1 /******************************************************************************
4 * VCPU initialisation, query, and hotplug.
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to
8 * deal in the Software without restriction, including without limitation the
9 * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
10 * sell copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
19 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
22 * DEALINGS IN THE SOFTWARE.
24 * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
27 #ifndef __XEN_PUBLIC_VCPU_H__
28 #define __XEN_PUBLIC_VCPU_H__
33 * Prototype for this hypercall is:
34 * long vcpu_op(int cmd, unsigned int vcpuid, void *extra_args)
35 * @cmd == VCPUOP_??? (VCPU operation).
36 * @vcpuid == VCPU to operate on.
37 * @extra_args == Operation-specific extra arguments (NULL if none).
41 * Initialise a VCPU. Each VCPU can be initialised only once. A
42 * newly-initialised VCPU will not run until it is brought up by VCPUOP_up.
44 * @extra_arg == pointer to vcpu_guest_context structure containing initial
47 #define VCPUOP_initialise 0
50 * Bring up a VCPU. This makes the VCPU runnable. This operation will fail
51 * if the VCPU has not been initialised (VCPUOP_initialise).
56 * Bring down a VCPU (i.e., make it non-runnable).
57 * There are a few caveats that callers should observe:
58 * 1. This operation may return, and VCPU_is_up may return false, before the
59 * VCPU stops running (i.e., the command is asynchronous). It is a good
60 * idea to ensure that the VCPU has entered a non-critical loop before
61 * bringing it down. Alternatively, this operation is guaranteed
62 * synchronous if invoked by the VCPU itself.
63 * 2. After a VCPU is initialised, there is currently no way to drop all its
64 * references to domain memory. Even a VCPU that is down still holds
65 * memory references via its pagetable base pointer and GDT. It is good
66 * practise to move a VCPU onto an 'idle' or default page table, LDT and
67 * GDT before bringing it down.
71 /* Returns 1 if the given VCPU is up. */
72 #define VCPUOP_is_up 3
75 * Return information about the state and running time of a VCPU.
76 * @extra_arg == pointer to vcpu_runstate_info structure.
78 #define VCPUOP_get_runstate_info 4
79 struct vcpu_runstate_info {
80 /* VCPU's current state (RUNSTATE_*). */
82 /* When was current state entered (system time, ns)? */
83 uint64_t state_entry_time;
85 * Time spent in each RUNSTATE_* (ns). The sum of these times is
86 * guaranteed not to drift from system time.
90 typedef struct vcpu_runstate_info vcpu_runstate_info_t;
91 DEFINE_XEN_GUEST_HANDLE(vcpu_runstate_info_t);
93 /* VCPU is currently running on a physical CPU. */
94 #define RUNSTATE_running 0
96 /* VCPU is runnable, but not currently scheduled on any physical CPU. */
97 #define RUNSTATE_runnable 1
99 /* VCPU is blocked (a.k.a. idle). It is therefore not runnable. */
100 #define RUNSTATE_blocked 2
103 * VCPU is not runnable, but it is not blocked.
104 * This is a 'catch all' state for things like hotplug and pauses by the
105 * system administrator (or for critical sections in the hypervisor).
106 * RUNSTATE_blocked dominates this state (it is the preferred state).
108 #define RUNSTATE_offline 3
111 * Register a shared memory area from which the guest may obtain its own
112 * runstate information without needing to execute a hypercall.
114 * 1. The registered address may be virtual or physical or guest handle,
115 * depending on the platform. Virtual address or guest handle should be
116 * registered on x86 systems.
117 * 2. Only one shared area may be registered per VCPU. The shared area is
118 * updated by the hypervisor each time the VCPU is scheduled. Thus
119 * runstate.state will always be RUNSTATE_running and
120 * runstate.state_entry_time will indicate the system time at which the
121 * VCPU was last scheduled to run.
122 * @extra_arg == pointer to vcpu_register_runstate_memory_area structure.
124 #define VCPUOP_register_runstate_memory_area 5
125 struct vcpu_register_runstate_memory_area {
127 XEN_GUEST_HANDLE(vcpu_runstate_info_t) h;
128 struct vcpu_runstate_info *v;
132 typedef struct vcpu_register_runstate_memory_area vcpu_register_runstate_memory_area_t;
133 DEFINE_XEN_GUEST_HANDLE(vcpu_register_runstate_memory_area_t);
136 * Set or stop a VCPU's periodic timer. Every VCPU has one periodic timer
137 * which can be set via these commands. Periods smaller than one millisecond
138 * may not be supported.
