2 * Copyright (c) 1997, 1998
3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
43 * ThunderLAN TX/RX list format. The TX and RX lists are pretty much
44 * identical: the list begins with a 32-bit forward pointer which points
45 * at the next list in the chain, followed by 16 bits for the total
46 * frame size, and a 16 bit status field. This is followed by a series
47 * of 10 32-bit data count/data address pairs that point to the fragments
48 * that make up the complete frame.
51 #define TL_MAXFRAGS 10
52 #define TL_RX_LIST_CNT 64
53 #define TL_TX_LIST_CNT 128
54 #define TL_MIN_FRAMELEN 64
62 u_int32_t tlist_fptr; /* phys address of next list */
63 u_int16_t tlist_cstat; /* status word */
64 u_int16_t tlist_frsize; /* size of data in frame */
65 struct tl_frag tl_frag[TL_MAXFRAGS];
69 * This is a special case of an RX list. By setting the One_Frag
70 * bit in the NETCONFIG register, the driver can force the ThunderLAN
71 * chip to use only one fragment when DMAing RX frames.
74 struct tl_list_onefrag {
76 u_int16_t tlist_cstat;
77 u_int16_t tlist_frsize;
78 struct tl_frag tl_frag;
82 struct tl_list_onefrag tl_rx_list[TL_RX_LIST_CNT];
83 struct tl_list tl_tx_list[TL_TX_LIST_CNT];
84 unsigned char tl_pad[TL_MIN_FRAMELEN];
88 struct tl_list *tl_ptr;
90 struct tl_chain *tl_next;
93 struct tl_chain_onefrag {
94 struct tl_list_onefrag *tl_ptr;
96 struct tl_chain_onefrag *tl_next;
99 struct tl_chain_data {
100 struct tl_chain_onefrag tl_rx_chain[TL_RX_LIST_CNT];
101 struct tl_chain tl_tx_chain[TL_TX_LIST_CNT];
103 struct tl_chain_onefrag *tl_rx_head;
104 struct tl_chain_onefrag *tl_rx_tail;
106 struct tl_chain *tl_tx_head;
107 struct tl_chain *tl_tx_tail;
108 struct tl_chain *tl_tx_free;
112 struct ifnet *tl_ifp;
114 struct ifmedia ifmedia; /* media info */
115 bus_space_handle_t tl_bhandle;
116 bus_space_tag_t tl_btag;
118 struct resource *tl_irq;
119 struct resource *tl_res;
121 struct tl_type *tl_dinfo; /* ThunderLAN adapter info */
123 struct tl_list_data *tl_ldata; /* TX/RX lists and mbufs */
124 struct tl_chain_data tl_cdata;
128 struct callout tl_stat_callout;
132 #define TL_LOCK(_sc) mtx_lock(&(_sc)->tl_mtx)
133 #define TL_UNLOCK(_sc) mtx_unlock(&(_sc)->tl_mtx)
134 #define TL_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tl_mtx, MA_OWNED)
137 * Transmit interrupt threshold.
139 #define TX_THR 0x00000004
142 * General constants that are fun to know.
144 * The ThunderLAN controller is made by Texas Instruments. The
145 * manual indicates that if the EEPROM checksum fails, the PCI
146 * vendor and device ID registers will be loaded with TI-specific
149 #define TI_VENDORID 0x104C
150 #define TI_DEVICEID_THUNDERLAN 0x0500
153 * These are the PCI vendor and device IDs for Compaq ethernet
154 * adapters based on the ThunderLAN controller.
156 #define COMPAQ_VENDORID 0x0E11
157 #define COMPAQ_DEVICEID_NETEL_10_100 0xAE32
158 #define COMPAQ_DEVICEID_NETEL_UNKNOWN 0xAE33
159 #define COMPAQ_DEVICEID_NETEL_10 0xAE34
160 #define COMPAQ_DEVICEID_NETFLEX_3P_INTEGRATED 0xAE35
161 #define COMPAQ_DEVICEID_NETEL_10_100_DUAL 0xAE40
162 #define COMPAQ_DEVICEID_NETEL_10_100_PROLIANT 0xAE43
163 #define COMPAQ_DEVICEID_NETEL_10_100_EMBEDDED 0xB011
164 #define COMPAQ_DEVICEID_NETEL_10_T2_UTP_COAX 0xB012
165 #define COMPAQ_DEVICEID_NETEL_10_100_TX_UTP 0xB030
166 #define COMPAQ_DEVICEID_NETFLEX_3P 0xF130
167 #define COMPAQ_DEVICEID_NETFLEX_3P_BNC 0xF150
170 * These are the PCI vendor and device IDs for Olicom
171 * adapters based on the ThunderLAN controller.
