2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/sockio.h>
40 #include <sys/malloc.h>
41 #include <sys/kernel.h>
42 #include <sys/module.h>
43 #include <sys/socket.h>
44 #include <sys/sysctl.h>
47 #include <net/if_arp.h>
48 #include <net/ethernet.h>
49 #include <net/if_dl.h>
50 #include <net/if_media.h>
51 #include <net/if_vlan_var.h>
55 #include <vm/vm.h> /* for vtophys */
56 #include <vm/pmap.h> /* for vtophys */
57 #include <machine/bus_memio.h>
58 #include <machine/bus_pio.h>
59 #include <machine/bus.h>
60 #include <machine/resource.h>
64 #include <dev/mii/mii.h>
65 #include <dev/mii/miivar.h>
67 #include <dev/pci/pcireg.h>
68 #include <dev/pci/pcivar.h>
70 /* "controller miibus0" required. See GENERIC if you get errors here. */
71 #include "miibus_if.h"
73 #define STE_USEIOSPACE
75 #include <pci/if_stereg.h>
77 MODULE_DEPEND(ste, pci, 1, 1, 1);
78 MODULE_DEPEND(ste, ether, 1, 1, 1);
79 MODULE_DEPEND(ste, miibus, 1, 1, 1);
82 * Various supported device vendors/types and their names.
84 static struct ste_type ste_devs[] = {
85 { ST_VENDORID, ST_DEVICEID_ST201, "Sundance ST201 10/100BaseTX" },
86 { DL_VENDORID, DL_DEVICEID_DL10050, "D-Link DL10050 10/100BaseTX" },
90 static int ste_probe (device_t);
91 static int ste_attach (device_t);
92 static int ste_detach (device_t);
93 static void ste_init (void *);
94 static void ste_intr (void *);
95 static void ste_rxeoc (struct ste_softc *);
96 static void ste_rxeof (struct ste_softc *);
97 static void ste_txeoc (struct ste_softc *);
98 static void ste_txeof (struct ste_softc *);
99 static void ste_stats_update (void *);
100 static void ste_stop (struct ste_softc *);
101 static void ste_reset (struct ste_softc *);
102 static int ste_ioctl (struct ifnet *, u_long, caddr_t);
103 static int ste_encap (struct ste_softc *, struct ste_chain *,
105 static void ste_start (struct ifnet *);
106 static void ste_watchdog (struct ifnet *);
107 static void ste_shutdown (device_t);
108 static int ste_newbuf (struct ste_softc *,
109 struct ste_chain_onefrag *,
111 static int ste_ifmedia_upd (struct ifnet *);
112 static void ste_ifmedia_sts (struct ifnet *, struct ifmediareq *);
114 static void ste_mii_sync (struct ste_softc *);
115 static void ste_mii_send (struct ste_softc *, u_int32_t, int);
116 static int ste_mii_readreg (struct ste_softc *, struct ste_mii_frame *);
117 static int ste_mii_writereg (struct ste_softc *, struct ste_mii_frame *);
118 static int ste_miibus_readreg (device_t, int, int);
119 static int ste_miibus_writereg (device_t, int, int, int);
120 static void ste_miibus_statchg (device_t);
122 static int ste_eeprom_wait (struct ste_softc *);
123 static int ste_read_eeprom (struct ste_softc *, caddr_t, int, int, int);
124 static void ste_wait (struct ste_softc *);
125 static void ste_setmulti (struct ste_softc *);
126 static int ste_init_rx_list (struct ste_softc *);
127 static void ste_init_tx_list (struct ste_softc *);
129 #ifdef STE_USEIOSPACE
130 #define STE_RES SYS_RES_IOPORT
131 #define STE_RID STE_PCI_LOIO
133 #define STE_RES SYS_RES_MEMORY
134 #define STE_RID STE_PCI_LOMEM
137 static device_method_t ste_methods[] = {
138 /* Device interface */
139 DEVMETHOD(device_probe, ste_probe),
140 DEVMETHOD(device_attach, ste_attach),
141 DEVMETHOD(device_detach, ste_detach),
142 DEVMETHOD(device_shutdown, ste_shutdown),
145 DEVMETHOD(bus_print_child, bus_generic_print_child),
146 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
149 DEVMETHOD(miibus_readreg, ste_miibus_readreg),
150 DEVMETHOD(miibus_writereg, ste_miibus_writereg),
151 DEVMETHOD(miibus_statchg, ste_miibus_statchg),
156 static driver_t ste_driver = {
159 sizeof(struct ste_softc)
162 static devclass_t ste_devclass;
164 DRIVER_MODULE(ste, pci, ste_driver, ste_devclass, 0, 0);
165 DRIVER_MODULE(miibus, ste, miibus_driver, miibus_devclass, 0, 0);
167 SYSCTL_NODE(_hw, OID_AUTO, ste, CTLFLAG_RD, 0, "if_ste parameters");
169 static int ste_rxsyncs;
170 SYSCTL_INT(_hw_ste, OID_AUTO, rxsyncs, CTLFLAG_RW, &ste_rxsyncs, 0, "");
172 #define STE_SETBIT4(sc, reg, x) \
173 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
175 #define STE_CLRBIT4(sc, reg, x) \
176 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
178 #define STE_SETBIT2(sc, reg, x) \
179 CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) | (x))
181 #define STE_CLRBIT2(sc, reg, x) \
182 CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) & ~(x))
184 #define STE_SETBIT1(sc, reg, x) \
185 CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) | (x))
187 #define STE_CLRBIT1(sc, reg, x) \
188 CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) & ~(x))
191 #define MII_SET(x) STE_SETBIT1(sc, STE_PHYCTL, x)
192 #define MII_CLR(x) STE_CLRBIT1(sc, STE_PHYCTL, x)
195 * Sync the PHYs by setting data bit and strobing the clock 32 times.
