2 * Copyright (c) 2005 Poul-Henning Kamp <phk@FreeBSD.org>
3 * Copyright (c) 1997, 1998, 1999
4 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Bill Paul.
17 * 4. Neither the name of the author nor the names of any co-contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31 * THE POSSIBILITY OF SUCH DAMAGE.
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
38 * SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are
39 * available from http://www.sis.com.tw.
41 * This driver also supports the NatSemi DP83815. Datasheets are
42 * available from http://www.national.com.
44 * Written by Bill Paul <wpaul@ee.columbia.edu>
45 * Electrical Engineering Department
46 * Columbia University, New York City
49 * The SiS 900 is a fairly simple chip. It uses bus master DMA with
50 * simple TX and RX descriptors of 3 longwords in size. The receiver
51 * has a single perfect filter entry for the station address and a
52 * 128-bit multicast hash table. The SiS 900 has a built-in MII-based
53 * transceiver while the 7016 requires an external transceiver chip.
54 * Both chips offer the standard bit-bang MII interface as well as
55 * an enchanced PHY interface which simplifies accessing MII registers.
57 * The only downside to this chipset is that RX descriptors must be
61 #ifdef HAVE_KERNEL_OPTION_HEADERS
62 #include "opt_device_polling.h"
65 #include <sys/param.h>
66 #include <sys/systm.h>
67 #include <sys/sockio.h>
69 #include <sys/malloc.h>
70 #include <sys/kernel.h>
71 #include <sys/module.h>
72 #include <sys/socket.h>
75 #include <net/if_arp.h>
76 #include <net/ethernet.h>
77 #include <net/if_dl.h>
78 #include <net/if_media.h>
79 #include <net/if_types.h>
80 #include <net/if_vlan_var.h>
84 #include <machine/bus.h>
85 #include <machine/resource.h>
89 #include <dev/mii/mii.h>
90 #include <dev/mii/miivar.h>
92 #include <dev/pci/pcireg.h>
93 #include <dev/pci/pcivar.h>
95 #define SIS_USEIOSPACE
97 #include <pci/if_sisreg.h>
99 MODULE_DEPEND(sis, pci, 1, 1, 1);
100 MODULE_DEPEND(sis, ether, 1, 1, 1);
101 MODULE_DEPEND(sis, miibus, 1, 1, 1);
103 /* "device miibus" required. See GENERIC if you get errors here. */
104 #include "miibus_if.h"
106 #define SIS_LOCK(_sc) mtx_lock(&(_sc)->sis_mtx)
107 #define SIS_UNLOCK(_sc) mtx_unlock(&(_sc)->sis_mtx)
108 #define SIS_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sis_mtx, MA_OWNED)
111 * register space access macros
113 #define CSR_WRITE_4(sc, reg, val) bus_write_4(sc->sis_res[0], reg, val)
115 #define CSR_READ_4(sc, reg) bus_read_4(sc->sis_res[0], reg)
117 #define CSR_READ_2(sc, reg) bus_read_2(sc->sis_res[0], reg)
120 * Various supported device vendors/types and their names.
122 static struct sis_type sis_devs[] = {
123 { SIS_VENDORID, SIS_DEVICEID_900, "SiS 900 10/100BaseTX" },
124 { SIS_VENDORID, SIS_DEVICEID_7016, "SiS 7016 10/100BaseTX" },
125 { NS_VENDORID, NS_DEVICEID_DP83815, "NatSemi DP8381[56] 10/100BaseTX" },
129 static int sis_detach(device_t);
130 static void sis_ifmedia_sts(struct ifnet *, struct ifmediareq *);
131 static int sis_ifmedia_upd(struct ifnet *);
132 static void sis_init(void *);
133 static void sis_initl(struct sis_softc *);
134 static void sis_intr(void *);
135 static int sis_ioctl(struct ifnet *, u_long, caddr_t);
136 static int sis_newbuf(struct sis_softc *, struct sis_desc *, struct mbuf *);
137 static void sis_start(struct ifnet *);
138 static void sis_startl(struct ifnet *);
139 static void sis_stop(struct sis_softc *);
140 static void sis_watchdog(struct ifnet *);
143 static struct resource_spec sis_res_spec[] = {
144 #ifdef SIS_USEIOSPACE
145 { SYS_RES_IOPORT, SIS_PCI_LOIO, RF_ACTIVE},
147 { SYS_RES_MEMORY, SIS_PCI_LOMEM, RF_ACTIVE},
149 { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE},
153 #define SIS_SETBIT(sc, reg, x) \
154 CSR_WRITE_4(sc, reg, \
155 CSR_READ_4(sc, reg) | (x))
157 #define SIS_CLRBIT(sc, reg, x) \
158 CSR_WRITE_4(sc, reg, \
159 CSR_READ_4(sc, reg) & ~(x))
162 CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x)
165 CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x)
168 sis_dma_map_desc_next(void *arg, bus_dma_segment_t *segs, int nseg, int error)
173 r->sis_next = segs->ds_addr;
177 sis_dma_map_desc_ptr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
182 r->sis_ptr = segs->ds_addr;
186 sis_dma_map_ring(void *arg, bus_dma_segment_t *segs, int nseg, int error)
195 * Routine to reverse the bits in a word. Stolen almost
196 * verbatim from /usr/games/fortune.
199 sis_reverse(uint16_t n)
201 n = ((n >> 1) & 0x5555) | ((n << 1) & 0xaaaa);
202 n = ((n >> 2) & 0x3333) | ((n << 2) & 0xcccc);
203 n = ((n >> 4) & 0x0f0f) | ((n << 4) & 0xf0f0);
204 n = ((n >> 8) & 0x00ff) | ((n << 8) & 0xff00);
210 sis_delay(struct sis_softc *sc)
214 for (idx = (300 / 33) + 1; idx > 0; idx--)
215 CSR_READ_4(sc, SIS_CSR);
219 sis_eeprom_idle(struct sis_softc *sc)
223 SIO_SET(SIS_EECTL_CSEL);
225 SIO_SET(SIS_EECTL_CLK);
228 for (i = 0; i < 25; i++) {
229 SIO_CLR(SIS_EECTL_CLK);
231 SIO_SET(SIS_EECTL_CLK);
235 SIO_CLR(SIS_EECTL_CLK);
237 SIO_CLR(SIS_EECTL_CSEL);
239 CSR_WRITE_4(sc, SIS_EECTL, 0x00000000);
243 * Send a read command and address to the EEPROM, check for ACK.
246 sis_eeprom_putbyte(struct sis_softc *sc, int addr)
250 d = addr | SIS_EECMD_READ;
253 * Feed in each bit and stobe the clock.
255 for (i = 0x400; i; i >>= 1) {
257 SIO_SET(SIS_EECTL_DIN);
259 SIO_CLR(SIS_EECTL_DIN);
262 SIO_SET(SIS_EECTL_CLK);
264 SIO_CLR(SIS_EECTL_CLK);
270 * Read a word of data stored in the EEPROM at address 'addr.'
273 sis_eeprom_getword(struct sis_softc *sc, int addr, uint16_t *dest)
278 /* Force EEPROM to idle state. */
281 /* Enter EEPROM access mode. */
283 SIO_CLR(SIS_EECTL_CLK);
285 SIO_SET(SIS_EECTL_CSEL);
289 * Send address of word we want to read.
291 sis_eeprom_putbyte(sc, addr);
294 * Start reading bits from EEPROM.
