]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/sys/time.h
Implement pci_enable_msi() and pci_disable_msi() in the LinuxKPI.
[FreeBSD/FreeBSD.git] / sys / sys / time.h
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 1982, 1986, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. Neither the name of the University nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  *      @(#)time.h      8.5 (Berkeley) 5/4/95
32  * $FreeBSD$
33  */
34
35 #ifndef _SYS_TIME_H_
36 #define _SYS_TIME_H_
37
38 #include <sys/_timeval.h>
39 #include <sys/types.h>
40 #include <sys/timespec.h>
41
42 struct timezone {
43         int     tz_minuteswest; /* minutes west of Greenwich */
44         int     tz_dsttime;     /* type of dst correction */
45 };
46 #define DST_NONE        0       /* not on dst */
47 #define DST_USA         1       /* USA style dst */
48 #define DST_AUST        2       /* Australian style dst */
49 #define DST_WET         3       /* Western European dst */
50 #define DST_MET         4       /* Middle European dst */
51 #define DST_EET         5       /* Eastern European dst */
52 #define DST_CAN         6       /* Canada */
53
54 #if __BSD_VISIBLE
55 struct bintime {
56         time_t  sec;
57         uint64_t frac;
58 };
59
60 static __inline void
61 bintime_addx(struct bintime *_bt, uint64_t _x)
62 {
63         uint64_t _u;
64
65         _u = _bt->frac;
66         _bt->frac += _x;
67         if (_u > _bt->frac)
68                 _bt->sec++;
69 }
70
71 static __inline void
72 bintime_add(struct bintime *_bt, const struct bintime *_bt2)
73 {
74         uint64_t _u;
75
76         _u = _bt->frac;
77         _bt->frac += _bt2->frac;
78         if (_u > _bt->frac)
79                 _bt->sec++;
80         _bt->sec += _bt2->sec;
81 }
82
83 static __inline void
84 bintime_sub(struct bintime *_bt, const struct bintime *_bt2)
85 {
86         uint64_t _u;
87
88         _u = _bt->frac;
89         _bt->frac -= _bt2->frac;
90         if (_u < _bt->frac)
91                 _bt->sec--;
92         _bt->sec -= _bt2->sec;
93 }
94
95 static __inline void
96 bintime_mul(struct bintime *_bt, u_int _x)
97 {
98         uint64_t _p1, _p2;
99
100         _p1 = (_bt->frac & 0xffffffffull) * _x;
101         _p2 = (_bt->frac >> 32) * _x + (_p1 >> 32);
102         _bt->sec *= _x;
103         _bt->sec += (_p2 >> 32);
104         _bt->frac = (_p2 << 32) | (_p1 & 0xffffffffull);
105 }
106
107 static __inline void
108 bintime_shift(struct bintime *_bt, int _exp)
109 {
110
111         if (_exp > 0) {
112                 _bt->sec <<= _exp;
113                 _bt->sec |= _bt->frac >> (64 - _exp);
114                 _bt->frac <<= _exp;
115         } else if (_exp < 0) {
116                 _bt->frac >>= -_exp;
117                 _bt->frac |= (uint64_t)_bt->sec << (64 + _exp);
118                 _bt->sec >>= -_exp;
119         }
120 }
121
122 #define bintime_clear(a)        ((a)->sec = (a)->frac = 0)
123 #define bintime_isset(a)        ((a)->sec || (a)->frac)
124 #define bintime_cmp(a, b, cmp)                                          \
125         (((a)->sec == (b)->sec) ?                                       \
126             ((a)->frac cmp (b)->frac) :                                 \
127             ((a)->sec cmp (b)->sec))
128
129 #define SBT_1S  ((sbintime_t)1 << 32)
130 #define SBT_1M  (SBT_1S * 60)
131 #define SBT_1MS (SBT_1S / 1000)
132 #define SBT_1US (SBT_1S / 1000000)
133 #define SBT_1NS (SBT_1S / 1000000000) /* beware rounding, see nstosbt() */
134 #define SBT_MAX 0x7fffffffffffffffLL
135
136 static __inline int
137 sbintime_getsec(sbintime_t _sbt)
138 {
139
140         return (_sbt >> 32);
141 }
142
143 static __inline sbintime_t
144 bttosbt(const struct bintime _bt)
145 {
146
147         return (((sbintime_t)_bt.sec << 32) + (_bt.frac >> 32));
148 }
149
150 static __inline struct bintime
151 sbttobt(sbintime_t _sbt)
152 {
153         struct bintime _bt;
154
155         _bt.sec = _sbt >> 32;
156         _bt.frac = _sbt << 32;
157         return (_bt);
158 }
159
160 /*
161  * Decimal<->sbt conversions.  Multiplying or dividing by SBT_1NS results in
162  * large roundoff errors which sbttons() and nstosbt() avoid.  Millisecond and
163  * microsecond functions are also provided for completeness.
