]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/signal.h
MFV r317781:
[FreeBSD/FreeBSD.git] / sys / sys / signal.h
1 /*-
2  * Copyright (c) 1982, 1986, 1989, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)signal.h    8.4 (Berkeley) 5/4/95
35  * $FreeBSD$
36  */
37
38 #ifndef _SYS_SIGNAL_H_
39 #define _SYS_SIGNAL_H_
40
41 #include <sys/cdefs.h>
42 #include <sys/_types.h>
43 #include <sys/_sigset.h>
44
45 #include <machine/_limits.h>    /* __MINSIGSTKSZ */
46 #include <machine/signal.h>     /* sig_atomic_t; trap codes; sigcontext */
47
48 #if __POSIX_VISIBLE >= 200809
49
50 #include <sys/_pthreadtypes.h>
51 #include <sys/_timespec.h>
52
53 #ifndef _SIZE_T_DECLARED
54 typedef __size_t        size_t;
55 #define _SIZE_T_DECLARED
56 #endif
57
58 #ifndef _UID_T_DECLARED
59 typedef __uid_t         uid_t;
60 #define _UID_T_DECLARED
61 #endif
62
63 #endif /* __POSIX_VISIBLE >= 200809 */
64
65 /*
66  * System defined signals.
67  */
68 #if __POSIX_VISIBLE || __XSI_VISIBLE
69 #define SIGHUP          1       /* hangup */
70 #endif
71 #define SIGINT          2       /* interrupt */
72 #if __POSIX_VISIBLE || __XSI_VISIBLE
73 #define SIGQUIT         3       /* quit */
74 #endif
75 #define SIGILL          4       /* illegal instr. (not reset when caught) */
76 #if __XSI_VISIBLE
77 #define SIGTRAP         5       /* trace trap (not reset when caught) */
78 #endif
79 #define SIGABRT         6       /* abort() */
80 #if __BSD_VISIBLE
81 #define SIGIOT          SIGABRT /* compatibility */
82 #define SIGEMT          7       /* EMT instruction */
83 #endif
84 #define SIGFPE          8       /* floating point exception */
85 #if __POSIX_VISIBLE || __XSI_VISIBLE
86 #define SIGKILL         9       /* kill (cannot be caught or ignored) */
87 #endif
88 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
89 #define SIGBUS          10      /* bus error */
90 #endif
91 #define SIGSEGV         11      /* segmentation violation */
92 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
93 #define SIGSYS          12      /* non-existent system call invoked */
94 #endif
95 #if __POSIX_VISIBLE || __XSI_VISIBLE
96 #define SIGPIPE         13      /* write on a pipe with no one to read it */
97 #define SIGALRM         14      /* alarm clock */
98 #endif
99 #define SIGTERM         15      /* software termination signal from kill */
100 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
101 #define SIGURG          16      /* urgent condition on IO channel */
102 #endif
103 #if __POSIX_VISIBLE || __XSI_VISIBLE
104 #define SIGSTOP         17      /* sendable stop signal not from tty */
105 #define SIGTSTP         18      /* stop signal from tty */
106 #define SIGCONT         19      /* continue a stopped process */
107 #define SIGCHLD         20      /* to parent on child stop or exit */
108 #define SIGTTIN         21      /* to readers pgrp upon background tty read */
109 #define SIGTTOU         22      /* like TTIN if (tp->t_local&LTOSTOP) */
110 #endif
111 #if __BSD_VISIBLE
112 #define SIGIO           23      /* input/output possible signal */
113 #endif
114 #if __XSI_VISIBLE
115 #define SIGXCPU         24      /* exceeded CPU time limit */
116 #define SIGXFSZ         25      /* exceeded file size limit */
117 #define SIGVTALRM       26      /* virtual time alarm */
118 #define SIGPROF         27      /* profiling time alarm */
119 #endif
120 #if __BSD_VISIBLE
121 #define SIGWINCH        28      /* window size changes */
122 #define SIGINFO         29      /* information request */
123 #endif
124 #if __POSIX_VISIBLE || __XSI_VISIBLE
125 #define SIGUSR1         30      /* user defined signal 1 */
126 #define SIGUSR2         31      /* user defined signal 2 */
127 #endif
128 #if __BSD_VISIBLE
129 #define SIGTHR          32      /* reserved by thread library. */
130 #define SIGLWP          SIGTHR
131 #define SIGLIBRT        33      /* reserved by real-time library. */
132 #endif
133
134 #define SIGRTMIN        65
135 #define SIGRTMAX        126
136
137 #define SIG_DFL         ((__sighandler_t *)0)
138 #define SIG_IGN         ((__sighandler_t *)1)
139 #define SIG_ERR         ((__sighandler_t *)-1)
140 /* #define      SIG_CATCH       ((__sighandler_t *)2) See signalvar.h */
141 #define SIG_HOLD        ((__sighandler_t *)3)
142
143 /*
144  * Type of a signal handling function.