296 for (i = 0x8000; i; i >>= 1) {
297 SIO_SET(SIS_EECTL_CLK);
299 if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT)
302 SIO_CLR(SIS_EECTL_CLK);
306 /* Turn off EEPROM access mode. */
313 * Read a sequence of words from the EEPROM.
316 sis_read_eeprom(struct sis_softc *sc, caddr_t dest, int off, int cnt, int swap)
319 u_int16_t word = 0, *ptr;
321 for (i = 0; i < cnt; i++) {
322 sis_eeprom_getword(sc, off + i, &word);
323 ptr = (u_int16_t *)(dest + (i * 2));
331 #if defined(__i386__) || defined(__amd64__)
333 sis_find_bridge(device_t dev)
335 devclass_t pci_devclass;
336 device_t *pci_devices;
338 device_t *pci_children;
339 int pci_childcount = 0;
340 device_t *busp, *childp;
341 device_t child = NULL;
344 if ((pci_devclass = devclass_find("pci")) == NULL)
347 devclass_get_devices(pci_devclass, &pci_devices, &pci_count);
349 for (i = 0, busp = pci_devices; i < pci_count; i++, busp++) {
351 device_get_children(*busp, &pci_children, &pci_childcount);
352 for (j = 0, childp = pci_children;
353 j < pci_childcount; j++, childp++) {
354 if (pci_get_vendor(*childp) == SIS_VENDORID &&
355 pci_get_device(*childp) == 0x0008) {
363 free(pci_devices, M_TEMP);
364 free(pci_children, M_TEMP);
369 sis_read_cmos(struct sis_softc *sc, device_t dev, caddr_t dest, int off, int cnt)
374 bus_space_tag_t btag;
376 bridge = sis_find_bridge(dev);
379 reg = pci_read_config(bridge, 0x48, 1);
380 pci_write_config(bridge, 0x48, reg|0x40, 1);
383 #if defined(__i386__)
384 btag = I386_BUS_SPACE_IO;
385 #elif defined(__amd64__)
386 btag = AMD64_BUS_SPACE_IO;
389 for (i = 0; i < cnt; i++) {
390 bus_space_write_1(btag, 0x0, 0x70, i + off);
391 *(dest + i) = bus_space_read_1(btag, 0x0, 0x71);
394 pci_write_config(bridge, 0x48, reg & ~0x40, 1);
399 sis_read_mac(struct sis_softc *sc, device_t dev, caddr_t dest)
401 u_int32_t filtsave, csrsave;
403 filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
404 csrsave = CSR_READ_4(sc, SIS_CSR);
406 CSR_WRITE_4(sc, SIS_CSR, SIS_CSR_RELOAD | filtsave);
407 CSR_WRITE_4(sc, SIS_CSR, 0);
409 CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave & ~SIS_RXFILTCTL_ENABLE);
411 CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
412 ((u_int16_t *)dest)[0] = CSR_READ_2(sc, SIS_RXFILT_DATA);
413 CSR_WRITE_4(sc, SIS_RXFILT_CTL,SIS_FILTADDR_PAR1);
414 ((u_int16_t *)dest)[1] = CSR_READ_2(sc, SIS_RXFILT_DATA);
415 CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
416 ((u_int16_t *)dest)[2] = CSR_READ_2(sc, SIS_RXFILT_DATA);
418 CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
419 CSR_WRITE_4(sc, SIS_CSR, csrsave);
425 * Sync the PHYs by setting data bit and strobing the clock 32 times.
428 sis_mii_sync(struct sis_softc *sc)
432 SIO_SET(SIS_MII_DIR|SIS_MII_DATA);
434 for (i = 0; i < 32; i++) {
435 SIO_SET(SIS_MII_CLK);
437 SIO_CLR(SIS_MII_CLK);
443 * Clock a series of bits through the MII.
446 sis_mii_send(struct sis_softc *sc, uint32_t bits, int cnt)
450 SIO_CLR(SIS_MII_CLK);
452 for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
454 SIO_SET(SIS_MII_DATA);
456 SIO_CLR(SIS_MII_DATA);
459 SIO_CLR(SIS_MII_CLK);
461 SIO_SET(SIS_MII_CLK);
466 * Read an PHY register through the MII.
469 sis_mii_readreg(struct sis_softc *sc, struct sis_mii_frame *frame)
474 * Set up frame for RX.
476 frame->mii_stdelim = SIS_MII_STARTDELIM;
477 frame->mii_opcode = SIS_MII_READOP;
478 frame->mii_turnaround = 0;
484 SIO_SET(SIS_MII_DIR);
489 * Send command/address info.
491 sis_mii_send(sc, frame->mii_stdelim, 2);
492 sis_mii_send(sc, frame->mii_opcode, 2);
493 sis_mii_send(sc, frame->mii_phyaddr, 5);
494 sis_mii_send(sc, frame->mii_regaddr, 5);
497 SIO_CLR((SIS_MII_CLK|SIS_MII_DATA));
499 SIO_SET(SIS_MII_CLK);
503 SIO_CLR(SIS_MII_DIR);
506 SIO_CLR(SIS_MII_CLK);
508 ack = CSR_READ_4(sc, SIS_EECTL) & SIS_MII_DATA;
509 SIO_SET(SIS_MII_CLK);
513 * Now try reading data bits. If the ack failed, we still
514 * need to clock through 16 cycles to keep the PHY(s) in sync.
517 for(i = 0; i < 16; i++) {
518 SIO_CLR(SIS_MII_CLK);
520 SIO_SET(SIS_MII_CLK);
526 for (i = 0x8000; i; i >>= 1) {
527 SIO_CLR(SIS_MII_CLK);
530 if (CSR_READ_4(sc, SIS_EECTL) & SIS_MII_DATA)
531 frame->mii_data |= i;
534 SIO_SET(SIS_MII_CLK);
540 SIO_CLR(SIS_MII_CLK);
542 SIO_SET(SIS_MII_CLK);
551 * Write to a PHY register through the MII.
554 sis_mii_writereg(struct sis_softc *sc, struct sis_mii_frame *frame)
558 * Set up frame for TX.
561 frame->mii_stdelim = SIS_MII_STARTDELIM;
562 frame->mii_opcode = SIS_MII_WRITEOP;
563 frame->mii_turnaround = SIS_MII_TURNAROUND;
566 * Turn on data output.
568 SIO_SET(SIS_MII_DIR);
572 sis_mii_send(sc, frame->mii_stdelim, 2);
573 sis_mii_send(sc, frame->mii_opcode, 2);
574 sis_mii_send(sc, frame->mii_phyaddr, 5);
575 sis_mii_send(sc, frame->mii_regaddr, 5);
576 sis_mii_send(sc, frame->mii_turnaround, 2);
577 sis_mii_send(sc, frame->mii_data, 16);
580 SIO_SET(SIS_MII_CLK);
582 SIO_CLR(SIS_MII_CLK);
588 SIO_CLR(SIS_MII_DIR);
594 sis_miibus_readreg(device_t dev, int phy, int reg)
596 struct sis_softc *sc;
597 struct sis_mii_frame frame;
599 sc = device_get_softc(dev);
601 if (sc->sis_type == SIS_TYPE_83815) {
605 * The NatSemi chip can take a while after
606 * a reset to come ready, during which the BMSR
607 * returns a value of 0. This is *never* supposed
608 * to happen: some of the BMSR bits are meant to
609 * be hardwired in the on position, and this can
610 * confuse the miibus code a bit during the probe
611 * and attach phase. So we make an effort to check
612 * for this condition and wait for it to clear.