164  *
165  * These functions return the smallest sbt larger or equal to the
166  * number of seconds requested so that sbttoX(Xtosbt(y)) == y.  Unlike
167  * top of second computations below, which require that we tick at the
168  * top of second, these need to be rounded up so we do whatever for at
169  * least as long as requested.
170  *
171  * The naive computation we'd do is this
172  *      ((unit * 2^64 / SIFACTOR) + 2^32-1) >> 32
173  * However, that overflows. Instead, we compute
174  *      ((unit * 2^63 / SIFACTOR) + 2^31-1) >> 32
175  * and use pre-computed constants that are the ceil of the 2^63 / SIFACTOR
176  * term to ensure we are using exactly the right constant. We use the lesser
177  * evil of ull rather than a uint64_t cast to ensure we have well defined
178  * right shift semantics. With these changes, we get all the ns, us and ms
179  * conversions back and forth right.
180  * Note: This file is used for both kernel and userland includes, so we can't
181  * rely on KASSERT being defined, nor can we pollute the namespace by including
182  * assert.h.
183  */
184 static __inline int64_t
185 sbttons(sbintime_t _sbt)
186 {
187         uint64_t ns;
188
189 #ifdef KASSERT
190         KASSERT(_sbt >= 0, ("Negative values illegal for sbttons: %jx", _sbt));
191 #endif
192         ns = _sbt;
193         if (ns >= SBT_1S)
194                 ns = (ns >> 32) * 1000000000;
195         else
196                 ns = 0;
197
198         return (ns + (1000000000 * (_sbt & 0xffffffffu) >> 32));
199 }
200
201 static __inline sbintime_t
202 nstosbt(int64_t _ns)
203 {
204         sbintime_t sb = 0;
205
206 #ifdef KASSERT
207         KASSERT(_ns >= 0, ("Negative values illegal for nstosbt: %jd", _ns));
208 #endif
209         if (_ns >= SBT_1S) {
210                 sb = (_ns / 1000000000) * SBT_1S;
211                 _ns = _ns % 1000000000;
212         }
213         /* 9223372037 = ceil(2^63 / 1000000000) */
214         sb += ((_ns * 9223372037ull) + 0x7fffffff) >> 31;
215         return (sb);
216 }
217
218 static __inline int64_t
219 sbttous(sbintime_t _sbt)
220 {
221
222         return ((1000000 * _sbt) >> 32);
223 }
224
225 static __inline sbintime_t
226 ustosbt(int64_t _us)
227 {
228         sbintime_t sb = 0;
229
230 #ifdef KASSERT
231         KASSERT(_us >= 0, ("Negative values illegal for ustosbt: %jd", _us));
232 #endif
233         if (_us >= SBT_1S) {
234                 sb = (_us / 1000000) * SBT_1S;
235                 _us = _us % 1000000;
236         }
237         /* 9223372036855 = ceil(2^63 / 1000000) */
238         sb += ((_us * 9223372036855ull) + 0x7fffffff) >> 31;
239         return (sb);
240 }
241
242 static __inline int64_t
243 sbttoms(sbintime_t _sbt)
244 {
245
246         return ((1000 * _sbt) >> 32);
247 }
248
249 static __inline sbintime_t
250 mstosbt(int64_t _ms)
251 {
252         sbintime_t sb = 0;
253
254 #ifdef KASSERT
255         KASSERT(_ms >= 0, ("Negative values illegal for mstosbt: %jd", _ms));
256 #endif
257         if (_ms >= SBT_1S) {
258                 sb = (_ms / 1000) * SBT_1S;
259                 _ms = _ms % 1000;
260         }
261         /* 9223372036854776 = ceil(2^63 / 1000) */
262         sb += ((_ms * 9223372036854776ull) + 0x7fffffff) >> 31;
263         return (sb);
264 }
265
266 /*-
267  * Background information:
268  *
269  * When converting between timestamps on parallel timescales of differing
270  * resolutions it is historical and scientific practice to round down rather
271  * than doing 4/5 rounding.