145  *
146  * Language spec sez signal handlers take exactly one arg, even though we
147  * actually supply three.  Ugh!
148  *
149  * We don't try to hide the difference by leaving out the args because
150  * that would cause warnings about conformant programs.  Nonconformant
151  * programs can avoid the warnings by casting to (__sighandler_t *) or
152  * sig_t before calling signal() or assigning to sa_handler or sv_handler.
153  *
154  * The kernel should reverse the cast before calling the function.  It
155  * has no way to do this, but on most machines 1-arg and 3-arg functions
156  * have the same calling protocol so there is no problem in practice.
157  * A bit in sa_flags could be used to specify the number of args.
158  */
159 typedef void __sighandler_t(int);
160
161 #if __POSIX_VISIBLE || __XSI_VISIBLE
162 #ifndef _SIGSET_T_DECLARED
163 #define _SIGSET_T_DECLARED
164 typedef __sigset_t      sigset_t;
165 #endif
166 #endif
167
168 #if __POSIX_VISIBLE >= 199309 || __XSI_VISIBLE >= 500
169 union sigval {
170         /* Members as suggested by Annex C of POSIX 1003.1b. */
171         int     sival_int;
172         void    *sival_ptr;
173         /* 6.0 compatibility */
174         int     sigval_int;
175         void    *sigval_ptr;
176 };
177 #endif
178
179 #if __POSIX_VISIBLE >= 199309
180
181 struct pthread_attr;
182
183 struct sigevent {
184         int     sigev_notify;           /* Notification type */
185         int     sigev_signo;            /* Signal number */
186         union sigval sigev_value;       /* Signal value */
187         union {
188                 __lwpid_t       _threadid;
189                 struct {
190                         void (*_function)(union sigval);
191                         struct pthread_attr **_attribute;
192                 } _sigev_thread;
193                 unsigned short _kevent_flags;
194                 long __spare__[8];
195         } _sigev_un;
196 };
197
198 #if __BSD_VISIBLE
199 #define sigev_notify_kqueue             sigev_signo
200 #define sigev_notify_kevent_flags       _sigev_un._kevent_flags
201 #define sigev_notify_thread_id          _sigev_un._threadid
202 #endif
203 #define sigev_notify_function           _sigev_un._sigev_thread._function
204 #define sigev_notify_attributes         _sigev_un._sigev_thread._attribute
205
206 #define SIGEV_NONE      0               /* No async notification. */
207 #define SIGEV_SIGNAL    1               /* Generate a queued signal. */
208 #define SIGEV_THREAD    2               /* Call back from another pthread. */
209 #if __BSD_VISIBLE
210 #define SIGEV_KEVENT    3               /* Generate a kevent. */
211 #define SIGEV_THREAD_ID 4               /* Send signal to a kernel thread. */
212 #endif
213
214 #endif /* __POSIX_VISIBLE >= 199309 */
215
216 #if __POSIX_VISIBLE >= 199309 || __XSI_VISIBLE
217 typedef struct __siginfo {
218         int     si_signo;               /* signal number */
219         int     si_errno;               /* errno association */
220         /*
221          * Cause of signal, one of the SI_ macros or signal-specific
222          * values, i.e. one of the FPE_... values for SIGFPE.  This
223          * value is equivalent to the second argument to an old-style
224          * FreeBSD signal handler.
