]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/signal.h
unbound: Vendor import 1.19.1
[FreeBSD/FreeBSD.git] / sys / sys / signal.h
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 1982, 1986, 1989, 1991, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  * (c) UNIX System Laboratories, Inc.
7  * All or some portions of this file are derived from material licensed
8  * to the University of California by American Telephone and Telegraph
9  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
10  * the permission of UNIX System Laboratories, Inc.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  * 3. Neither the name of the University nor the names of its contributors
21  *    may be used to endorse or promote products derived from this software
22  *    without specific prior written permission.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34  * SUCH DAMAGE.
35  */
36
37 #ifndef _SYS_SIGNAL_H_
38 #define _SYS_SIGNAL_H_
39
40 #include <sys/cdefs.h>
41 #include <sys/_types.h>
42 #include <sys/_sigset.h>
43
44 #include <machine/_limits.h>    /* __MINSIGSTKSZ */
45 #include <machine/signal.h>     /* sig_atomic_t; trap codes; sigcontext */
46
47 #if __POSIX_VISIBLE >= 200809
48
49 #include <sys/_pthreadtypes.h>
50 #include <sys/_timespec.h>
51
52 #ifndef _SIZE_T_DECLARED
53 typedef __size_t        size_t;
54 #define _SIZE_T_DECLARED
55 #endif
56
57 #ifndef _UID_T_DECLARED
58 typedef __uid_t         uid_t;
59 #define _UID_T_DECLARED
60 #endif
61
62 #endif /* __POSIX_VISIBLE >= 200809 */
63
64 /*
65  * System defined signals.
66  */
67 #if __POSIX_VISIBLE || __XSI_VISIBLE
68 #define SIGHUP          1       /* hangup */
69 #endif
70 #define SIGINT          2       /* interrupt */
71 #if __POSIX_VISIBLE || __XSI_VISIBLE
72 #define SIGQUIT         3       /* quit */
73 #endif
74 #define SIGILL          4       /* illegal instr. (not reset when caught) */
75 #if __XSI_VISIBLE
76 #define SIGTRAP         5       /* trace trap (not reset when caught) */
77 #endif
78 #define SIGABRT         6       /* abort() */
79 #if __BSD_VISIBLE
80 #define SIGIOT          SIGABRT /* compatibility */
81 #define SIGEMT          7       /* EMT instruction */
82 #endif
83 #define SIGFPE          8       /* floating point exception */
84 #if __POSIX_VISIBLE || __XSI_VISIBLE
85 #define SIGKILL         9       /* kill (cannot be caught or ignored) */
86 #endif
87 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
88 #define SIGBUS          10      /* bus error */
89 #endif
90 #define SIGSEGV         11      /* segmentation violation */
91 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
92 #define SIGSYS          12      /* non-existent system call invoked */
93 #endif
94 #if __POSIX_VISIBLE || __XSI_VISIBLE
95 #define SIGPIPE         13      /* write on a pipe with no one to read it */
96 #define SIGALRM         14      /* alarm clock */
97 #endif
98 #define SIGTERM         15      /* software termination signal from kill */
99 #if __POSIX_VISIBLE >= 200112 || __XSI_VISIBLE
100 #define SIGURG          16      /* urgent condition on IO channel */
101 #endif
102 #if __POSIX_VISIBLE || __XSI_VISIBLE
103 #define SIGSTOP         17      /* sendable stop signal not from tty */
104 #define SIGTSTP         18      /* stop signal from tty */
105 #define SIGCONT         19      /* continue a stopped process */
106 #define SIGCHLD         20      /* to parent on child stop or exit */
107 #define SIGTTIN         21      /* to readers pgrp upon background tty read */
108 #define SIGTTOU         22      /* like TTIN if (tp->t_local&LTOSTOP) */
109 #endif
110 #if __BSD_VISIBLE
111 #define SIGIO           23      /* input/output possible signal */
112 #endif
113 #if __XSI_VISIBLE
114 #define SIGXCPU         24      /* exceeded CPU time limit */
115 #define SIGXFSZ         25      /* exceeded file size limit */
116 #define SIGVTALRM       26      /* virtual time alarm */
117 #define SIGPROF         27      /* profiling time alarm */
118 #endif
119 #if __BSD_VISIBLE
120 #define SIGWINCH        28      /* window size changes */
121 #define SIGINFO         29      /* information request */
122 #endif
123 #if __POSIX_VISIBLE || __XSI_VISIBLE
124 #define SIGUSR1         30      /* user defined signal 1 */
125 #define SIGUSR2         31      /* user defined signal 2 */
126 #endif
127 #if __BSD_VISIBLE
128 #define SIGTHR          32      /* reserved by thread library. */
129 #define SIGLWP          SIGTHR
130 #define SIGLIBRT        33      /* reserved by real-time library. */
131 #endif
132
133 #define SIGRTMIN        65
134 #define SIGRTMAX        126
135
136 #define SIG_DFL         ((__sighandler_t *)0)
137 #define SIG_IGN         ((__sighandler_t *)1)
138 #define SIG_ERR         ((__sighandler_t *)-1)
139 /* #define      SIG_CATCH       ((__sighandler_t *)2) See signalvar.h */
140 #define SIG_HOLD        ((__sighandler_t *)3)
141
142 /*
143  * Type of a signal handling function.
