2 * SPDX-License-Identifier: BSD-3-Clause
4 * Copyright (c) 1982, 1986, 1993
5 * The Regents of the University of California. All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of the University nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #ifndef _SYS_PROTOSW_H_
33 #define _SYS_PROTOSW_H_
35 #include <sys/queue.h>
37 /* Forward declare these structures referenced from prototypes below. */
47 * Protocol switch table.
49 * Each protocol has a handle initializing one of these structures,
50 * which is used for protocol-protocol and system-protocol communication.
52 * In retrospect, it would be a lot nicer to use an interface
53 * similar to the vnode VOP interface.
60 /* USE THESE FOR YOUR PROTOTYPES ! */
61 typedef int pr_ctloutput_t(struct socket *, struct sockopt *);
62 typedef int pr_setsbopt_t(struct socket *, struct sockopt *);
63 typedef void pr_abort_t(struct socket *);
64 typedef int pr_accept_t(struct socket *, struct sockaddr *);
65 typedef int pr_attach_t(struct socket *, int, struct thread *);
66 typedef int pr_bind_t(struct socket *, struct sockaddr *, struct thread *);
67 typedef int pr_connect_t(struct socket *, struct sockaddr *,
69 typedef int pr_connect2_t(struct socket *, struct socket *);
70 typedef int pr_control_t(struct socket *, unsigned long, void *,
71 struct ifnet *, struct thread *);
72 typedef void pr_detach_t(struct socket *);
73 typedef int pr_disconnect_t(struct socket *);
74 typedef int pr_listen_t(struct socket *, int, struct thread *);
75 typedef int pr_peeraddr_t(struct socket *, struct sockaddr *);
76 typedef int pr_rcvd_t(struct socket *, int);
77 typedef int pr_rcvoob_t(struct socket *, struct mbuf *, int);
81 PRUS_MORETOCOME = 0x4,
85 typedef int pr_send_t(struct socket *, int, struct mbuf *,
86 struct sockaddr *, struct mbuf *, struct thread *);
87 typedef int pr_ready_t(struct socket *, struct mbuf *, int);
88 typedef int pr_sense_t(struct socket *, struct stat *);
89 typedef int pr_shutdown_t(struct socket *);
90 typedef int pr_flush_t(struct socket *, int);
91 typedef int pr_sockaddr_t(struct socket *, struct sockaddr *);
92 typedef int pr_sosend_t(struct socket *, struct sockaddr *, struct uio *,
93 struct mbuf *, struct mbuf *, int, struct thread *);
94 typedef int pr_soreceive_t(struct socket *, struct sockaddr **,
95 struct uio *, struct mbuf **, struct mbuf **, int *);
96 typedef int pr_sopoll_t(struct socket *, int, struct ucred *,
98 typedef void pr_sosetlabel_t(struct socket *);
99 typedef void pr_close_t(struct socket *);
100 typedef int pr_bindat_t(int, struct socket *, struct sockaddr *,
102 typedef int pr_connectat_t(int, struct socket *, struct sockaddr *,
104 typedef int pr_aio_queue_t(struct socket *, struct kaiocb *);
107 short pr_type; /* socket type used for */
108 short pr_protocol; /* protocol number */
109 short pr_flags; /* see below */
111 struct domain *pr_domain; /* domain protocol a member of */
113 pr_soreceive_t *pr_soreceive; /* recv(2) */
114 pr_rcvd_t *pr_rcvd; /* soreceive_generic() if PR_WANTRCVD */
115 pr_sosend_t *pr_sosend; /* send(2) */
116 pr_send_t *pr_send; /* send(2) via sosend_generic() */
117 pr_ready_t *pr_ready; /* sendfile/ktls readyness */
118 pr_sopoll_t *pr_sopoll; /* poll(2) */
120 pr_attach_t *pr_attach; /* creation: socreate(), sonewconn() */
121 pr_detach_t *pr_detach; /* destruction: sofree() */
122 pr_connect_t *pr_connect; /* connect(2) */
123 pr_disconnect_t *pr_disconnect; /* sodisconnect() */
124 pr_close_t *pr_close; /* close(2) */
125 pr_shutdown_t *pr_shutdown; /* shutdown(2) */
126 pr_abort_t *pr_abort; /* abrupt tear down: soabort() */
127 pr_aio_queue_t *pr_aio_queue; /* aio(9) */
129 pr_bind_t *pr_bind; /* bind(2) */
130 pr_bindat_t *pr_bindat; /* bindat(2) */
131 pr_listen_t *pr_listen; /* listen(2) */
132 pr_accept_t *pr_accept; /* accept(2) */
133 pr_connectat_t *pr_connectat; /* connectat(2) */
134 pr_connect2_t *pr_connect2; /* socketpair(2) */
135 pr_control_t *pr_control; /* ioctl(2) */
136 pr_rcvoob_t *pr_rcvoob; /* soreceive_rcvoob() */
138 pr_ctloutput_t *pr_ctloutput; /* control output (from above) */
139 pr_peeraddr_t *pr_peeraddr; /* getpeername(2) */
140 pr_sockaddr_t *pr_sockaddr; /* getsockname(2) */
141 pr_sense_t *pr_sense; /* stat(2) */
142 pr_flush_t *pr_flush; /* XXXGL: merge with pr_shutdown_t! */
143 pr_sosetlabel_t *pr_sosetlabel; /* MAC, XXXGL: remove */
144 pr_setsbopt_t *pr_setsbopt; /* Socket buffer ioctls */
149 * Values for pr_flags.
150 * PR_ADDR requires PR_ATOMIC;
151 * PR_ADDR and PR_CONNREQUIRED are mutually exclusive.
152 * PR_IMPLOPCL means that the protocol allows sendto without prior connect,
153 * and the protocol understands the MSG_EOF flag. The first property is
154 * is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed
156 * PR_SOCKBUF requires protocol to initialize and destroy its socket buffers
157 * in its pr_attach and pr_detach.
159 #define PR_ATOMIC 0x01 /* exchange atomic messages only */
160 #define PR_ADDR 0x02 /* addresses given with messages */
161 #define PR_CONNREQUIRED 0x04 /* connection required by protocol */
162 #define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */
163 #define PR_RIGHTS 0x10 /* passes capabilities */
164 #define PR_IMPLOPCL 0x20 /* implied open/close */
165 /* was PR_LASTHDR 0x40 enforce ipsec policy; last header */
166 #define PR_CAPATTACH 0x80 /* socket can attach in cap mode */
167 #define PR_SOCKBUF 0x100 /* private implementation of buffers */
170 * The arguments to ctloutput are:
171 * (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p);
172 * req is one of the actions listed below, so is a (struct socket *),
173 * level is an indication of which protocol layer the option is intended.
174 * optname is a protocol dependent socket option request,
175 * optval is a pointer to a mbuf-chain pointer, for value-return results.
176 * The protocol is responsible for disposal of the mbuf chain *optval
178 * the caller is responsible for any space held by *optval, when returned.
179 * A non-zero return from ctloutput gives an
180 * UNIX error number which should be passed to higher level software.
182 #define PRCO_GETOPT 0
183 #define PRCO_SETOPT 1
188 char *prcorequests[] = {
194 struct domain *pffinddomain(int family);
195 struct protosw *pffindproto(int family, int type, int proto);
196 int protosw_register(struct domain *, struct protosw *);
197 int protosw_unregister(struct protosw *);
199 /* Domains that are known to be avaliable for protosw_register(). */
200 extern struct domain inetdomain;
201 extern struct domain inet6domain;