225          */
226         int     si_code;                /* signal code */
227         __pid_t si_pid;                 /* sending process */
228         __uid_t si_uid;                 /* sender's ruid */
229         int     si_status;              /* exit value */
230         void    *si_addr;               /* faulting instruction */
231         union sigval si_value;          /* signal value */
232         union   {
233                 struct {
234                         int     _trapno;/* machine specific trap code */
235                 } _fault;
236                 struct {
237                         int     _timerid;
238                         int     _overrun;
239                 } _timer;
240                 struct {
241                         int     _mqd;
242                 } _mesgq;
243                 struct {
244                         long    _band;          /* band event for SIGPOLL */
245                 } _poll;                        /* was this ever used ? */
246                 struct {
247                         long    __spare1__;
248                         int     __spare2__[7];
249                 } __spare__;
250         } _reason;
251 } siginfo_t;
252
253 #define si_trapno       _reason._fault._trapno
254 #define si_timerid      _reason._timer._timerid
255 #define si_overrun      _reason._timer._overrun
256 #define si_mqd          _reason._mesgq._mqd
257 #define si_band         _reason._poll._band
258
259 /** si_code **/
260 /* codes for SIGILL */
261 #define ILL_ILLOPC      1       /* Illegal opcode.                      */
262 #define ILL_ILLOPN      2       /* Illegal operand.                     */
263 #define ILL_ILLADR      3       /* Illegal addressing mode.             */
264 #define ILL_ILLTRP      4       /* Illegal trap.                        */
265 #define ILL_PRVOPC      5       /* Privileged opcode.                   */
266 #define ILL_PRVREG      6       /* Privileged register.                 */
267 #define ILL_COPROC      7       /* Coprocessor error.                   */
268 #define ILL_BADSTK      8       /* Internal stack error.                */
269
270 /* codes for SIGBUS */
271 #define BUS_ADRALN      1       /* Invalid address alignment.           */
272 #define BUS_ADRERR      2       /* Nonexistent physical address.        */
273 #define BUS_OBJERR      3       /* Object-specific hardware error.      */
274
275 /* codes for SIGSEGV */
276 #define SEGV_MAPERR     1       /* Address not mapped to object.        */
277 #define SEGV_ACCERR     2       /* Invalid permissions for mapped       */
278                                 /* object.                              */
279
280 /* codes for SIGFPE */
281 #define FPE_INTOVF      1       /* Integer overflow.                    */
282 #define FPE_INTDIV      2       /* Integer divide by zero.              */
283 #define FPE_FLTDIV      3       /* Floating point divide by zero.       */
284 #define FPE_FLTOVF      4       /* Floating point overflow.             */
285 #define FPE_FLTUND      5       /* Floating point underflow.            */
286 #define FPE_FLTRES      6       /* Floating point inexact result.       */
287 #define FPE_FLTINV      7       /* Invalid floating point operation.    */
288 #define FPE_FLTSUB      8       /* Subscript out of range.              */
289
290 /* codes for SIGTRAP */
291 #define TRAP_BRKPT      1       /* Process breakpoint.                  */
292 #define TRAP_TRACE      2       /* Process trace trap.                  */
293 #define TRAP_DTRACE     3       /* DTrace induced trap.                 */
294 #define TRAP_CAP        4       /* Capabilities protective trap.        */
295
296 /* codes for SIGCHLD */
297 #define CLD_EXITED      1       /* Child has exited                     */
298 #define CLD_KILLED      2       /* Child has terminated abnormally but  */
299                                 /* did not create a core file           */
300 #define CLD_DUMPED      3       /* Child has terminated abnormally and  */
301                                 /* created a core file                  */
302 #define CLD_TRAPPED     4       /* Traced child has trapped             */
303 #define CLD_STOPPED     5       /* Child has stopped                    */
304 #define CLD_CONTINUED   6       /* Stopped child has continued          */
305
306 /* codes for SIGPOLL */
307 #define POLL_IN         1       /* Data input available                 */
308 #define POLL_OUT        2       /* Output buffers available             */
309 #define POLL_MSG        3       /* Input message available              */
310 #define POLL_ERR        4       /* I/O Error                            */
311 #define POLL_PRI        5       /* High priority input available        */
312 #define POLL_HUP        6       /* Device disconnected                  */
313
314 #endif
315
316 #if __POSIX_VISIBLE || __XSI_VISIBLE
317 struct __siginfo;
318
319 /*
320  * Signal vector "template" used in sigaction call.
321  */
322 struct sigaction {
323         union {
324                 void    (*__sa_handler)(int);
325                 void    (*__sa_sigaction)(int, struct __siginfo *, void *);
326         } __sigaction_u;                /* signal handler */
