2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2001 by Thomas Moestl <tmm@FreeBSD.org>.
5 * Copyright (c) 2005 - 2010 by Marius Strobl <marius@FreeBSD.org>.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
21 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
22 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
23 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
24 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
25 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
26 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
33 * Some Open Firmware helper functions that are likely machine dependent.
36 #include <sys/param.h>
38 #include <sys/systm.h>
40 #include <net/ethernet.h>
42 #include <dev/ofw/ofw_bus.h>
43 #include <dev/ofw/ofw_pci.h>
44 #include <dev/ofw/openfirm.h>
46 #include <machine/bus.h>
47 #include <machine/idprom.h>
48 #include <machine/ofw_machdep.h>
49 #include <machine/stdarg.h>
52 OF_getetheraddr(device_t dev, u_char *addr)
54 char buf[sizeof("true")];
58 if ((node = OF_finddevice("/options")) != -1 &&
59 OF_getprop(node, "local-mac-address?", buf, sizeof(buf)) > 0) {
60 buf[sizeof(buf) - 1] = '\0';
61 if (strcmp(buf, "true") == 0 &&
62 (node = ofw_bus_get_node(dev)) > 0 &&
63 OF_getprop(node, "local-mac-address", addr,
64 ETHER_ADDR_LEN) == ETHER_ADDR_LEN)
69 if (node <= 0 || OF_getprop(node, "idprom", &idp, sizeof(idp)) == -1)
70 panic("Could not determine the machine Ethernet address");
71 bcopy(&idp.id_ether, addr, ETHER_ADDR_LEN);
75 OF_getscsinitid(device_t dev)
80 for (node = ofw_bus_get_node(dev); node != 0; node = OF_parent(node))
81 if (OF_getprop(node, "scsi-initiator-id", &id,
88 OF_panic(const char *fmt, ...)
94 (void)vsnprintf(buf, sizeof(buf), fmt, ap);
95 OF_printf("OF_panic: %s\n", buf);
100 static __inline uint32_t
101 phys_hi_mask_space(const char *bus, uint32_t phys_hi)
104 if (strcmp(bus, "ebus") == 0 || strcmp(bus, "isa") == 0)
106 else if (strcmp(bus, "pci") == 0)
107 phys_hi &= OFW_PCI_PHYS_HI_SPACEMASK;
108 /* The phys.hi cells of the other busses only contain space bits. */
113 * Return the physical address and the bus space to use for a node
114 * referenced by its package handle and the index of the register bank
115 * to decode. Intended to be used to together with sparc64_fake_bustag()
116 * by console drivers in early boot only.
117 * Works by mapping the address of the node's bank given in the address
118 * space of its parent upward in the device tree at each bridge along the
120 * Currently only really deals with max. 64-bit addresses, i.e. addresses
121 * consisting of max. 2 phys cells (phys.hi and phys.lo). If we encounter
122 * a 3 phys cells address (as with PCI addresses) we assume phys.hi can
123 * be ignored except for the space bits (generally contained in phys.hi)
124 * and treat phys.mid as phys.hi.
127 OF_decode_addr(phandle_t node, int bank, int *space, bus_addr_t *addr)
130 uint64_t cend, cstart, end, phys, pphys, sz, start;
131 pcell_t addrc, szc, paddrc;
132 phandle_t bus, lbus, pbus;
133 uint32_t banks[10 * 5]; /* 10 PCI banks */
134 uint32_t cspc, pspc, spc;
138 * In general the addresses are contained in the "reg" property
139 * of a node. The first address in the "reg" property of a PCI
140 * node however is the address of its configuration registers in
141 * the configuration space of the host bridge. Additional entries
142 * denote the memory and I/O addresses. For relocatable addresses
143 * the "reg" property contains the BAR, for non-relocatable
144 * addresses it contains the absolute PCI address. The PCI-only
145 * "assigned-addresses" property however always contains the
146 * absolute PCI addresses.
147 * The "assigned-addresses" and "reg" properties are arrays of
148 * address structures consisting of #address-cells 32-bit phys
149 * cells and #size-cells 32-bit size cells. If a parent lacks
150 * the "#address-cells" or "#size-cells" property the default
151 * for #address-cells to use is 2 and for #size-cells 1.