199 struct ste_softc *sc;
203 MII_SET(STE_PHYCTL_MDIR|STE_PHYCTL_MDATA);
205 for (i = 0; i < 32; i++) {
206 MII_SET(STE_PHYCTL_MCLK);
208 MII_CLR(STE_PHYCTL_MCLK);
216 * Clock a series of bits through the MII.
219 ste_mii_send(sc, bits, cnt)
220 struct ste_softc *sc;
226 MII_CLR(STE_PHYCTL_MCLK);
228 for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
230 MII_SET(STE_PHYCTL_MDATA);
232 MII_CLR(STE_PHYCTL_MDATA);
235 MII_CLR(STE_PHYCTL_MCLK);
237 MII_SET(STE_PHYCTL_MCLK);
242 * Read an PHY register through the MII.
245 ste_mii_readreg(sc, frame)
246 struct ste_softc *sc;
247 struct ste_mii_frame *frame;
255 * Set up frame for RX.
257 frame->mii_stdelim = STE_MII_STARTDELIM;
258 frame->mii_opcode = STE_MII_READOP;
259 frame->mii_turnaround = 0;
262 CSR_WRITE_2(sc, STE_PHYCTL, 0);
266 MII_SET(STE_PHYCTL_MDIR);
271 * Send command/address info.
273 ste_mii_send(sc, frame->mii_stdelim, 2);
274 ste_mii_send(sc, frame->mii_opcode, 2);
275 ste_mii_send(sc, frame->mii_phyaddr, 5);
276 ste_mii_send(sc, frame->mii_regaddr, 5);
279 MII_CLR(STE_PHYCTL_MDIR);
282 MII_CLR((STE_PHYCTL_MCLK|STE_PHYCTL_MDATA));
284 MII_SET(STE_PHYCTL_MCLK);
288 MII_CLR(STE_PHYCTL_MCLK);
290 ack = CSR_READ_2(sc, STE_PHYCTL) & STE_PHYCTL_MDATA;
291 MII_SET(STE_PHYCTL_MCLK);
295 * Now try reading data bits. If the ack failed, we still
296 * need to clock through 16 cycles to keep the PHY(s) in sync.
299 for(i = 0; i < 16; i++) {
300 MII_CLR(STE_PHYCTL_MCLK);
302 MII_SET(STE_PHYCTL_MCLK);
308 for (i = 0x8000; i; i >>= 1) {
309 MII_CLR(STE_PHYCTL_MCLK);
312 if (CSR_READ_2(sc, STE_PHYCTL) & STE_PHYCTL_MDATA)
313 frame->mii_data |= i;
316 MII_SET(STE_PHYCTL_MCLK);
322 MII_CLR(STE_PHYCTL_MCLK);
324 MII_SET(STE_PHYCTL_MCLK);
335 * Write to a PHY register through the MII.
338 ste_mii_writereg(sc, frame)
339 struct ste_softc *sc;
340 struct ste_mii_frame *frame;
346 * Set up frame for TX.
349 frame->mii_stdelim = STE_MII_STARTDELIM;
350 frame->mii_opcode = STE_MII_WRITEOP;
351 frame->mii_turnaround = STE_MII_TURNAROUND;
354 * Turn on data output.
356 MII_SET(STE_PHYCTL_MDIR);
360 ste_mii_send(sc, frame->mii_stdelim, 2);
361 ste_mii_send(sc, frame->mii_opcode, 2);
362 ste_mii_send(sc, frame->mii_phyaddr, 5);
363 ste_mii_send(sc, frame->mii_regaddr, 5);
364 ste_mii_send(sc, frame->mii_turnaround, 2);
365 ste_mii_send(sc, frame->mii_data, 16);
368 MII_SET(STE_PHYCTL_MCLK);
370 MII_CLR(STE_PHYCTL_MCLK);
376 MII_CLR(STE_PHYCTL_MDIR);
384 ste_miibus_readreg(dev, phy, reg)
388 struct ste_softc *sc;
389 struct ste_mii_frame frame;
391 sc = device_get_softc(dev);
393 if ( sc->ste_one_phy && phy != 0 )
396 bzero((char *)&frame, sizeof(frame));
398 frame.mii_phyaddr = phy;
399 frame.mii_regaddr = reg;
400 ste_mii_readreg(sc, &frame);
402 return(frame.mii_data);
406 ste_miibus_writereg(dev, phy, reg, data)
410 struct ste_softc *sc;
411 struct ste_mii_frame frame;
413 sc = device_get_softc(dev);
414 bzero((char *)&frame, sizeof(frame));
416 frame.mii_phyaddr = phy;
417 frame.mii_regaddr = reg;
418 frame.mii_data = data;
420 ste_mii_writereg(sc, &frame);
426 ste_miibus_statchg(dev)
429 struct ste_softc *sc;
430 struct mii_data *mii;
432 sc = device_get_softc(dev);
434 mii = device_get_softc(sc->ste_miibus);
436 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
437 STE_SETBIT2(sc, STE_MACCTL0, STE_MACCTL0_FULLDUPLEX);
439 STE_CLRBIT2(sc, STE_MACCTL0, STE_MACCTL0_FULLDUPLEX);
450 struct ste_softc *sc;
451 struct mii_data *mii;
454 mii = device_get_softc(sc->ste_miibus);
456 if (mii->mii_instance) {
457 struct mii_softc *miisc;
458 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
459 mii_phy_reset(miisc);
467 ste_ifmedia_sts(ifp, ifmr)
469 struct ifmediareq *ifmr;
471 struct ste_softc *sc;
472 struct mii_data *mii;
475 mii = device_get_softc(sc->ste_miibus);
478 ifmr->ifm_active = mii->mii_media_active;
479 ifmr->ifm_status = mii->mii_media_status;
486 struct ste_softc *sc;
490 for (i = 0; i < STE_TIMEOUT; i++) {
491 if (!(CSR_READ_4(sc, STE_DMACTL) & STE_DMACTL_DMA_HALTINPROG))
495 if (i == STE_TIMEOUT)
496 printf("ste%d: command never completed!\n", sc->ste_unit);
