3 # Copyright (c) 1994-2009 Poul-Henning Kamp.
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions
9 # 1. Redistributions of source code must retain the above copyright
10 # notice, this list of conditions and the following disclaimer.
11 # 2. Redistributions in binary form must reproduce the above copyright
12 # notice, this list of conditions and the following disclaimer in the
13 # documentation and/or other materials provided with the distribution.
15 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 if [ `uname -m` = "i386" -o `uname -m` = "amd64" ] ; then
35 TARGET_PART=`df / | sed '
44 FREEBSD_PART=`sed -n \
46 -e '/[ ]\/freebsd[ ]/!d' \
50 # Calculate a suggested gpart command
51 TARGET_DISK=`expr ${TARGET_PART} : '\(.*\)s[12]a$' || true`
52 TARGET_SLICE=`expr ${TARGET_PART} : '.*s\([12]\)a$' || true`
53 GPART_SUGGESTION="gpart set -a active -i $TARGET_SLICE /dev/$TARGET_DISK"
54 unset TARGET_DISK TARGET_SLICE
58 GPART_SUGGESTION=unknown
62 # Relative to /freebsd
71 #SRCCONF="SRCCONF=/usr/src/src.conf"
75 ncpu=`sysctl -n kern.smp.cpus`
76 if [ $ncpu -gt 1 ] ; then
83 # Remotely mounted distfiles
84 # REMOTEDISTFILES=fs:/rdonly/distfiles
87 #FTP_PROXY=http://127.0.0.1:3128/
88 #HTTP_PROXY=http://127.0.0.1:3128/
89 #export FTP_PROXY HTTP_PROXY
94 PORTS_OPTS="BATCH=YES A4=yes"
107 before_ports_chroot() (
116 #######################################################################
117 # -P is a pretty neat way to clean junk out from your ports dist-files:
119 # mkdir /freebsd/ports/distfiles.old
120 # mv /freebsd/ports/distfiles/* /freebsd/ports/distfiles.old
121 # sh sysbuild.sh -c $yourconfig -P /freebsd/ports/distfiles.old
122 # rm -rf /freebsd/ports/distfiles.old
124 # Unfortunately bsd.ports.mk does not attempt to use a hard-link so
125 # while this runs you need diskspace for both your old and your "new"
128 #######################################################################
132 echo "Usage: $0 [-b/-k/-w] [-c config_file]"
133 echo " -b suppress builds (both kernel and world)"
134 echo " -k suppress buildkernel"
135 echo " -w suppress buildworld"
136 echo " -p used cached packages"
137 echo " -P <dir> prefetch ports"
138 echo " -c specify config file"
143 #######################################################################
144 #######################################################################
146 if [ ! -f $0 ] ; then
147 echo "Must be able to access self ($0)" 1>&2
151 if grep -q 'Magic String: 0`0nQT40W%l,CX&' $0 ; then
154 echo "self ($0) does not contain magic string" 1>&2
158 #######################################################################
164 set `cat /tmp/_sb_log`
166 echo "$1 $TX" > /tmp/_sb_log
167 DT=`expr $TX - $1 || true`
168 DL=`expr $TX - $2 || true`
169 echo -n "### `date +%H:%M:%S`"
170 printf " ### %5d ### %5d ### %s\n" $DT $DL "$a"
173 #######################################################################
179 if [ "x$t" = "x." ] ; then
181 true > /tmp/_.plist.tdone
182 echo 'digraph {' > /tmp/_.plist.dot
184 if grep -q "^$t\$" /tmp/_.plist.tdone ; then
187 echo "$t" >> /tmp/_.plist.tdone
190 if [ ! -d $d ] ; then
191 echo "Missing port $d" 1>&2
194 if [ ! -f $d/Makefile ] ; then
195 echo "Missing port $d" 1>&2
198 if [ "x$t" != "x." ] ; then
199 echo "\"$t\" -> \"$d\"" >> /tmp/_.plist.dot
201 if grep -q "^$d\$" /tmp/_.plist ; then
203 elif grep -q "^$d\$" /tmp/_.plist.tdone ; then
208 ports_recurse $d `make -V _DEPEND_DIRS ${PORTS_OPTS}`
210 echo "$d" >> /tmp/_.plist
213 if [ "x$t" = "x." ] ; then