614 if (!CSR_READ_4(sc, NS_BMSR))
616 return CSR_READ_4(sc, NS_BMCR + (reg * 4));
620 * Chipsets < SIS_635 seem not to be able to read/write
621 * through mdio. Use the enhanced PHY access register
624 if (sc->sis_type == SIS_TYPE_900 &&
625 sc->sis_rev < SIS_REV_635) {
631 CSR_WRITE_4(sc, SIS_PHYCTL,
632 (phy << 11) | (reg << 6) | SIS_PHYOP_READ);
633 SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
635 for (i = 0; i < SIS_TIMEOUT; i++) {
636 if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
640 if (i == SIS_TIMEOUT) {
641 device_printf(sc->sis_dev, "PHY failed to come ready\n");
645 val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF;
652 bzero((char *)&frame, sizeof(frame));
654 frame.mii_phyaddr = phy;
655 frame.mii_regaddr = reg;
656 sis_mii_readreg(sc, &frame);
658 return(frame.mii_data);
663 sis_miibus_writereg(device_t dev, int phy, int reg, int data)
665 struct sis_softc *sc;
666 struct sis_mii_frame frame;
668 sc = device_get_softc(dev);
670 if (sc->sis_type == SIS_TYPE_83815) {
673 CSR_WRITE_4(sc, NS_BMCR + (reg * 4), data);
678 * Chipsets < SIS_635 seem not to be able to read/write
679 * through mdio. Use the enhanced PHY access register
682 if (sc->sis_type == SIS_TYPE_900 &&
683 sc->sis_rev < SIS_REV_635) {
689 CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) |
690 (reg << 6) | SIS_PHYOP_WRITE);
691 SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
693 for (i = 0; i < SIS_TIMEOUT; i++) {
694 if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
698 if (i == SIS_TIMEOUT)
699 device_printf(sc->sis_dev, "PHY failed to come ready\n");
701 bzero((char *)&frame, sizeof(frame));
703 frame.mii_phyaddr = phy;
704 frame.mii_regaddr = reg;
705 frame.mii_data = data;
706 sis_mii_writereg(sc, &frame);
712 sis_miibus_statchg(device_t dev)
714 struct sis_softc *sc;
716 sc = device_get_softc(dev);
722 sis_mchash(struct sis_softc *sc, const uint8_t *addr)
726 /* Compute CRC for the address value. */
727 crc = ether_crc32_be(addr, ETHER_ADDR_LEN);
730 * return the filter bit position
732 * The NatSemi chip has a 512-bit filter, which is
733 * different than the SiS, so we special-case it.
735 if (sc->sis_type == SIS_TYPE_83815)
737 else if (sc->sis_rev >= SIS_REV_635 ||
738 sc->sis_rev == SIS_REV_900B)
745 sis_setmulti_ns(struct sis_softc *sc)
748 struct ifmultiaddr *ifma;
749 u_int32_t h = 0, i, filtsave;
754 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
755 SIS_CLRBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH);
756 SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
761 * We have to explicitly enable the multicast hash table
762 * on the NatSemi chip if we want to use it, which we do.
764 SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH);
765 SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
767 filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
769 /* first, zot all the existing hash bits */
770 for (i = 0; i < 32; i++) {
771 CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + (i*2));
772 CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0);
776 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
777 if (ifma->ifma_addr->sa_family != AF_LINK)
780 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
783 CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + index);
786 SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << bit));
790 CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
796 sis_setmulti_sis(struct sis_softc *sc)
799 struct ifmultiaddr *ifma;
800 u_int32_t h, i, n, ctl;
801 u_int16_t hashes[16];
805 /* hash table size */
806 if (sc->sis_rev >= SIS_REV_635 ||
807 sc->sis_rev == SIS_REV_900B)
812 ctl = CSR_READ_4(sc, SIS_RXFILT_CTL) & SIS_RXFILTCTL_ENABLE;
814 if (ifp->if_flags & IFF_BROADCAST)
815 ctl |= SIS_RXFILTCTL_BROAD;
817 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
818 ctl |= SIS_RXFILTCTL_ALLMULTI;
819 if (ifp->if_flags & IFF_PROMISC)
820 ctl |= SIS_RXFILTCTL_BROAD|SIS_RXFILTCTL_ALLPHYS;
821 for (i = 0; i < n; i++)
824 for (i = 0; i < n; i++)
828 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
829 if (ifma->ifma_addr->sa_family != AF_LINK)
832 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
833 hashes[h >> 4] |= 1 << (h & 0xf);
838 ctl |= SIS_RXFILTCTL_ALLMULTI;
839 for (i = 0; i < n; i++)
844 for (i = 0; i < n; i++) {
845 CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + i) << 16);
846 CSR_WRITE_4(sc, SIS_RXFILT_DATA, hashes[i]);
849 CSR_WRITE_4(sc, SIS_RXFILT_CTL, ctl);
853 sis_reset(struct sis_softc *sc)
857 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET);
859 for (i = 0; i < SIS_TIMEOUT; i++) {
860 if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET))
864 if (i == SIS_TIMEOUT)
865 device_printf(sc->sis_dev, "reset never completed\n");
867 /* Wait a little while for the chip to get its brains in order. */
871 * If this is a NetSemi chip, make sure to clear
874 if (sc->sis_type == SIS_TYPE_83815) {
875 CSR_WRITE_4(sc, NS_CLKRUN, NS_CLKRUN_PMESTS);
876 CSR_WRITE_4(sc, NS_CLKRUN, 0);
883 * Probe for an SiS chip. Check the PCI vendor and device
884 * IDs against our list and return a device name if we find a match.
887 sis_probe(device_t dev)
893 while(t->sis_name != NULL) {
894 if ((pci_get_vendor(dev) == t->sis_vid) &&
895 (pci_get_device(dev) == t->sis_did)) {
896 device_set_desc(dev, t->sis_name);
897 return (BUS_PROBE_DEFAULT);
906 * Attach the interface. Allocate softc structures, do ifmedia
907 * setup and ethernet/BPF attach.
910 sis_attach(device_t dev)
912 u_char eaddr[ETHER_ADDR_LEN];
913 struct sis_softc *sc;
915 int error = 0, waittime = 0;
918 sc = device_get_softc(dev);
922 mtx_init(&sc->sis_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
924 callout_init_mtx(&sc->sis_stat_ch, &sc->sis_mtx, 0);
926 if (pci_get_device(dev) == SIS_DEVICEID_900)
927 sc->sis_type = SIS_TYPE_900;
928 if (pci_get_device(dev) == SIS_DEVICEID_7016)
929 sc->sis_type = SIS_TYPE_7016;
930 if (pci_get_vendor(dev) == NS_VENDORID)
931 sc->sis_type = SIS_TYPE_83815;
933 sc->sis_rev = pci_read_config(dev, PCIR_REVID, 1);
935 * Map control/status registers.