272  *
273  *   The date changes at midnight, not at noon.
274  *
275  *   Even at 15:59:59.999999999 it's not four'o'clock.
276  *
277  *   time_second ticks after N.999999999 not after N.4999999999
278  */
279
280 static __inline void
281 bintime2timespec(const struct bintime *_bt, struct timespec *_ts)
282 {
283
284         _ts->tv_sec = _bt->sec;
285         _ts->tv_nsec = ((uint64_t)1000000000 *
286             (uint32_t)(_bt->frac >> 32)) >> 32;
287 }
288
289 static __inline void
290 timespec2bintime(const struct timespec *_ts, struct bintime *_bt)
291 {
292
293         _bt->sec = _ts->tv_sec;
294         /* 18446744073 = int(2^64 / 1000000000) */
295         _bt->frac = _ts->tv_nsec * (uint64_t)18446744073LL;
296 }
297
298 static __inline void
299 bintime2timeval(const struct bintime *_bt, struct timeval *_tv)
300 {
301
302         _tv->tv_sec = _bt->sec;
303         _tv->tv_usec = ((uint64_t)1000000 * (uint32_t)(_bt->frac >> 32)) >> 32;
304 }
305
306 static __inline void
307 timeval2bintime(const struct timeval *_tv, struct bintime *_bt)
308 {
309
310         _bt->sec = _tv->tv_sec;
311         /* 18446744073709 = int(2^64 / 1000000) */
312         _bt->frac = _tv->tv_usec * (uint64_t)18446744073709LL;
313 }
314
315 static __inline struct timespec
316 sbttots(sbintime_t _sbt)
317 {
318         struct timespec _ts;
319
320         _ts.tv_sec = _sbt >> 32;
321         _ts.tv_nsec = sbttons((uint32_t)_sbt);
322         return (_ts);
323 }
324
325 static __inline sbintime_t
326 tstosbt(struct timespec _ts)
327 {
328
329         return (((sbintime_t)_ts.tv_sec << 32) + nstosbt(_ts.tv_nsec));
330 }
331
332 static __inline struct timeval
333 sbttotv(sbintime_t _sbt)
334 {
335         struct timeval _tv;
336
337         _tv.tv_sec = _sbt >> 32;
338         _tv.tv_usec = sbttous((uint32_t)_sbt);
339         return (_tv);
340 }
341
342 static __inline sbintime_t
343 tvtosbt(struct timeval _tv)
344 {
345
346         return (((sbintime_t)_tv.tv_sec << 32) + ustosbt(_tv.tv_usec));
347 }
348 #endif /* __BSD_VISIBLE */
349
350 #ifdef _KERNEL
351 /*
352  * Simple macros to convert ticks to milliseconds
353  * or microseconds and vice-versa. The answer
354  * will always be at least 1. Note the return
355  * value is a uint32_t however we step up the
356  * operations to 64 bit to avoid any overflow/underflow
357  * problems.
