]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/protosw.h
Add 'contrib/unifdef/' from commit '0da44885831dc0a43c4ca6ff04a2430993cc0a80'
[FreeBSD/FreeBSD.git] / sys / sys / protosw.h
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 1982, 1986, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. Neither the name of the University nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  *      @(#)protosw.h   8.1 (Berkeley) 6/2/93
32  */
33
34 #ifndef _SYS_PROTOSW_H_
35 #define _SYS_PROTOSW_H_
36
37 #include <sys/queue.h>
38
39 /* Forward declare these structures referenced from prototypes below. */
40 struct kaiocb;
41 struct mbuf;
42 struct thread;
43 struct sockaddr;
44 struct socket;
45 struct sockopt;
46
47 /*#ifdef _KERNEL*/
48 /*
49  * Protocol switch table.
50  *
51  * Each protocol has a handle initializing one of these structures,
52  * which is used for protocol-protocol and system-protocol communication.
53  *
54  * In retrospect, it would be a lot nicer to use an interface
55  * similar to the vnode VOP interface.
56  */
57 struct ifnet;
58 struct stat;
59 struct ucred;
60 struct uio;
61
62 /* USE THESE FOR YOUR PROTOTYPES ! */
63 typedef int     pr_ctloutput_t(struct socket *, struct sockopt *);
64 typedef int     pr_setsbopt_t(struct socket *, struct sockopt *);
65 typedef void    pr_abort_t(struct socket *);
66 typedef int     pr_accept_t(struct socket *, struct sockaddr **);
67 typedef int     pr_attach_t(struct socket *, int, struct thread *);
68 typedef int     pr_bind_t(struct socket *, struct sockaddr *, struct thread *);
69 typedef int     pr_connect_t(struct socket *, struct sockaddr *,
70                     struct thread *);
71 typedef int     pr_connect2_t(struct socket *, struct socket *);
72 typedef int     pr_control_t(struct socket *, unsigned long, void *,
73                     struct ifnet *, struct thread *);
74 typedef void    pr_detach_t(struct socket *);
75 typedef int     pr_disconnect_t(struct socket *);
76 typedef int     pr_listen_t(struct socket *, int, struct thread *);
77 typedef int     pr_peeraddr_t(struct socket *, struct sockaddr **);
78 typedef int     pr_rcvd_t(struct socket *, int);
79 typedef int     pr_rcvoob_t(struct socket *, struct mbuf *, int);
80 typedef enum {
81         PRUS_OOB =              0x1,
82         PRUS_EOF =              0x2,
83         PRUS_MORETOCOME =       0x4,
84         PRUS_NOTREADY =         0x8,
85         PRUS_IPV6 =             0x10,
86 } pr_send_flags_t;
87 typedef int     pr_send_t(struct socket *, int, struct mbuf *,
88                     struct sockaddr *, struct mbuf *, struct thread *);
89 typedef int     pr_ready_t(struct socket *, struct mbuf *, int);
90 typedef int     pr_sense_t(struct socket *, struct stat *);
91 typedef int     pr_shutdown_t(struct socket *);
92 typedef int     pr_flush_t(struct socket *, int);
93 typedef int     pr_sockaddr_t(struct socket *, struct sockaddr **);
94 typedef int     pr_sosend_t(struct socket *, struct sockaddr *, struct uio *,
95                     struct mbuf *, struct mbuf *, int, struct thread *);
96 typedef int     pr_soreceive_t(struct socket *, struct sockaddr **,
97                     struct uio *, struct mbuf **, struct mbuf **, int *);
98 typedef int     pr_sopoll_t(struct socket *, int, struct ucred *,
99                     struct thread *);
100 typedef void    pr_sosetlabel_t(struct socket *);
101 typedef void    pr_close_t(struct socket *);
102 typedef int     pr_bindat_t(int, struct socket *, struct sockaddr *,
103                     struct thread *);
104 typedef int     pr_connectat_t(int, struct socket *, struct sockaddr *,
105                     struct thread *);
106 typedef int     pr_aio_queue_t(struct socket *, struct kaiocb *);
107
108 struct protosw {
109         short   pr_type;                /* socket type used for */
110         short   pr_protocol;            /* protocol number */
111         short   pr_flags;               /* see below */
112         short   pr_unused;
113         struct  domain  *pr_domain;     /* domain protocol a member of */
114
115         pr_soreceive_t  *pr_soreceive;  /* recv(2) */
116         pr_rcvd_t       *pr_rcvd;       /* soreceive_generic() if PR_WANTRCVD */
117         pr_sosend_t     *pr_sosend;     /* send(2) */
118         pr_send_t       *pr_send;       /* send(2) via sosend_generic() */