502 * The EEPROM is slow: give it time to come ready after issuing
507 struct ste_softc *sc;
513 for (i = 0; i < 100; i++) {
514 if (CSR_READ_2(sc, STE_EEPROM_CTL) & STE_EECTL_BUSY)
521 printf("ste%d: eeprom failed to come ready\n", sc->ste_unit);
529 * Read a sequence of words from the EEPROM. Note that ethernet address
530 * data is stored in the EEPROM in network byte order.
533 ste_read_eeprom(sc, dest, off, cnt, swap)
534 struct ste_softc *sc;
541 u_int16_t word = 0, *ptr;
543 if (ste_eeprom_wait(sc))
546 for (i = 0; i < cnt; i++) {
547 CSR_WRITE_2(sc, STE_EEPROM_CTL, STE_EEOPCODE_READ | (off + i));
548 err = ste_eeprom_wait(sc);
551 word = CSR_READ_2(sc, STE_EEPROM_DATA);
552 ptr = (u_int16_t *)(dest + (i * 2));
564 struct ste_softc *sc;
568 u_int32_t hashes[2] = { 0, 0 };
569 struct ifmultiaddr *ifma;
571 ifp = &sc->arpcom.ac_if;
572 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
573 STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_ALLMULTI);
574 STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_MULTIHASH);
578 /* first, zot all the existing hash bits */
579 CSR_WRITE_2(sc, STE_MAR0, 0);
580 CSR_WRITE_2(sc, STE_MAR1, 0);
581 CSR_WRITE_2(sc, STE_MAR2, 0);
582 CSR_WRITE_2(sc, STE_MAR3, 0);
584 /* now program new ones */
585 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
586 if (ifma->ifma_addr->sa_family != AF_LINK)
588 h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
589 ifma->ifma_addr), ETHER_ADDR_LEN) & 0x3F;
591 hashes[0] |= (1 << h);
593 hashes[1] |= (1 << (h - 32));
596 CSR_WRITE_2(sc, STE_MAR0, hashes[0] & 0xFFFF);
597 CSR_WRITE_2(sc, STE_MAR1, (hashes[0] >> 16) & 0xFFFF);
598 CSR_WRITE_2(sc, STE_MAR2, hashes[1] & 0xFFFF);
599 CSR_WRITE_2(sc, STE_MAR3, (hashes[1] >> 16) & 0xFFFF);
600 STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_ALLMULTI);
601 STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_MULTIHASH);
606 #ifdef DEVICE_POLLING
607 static poll_handler_t ste_poll;
610 ste_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
612 struct ste_softc *sc = ifp->if_softc;
615 if (!(ifp->if_capenable & IFCAP_POLLING)) {
616 ether_poll_deregister(ifp);
617 cmd = POLL_DEREGISTER;
619 if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */
620 CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
624 sc->rxcycles = count;
625 if (cmd == POLL_AND_CHECK_STATUS)
629 if (ifp->if_snd.ifq_head != NULL)
632 if (cmd == POLL_AND_CHECK_STATUS) {
635 status = CSR_READ_2(sc, STE_ISR_ACK);
637 if (status & STE_ISR_TX_DONE)
640 if (status & STE_ISR_STATS_OFLOW) {
641 untimeout(ste_stats_update, sc, sc->ste_stat_ch);
642 ste_stats_update(sc);
645 if (status & STE_ISR_LINKEVENT)
646 mii_pollstat(device_get_softc(sc->ste_miibus));
648 if (status & STE_ISR_HOSTERR) {
656 #endif /* DEVICE_POLLING */
662 struct ste_softc *sc;
668 ifp = &sc->arpcom.ac_if;
670 #ifdef DEVICE_POLLING
671 if (ifp->if_flags & IFF_POLLING)
673 if ((ifp->if_capenable & IFCAP_POLLING) &&
674 ether_poll_register(ste_poll, ifp)) { /* ok, disable interrupts */
675 CSR_WRITE_2(sc, STE_IMR, 0);
679 #endif /* DEVICE_POLLING */
681 /* See if this is really our interrupt. */
682 if (!(CSR_READ_2(sc, STE_ISR) & STE_ISR_INTLATCH)) {
688 status = CSR_READ_2(sc, STE_ISR_ACK);
690 if (!(status & STE_INTRS))
693 if (status & STE_ISR_RX_DMADONE) {
698 if (status & STE_ISR_TX_DMADONE)
701 if (status & STE_ISR_TX_DONE)
704 if (status & STE_ISR_STATS_OFLOW) {
705 untimeout(ste_stats_update, sc, sc->ste_stat_ch);
706 ste_stats_update(sc);
709 if (status & STE_ISR_LINKEVENT)
710 mii_pollstat(device_get_softc(sc->ste_miibus));
713 if (status & STE_ISR_HOSTERR) {
719 /* Re-enable interrupts */
720 CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
722 if (ifp->if_snd.ifq_head != NULL)
725 #ifdef DEVICE_POLLING
727 #endif /* DEVICE_POLLING */
734 ste_rxeoc(struct ste_softc *sc)
736 struct ste_chain_onefrag *cur_rx;
740 if (sc->ste_cdata.ste_rx_head->ste_ptr->ste_status == 0) {
741 cur_rx = sc->ste_cdata.ste_rx_head;
743 cur_rx = cur_rx->ste_next;
744 /* If the ring is empty, just return. */