937 pci_enable_busmaster(dev);
939 error = bus_alloc_resources(dev, sis_res_spec, sc->sis_res);
941 device_printf(dev, "couldn't allocate resources\n");
945 /* Reset the adapter. */
948 if (sc->sis_type == SIS_TYPE_900 &&
949 (sc->sis_rev == SIS_REV_635 ||
950 sc->sis_rev == SIS_REV_900B)) {
951 SIO_SET(SIS_CFG_RND_CNT);
952 SIO_SET(SIS_CFG_PERR_DETECT);
956 * Get station address from the EEPROM.
958 switch (pci_get_vendor(dev)) {
960 sc->sis_srr = CSR_READ_4(sc, NS_SRR);
962 /* We can't update the device description, so spew */
963 if (sc->sis_srr == NS_SRR_15C)
964 device_printf(dev, "Silicon Revision: DP83815C\n");
965 else if (sc->sis_srr == NS_SRR_15D)
966 device_printf(dev, "Silicon Revision: DP83815D\n");
967 else if (sc->sis_srr == NS_SRR_16A)
968 device_printf(dev, "Silicon Revision: DP83816A\n");
970 device_printf(dev, "Silicon Revision %x\n", sc->sis_srr);
973 * Reading the MAC address out of the EEPROM on
974 * the NatSemi chip takes a bit more work than
975 * you'd expect. The address spans 4 16-bit words,
976 * with the first word containing only a single bit.
977 * You have to shift everything over one bit to
978 * get it aligned properly. Also, the bits are
979 * stored backwards (the LSB is really the MSB,
980 * and so on) so you have to reverse them in order
981 * to get the MAC address into the form we want.
982 * Why? Who the hell knows.
987 sis_read_eeprom(sc, (caddr_t)&tmp,
988 NS_EE_NODEADDR, 4, 0);
990 /* Shift everything over one bit. */
991 tmp[3] = tmp[3] >> 1;
992 tmp[3] |= tmp[2] << 15;
993 tmp[2] = tmp[2] >> 1;
994 tmp[2] |= tmp[1] << 15;
995 tmp[1] = tmp[1] >> 1;
996 tmp[1] |= tmp[0] << 15;
998 /* Now reverse all the bits. */
999 tmp[3] = sis_reverse(tmp[3]);
1000 tmp[2] = sis_reverse(tmp[2]);
1001 tmp[1] = sis_reverse(tmp[1]);
1003 bcopy((char *)&tmp[1], eaddr, ETHER_ADDR_LEN);
1008 #if defined(__i386__) || defined(__amd64__)
1010 * If this is a SiS 630E chipset with an embedded
1011 * SiS 900 controller, we have to read the MAC address
1012 * from the APC CMOS RAM. Our method for doing this
1013 * is very ugly since we have to reach out and grab
1014 * ahold of hardware for which we cannot properly
1015 * allocate resources. This code is only compiled on
1016 * the i386 architecture since the SiS 630E chipset
1017 * is for x86 motherboards only. Note that there are
1018 * a lot of magic numbers in this hack. These are
1019 * taken from SiS's Linux driver. I'd like to replace
1020 * them with proper symbolic definitions, but that
1021 * requires some datasheets that I don't have access
1024 if (sc->sis_rev == SIS_REV_630S ||
1025 sc->sis_rev == SIS_REV_630E ||
1026 sc->sis_rev == SIS_REV_630EA1)
1027 sis_read_cmos(sc, dev, (caddr_t)&eaddr, 0x9, 6);
1029 else if (sc->sis_rev == SIS_REV_635 ||
1030 sc->sis_rev == SIS_REV_630ET)
1031 sis_read_mac(sc, dev, (caddr_t)&eaddr);
1032 else if (sc->sis_rev == SIS_REV_96x) {
1033 /* Allow to read EEPROM from LAN. It is shared
1034 * between a 1394 controller and the NIC and each
1035 * time we access it, we need to set SIS_EECMD_REQ.
1037 SIO_SET(SIS_EECMD_REQ);
1038 for (waittime = 0; waittime < SIS_TIMEOUT;
1040 /* Force EEPROM to idle state. */
1041 sis_eeprom_idle(sc);
1042 if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECMD_GNT) {
1043 sis_read_eeprom(sc, (caddr_t)&eaddr,
1044 SIS_EE_NODEADDR, 3, 0);
1050 * Set SIS_EECTL_CLK to high, so a other master
1051 * can operate on the i2c bus.
1053 SIO_SET(SIS_EECTL_CLK);
1054 /* Refuse EEPROM access by LAN */
1055 SIO_SET(SIS_EECMD_DONE);
1058 sis_read_eeprom(sc, (caddr_t)&eaddr,
1059 SIS_EE_NODEADDR, 3, 0);
1064 * Allocate the parent bus DMA tag appropriate for PCI.
1066 #define SIS_NSEG_NEW 32
1067 error = bus_dma_tag_create(NULL, /* parent */
1068 1, 0, /* alignment, boundary */
1069 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
1070 BUS_SPACE_MAXADDR, /* highaddr */
1071 NULL, NULL, /* filter, filterarg */
1072 MAXBSIZE, SIS_NSEG_NEW, /* maxsize, nsegments */
1073 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
1074 BUS_DMA_ALLOCNOW, /* flags */
1075 NULL, NULL, /* lockfunc, lockarg */
1076 &sc->sis_parent_tag);
1081 * Now allocate a tag for the DMA descriptor lists and a chunk
1082 * of DMA-able memory based on the tag. Also obtain the physical
1083 * addresses of the RX and TX ring, which we'll need later.
1084 * All of our lists are allocated as a contiguous block
1087 error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */
1088 1, 0, /* alignment, boundary */
1089 BUS_SPACE_MAXADDR, /* lowaddr */
1090 BUS_SPACE_MAXADDR, /* highaddr */
1091 NULL, NULL, /* filter, filterarg */
1092 SIS_RX_LIST_SZ, 1, /* maxsize,nsegments */
1093 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
1095 busdma_lock_mutex, /* lockfunc */
1096 &Giant, /* lockarg */
1101 error = bus_dmamem_alloc(sc->sis_rx_tag,
1102 (void **)&sc->sis_rx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
1103 &sc->sis_rx_dmamap);
1106 device_printf(dev, "no memory for rx list buffers!\n");
1107 bus_dma_tag_destroy(sc->sis_rx_tag);
1108 sc->sis_rx_tag = NULL;
1112 error = bus_dmamap_load(sc->sis_rx_tag,
1113 sc->sis_rx_dmamap, &(sc->sis_rx_list[0]),
1114 sizeof(struct sis_desc), sis_dma_map_ring,
1115 &sc->sis_rx_paddr, 0);
1118 device_printf(dev, "cannot get address of the rx ring!\n");
1119 bus_dmamem_free(sc->sis_rx_tag,
1120 sc->sis_rx_list, sc->sis_rx_dmamap);
1121 bus_dma_tag_destroy(sc->sis_rx_tag);
1122 sc->sis_rx_tag = NULL;
1126 error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */
1127 1, 0, /* alignment, boundary */
1128 BUS_SPACE_MAXADDR, /* lowaddr */
1129 BUS_SPACE_MAXADDR, /* highaddr */
1130 NULL, NULL, /* filter, filterarg */
1131 SIS_TX_LIST_SZ, 1, /* maxsize,nsegments */
1132 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
1134 busdma_lock_mutex, /* lockfunc */
1135 &Giant, /* lockarg */
1140 error = bus_dmamem_alloc(sc->sis_tx_tag,
1141 (void **)&sc->sis_tx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
1142 &sc->sis_tx_dmamap);
1145 device_printf(dev, "no memory for tx list buffers!\n");
1146 bus_dma_tag_destroy(sc->sis_tx_tag);
1147 sc->sis_tx_tag = NULL;
1151 error = bus_dmamap_load(sc->sis_tx_tag,
1152 sc->sis_tx_dmamap, &(sc->sis_tx_list[0]),
1153 sizeof(struct sis_desc), sis_dma_map_ring,
1154 &sc->sis_tx_paddr, 0);
1157 device_printf(dev, "cannot get address of the tx ring!\n");
1158 bus_dmamem_free(sc->sis_tx_tag,
1159 sc->sis_tx_list, sc->sis_tx_dmamap);
1160 bus_dma_tag_destroy(sc->sis_tx_tag);
1161 sc->sis_tx_tag = NULL;
1165 error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */
1166 1, 0, /* alignment, boundary */
1167 BUS_SPACE_MAXADDR, /* lowaddr */
1168 BUS_SPACE_MAXADDR, /* highaddr */
1169 NULL, NULL, /* filter, filterarg */
1170 MCLBYTES, 1, /* maxsize,nsegments */
1171 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
1173 busdma_lock_mutex, /* lockfunc */
1174 &Giant, /* lockarg */
1180 * Obtain the physical addresses of the RX and TX
1181 * rings which we'll need later in the init routine.