173 #define OLICOM_VENDORID 0x108D
174 #define OLICOM_DEVICEID_OC2183 0x0013
175 #define OLICOM_DEVICEID_OC2325 0x0012
176 #define OLICOM_DEVICEID_OC2326 0x0014
179 * PCI low memory base and low I/O base
181 #define TL_PCI_LOIO 0x10
182 #define TL_PCI_LOMEM 0x14
185 * PCI latency timer (it's actually 0x0D, but we want a value
186 * that's longword aligned).
188 #define TL_PCI_LATENCY_TIMER 0x0C
190 #define TL_DIO_ADDR_INC 0x8000 /* Increment addr on each read */
191 #define TL_DIO_RAM_SEL 0x4000 /* RAM address select */
192 #define TL_DIO_ADDR_MASK 0x3FFF /* address bits mask */
197 #define TL_INTR_INVALID 0x0
198 #define TL_INTR_TXEOF 0x1
199 #define TL_INTR_STATOFLOW 0x2
200 #define TL_INTR_RXEOF 0x3
201 #define TL_INTR_DUMMY 0x4
202 #define TL_INTR_TXEOC 0x5
203 #define TL_INTR_ADCHK 0x6
204 #define TL_INTR_RXEOC 0x7
206 #define TL_INT_MASK 0x001C
207 #define TL_VEC_MASK 0x1FE0
209 * Host command register bits
211 #define TL_CMD_GO 0x80000000
212 #define TL_CMD_STOP 0x40000000
213 #define TL_CMD_ACK 0x20000000
214 #define TL_CMD_CHSEL7 0x10000000
215 #define TL_CMD_CHSEL6 0x08000000
216 #define TL_CMD_CHSEL5 0x04000000
217 #define TL_CMD_CHSEL4 0x02000000
218 #define TL_CMD_CHSEL3 0x01000000
219 #define TL_CMD_CHSEL2 0x00800000
220 #define TL_CMD_CHSEL1 0x00400000
221 #define TL_CMD_CHSEL0 0x00200000
222 #define TL_CMD_EOC 0x00100000
223 #define TL_CMD_RT 0x00080000
224 #define TL_CMD_NES 0x00040000
225 #define TL_CMD_ZERO0 0x00020000
226 #define TL_CMD_ZERO1 0x00010000
227 #define TL_CMD_ADRST 0x00008000
228 #define TL_CMD_LDTMR 0x00004000
229 #define TL_CMD_LDTHR 0x00002000
230 #define TL_CMD_REQINT 0x00001000
231 #define TL_CMD_INTSOFF 0x00000800
232 #define TL_CMD_INTSON 0x00000400
233 #define TL_CMD_RSVD0 0x00000200
234 #define TL_CMD_RSVD1 0x00000100
235 #define TL_CMD_ACK7 0x00000080
236 #define TL_CMD_ACK6 0x00000040
237 #define TL_CMD_ACK5 0x00000020
238 #define TL_CMD_ACK4 0x00000010
239 #define TL_CMD_ACK3 0x00000008
240 #define TL_CMD_ACK2 0x00000004
241 #define TL_CMD_ACK1 0x00000002
242 #define TL_CMD_ACK0 0x00000001
244 #define TL_CMD_CHSEL_MASK 0x01FE0000
245 #define TL_CMD_ACK_MASK 0xFF
248 * EEPROM address where station address resides.
250 #define TL_EEPROM_EADDR 0x83
251 #define TL_EEPROM_EADDR2 0x99
252 #define TL_EEPROM_EADDR3 0xAF
253 #define TL_EEPROM_EADDR_OC 0xF8 /* Olicom cards use a different
254 address than Compaqs. */
256 * ThunderLAN host command register offsets.
257 * (Can be accessed either by IO ports or memory map.)