745 if (cur_rx == sc->ste_cdata.ste_rx_head)
747 } while (cur_rx->ste_ptr->ste_status == 0);
748 if (sc->ste_cdata.ste_rx_head->ste_ptr->ste_status == 0) {
749 /* We've fallen behind the chip: catch it. */
750 sc->ste_cdata.ste_rx_head = cur_rx;
757 * A frame has been uploaded: pass the resulting mbuf chain up to
758 * the higher level protocols.
762 struct ste_softc *sc;
766 struct ste_chain_onefrag *cur_rx;
767 int total_len = 0, count=0;
772 ifp = &sc->arpcom.ac_if;
774 while((rxstat = sc->ste_cdata.ste_rx_head->ste_ptr->ste_status)
775 & STE_RXSTAT_DMADONE) {
776 #ifdef DEVICE_POLLING
777 if (ifp->if_flags & IFF_POLLING) {
778 if (sc->rxcycles <= 0)
782 #endif /* DEVICE_POLLING */
783 if ((STE_RX_LIST_CNT - count) < 3) {
787 cur_rx = sc->ste_cdata.ste_rx_head;
788 sc->ste_cdata.ste_rx_head = cur_rx->ste_next;
791 * If an error occurs, update stats, clear the
792 * status word and leave the mbuf cluster in place:
793 * it should simply get re-used next time this descriptor
794 * comes up in the ring.
796 if (rxstat & STE_RXSTAT_FRAME_ERR) {
798 cur_rx->ste_ptr->ste_status = 0;
803 * If there error bit was not set, the upload complete
804 * bit should be set which means we have a valid packet.
805 * If not, something truly strange has happened.
807 if (!(rxstat & STE_RXSTAT_DMADONE)) {
808 printf("ste%d: bad receive status -- packet dropped\n",
811 cur_rx->ste_ptr->ste_status = 0;
815 /* No errors; receive the packet. */
816 m = cur_rx->ste_mbuf;
817 total_len = cur_rx->ste_ptr->ste_status & STE_RXSTAT_FRAMELEN;
820 * Try to conjure up a new mbuf cluster. If that
821 * fails, it means we have an out of memory condition and
822 * should leave the buffer in place and continue. This will
823 * result in a lost packet, but there's little else we
824 * can do in this situation.
826 if (ste_newbuf(sc, cur_rx, NULL) == ENOBUFS) {
828 cur_rx->ste_ptr->ste_status = 0;
832 m->m_pkthdr.rcvif = ifp;
833 m->m_pkthdr.len = m->m_len = total_len;
837 (*ifp->if_input)(ifp, m);
840 cur_rx->ste_ptr->ste_status = 0;
849 struct ste_softc *sc;
854 ifp = &sc->arpcom.ac_if;
856 while ((txstat = CSR_READ_1(sc, STE_TX_STATUS)) &
857 STE_TXSTATUS_TXDONE) {
858 if (txstat & STE_TXSTATUS_UNDERRUN ||
859 txstat & STE_TXSTATUS_EXCESSCOLLS ||
860 txstat & STE_TXSTATUS_RECLAIMERR) {
862 printf("ste%d: transmission error: %x\n",
863 sc->ste_unit, txstat);
868 if (txstat & STE_TXSTATUS_UNDERRUN &&
869 sc->ste_tx_thresh < STE_PACKET_SIZE) {
870 sc->ste_tx_thresh += STE_MIN_FRAMELEN;
871 printf("ste%d: tx underrun, increasing tx"
872 " start threshold to %d bytes\n",
873 sc->ste_unit, sc->ste_tx_thresh);
875 CSR_WRITE_2(sc, STE_TX_STARTTHRESH, sc->ste_tx_thresh);
876 CSR_WRITE_2(sc, STE_TX_RECLAIM_THRESH,
877 (STE_PACKET_SIZE >> 4));
880 CSR_WRITE_2(sc, STE_TX_STATUS, txstat);
888 struct ste_softc *sc;
890 struct ste_chain *cur_tx;
894 ifp = &sc->arpcom.ac_if;
896 idx = sc->ste_cdata.ste_tx_cons;
897 while(idx != sc->ste_cdata.ste_tx_prod) {
898 cur_tx = &sc->ste_cdata.ste_tx_chain[idx];
900 if (!(cur_tx->ste_ptr->ste_ctl & STE_TXCTL_DMADONE))
903 m_freem(cur_tx->ste_mbuf);
904 cur_tx->ste_mbuf = NULL;
905 ifp->if_flags &= ~IFF_OACTIVE;
908 STE_INC(idx, STE_TX_LIST_CNT);
911 sc->ste_cdata.ste_tx_cons = idx;
912 if (idx == sc->ste_cdata.ste_tx_prod)
917 ste_stats_update(xsc)
920 struct ste_softc *sc;
922 struct mii_data *mii;
927 ifp = &sc->arpcom.ac_if;
928 mii = device_get_softc(sc->ste_miibus);
930 ifp->if_collisions += CSR_READ_1(sc, STE_LATE_COLLS)
931 + CSR_READ_1(sc, STE_MULTI_COLLS)
932 + CSR_READ_1(sc, STE_SINGLE_COLLS);
936 if (mii->mii_media_status & IFM_ACTIVE &&
937 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
940 * we don't get a call-back on re-init so do it
941 * otherwise we get stuck in the wrong link state
943 ste_miibus_statchg(sc->ste_dev);
944 if (ifp->if_snd.ifq_head != NULL)
949 sc->ste_stat_ch = timeout(ste_stats_update, sc, hz);
957 * Probe for a Sundance ST201 chip. Check the PCI vendor and device
958 * IDs against our list and return a device name if we find a match.
