2 # Copyright (c) 2016 Spectra Logic Corp
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
8 # 1. Redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 # notice, this list of conditions and the following disclaimer in the
12 # documentation and/or other materials provided with the distribution.
14 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 atf_test_case bad_namespace
29 bad_namespace_head() {
30 atf_set "descr" "Can't set attributes for nonexistent namespaces"
32 bad_namespace_body() {
35 atf_check -s not-exit:0 -e match:"Invalid argument" \
36 setextattr badnamespace myattr X foo
37 atf_check -s not-exit:0 -e match:"Invalid argument" \
38 lsextattr -q badnamespace foo
43 atf_set "descr" "Set and get attribute values in hexadecimal"
48 atf_check -s exit:0 -o empty setextattr user myattr XYZ foo
49 atf_check -s exit:0 -o inline:"58 59 5a\n" \
50 getextattr -qx user myattr foo
53 atf_test_case hex_nonascii
55 atf_set "descr" "Get binary attribute values in hexadecimal"
60 BINSTUFF=`echo $'\x20\x30\x40\x55\x66\x70\x81\xa2\xb3\xee\xff'`
61 atf_check -s exit:0 -o empty setextattr user myattr "$BINSTUFF" foo
62 getextattr user myattr foo
63 atf_check -s exit:0 -o inline:"20 30 40 55 66 70 81 a2 b3 ee ff\n" \
64 getextattr -qx user myattr foo
67 atf_test_case long_name
69 atf_set "descr" "A maximum length attribute name"
73 # https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=208965
74 atf_expect_fail "BUG 208965 extattr(2) doesn't allow maxlen attr names"
76 ATTRNAME=`jot -b X -s "" 255 0`
78 atf_check -s exit:0 -o empty setextattr user $ATTRNAME myvalue foo
79 atf_check -s exit:0 -o inline:"${ATTRNAME}\n" lsextattr -q user foo
80 atf_check -s exit:0 -o inline:"myvalue\n" \
81 getextattr -q user ${ATTRNAME} foo
82 atf_check -s exit:0 -o empty rmextattr user ${ATTRNAME} foo
83 atf_check -s exit:0 -o empty lsextattr -q user foo
88 atf_set "descr" "Loud (non -q) output for each command"
93 # setextattr(8) and friends print hard tabs. Use printf to convert
94 # them to spaces before checking the output.
95 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
96 atf_check -s exit:0 -o inline:"foo myattr" \
97 printf "%s %s" $(lsextattr user foo)
98 atf_check -s exit:0 -o inline:"foo myvalue" \
99 printf "%s %s" $(getextattr user myattr foo)
100 atf_check -s exit:0 -o empty rmextattr user myattr foo
101 atf_check -s exit:0 -o inline:"foo" printf %s $(lsextattr user foo)
104 atf_test_case noattrs
106 atf_set "descr" "A file with no extended attributes"
111 atf_check -s exit:0 -o empty lsextattr -q user foo
114 atf_test_case nonexistent_file
115 nonexistent_file_head() {
116 atf_set "descr" "A file that does not exist"
118 nonexistent_file_body() {
120 atf_check -s exit:1 -e match:"No such file or directory" \
122 atf_check -s exit:1 -e match:"No such file or directory" \
123 setextattr user myattr myvalue foo
124 atf_check -s exit:1 -e match:"No such file or directory" \
125 getextattr user myattr foo
126 atf_check -s exit:1 -e match:"No such file or directory" \
127 rmextattr user myattr foo
132 atf_set "descr" "NUL-terminate an attribute value"
137 atf_check -s exit:0 -o empty setextattr -n user myattr myvalue foo
138 atf_check -s exit:0 -o inline:"myvalue\0\n" getextattr -q user myattr foo
141 atf_test_case one_user_attr
142 one_user_attr_head() {
143 atf_set "descr" "A file with one extended attribute"
145 one_user_attr_body() {
148 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
