             IPPROTO_UDP : IPPROTO_UDPLITE;
690         if (control) {
691                 if ((error = ip6_setpktopts(control, &opt,
692                     inp->in6p_outputopts, td->td_ucred, nxt)) != 0)
693                         goto release;
694                 optp = &opt;
695         } else
696                 optp = inp->in6p_outputopts;
697
698         if (sin6) {
699                 faddr = &sin6->sin6_addr;
700
701                 /*
702                  * Since we saw no essential reason for calling in_pcbconnect,
703                  * we get rid of such kind of logic, and call in6_selectsrc
704                  * and in6_pcbsetport in order to fill in the local address
705                  * and the local port.
706                  */
707                 if (sin6->sin6_port == 0) {
708                         error = EADDRNOTAVAIL;
709                         goto release;
710                 }
711
712                 if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
713                         /* how about ::ffff:0.0.0.0 case? */
714                         error = EISCONN;
715                         goto release;
716                 }
717
718                 fport = sin6->sin6_port; /* allow 0 port */
719
720                 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
721                         if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
722                                 /*
723                                  * I believe we should explicitly discard the
724                                  * packet when mapped addresses are disabled,
725                                  * rather than send the packet as an IPv6 one.
726                                  * If we chose the latter approach, the packet
727                                  * might be sent out on the wire based on the
728                                  * default route, the situation which we'd
729                                  * probably want to avoid.
730                                  * (20010421 jinmei@kame.net)
731                                  */
732                                 error = EINVAL;
733                                 goto release;
734                         }
735                         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
736                             !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
737                                 /*
738                                  * when remote addr is an IPv4-mapped address,
739                                  * local addr should not be an IPv6 address,
740                                  * since you cannot determine how to map IPv6
741                                  * source address to IPv4.
742                                  */
743                                 error = EINVAL;
744                                 goto release;
745                         }
746
747                         af = AF_INET;
748                 }
749
750                 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
751                         error = in6_selectsrc_socket(sin6, optp, inp,
752                             td->td_ucred, scope_ambiguous, &in6a, NULL);
753                         if (error)
754                                 goto release;
755                         laddr = &in6a;
756                 } else
757                         laddr = &inp->in6p_laddr;       /* XXX */
758                 if (laddr == NULL) {
759                         if (error == 0)
760                                 error = EADDRNOTAVAIL;
761                         goto release;
762                 }
763                 if (inp->inp_lport == 0 &&
764                     (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) {
765                         /* Undo an address bind that may have occurred. */
766                         inp->in6p_laddr = in6addr_any;
767                         goto release;
768                 }
769         } else {
770                 if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
771                         error = ENOTCONN;
772                         goto release;
773                 }
774                 if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
775                         if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
776                                 /*
777                                  * XXX: this case would happen when the
778                                  * application sets the V6ONLY flag after
779                                  * connecting the foreign address.
780                                  * Such applications should be fixed,
781                                  * so we bark here.
782                                  */
783                                 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
784                                     "option was set for a connected socket\n");
785                                 error = EINVAL;
786                                 goto release;
787                         } else
788                                 af = AF_INET;
789                 }
790                 laddr = &inp->in6p_laddr;
791                 faddr = &inp->in6p_faddr;
792                 fport = inp->inp_fport;
793         }
794
795         if (af == AF_INET)
796                 hlen = sizeof(struct ip);
797
798         /*
799          * Calculate data length and get a mbuf
800          * for UDP and IP6 headers.
801          */
802         M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
803         if (m == NULL) {
804                 error = ENOBUFS;
805                 goto release;
806         }
807
808         /*
809          * Stuff checksum and output datagram.
810          */
811         udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
812         udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
813         udp6->uh_dport = fport;
814         if (nxt == IPPROTO_UDPLITE) {
815                 struct udpcb *up;
816
817                 up = intoudpcb(inp);
818                 cscov = up->u_txcslen;
819                 if (cscov >= plen)
820                         cscov = 0;
821                 udp6->uh_ulen = htons(cscov);
822                 /*
823                  * For UDP-Lite, checksum coverage length of zero means
824                  * the entire UDPLite packet is covered by the checksum.