968 while(t->ste_name != NULL) {
969 if ((pci_get_vendor(dev) == t->ste_vid) &&
970 (pci_get_device(dev) == t->ste_did)) {
971 device_set_desc(dev, t->ste_name);
981 * Attach the interface. Allocate softc structures, do ifmedia
982 * setup and ethernet/BPF attach.
988 struct ste_softc *sc;
990 int unit, error = 0, rid;
992 sc = device_get_softc(dev);
993 unit = device_get_unit(dev);
997 * Only use one PHY since this chip reports multiple
998 * Note on the DFE-550 the PHY is at 1 on the DFE-580
999 * it is at 0 & 1. It is rev 0x12.
1001 if (pci_get_vendor(dev) == DL_VENDORID &&
1002 pci_get_device(dev) == DL_DEVICEID_DL10050 &&
1003 pci_get_revid(dev) == 0x12 )
1004 sc->ste_one_phy = 1;
1006 mtx_init(&sc->ste_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
1007 MTX_DEF | MTX_RECURSE);
1008 #ifndef BURN_BRIDGES
1010 * Handle power management nonsense.
1012 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
1013 u_int32_t iobase, membase, irq;
1015 /* Save important PCI config data. */
1016 iobase = pci_read_config(dev, STE_PCI_LOIO, 4);
1017 membase = pci_read_config(dev, STE_PCI_LOMEM, 4);
1018 irq = pci_read_config(dev, STE_PCI_INTLINE, 4);
1020 /* Reset the power state. */
1021 printf("ste%d: chip is in D%d power mode "
1022 "-- setting to D0\n", unit,
1023 pci_get_powerstate(dev));
1024 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
1026 /* Restore PCI config data. */
1027 pci_write_config(dev, STE_PCI_LOIO, iobase, 4);
1028 pci_write_config(dev, STE_PCI_LOMEM, membase, 4);
1029 pci_write_config(dev, STE_PCI_INTLINE, irq, 4);
1033 * Map control/status registers.
1035 pci_enable_busmaster(dev);
1038 sc->ste_res = bus_alloc_resource_any(dev, STE_RES, &rid, RF_ACTIVE);
1040 if (sc->ste_res == NULL) {
1041 printf ("ste%d: couldn't map ports/memory\n", unit);
1046 sc->ste_btag = rman_get_bustag(sc->ste_res);
1047 sc->ste_bhandle = rman_get_bushandle(sc->ste_res);
1049 /* Allocate interrupt */
1051 sc->ste_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1052 RF_SHAREABLE | RF_ACTIVE);
1054 if (sc->ste_irq == NULL) {
1055 printf("ste%d: couldn't map interrupt\n", unit);
1060 callout_handle_init(&sc->ste_stat_ch);
1062 /* Reset the adapter. */
1066 * Get station address from the EEPROM.
1068 if (ste_read_eeprom(sc, (caddr_t)&sc->arpcom.ac_enaddr,
1069 STE_EEADDR_NODE0, 3, 0)) {
1070 printf("ste%d: failed to read station address\n", unit);
1075 sc->ste_unit = unit;
1077 /* Allocate the descriptor queues. */
1078 sc->ste_ldata = contigmalloc(sizeof(struct ste_list_data), M_DEVBUF,
1079 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
1081 if (sc->ste_ldata == NULL) {
1082 printf("ste%d: no memory for list buffers!\n", unit);
1087 bzero(sc->ste_ldata, sizeof(struct ste_list_data));
1090 if (mii_phy_probe(dev, &sc->ste_miibus,
1091 ste_ifmedia_upd, ste_ifmedia_sts)) {
1092 printf("ste%d: MII without any phy!\n", sc->ste_unit);
1097 ifp = &sc->arpcom.ac_if;
1099 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
1100 ifp->if_mtu = ETHERMTU;
1101 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1102 ifp->if_ioctl = ste_ioctl;
1103 ifp->if_start = ste_start;
1104 ifp->if_watchdog = ste_watchdog;
1105 ifp->if_init = ste_init;
1106 ifp->if_baudrate = 10000000;
1107 ifp->if_snd.ifq_maxlen = STE_TX_LIST_CNT - 1;
1109 sc->ste_tx_thresh = STE_TXSTART_THRESH;
1112 * Call MI attach routine.
