2 * Copyright (c) 1982, 1986, 1993
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by the University of
16 * California, Berkeley and its contributors.
17 * 4. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * @(#)mtio.h 8.1 (Berkeley) 6/2/93
41 #include <sys/types.h>
43 #include <sys/ioccom.h>
46 * Structures and definitions for mag tape io control commands
49 /* structure for MTIOCTOP - mag tape op command */
51 short mt_op; /* operations defined below */
52 daddr_t mt_count; /* how many of them */
56 #define MTWEOF 0 /* write an end-of-file record */
57 #define MTFSF 1 /* forward space file */
58 #define MTBSF 2 /* backward space file */
59 #define MTFSR 3 /* forward space record */
60 #define MTBSR 4 /* backward space record */
61 #define MTREW 5 /* rewind */
62 #define MTOFFL 6 /* rewind and put the drive offline */
63 #define MTNOP 7 /* no operation, sets status only */
64 #define MTCACHE 8 /* enable controller cache */
65 #define MTNOCACHE 9 /* disable controller cache */
67 #if defined(__FreeBSD__)
68 /* Set block size for device. If device is a variable size dev */
69 /* a non zero parameter will change the device to a fixed block size */
70 /* device with block size set to that of the parameter passed in. */
71 /* Resetting the block size to 0 will restore the device to a variable */
72 /* block size device. */
76 /* Set density values for device. Sets the value for the opened mode only. */
80 #define MTERASE 12 /* erase to EOM */
81 #define MTEOD 13 /* Space to EOM */
82 #define MTCOMP 14 /* select compression mode 0=off, 1=def */
83 #define MTRETENS 15 /* re-tension tape */
84 #define MTWSS 16 /* write setmark(s) */
85 #define MTFSS 17 /* forward space setmark */
86 #define MTBSS 18 /* backward space setmark */
88 #define MT_COMP_ENABLE 0xffffffff
89 #define MT_COMP_DISABLED 0xfffffffe
90 #define MT_COMP_UNSUPP 0xfffffffd
93 * Values in mt_dsreg that say what the device is doing
95 #define MTIO_DSREG_NIL 0 /* Unknown */
96 #define MTIO_DSREG_REST 1 /* Doing Nothing */
97 #define MTIO_DSREG_RBSY 2 /* Communicating with tape (but no motion) */
98 #define MTIO_DSREG_WR 20 /* Writing */
99 #define MTIO_DSREG_FMK 21 /* Writing Filemarks */
100 #define MTIO_DSREG_ZER 22 /* Erasing */
101 #define MTIO_DSREG_RD 30 /* Reading */
102 #define MTIO_DSREG_FWD 40 /* Spacing Forward */
103 #define MTIO_DSREG_REV 41 /* Spacing Reverse */
104 #define MTIO_DSREG_POS 42 /* Hardware Positioning (direction unknown) */
105 #define MTIO_DSREG_REW 43 /* Rewinding */
106 #define MTIO_DSREG_TEN 44 /* Retensioning */
107 #define MTIO_DSREG_UNL 45 /* Unloading */
108 #define MTIO_DSREG_LD 46 /* Loading */
110 #endif /* __FreeBSD__ */
112 /* structure for MTIOCGET - mag tape get status command */
115 short mt_type; /* type of magtape device */
116 /* the following two registers are grossly device dependent */
117 short mt_dsreg; /* ``drive status'' register */
118 short mt_erreg; /* ``error'' register */
119 /* end device-dependent registers */
121 * Note that the residual count, while maintained, may be
122 * be nonsense because the size of the residual may (greatly)
123 * exceed 32 K-bytes. Use the MTIOCERRSTAT ioctl to get a
124 * more accurate count.
126 short mt_resid; /* residual count */
127 #if defined (__FreeBSD__)
128 daddr_t mt_blksiz; /* presently operating blocksize */
129 daddr_t mt_density; /* presently operating density */
130 u_int32_t mt_comp; /* presently operating compression */
131 daddr_t mt_blksiz0; /* blocksize for mode 0 */
132 daddr_t mt_blksiz1; /* blocksize for mode 1 */
133 daddr_t mt_blksiz2; /* blocksize for mode 2 */
134 daddr_t mt_blksiz3; /* blocksize for mode 3 */
135 daddr_t mt_density0; /* density for mode 0 */
136 daddr_t mt_density1; /* density for mode 1 */
137 daddr_t mt_density2; /* density for mode 2 */
138 daddr_t mt_density3; /* density for mode 3 */
139 /* the following are not yet implemented */
140 u_int32_t mt_comp0; /* compression type for mode 0 */
141 u_int32_t mt_comp1; /* compression type for mode 1 */
142 u_int32_t mt_comp2; /* compression type for mode 2 */
143 u_int32_t mt_comp3; /* compression type for mode 3 */
144 /* end not yet implemented */
146 daddr_t mt_fileno; /* relative file number of current position */
147 daddr_t mt_blkno; /* relative block number of current position */
150 /* structure for MTIOCERRSTAT - tape get error status command */
151 /* really only supported for SCSI tapes right now */
152 struct scsi_tape_errors {
154 * These are latched from the last command that had a SCSI
155 * Check Condition noted for these operations. The act
156 * of issuing an MTIOCERRSTAT unlatches and clears them.