140 #define VCPUOP_set_periodic_timer 6 /* arg == vcpu_set_periodic_timer_t */
141 #define VCPUOP_stop_periodic_timer 7 /* arg == NULL */
142 struct vcpu_set_periodic_timer {
145 typedef struct vcpu_set_periodic_timer vcpu_set_periodic_timer_t;
146 DEFINE_XEN_GUEST_HANDLE(vcpu_set_periodic_timer_t);
149 * Set or stop a VCPU's single-shot timer. Every VCPU has one single-shot
150 * timer which can be set via these commands.
152 #define VCPUOP_set_singleshot_timer 8 /* arg == vcpu_set_singleshot_timer_t */
153 #define VCPUOP_stop_singleshot_timer 9 /* arg == NULL */
154 struct vcpu_set_singleshot_timer {
155 uint64_t timeout_abs_ns; /* Absolute system time value in nanoseconds. */
156 uint32_t flags; /* VCPU_SSHOTTMR_??? */
158 typedef struct vcpu_set_singleshot_timer vcpu_set_singleshot_timer_t;
159 DEFINE_XEN_GUEST_HANDLE(vcpu_set_singleshot_timer_t);
161 /* Flags to VCPUOP_set_singleshot_timer. */
162 /* Require the timeout to be in the future (return -ETIME if it's passed). */
163 #define _VCPU_SSHOTTMR_future (0)
164 #define VCPU_SSHOTTMR_future (1U << _VCPU_SSHOTTMR_future)
167 * Register a memory location in the guest address space for the
168 * vcpu_info structure. This allows the guest to place the vcpu_info
169 * structure in a convenient place, such as in a per-cpu data area.
170 * The pointer need not be page aligned, but the structure must not
171 * cross a page boundary.
173 * This may be called only once per vcpu.
175 #define VCPUOP_register_vcpu_info 10 /* arg == vcpu_register_vcpu_info_t */
176 struct vcpu_register_vcpu_info {
177 uint64_t mfn; /* mfn of page to place vcpu_info */
178 uint32_t offset; /* offset within page */
179 uint32_t rsvd; /* unused */
181 typedef struct vcpu_register_vcpu_info vcpu_register_vcpu_info_t;
182 DEFINE_XEN_GUEST_HANDLE(vcpu_register_vcpu_info_t);
184 /* Send an NMI to the specified VCPU. @extra_arg == NULL. */
185 #define VCPUOP_send_nmi 11
188 * Get the physical ID information for a pinned vcpu's underlying physical
189 * processor. The physical ID informmation is architecture-specific.
190 * On x86: id[31:0]=apic_id, id[63:32]=acpi_id.
191 * This command returns -EINVAL if it is not a valid operation for this VCPU.
193 #define VCPUOP_get_physid 12 /* arg == vcpu_get_physid_t */
194 struct vcpu_get_physid {
197 typedef struct vcpu_get_physid vcpu_get_physid_t;
198 DEFINE_XEN_GUEST_HANDLE(vcpu_get_physid_t);
199 #define xen_vcpu_physid_to_x86_apicid(physid) ((uint32_t)(physid))
200 #define xen_vcpu_physid_to_x86_acpiid(physid) ((uint32_t)((physid) >> 32))
203 * Register a memory location to get a secondary copy of the vcpu time
204 * parameters. The master copy still exists as part of the vcpu shared
205 * memory area, and this secondary copy is updated whenever the master copy
206 * is updated (and using the same versioning scheme for synchronisation).
208 * The intent is that this copy may be mapped (RO) into userspace so
209 * that usermode can compute system time using the time info and the
210 * tsc. Usermode will see an array of vcpu_time_info structures, one
211 * for each vcpu, and choose the right one by an existing mechanism
212 * which allows it to get the current vcpu number (such as via a
213 * segment limit). It can then apply the normal algorithm to compute
214 * system time from the tsc.
216 * @extra_arg == pointer to vcpu_register_time_info_memory_area structure.
218 #define VCPUOP_register_vcpu_time_memory_area 13
219 DEFINE_XEN_GUEST_HANDLE(vcpu_time_info_t);
220 struct vcpu_register_time_memory_area {
222 XEN_GUEST_HANDLE(vcpu_time_info_t) h;
223 struct vcpu_time_info *v;
227 typedef struct vcpu_register_time_memory_area vcpu_register_time_memory_area_t;
228 DEFINE_XEN_GUEST_HANDLE(vcpu_register_time_memory_area_t);
230 #endif /* __XEN_PUBLIC_VCPU_H__ */
235 * c-file-style: "BSD"
238 * indent-tabs-mode: nil