2 # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
4 # For more information on this file, please read the handbook section on
5 # Kernel Configuration Files:
7 # http://www.freebsd.org/handbook/kernelconfig-config.html
9 # The handbook is also available locally in /usr/share/doc/handbook
10 # if you've installed the doc distribution, otherwise always see the
11 # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
14 # An exhaustive list of options and more detailed explanations of the
15 # device lines is also present in the ./LINT configuration file. If you are
16 # in doubt as to the purpose or necessity of a line, check first in LINT.
20 # GENERIC98 -- Generic PC98 machine with WD/SCSI disks
30 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
33 options MATH_EMULATE #Support for x87 emulation
34 options INET #InterNETworking
35 options FFS #Berkeley Fast Filesystem
36 options FFS_ROOT #FFS usable as root device [keep this!]
37 options MFS #Memory Filesystem
38 options MFS_ROOT #MFS usable as root device, "MFS" req'ed
39 options NFS #Network Filesystem
40 options NFS_ROOT #NFS usable as root device, "NFS" req'ed
41 options MSDOSFS #MSDOS Filesystem
42 options CD9660 #ISO 9660 Filesystem
43 options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed
44 options PROCFS #Process filesystem
45 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
46 options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
47 options EPSON_BOUNCEDMA #use bounce buufer for 15-16M
48 #options EPSON_MEMWIN #EPSON memory window support
49 options UCONSOLE #Allow users to grab the console
51 options USERCONFIG #boot -c editor
52 options VISUAL_USERCONFIG #visual boot -c editor
53 options KTRACE #ktrace(1) syscall trace support
54 options SYSVSHM #SYSV-style shared memory
55 options SYSVMSG #SYSV-style message queues
56 options SYSVSEM #SYSV-style semaphores
58 # To make an SMP kernel, the next two are needed
59 #options SMP # Symmetric MultiProcessor Kernel
60 #options APIC_IO # Symmetric (APIC) I/O
61 # Optionally these may need tweaked, (defaults shown):
62 #options NCPU=2 # number of CPUs
63 #options NBUS=4 # number of busses
64 #options NAPIC=1 # number of IO APICs
65 #options NINTR=24 # number of INTs
68 controller pnp0 # PnP support for ISA
72 controller fdc0 at isa? port IO_FD1 irq 11 drq 2
73 device fd0 at fdc0 drive 0
74 device fd1 at fdc0 drive 1
75 device fd2 at fdc0 drive 2
76 device fd3 at fdc0 drive 3
78 # IDE controller and disks
79 controller wdc0 at isa? port IO_WD1 irq 9
80 device wd0 at wdc0 drive 0
81 #device wd1 at wdc0 drive 1
82 #device wd2 at wdc0 drive 2
83 #device wd3 at wdc0 drive 3
85 # ATAPI devices on wdc?
86 device wcd0 #IDE CD-ROM
87 #device wfd0 #IDE Floppy (e.g. LS-120)
88 #device wst0 #IDE Tape (e.g. Travan)
91 # A single entry for any of these controllers (ncr, ahb, ahc) is
92 # sufficient for any number of installed devices.
93 controller ncr0 # NCR/Symbios Logic
94 controller ahc0 # AHA2940 and onboard AIC7xxx devices
95 controller amd0 # AMD 53C974 (Teckram DC-390(T))
96 controller isp0 # Qlogic family
100 # WD33C93 SCSI card (55/92 like board)
103 options BS_TARG_SAFEMODE
106 controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
108 # controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000
110 #controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000
112 #controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000
114 #controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
116 #controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000
119 # Only one of each of these is needed, they are dynamically allocated.
120 controller scbus0 # SCSI bus (required)
121 device da0 # Direct Access (disks)
122 device sa0 # Sequential Access (tape etc)
124 device pass0 # Passthrough device (direct SCSI access)
126 # Proprietary or custom CD-ROM Interfaces
127 device matcd0 at isa? port?
130 device pckbd0 at isa? port IO_KBD irq 1
131 #options KBD_INSTALL_CDEV
135 # splash screen/screen saver
138 # syscons is the default console driver, resembling an SCO console
141 # Floating point support - do not disable.
142 device npx0 at nexus? port IO_NPX irq 8
144 # Power management support (see LINT for more options)
145 device apm0 at nexus? disable flags 0x31 # Advanced Power Management
147 # PCCARD (PCMCIA) support
149 #device pcic0 at isa?
150 #device pcic1 at isa?