1184 ifp = sc->sis_ifp = if_alloc(IFT_ETHER);
1186 device_printf(dev, "can not if_alloc()\n");
1191 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
1192 ifp->if_mtu = ETHERMTU;
1193 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1194 ifp->if_ioctl = sis_ioctl;
1195 ifp->if_start = sis_start;
1196 ifp->if_watchdog = sis_watchdog;
1197 ifp->if_init = sis_init;
1198 IFQ_SET_MAXLEN(&ifp->if_snd, SIS_TX_LIST_CNT - 1);
1199 ifp->if_snd.ifq_drv_maxlen = SIS_TX_LIST_CNT - 1;
1200 IFQ_SET_READY(&ifp->if_snd);
1205 if (mii_phy_probe(dev, &sc->sis_miibus,
1206 sis_ifmedia_upd, sis_ifmedia_sts)) {
1207 device_printf(dev, "MII without any PHY!\n");
1213 * Call MI attach routine.
1215 ether_ifattach(ifp, eaddr);
1218 * Tell the upper layer(s) we support long frames.
1220 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
1221 ifp->if_capabilities |= IFCAP_VLAN_MTU;
1222 ifp->if_capenable = ifp->if_capabilities;
1223 #ifdef DEVICE_POLLING
1224 ifp->if_capabilities |= IFCAP_POLLING;
1227 /* Hook interrupt last to avoid having to lock softc */
1228 error = bus_setup_intr(dev, sc->sis_res[1], INTR_TYPE_NET | INTR_MPSAFE,
1229 sis_intr, sc, &sc->sis_intrhand);
1232 device_printf(dev, "couldn't set up irq\n");
1233 ether_ifdetach(ifp);
1245 * Shutdown hardware and free up resources. This can be called any
1246 * time after the mutex has been initialized. It is called in both
1247 * the error case in attach and the normal detach case so it needs
1248 * to be careful about only freeing resources that have actually been
1252 sis_detach(device_t dev)
1254 struct sis_softc *sc;
1257 sc = device_get_softc(dev);
1258 KASSERT(mtx_initialized(&sc->sis_mtx), ("sis mutex not initialized"));
1261 #ifdef DEVICE_POLLING
1262 if (ifp->if_capenable & IFCAP_POLLING)
1263 ether_poll_deregister(ifp);
1266 /* These should only be active if attach succeeded. */
1267 if (device_is_attached(dev)) {
1272 callout_drain(&sc->sis_stat_ch);
1273 ether_ifdetach(ifp);
1276 device_delete_child(dev, sc->sis_miibus);
1277 bus_generic_detach(dev);
1279 if (sc->sis_intrhand)
1280 bus_teardown_intr(dev, sc->sis_res[1], sc->sis_intrhand);
1281 bus_release_resources(dev, sis_res_spec, sc->sis_res);
1286 if (sc->sis_rx_tag) {
1287 bus_dmamap_unload(sc->sis_rx_tag,
1289 bus_dmamem_free(sc->sis_rx_tag,
1290 sc->sis_rx_list, sc->sis_rx_dmamap);
1291 bus_dma_tag_destroy(sc->sis_rx_tag);
1293 if (sc->sis_tx_tag) {
1294 bus_dmamap_unload(sc->sis_tx_tag,
1296 bus_dmamem_free(sc->sis_tx_tag,
1297 sc->sis_tx_list, sc->sis_tx_dmamap);
1298 bus_dma_tag_destroy(sc->sis_tx_tag);
1300 if (sc->sis_parent_tag)
1301 bus_dma_tag_destroy(sc->sis_parent_tag);
1303 bus_dma_tag_destroy(sc->sis_tag);
1305 mtx_destroy(&sc->sis_mtx);
1311 * Initialize the TX and RX descriptors and allocate mbufs for them. Note that
1312 * we arrange the descriptors in a closed ring, so that the last descriptor
1313 * points back to the first.
1316 sis_ring_init(struct sis_softc *sc)
1319 struct sis_desc *dp;
1321 dp = &sc->sis_tx_list[0];
1322 for (i = 0; i < SIS_TX_LIST_CNT; i++, dp++) {
1323 if (i == (SIS_TX_LIST_CNT - 1))
1324 dp->sis_nextdesc = &sc->sis_tx_list[0];
1326 dp->sis_nextdesc = dp + 1;
1327 bus_dmamap_load(sc->sis_tx_tag,
1329 dp->sis_nextdesc, sizeof(struct sis_desc),
1330 sis_dma_map_desc_next, dp, 0);
1331 dp->sis_mbuf = NULL;
1336 sc->sis_tx_prod = sc->sis_tx_cons = sc->sis_tx_cnt = 0;
1338 bus_dmamap_sync(sc->sis_tx_tag,
1339 sc->sis_tx_dmamap, BUS_DMASYNC_PREWRITE);
1341 dp = &sc->sis_rx_list[0];
1342 for (i = 0; i < SIS_RX_LIST_CNT; i++, dp++) {
1343 error = sis_newbuf(sc, dp, NULL);
1346 if (i == (SIS_RX_LIST_CNT - 1))
1347 dp->sis_nextdesc = &sc->sis_rx_list[0];
1349 dp->sis_nextdesc = dp + 1;
1350 bus_dmamap_load(sc->sis_rx_tag,
1352 dp->sis_nextdesc, sizeof(struct sis_desc),
1353 sis_dma_map_desc_next, dp, 0);
1356 bus_dmamap_sync(sc->sis_rx_tag,
1357 sc->sis_rx_dmamap, BUS_DMASYNC_PREWRITE);
1359 sc->sis_rx_pdsc = &sc->sis_rx_list[0];
1365 * Initialize an RX descriptor and attach an MBUF cluster.
1368 sis_newbuf(struct sis_softc *sc, struct sis_desc *c, struct mbuf *m)
1375 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
1379 m->m_data = m->m_ext.ext_buf;
1382 c->sis_ctl = SIS_RXLEN;
1384 bus_dmamap_create(sc->sis_tag, 0, &c->sis_map);
1385 bus_dmamap_load(sc->sis_tag, c->sis_map,
1386 mtod(m, void *), MCLBYTES,
1387 sis_dma_map_desc_ptr, c, 0);
1388 bus_dmamap_sync(sc->sis_tag, c->sis_map, BUS_DMASYNC_PREREAD);
1394 * A frame has been uploaded: pass the resulting mbuf chain up to
1395 * the higher level protocols.