119         pr_ready_t      *pr_ready;      /* sendfile/ktls readyness */
120         pr_sopoll_t     *pr_sopoll;     /* poll(2) */
121 /* Cache line #2 */
122         pr_attach_t     *pr_attach;     /* creation: socreate(), sonewconn() */
123         pr_detach_t     *pr_detach;     /* destruction: sofree() */
124         pr_connect_t    *pr_connect;    /* connect(2) */
125         pr_disconnect_t *pr_disconnect; /* sodisconnect() */
126         pr_close_t      *pr_close;      /* close(2) */
127         pr_shutdown_t   *pr_shutdown;   /* shutdown(2) */
128         pr_abort_t      *pr_abort;      /* abrupt tear down: soabort() */
129         pr_aio_queue_t  *pr_aio_queue;  /* aio(9) */
130 /* Cache line #3 */
131         pr_bind_t       *pr_bind;       /* bind(2) */
132         pr_bindat_t     *pr_bindat;     /* bindat(2) */
133         pr_listen_t     *pr_listen;     /* listen(2) */
134         pr_accept_t     *pr_accept;     /* accept(2) */
135         pr_connectat_t  *pr_connectat;  /* connectat(2) */
136         pr_connect2_t   *pr_connect2;   /* socketpair(2) */
137         pr_control_t    *pr_control;    /* ioctl(2) */
138         pr_rcvoob_t     *pr_rcvoob;     /* soreceive_rcvoob() */
139 /* Cache line #4 */
140         pr_ctloutput_t  *pr_ctloutput;  /* control output (from above) */
141         pr_peeraddr_t   *pr_peeraddr;   /* getpeername(2) */
142         pr_sockaddr_t   *pr_sockaddr;   /* getsockname(2) */
143         pr_sense_t      *pr_sense;      /* stat(2) */
144         pr_flush_t      *pr_flush;      /* XXXGL: merge with pr_shutdown_t! */
145         pr_sosetlabel_t *pr_sosetlabel; /* MAC, XXXGL: remove */
146         pr_setsbopt_t   *pr_setsbopt;   /* Socket buffer ioctls */
147 };
148 /*#endif*/
149
150 /*
151  * Values for pr_flags.
152  * PR_ADDR requires PR_ATOMIC;
153  * PR_ADDR and PR_CONNREQUIRED are mutually exclusive.
154  * PR_IMPLOPCL means that the protocol allows sendto without prior connect,
155  *      and the protocol understands the MSG_EOF flag.  The first property is
156  *      is only relevant if PR_CONNREQUIRED is set (otherwise sendto is allowed
157  *      anyhow).
158  * PR_SOCKBUF requires protocol to initialize and destroy its socket buffers
159  * in its pr_attach and pr_detach.
160  */
161 #define PR_ATOMIC       0x01            /* exchange atomic messages only */
162 #define PR_ADDR         0x02            /* addresses given with messages */
163 #define PR_CONNREQUIRED 0x04            /* connection required by protocol */
164 #define PR_WANTRCVD     0x08            /* want PRU_RCVD calls */
165 #define PR_RIGHTS       0x10            /* passes capabilities */
166 #define PR_IMPLOPCL     0x20            /* implied open/close */
167 /* was  PR_LASTHDR      0x40               enforce ipsec policy; last header */
168 #define PR_CAPATTACH    0x80            /* socket can attach in cap mode */
169 #define PR_SOCKBUF      0x100           /* private implementation of buffers */
170
171 /*
172  * The arguments to ctloutput are:
173  *      (*protosw[].pr_ctloutput)(req, so, level, optname, optval, p);
174  * req is one of the actions listed below, so is a (struct socket *),
175  * level is an indication of which protocol layer the option is intended.
176  * optname is a protocol dependent socket option request,
177  * optval is a pointer to a mbuf-chain pointer, for value-return results.
178  * The protocol is responsible for disposal of the mbuf chain *optval
179  * if supplied,
180  * the caller is responsible for any space held by *optval, when returned.
181  * A non-zero return from ctloutput gives an
182  * UNIX error number which should be passed to higher level software.
183  */
184 #define PRCO_GETOPT     0
185 #define PRCO_SETOPT     1
186
187 #define PRCO_NCMDS      2
188
189 #ifdef PRCOREQUESTS
190 char    *prcorequests[] = {
191         "GETOPT", "SETOPT",
192 };
193 #endif
194
195 #ifdef _KERNEL
196 struct domain *pffinddomain(int family);
197 struct protosw *pffindproto(int family, int type, int proto);
198 int protosw_register(struct domain *, struct protosw *);
199 int protosw_unregister(struct protosw *);
200
201 /* Domains that are known to be avaliable for protosw_register(). */
202 extern struct domain inetdomain;
203 extern struct domain inet6domain;
204 #endif
205
206 #endif