825                  */
826                 cscov_partial = (cscov == 0) ? 0 : 1;
827         } else if (plen <= 0xffff)
828                 udp6->uh_ulen = htons((u_short)plen);
829         else
830                 udp6->uh_ulen = 0;
831         udp6->uh_sum = 0;
832
833         switch (af) {
834         case AF_INET6:
835                 ip6 = mtod(m, struct ip6_hdr *);
836                 ip6->ip6_flow   = inp->inp_flow & IPV6_FLOWINFO_MASK;
837                 ip6->ip6_vfc    &= ~IPV6_VERSION_MASK;
838                 ip6->ip6_vfc    |= IPV6_VERSION;
839                 ip6->ip6_plen   = htons((u_short)plen);
840                 ip6->ip6_nxt    = nxt;
841                 ip6->ip6_hlim   = in6_selecthlim(inp, NULL);
842                 ip6->ip6_src    = *laddr;
843                 ip6->ip6_dst    = *faddr;
844
845                 if (cscov_partial) {
846                         if ((udp6->uh_sum = in6_cksum_partial(m, nxt,
847                             sizeof(struct ip6_hdr), plen, cscov)) == 0)
848                                 udp6->uh_sum = 0xffff;
849                 } else {
850                         udp6->uh_sum = in6_cksum_pseudo(ip6, plen, nxt, 0);
851                         m->m_pkthdr.csum_flags = CSUM_UDP_IPV6;
852                         m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum);
853                 }
854
855 #ifdef  RSS
856                 {
857                         uint32_t hash_val, hash_type;
858                         uint8_t pr;
859
860                         pr = inp->inp_socket->so_proto->pr_protocol;
861                         /*
862                          * Calculate an appropriate RSS hash for UDP and
863                          * UDP Lite.
864                          *
865                          * The called function will take care of figuring out
866                          * whether a 2-tuple or 4-tuple hash is required based
867                          * on the currently configured scheme.
868                          *
869                          * Later later on connected socket values should be
870                          * cached in the inpcb and reused, rather than constantly
871                          * re-calculating it.
872                          *
873                          * UDP Lite is a different protocol number and will
874                          * likely end up being hashed as a 2-tuple until
875                          * RSS / NICs grow UDP Lite protocol awareness.
876                          */
877                         if (rss_proto_software_hash_v6(faddr, laddr, fport,
878                             inp->inp_lport, pr, &hash_val, &hash_type) == 0) {
879                                 m->m_pkthdr.flowid = hash_val;
880                                 M_HASHTYPE_SET(m, hash_type);
881                         }
882                 }
883 #endif
884                 flags = 0;
885 #ifdef  RSS
886                 /*
887                  * Don't override with the inp cached flowid.
888                  *
889                  * Until the whole UDP path is vetted, it may actually
890                  * be incorrect.
891                  */
892                 flags |= IP_NODEFAULTFLOWID;
893 #endif
894
895                 UDP_PROBE(send, NULL, inp, ip6, inp, udp6);
896                 UDPSTAT_INC(udps_opackets);
897                 error = ip6_output(m, optp, &inp->inp_route6, flags,
898                     inp->in6p_moptions, NULL, inp);
899                 break;
900         case AF_INET:
901                 error = EAFNOSUPPORT;
902                 goto release;
903         }
904         goto releaseopt;
905
906 release:
907         m_freem(m);
908
909 releaseopt:
910         if (control) {
911                 ip6_clearpktopts(&opt, -1);
912                 m_freem(control);
913         }
914         return (error);
915 }
916
917 static void
918 udp6_abort(struct socket *so)
919 {
920         struct inpcb *inp;
921         struct inpcbinfo *pcbinfo;
922
923         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
924         inp = sotoinpcb(so);
925         KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
926
927         INP_WLOCK(inp);
928 #ifdef INET
929         if (inp->inp_vflag & INP_IPV4) {
930                 struct pr_usrreqs *pru;
931                 uint8_t nxt;
932
933                 nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
934                     IPPROTO_UDP : IPPROTO_UDPLITE;
935                 INP_WUNLOCK(inp);
936                 pru = inetsw[ip_protox[nxt]].pr_usrreqs;
937                 (*pru->pru_abort)(so);
938                 return;
939         }
940 #endif
941
942         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
943                 INP_HASH_WLOCK(pcbinfo);
944                 in6_pcbdisconnect(inp);
945                 inp->in6p_laddr = in6addr_any;
946                 INP_HASH_WUNLOCK(pcbinfo);
947                 soisdisconnected(so);
948         }
949         INP_WUNLOCK(inp);
950 }
951
952 static int
953 udp6_attach(struct socket *so, int proto, struct thread *td)
954 {
955         struct inpcb *inp;
956         struct inpcbinfo *pcbinfo;
957         int error;
958
959         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
960         inp = sotoinpcb(so);
961         KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
962
963         if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
964                 error = soreserve(so, udp_sendspace, udp_recvspace);
965                 if (error)
966                         return (error);
967         }
968         INP_INFO_WLOCK(pcbinfo);
969         error = in_pcballoc(so, pcbinfo);
970         if (error) {
971                 INP_INFO_WUNLOCK(pcbinfo);
972                 return (error);
973         }
974         inp = (struct inpcb *)so->so_pcb;
975         inp->inp_vflag |= INP_IPV6;
976         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
977                 inp->inp_vflag |= INP_IPV4;
978         inp->in6p_hops = -1;    /* use kernel default */
979         inp->in6p_cksum = -1;   /* just to be sure */
980         /*
981          * XXX: ugly!!