214 echo '}' >> /tmp/_.plist.dot
220 ports_recurse . $PORTS_WE_WANT
222 if [ "x${PKG_DIR}" != "x" ] ; then
226 # Now build & install them
227 for p in `cat /tmp/_.plist`
230 t=`echo $p | sed 's,/usr/ports/,,'`
231 pn=`cd $p && make package-name`
233 if [ "x`basename $p`" == "xpkg" ] ; then
234 log_it "Very Special: $t ($pn)"
238 make clean all install ${PORTS_OPTS}
239 ) > _.$b 2>&1 < /dev/null
243 if pkg info $pn > /dev/null 2>&1 ; then
244 log_it "Already installed: $t ($pn)"
248 if [ "x${PKG_DIR}" != "x" -a -f ${PKG_DIR}/$pn.txz ] ; then
249 if [ "x$use_pkg" = "x-p" ] ; then
250 log_it "Install $t ($pn)"
253 pkg add ${PKG_DIR}/$pn.txz || true
254 ) > _.$b 2>&1 < /dev/null
259 miss=`(cd $p ; make missing ${PORTS_OPTS}) || true`
261 if [ "x${miss}" != "x" ] ; then
262 log_it "MISSING for $p:" $miss
266 log_it "build $pn ($p)"
270 make clean ${PORTS_OPTS}
271 if make install ${PORTS_OPTS} ; then
272 if [ "x${PKG_DIR}" != "x" ] ; then
273 make package ${PORTS_OPTS}
279 ) > _.$b 2>&1 < /dev/null
287 true > /${ldir}/_.prefetch
288 echo "Building /tmp/_.plist" >> /${ldir}/_.prefetch
290 ports_recurse . $PORTS_WE_WANT
292 echo "Completed /tmp/_.plist" >> /${ldir}/_.prefetch
293 # Now checksump/fetch them
294 for p in `cat /tmp/_.plist`
299 if make checksum $PORTS_OPTS ; then
300 rm -f /${ldir}/_.prefetch.$b
301 echo "OK $p" >> /${ldir}/_.prefetch
305 make checksum $PORTS_OPTS || true
307 if make checksum $PORTS_OPTS > /dev/null 2>&1 ; then
308 rm -f /${ldir}/_.prefetch.$b
309 echo "OK $p" >> /${ldir}/_.prefetch
311 echo "BAD $p" >> /${ldir}/_.prefetch
313 ) > /${ldir}/_.prefetch.$b 2>&1
315 echo "Done" >> /${ldir}/_.prefetch
319 #######################################################################
328 args=`getopt bc:hkpP:w $*`
329 if [ $? -ne 0 ] ; then
346 if [ ! -f "$c_arg" ] ; then
347 echo "Cannot read $c_arg" 1>&2
382 #######################################################################
384 if [ "x$1" = "xchroot_script" ] ; then
396 if [ "x$1" = "xfinal_chroot" ] ; then
401 if [ $# -gt 0 ] ; then
402 echo "$0: Extraneous arguments supplied"
406 #######################################################################
409 echo $T0 $T0 > /tmp/_sb_log
411 [ ! -d ${SBMNT} ] && mkdir -p ${SBMNT}
413 if $do_prefetch ; then
414 rm -rf /tmp/sysbuild/ports
415 mkdir -p /tmp/sysbuild/ports
416 ln -s ${distfile_cache} /tmp/sysbuild/ports/distfiles
417 export PORTS_OPTS=CD_MOUNTPTS=/tmp/sysbuild
422 log_it Unmount everything
425 umount /freebsd/distfiles || true
426 umount ${SBMNT}/freebsd/distfiles || true
427 umount ${FREEBSD_PART} || true
428 umount ${SBMNT}/freebsd || true
429 umount ${SBMNT}/dev || true
430 umount ${SBMNT} || true
431 umount /dev/${TARGET_PART} || true
434 log_it Prepare running image
436 mount ${FREEBSD_PART} /freebsd
438 #######################################################################
440 if [ ! -d /freebsd/${PORTS_PATH} ] ; then
441 echo PORTS_PATH does not exist 1>&2
445 if [ ! -d /freebsd/${SRC_PATH} ] ; then
446 echo SRC_PATH does not exist 1>&2
450 log_it TARGET_PART $TARGET_PART
454 ln -s /freebsd/${PORTS_PATH} /usr/ports
457 ln -s /freebsd/${SRC_PATH} /usr/src
460 if [ "x${OBJ_PATH}" != "x" ] ; then
462 mkdir -p /freebsd/${OBJ_PATH}
463 ln -s /freebsd/${OBJ_PATH} /usr/obj
470 #######################################################################
472 for i in ${PORTS_WE_WANT}
474 if [ ! -d $i ] ; then
475 echo "Port $i not found" 1>&2
483 #######################################################################
