]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/priv.h
THIS BRANCH IS OBSOLETE, PLEASE READ:
[FreeBSD/FreeBSD.git] / sys / sys / priv.h
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2006 nCircle Network Security, Inc.
5  * All rights reserved.
6  *
7  * This software was developed by Robert N. M. Watson for the TrustedBSD
8  * Project under contract to nCircle Network Security, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR, NCIRCLE NETWORK SECURITY,
23  * INC., OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
25  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
26  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
27  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
28  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
29  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30  *
31  * $FreeBSD$
32  */
33
34 /*
35  * Privilege checking interface for BSD kernel.
36  */
37 #ifndef _SYS_PRIV_H_
38 #define _SYS_PRIV_H_
39
40 /*
41  * Privilege list, sorted loosely by kernel subsystem.
42  *
43  * Think carefully before adding or reusing one of these privileges -- are
44  * there existing instances referring to the same privilege?  Third party
45  * vendors may request the assignment of privileges to be used in loadable
46  * modules.  Particular numeric privilege assignments are part of the
47  * loadable kernel module ABI, and should not be changed across minor
48  * releases.
49  *
50  * When adding a new privilege, remember to determine if it's appropriate
51  * for use in jail, and update the privilege switch in prison_priv_check()
52  * in kern_jail.c as necessary.
53  */
54
55 /*
56  * Track beginning of privilege list.
57  */
58 #define _PRIV_LOWEST    1
59
60 /*
61  * The remaining privileges typically correspond to one or a small
62  * number of specific privilege checks, and have (relatively) precise
63  * meanings.  They are loosely sorted into a set of base system
64  * privileges, such as the ability to reboot, and then loosely by
65  * subsystem, indicated by a subsystem name.
66  */
67 #define _PRIV_ROOT              1       /* Removed. */
68 #define PRIV_ACCT               2       /* Manage process accounting. */
69 #define PRIV_MAXFILES           3       /* Exceed system open files limit. */
70 #define PRIV_MAXPROC            4       /* Exceed system processes limit. */
71 #define PRIV_KTRACE             5       /* Set/clear KTRFAC_ROOT on ktrace. */
72 #define PRIV_SETDUMPER          6       /* Configure dump device. */
73 #define PRIV_REBOOT             8       /* Can reboot system. */
74 #define PRIV_SWAPON             9       /* Can swapon(). */
75 #define PRIV_SWAPOFF            10      /* Can swapoff(). */
76 #define PRIV_MSGBUF             11      /* Can read kernel message buffer. */
77 #define PRIV_IO                 12      /* Can perform low-level I/O. */
78 #define PRIV_KEYBOARD           13      /* Reprogram keyboard. */
79 #define PRIV_DRIVER             14      /* Low-level driver privilege. */
80 #define PRIV_ADJTIME            15      /* Set time adjustment. */
81 #define PRIV_NTP_ADJTIME        16      /* Set NTP time adjustment. */
82 #define PRIV_CLOCK_SETTIME      17      /* Can call clock_settime. */
83 #define PRIV_SETTIMEOFDAY       18      /* Can call settimeofday. */
84 #define _PRIV_SETHOSTID         19      /* Removed. */
85 #define _PRIV_SETDOMAINNAME     20      /* Removed. */
86
87 /*
88  * Audit subsystem privileges.
89  */
90 #define PRIV_AUDIT_CONTROL      40      /* Can configure audit. */
91 #define PRIV_AUDIT_FAILSTOP     41      /* Can run during audit fail stop. */
92 #define PRIV_AUDIT_GETAUDIT     42      /* Can get proc audit properties. */
93 #define PRIV_AUDIT_SETAUDIT     43      /* Can set proc audit properties. */
94 #define PRIV_AUDIT_SUBMIT       44      /* Can submit an audit record. */
95
96 /*
97  * Credential management privileges.