149 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
150 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
151 atf_check -s exit:0 -o empty rmextattr user myattr foo
152 atf_check -s exit:0 -o empty lsextattr -q user foo
155 atf_test_case one_system_attr
156 one_system_attr_head() {
157 atf_set "descr" "A file with one extended attribute"
158 atf_set "require.user" "root"
160 one_system_attr_body() {
163 atf_check -s exit:0 -o empty setextattr system myattr myvalue foo
164 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q system foo
165 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q system myattr foo
166 atf_check -s exit:0 -o empty rmextattr system myattr foo
167 atf_check -s exit:0 -o empty lsextattr -q system foo
172 atf_set "descr" "Set attribute value from stdin"
176 dd if=/dev/random of=infile bs=1k count=8
178 setextattr -i user myattr foo < infile || atf_fail "setextattr failed"
179 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
180 getextattr -qq user myattr foo > outfile || atf_fail "getextattr failed"
181 atf_check -s exit:0 cmp -s infile outfile
184 atf_test_case stringify
186 atf_set "descr" "Stringify the output of getextattr"
191 atf_check -s exit:0 -o empty setextattr user myattr "my value" foo
192 atf_check -s exit:0 -o inline:"\"my\\\040value\"\n" \
193 getextattr -qs user myattr foo
196 atf_test_case symlink
198 atf_set "descr" "A symlink to an ordinary file"
204 atf_check -s exit:0 -o empty setextattr user myattr myvalue foolink
205 atf_check -s exit:0 -o inline:"myvalue\n" \
206 getextattr -q user myattr foolink
207 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
210 atf_test_case symlink_nofollow
211 symlink_nofollow_head() {
212 atf_set "descr" "Operating directly on a symlink"
214 symlink_nofollow_body() {
218 # Check that with -h we can operate directly on the link
219 atf_check -s exit:0 -o empty setextattr -h user myattr myvalue foolink
220 atf_check -s exit:0 -o inline:"myvalue\n" \
221 getextattr -qh user myattr foolink
222 atf_check -s exit:1 -e match:"Attribute not found" \
223 getextattr user myattr foolink
224 atf_check -s exit:1 -e match:"Attribute not found" \
225 getextattr user myattr foo
227 # Check that with -h we cannot operate on the destination file
228 atf_check -s exit:0 -o empty setextattr user otherattr othervalue foo
229 atf_check -s exit:1 getextattr -qh user otherattr foolink
232 atf_test_case system_and_user_attrs
233 system_and_user_attrs_head() {
234 atf_set "descr" "A file with both system and user extended attributes"
235 atf_set "require.user" "root"
237 system_and_user_attrs_body() {
240 atf_check -s exit:0 -o empty setextattr user userattr userval foo
241 atf_check -s exit:0 -o empty setextattr system sysattr sysval foo
242 atf_check -s exit:0 -o inline:"userattr\n" lsextattr -q user foo
243 atf_check -s exit:0 -o inline:"sysattr\n" lsextattr -q system foo
245 atf_check -s exit:0 -o inline:"userval\n" getextattr -q user userattr foo
246 atf_check -s exit:0 -o inline:"sysval\n" getextattr -q system sysattr foo
247 atf_check -s exit:0 -o empty rmextattr user userattr foo
248 atf_check -s exit:0 -o empty rmextattr system sysattr foo
249 atf_check -s exit:0 -o empty lsextattr -q user foo
250 atf_check -s exit:0 -o empty lsextattr -q system foo
253 atf_test_case two_files
255 atf_set "descr" "Manipulate two files"
260 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo bar
261 atf_check -s exit:0 -o inline:"foo\tmyattr\nbar\tmyattr\n" \
262 lsextattr user foo bar