259 #define TL_HOSTCMD 0x00
260 #define TL_CH_PARM 0x04
261 #define TL_DIO_ADDR 0x08
262 #define TL_HOST_INT 0x0A
263 #define TL_DIO_DATA 0x0C
266 * ThunderLAN internal registers
268 #define TL_NETCMD 0x00
269 #define TL_NETSIO 0x01
270 #define TL_NETSTS 0x02
271 #define TL_NETMASK 0x03
273 #define TL_NETCONFIG 0x04
274 #define TL_MANTEST 0x06
276 #define TL_VENID_LSB 0x08
277 #define TL_VENID_MSB 0x09
278 #define TL_DEVID_LSB 0x0A
279 #define TL_DEVID_MSB 0x0B
281 #define TL_REVISION 0x0C
282 #define TL_SUBCLASS 0x0D
283 #define TL_MINLAT 0x0E
284 #define TL_MAXLAT 0x0F
286 #define TL_AREG0_B5 0x10
287 #define TL_AREG0_B4 0x11
288 #define TL_AREG0_B3 0x12
289 #define TL_AREG0_B2 0x13
291 #define TL_AREG0_B1 0x14
292 #define TL_AREG0_B0 0x15
293 #define TL_AREG1_B5 0x16
294 #define TL_AREG1_B4 0x17
296 #define TL_AREG1_B3 0x18
297 #define TL_AREG1_B2 0x19
298 #define TL_AREG1_B1 0x1A
299 #define TL_AREG1_B0 0x1B
301 #define TL_AREG2_B5 0x1C
302 #define TL_AREG2_B4 0x1D
303 #define TL_AREG2_B3 0x1E
304 #define TL_AREG2_B2 0x1F
306 #define TL_AREG2_B1 0x20
307 #define TL_AREG2_B0 0x21
308 #define TL_AREG3_B5 0x22
309 #define TL_AREG3_B4 0x23
311 #define TL_AREG3_B3 0x24
312 #define TL_AREG3_B2 0x25
313 #define TL_AREG3_B1 0x26
314 #define TL_AREG3_B0 0x27
316 #define TL_HASH1 0x28
317 #define TL_HASH2 0x2C
318 #define TL_TXGOODFRAMES 0x30
319 #define TL_TXUNDERRUN 0x33
320 #define TL_RXGOODFRAMES 0x34
321 #define TL_RXOVERRUN 0x37
322 #define TL_DEFEREDTX 0x38
323 #define TL_CRCERROR 0x3A
324 #define TL_CODEERROR 0x3B
325 #define TL_MULTICOLTX 0x3C
326 #define TL_SINGLECOLTX 0x3E
327 #define TL_EXCESSIVECOL 0x40
328 #define TL_LATECOL 0x41
329 #define TL_CARRIERLOSS 0x42
330 #define TL_ACOMMIT 0x43
331 #define TL_LDREG 0x44
332 #define TL_BSIZEREG 0x45
333 #define TL_MAXRX 0x46
336 * ThunderLAN SIO register bits
338 #define TL_SIO_MINTEN 0x80
339 #define TL_SIO_ECLOK 0x40
340 #define TL_SIO_ETXEN 0x20
341 #define TL_SIO_EDATA 0x10
342 #define TL_SIO_NMRST 0x08
343 #define TL_SIO_MCLK 0x04
344 #define TL_SIO_MTXEN 0x02
345 #define TL_SIO_MDATA 0x01
348 * Thunderlan NETCONFIG bits
350 #define TL_CFG_RCLKTEST 0x8000
351 #define TL_CFG_TCLKTEST 0x4000
352 #define TL_CFG_BITRATE 0x2000
353 #define TL_CFG_RXCRC 0x1000
354 #define TL_CFG_PEF 0x0800
355 #define TL_CFG_ONEFRAG 0x0400
356 #define TL_CFG_ONECHAN 0x0200
357 #define TL_CFG_MTEST 0x0100
358 #define TL_CFG_PHYEN 0x0080
359 #define TL_CFG_MACSEL6 0x0040
360 #define TL_CFG_MACSEL5 0x0020
361 #define TL_CFG_MACSEL4 0x0010
362 #define TL_CFG_MACSEL3 0x0008
363 #define TL_CFG_MACSEL2 0x0004
