3 # Copyright (c) 1994-2009 Poul-Henning Kamp.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
9 # 1. Redistributions of source code must retain the above copyright
10 # notice, this list of conditions and the following disclaimer.
11 # 2. Redistributions in binary form must reproduce the above copyright
12 # notice, this list of conditions and the following disclaimer in the
13 # documentation and/or other materials provided with the distribution.
15 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 if [ `uname -m` = "i386" -o `uname -m` = "amd64" ] ; then
35 TARGET_PART=`df / | sed '
44 FREEBSD_PART=`sed -n \
46 -e '/[ ]\/freebsd[ ]/!d' \
50 # Calculate a suggested gpart command
51 TARGET_DISK=`expr ${TARGET_PART} : '\(.*\)s[12]a$' || true`
52 TARGET_SLICE=`expr ${TARGET_PART} : '.*s\([12]\)a$' || true`
53 GPART_SUGGESTION="gpart set -a active -i $TARGET_SLICE /dev/$TARGET_DISK"
54 unset TARGET_DISK TARGET_SLICE
58 GPART_SUGGESTION=unknown
62 # Relative to /freebsd
71 #SRCCONF="SRCCONF=/usr/src/src.conf"
75 ncpu=`sysctl -n kern.smp.cpus`
76 if [ $ncpu -gt 1 ] ; then
83 PKG_DIR=/usr/ports/packages/All
85 # Remotely mounted distfiles
86 # REMOTEDISTFILES=fs:/rdonly/distfiles
89 #FTP_PROXY=http://127.0.0.1:3128/
90 #HTTP_PROXY=http://127.0.0.1:3128/
91 #export FTP_PROXY HTTP_PROXY
96 PORTS_OPTS="BATCH=YES A4=yes"
104 SBMNT="/mnt.sysbuild"
112 before_ports_chroot() (
121 #######################################################################
122 # -P is a pretty neat way to clean junk out from your ports dist-files:
124 # mkdir /freebsd/ports/distfiles.old
125 # mv /freebsd/ports/distfiles/* /freebsd/ports/distfiles.old
126 # sh sysbuild.sh -c $yourconfig -P /freebsd/ports/distfiles.old
127 # rm -rf /freebsd/ports/distfiles.old
129 # Unfortunately bsd.ports.mk does not attempt to use a hard-link so
130 # while this runs you need diskspace for both your old and your "new"
133 #######################################################################
137 echo "Usage: $0 [-b/-k/-w] [-c config_file]"
138 echo " -b suppress builds (both kernel and world)"
139 echo " -k suppress buildkernel"
140 echo " -w suppress buildworld"
141 echo " -p used cached packages"
142 echo " -P <dir> prefetch ports"
143 echo " -c specify config file"
148 #######################################################################
149 #######################################################################
151 if [ ! -f $0 ] ; then
152 echo "Must be able to access self ($0)" 1>&2
156 if grep -q 'Magic String: 0`0nQT40W%l,CX&' $0 ; then
159 echo "self ($0) does not contain magic string" 1>&2
163 #######################################################################
169 set `cat /tmp/_sb_log`
171 echo "$1 $TX" > /tmp/_sb_log
172 DT=`expr $TX - $1 || true`
173 DL=`expr $TX - $2 || true`
174 echo -n "### `date +%H:%M:%S`"
175 printf " ### %5d ### %5d ### %s\n" $DT $DL "$a"
178 #######################################################################
181 make $* WITH="${PORTS_WITH}" WITHOUT="${PORTS_WITHOUT}" ${PORTS_OPTS}
188 if [ "x$t" = "x." ] ; then
190 true > /tmp/_.plist.tdone
191 echo 'digraph {' > /tmp/_.plist.dot
193 if grep -q "^$t\$" /tmp/_.plist.tdone ; then
196 echo "$t" >> /tmp/_.plist.tdone
199 if [ ! -d $d ] ; then
200 echo "Missing port $d ($t)" 1>&2
203 d=`cd /usr/ports && cd $d && /bin/pwd`
204 if [ ! -f $d/Makefile ] ; then
205 echo "Missing port $d" 1>&2
208 if [ "x$t" != "x." ] ; then
209 echo "\"$t\" -> \"$d\"" >> /tmp/_.plist.dot
211 if grep -q "^$d\$" /tmp/_.plist ; then
213 elif grep -q "^$d\$" /tmp/_.plist.tdone ; then