982          * IPv4 TTL initialization is necessary for an IPv6 socket as well,
983          * because the socket may be bound to an IPv6 wildcard address,
984          * which may match an IPv4-mapped IPv6 address.
985          */
986         inp->inp_ip_ttl = V_ip_defttl;
987
988         error = udp_newudpcb(inp);
989         if (error) {
990                 in_pcbdetach(inp);
991                 in_pcbfree(inp);
992                 INP_INFO_WUNLOCK(pcbinfo);
993                 return (error);
994         }
995         INP_WUNLOCK(inp);
996         INP_INFO_WUNLOCK(pcbinfo);
997         return (0);
998 }
999
1000 static int
1001 udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
1002 {
1003         struct inpcb *inp;
1004         struct inpcbinfo *pcbinfo;
1005         int error;
1006         u_char vflagsav;
1007
1008         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1009         inp = sotoinpcb(so);
1010         KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
1011
1012         INP_WLOCK(inp);
1013         INP_HASH_WLOCK(pcbinfo);
1014         vflagsav = inp->inp_vflag;
1015         inp->inp_vflag &= ~INP_IPV4;
1016         inp->inp_vflag |= INP_IPV6;
1017         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1018                 struct sockaddr_in6 *sin6_p;
1019
1020                 sin6_p = (struct sockaddr_in6 *)nam;
1021
1022                 if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
1023                         inp->inp_vflag |= INP_IPV4;
1024 #ifdef INET
1025                 else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
1026                         struct sockaddr_in sin;
1027
1028                         in6_sin6_2_sin(&sin, sin6_p);
1029                         inp->inp_vflag |= INP_IPV4;
1030                         inp->inp_vflag &= ~INP_IPV6;
1031                         error = in_pcbbind(inp, (struct sockaddr *)&sin,
1032                             td->td_ucred);
1033                         goto out;
1034                 }
1035 #endif
1036         }
1037
1038         error = in6_pcbbind(inp, nam, td->td_ucred);
1039 #ifdef INET
1040 out:
1041 #endif
1042         if (error != 0)
1043                 inp->inp_vflag = vflagsav;
1044         INP_HASH_WUNLOCK(pcbinfo);
1045         INP_WUNLOCK(inp);
1046         return (error);
1047 }
1048
1049 static void
1050 udp6_close(struct socket *so)
1051 {
1052         struct inpcb *inp;
1053         struct inpcbinfo *pcbinfo;
1054
1055         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1056         inp = sotoinpcb(so);
1057         KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
1058
1059         INP_WLOCK(inp);
1060 #ifdef INET
1061         if (inp->inp_vflag & INP_IPV4) {
1062                 struct pr_usrreqs *pru;
1063                 uint8_t nxt;
1064
1065                 nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
1066                     IPPROTO_UDP : IPPROTO_UDPLITE;
1067                 INP_WUNLOCK(inp);
1068                 pru = inetsw[ip_protox[nxt]].pr_usrreqs;
1069                 (*pru->pru_disconnect)(so);
1070                 return;
1071         }
1072 #endif
1073         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1074                 INP_HASH_WLOCK(pcbinfo);
1075                 in6_pcbdisconnect(inp);
1076                 inp->in6p_laddr = in6addr_any;
1077                 INP_HASH_WUNLOCK(pcbinfo);
1078                 soisdisconnected(so);
1079         }
1080         INP_WUNLOCK(inp);
1081 }
1082
1083 static int
1084 udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
1085 {
1086         struct inpcb *inp;
1087         struct inpcbinfo *pcbinfo;
1088         struct sockaddr_in6 *sin6;
1089         int error;
1090         u_char vflagsav;
1091
1092         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1093         inp = sotoinpcb(so);
1094         sin6 = (struct sockaddr_in6 *)nam;
1095         KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
1096
1097         /*
1098          * XXXRW: Need to clarify locking of v4/v6 flags.