98  */
99 #define PRIV_CRED_SETUID        50      /* setuid. */
100 #define PRIV_CRED_SETEUID       51      /* seteuid to !ruid and !svuid. */
101 #define PRIV_CRED_SETGID        52      /* setgid. */
102 #define PRIV_CRED_SETEGID       53      /* setgid to !rgid and !svgid. */
103 #define PRIV_CRED_SETGROUPS     54      /* Set process additional groups. */
104 #define PRIV_CRED_SETREUID      55      /* setreuid. */
105 #define PRIV_CRED_SETREGID      56      /* setregid. */
106 #define PRIV_CRED_SETRESUID     57      /* setresuid. */
107 #define PRIV_CRED_SETRESGID     58      /* setresgid. */
108 #define PRIV_SEEOTHERGIDS       59      /* Exempt bsd.seeothergids. */
109 #define PRIV_SEEOTHERUIDS       60      /* Exempt bsd.seeotheruids. */
110
111 /*
112  * Debugging privileges.
113  */
114 #define PRIV_DEBUG_DIFFCRED     80      /* Exempt debugging other users. */
115 #define PRIV_DEBUG_SUGID        81      /* Exempt debugging setuid proc. */
116 #define PRIV_DEBUG_UNPRIV       82      /* Exempt unprivileged debug limit. */
117 #define PRIV_DEBUG_DENIED       83      /* Exempt P2_NOTRACE. */
118
119 /*
120  * Dtrace privileges.
121  */
122 #define PRIV_DTRACE_KERNEL      90      /* Allow use of DTrace on the kernel. */
123 #define PRIV_DTRACE_PROC        91      /* Allow attaching DTrace to process. */
124 #define PRIV_DTRACE_USER        92      /* Process may submit DTrace events. */
125
126 /*
127  * Firmware privilegs.
128  */
129 #define PRIV_FIRMWARE_LOAD      100     /* Can load firmware. */
130
131 /*
132  * Jail privileges.
133  */
134 #define PRIV_JAIL_ATTACH        110     /* Attach to a jail. */
135 #define PRIV_JAIL_SET           111     /* Set jail parameters. */
136 #define PRIV_JAIL_REMOVE        112     /* Remove a jail. */
137
138 /*
139  * Kernel environment privileges.
140  */
141 #define PRIV_KENV_SET           120     /* Set kernel env. variables. */
142 #define PRIV_KENV_UNSET         121     /* Unset kernel env. variables. */
143
144 /*
145  * Loadable kernel module privileges.
146  */
147 #define PRIV_KLD_LOAD           130     /* Load a kernel module. */
148 #define PRIV_KLD_UNLOAD         131     /* Unload a kernel module. */
149
150 /*
151  * Privileges associated with the MAC Framework and specific MAC policy
152  * modules.
153  */
154 #define PRIV_MAC_PARTITION      140     /* Privilege in mac_partition policy. */
155 #define PRIV_MAC_PRIVS          141     /* Privilege in the mac_privs policy. */
156
157 /*
158  * Process-related privileges.
159  */
160 #define PRIV_PROC_LIMIT         160     /* Exceed user process limit. */
161 #define PRIV_PROC_SETLOGIN      161     /* Can call setlogin. */
162 #define PRIV_PROC_SETRLIMIT     162     /* Can raise resources limits. */
163 #define PRIV_PROC_SETLOGINCLASS 163     /* Can call setloginclass(2). */
164
165 /*
166  * System V IPC privileges.
167  */
168 #define PRIV_IPC_READ           170     /* Can override IPC read perm. */
169 #define PRIV_IPC_WRITE          171     /* Can override IPC write perm. */
170 #define PRIV_IPC_ADMIN          172     /* Can override IPC owner-only perm. */
171 #define PRIV_IPC_MSGSIZE        173     /* Exempt IPC message queue limit. */
172
173 /*
174  * POSIX message queue privileges.
175  */
176 #define PRIV_MQ_ADMIN           180     /* Can override msgq owner-only perm. */
177
178 /*
179  * Performance monitoring counter privileges.