158 u_int8_t io_sense[32]; /* Last Sense Data For Data I/O */
159 int32_t io_resid; /* residual count from last Data I/O */
160 u_int8_t io_cdb[16]; /* Command that Caused the Last Data Sense */
161 u_int8_t ctl_sense[32]; /* Last Sense Data For Control I/O */
162 int32_t ctl_resid; /* residual count from last Control I/O */
163 u_int8_t ctl_cdb[16]; /* Command that Caused the Last Control Sense */
165 * These are the read and write cumulative error counters.
166 * (how to reset cumulative error counters is not yet defined).
167 * (not implemented as yet but space is being reserved for them)
170 u_int32_t retries; /* total # retries performed */
171 u_int32_t corrected; /* total # corrections performed */
172 u_int32_t processed; /* total # corrections successful */
173 u_int32_t failures; /* total # corrections/retries failed */
174 u_int64_t nbytes; /* total # bytes processed */
179 struct scsi_tape_errors scsi_errstat;
180 char _reserved_padding[256];
184 * Constants for mt_type byte. These are the same
185 * for controllers compatible with the types listed.
187 #define MT_ISTS 0x01 /* TS-11 */
188 #define MT_ISHT 0x02 /* TM03 Massbus: TE16, TU45, TU77 */
189 #define MT_ISTM 0x03 /* TM11/TE10 Unibus */
190 #define MT_ISMT 0x04 /* TM78/TU78 Massbus */
191 #define MT_ISUT 0x05 /* SI TU-45 emulation on Unibus */
192 #define MT_ISCPC 0x06 /* SUN */
193 #define MT_ISAR 0x07 /* SUN */
194 #define MT_ISTMSCP 0x08 /* DEC TMSCP protocol (TU81, TK50) */
195 #define MT_ISCY 0x09 /* CCI Cipher */
196 #define MT_ISCT 0x0a /* HP 1/4 tape */
197 #define MT_ISFHP 0x0b /* HP 7980 1/2 tape */
198 #define MT_ISEXABYTE 0x0c /* Exabyte */
199 #define MT_ISEXA8200 0x0c /* Exabyte EXB-8200 */
200 #define MT_ISEXA8500 0x0d /* Exabyte EXB-8500 */
201 #define MT_ISVIPER1 0x0e /* Archive Viper-150 */
202 #define MT_ISPYTHON 0x0f /* Archive Python (DAT) */
203 #define MT_ISHPDAT 0x10 /* HP 35450A DAT drive */
204 #define MT_ISMFOUR 0x11 /* M4 Data 1/2 9track drive */
205 #define MT_ISTK50 0x12 /* DEC SCSI TK50 */
206 #define MT_ISMT02 0x13 /* Emulex MT02 SCSI tape controller */
208 /* mag tape io control commands */
209 #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
210 #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
211 /* these two do not appear to be used anywhere */
212 #define MTIOCIEOT _IO('m', 3) /* ignore EOT error */
213 #define MTIOCEEOT _IO('m', 4) /* enable EOT error */
215 * When more SCSI-3 SSC (streaming device) devices are out there
216 * that support the full 32 byte type 2 structure, we'll have to
217 * rethink these ioctls to support all the entities they haul into
218 * the picture (64 bit blocks, logical file record numbers, etc..).
220 #define MTIOCRDSPOS _IOR('m', 5, u_int32_t) /* get logical blk addr */
221 #define MTIOCRDHPOS _IOR('m', 6, u_int32_t) /* get hardware blk addr */
222 #define MTIOCSLOCATE _IOW('m', 5, u_int32_t) /* seek to logical blk addr */
223 #define MTIOCHLOCATE _IOW('m', 6, u_int32_t) /* seek to hardware blk addr */
224 #define MTIOCERRSTAT _IOR('m', 7, union mterrstat) /* get tape errors */
226 * Set EOT model- argument is number of filemarks to end a tape with.
227 * Note that not all possible values will be accepted.
229 #define MTIOCSETEOTMODEL _IOW('m', 8, u_int32_t)
230 /* Get current EOT model */
231 #define MTIOCGETEOTMODEL _IOR('m', 8, u_int32_t)
234 #define DEFTAPE "/dev/nsa0"
239 * minor device number
242 #define T_UNIT 003 /* unit selection */
243 #define T_NOREWIND 004 /* no rewind on close */
244 #define T_DENSEL 030 /* density select */
245 #define T_800BPI 000 /* select 800 bpi */
246 #define T_1600BPI 010 /* select 1600 bpi */
247 #define T_6250BPI 020 /* select 6250 bpi */
248 #define T_BADBPI 030 /* undefined selection */
251 #endif /* !_SYS_MTIO_H_ */