219 for a in `ports_make -V _UNIFIED_DEPENDS`
221 x=`expr "$a" : '.*:\(.*\)'`
226 echo "$d" >> /tmp/_.plist
229 if [ "x$t" = "x." ] ; then
230 echo '}' >> /tmp/_.plist.dot
236 ports_recurse . $PORTS_WE_WANT
238 if [ "x${PKG_DIR}" != "x" ] ; then
242 pd=`cd /usr/ports && /bin/pwd`
243 # Now build & install them
244 for p in `cat /tmp/_.plist`
247 t=`echo $p | sed "s,${pd},,"`
248 pn=`cd $p && ports_make package-name`
250 if [ "x`basename $p`" == "xpkg" ] ; then
251 log_it "Very Special: $t ($pn)"
255 ports_make clean all install
256 ) > _.$b 2>&1 < /dev/null
260 if pkg info $pn > /dev/null 2>&1 ; then
261 log_it "Already installed: $t ($pn)"
265 if [ "x${PKG_DIR}" != "x" -a -f ${PKG_DIR}/$pn.txz ] ; then
266 if [ "x$use_pkg" = "x-p" ] ; then
267 log_it "Install $t ($pn)"
270 pkg add ${PKG_DIR}/$pn.txz || true
271 ) > _.$b 2>&1 < /dev/null
276 miss=`(cd $p ; ports_make missing) || true`
278 if [ "x${miss}" != "x" ] ; then
279 log_it "NB: MISSING for $p:" $miss
282 log_it "build $pn ($p)"
287 if ports_make install ; then
288 if [ "x${PKG_DIR}" != "x" ] ; then
296 ) > _.$b 2>&1 < /dev/null
304 true > /${ldir}/_.prefetch
305 echo "Building /tmp/_.plist" >> /${ldir}/_.prefetch
307 ports_recurse . $PORTS_WE_WANT
309 echo "Completed /tmp/_.plist" >> /${ldir}/_.prefetch
310 # Now checksump/fetch them
311 for p in `cat /tmp/_.plist`
316 if ports_make checksum ; then
317 rm -f /${ldir}/_.prefetch.$b
318 echo "OK $p" >> /${ldir}/_.prefetch
322 ports_make checksum || true
324 if ports_make checksum > /dev/null 2>&1 ; then
325 rm -f /${ldir}/_.prefetch.$b
326 echo "OK $p" >> /${ldir}/_.prefetch
328 echo "BAD $p" >> /${ldir}/_.prefetch
330 ) > /${ldir}/_.prefetch.$b 2>&1
332 echo "Done" >> /${ldir}/_.prefetch
336 #######################################################################
345 args=`getopt bc:hkpP:w $*`
346 if [ $? -ne 0 ] ; then
363 if [ ! -f "$c_arg" ] ; then
364 echo "Cannot read $c_arg" 1>&2
399 #######################################################################
401 if [ "x$1" = "xchroot_script" ] ; then
413 if [ "x$1" = "xfinal_chroot" ] ; then
418 if [ $# -gt 0 ] ; then
419 echo "$0: Extraneous arguments supplied"
423 #######################################################################
426 echo $T0 $T0 > /tmp/_sb_log
428 [ ! -d ${SBMNT} ] && mkdir -p ${SBMNT}
430 if $do_prefetch ; then
431 rm -rf /tmp/sysbuild/ports
432 mkdir -p /tmp/sysbuild/ports
433 ln -s ${distfile_cache} /tmp/sysbuild/ports/distfiles
434 export PORTS_OPTS=CD_MOUNTPTS=/tmp/sysbuild
439 log_it Unmount everything
442 umount /freebsd/distfiles || true
443 umount ${SBMNT}/freebsd/distfiles || true
444 umount ${FREEBSD_PART} || true
445 umount ${SBMNT}/freebsd || true
446 umount ${SBMNT}/dev || true
447 umount ${SBMNT} || true
448 umount /dev/${TARGET_PART} || true
451 log_it Prepare running image
453 mount ${FREEBSD_PART} /freebsd
455 #######################################################################
457 if [ ! -d /freebsd/${PORTS_PATH} ] ; then
458 echo PORTS_PATH does not exist 1>&2
462 if [ ! -d /freebsd/${SRC_PATH} ] ; then
463 echo SRC_PATH does not exist 1>&2
467 log_it TARGET_PART $TARGET_PART
471 ln -s /freebsd/${PORTS_PATH} /usr/ports
474 ln -s /freebsd/${SRC_PATH} /usr/src
477 if [ "x${OBJ_PATH}" != "x" ] ; then
479 (cd /freebsd && mkdir -p ${OBJ_PATH} && ln -s ${OBJ_PATH} /usr/obj)
486 #######################################################################
488 for i in ${PORTS_WE_WANT}
492 if [ ! -d $i ] ; then
493 echo "Port $i not found" 1>&2
499 #export PORTS_WE_WANT
502 #######################################################################