180  */
181 #define PRIV_PMC_MANAGE         190     /* Can administer PMC. */
182 #define PRIV_PMC_SYSTEM         191     /* Can allocate a system-wide PMC. */
183
184 /*
185  * Scheduling privileges.
186  */
187 #define PRIV_SCHED_DIFFCRED     200     /* Exempt scheduling other users. */
188 #define PRIV_SCHED_SETPRIORITY  201     /* Can set lower nice value for proc. */
189 #define PRIV_SCHED_RTPRIO       202     /* Can set real time scheduling. */
190 #define PRIV_SCHED_SETPOLICY    203     /* Can set scheduler policy. */
191 #define PRIV_SCHED_SET          204     /* Can set thread scheduler. */
192 #define PRIV_SCHED_SETPARAM     205     /* Can set thread scheduler params. */
193 #define PRIV_SCHED_CPUSET       206     /* Can manipulate cpusets. */
194 #define PRIV_SCHED_CPUSET_INTR  207     /* Can adjust IRQ to CPU binding. */
195
196 /*
197  * POSIX semaphore privileges.
198  */
199 #define PRIV_SEM_WRITE          220     /* Can override sem write perm. */
200
201 /*
202  * Signal privileges.
203  */
204 #define PRIV_SIGNAL_DIFFCRED    230     /* Exempt signalling other users. */
205 #define PRIV_SIGNAL_SUGID       231     /* Non-conserv signal setuid proc. */
206
207 /*
208  * Sysctl privileges.
209  */
210 #define PRIV_SYSCTL_DEBUG       240     /* Can invoke sysctl.debug. */
211 #define PRIV_SYSCTL_WRITE       241     /* Can write sysctls. */
212 #define PRIV_SYSCTL_WRITEJAIL   242     /* Can write sysctls, jail permitted. */
213
214 /*
215  * TTY privileges.
216  */
217 #define PRIV_TTY_CONSOLE        250     /* Set console to tty. */
218 #define PRIV_TTY_DRAINWAIT      251     /* Set tty drain wait time. */
219 #define PRIV_TTY_DTRWAIT        252     /* Set DTR wait on tty. */
220 #define PRIV_TTY_EXCLUSIVE      253     /* Override tty exclusive flag. */
221 #define _PRIV_TTY_PRISON        254     /* Removed. */
222 #define PRIV_TTY_STI            255     /* Simulate input on another tty. */
223 #define PRIV_TTY_SETA           256     /* Set tty termios structure. */
224
225 /*
226  * UFS-specific privileges.
227  */
228 #define PRIV_UFS_EXTATTRCTL     270     /* Can configure EAs on UFS1. */
229 #define PRIV_UFS_QUOTAOFF       271     /* quotaoff(). */
230 #define PRIV_UFS_QUOTAON        272     /* quotaon(). */
231 #define PRIV_UFS_SETUSE         273     /* setuse(). */
232
233 /*
234  * ZFS-specific privileges.
235  */
236 #define PRIV_ZFS_POOL_CONFIG    280     /* Can configure ZFS pools. */
237 #define PRIV_ZFS_INJECT         281     /* Can inject faults in the ZFS fault
238                                            injection framework. */
239 #define PRIV_ZFS_JAIL           282     /* Can attach/detach ZFS file systems
240                                            to/from jails. */
241
242 /*
243  * NFS-specific privileges.
244  */
245 #define PRIV_NFS_DAEMON         290     /* Can become the NFS daemon. */
246 #define PRIV_NFS_LOCKD          291     /* Can become NFS lock daemon. */
247
248 /*
249  * VFS privileges.
