]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/param.h
Avoid dynamic syscall overhead for statically compiled modules.
[FreeBSD/FreeBSD.git] / sys / sys / param.h
1 /*-
2  * Copyright (c) 1982, 1986, 1989, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)param.h     8.3 (Berkeley) 4/4/95
35  * $FreeBSD$
36  */
37
38 #ifndef _SYS_PARAM_H_
39 #define _SYS_PARAM_H_
40
41 #include <sys/_null.h>
42
43 #define BSD     199506          /* System version (year & month). */
44 #define BSD4_3  1
45 #define BSD4_4  1
46
47 /* 
48  * __FreeBSD_version numbers are documented in the Porter's Handbook.
49  * If you bump the version for any reason, you should update the documentation
50  * there.
51  * Currently this lives here in the doc/ repository:
52  *
53  *      head/en_US.ISO8859-1/books/porters-handbook/book.xml
54  *
55  * scheme is:  <major><two digit minor>Rxx
56  *              'R' is in the range 0 to 4 if this is a release branch or
57  *              x.0-CURRENT before RELENG_*_0 is created, otherwise 'R' is
58  *              in the range 5 to 9.
59  */
60 #undef __FreeBSD_version
61 #define __FreeBSD_version 1100040       /* Master, propagated to newvers */
62
63 /*
64  * __FreeBSD_kernel__ indicates that this system uses the kernel of FreeBSD,
65  * which by definition is always true on FreeBSD. This macro is also defined
66  * on other systems that use the kernel of FreeBSD, such as GNU/kFreeBSD.
67  *
68  * It is tempting to use this macro in userland code when we want to enable
69  * kernel-specific routines, and in fact it's fine to do this in code that
70  * is part of FreeBSD itself.  However, be aware that as presence of this
71  * macro is still not widespread (e.g. older FreeBSD versions, 3rd party
72  * compilers, etc), it is STRONGLY DISCOURAGED to check for this macro in
73  * external applications without also checking for __FreeBSD__ as an
74  * alternative.
75  */
76 #undef __FreeBSD_kernel__
77 #define __FreeBSD_kernel__
78
79 #ifdef _KERNEL
80 #define P_OSREL_SIGWAIT         700000
81 #define P_OSREL_SIGSEGV         700004
82 #define P_OSREL_MAP_ANON        800104
83 #define P_OSREL_MAP_FSTRICT     1100036
84 #define P_OSREL_MAP_RENAME      1100039
85
86 #define P_OSREL_MAJOR(x)        ((x) / 100000)
87 #endif
88
89 #ifndef LOCORE
90 #include <sys/types.h>
91 #endif
92
93 /*
94  * Machine-independent constants (some used in following include files).
95  * Redefined constants are from POSIX 1003.1 limits file.
96  *
97  * MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
98  */
99 #include <sys/syslimits.h>
100
101 #define MAXCOMLEN       19              /* max command name remembered */
102 #define MAXINTERP       PATH_MAX        /* max interpreter file name length */
103 #define MAXLOGNAME      33              /* max login name length (incl. NUL) */
104 #define MAXUPRC         CHILD_MAX       /* max simultaneous processes */
105 #define NCARGS          ARG_MAX         /* max bytes for an exec function */
106 #define NGROUPS         (NGROUPS_MAX+1) /* max number groups */
107 #define NOFILE          OPEN_MAX        /* max open files per process */
108 #define NOGROUP         65535           /* marker for empty group set member */
109 #define MAXHOSTNAMELEN  256             /* max hostname size */
110 #define SPECNAMELEN     63              /* max length of devicename */
111
112 /* More types and definitions used throughout the kernel. */
113 #ifdef _KERNEL
114 #include <sys/cdefs.h>
115 #include <sys/errno.h>
116 #ifndef LOCORE
117 #include <sys/time.h>
118 #include <sys/priority.h>
119 #endif
120
121 #ifndef FALSE
122 #define FALSE   0
123 #endif
124 #ifndef TRUE
125 #define TRUE    1
126 #endif
127 #endif
128
129 #ifndef _KERNEL
130 /* Signals. */
131 #include <sys/signal.h>
132 #endif
133
134 /* Machine type dependent parameters. */
135 #include <machine/param.h>
136 #ifndef _KERNEL
137 #include <sys/limits.h>
138 #endif
139
140 #ifndef DEV_BSHIFT
141 #define DEV_BSHIFT      9               /* log2(DEV_BSIZE) */
142 #endif
143 #define DEV_BSIZE       (1<<DEV_BSHIFT)
144
145 #ifndef BLKDEV_IOSIZE
146 #define BLKDEV_IOSIZE  PAGE_SIZE        /* default block device I/O size */
147 #endif
148 #ifndef DFLTPHYS
149 #define DFLTPHYS        (64 * 1024)     /* default max raw I/O transfer size */
150 #endif
151 #ifndef MAXPHYS
152 #define MAXPHYS         (128 * 1024)    /* max raw I/O transfer size */
153 #endif
154 #ifndef MAXDUMPPGS
155 #define MAXDUMPPGS      (DFLTPHYS/PAGE_SIZE)
156 #endif
157
158 /*
159  * Constants related to network buffer management.
