2 * Include file for PCMCIA user process interface
4 *-------------------------------------------------------------------------
7 * SPDX-License-Identifier: BSD-3-Clause
9 * Copyright (c) 1995 Andrew McRae. All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. The name of the author may not be used to endorse or promote products
20 * derived from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #ifndef _PCCARD_CARDINFO_H_
36 #define _PCCARD_CARDINFO_H_
39 #include <sys/types.h>
41 #include <sys/ioccom.h>
43 #define PIOCGSTATE _IOR('P', 1, struct slotstate) /* Get slot state */
44 #define PIOCGMEM _IOWR('P', 2, struct mem_desc) /* Get memory map */
45 #define PIOCSMEM _IOW('P', 3, struct mem_desc) /* Set memory map */
46 #define PIOCGIO _IOWR('P', 4, struct io_desc) /* Get I/O map */
47 #define PIOCSIO _IOW('P', 5, struct io_desc) /* Set I/O map */
48 #define PIOCSDRV _IOWR('P', 6, struct dev_desc) /* Set driver */
49 #define PIOCRWFLAG _IOW('P', 7, int) /* Set flags for drv use */
50 #define PIOCRWMEM _IOWR('P', 8, unsigned long) /* Set mem for drv use */
51 #define PIOCSPOW _IOW('P', 9, struct power) /* Set power structure */
52 #define PIOCSVIR _IOW('P', 10, int) /* Virtual insert/remove */
53 #define PIOCSBEEP _IOW('P', 11, int) /* Select Beep */
54 #define PIOCSRESOURCE _IOWR('P', 12, struct pccard_resource) /* get resource info */
58 #define PIOCGREG _IOWR('P',100, struct pcic_reg) /* get reg */
59 #define PIOCSREG _IOW('P', 101, struct pcic_reg) /* Set reg */
62 * Slot states for PIOCGSTATE
64 * Here's a state diagram of all the possible states:
70 * resume +----------+ power x 0 +----------+
71 * ------->| inactive |<--------------| filled |
72 * / +----------+ +----------+
74 * nil <--------- \ insert or | | suspend or
75 * suspend \ power x 1 | | eject
78 * ----------->| empty |
81 * Note, the above diagram is for the state. On suspend, the laststate
82 * gets set to suspend to tell pccardd what happened. Also the nil state
83 * means that when the no state change has happened. Note: if you eject
84 * while suspended in the inactive state, you will return to the
85 * empty state if you do not insert a new card and to the inactive state
86 * if you do insert a new card.
88 * Some might argue that inactive should be sticky forever and
89 * eject/insert shouldn't take it out of that state. They might be
90 * right. On the other hand, some would argue that eject resets all
91 * state. They might be right. They both can't be right. The above
92 * represents a reasonable compromise between the two.
94 * Some bridges allow one to query to see if the card was changed while
95 * we were suspended. Others do not. We make no use of this functionality
98 enum cardstate { noslot, empty, suspend, filled, inactive };
101 * Descriptor structure for memory map.
104 int window; /* Memory map window number (0-4) */
105 int flags; /* Flags - see below */
106 caddr_t start; /* System memory start */
107 int size; /* Size of memory area */
108 unsigned long card; /* Card memory address */
111 #define MDF_16BITS 0x01 /* Memory is 16 bits wide */
112 #define MDF_ZEROWS 0x02 /* Set no wait states for memory */
113 #define MDF_WS0 0x04 /* Wait state flags */
115 #define MDF_ATTR 0x10 /* Memory is attribute memory */
116 #define MDF_WP 0x20 /* Write protect memory */
117 #define MDF_ACTIVE 0x40 /* Context active (read-only) */
120 * Descriptor structure for I/O map
123 int window; /* I/O map number (0-1) */
124 int flags; /* Flags - see below */
125 int start; /* I/O port start */
126 int size; /* Number of port addresses */
129 #define IODF_WS 0x01 /* Set wait states for 16 bit I/O access */
130 #define IODF_16BIT 0x02 /* I/O access are 16 bit */
131 #define IODF_CS16 0x04 /* Allow card selection of 16 bit access */
132 #define IODF_ZEROWS 0x08 /* No wait states for 8 bit I/O */
133 #define IODF_ACTIVE 0x10 /* Context active (read-only) */
136 * Device descriptor for allocation of driver.
138 #define DEV_MISC_LEN 36
139 #define DEV_MAX_CIS_LEN 40
141 char name[16]; /* Driver name */
142 int unit; /* Driver unit number */
143 unsigned long mem; /* Memory address of driver */
144 int memsize; /* Memory size (if used) */
145 int iobase; /* base of I/O ports */
146 int iosize; /* Length of I/O ports */
147 int irqmask; /* Interrupt number(s) to allocate */
148 int flags; /* Device flags */
149 uint8_t misc[DEV_MISC_LEN]; /* For any random info */
150 uint8_t manufstr[DEV_MAX_CIS_LEN];
151 uint8_t versstr[DEV_MAX_CIS_LEN];
152 uint8_t cis3str[DEV_MAX_CIS_LEN];
153 uint8_t cis4str[DEV_MAX_CIS_LEN];
154 uint32_t manufacturer; /* Manufacturer ID */
155 uint32_t product; /* Product ID */
156 uint32_t prodext; /* Product ID (extended) */
158 #define DEV_DESC_HAS_SIZE 1
166 * Slot information. Used to read current status of slot.
169 enum cardstate state; /* Current state of slot */
170 enum cardstate laststate; /* Previous state of slot */
171 int maxmem; /* Max allowed memory windows */
172 int maxio; /* Max allowed I/O windows */
173 int irqs; /* Bitmap of IRQs allowed */
174 int flags; /* Capability flags */
178 * The power values are in volts * 10, e.g. 5V is 50, 3.3V is 33.
186 * The PC-Card resource IOC_GET_RESOURCE_RANGE
188 struct pccard_resource {
193 u_long resource_addr;
198 * Other system limits
201 #define NUM_MEM_WINDOWS 10
202 #define NUM_IO_WINDOWS 6
203 #define CARD_DEVICE "/dev/card%d" /* String for snprintf */
204 #define PCCARD_MEMSIZE (4*1024)
206 #endif /* !_PCCARD_CARDINFO_H_ */