250  */
251 #define PRIV_VFS_READ           310     /* Override vnode DAC read perm. */
252 #define PRIV_VFS_WRITE          311     /* Override vnode DAC write perm. */
253 #define PRIV_VFS_ADMIN          312     /* Override vnode DAC admin perm. */
254 #define PRIV_VFS_EXEC           313     /* Override vnode DAC exec perm. */
255 #define PRIV_VFS_LOOKUP         314     /* Override vnode DAC lookup perm. */
256 #define PRIV_VFS_BLOCKRESERVE   315     /* Can use free block reserve. */
257 #define PRIV_VFS_CHFLAGS_DEV    316     /* Can chflags() a device node. */
258 #define PRIV_VFS_CHOWN          317     /* Can set user; group to non-member. */
259 #define PRIV_VFS_CHROOT         318     /* chroot(). */
260 #define PRIV_VFS_RETAINSUGID    319     /* Can retain sugid bits on change. */
261 #define PRIV_VFS_EXCEEDQUOTA    320     /* Exempt from quota restrictions. */
262 #define PRIV_VFS_EXTATTR_SYSTEM 321     /* Operate on system EA namespace. */
263 #define PRIV_VFS_FCHROOT        322     /* fchroot(). */
264 #define PRIV_VFS_FHOPEN         323     /* Can fhopen(). */
265 #define PRIV_VFS_FHSTAT         324     /* Can fhstat(). */
266 #define PRIV_VFS_FHSTATFS       325     /* Can fhstatfs(). */
267 #define PRIV_VFS_GENERATION     326     /* stat() returns generation number. */
268 #define PRIV_VFS_GETFH          327     /* Can retrieve file handles. */
269 #define PRIV_VFS_GETQUOTA       328     /* getquota(). */
270 #define PRIV_VFS_LINK           329     /* bsd.hardlink_check_uid */
271 #define PRIV_VFS_MKNOD_BAD      330     /* Was: mknod() can mark bad inodes. */
272 #define PRIV_VFS_MKNOD_DEV      331     /* Can mknod() to create dev nodes. */
273 #define PRIV_VFS_MKNOD_WHT      332     /* Can mknod() to create whiteout. */
274 #define PRIV_VFS_MOUNT          333     /* Can mount(). */
275 #define PRIV_VFS_MOUNT_OWNER    334     /* Can manage other users' file systems. */
276 #define PRIV_VFS_MOUNT_EXPORTED 335     /* Can set MNT_EXPORTED on mount. */
277 #define PRIV_VFS_MOUNT_PERM     336     /* Override dev node perms at mount. */
278 #define PRIV_VFS_MOUNT_SUIDDIR  337     /* Can set MNT_SUIDDIR on mount. */
279 #define PRIV_VFS_MOUNT_NONUSER  338     /* Can perform a non-user mount. */
280 #define PRIV_VFS_SETGID         339     /* Can setgid if not in group. */
281 #define PRIV_VFS_SETQUOTA       340     /* setquota(). */
282 #define PRIV_VFS_STICKYFILE     341     /* Can set sticky bit on file. */
283 #define PRIV_VFS_SYSFLAGS       342     /* Can modify system flags. */
284 #define PRIV_VFS_UNMOUNT        343     /* Can unmount(). */
285 #define PRIV_VFS_STAT           344     /* Override vnode MAC stat perm. */
286 #define PRIV_VFS_READ_DIR       345     /* Can read(2) a dirfd, needs sysctl. */
287
288 /*
289  * Virtual memory privileges.
290  */
291 #define PRIV_VM_MADV_PROTECT    360     /* Can set MADV_PROTECT. */
292 #define PRIV_VM_MLOCK           361     /* Can mlock(), mlockall(). */
293 #define PRIV_VM_MUNLOCK         362     /* Can munlock(), munlockall(). */
294 #define PRIV_VM_SWAP_NOQUOTA    363     /*
295                                          * Can override the global
296                                          * swap reservation limits.
297                                          */
298 #define PRIV_VM_SWAP_NORLIMIT   364     /*
299                                          * Can override the per-uid
300                                          * swap reservation limits.
301                                          */
302
303 /*
304  * Device file system privileges.
305  */
306 #define PRIV_DEVFS_RULE         370     /* Can manage devfs rules. */
307 #define PRIV_DEVFS_SYMLINK      371     /* Can create symlinks in devfs. */
308
309 /*
310  * Random number generator privileges.