504 log_it Prepare destination partition
505 newfs -t -E -O2 -U /dev/${TARGET_PART} > /dev/null
506 mount /dev/${TARGET_PART} ${SBMNT}
507 mkdir -p ${SBMNT}/dev
508 mount -t devfs devfs ${SBMNT}/dev
510 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
511 rm -rf /freebsd/${PORTS_PATH}/distfiles
512 ln -s /freebsd/distfiles /freebsd/${PORTS_PATH}/distfiles
513 mkdir -p /freebsd/distfiles
514 mount ${REMOTEDISTFILES} /freebsd/distfiles
517 log_it copy ports config files
518 (cd / ; find var/db/ports -print | cpio -dumpv ${SBMNT} > /dev/null 2>&1)
520 log_it "Start prefetch of ports distfiles"
521 ports_prefetch ${SBMNT} &
527 make ${JARG} -s buildworld ${SRCCONF} > ${SBMNT}/_.bw 2>&1
535 make ${JARG} -s buildkernel KERNCONF=$KERNCONF > ${SBMNT}/_.bk 2>&1
541 (cd /usr/src && make ${JARG} installworld DESTDIR=${SBMNT} ${SRCCONF} ) \
545 (cd /usr/src/etc && make -m /usr/src/share/mk distribution DESTDIR=${SBMNT} ${SRCCONF} ) \
546 > ${SBMNT}/_.dist 2>&1
549 (cd /usr/src && make ${JARG} installkernel DESTDIR=${SBMNT} KERNCONF=$KERNCONF ) \
552 if [ "x${OBJ_PATH}" != "x" ] ; then
553 rmdir ${SBMNT}/usr/obj
554 ( cd /freebsd && mkdir -p ${OBJ_PATH} && ln -s ${OBJ_PATH} ${SBMNT}/usr/obj )
557 log_it Wait for ports prefetch
558 log_it "(Tail ${SBMNT}/_.prefetch for progress)"
561 log_it Move filesystems
563 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
564 umount /freebsd/distfiles
566 umount ${FREEBSD_PART} || true
567 mkdir -p ${SBMNT}/freebsd
568 mount ${FREEBSD_PART} ${SBMNT}/freebsd
569 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
570 mount ${REMOTEDISTFILES} ${SBMNT}/freebsd/distfiles
573 rm -rf ${SBMNT}/usr/ports || true
574 ln -s /freebsd/${PORTS_PATH} ${SBMNT}/usr/ports
576 rm -rf ${SBMNT}/usr/src || true
577 ln -s /freebsd/${SRC_PATH} ${SBMNT}/usr/src
579 log_it Build and install ports
581 # Make sure fetching will work in the chroot
582 if [ -f /etc/resolv.conf ] ; then
583 log_it copy resolv.conf
584 cp /etc/resolv.conf ${SBMNT}/etc
585 chflags schg ${SBMNT}/etc/resolv.conf
588 if [ -f /etc/localtime ] ; then
589 log_it copy localtime
590 cp /etc/localtime ${SBMNT}/etc
593 log_it ldconfig in chroot
594 chroot ${SBMNT} sh /etc/rc.d/ldconfig start
602 sed "/[ ]\/[ ]/s;^[^ ]*[ ];/dev/${TARGET_PART} ;" \
603 /etc/fstab > ${SBMNT}/etc/fstab
608 cp /tmp/_sb_log ${SBMNT}/tmp
610 if [ "x$c_arg" != "x" ] ; then
611 cp $c_arg ${SBMNT}/root
612 chroot ${SBMNT} sh /root/$0 -c /root/`basename $c_arg` $use_pkg chroot_script
614 chroot ${SBMNT} sh /root/$0 $use_pkg chroot_script
616 cp ${SBMNT}/tmp/_sb_log /tmp
618 log_it create all mountpoints
619 grep -v '^[ ]*#' ${SBMNT}/etc/fstab |
625 if [ "x$SERCONS" != "xfalse" ] ; then
626 log_it serial console
627 echo " -h" > ${SBMNT}/boot.config
628 sed -i "" -e /ttyd0/s/off/on/ ${SBMNT}/etc/ttys
629 sed -i "" -e /ttyu0/s/off/on/ ${SBMNT}/etc/ttys
630 sed -i "" -e '/^ttyv[0-8]/s/ on/ off/' ${SBMNT}/etc/ttys
633 log_it move dist config files "(expect warnings)"
636 mkdir root/configfiles_dist
637 find ${CONFIGFILES} -print | cpio -dumpv root/configfiles_dist
640 log_it copy live config files
641 (cd / && find ${CONFIGFILES} -print | cpio -dumpv ${SBMNT})
646 cp /tmp/_sb_log ${SBMNT}/tmp
647 if [ "x$c_arg" != "x" ] ; then
648 chroot ${SBMNT} sh /root/$0 -c /root/`basename $c_arg` final_chroot
650 chroot ${SBMNT} sh /root/$0 final_chroot
652 cp ${SBMNT}/tmp/_sb_log /tmp
653 log_it "Check these messages (if any):"
654 grep '^Stop' ${SBMNT}/_* || true
656 echo "Now you probably want to:"
657 echo " $GPART_SUGGESTION"
658 echo " shutdown -r now"