2 * Copyright (c) 2001 by Thomas Moestl <tmm@FreeBSD.org>.
3 * Copyright (c) 2005 by Marius Strobl <marius@FreeBSD.org>.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
22 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
24 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
31 * Some Open Firmware helper functions that are likely machine dependent.
34 #include <sys/param.h>
36 #include <sys/systm.h>
38 #include <net/ethernet.h>
40 #include <dev/ofw/ofw_bus.h>
41 #include <dev/ofw/ofw_pci.h>
42 #include <dev/ofw/openfirm.h>
44 #include <machine/bus.h>
45 #include <machine/idprom.h>
46 #include <machine/ofw_bus.h>
47 #include <machine/ofw_machdep.h>
50 OF_getetheraddr(device_t dev, u_char *addr)
52 char buf[sizeof("true")];
56 if ((node = OF_finddevice("/options")) > 0 &&
57 OF_getprop(node, "local-mac-address?", buf, sizeof(buf)) > 0) {
58 buf[sizeof(buf) - 1] = '\0';
59 if (strcmp(buf, "true") == 0 &&
60 (node = ofw_bus_get_node(dev)) > 0 &&
61 OF_getprop(node, "local-mac-address", addr,
62 ETHER_ADDR_LEN) == ETHER_ADDR_LEN)
67 if (node <= 0 || OF_getprop(node, "idprom", &idp, sizeof(idp)) == -1)
68 panic("Could not determine the machine ethernet address");
69 bcopy(&idp.id_ether, addr, ETHER_ADDR_LEN);
72 static __inline uint32_t
73 phys_hi_mask_space(const char *bus, uint32_t phys_hi)
78 if (strcmp(bus, "ebus") == 0 || strcmp(bus, "isa") == 0)
80 else if (strcmp(bus, "pci") == 0)
81 space &= OFW_PCI_PHYS_HI_SPACEMASK;
82 /* The phys.hi cells of the other busses only contain space bits. */
87 * Return the physical address and the bus space to use for a node
88 * referenced by its package handle and the index of the register bank
89 * to decode. Intended to be used to together with sparc64_fake_bustag()
90 * by console drivers in early boot only.
91 * Works by mapping the address of the node's bank given in the address
92 * space of its parent upward in the device tree at each bridge along the
94 * Currently only really deals with max. 64-bit addresses, i.e. addresses
95 * consisting of max. 2 phys cells (phys.hi and phys.lo). If we encounter
96 * a 3 phys cells address (as with PCI addresses) we assume phys.hi can
97 * be ignored except for the space bits (generally contained in phys.hi)
98 * and treat phys.mid as phys.hi.
101 OF_decode_addr(phandle_t node, int bank, int *space, bus_addr_t *addr)
104 uint64_t cend, cstart, end, phys, sz, start;
105 pcell_t addrc, szc, paddrc;
106 phandle_t bus, lbus, pbus;
107 uint32_t banks[10 * 5]; /* 10 PCI banks */
108 uint32_t cspace, spc;
112 * In general the addresses are contained in the "reg" property
113 * of a node. The first address in the "reg" property of a PCI
114 * node however is the address of its configuration registers in
115 * the configuration space of the host bridge. Additional entries
116 * denote the memory and I/O addresses. For relocatable addresses
117 * the "reg" property contains the BAR, for non-relocatable
118 * addresses it contains the absolute PCI address. The PCI-only
119 * "assigned-addresses" property however always contains the
120 * absolute PCI addresses.
121 * The "assigned-addresses" and "reg" properties are arrays of
122 * address structures consisting of #address-cells 32-bit phys
123 * cells and #size-cells 32-bit size cells. If a parent lacks
124 * the "#address-cells" or "#size-cells" property the default
125 * for #address-cells to use is 2 and for #size-cells 1.