358  */
359 #define TICKS_2_MSEC(t) max(1, (uint32_t)(hz == 1000) ? \
360           (t) : (((uint64_t)(t) * (uint64_t)1000)/(uint64_t)hz))
361 #define TICKS_2_USEC(t) max(1, (uint32_t)(hz == 1000) ? \
362           ((t) * 1000) : (((uint64_t)(t) * (uint64_t)1000000)/(uint64_t)hz))
363 #define MSEC_2_TICKS(m) max(1, (uint32_t)((hz == 1000) ? \
364           (m) : ((uint64_t)(m) * (uint64_t)hz)/(uint64_t)1000))
365 #define USEC_2_TICKS(u) max(1, (uint32_t)((hz == 1000) ? \
366          ((u) / 1000) : ((uint64_t)(u) * (uint64_t)hz)/(uint64_t)1000000))
367
368 #endif
369 /* Operations on timespecs */
370 #define timespecclear(tvp)      ((tvp)->tv_sec = (tvp)->tv_nsec = 0)
371 #define timespecisset(tvp)      ((tvp)->tv_sec || (tvp)->tv_nsec)
372 #define timespeccmp(tvp, uvp, cmp)                                      \
373         (((tvp)->tv_sec == (uvp)->tv_sec) ?                             \
374             ((tvp)->tv_nsec cmp (uvp)->tv_nsec) :                       \
375             ((tvp)->tv_sec cmp (uvp)->tv_sec))
376
377 #define timespecadd(tsp, usp, vsp)                                      \
378         do {                                                            \
379                 (vsp)->tv_sec = (tsp)->tv_sec + (usp)->tv_sec;          \
380                 (vsp)->tv_nsec = (tsp)->tv_nsec + (usp)->tv_nsec;       \
381                 if ((vsp)->tv_nsec >= 1000000000L) {                    \
382                         (vsp)->tv_sec++;                                \
383                         (vsp)->tv_nsec -= 1000000000L;                  \
384                 }                                                       \
385         } while (0)
386 #define timespecsub(tsp, usp, vsp)                                      \
387         do {                                                            \
388                 (vsp)->tv_sec = (tsp)->tv_sec - (usp)->tv_sec;          \
389                 (vsp)->tv_nsec = (tsp)->tv_nsec - (usp)->tv_nsec;       \
390                 if ((vsp)->tv_nsec < 0) {                               \
391                         (vsp)->tv_sec--;                                \
392                         (vsp)->tv_nsec += 1000000000L;                  \
393                 }                                                       \
394         } while (0)
395
396 #ifdef _KERNEL
397
398 /* Operations on timevals. */
399
400 #define timevalclear(tvp)               ((tvp)->tv_sec = (tvp)->tv_usec = 0)
401 #define timevalisset(tvp)               ((tvp)->tv_sec || (tvp)->tv_usec)
402 #define timevalcmp(tvp, uvp, cmp)                                       \
403         (((tvp)->tv_sec == (uvp)->tv_sec) ?                             \
404             ((tvp)->tv_usec cmp (uvp)->tv_usec) :                       \
405             ((tvp)->tv_sec cmp (uvp)->tv_sec))
406
407 /* timevaladd and timevalsub are not inlined */
408
409 #endif /* _KERNEL */
410
411 #ifndef _KERNEL                 /* NetBSD/OpenBSD compatible interfaces */
412
413 #define timerclear(tvp)         ((tvp)->tv_sec = (tvp)->tv_usec = 0)
414 #define timerisset(tvp)         ((tvp)->tv_sec || (tvp)->tv_usec)
415 #define timercmp(tvp, uvp, cmp)                                 \
416         (((tvp)->tv_sec == (uvp)->tv_sec) ?                             \
417             ((tvp)->tv_usec cmp (uvp)->tv_usec) :                       \
418             ((tvp)->tv_sec cmp (uvp)->tv_sec))
419 #define timeradd(tvp, uvp, vvp)                                         \
420         do {                                                            \
421                 (vvp)->tv_sec = (tvp)->tv_sec + (uvp)->tv_sec;          \
422                 (vvp)->tv_usec = (tvp)->tv_usec + (uvp)->tv_usec;       \
423                 if ((vvp)->tv_usec >= 1000000) {                        \
424                         (vvp)->tv_sec++;                                \
425                         (vvp)->tv_usec -= 1000000;                      \
426                 }                                                       \
427         } while (0)
428 #define timersub(tvp, uvp, vvp)                                         \
429         do {                                                            \
430                 (vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec;          \
431                 (vvp)->tv_usec = (tvp)->tv_usec - (uvp)->tv_usec;       \
432                 if ((vvp)->tv_usec < 0) {                               \
433                         (vvp)->tv_sec--;                                \
434                         (vvp)->tv_usec += 1000000;                      \
435                 }                                                       \
436         } while (0)
437 #endif
438
439 /*
440  * Names of the interval timers, and structure
441  * defining a timer setting.