153 bus = OF_parent(node);
156 if (OF_getprop(bus, "name", name, sizeof(name)) == -1)
158 name[sizeof(name) - 1] = '\0';
159 if (OF_getprop(bus, "#address-cells", &addrc, sizeof(addrc)) == -1)
161 if (OF_getprop(bus, "#size-cells", &szc, sizeof(szc)) == -1)
163 if (addrc < 2 || addrc > 3 || szc < 1 || szc > 2)
165 if (strcmp(name, "pci") == 0) {
168 nbank = OF_getprop(node, "assigned-addresses", &banks,
173 nbank = OF_getprop(node, "reg", &banks, sizeof(banks));
177 nbank /= sizeof(banks[0]) * (addrc + szc);
178 if (bank < 0 || bank > nbank - 1)
181 spc = phys_hi_mask_space(name, banks[bank]);
182 /* Skip the high cell for 3-cell addresses. */
185 for (i = 0; i < MIN(2, addrc); i++)
186 phys = ((uint64_t)phys << 32) | banks[bank++];
188 for (i = 0; i < szc; i++)
189 sz = ((uint64_t)sz << 32) | banks[bank++];
194 * Map upward in the device tree at every bridge we encounter
195 * using their "ranges" properties.
196 * The "ranges" property of a bridge is an array of a structure
197 * consisting of that bridge's #address-cells 32-bit child-phys
198 * cells, its parent bridge #address-cells 32-bit parent-phys
199 * cells and that bridge's #size-cells 32-bit size cells.
200 * If a bridge doesn't have a "ranges" property no mapping is
201 * necessary at that bridge.
205 while ((pbus = OF_parent(bus)) != 0) {
206 if (OF_getprop(pbus, "#address-cells", &paddrc,
207 sizeof(paddrc)) == -1)
209 if (paddrc < 2 || paddrc > 3)
211 nbank = OF_getprop(bus, "ranges", &banks, sizeof(banks));
213 if (OF_getprop(pbus, "name", name, sizeof(name)) == -1)
215 name[sizeof(name) - 1] = '\0';
218 if (OF_getprop(bus, "#size-cells", &szc, sizeof(szc)) == -1)
220 if (szc < 1 || szc > 2)
222 nbank /= sizeof(banks[0]) * (addrc + paddrc + szc);
224 for (i = 0; i < nbank; i++) {
225 cspc = phys_hi_mask_space(name, banks[bank]);
227 bank += addrc + paddrc + szc;
230 /* Skip the high cell for 3-cell addresses. */
233 for (j = 0; j < MIN(2, addrc); j++)
234 phys = ((uint64_t)phys << 32) | banks[bank++];
236 /* Skip the high cell for 3-cell addresses. */
239 for (j = 0; j < MIN(2, paddrc); j++)
241 ((uint64_t)pphys << 32) | banks[bank++];
243 for (j = 0; j < szc; j++)
244 sz = ((uint64_t)sz << 32) | banks[bank++];
246 cend = phys + sz - 1;
247 if (start < cstart || start > cend)
249 if (end < cstart || end > cend)
251 if (OF_getprop(pbus, "name", name, sizeof(name)) == -1)
253 name[sizeof(name) - 1] = '\0';
254 spc = phys_hi_mask_space(name, pspc);
255 start += pphys - cstart;
256 end += pphys - cstart;
268 /* Determine the bus space based on the last bus we mapped. */
269 if (OF_parent(lbus) == 0) {
270 *space = NEXUS_BUS_SPACE;
273 if (OF_getprop(lbus, "name", name, sizeof(name)) == -1)
275 name[sizeof(name) - 1] = '\0';
276 if (strcmp(name, "central") == 0 || strcmp(name, "ebus") == 0 ||
277 strcmp(name, "upa") == 0) {
278 *space = NEXUS_BUS_SPACE;
280 } else if (strcmp(name, "pci") == 0) {
282 case OFW_PCI_PHYS_HI_SPACE_IO:
283 *space = PCI_IO_BUS_SPACE;
285 case OFW_PCI_PHYS_HI_SPACE_MEM32:
286 *space = PCI_MEMORY_BUS_SPACE;
289 } else if (strcmp(name, "sbus") == 0) {
290 *space = SBUS_BUS_SPACE;