127 bus = OF_parent(node);
130 if (OF_getprop(bus, "name", name, sizeof(name)) == -1)
132 name[sizeof(name) - 1] = '\0';
133 if (OF_getprop(bus, "#address-cells", &addrc, sizeof(addrc)) == -1)
135 if (OF_getprop(bus, "#size-cells", &szc, sizeof(szc)) == -1)
137 if (addrc < 2 || addrc > 3 || szc < 1 || szc > 2)
139 if (strcmp(name, "pci") == 0) {
142 nbank = OF_getprop(node, "assigned-addresses", &banks,
147 nbank = OF_getprop(node, "reg", &banks, sizeof(banks));
151 nbank /= sizeof(banks[0]) * (addrc + szc);
152 if (bank < 0 || bank > nbank - 1)
155 for (i = 0; i < MIN(2, addrc); i++)
156 phys |= (uint64_t)banks[(addrc + szc) * bank + addrc - 2 + i] <<
157 32 * (MIN(2, addrc) - i - 1);
159 for (i = 0; i < szc; i++)
160 sz |= (uint64_t)banks[(addrc + szc) * bank + addrc + i] <<
164 spc = phys_hi_mask_space(name, banks[(addrc + szc) * bank]);
167 * Map upward in the device tree at every bridge we encounter
168 * using their "ranges" properties.
169 * The "ranges" property of a bridge is an array of a structure
170 * consisting of that bridge's #address-cells 32-bit child-phys
171 * cells, its parent bridge #address-cells 32-bit parent-phys
172 * cells and that bridge's #size-cells 32-bit size cells.
173 * If a bridge doesn't have a "ranges" property no mapping is
174 * necessary at that bridge.
178 while ((pbus = OF_parent(bus)) != 0) {
179 if (OF_getprop(pbus, "#address-cells", &paddrc,
180 sizeof(paddrc)) == -1)
182 if (paddrc < 2 || paddrc > 3)
184 nbank = OF_getprop(bus, "ranges", &banks, sizeof(banks));
186 if (OF_getprop(pbus, "name", name, sizeof(name)) == -1)
188 name[sizeof(name) - 1] = '\0';
192 if (OF_getprop(bus, "#size-cells", &szc,
195 if (szc < 1 || szc > 2)
198 nbank /= sizeof(banks[0]) * (addrc + paddrc + szc);
199 for (i = 0; i < nbank; i++) {
200 cspace = phys_hi_mask_space(name,
201 banks[(addrc + paddrc + szc) * i]);
205 for (j = 0; j < MIN(2, addrc); j++)
206 phys |= (uint64_t)banks[
207 (addrc + paddrc + szc) * i +
209 32 * (MIN(2, addrc) - j - 1);
211 for (j = 0; j < szc; j++)
212 sz |= (uint64_t)banks[
213 (addrc + paddrc + szc) * i + addrc +
217 cend = phys + sz - 1;
218 if (start < cstart || start > cend)
220 if (end < cstart || end > cend)
223 for (j = 0; j < MIN(2, paddrc); j++)
224 phys |= (uint64_t)banks[
225 (addrc + paddrc + szc) * i + addrc +
227 32 * (MIN(2, paddrc) - j - 1);
228 start += phys - cstart;
229 end += phys - cstart;
230 if (OF_getprop(pbus, "name", name, sizeof(name)) == -1)
232 name[sizeof(name) - 1] = '\0';
233 spc = phys_hi_mask_space(name,
234 banks[(addrc + paddrc + szc) * i + addrc]);
245 /* Done with mapping. Return the bus space as used by FreeBSD. */
247 if (OF_getprop(lbus, "name", name, sizeof(name)) == -1)
249 name[sizeof(name) - 1] = '\0';
250 if (strcmp(name, "central") == 0) {
251 *space = UPA_BUS_SPACE;
253 } else if (strcmp(name, "pci") == 0) {
255 case OFW_PCI_PHYS_HI_SPACE_IO:
256 *space = PCI_IO_BUS_SPACE;
258 case OFW_PCI_PHYS_HI_SPACE_MEM32:
259 *space = PCI_MEMORY_BUS_SPACE;
262 } else if (strcmp(name, "sbus") == 0) {
263 *space = SBUS_BUS_SPACE;