160  * MCLBYTES must be no larger than PAGE_SIZE.
161  */
162 #ifndef MSIZE
163 #define MSIZE           256             /* size of an mbuf */
164 #endif
165
166 #ifndef MCLSHIFT
167 #define MCLSHIFT        11              /* convert bytes to mbuf clusters */
168 #endif  /* MCLSHIFT */
169
170 #define MCLBYTES        (1 << MCLSHIFT) /* size of an mbuf cluster */
171
172 #if PAGE_SIZE < 2048
173 #define MJUMPAGESIZE    MCLBYTES
174 #elif PAGE_SIZE <= 8192
175 #define MJUMPAGESIZE    PAGE_SIZE
176 #else
177 #define MJUMPAGESIZE    (8 * 1024)
178 #endif
179
180 #define MJUM9BYTES      (9 * 1024)      /* jumbo cluster 9k */
181 #define MJUM16BYTES     (16 * 1024)     /* jumbo cluster 16k */
182
183 /*
184  * Some macros for units conversion
185  */
186
187 /* clicks to bytes */
188 #ifndef ctob
189 #define ctob(x) ((x)<<PAGE_SHIFT)
190 #endif
191
192 /* bytes to clicks */
193 #ifndef btoc
194 #define btoc(x) (((vm_offset_t)(x)+PAGE_MASK)>>PAGE_SHIFT)
195 #endif
196
197 /*
198  * btodb() is messy and perhaps slow because `bytes' may be an off_t.  We
199  * want to shift an unsigned type to avoid sign extension and we don't
200  * want to widen `bytes' unnecessarily.  Assume that the result fits in
201  * a daddr_t.
202  */
203 #ifndef btodb
204 #define btodb(bytes)                    /* calculates (bytes / DEV_BSIZE) */ \
205         (sizeof (bytes) > sizeof(long) \
206          ? (daddr_t)((unsigned long long)(bytes) >> DEV_BSHIFT) \
207          : (daddr_t)((unsigned long)(bytes) >> DEV_BSHIFT))
208 #endif
209
210 #ifndef dbtob
211 #define dbtob(db)                       /* calculates (db * DEV_BSIZE) */ \
212         ((off_t)(db) << DEV_BSHIFT)
213 #endif
214
215 #define PRIMASK 0x0ff
216 #define PCATCH  0x100           /* OR'd with pri for tsleep to check signals */
217 #define PDROP   0x200   /* OR'd with pri to stop re-entry of interlock mutex */
218
219 #define NZERO   0               /* default "nice" */
220
221 #define NBBY    8               /* number of bits in a byte */
222 #define NBPW    sizeof(int)     /* number of bytes per word (integer) */
223
224 #define CMASK   022             /* default file mask: S_IWGRP|S_IWOTH */
225
226 #define NODEV   (dev_t)(-1)     /* non-existent device */
227
228 /*
229  * File system parameters and macros.
230  *
231  * MAXBSIZE -   Filesystems are made out of blocks of at most MAXBSIZE bytes
232  *              per block.  MAXBSIZE may be made larger without effecting
233  *              any existing filesystems as long as it does not exceed MAXPHYS,
234  *              and may be made smaller at the risk of not being able to use
235  *              filesystems which require a block size exceeding MAXBSIZE.
236  *
237  * BKVASIZE -   Nominal buffer space per buffer, in bytes.  BKVASIZE is the
238  *              minimum KVM memory reservation the kernel is willing to make.
239  *              Filesystems can of course request smaller chunks.  Actual 
240  *              backing memory uses a chunk size of a page (PAGE_SIZE).
241  *
242  *              If you make BKVASIZE too small you risk seriously fragmenting
243  *              the buffer KVM map which may slow things down a bit.  If you
244  *              make it too big the kernel will not be able to optimally use 
245  *              the KVM memory reserved for the buffer cache and will wind 
246  *              up with too-few buffers.