311  */
312 #define PRIV_RANDOM_RESEED      380     /* Closing /dev/random reseeds. */
313
314 /*
315  * Network stack privileges.
316  */
317 #define PRIV_NET_BRIDGE         390     /* Administer bridge. */
318 #define PRIV_NET_GRE            391     /* Administer GRE. */
319 #define _PRIV_NET_PPP           392     /* Removed. */
320 #define _PRIV_NET_SLIP          393     /* Removed. */
321 #define PRIV_NET_BPF            394     /* Monitor BPF. */
322 #define PRIV_NET_RAW            395     /* Open raw socket. */
323 #define PRIV_NET_ROUTE          396     /* Administer routing. */
324 #define PRIV_NET_TAP            397     /* Can open tap device. */
325 #define PRIV_NET_SETIFMTU       398     /* Set interface MTU. */
326 #define PRIV_NET_SETIFFLAGS     399     /* Set interface flags. */
327 #define PRIV_NET_SETIFCAP       400     /* Set interface capabilities. */
328 #define PRIV_NET_SETIFNAME      401     /* Set interface name. */
329 #define PRIV_NET_SETIFMETRIC    402     /* Set interface metrics. */
330 #define PRIV_NET_SETIFPHYS      403     /* Set interface physical layer prop. */
331 #define PRIV_NET_SETIFMAC       404     /* Set interface MAC label. */
332 #define PRIV_NET_ADDMULTI       405     /* Add multicast addr. to ifnet. */
333 #define PRIV_NET_DELMULTI       406     /* Delete multicast addr. from ifnet. */
334 #define PRIV_NET_HWIOCTL        407     /* Issue hardware ioctl on ifnet. */
335 #define PRIV_NET_SETLLADDR      408     /* Set interface link-level address. */
336 #define PRIV_NET_ADDIFGROUP     409     /* Add new interface group. */
337 #define PRIV_NET_DELIFGROUP     410     /* Delete interface group. */
338 #define PRIV_NET_IFCREATE       411     /* Create cloned interface. */
339 #define PRIV_NET_IFDESTROY      412     /* Destroy cloned interface. */
340 #define PRIV_NET_ADDIFADDR      413     /* Add protocol addr to interface. */
341 #define PRIV_NET_DELIFADDR      414     /* Delete protocol addr on interface. */
342 #define PRIV_NET_LAGG           415     /* Administer lagg interface. */
343 #define PRIV_NET_GIF            416     /* Administer gif interface. */
344 #define PRIV_NET_SETIFVNET      417     /* Move interface to vnet. */
345 #define PRIV_NET_SETIFDESCR     418     /* Set interface description. */
346 #define PRIV_NET_SETIFFIB       419     /* Set interface fib. */
347 #define PRIV_NET_VXLAN          420     /* Administer vxlan. */
348 #define PRIV_NET_SETLANPCP      421     /* Set LAN priority. */
349 #define PRIV_NET_SETVLANPCP     PRIV_NET_SETLANPCP /* Alias Set VLAN priority */
350
351 /*
352  * 802.11-related privileges.
353  */
354 #define PRIV_NET80211_VAP_GETKEY        440     /* Query VAP 802.11 keys. */
355 #define PRIV_NET80211_VAP_MANAGE        441     /* Administer 802.11 VAP */
356 #define PRIV_NET80211_VAP_SETMAC        442     /* Set VAP MAC address */
357 #define PRIV_NET80211_CREATE_VAP        443     /* Create a new VAP */
358
359 /*
360  * Placeholder for AppleTalk privileges, not supported anymore.
361  */
362 #define _PRIV_NETATALK_RESERVEDPORT     450     /* Bind low port number. */
363
364 /*
365  * ATM privileges.
366  */
367 #define PRIV_NETATM_CFG         460
368 #define PRIV_NETATM_ADD         461
369 #define PRIV_NETATM_DEL         462
370 #define PRIV_NETATM_SET         463
371
372 /*
373  * Bluetooth privileges.