1398 sis_rxeof(struct sis_softc *sc)
1400 struct mbuf *m, *m0;
1402 struct sis_desc *cur_rx;
1406 SIS_LOCK_ASSERT(sc);
1410 for(cur_rx = sc->sis_rx_pdsc; SIS_OWNDESC(cur_rx);
1411 cur_rx = cur_rx->sis_nextdesc) {
1413 #ifdef DEVICE_POLLING
1414 if (ifp->if_capenable & IFCAP_POLLING) {
1415 if (sc->rxcycles <= 0)
1420 rxstat = cur_rx->sis_rxstat;
1421 bus_dmamap_sync(sc->sis_tag,
1422 cur_rx->sis_map, BUS_DMASYNC_POSTWRITE);
1423 bus_dmamap_unload(sc->sis_tag, cur_rx->sis_map);
1424 bus_dmamap_destroy(sc->sis_tag, cur_rx->sis_map);
1425 m = cur_rx->sis_mbuf;
1426 cur_rx->sis_mbuf = NULL;
1427 total_len = SIS_RXBYTES(cur_rx);
1430 * If an error occurs, update stats, clear the
1431 * status word and leave the mbuf cluster in place:
1432 * it should simply get re-used next time this descriptor
1433 * comes up in the ring.
1435 if (!(rxstat & SIS_CMDSTS_PKT_OK)) {
1437 if (rxstat & SIS_RXSTAT_COLL)
1438 ifp->if_collisions++;
1439 sis_newbuf(sc, cur_rx, m);
1443 /* No errors; receive the packet. */
1444 #ifdef __NO_STRICT_ALIGNMENT
1446 * On architectures without alignment problems we try to
1447 * allocate a new buffer for the receive ring, and pass up
1448 * the one where the packet is already, saving the expensive
1449 * copy done in m_devget().
1450 * If we are on an architecture with alignment problems, or
1451 * if the allocation fails, then use m_devget and leave the
1452 * existing buffer in the receive ring.
1454 if (sis_newbuf(sc, cur_rx, NULL) == 0)
1455 m->m_pkthdr.len = m->m_len = total_len;
1459 m0 = m_devget(mtod(m, char *), total_len,
1460 ETHER_ALIGN, ifp, NULL);
1461 sis_newbuf(sc, cur_rx, m);
1470 m->m_pkthdr.rcvif = ifp;
1473 (*ifp->if_input)(ifp, m);
1477 sc->sis_rx_pdsc = cur_rx;
1481 sis_rxeoc(struct sis_softc *sc)
1484 SIS_LOCK_ASSERT(sc);
1490 * A frame was downloaded to the chip. It's safe for us to clean up
1495 sis_txeof(struct sis_softc *sc)
1500 SIS_LOCK_ASSERT(sc);
1504 * Go through our tx list and free mbufs for those
1505 * frames that have been transmitted.
1507 for (idx = sc->sis_tx_cons; sc->sis_tx_cnt > 0;
1508 sc->sis_tx_cnt--, SIS_INC(idx, SIS_TX_LIST_CNT) ) {
1509 struct sis_desc *cur_tx = &sc->sis_tx_list[idx];
1511 if (SIS_OWNDESC(cur_tx))
1514 if (cur_tx->sis_ctl & SIS_CMDSTS_MORE)
1517 if (!(cur_tx->sis_ctl & SIS_CMDSTS_PKT_OK)) {
1519 if (cur_tx->sis_txstat & SIS_TXSTAT_EXCESSCOLLS)
1520 ifp->if_collisions++;
1521 if (cur_tx->sis_txstat & SIS_TXSTAT_OUTOFWINCOLL)
1522 ifp->if_collisions++;
1525 ifp->if_collisions +=
1526 (cur_tx->sis_txstat & SIS_TXSTAT_COLLCNT) >> 16;
1529 if (cur_tx->sis_mbuf != NULL) {
1530 m_freem(cur_tx->sis_mbuf);
1531 cur_tx->sis_mbuf = NULL;
1532 bus_dmamap_unload(sc->sis_tag, cur_tx->sis_map);
1533 bus_dmamap_destroy(sc->sis_tag, cur_tx->sis_map);
1537 if (idx != sc->sis_tx_cons) {
1538 /* we freed up some buffers */
1539 sc->sis_tx_cons = idx;
1540 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1543 ifp->if_timer = (sc->sis_tx_cnt == 0) ? 0 : 5;
1551 struct sis_softc *sc;
1552 struct mii_data *mii;
1556 SIS_LOCK_ASSERT(sc);
1560 mii = device_get_softc(sc->sis_miibus);
1563 if (!sc->sis_link && mii->mii_media_status & IFM_ACTIVE &&
1564 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
1566 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1570 callout_reset(&sc->sis_stat_ch, hz, sis_tick, sc);
1574 #ifdef DEVICE_POLLING
1575 static poll_handler_t sis_poll;
1578 sis_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
1580 struct sis_softc *sc = ifp->if_softc;
1583 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
1589 * On the sis, reading the status register also clears it.
1590 * So before returning to intr mode we must make sure that all
1591 * possible pending sources of interrupts have been served.
1592 * In practice this means run to completion the *eof routines,
1593 * and then call the interrupt routine
1595 sc->rxcycles = count;
1598 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1601 if (sc->rxcycles > 0 || cmd == POLL_AND_CHECK_STATUS) {
1604 /* Reading the ISR register clears all interrupts. */
1605 status = CSR_READ_4(sc, SIS_ISR);
1607 if (status & (SIS_ISR_RX_ERR|SIS_ISR_RX_OFLOW))
1610 if (status & (SIS_ISR_RX_IDLE))
1611 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
1613 if (status & SIS_ISR_SYSERR) {
1621 #endif /* DEVICE_POLLING */
1626 struct sis_softc *sc;
1633 if (sc->sis_stopped) /* Most likely shared interrupt */
1637 #ifdef DEVICE_POLLING
1638 if (ifp->if_capenable & IFCAP_POLLING) {
1644 /* Disable interrupts. */
1645 CSR_WRITE_4(sc, SIS_IER, 0);
1648 SIS_LOCK_ASSERT(sc);
1649 /* Reading the ISR register clears all interrupts. */
1650 status = CSR_READ_4(sc, SIS_ISR);
1652 if ((status & SIS_INTRS) == 0)
1656 (SIS_ISR_TX_DESC_OK | SIS_ISR_TX_ERR |
1657 SIS_ISR_TX_OK | SIS_ISR_TX_IDLE) )
1660 if (status & (SIS_ISR_RX_DESC_OK|SIS_ISR_RX_OK|SIS_ISR_RX_IDLE))
1663 if (status & (SIS_ISR_RX_ERR | SIS_ISR_RX_OFLOW))
1666 if (status & (SIS_ISR_RX_IDLE))
1667 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
1669 if (status & SIS_ISR_SYSERR) {
1675 /* Re-enable interrupts. */
1676 CSR_WRITE_4(sc, SIS_IER, 1);
1678 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
1685 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
1686 * pointers to the fragment pointers.