1099          */
1100         INP_WLOCK(inp);
1101 #ifdef INET
1102         if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
1103                 struct sockaddr_in sin;
1104
1105                 if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) {
1106                         error = EINVAL;
1107                         goto out;
1108                 }
1109                 if ((inp->inp_vflag & INP_IPV4) == 0) {
1110                         error = EAFNOSUPPORT;
1111                         goto out;
1112                 }
1113                 if (inp->inp_faddr.s_addr != INADDR_ANY) {
1114                         error = EISCONN;
1115                         goto out;
1116                 }
1117                 in6_sin6_2_sin(&sin, sin6);
1118                 error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
1119                 if (error != 0)
1120                         goto out;
1121                 vflagsav = inp->inp_vflag;
1122                 inp->inp_vflag |= INP_IPV4;
1123                 inp->inp_vflag &= ~INP_IPV6;
1124                 INP_HASH_WLOCK(pcbinfo);
1125                 error = in_pcbconnect(inp, (struct sockaddr *)&sin,
1126                     td->td_ucred);
1127                 INP_HASH_WUNLOCK(pcbinfo);
1128                 /*
1129                  * If connect succeeds, mark socket as connected. If
1130                  * connect fails and socket is unbound, reset inp_vflag
1131                  * field.
1132                  */
1133                 if (error == 0)
1134                         soisconnected(so);
1135                 else if (inp->inp_laddr.s_addr == INADDR_ANY &&
1136                     inp->inp_lport == 0)
1137                         inp->inp_vflag = vflagsav;
1138                 goto out;
1139         } else {
1140                 if ((inp->inp_vflag & INP_IPV6) == 0) {
1141                         error = EAFNOSUPPORT;
1142                         goto out;
1143                 }
1144         }
1145 #endif
1146         if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1147                 error = EISCONN;
1148                 goto out;
1149         }
1150         error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
1151         if (error != 0)
1152                 goto out;
1153         vflagsav = inp->inp_vflag;
1154         inp->inp_vflag &= ~INP_IPV4;
1155         inp->inp_vflag |= INP_IPV6;
1156         INP_HASH_WLOCK(pcbinfo);
1157         error = in6_pcbconnect(inp, nam, td->td_ucred);
1158         INP_HASH_WUNLOCK(pcbinfo);
1159         /*
1160          * If connect succeeds, mark socket as connected. If
1161          * connect fails and socket is unbound, reset inp_vflag
1162          * field.
1163          */
1164         if (error == 0)
1165                 soisconnected(so);
1166         else if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
1167             inp->inp_lport == 0)
1168                 inp->inp_vflag = vflagsav;
1169 out:
1170         INP_WUNLOCK(inp);
1171         return (error);
1172 }
1173
1174 static void
1175 udp6_detach(struct socket *so)
1176 {
1177         struct inpcb *inp;
1178         struct inpcbinfo *pcbinfo;
1179         struct udpcb *up;
1180
1181         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1182         inp = sotoinpcb(so);
1183         KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
1184
1185         INP_INFO_WLOCK(pcbinfo);
1186         INP_WLOCK(inp);
1187         up = intoudpcb(inp);
1188         KASSERT(up != NULL, ("%s: up == NULL", __func__));
1189         in_pcbdetach(inp);
1190         in_pcbfree(inp);
1191         INP_INFO_WUNLOCK(pcbinfo);
1192         udp_discardcb(up);
1193 }
1194
1195 static int
1196 udp6_disconnect(struct socket *so)
1197 {
1198         struct inpcb *inp;
1199         struct inpcbinfo *pcbinfo;
1200         int error;
1201
1202         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1203         inp = sotoinpcb(so);
1204         KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
1205
1206         INP_WLOCK(inp);
1207 #ifdef INET
1208         if (inp->inp_vflag & INP_IPV4) {
1209                 struct pr_usrreqs *pru;
1210                 uint8_t nxt;
1211
1212                 nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
1213                     IPPROTO_UDP : IPPROTO_UDPLITE;
1214                 INP_WUNLOCK(inp);
1215                 pru = inetsw[ip_protox[nxt]].pr_usrreqs;
1216                 (void)(*pru->pru_disconnect)(so);