374  */
375 #define PRIV_NETBLUETOOTH_RAW   470     /* Open raw bluetooth socket. */
376
377 /*
378  * Netgraph and netgraph module privileges.
379  */
380 #define PRIV_NETGRAPH_CONTROL   480     /* Open netgraph control socket. */
381 #define PRIV_NETGRAPH_TTY       481     /* Configure tty for netgraph. */
382
383 /*
384  * IPv4 and IPv6 privileges.
385  */
386 #define PRIV_NETINET_RESERVEDPORT       490     /* Bind low port number. */
387 #define PRIV_NETINET_IPFW       491     /* Administer IPFW firewall. */
388 #define PRIV_NETINET_DIVERT     492     /* Open IP divert socket. */
389 #define PRIV_NETINET_PF         493     /* Administer pf firewall. */
390 #define PRIV_NETINET_DUMMYNET   494     /* Administer DUMMYNET. */
391 #define PRIV_NETINET_CARP       495     /* Administer CARP. */
392 #define PRIV_NETINET_MROUTE     496     /* Administer multicast routing. */
393 #define PRIV_NETINET_RAW        497     /* Open netinet raw socket. */
394 #define PRIV_NETINET_GETCRED    498     /* Query netinet pcb credentials. */
395 #define PRIV_NETINET_ADDRCTRL6  499     /* Administer IPv6 address scopes. */
396 #define PRIV_NETINET_ND6        500     /* Administer IPv6 neighbor disc. */
397 #define PRIV_NETINET_SCOPE6     501     /* Administer IPv6 address scopes. */
398 #define PRIV_NETINET_ALIFETIME6 502     /* Administer IPv6 address lifetimes. */
399 #define PRIV_NETINET_IPSEC      503     /* Administer IPSEC. */
400 #define PRIV_NETINET_REUSEPORT  504     /* Allow [rapid] port/address reuse. */
401 #define PRIV_NETINET_SETHDROPTS 505     /* Set certain IPv4/6 header options. */
402 #define PRIV_NETINET_BINDANY    506     /* Allow bind to any address. */
403 #define PRIV_NETINET_HASHKEY    507     /* Get and set hash keys for IPv4/6. */
404
405 /*
406  * Placeholders for IPX/SPX privileges, not supported any more.
407  */
408 #define _PRIV_NETIPX_RESERVEDPORT       520     /* Bind low port number. */
409 #define _PRIV_NETIPX_RAW                521     /* Open netipx raw socket. */
410
411 /*
412  * NCP privileges.
413  */
414 #define PRIV_NETNCP             530     /* Use another user's connection. */
415
416 /*
417  * SMB privileges.
418  */
419 #define PRIV_NETSMB             540     /* Use another user's connection. */
420
421 /*
422  * VM86 privileges.
423  */
424 #define PRIV_VM86_INTCALL       550     /* Allow invoking vm86 int handlers. */
425
426 /*
427  * Set of reserved privilege values, which will be allocated to code as
428  * needed, in order to avoid renumbering later privileges due to insertion.
429  */
430 #define _PRIV_RESERVED0         560
431 #define _PRIV_RESERVED1         561
432 #define _PRIV_RESERVED2         562
433 #define _PRIV_RESERVED3         563
434 #define _PRIV_RESERVED4         564
435 #define _PRIV_RESERVED5         565
436 #define _PRIV_RESERVED6         566
437 #define _PRIV_RESERVED7         567
438 #define _PRIV_RESERVED8         568
439 #define _PRIV_RESERVED9         569
440 #define _PRIV_RESERVED10        570
441 #define _PRIV_RESERVED11        571
442 #define _PRIV_RESERVED12        572
443 #define _PRIV_RESERVED13        573
444 #define _PRIV_RESERVED14        574
445 #define _PRIV_RESERVED15        575
446
447 /*
448  * Define a set of valid privilege numbers that can be used by loadable
449  * modules that don't yet have privilege reservations.  Ideally, these should
450  * not be used, since their meaning is opaque to any policies that are aware
451  * of specific privileges, such as jail, and as such may be arbitrarily
452  * denied.