1114 ether_ifattach(ifp, sc->arpcom.ac_enaddr);
1117 * Tell the upper layer(s) we support long frames.
1119 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
1120 ifp->if_capabilities |= IFCAP_VLAN_MTU;
1121 #ifdef DEVICE_POLLING
1122 ifp->if_capabilities |= IFCAP_POLLING;
1124 ifp->if_capenable = ifp->if_capabilities;
1126 /* Hook interrupt last to avoid having to lock softc */
1127 error = bus_setup_intr(dev, sc->ste_irq, INTR_TYPE_NET,
1128 ste_intr, sc, &sc->ste_intrhand);
1131 printf("ste%d: couldn't set up irq\n", unit);
1132 ether_ifdetach(ifp);
1144 * Shutdown hardware and free up resources. This can be called any
1145 * time after the mutex has been initialized. It is called in both
1146 * the error case in attach and the normal detach case so it needs
1147 * to be careful about only freeing resources that have actually been
1154 struct ste_softc *sc;
1157 sc = device_get_softc(dev);
1158 KASSERT(mtx_initialized(&sc->ste_mtx), ("ste mutex not initialized"));
1160 ifp = &sc->arpcom.ac_if;
1162 /* These should only be active if attach succeeded */
1163 if (device_is_attached(dev)) {
1165 ether_ifdetach(ifp);
1168 device_delete_child(dev, sc->ste_miibus);
1169 bus_generic_detach(dev);
1171 if (sc->ste_intrhand)
1172 bus_teardown_intr(dev, sc->ste_irq, sc->ste_intrhand);
1174 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ste_irq);
1176 bus_release_resource(dev, STE_RES, STE_RID, sc->ste_res);
1178 if (sc->ste_ldata) {
1179 contigfree(sc->ste_ldata, sizeof(struct ste_list_data),
1184 mtx_destroy(&sc->ste_mtx);
1190 ste_newbuf(sc, c, m)
1191 struct ste_softc *sc;
1192 struct ste_chain_onefrag *c;
1195 struct mbuf *m_new = NULL;
1198 MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1201 MCLGET(m_new, M_DONTWAIT);
1202 if (!(m_new->m_flags & M_EXT)) {
1206 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
1209 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
1210 m_new->m_data = m_new->m_ext.ext_buf;
1213 m_adj(m_new, ETHER_ALIGN);
1215 c->ste_mbuf = m_new;
1216 c->ste_ptr->ste_status = 0;
1217 c->ste_ptr->ste_frag.ste_addr = vtophys(mtod(m_new, caddr_t));
1218 c->ste_ptr->ste_frag.ste_len = (1536 + ETHER_VLAN_ENCAP_LEN) | STE_FRAG_LAST;
1224 ste_init_rx_list(sc)
1225 struct ste_softc *sc;
1227 struct ste_chain_data *cd;
1228 struct ste_list_data *ld;
1231 cd = &sc->ste_cdata;
1234 for (i = 0; i < STE_RX_LIST_CNT; i++) {
1235 cd->ste_rx_chain[i].ste_ptr = &ld->ste_rx_list[i];
1236 if (ste_newbuf(sc, &cd->ste_rx_chain[i], NULL) == ENOBUFS)
1238 if (i == (STE_RX_LIST_CNT - 1)) {
1239 cd->ste_rx_chain[i].ste_next =
1240 &cd->ste_rx_chain[0];
1241 ld->ste_rx_list[i].ste_next =
1242 vtophys(&ld->ste_rx_list[0]);
1244 cd->ste_rx_chain[i].ste_next =
1245 &cd->ste_rx_chain[i + 1];
1246 ld->ste_rx_list[i].ste_next =
1247 vtophys(&ld->ste_rx_list[i + 1]);
1249 ld->ste_rx_list[i].ste_status = 0;
1252 cd->ste_rx_head = &cd->ste_rx_chain[0];
1258 ste_init_tx_list(sc)
1259 struct ste_softc *sc;
1261 struct ste_chain_data *cd;
1262 struct ste_list_data *ld;
1265 cd = &sc->ste_cdata;
1267 for (i = 0; i < STE_TX_LIST_CNT; i++) {
1268 cd->ste_tx_chain[i].ste_ptr = &ld->ste_tx_list[i];
1269 cd->ste_tx_chain[i].ste_ptr->ste_next = 0;
1270 cd->ste_tx_chain[i].ste_ptr->ste_ctl = 0;
1271 cd->ste_tx_chain[i].ste_phys = vtophys(&ld->ste_tx_list[i]);
1272 if (i == (STE_TX_LIST_CNT - 1))
1273 cd->ste_tx_chain[i].ste_next =
1274 &cd->ste_tx_chain[0];
1276 cd->ste_tx_chain[i].ste_next =
1277 &cd->ste_tx_chain[i + 1];
1280 cd->ste_tx_prod = 0;
1281 cd->ste_tx_cons = 0;
1290 struct ste_softc *sc;
1296 ifp = &sc->arpcom.ac_if;
1300 /* Init our MAC address */
1301 for (i = 0; i < ETHER_ADDR_LEN; i++) {
1302 CSR_WRITE_1(sc, STE_PAR0 + i, sc->arpcom.ac_enaddr[i]);