263 atf_check -s exit:0 \
264 -o inline:"foo\tmyvalue\nbar\tmyvalue\n" \
265 getextattr user myattr foo bar
266 atf_check -s exit:0 -o empty rmextattr user myattr foo bar
267 atf_check -s exit:0 -o empty lsextattr -q user foo bar
270 atf_test_case two_files_force
271 two_files_force_head() {
272 atf_set "descr" "Manipulate two files. The first does not exist"
274 two_files_force_body() {
277 atf_check -s exit:1 -e match:"No such file or directory" \
278 setextattr user myattr myvalue foo bar
279 atf_check -s exit:0 -e ignore setextattr -f user myattr myvalue foo bar
280 atf_check -s exit:1 -e match:"No such file or directory" \
281 lsextattr user foo bar
282 atf_check -s exit:0 -e ignore -o inline:"bar\tmyattr\n" \
283 lsextattr -f user foo bar
284 atf_check -s exit:1 -e match:"No such file or directory" \
285 getextattr user myattr foo bar
286 atf_check -s exit:0 -e ignore \
287 -o inline:"bar\tmyvalue\n" \
288 getextattr -f user myattr foo bar
289 atf_check -s exit:1 -e match:"No such file or directory" \
290 rmextattr user myattr foo bar
291 atf_check -s exit:0 -e ignore \
292 rmextattr -f user myattr foo bar
293 atf_check -s exit:0 -o empty lsextattr -q user bar
296 atf_test_case two_user_attrs
297 two_user_attrs_head() {
298 atf_set "descr" "A file with two extended attributes"
300 two_user_attrs_body() {
303 atf_check -s exit:0 -o empty setextattr user myattr1 myvalue1 foo
304 atf_check -s exit:0 -o empty setextattr user myattr2 myvalue2 foo
305 # lsextattr could return the attributes in any order, so we must be
306 # careful how we compare them.
307 raw_output=`lsextattr -q user foo` || atf_fail "lsextattr failed"
308 tabless_output=`printf "%s %s" ${raw_output}`
309 if [ "myattr1 myattr2" != "${tabless_output}" -a \
310 "myattr2 myattr1" != "${tabless_output}" ]; then
311 atf_fail "lsextattr printed ${tabless_output}"
313 atf_check -s exit:0 -o inline:"myvalue1\n" getextattr -q user myattr1 foo
314 atf_check -s exit:0 -o inline:"myvalue2\n" getextattr -q user myattr2 foo
315 atf_check -s exit:0 -o empty rmextattr user myattr2 foo
316 atf_check -s exit:0 -o empty rmextattr user myattr1 foo
317 atf_check -s exit:0 -o empty lsextattr -q user foo
320 atf_test_case unprivileged_user_cannot_set_system_attr
321 unprivileged_user_cannot_set_system_attr_head() {
322 atf_set "descr" "Unprivileged users can't set system attributes"
323 atf_set "require.user" "unprivileged"
325 unprivileged_user_cannot_set_system_attr_body() {
328 atf_check -s exit:1 -e match:"Operation not permitted" \
329 setextattr system myattr myvalue foo
333 atf_init_test_cases() {
334 atf_add_test_case bad_namespace
335 atf_add_test_case hex
336 atf_add_test_case hex_nonascii
337 atf_add_test_case long_name
338 atf_add_test_case loud
339 atf_add_test_case noattrs
340 atf_add_test_case nonexistent_file
341 atf_add_test_case null
342 atf_add_test_case symlink_nofollow
343 atf_add_test_case one_user_attr
344 atf_add_test_case one_system_attr
345 atf_add_test_case stdin
346 atf_add_test_case stringify
347 atf_add_test_case symlink
348 atf_add_test_case symlink_nofollow
349 atf_add_test_case system_and_user_attrs
350 atf_add_test_case two_files
351 atf_add_test_case two_files_force
352 atf_add_test_case two_user_attrs
353 atf_add_test_case unprivileged_user_cannot_set_system_attr
357 case `df -T . | tail -n 1 | cut -wf 2` in
358 "ufs") ;; # UFS is fine
359 "zfs") ;; # ZFS is fine
360 "tmpfs") atf_skip "tmpfs does not support extended attributes";;