144  *
145  * Language spec sez signal handlers take exactly one arg, even though we
146  * actually supply three.  Ugh!
147  *
148  * We don't try to hide the difference by leaving out the args because
149  * that would cause warnings about conformant programs.  Nonconformant
150  * programs can avoid the warnings by casting to (__sighandler_t *) or
151  * sig_t before calling signal() or assigning to sa_handler or sv_handler.
152  *
153  * The kernel should reverse the cast before calling the function.  It
154  * has no way to do this, but on most machines 1-arg and 3-arg functions
155  * have the same calling protocol so there is no problem in practice.
156  * A bit in sa_flags could be used to specify the number of args.
157  */
158 typedef void __sighandler_t(int);
159
160 #if __POSIX_VISIBLE || __XSI_VISIBLE
161 #ifndef _SIGSET_T_DECLARED
162 #define _SIGSET_T_DECLARED
163 typedef __sigset_t      sigset_t;
164 #endif
165 #endif
166
167 #if __POSIX_VISIBLE >= 199309 || __XSI_VISIBLE >= 500
168 union sigval {
169         /* Members as suggested by Annex C of POSIX 1003.1b. */
170         int     sival_int;
171         void    *sival_ptr;
172         /* 6.0 compatibility */
173         int     sigval_int;
174         void    *sigval_ptr;
175 };
176
177 #if defined(_WANT_LWPINFO32) || (defined(_KERNEL) && defined(__LP64__))
178 union sigval32 {
179         int     sival_int;
180         uint32_t sival_ptr;
181         /* 6.0 compatibility */
182         int     sigval_int;
183         uint32_t sigval_ptr;
184 };
185 #endif
186 #endif
187
188 #if __POSIX_VISIBLE >= 199309
189
190 struct pthread_attr;
191
192 struct sigevent {
193         int     sigev_notify;           /* Notification type */
194         int     sigev_signo;            /* Signal number */
195         union sigval sigev_value;       /* Signal value */
196         union {
197                 __lwpid_t       _threadid;
198                 struct {
199                         void (*_function)(union sigval);
200                         struct pthread_attr **_attribute;
201                 } _sigev_thread;
202                 unsigned short _kevent_flags;
203                 long __spare__[8];
204         } _sigev_un;
205 };
206
207 #if __BSD_VISIBLE
208 #define sigev_notify_kqueue             sigev_signo
209 #define sigev_notify_kevent_flags       _sigev_un._kevent_flags
210 #define sigev_notify_thread_id          _sigev_un._threadid
211 #endif
212 #define sigev_notify_function           _sigev_un._sigev_thread._function
213 #define sigev_notify_attributes         _sigev_un._sigev_thread._attribute
214
215 #define SIGEV_NONE      0               /* No async notification. */
216 #define SIGEV_SIGNAL    1               /* Generate a queued signal. */
217 #define SIGEV_THREAD    2               /* Call back from another pthread. */
218 #if __BSD_VISIBLE
219 #define SIGEV_KEVENT    3               /* Generate a kevent. */
220 #define SIGEV_THREAD_ID 4               /* Send signal to a kernel thread. */
221 #endif
222
223 #endif /* __POSIX_VISIBLE >= 199309 */
224
225 #if __POSIX_VISIBLE >= 199309 || __XSI_VISIBLE
226 typedef struct __siginfo {
227         int     si_signo;               /* signal number */
228         int     si_errno;               /* errno association */
229         /*
230          * Cause of signal, one of the SI_ macros or signal-specific
231          * values, i.e. one of the FPE_... values for SIGFPE.  This
232          * value is equivalent to the second argument to an old-style
233          * FreeBSD signal handler.