1306 if (ste_init_rx_list(sc) == ENOBUFS) {
1307 printf("ste%d: initialization failed: no "
1308 "memory for RX buffers\n", sc->ste_unit);
1314 /* Set RX polling interval */
1315 CSR_WRITE_1(sc, STE_RX_DMAPOLL_PERIOD, 64);
1317 /* Init TX descriptors */
1318 ste_init_tx_list(sc);
1320 /* Set the TX freethresh value */
1321 CSR_WRITE_1(sc, STE_TX_DMABURST_THRESH, STE_PACKET_SIZE >> 8);
1323 /* Set the TX start threshold for best performance. */
1324 CSR_WRITE_2(sc, STE_TX_STARTTHRESH, sc->ste_tx_thresh);
1326 /* Set the TX reclaim threshold. */
1327 CSR_WRITE_1(sc, STE_TX_RECLAIM_THRESH, (STE_PACKET_SIZE >> 4));
1329 /* Set up the RX filter. */
1330 CSR_WRITE_1(sc, STE_RX_MODE, STE_RXMODE_UNICAST);
1332 /* If we want promiscuous mode, set the allframes bit. */
1333 if (ifp->if_flags & IFF_PROMISC) {
1334 STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_PROMISC);
1336 STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_PROMISC);
1339 /* Set capture broadcast bit to accept broadcast frames. */
1340 if (ifp->if_flags & IFF_BROADCAST) {
1341 STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_BROADCAST);
1343 STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_BROADCAST);
1348 /* Load the address of the RX list. */
1349 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
1351 CSR_WRITE_4(sc, STE_RX_DMALIST_PTR,
1352 vtophys(&sc->ste_ldata->ste_rx_list[0]));
1353 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
1354 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
1356 /* Set TX polling interval (defer until we TX first packet */
1357 CSR_WRITE_1(sc, STE_TX_DMAPOLL_PERIOD, 0);
1359 /* Load address of the TX list */
1360 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
1362 CSR_WRITE_4(sc, STE_TX_DMALIST_PTR, 0);
1363 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
1364 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
1366 sc->ste_tx_prev = NULL;
1368 /* Enable receiver and transmitter */
1369 CSR_WRITE_2(sc, STE_MACCTL0, 0);
1370 CSR_WRITE_2(sc, STE_MACCTL1, 0);
1371 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_TX_ENABLE);
1372 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_RX_ENABLE);
1374 /* Enable stats counters. */
1375 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_STATS_ENABLE);
1377 CSR_WRITE_2(sc, STE_ISR, 0xFFFF);
1378 #ifdef DEVICE_POLLING
1379 /* Disable interrupts if we are polling. */
1380 if (ifp->if_flags & IFF_POLLING)
1381 CSR_WRITE_2(sc, STE_IMR, 0);
1383 #endif /* DEVICE_POLLING */
1384 /* Enable interrupts. */
1385 CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
1387 /* Accept VLAN length packets */
1388 CSR_WRITE_2(sc, STE_MAX_FRAMELEN, ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN);
1390 ste_ifmedia_upd(ifp);
1392 ifp->if_flags |= IFF_RUNNING;
1393 ifp->if_flags &= ~IFF_OACTIVE;
1395 sc->ste_stat_ch = timeout(ste_stats_update, sc, hz);
1403 struct ste_softc *sc;
1409 ifp = &sc->arpcom.ac_if;
1411 untimeout(ste_stats_update, sc, sc->ste_stat_ch);
1412 ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
1413 #ifdef DEVICE_POLLING
1414 ether_poll_deregister(ifp);
1415 #endif /* DEVICE_POLLING */
1417 CSR_WRITE_2(sc, STE_IMR, 0);
1418 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_TX_DISABLE);
1419 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_RX_DISABLE);
1420 STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_STATS_DISABLE);
1421 STE_SETBIT2(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
1422 STE_SETBIT2(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
1425 * Try really hard to stop the RX engine or under heavy RX
1426 * data chip will write into de-allocated memory.