247  *
248  *              The default is 16384, roughly 2x the block size used by a
249  *              normal UFS filesystem.
250  */
251 #define MAXBSIZE        65536   /* must be power of 2 */
252 #define BKVASIZE        16384   /* must be power of 2 */
253 #define BKVAMASK        (BKVASIZE-1)
254
255 /*
256  * MAXPATHLEN defines the longest permissible path length after expanding
257  * symbolic links. It is used to allocate a temporary buffer from the buffer
258  * pool in which to do the name expansion, hence should be a power of two,
259  * and must be less than or equal to MAXBSIZE.  MAXSYMLINKS defines the
260  * maximum number of symbolic links that may be expanded in a path name.
261  * It should be set high enough to allow all legitimate uses, but halt
262  * infinite loops reasonably quickly.
263  */
264 #define MAXPATHLEN      PATH_MAX
265 #define MAXSYMLINKS     32
266
267 /* Bit map related macros. */
268 #define setbit(a,i)     (((unsigned char *)(a))[(i)/NBBY] |= 1<<((i)%NBBY))
269 #define clrbit(a,i)     (((unsigned char *)(a))[(i)/NBBY] &= ~(1<<((i)%NBBY)))
270 #define isset(a,i)                                                      \
271         (((const unsigned char *)(a))[(i)/NBBY] & (1<<((i)%NBBY)))
272 #define isclr(a,i)                                                      \
273         ((((const unsigned char *)(a))[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
274
275 /* Macros for counting and rounding. */
276 #ifndef howmany
277 #define howmany(x, y)   (((x)+((y)-1))/(y))
278 #endif
279 #define nitems(x)       (sizeof((x)) / sizeof((x)[0]))
280 #define rounddown(x, y) (((x)/(y))*(y))
281 #define rounddown2(x, y) ((x)&(~((y)-1)))          /* if y is power of two */
282 #define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))  /* to any y */
283 #define roundup2(x, y)  (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */
284 #define powerof2(x)     ((((x)-1)&(x))==0)
285
286 /* Macros for min/max. */
287 #define MIN(a,b) (((a)<(b))?(a):(b))
288 #define MAX(a,b) (((a)>(b))?(a):(b))
289
290 #ifdef _KERNEL
291 /*
292  * Basic byte order function prototypes for non-inline functions.
293  */
294 #ifndef LOCORE
295 #ifndef _BYTEORDER_PROTOTYPED
296 #define _BYTEORDER_PROTOTYPED
297 __BEGIN_DECLS
298 __uint32_t       htonl(__uint32_t);
299 __uint16_t       htons(__uint16_t);
300 __uint32_t       ntohl(__uint32_t);
301 __uint16_t       ntohs(__uint16_t);
302 __END_DECLS
303 #endif
304 #endif
305
306 #ifndef lint
307 #ifndef _BYTEORDER_FUNC_DEFINED
308 #define _BYTEORDER_FUNC_DEFINED
309 #define htonl(x)        __htonl(x)
310 #define htons(x)        __htons(x)
311 #define ntohl(x)        __ntohl(x)
312 #define ntohs(x)        __ntohs(x)
313 #endif /* !_BYTEORDER_FUNC_DEFINED */
314 #endif /* lint */
315 #endif /* _KERNEL */
316
317 /*
318  * Scale factor for scaled integers used to count %cpu time and load avgs.
319  *
320  * The number of CPU `tick's that map to a unique `%age' can be expressed
321  * by the formula (1 / (2 ^ (FSHIFT - 11))).  The maximum load average that
322  * can be calculated (assuming 32 bits) can be closely approximated using
323  * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
324  *
325  * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
326  * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
327  */
328 #define FSHIFT  11              /* bits to right of fixed binary point */
329 #define FSCALE  (1<<FSHIFT)
330
331 #define dbtoc(db)                       /* calculates devblks to pages */ \
332         ((db + (ctodb(1) - 1)) >> (PAGE_SHIFT - DEV_BSHIFT))
333  
334 #define ctodb(db)                       /* calculates pages to devblks */ \
335         ((db) << (PAGE_SHIFT - DEV_BSHIFT))
336
337 /*
338  * Old spelling of __containerof().
339  */
340 #define member2struct(s, m, x)                                          \
341         ((struct s *)(void *)((char *)(x) - offsetof(struct s, m)))
342
343 /*
344  * Access a variable length array that has been declared as a fixed
345  * length array.
346  */
347 #define __PAST_END(array, offset) (((__typeof__(*(array)) *)(array))[offset])
348
349 #endif  /* _SYS_PARAM_H_ */