234          */
235         int     si_code;                /* signal code */
236         __pid_t si_pid;                 /* sending process */
237         __uid_t si_uid;                 /* sender's ruid */
238         int     si_status;              /* exit value */
239         void    *si_addr;               /* faulting instruction */
240         union sigval si_value;          /* signal value */
241         union   {
242                 struct {
243                         int     _trapno;/* machine specific trap code */
244                 } _fault;
245                 struct {
246                         int     _timerid;
247                         int     _overrun;
248                 } _timer;
249                 struct {
250                         int     _mqd;
251                 } _mesgq;
252                 struct {
253                         long    _band;          /* band event for SIGPOLL */
254                 } _poll;                        /* was this ever used ? */
255                 struct {
256                         int     _syscall;       /* Syscall number for signals
257                                                  * delivered as a result of
258                                                  * system calls denied by
259                                                  * Capsicum. */
260                 } _capsicum;
261                 struct {
262                         long    __spare1__;
263                         int     __spare2__[7];
264                 } __spare__;
265         } _reason;
266 } siginfo_t;
267
268 #define si_trapno       _reason._fault._trapno
269 #define si_timerid      _reason._timer._timerid
270 #define si_overrun      _reason._timer._overrun
271 #define si_mqd          _reason._mesgq._mqd
272 #define si_band         _reason._poll._band
273 #define si_syscall      _reason._capsicum._syscall
274
275 #if defined(_WANT_LWPINFO32) || (defined(_KERNEL) && defined(__LP64__))
276 struct siginfo32 {
277         int     si_signo;               /* signal number */
278         int     si_errno;               /* errno association */
279         int     si_code;                /* signal code */
280         __pid_t si_pid;                 /* sending process */
281         __uid_t si_uid;                 /* sender's ruid */
282         int     si_status;              /* exit value */
283         uint32_t si_addr;               /* faulting instruction */
284         union sigval32 si_value;        /* signal value */
285         union   {
286                 struct {
287                         int     _trapno;/* machine specific trap code */
288                 } _fault;
289                 struct {
290                         int     _timerid;
291                         int     _overrun;
292                 } _timer;
293                 struct {
294                         int     _mqd;
295                 } _mesgq;
296                 struct {
297                         int32_t _band;          /* band event for SIGPOLL */
298                 } _poll;                        /* was this ever used ? */
299                 struct {
300                         int32_t __spare1__;
301                         int     __spare2__[7];
302                 } __spare__;
303         } _reason;
304 };
305 #endif
306
307 /** si_code **/
308 /* codes for SIGILL */
309 #define ILL_ILLOPC      1       /* Illegal opcode.                      */
310 #define ILL_ILLOPN      2       /* Illegal operand.                     */
311 #define ILL_ILLADR      3       /* Illegal addressing mode.             */
312 #define ILL_ILLTRP      4       /* Illegal trap.                        */
313 #define ILL_PRVOPC      5       /* Privileged opcode.                   */
314 #define ILL_PRVREG      6       /* Privileged register.                 */
315 #define ILL_COPROC      7       /* Coprocessor error.                   */
316 #define ILL_BADSTK      8       /* Internal stack error.                */
317
318 /* codes for SIGBUS */
319 #define BUS_ADRALN      1       /* Invalid address alignment.           */
320 #define BUS_ADRERR      2       /* Nonexistent physical address.        */