1432 for (i = 0; i < STE_RX_LIST_CNT; i++) {
1433 if (sc->ste_cdata.ste_rx_chain[i].ste_mbuf != NULL) {
1434 m_freem(sc->ste_cdata.ste_rx_chain[i].ste_mbuf);
1435 sc->ste_cdata.ste_rx_chain[i].ste_mbuf = NULL;
1439 for (i = 0; i < STE_TX_LIST_CNT; i++) {
1440 if (sc->ste_cdata.ste_tx_chain[i].ste_mbuf != NULL) {
1441 m_freem(sc->ste_cdata.ste_tx_chain[i].ste_mbuf);
1442 sc->ste_cdata.ste_tx_chain[i].ste_mbuf = NULL;
1446 bzero(sc->ste_ldata, sizeof(struct ste_list_data));
1454 struct ste_softc *sc;
1458 STE_SETBIT4(sc, STE_ASICCTL,
1459 STE_ASICCTL_GLOBAL_RESET|STE_ASICCTL_RX_RESET|
1460 STE_ASICCTL_TX_RESET|STE_ASICCTL_DMA_RESET|
1461 STE_ASICCTL_FIFO_RESET|STE_ASICCTL_NETWORK_RESET|
1462 STE_ASICCTL_AUTOINIT_RESET|STE_ASICCTL_HOST_RESET|
1463 STE_ASICCTL_EXTRESET_RESET);
1467 for (i = 0; i < STE_TIMEOUT; i++) {
1468 if (!(CSR_READ_4(sc, STE_ASICCTL) & STE_ASICCTL_RESET_BUSY))
1472 if (i == STE_TIMEOUT)
1473 printf("ste%d: global reset never completed\n", sc->ste_unit);
1479 ste_ioctl(ifp, command, data)
1484 struct ste_softc *sc;
1486 struct mii_data *mii;
1491 ifr = (struct ifreq *)data;
1495 if (ifp->if_flags & IFF_UP) {
1496 if (ifp->if_flags & IFF_RUNNING &&
1497 ifp->if_flags & IFF_PROMISC &&
1498 !(sc->ste_if_flags & IFF_PROMISC)) {
1499 STE_SETBIT1(sc, STE_RX_MODE,
1500 STE_RXMODE_PROMISC);
1501 } else if (ifp->if_flags & IFF_RUNNING &&
1502 !(ifp->if_flags & IFF_PROMISC) &&
1503 sc->ste_if_flags & IFF_PROMISC) {
1504 STE_CLRBIT1(sc, STE_RX_MODE,
1505 STE_RXMODE_PROMISC);
1507 if (ifp->if_flags & IFF_RUNNING &&
1508 (ifp->if_flags ^ sc->ste_if_flags) & IFF_ALLMULTI)
1510 if (!(ifp->if_flags & IFF_RUNNING)) {
1511 sc->ste_tx_thresh = STE_TXSTART_THRESH;
1515 if (ifp->if_flags & IFF_RUNNING)
1518 sc->ste_if_flags = ifp->if_flags;
1528 mii = device_get_softc(sc->ste_miibus);
1529 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
1532 ifp->if_capenable &= ~IFCAP_POLLING;
1533 ifp->if_capenable |= ifr->ifr_reqcap & IFCAP_POLLING;
1536 error = ether_ioctl(ifp, command, data);
1546 ste_encap(sc, c, m_head)
1547 struct ste_softc *sc;
1548 struct ste_chain *c;
1549 struct mbuf *m_head;
1552 struct ste_frag *f = NULL;
1560 for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
1561 if (m->m_len != 0) {
1562 if (frag == STE_MAXFRAGS)
1564 f = &d->ste_frags[frag];
1565 f->ste_addr = vtophys(mtod(m, vm_offset_t));
1566 f->ste_len = m->m_len;
1575 * We ran out of segments. We have to recopy this
1576 * mbuf chain first. Bail out if we can't get the
1579 mn = m_defrag(m_head, M_DONTWAIT);
1588 c->ste_mbuf = m_head;
1589 d->ste_frags[frag - 1].ste_len |= STE_FRAG_LAST;
1599 struct ste_softc *sc;
1600 struct mbuf *m_head = NULL;
1601 struct ste_chain *cur_tx;
1607 if (!sc->ste_link) {
1612 if (ifp->if_flags & IFF_OACTIVE) {
1617 idx = sc->ste_cdata.ste_tx_prod;
1619 while(sc->ste_cdata.ste_tx_chain[idx].ste_mbuf == NULL) {
1621 * We cannot re-use the last (free) descriptor;
1622 * the chip may not have read its ste_next yet.
1624 if (STE_NEXT(idx, STE_TX_LIST_CNT) ==
1625 sc->ste_cdata.ste_tx_cons) {
1626 ifp->if_flags |= IFF_OACTIVE;
1630 IF_DEQUEUE(&ifp->if_snd, m_head);
1634 cur_tx = &sc->ste_cdata.ste_tx_chain[idx];
1636 if (ste_encap(sc, cur_tx, m_head) != 0)
1639 cur_tx->ste_ptr->ste_next = 0;
1641 if (sc->ste_tx_prev == NULL) {
1642 cur_tx->ste_ptr->ste_ctl = STE_TXCTL_DMAINTR | 1;
1643 /* Load address of the TX list */
1644 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
1647 CSR_WRITE_4(sc, STE_TX_DMALIST_PTR,
1648 vtophys(&sc->ste_ldata->ste_tx_list[0]));
1650 /* Set TX polling interval to start TX engine */
1651 CSR_WRITE_1(sc, STE_TX_DMAPOLL_PERIOD, 64);
1653 STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
1656 cur_tx->ste_ptr->ste_ctl = STE_TXCTL_DMAINTR | 1;
1657 sc->ste_tx_prev->ste_ptr->ste_next
1661 sc->ste_tx_prev = cur_tx;
1664 * If there's a BPF listener, bounce a copy of this frame
1667 BPF_MTAP(ifp, cur_tx->ste_mbuf);
1669 STE_INC(idx, STE_TX_LIST_CNT);
1672 sc->ste_cdata.ste_tx_prod = idx;
1683 struct ste_softc *sc;
1689 printf("ste%d: watchdog timeout\n", sc->ste_unit);
1698 if (ifp->if_snd.ifq_head != NULL)
1709 struct ste_softc *sc;
1711 sc = device_get_softc(dev);