154 options COM_MULTIPORT
157 device sio0 at isa? port IO_COM1 irq 4
159 device sio1 at isa? port 0x238 irq 5 flags 0x12000000
160 # PC-9861K, PC-9801-101, MDC-926Rs
161 #device sio1 at isa? port IO_COM2 irq 5 flags 0x01000000
162 #device sio2 at isa? port IO_COM3 irq 6 flags 0x02000000
163 # PC-9801-120 (PnP off)
164 #device sio1 at isa? port 0x8b0 irq 5 flags 0x11000000
165 # MC-16550II, MC-RS98
166 #device sio1 at isa? port 0xd2 irq 5 flags 0x14000101
167 #device sio2 at isa? port 0x8d2 flags 0x14000101
168 # RSB-2000, RSB-3000, B98-02
169 #device sio1 at isa? port 0xb0 flags 0x15000101
170 #device sio2 at isa? port 0xb1 flags 0x15000101
172 #device sio1 at isa? port 0xb0 flags 0x16000000
173 #device sio2 at isa? port 0xb1 flags 0x16000000
175 #device sio1 at isa? port 0x50e0 irq 5 flags 0x18000101
176 #device sio2 at isa? port 0x51e0 flags 0x18000101
179 #device sio1 at isa? port 0x18b0 irq 5 flags 0x19000000
181 device mse0 at isa? port IO_MSE irq 13
184 device ppc0 at isa? port? irq 14
185 controller ppbus0 # Parallel port bus (required)
186 device lpt0 # Printer
187 device plip0 # TCP/IP over parallel
188 device ppi0 # Parallel port interface device
189 #controller vpo0 # Requires scbus and da0
191 # Please stay olpt driver after ppc driver
192 device olpt0 at isa? port IO_LPT
196 device ax0 # ASIX AX88140A
197 device de0 # DEC/Intel DC21x4x (``Tulip'')
198 device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
199 device pn0 # Lite-On 82c168/82c169 (``PNIC'')
200 device tx0 # SMC 9432TX (83c170 ``EPIC'')
201 device vx0 # 3Com 3c590, 3c595 (``Vortex'')
203 # PCI Ethernet NICs that use the common MII bus controller code.
204 controller miibus0 # MII bus support
205 device al0 # ADMtek AL981/AN985 (``Comet''/``Centaur'')
206 device dm0 # Davicom DM9100/DM9102
207 device mx0 # Macronix 98713/98715/98725 (``PMAC'')
208 device rl0 # RealTek 8129/8139
209 device sf0 # Adaptec AIC-6915 (``Starfire'')
210 device sis0 # Silicon Integrated Systems SiS 900/SiS 7016
211 device ste0 # Sundance ST201 (D-Link DFE-550TX)
212 device tl0 # Texas Instruments ThunderLAN
213 device vr0 # VIA Rhine, Rhine II
214 device wb0 # Winbond W89C840F
215 device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
221 # ed0: generic driver
225 # ed4: ICM-IF-2766/EN-2298-T
234 # fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98
235 # fe1: C-NET(98)P2/C-NET(9N)E
237 # FE_8BIT_SUPPORT is needed to support LAC-98
239 #device ed0 at isa? port 0x00d0 irq 6
240 #device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
241 #device ed1 at isa? port 0x00d8 irq 6 flags 0x200000
242 #device ed3 at isa? port 0x00d0 irq 6 flags 0x400000
243 #device ed4 at isa? port 0x56d0 irq 5 flags 0x500000
244 #device ed2 at isa? port 0x00d8 irq 6 flags 0x300000
245 #device ed7 at isa? port 0x00d0 irq 6 flags 0x900000
246 #device ed6 at isa? port 0x0770 irq 6 flags 0x800000
247 #device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000
248 #device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
249 device ep0 at isa? port 0x40d0 irq 3
250 device fe0 at isa? port 0x00d0 irq 3
251 device fe1 at isa? port 0x73d0 irq 5
252 device lnc0 at isa? port 0x03d0 irq 6
254 options FE_8BIT_SUPPORT # LAC-98 support
256 # PCCARD NIC drivers.
257 # ze and zp take over the pcic and cannot coexist with generic pccard
258 # support, nor the ed and ep drivers they replace.
259 #device zp0 at isa? port 0x00d0 irq 10 iomem 0xe0000
262 #device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3
263 #device sbxvi0 at isa? drq 3
264 #device sbmidi0 at isa? port 0x80d2
265 #device opl0 at isa? port 0x28d2
266 #device nss0 at isa? port 0xa460 irq 12
267 #device mss0 at isa? port 0xf40 irq 12 drq 1
268 #device mpu0 at isa? port 0xe0d0 irq 6
270 # Pseudo devices - the number indicates how many units to allocated.
271 pseudo-device loop # Network loopback
272 pseudo-device ether # Ethernet support
273 pseudo-device sl 1 # Kernel SLIP
274 pseudo-device ppp 1 # Kernel PPP
275 pseudo-device tun # Packet tunnel.
276 pseudo-device pty # Pseudo-ttys (telnet etc)
277 pseudo-device gzip # Exec gzipped a.out's
279 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
280 # Be aware of the administrative consequences of enabling this!
281 pseudo-device bpf #Berkeley packet filter
283 #pseudo-device compat_atdisk #IBM-PC HDD support