1689 sis_encap(struct sis_softc *sc, struct mbuf **m_head, uint32_t *txidx)
1691 struct sis_desc *f = NULL;
1693 int frag, cur, cnt = 0, chainlen = 0;
1696 * If there's no way we can send any packets, return now.
1698 if (SIS_TX_LIST_CNT - sc->sis_tx_cnt < 2)
1702 * Count the number of frags in this chain to see if
1703 * we need to m_defrag. Since the descriptor list is shared
1704 * by all packets, we'll m_defrag long chains so that they
1705 * do not use up the entire list, even if they would fit.
1708 for (m = *m_head; m != NULL; m = m->m_next)
1711 if ((chainlen > SIS_TX_LIST_CNT / 4) ||
1712 ((SIS_TX_LIST_CNT - (chainlen + sc->sis_tx_cnt)) < 2)) {
1713 m = m_defrag(*m_head, M_DONTWAIT);
1720 * Start packing the mbufs in this chain into
1721 * the fragment pointers. Stop when we run out
1722 * of fragments or hit the end of the mbuf chain.
1724 cur = frag = *txidx;
1726 for (m = *m_head; m != NULL; m = m->m_next) {
1727 if (m->m_len != 0) {
1728 if ((SIS_TX_LIST_CNT -
1729 (sc->sis_tx_cnt + cnt)) < 2)
1731 f = &sc->sis_tx_list[frag];
1732 f->sis_ctl = SIS_CMDSTS_MORE | m->m_len;
1733 bus_dmamap_create(sc->sis_tag, 0, &f->sis_map);
1734 bus_dmamap_load(sc->sis_tag, f->sis_map,
1735 mtod(m, void *), m->m_len,
1736 sis_dma_map_desc_ptr, f, 0);
1737 bus_dmamap_sync(sc->sis_tag,
1738 f->sis_map, BUS_DMASYNC_PREREAD);
1740 f->sis_ctl |= SIS_CMDSTS_OWN;
1742 SIS_INC(frag, SIS_TX_LIST_CNT);
1750 sc->sis_tx_list[cur].sis_mbuf = *m_head;
1751 sc->sis_tx_list[cur].sis_ctl &= ~SIS_CMDSTS_MORE;
1752 sc->sis_tx_list[*txidx].sis_ctl |= SIS_CMDSTS_OWN;
1753 sc->sis_tx_cnt += cnt;
1760 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
1761 * to the mbuf data regions directly in the transmit lists. We also save a
1762 * copy of the pointers since the transmit list fragment pointers are
1763 * physical addresses.
1767 sis_start(struct ifnet *ifp)
1769 struct sis_softc *sc;
1778 sis_startl(struct ifnet *ifp)
1780 struct sis_softc *sc;
1781 struct mbuf *m_head = NULL;
1782 u_int32_t idx, queued = 0;
1786 SIS_LOCK_ASSERT(sc);
1791 idx = sc->sis_tx_prod;
1793 if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
1796 while(sc->sis_tx_list[idx].sis_mbuf == NULL) {
1797 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
1801 if (sis_encap(sc, &m_head, &idx)) {
1802 IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
1803 ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1810 * If there's a BPF listener, bounce a copy of this frame
1813 BPF_MTAP(ifp, m_head);
1819 sc->sis_tx_prod = idx;
1820 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE);
1823 * Set a timeout in case the chip goes out to lunch.
1832 struct sis_softc *sc = xsc;
1840 sis_initl(struct sis_softc *sc)
1842 struct ifnet *ifp = sc->sis_ifp;
1843 struct mii_data *mii;
1845 SIS_LOCK_ASSERT(sc);
1848 * Cancel pending I/O and free all RX/TX buffers.
1851 sc->sis_stopped = 0;
1854 if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr >= NS_SRR_16A) {
1856 * Configure 400usec of interrupt holdoff. This is based
1857 * on emperical tests on a Soekris 4801.
1859 CSR_WRITE_4(sc, NS_IHR, 0x100 | 4);
1863 mii = device_get_softc(sc->sis_miibus);
1865 /* Set MAC address */
1866 if (sc->sis_type == SIS_TYPE_83815) {
1867 CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR0);
1868 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1869 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[0]);
1870 CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR1);
1871 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1872 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[1]);
1873 CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR2);
1874 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1875 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[2]);
1877 CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
1878 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1879 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[0]);
1880 CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1);
1881 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1882 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[1]);
1883 CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
1884 CSR_WRITE_4(sc, SIS_RXFILT_DATA,
1885 ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[2]);
1888 /* Init circular TX/RX lists. */
1889 if (sis_ring_init(sc) != 0) {
1890 device_printf(sc->sis_dev,
1891 "initialization failed: no memory for rx buffers\n");
1897 * Short Cable Receive Errors (MP21.E)
1898 * also: Page 78 of the DP83815 data sheet (september 2002 version)
1899 * recommends the following register settings "for optimum
1900 * performance." for rev 15C. The driver from NS also sets
1901 * the PHY_CR register for later versions.
1903 if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr <= NS_SRR_15D) {
1904 CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
1905 CSR_WRITE_4(sc, NS_PHY_CR, 0x189C);
1906 if (sc->sis_srr == NS_SRR_15C) {
1907 /* set val for c2 */
1908 CSR_WRITE_4(sc, NS_PHY_TDATA, 0x0000);
1910 CSR_WRITE_4(sc, NS_PHY_DSPCFG, 0x5040);
1911 /* rais SD off, from 4 to c */
1912 CSR_WRITE_4(sc, NS_PHY_SDCFG, 0x008C);
1914 CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
1919 * For the NatSemi chip, we have to explicitly enable the
1920 * reception of ARP frames, as well as turn on the 'perfect
1921 * match' filter where we store the station address, otherwise
1922 * we won't receive unicasts meant for this host.
1924 if (sc->sis_type == SIS_TYPE_83815) {
1925 SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_ARP);
1926 SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_PERFECT);
1929 /* If we want promiscuous mode, set the allframes bit. */
1930 if (ifp->if_flags & IFF_PROMISC) {
1931 SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
1933 SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
1937 * Set the capture broadcast bit to capture broadcast frames.
1939 if (ifp->if_flags & IFF_BROADCAST) {
1940 SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
1942 SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
1946 * Load the multicast filter.
1948 if (sc->sis_type == SIS_TYPE_83815)
1949 sis_setmulti_ns(sc);
1951 sis_setmulti_sis(sc);
1953 /* Turn the receive filter on */
1954 SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE);
1957 * Load the address of the RX and TX lists.
1959 CSR_WRITE_4(sc, SIS_RX_LISTPTR, sc->sis_rx_paddr);
1960 CSR_WRITE_4(sc, SIS_TX_LISTPTR, sc->sis_tx_paddr);
1962 /* SIS_CFG_EDB_MASTER_EN indicates the EDB bus is used instead of
1963 * the PCI bus. When this bit is set, the Max DMA Burst Size
1964 * for TX/RX DMA should be no larger than 16 double words.
1966 if (CSR_READ_4(sc, SIS_CFG) & SIS_CFG_EDB_MASTER_EN) {
1967 CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG64);
1969 CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG256);
1972 /* Accept Long Packets for VLAN support */
1973 SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_JABBER);
1975 /* Set TX configuration */
1976 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) {
1977 CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_10);
1979 CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_100);
1982 /* Set full/half duplex mode. */
1983 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
1984 SIS_SETBIT(sc, SIS_TX_CFG,
1985 (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
1986 SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
1988 SIS_CLRBIT(sc, SIS_TX_CFG,
1989 (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
1990 SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
1993 if (sc->sis_type == SIS_TYPE_83816) {
1995 * MPII03.D: Half Duplex Excessive Collisions.