1217                 return (0);
1218         }
1219 #endif
1220
1221         if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1222                 error = ENOTCONN;
1223                 goto out;
1224         }
1225
1226         INP_HASH_WLOCK(pcbinfo);
1227         in6_pcbdisconnect(inp);
1228         inp->in6p_laddr = in6addr_any;
1229         INP_HASH_WUNLOCK(pcbinfo);
1230         SOCK_LOCK(so);
1231         so->so_state &= ~SS_ISCONNECTED;                /* XXX */
1232         SOCK_UNLOCK(so);
1233 out:
1234         INP_WUNLOCK(inp);
1235         return (0);
1236 }
1237
1238 static int
1239 udp6_send(struct socket *so, int flags, struct mbuf *m,
1240     struct sockaddr *addr, struct mbuf *control, struct thread *td)
1241 {
1242         struct inpcb *inp;
1243         struct inpcbinfo *pcbinfo;
1244         int error = 0;
1245
1246         pcbinfo = udp_get_inpcbinfo(so->so_proto->pr_protocol);
1247         inp = sotoinpcb(so);
1248         KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
1249
1250         INP_WLOCK(inp);
1251         if (addr) {
1252                 if (addr->sa_len != sizeof(struct sockaddr_in6)) {
1253                         error = EINVAL;
1254                         goto bad;
1255                 }
1256                 if (addr->sa_family != AF_INET6) {
1257                         error = EAFNOSUPPORT;
1258                         goto bad;
1259                 }
1260         }
1261
1262 #ifdef INET
1263         if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1264                 int hasv4addr;
1265                 struct sockaddr_in6 *sin6 = NULL;
1266
1267                 if (addr == NULL)
1268                         hasv4addr = (inp->inp_vflag & INP_IPV4);
1269                 else {
1270                         sin6 = (struct sockaddr_in6 *)addr;
1271                         hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
1272                             ? 1 : 0;
1273                 }
1274                 if (hasv4addr) {
1275                         struct pr_usrreqs *pru;
1276                         uint8_t nxt;
1277
1278                         nxt = (inp->inp_socket->so_proto->pr_protocol ==
1279                             IPPROTO_UDP) ? IPPROTO_UDP : IPPROTO_UDPLITE;
1280                         /*
1281                          * XXXRW: We release UDP-layer locks before calling
1282                          * udp_send() in order to avoid recursion.  However,
1283                          * this does mean there is a short window where inp's
1284                          * fields are unstable.  Could this lead to a
1285                          * potential race in which the factors causing us to
1286                          * select the UDPv4 output routine are invalidated?
1287                          */
1288                         INP_WUNLOCK(inp);
1289                         if (sin6)
1290                                 in6_sin6_2_sin_in_sock(addr);
1291                         pru = inetsw[ip_protox[nxt]].pr_usrreqs;
1292                         /* addr will just be freed in sendit(). */
1293                         return ((*pru->pru_send)(so, flags, m, addr, control,
1294                             td));
1295                 }
1296         }
1297 #endif
1298 #ifdef MAC
1299         mac_inpcb_create_mbuf(inp, m);
1300 #endif
1301         INP_HASH_WLOCK(pcbinfo);
1302         error = udp6_output(inp, m, addr, control, td);
1303         INP_HASH_WUNLOCK(pcbinfo);
1304         INP_WUNLOCK(inp);
1305         return (error);
1306
1307 bad:
1308         INP_WUNLOCK(inp);
1309         m_freem(m);
1310         return (error);
1311 }
1312
1313 struct pr_usrreqs udp6_usrreqs = {
1314         .pru_abort =            udp6_abort,
1315         .pru_attach =           udp6_attach,
1316         .pru_bind =             udp6_bind,
1317         .pru_connect =          udp6_connect,
1318         .pru_control =          in6_control,
1319         .pru_detach =           udp6_detach,
1320         .pru_disconnect =       udp6_disconnect,
1321         .pru_peeraddr =         in6_mapped_peeraddr,
1322         .pru_send =             udp6_send,
1323         .pru_shutdown =         udp_shutdown,
1324         .pru_sockaddr =         in6_mapped_sockaddr,
1325         .pru_soreceive =        soreceive_dgram,
1326         .pru_sosend =           sosend_dgram,
1327         .pru_sosetlabel =       in_pcbsosetlabel,
1328         .pru_close =            udp6_close
1329 };