321 #define BUS_OBJERR      3       /* Object-specific hardware error.      */
322 #define BUS_OOMERR      100     /* Non-standard: No memory.             */
323
324 /* codes for SIGSEGV */
325 #define SEGV_MAPERR     1       /* Address not mapped to object.        */
326 #define SEGV_ACCERR     2       /* Invalid permissions for mapped       */
327                                 /* object.                              */
328 #define SEGV_PKUERR     100     /* x86: PKU violation                   */
329
330 /* codes for SIGFPE */
331 #define FPE_INTOVF      1       /* Integer overflow.                    */
332 #define FPE_INTDIV      2       /* Integer divide by zero.              */
333 #define FPE_FLTDIV      3       /* Floating point divide by zero.       */
334 #define FPE_FLTOVF      4       /* Floating point overflow.             */
335 #define FPE_FLTUND      5       /* Floating point underflow.            */
336 #define FPE_FLTRES      6       /* Floating point inexact result.       */
337 #define FPE_FLTINV      7       /* Invalid floating point operation.    */
338 #define FPE_FLTSUB      8       /* Subscript out of range.              */
339 #define FPE_FLTIDO      9       /* Input denormal operation             */
340
341 /* codes for SIGTRAP */
342 #define TRAP_BRKPT      1       /* Process breakpoint.                  */
343 #define TRAP_TRACE      2       /* Process trace trap.                  */
344 #define TRAP_DTRACE     3       /* DTrace induced trap.                 */
345 #define TRAP_CAP        4       /* Capabilities protective trap.        */
346
347 /* codes for SIGCHLD */
348 #define CLD_EXITED      1       /* Child has exited                     */
349 #define CLD_KILLED      2       /* Child has terminated abnormally but  */
350                                 /* did not create a core file           */
351 #define CLD_DUMPED      3       /* Child has terminated abnormally and  */
352                                 /* created a core file                  */
353 #define CLD_TRAPPED     4       /* Traced child has trapped             */
354 #define CLD_STOPPED     5       /* Child has stopped                    */
355 #define CLD_CONTINUED   6       /* Stopped child has continued          */
356
357 /* codes for SIGPOLL */
358 #define POLL_IN         1       /* Data input available                 */
359 #define POLL_OUT        2       /* Output buffers available             */
360 #define POLL_MSG        3       /* Input message available              */
361 #define POLL_ERR        4       /* I/O Error                            */
362 #define POLL_PRI        5       /* High priority input available        */
363 #define POLL_HUP        6       /* Device disconnected                  */
364
365 #endif
366
367 #if __POSIX_VISIBLE || __XSI_VISIBLE
368 struct __siginfo;
369
370 /*
371  * Signal vector "template" used in sigaction call.
372  */
373 struct sigaction {
374         union {
375                 void    (*__sa_handler)(int);
376                 void    (*__sa_sigaction)(int, struct __siginfo *, void *);
377         } __sigaction_u;                /* signal handler */
378         int     sa_flags;               /* see signal options below */
379         sigset_t sa_mask;               /* signal mask to apply */
380 };
381
382 #define sa_handler      __sigaction_u.__sa_handler
383 #endif
384
385 #if __XSI_VISIBLE
386 /* If SA_SIGINFO is set, sa_sigaction must be used instead of sa_handler. */
387 #define sa_sigaction    __sigaction_u.__sa_sigaction
388 #endif
389
390 #if __POSIX_VISIBLE || __XSI_VISIBLE
391 #define SA_NOCLDSTOP    0x0008  /* do not generate SIGCHLD on child stop */
392 #endif /* __POSIX_VISIBLE || __XSI_VISIBLE */
393
394 #if __XSI_VISIBLE
395 #define SA_ONSTACK      0x0001  /* take signal on signal stack */
396 #define SA_RESTART      0x0002  /* restart system call on signal return */
397 #define SA_RESETHAND    0x0004  /* reset to SIG_DFL when taking signal */
398 #define SA_NODEFER      0x0010  /* don't mask the signal we're delivering */
399 #define SA_NOCLDWAIT    0x0020  /* don't keep zombies around */
400 #define SA_SIGINFO      0x0040  /* signal handler with SA_SIGINFO args */
401 #endif
402