327         int     sa_flags;               /* see signal options below */
328         sigset_t sa_mask;               /* signal mask to apply */
329 };
330
331 #define sa_handler      __sigaction_u.__sa_handler
332 #endif
333
334 #if __XSI_VISIBLE
335 /* If SA_SIGINFO is set, sa_sigaction must be used instead of sa_handler. */
336 #define sa_sigaction    __sigaction_u.__sa_sigaction
337 #endif
338
339 #if __POSIX_VISIBLE || __XSI_VISIBLE
340 #define SA_NOCLDSTOP    0x0008  /* do not generate SIGCHLD on child stop */
341 #endif /* __POSIX_VISIBLE || __XSI_VISIBLE */
342
343 #if __XSI_VISIBLE
344 #define SA_ONSTACK      0x0001  /* take signal on signal stack */
345 #define SA_RESTART      0x0002  /* restart system call on signal return */
346 #define SA_RESETHAND    0x0004  /* reset to SIG_DFL when taking signal */
347 #define SA_NODEFER      0x0010  /* don't mask the signal we're delivering */
348 #define SA_NOCLDWAIT    0x0020  /* don't keep zombies around */
349 #define SA_SIGINFO      0x0040  /* signal handler with SA_SIGINFO args */
350 #endif
351
352 #if __BSD_VISIBLE
353 #define NSIG            32      /* number of old signals (counting 0) */
354 #endif
355
356 #if __POSIX_VISIBLE || __XSI_VISIBLE
357 #define SI_NOINFO       0               /* No signal info besides si_signo. */
358 #define SI_USER         0x10001         /* Signal sent by kill(). */
359 #define SI_QUEUE        0x10002         /* Signal sent by the sigqueue(). */
360 #define SI_TIMER        0x10003         /* Signal generated by expiration of */
361                                         /* a timer set by timer_settime(). */
362 #define SI_ASYNCIO      0x10004         /* Signal generated by completion of */
363                                         /* an asynchronous I/O request.*/
364 #define SI_MESGQ        0x10005         /* Signal generated by arrival of a */
365                                         /* message on an empty message queue. */
366 #define SI_KERNEL       0x10006
367 #define SI_LWP          0x10007         /* Signal sent by thr_kill */
368 #endif
369 #if __BSD_VISIBLE
370 #define SI_UNDEFINED    0
371 #endif
372
373 #if __BSD_VISIBLE
374 typedef __sighandler_t  *sig_t; /* type of pointer to a signal function */
375 typedef void __siginfohandler_t(int, struct __siginfo *, void *);
376 #endif
377
378 #if __XSI_VISIBLE
379 #if __BSD_VISIBLE
380 #define __stack_t sigaltstack
381 #endif
382 typedef struct __stack_t stack_t;
383
384 #define SS_ONSTACK      0x0001  /* take signal on alternate stack */
385 #define SS_DISABLE      0x0004  /* disable taking signals on alternate stack */
386 #define MINSIGSTKSZ     __MINSIGSTKSZ           /* minimum stack size */
387 #define SIGSTKSZ        (MINSIGSTKSZ + 32768)   /* recommended stack size */
388 #endif
389
390 /*
391  * Structure used in sigaltstack call.  Its definition is always
392  * needed for __ucontext.  If __BSD_VISIBLE is defined, the structure
393  * tag is actually sigaltstack.
394  */
395 struct __stack_t {
396         void    *ss_sp;                 /* signal stack base */
397         __size_t ss_size;               /* signal stack length */
398         int     ss_flags;               /* SS_DISABLE and/or SS_ONSTACK */
399 };
400
401 #if __BSD_VISIBLE
402 /*
403  * 4.3 compatibility:
404  * Signal vector "template" used in sigvec call.
405  */
406 struct sigvec {
407         __sighandler_t *sv_handler;     /* signal handler */
408         int     sv_mask;                /* signal mask to apply */
409         int     sv_flags;               /* see signal options below */
410 };
411
412 #define SV_ONSTACK      SA_ONSTACK
413 #define SV_INTERRUPT    SA_RESTART      /* same bit, opposite sense */
414 #define SV_RESETHAND    SA_RESETHAND
415 #define SV_NODEFER      SA_NODEFER
416 #define SV_NOCLDSTOP    SA_NOCLDSTOP
417 #define SV_SIGINFO      SA_SIGINFO
418 #define sv_onstack      sv_flags        /* isn't compatibility wonderful! */
419 #endif
420
421 /* Keep this in one place only */
422 #if defined(_KERNEL) && defined(COMPAT_43) && \
423     !defined(__i386__)
424 struct osigcontext {
425         int _not_used;
426 };
427 #endif
428
429 #if __XSI_VISIBLE
430 /*
431  * Structure used in sigstack call.
432  */
433 struct sigstack {
434         void    *ss_sp;                 /* signal stack pointer */
435         int     ss_onstack;             /* current status */
436 };
437 #endif
438
439 #if __BSD_VISIBLE || __POSIX_VISIBLE > 0 && __POSIX_VISIBLE <= 200112
440 /*
441  * Macro for converting signal number to a mask suitable for
442  * sigblock().
443  */
444 #define sigmask(m)      (1 << ((m)-1))
445 #endif
446
447 #if __BSD_VISIBLE
448 #define BADSIG          SIG_ERR
449 #endif
450
451 #if __POSIX_VISIBLE || __XSI_VISIBLE
452 /*
453  * Flags for sigprocmask:
454  */
455 #define SIG_BLOCK       1       /* block specified signal set */
456 #define SIG_UNBLOCK     2       /* unblock specified signal set */
457 #define SIG_SETMASK     3       /* set specified signal set */
458 #endif
459
460 /*
461  * For historical reasons; programs expect signal's return value to be
462  * defined by <sys/signal.h>.
463  */
464 __BEGIN_DECLS
465 __sighandler_t *signal(int, __sighandler_t *);
466 __END_DECLS
467
468 #endif /* !_SYS_SIGNAL_H_ */