364 #define TL_CFG_MACSEL1 0x0002
365 #define TL_CFG_MACSEL0 0x0001
368 * ThunderLAN NETSTS bits
370 #define TL_STS_MIRQ 0x80
371 #define TL_STS_HBEAT 0x40
372 #define TL_STS_TXSTOP 0x20
373 #define TL_STS_RXSTOP 0x10
376 * ThunderLAN NETCMD bits
378 #define TL_CMD_NRESET 0x80
379 #define TL_CMD_NWRAP 0x40
380 #define TL_CMD_CSF 0x20
381 #define TL_CMD_CAF 0x10
382 #define TL_CMD_NOBRX 0x08
383 #define TL_CMD_DUPLEX 0x04
384 #define TL_CMD_TRFRAM 0x02
385 #define TL_CMD_TXPACE 0x01
388 * ThunderLAN NETMASK bits
390 #define TL_MASK_MASK7 0x80
391 #define TL_MASK_MASK6 0x40
392 #define TL_MASK_MASK5 0x20
393 #define TL_MASK_MASK4 0x10
398 #ifdef ANSI_DOESNT_ALLOW_BITFIELDS
399 struct tl_mii_frame {
400 u_int16_t mii_stdelim:2,
408 struct tl_mii_frame {
409 u_int8_t mii_stdelim;
411 u_int8_t mii_phyaddr;
412 u_int8_t mii_regaddr;
413 u_int8_t mii_turnaround;
420 #define TL_MII_STARTDELIM 0x01
421 #define TL_MII_READOP 0x02
422 #define TL_MII_WRITEOP 0x01
423 #define TL_MII_TURNAROUND 0x02
425 #define TL_LAST_FRAG 0x80000000
426 #define TL_CSTAT_UNUSED 0x8000
427 #define TL_CSTAT_FRAMECMP 0x4000
428 #define TL_CSTAT_READY 0x3000
429 #define TL_CSTAT_UNUSED13 0x2000
430 #define TL_CSTAT_UNUSED12 0x1000
431 #define TL_CSTAT_EOC 0x0800
432 #define TL_CSTAT_RXERROR 0x0400
433 #define TL_CSTAT_PASSCRC 0x0200
434 #define TL_CSTAT_DPRIO 0x0100
436 #define TL_FRAME_MASK 0x00FFFFFF
437 #define tl_tx_goodframes(x) (x.tl_txstat & TL_FRAME_MASK)
438 #define tl_tx_underrun(x) ((x.tl_txstat & ~TL_FRAME_MASK) >> 24)
439 #define tl_rx_goodframes(x) (x.tl_rxstat & TL_FRAME_MASK)
440 #define tl_rx_overrun(x) ((x.tl_rxstat & ~TL_FRAME_MASK) >> 24)
445 u_int16_t tl_deferred;
446 u_int8_t tl_crc_errors;
447 u_int8_t tl_code_errors;
448 u_int16_t tl_tx_multi_collision;
449 u_int16_t tl_tx_single_collision;
450 u_int8_t tl_excessive_collision;
451 u_int8_t tl_late_collision;
452 u_int8_t tl_carrier_loss;
457 * ACOMMIT register bits. These are used only when a bitrate
458 * PHY is selected ('bitrate' bit in netconfig register is set).
460 #define TL_AC_MTXER 0x01 /* reserved */
461 #define TL_AC_MTXD1 0x02 /* 0 == 10baseT 1 == AUI */
462 #define TL_AC_MTXD2 0x04 /* loopback disable */
463 #define TL_AC_MTXD3 0x08 /* full duplex disable */
465 #define TL_AC_TXTHRESH 0xF0
466 #define TL_AC_TXTHRESH_16LONG 0x00
467 #define TL_AC_TXTHRESH_32LONG 0x10
468 #define TL_AC_TXTHRESH_64LONG 0x20
469 #define TL_AC_TXTHRESH_128LONG 0x30
470 #define TL_AC_TXTHRESH_256LONG 0x40
471 #define TL_AC_TXTHRESH_WHOLEPKT 0x50
474 * PCI burst size register (TL_BSIZEREG).