403 #if __BSD_VISIBLE
404 #define NSIG            32      /* number of old signals (counting 0) */
405 #endif
406
407 #if __POSIX_VISIBLE || __XSI_VISIBLE
408 #define SI_NOINFO       0               /* No signal info besides si_signo. */
409 #define SI_USER         0x10001         /* Signal sent by kill(). */
410 #define SI_QUEUE        0x10002         /* Signal sent by the sigqueue(). */
411 #define SI_TIMER        0x10003         /* Signal generated by expiration of */
412                                         /* a timer set by timer_settime(). */
413 #define SI_ASYNCIO      0x10004         /* Signal generated by completion of */
414                                         /* an asynchronous I/O request.*/
415 #define SI_MESGQ        0x10005         /* Signal generated by arrival of a */
416                                         /* message on an empty message queue. */
417 #define SI_KERNEL       0x10006
418 #define SI_LWP          0x10007         /* Signal sent by thr_kill */
419 #endif
420 #if __BSD_VISIBLE
421 #define SI_UNDEFINED    0
422 #endif
423
424 #if __BSD_VISIBLE
425 typedef __sighandler_t  *sig_t; /* type of pointer to a signal function */
426 typedef void __siginfohandler_t(int, struct __siginfo *, void *);
427 #endif
428
429 #if __XSI_VISIBLE
430 #if __BSD_VISIBLE
431 #define __stack_t sigaltstack
432 #endif
433 typedef struct __stack_t stack_t;
434
435 #define SS_ONSTACK      0x0001  /* take signal on alternate stack */
436 #define SS_DISABLE      0x0004  /* disable taking signals on alternate stack */
437 #define MINSIGSTKSZ     __MINSIGSTKSZ           /* minimum stack size */
438 #define SIGSTKSZ        (MINSIGSTKSZ + 32768)   /* recommended stack size */
439 #endif
440
441 /*
442  * Structure used in sigaltstack call.  Its definition is always
443  * needed for __ucontext.  If __BSD_VISIBLE is defined, the structure
444  * tag is actually sigaltstack.
445  */
446 struct __stack_t {
447         void    *ss_sp;                 /* signal stack base */
448         __size_t ss_size;               /* signal stack length */
449         int     ss_flags;               /* SS_DISABLE and/or SS_ONSTACK */
450 };
451
452 #if __BSD_VISIBLE
453 /*
454  * 4.3 compatibility:
455  * Signal vector "template" used in sigvec call.
456  */
457 struct sigvec {
458         __sighandler_t *sv_handler;     /* signal handler */
459         int     sv_mask;                /* signal mask to apply */
460         int     sv_flags;               /* see signal options below */
461 };
462
463 #define SV_ONSTACK      SA_ONSTACK
464 #define SV_INTERRUPT    SA_RESTART      /* same bit, opposite sense */
465 #define SV_RESETHAND    SA_RESETHAND
466 #define SV_NODEFER      SA_NODEFER
467 #define SV_NOCLDSTOP    SA_NOCLDSTOP
468 #define SV_SIGINFO      SA_SIGINFO
469 #define sv_onstack      sv_flags        /* isn't compatibility wonderful! */
470 #endif
471
472 /* Keep this in one place only */
473 #if defined(_KERNEL) && defined(COMPAT_43) && \
474     !defined(__i386__)
475 struct osigcontext {
476         int _not_used;
477 };
478 #endif
479
480 #if __XSI_VISIBLE
481 /*
482  * Structure used in sigstack call.
483  */
484 struct sigstack {
485         void    *ss_sp;                 /* signal stack pointer */
486         int     ss_onstack;             /* current status */
487 };
488 #endif
489
490 #if __BSD_VISIBLE || __POSIX_VISIBLE > 0 && __POSIX_VISIBLE <= 200112
491 /*
492  * Macro for converting signal number to a mask suitable for
493  * sigblock().
494  */
495 #define sigmask(m)      (1 << ((m)-1))
496 #endif
497
498 #if __BSD_VISIBLE
499 #define BADSIG          SIG_ERR
500 #endif
501
502 #if __POSIX_VISIBLE || __XSI_VISIBLE
503 /*
504  * Flags for sigprocmask:
505  */
506 #define SIG_BLOCK       1       /* block specified signal set */
507 #define SIG_UNBLOCK     2       /* unblock specified signal set */
508 #define SIG_SETMASK     3       /* set specified signal set */
509 #endif
510
511 /*
512  * For historical reasons; programs expect signal's return value to be
513  * defined by <sys/signal.h>.
514  */
515 __BEGIN_DECLS
516 __sighandler_t *signal(int, __sighandler_t *);
517 __END_DECLS
518
519 #endif /* !_SYS_SIGNAL_H_ */