453  */
454 #define PRIV_MODULE0            600
455 #define PRIV_MODULE1            601
456 #define PRIV_MODULE2            602
457 #define PRIV_MODULE3            603
458 #define PRIV_MODULE4            604
459 #define PRIV_MODULE5            605
460 #define PRIV_MODULE6            606
461 #define PRIV_MODULE7            607
462 #define PRIV_MODULE8            608
463 #define PRIV_MODULE9            609
464 #define PRIV_MODULE10           610
465 #define PRIV_MODULE11           611
466 #define PRIV_MODULE12           612
467 #define PRIV_MODULE13           613
468 #define PRIV_MODULE14           614
469 #define PRIV_MODULE15           615
470
471 /*
472  * DDB(4) privileges.
473  */
474 #define PRIV_DDB_CAPTURE        620     /* Allow reading of DDB capture log. */
475
476 /*
477  * Arla/nnpfs privileges.
478  */
479 #define PRIV_NNPFS_DEBUG        630     /* Perforn ARLA_VIOC_NNPFSDEBUG. */
480
481 /*
482  * cpuctl(4) privileges.
483  */
484 #define PRIV_CPUCTL_WRMSR       640     /* Write model-specific register. */
485 #define PRIV_CPUCTL_UPDATE      641     /* Update cpu microcode. */
486
487 /*
488  * Capi4BSD privileges.
489  */
490 #define PRIV_C4B_RESET_CTLR     650     /* Load firmware, reset controller. */
491 #define PRIV_C4B_TRACE          651     /* Unrestricted CAPI message tracing. */
492
493 /*
494  * OpenAFS privileges.
495  */
496 #define PRIV_AFS_ADMIN          660     /* Can change AFS client settings. */
497 #define PRIV_AFS_DAEMON         661     /* Can become the AFS daemon. */
498
499 /*
500  * Resource Limits privileges.
501  */
502 #define PRIV_RCTL_GET_RACCT     670
503 #define PRIV_RCTL_GET_RULES     671
504 #define PRIV_RCTL_GET_LIMITS    672
505 #define PRIV_RCTL_ADD_RULE      673
506 #define PRIV_RCTL_REMOVE_RULE   674
507
508 /*
509  * mem(4) privileges.
510  */
511 #define PRIV_KMEM_READ          680     /* Open mem/kmem for reading. */
512 #define PRIV_KMEM_WRITE         681     /* Open mem/kmem for writing. */
513
514 /*
515  * Track end of privilege list.
516  */
517 #define _PRIV_HIGHEST           682
518
519 /*
520  * Validate that a named privilege is known by the privilege system.  Invalid
521  * privileges presented to the privilege system by a priv_check interface
522  * will result in a panic.  This is only approximate due to sparse allocation
523  * of the privilege space.
524  */
525 #define PRIV_VALID(x)   ((x) > _PRIV_LOWEST && (x) < _PRIV_HIGHEST)
526
527 #ifdef _KERNEL
528 /*
529  * Privilege check interfaces, modeled after historic suser() interfaces, but
530  * with the addition of a specific privilege name.  No flags are currently
531  * defined for the API.  Historically, flags specified using the real uid
532  * instead of the effective uid, and whether or not the check should be
533  * allowed in jail.
534  */
535 struct thread;
536 struct ucred;
537 int     priv_check(struct thread *td, int priv);
538 int     priv_check_cred(struct ucred *cred, int priv);
539 int     priv_check_cred_vfs_lookup(struct ucred *cred);
540 int     priv_check_cred_vfs_lookup_nomac(struct ucred *cred);
541 int     priv_check_cred_vfs_generation(struct ucred *cred);
542 #endif
543
544 #endif /* !_SYS_PRIV_H_ */