1996 * Also page 49 in 83816 manual
1998 SIS_SETBIT(sc, SIS_TX_CFG, SIS_TXCFG_MPII03D);
2001 if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr < NS_SRR_16A &&
2002 IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
2006 * Short Cable Receive Errors (MP21.E)
2008 CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
2009 reg = CSR_READ_4(sc, NS_PHY_DSPCFG) & 0xfff;
2010 CSR_WRITE_4(sc, NS_PHY_DSPCFG, reg | 0x1000);
2012 reg = CSR_READ_4(sc, NS_PHY_TDATA) & 0xff;
2013 if ((reg & 0x0080) == 0 || (reg > 0xd8 && reg <= 0xff)) {
2014 device_printf(sc->sis_dev,
2015 "Applying short cable fix (reg=%x)\n", reg);
2016 CSR_WRITE_4(sc, NS_PHY_TDATA, 0x00e8);
2017 reg = CSR_READ_4(sc, NS_PHY_DSPCFG);
2018 SIS_SETBIT(sc, NS_PHY_DSPCFG, reg | 0x20);
2020 CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
2024 * Enable interrupts.
2026 CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS);
2027 #ifdef DEVICE_POLLING
2029 * ... only enable interrupts if we are not polling, make sure
2030 * they are off otherwise.
2032 if (ifp->if_capenable & IFCAP_POLLING)
2033 CSR_WRITE_4(sc, SIS_IER, 0);
2036 CSR_WRITE_4(sc, SIS_IER, 1);
2038 /* Enable receiver and transmitter. */
2039 SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
2040 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
2046 ifp->if_drv_flags |= IFF_DRV_RUNNING;
2047 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
2050 callout_reset(&sc->sis_stat_ch, hz, sis_tick, sc);
2054 * Set media options.
2057 sis_ifmedia_upd(struct ifnet *ifp)
2059 struct sis_softc *sc;
2060 struct mii_data *mii;
2065 mii = device_get_softc(sc->sis_miibus);
2067 if (mii->mii_instance) {
2068 struct mii_softc *miisc;
2069 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
2070 mii_phy_reset(miisc);
2079 * Report current media status.
2082 sis_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
2084 struct sis_softc *sc;
2085 struct mii_data *mii;
2090 mii = device_get_softc(sc->sis_miibus);
2093 ifmr->ifm_active = mii->mii_media_active;
2094 ifmr->ifm_status = mii->mii_media_status;
2098 sis_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
2100 struct sis_softc *sc = ifp->if_softc;
2101 struct ifreq *ifr = (struct ifreq *) data;
2102 struct mii_data *mii;
2108 if (ifp->if_flags & IFF_UP) {
2110 } else if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
2119 if (sc->sis_type == SIS_TYPE_83815)
2120 sis_setmulti_ns(sc);
2122 sis_setmulti_sis(sc);
2128 mii = device_get_softc(sc->sis_miibus);
2129 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
2132 /* ok, disable interrupts */
2133 #ifdef DEVICE_POLLING
2134 if (ifr->ifr_reqcap & IFCAP_POLLING &&
2135 !(ifp->if_capenable & IFCAP_POLLING)) {
2136 error = ether_poll_register(sis_poll, ifp);
2140 /* Disable interrupts */
2141 CSR_WRITE_4(sc, SIS_IER, 0);
2142 ifp->if_capenable |= IFCAP_POLLING;
2147 if (!(ifr->ifr_reqcap & IFCAP_POLLING) &&
2148 ifp->if_capenable & IFCAP_POLLING) {
2149 error = ether_poll_deregister(ifp);
2150 /* Enable interrupts. */
2152 CSR_WRITE_4(sc, SIS_IER, 1);
2153 ifp->if_capenable &= ~IFCAP_POLLING;
2157 #endif /* DEVICE_POLLING */
2160 error = ether_ioctl(ifp, command, data);
2168 sis_watchdog(struct ifnet *ifp)
2170 struct sis_softc *sc;
2175 if (sc->sis_stopped) {
2181 if_printf(ifp, "watchdog timeout\n");
2187 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
2194 * Stop the adapter and free any mbufs allocated to the
2198 sis_stop(struct sis_softc *sc)
2202 struct sis_desc *dp;
2204 if (sc->sis_stopped)
2206 SIS_LOCK_ASSERT(sc);
2210 callout_stop(&sc->sis_stat_ch);
2212 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
2213 CSR_WRITE_4(sc, SIS_IER, 0);
2214 CSR_WRITE_4(sc, SIS_IMR, 0);
2215 CSR_READ_4(sc, SIS_ISR); /* clear any interrupts already pending */
2216 SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
2218 CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0);
2219 CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0);
2224 * Free data in the RX lists.
2226 dp = &sc->sis_rx_list[0];
2227 for (i = 0; i < SIS_RX_LIST_CNT; i++, dp++) {
2228 if (dp->sis_mbuf == NULL)
2230 bus_dmamap_unload(sc->sis_tag, dp->sis_map);
2231 bus_dmamap_destroy(sc->sis_tag, dp->sis_map);
2232 m_freem(dp->sis_mbuf);
2233 dp->sis_mbuf = NULL;
2235 bzero(sc->sis_rx_list, SIS_RX_LIST_SZ);
2238 * Free the TX list buffers.
2240 dp = &sc->sis_tx_list[0];
2241 for (i = 0; i < SIS_TX_LIST_CNT; i++, dp++) {
2242 if (dp->sis_mbuf == NULL)
2244 bus_dmamap_unload(sc->sis_tag, dp->sis_map);
2245 bus_dmamap_destroy(sc->sis_tag, dp->sis_map);
2246 m_freem(dp->sis_mbuf);
2247 dp->sis_mbuf = NULL;
2250 bzero(sc->sis_tx_list, SIS_TX_LIST_SZ);
2252 sc->sis_stopped = 1;
2256 * Stop all chip I/O so that the kernel's probe routines don't
2257 * get confused by errant DMAs when rebooting.
2260 sis_shutdown(device_t dev)
2262 struct sis_softc *sc;
2264 sc = device_get_softc(dev);
2271 static device_method_t sis_methods[] = {
2272 /* Device interface */
2273 DEVMETHOD(device_probe, sis_probe),
2274 DEVMETHOD(device_attach, sis_attach),
2275 DEVMETHOD(device_detach, sis_detach),
2276 DEVMETHOD(device_shutdown, sis_shutdown),
2279 DEVMETHOD(bus_print_child, bus_generic_print_child),
2280 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
2283 DEVMETHOD(miibus_readreg, sis_miibus_readreg),
2284 DEVMETHOD(miibus_writereg, sis_miibus_writereg),
2285 DEVMETHOD(miibus_statchg, sis_miibus_statchg),
2290 static driver_t sis_driver = {
2293 sizeof(struct sis_softc)
2296 static devclass_t sis_devclass;
2298 DRIVER_MODULE(sis, pci, sis_driver, sis_devclass, 0, 0);
2299 DRIVER_MODULE(miibus, sis, miibus_driver, miibus_devclass, 0, 0);