485 log_it Prepare destination partition
486 newfs -t -E -O2 -U /dev/${TARGET_PART} > /dev/null
487 mount /dev/${TARGET_PART} ${SBMNT}
488 mkdir -p ${SBMNT}/dev
489 mount -t devfs devfs ${SBMNT}/dev
491 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
492 rm -rf /freebsd/${PORTS_PATH}/distfiles
493 ln -s /freebsd/distfiles /freebsd/${PORTS_PATH}/distfiles
494 mkdir -p /freebsd/distfiles
495 mount ${REMOTEDISTFILES} /freebsd/distfiles
498 log_it copy ports config files
499 (cd / ; find var/db/ports -print | cpio -dumpv ${SBMNT} > /dev/null 2>&1)
501 log_it "Start prefetch of ports distfiles"
502 ports_prefetch ${SBMNT} &
508 make ${JARG} -s buildworld ${SRCCONF} > ${SBMNT}/_.bw 2>&1
516 make ${JARG} -s buildkernel KERNCONF=$KERNCONF > ${SBMNT}/_.bk 2>&1
522 (cd /usr/src && make ${JARG} installworld DESTDIR=${SBMNT} ${SRCCONF} ) \
526 (cd /usr/src/etc && make -m /usr/src/share/mk distribution DESTDIR=${SBMNT} ${SRCCONF} ) \
527 > ${SBMNT}/_.dist 2>&1
530 (cd /usr/src && make ${JARG} installkernel DESTDIR=${SBMNT} KERNCONF=$KERNCONF ) \
533 if [ "x${OBJ_PATH}" != "x" ] ; then
534 rmdir ${SBMNT}/usr/obj
535 ln -s /freebsd/${OBJ_PATH} ${SBMNT}/usr/obj
538 log_it Wait for ports prefetch
539 log_it "(Tail ${SBMNT}/_.prefetch for progress)"
542 log_it Move filesystems
544 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
545 umount /freebsd/distfiles
547 umount ${FREEBSD_PART} || true
548 mkdir -p ${SBMNT}/freebsd
549 mount ${FREEBSD_PART} ${SBMNT}/freebsd
550 if [ "x${REMOTEDISTFILES}" != "x" ] ; then
551 mount ${REMOTEDISTFILES} ${SBMNT}/freebsd/distfiles
554 rm -rf ${SBMNT}/usr/ports || true
555 ln -s /freebsd/${PORTS_PATH} ${SBMNT}/usr/ports
557 rm -rf ${SBMNT}/usr/src || true
558 ln -s /freebsd/${SRC_PATH} ${SBMNT}/usr/src
560 log_it Build and install ports
562 # Make sure fetching will work in the chroot
563 if [ -f /etc/resolv.conf ] ; then
564 log_it copy resolv.conf
565 cp /etc/resolv.conf ${SBMNT}/etc
566 chflags schg ${SBMNT}/etc/resolv.conf
569 if [ -f /etc/localtime ] ; then
570 log_it copy localtime
571 cp /etc/localtime ${SBMNT}/etc
574 log_it ldconfig in chroot
575 chroot ${SBMNT} sh /etc/rc.d/ldconfig start
583 sed "/[ ]\/[ ]/s;^[^ ]*[ ];/dev/${TARGET_PART} ;" \
584 /etc/fstab > ${SBMNT}/etc/fstab
589 cp /tmp/_sb_log ${SBMNT}/tmp
591 if [ "x$c_arg" != "x" ] ; then
592 cp $c_arg ${SBMNT}/root
593 chroot ${SBMNT} sh /root/$0 -c /root/`basename $c_arg` $use_pkg chroot_script
595 chroot ${SBMNT} sh /root/$0 $use_pkg chroot_script
597 cp ${SBMNT}/tmp/_sb_log /tmp
599 log_it create all mountpoints
600 grep -v '^[ ]*#' ${SBMNT}/etc/fstab |
606 if [ "x$SERCONS" != "xfalse" ] ; then
607 log_it serial console
608 echo " -h" > ${SBMNT}/boot.config
609 sed -i "" -e /ttyd0/s/off/on/ ${SBMNT}/etc/ttys
610 sed -i "" -e /ttyu0/s/off/on/ ${SBMNT}/etc/ttys
611 sed -i "" -e '/^ttyv[0-8]/s/ on/ off/' ${SBMNT}/etc/ttys
614 log_it move dist config files "(expect warnings)"
617 mkdir root/configfiles_dist
618 find ${CONFIGFILES} -print | cpio -dumpv root/configfiles_dist
621 log_it copy live config files
622 (cd / && find ${CONFIGFILES} -print | cpio -dumpv ${SBMNT})
627 cp /tmp/_sb_log ${SBMNT}/tmp
628 if [ "x$c_arg" != "x" ] ; then
629 chroot ${SBMNT} sh /root/$0 -c /root/`basename $c_arg` final_chroot
631 chroot ${SBMNT} sh /root/$0 final_chroot
633 cp ${SBMNT}/tmp/_sb_log /tmp
634 log_it "Check these messages (if any):"
635 grep '^Stop' ${SBMNT}/_* || true
637 echo "Now you probably want to:"
638 echo " $GPART_SUGGESTION"
639 echo " shutdown -r now"