442  */
443 #define ITIMER_REAL     0
444 #define ITIMER_VIRTUAL  1
445 #define ITIMER_PROF     2
446
447 struct itimerval {
448         struct  timeval it_interval;    /* timer interval */
449         struct  timeval it_value;       /* current value */
450 };
451
452 /*
453  * Getkerninfo clock information structure
454  */
455 struct clockinfo {
456         int     hz;             /* clock frequency */
457         int     tick;           /* micro-seconds per hz tick */
458         int     spare;
459         int     stathz;         /* statistics clock frequency */
460         int     profhz;         /* profiling clock frequency */
461 };
462
463 /* These macros are also in time.h. */
464 #ifndef CLOCK_REALTIME
465 #define CLOCK_REALTIME  0
466 #define CLOCK_VIRTUAL   1
467 #define CLOCK_PROF      2
468 #define CLOCK_MONOTONIC 4
469 #define CLOCK_UPTIME    5               /* FreeBSD-specific. */
470 #define CLOCK_UPTIME_PRECISE    7       /* FreeBSD-specific. */
471 #define CLOCK_UPTIME_FAST       8       /* FreeBSD-specific. */
472 #define CLOCK_REALTIME_PRECISE  9       /* FreeBSD-specific. */
473 #define CLOCK_REALTIME_FAST     10      /* FreeBSD-specific. */
474 #define CLOCK_MONOTONIC_PRECISE 11      /* FreeBSD-specific. */
475 #define CLOCK_MONOTONIC_FAST    12      /* FreeBSD-specific. */
476 #define CLOCK_SECOND    13              /* FreeBSD-specific. */
477 #define CLOCK_THREAD_CPUTIME_ID 14
478 #define CLOCK_PROCESS_CPUTIME_ID        15
479 #endif
480
481 #ifndef TIMER_ABSTIME
482 #define TIMER_RELTIME   0x0     /* relative timer */
483 #define TIMER_ABSTIME   0x1     /* absolute timer */
484 #endif
485
486 #if __BSD_VISIBLE
487 #define CPUCLOCK_WHICH_PID      0
488 #define CPUCLOCK_WHICH_TID      1
489 #endif
490
491 #ifdef _KERNEL
492
493 /*
494  * Kernel to clock driver interface.
495  */
496 void    inittodr(time_t base);
497 void    resettodr(void);
498
499 extern volatile time_t  time_second;
500 extern volatile time_t  time_uptime;
501 extern struct bintime tc_tick_bt;
502 extern sbintime_t tc_tick_sbt;
503 extern struct bintime tick_bt;
504 extern sbintime_t tick_sbt;
505 extern int tc_precexp;
506 extern int tc_timepercentage;
507 extern struct bintime bt_timethreshold;
508 extern struct bintime bt_tickthreshold;
509 extern sbintime_t sbt_timethreshold;
510 extern sbintime_t sbt_tickthreshold;
511
512 extern volatile int rtc_generation;
513
514 /*
515  * Functions for looking at our clock: [get]{bin,nano,micro}[up]time()
516  *
517  * Functions without the "get" prefix returns the best timestamp
518  * we can produce in the given format.
519  *
520  * "bin"   == struct bintime  == seconds + 64 bit fraction of seconds.
521  * "nano"  == struct timespec == seconds + nanoseconds.