476 #define TL_RXBURST 0x0F
477 #define TL_TXBURST 0xF0
479 #define TL_RXBURST_4LONG 0x00
480 #define TL_RXBURST_8LONG 0x01
481 #define TL_RXBURST_16LONG 0x02
482 #define TL_RXBURST_32LONG 0x03
483 #define TL_RXBURST_64LONG 0x04
484 #define TL_RXBURST_128LONG 0x05
486 #define TL_TXBURST_4LONG 0x00
487 #define TL_TXBURST_8LONG 0x10
488 #define TL_TXBURST_16LONG 0x20
489 #define TL_TXBURST_32LONG 0x30
490 #define TL_TXBURST_64LONG 0x40
491 #define TL_TXBURST_128LONG 0x50
494 * register space access macros
496 #define CSR_WRITE_4(sc, reg, val) \
497 bus_space_write_4(sc->tl_btag, sc->tl_bhandle, reg, val)
498 #define CSR_WRITE_2(sc, reg, val) \
499 bus_space_write_2(sc->tl_btag, sc->tl_bhandle, reg, val)
500 #define CSR_WRITE_1(sc, reg, val) \
501 bus_space_write_1(sc->tl_btag, sc->tl_bhandle, reg, val)
503 #define CSR_READ_4(sc, reg) \
504 bus_space_read_4(sc->tl_btag, sc->tl_bhandle, reg)
505 #define CSR_READ_2(sc, reg) \
506 bus_space_read_2(sc->tl_btag, sc->tl_bhandle, reg)
507 #define CSR_READ_1(sc, reg) \
508 bus_space_read_1(sc->tl_btag, sc->tl_bhandle, reg)
510 #define CMD_PUT(sc, x) CSR_WRITE_4(sc, TL_HOSTCMD, x)
511 #define CMD_SET(sc, x) \
512 CSR_WRITE_4(sc, TL_HOSTCMD, CSR_READ_4(sc, TL_HOSTCMD) | (x))
513 #define CMD_CLR(sc, x) \
514 CSR_WRITE_4(sc, TL_HOSTCMD, CSR_READ_4(sc, TL_HOSTCMD) & ~(x))
517 * ThunderLAN adapters typically have a serial EEPROM containing
518 * configuration information. The main reason we're interested in
519 * it is because it also contains the adapters's station address.
521 * Access to the EEPROM is a bit goofy since it is a serial device:
522 * you have to do reads and writes one bit at a time. The state of
523 * the DATA bit can only change while the CLOCK line is held low.
524 * Transactions work basically like this:
526 * 1) Send the EEPROM_START sequence to prepare the EEPROM for
527 * accepting commands. This pulls the clock high, sets
528 * the data bit to 0, enables transmission to the EEPROM,
529 * pulls the data bit up to 1, then pulls the clock low.
530 * The idea is to do a 0 to 1 transition of the data bit
531 * while the clock pin is held high.
533 * 2) To write a bit to the EEPROM, set the TXENABLE bit, then
534 * set the EDATA bit to send a 1 or clear it to send a 0.
535 * Finally, set and then clear ECLOK. Strobing the clock
536 * transmits the bit. After 8 bits have been written, the
537 * EEPROM should respond with an ACK, which should be read.
539 * 3) To read a bit from the EEPROM, clear the TXENABLE bit,
540 * then set ECLOK. The bit can then be read by reading EDATA.
541 * ECLOCK should then be cleared again. This can be repeated
542 * 8 times to read a whole byte, after which the
544 * 4) We need to send the address byte to the EEPROM. For this
545 * we have to send the write control byte to the EEPROM to
546 * tell it to accept data. The byte is 0xA0. The EEPROM should
547 * ack this. The address byte can be send after that.
549 * 5) Now we have to tell the EEPROM to send us data. For that we
550 * have to transmit the read control byte, which is 0xA1. This
551 * byte should also be acked. We can then read the data bits
554 * 6) When we're all finished, send the EEPROM_STOP sequence.
556 * Note that we use the ThunderLAN's NetSio register to access the
557 * EEPROM, however there is an alternate method. There is a PCI NVRAM
558 * register at PCI offset 0xB4 which can also be used with minor changes.
559 * The difference is that access to PCI registers via pci_conf_read()
560 * and pci_conf_write() is done using programmed I/O, which we want to
565 * Note that EEPROM_START leaves transmission enabled.
567 #define EEPROM_START \
568 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock pin high */\
569 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Set DATA bit to 1 */ \
570 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Enable xmit to write bit */\
571 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Pull DATA bit to 0 again */\
572 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock low again */
575 * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so
576 * that no further data can be written to the EEPROM I/O pin.
578 #define EEPROM_STOP \
579 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Disable xmit */ \
580 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Pull DATA to 0 */ \
581 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock high */ \
582 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Enable xmit */ \
583 tl_dio_setbit(sc, TL_NETSIO, TL_SIO_EDATA); /* Toggle DATA to 1 */ \
584 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ETXEN); /* Disable xmit. */ \
585 tl_dio_clrbit(sc, TL_NETSIO, TL_SIO_ECLOK); /* Pull clock low again */
589 * Microchip Technology 24Cxx EEPROM control bytes
591 #define EEPROM_CTL_READ 0xA1 /* 0101 0001 */
592 #define EEPROM_CTL_WRITE 0xA0 /* 0101 0000 */