522  * "micro" == struct timeval  == seconds + microseconds.
523  *
524  * Functions containing "up" returns time relative to boot and
525  * should be used for calculating time intervals.
526  *
527  * Functions without "up" returns UTC time.
528  *
529  * Functions with the "get" prefix returns a less precise result
530  * much faster than the functions without "get" prefix and should
531  * be used where a precision of 1/hz seconds is acceptable or where
532  * performance is priority. (NB: "precision", _not_ "resolution" !)
533  */
534
535 void    binuptime(struct bintime *bt);
536 void    nanouptime(struct timespec *tsp);
537 void    microuptime(struct timeval *tvp);
538
539 static __inline sbintime_t
540 sbinuptime(void)
541 {
542         struct bintime _bt;
543
544         binuptime(&_bt);
545         return (bttosbt(_bt));
546 }
547
548 void    bintime(struct bintime *bt);
549 void    nanotime(struct timespec *tsp);
550 void    microtime(struct timeval *tvp);
551
552 void    getbinuptime(struct bintime *bt);
553 void    getnanouptime(struct timespec *tsp);
554 void    getmicrouptime(struct timeval *tvp);
555
556 static __inline sbintime_t
557 getsbinuptime(void)
558 {
559         struct bintime _bt;
560
561         getbinuptime(&_bt);
562         return (bttosbt(_bt));
563 }
564
565 void    getbintime(struct bintime *bt);
566 void    getnanotime(struct timespec *tsp);
567 void    getmicrotime(struct timeval *tvp);
568
569 void    getboottime(struct timeval *boottime);
570 void    getboottimebin(struct bintime *boottimebin);
571
572 /* Other functions */
573 int     itimerdecr(struct itimerval *itp, int usec);
574 int     itimerfix(struct timeval *tv);
575 int     ppsratecheck(struct timeval *, int *, int);
576 int     ratecheck(struct timeval *, const struct timeval *);
577 void    timevaladd(struct timeval *t1, const struct timeval *t2);
578 void    timevalsub(struct timeval *t1, const struct timeval *t2);
579 int     tvtohz(struct timeval *tv);
580
581 #define TC_DEFAULTPERC          5
582
583 #define BT2FREQ(bt)                                                     \
584         (((uint64_t)0x8000000000000000 + ((bt)->frac >> 2)) /           \
585             ((bt)->frac >> 1))
586
587 #define SBT2FREQ(sbt)   ((SBT_1S + ((sbt) >> 1)) / (sbt))
588
589 #define FREQ2BT(freq, bt)                                               \
590 {                                                                       \
591         (bt)->sec = 0;                                                  \
592         (bt)->frac = ((uint64_t)0x8000000000000000  / (freq)) << 1;     \
593 }
594
595 #define TIMESEL(sbt, sbt2)                                              \
596         (((sbt2) >= sbt_timethreshold) ?                                \
597             ((*(sbt) = getsbinuptime()), 1) : ((*(sbt) = sbinuptime()), 0))
598
599 #else /* !_KERNEL */
600 #include <time.h>
601
602 #include <sys/cdefs.h>
603 #include <sys/select.h>
604
605 __BEGIN_DECLS
606 int     setitimer(int, const struct itimerval *, struct itimerval *);
607 int     utimes(const char *, const struct timeval *);
608
609 #if __BSD_VISIBLE
610 int     adjtime(const struct timeval *, struct timeval *);
611 int     clock_getcpuclockid2(id_t, int, clockid_t *);
612 int     futimes(int, const struct timeval *);
613 int     futimesat(int, const char *, const struct timeval [2]);
614 int     lutimes(const char *, const struct timeval *);
615 int     settimeofday(const struct timeval *, const struct timezone *);
616 #endif
617
618 #if __XSI_VISIBLE
619 int     getitimer(int, struct itimerval *);
620 int     gettimeofday(struct timeval *, struct timezone *);
621 #endif
622
623 __END_DECLS
624
625 #endif /* !_KERNEL */
626
627 #endif /* !_SYS_TIME_H_ */