2 # Copyright (c) 2016 Spectra Logic Corp
5 # Redistribution and use in source and binary forms, with or without
6 # modification, are permitted provided that the following conditions
8 # 1. Redistributions of source code must retain the above copyright
9 # notice, this list of conditions and the following disclaimer.
10 # 2. Redistributions in binary form must reproduce the above copyright
11 # notice, this list of conditions and the following disclaimer in the
12 # documentation and/or other materials provided with the distribution.
14 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 atf_test_case bad_namespace
29 bad_namespace_head() {
30 atf_set "descr" "Can't set attributes for nonexistent namespaces"
32 bad_namespace_body() {
35 atf_check -s not-exit:0 -e match:"Invalid argument" \
36 setextattr badnamespace myattr X foo
37 atf_check -s not-exit:0 -e match:"Invalid argument" \
38 lsextattr -q badnamespace foo
43 atf_set "descr" "Set and get attribute values in hexadecimal"
48 atf_check -s exit:0 -o empty setextattr user myattr XYZ foo
49 atf_check -s exit:0 -o inline:"58 59 5a\n" \
50 getextattr -qx user myattr foo
53 atf_test_case hex_nonascii
55 atf_set "descr" "Get binary attribute values in hexadecimal"
60 BINSTUFF=`echo $'\x20\x30\x40\x55\x66\x70\x81\xa2\xb3\xee\xff'`
61 atf_check -s exit:0 -o empty setextattr user myattr "$BINSTUFF" foo
62 getextattr user myattr foo
63 atf_check -s exit:0 -o inline:"20 30 40 55 66 70 81 a2 b3 ee ff\n" \
64 getextattr -qx user myattr foo
67 atf_test_case long_name
69 atf_set "descr" "A maximum length attribute name"
74 if ! NAME_MAX=$(getconf NAME_MAX .); then
75 atf_skip "Filesystem not reporting NAME_MAX; skipping testcase"
78 ATTRNAME=`jot -b X -s "" $NAME_MAX 0`
80 atf_check -s exit:0 -o empty setextattr user $ATTRNAME myvalue foo
81 atf_check -s exit:0 -o inline:"${ATTRNAME}\n" lsextattr -q user foo
82 atf_check -s exit:0 -o inline:"myvalue\n" \
83 getextattr -q user ${ATTRNAME} foo
84 atf_check -s exit:0 -o empty rmextattr user ${ATTRNAME} foo
85 atf_check -s exit:0 -o empty lsextattr -q user foo
90 atf_set "descr" "Loud (non -q) output for each command"
95 # setextattr(8) and friends print hard tabs. Use printf to convert
96 # them to spaces before checking the output.
97 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
98 atf_check -s exit:0 -o inline:"foo myattr" \
99 printf "%s %s" $(lsextattr user foo)
100 atf_check -s exit:0 -o inline:"foo myvalue" \
101 printf "%s %s" $(getextattr user myattr foo)
102 atf_check -s exit:0 -o empty rmextattr user myattr foo
103 atf_check -s exit:0 -o inline:"foo" printf %s $(lsextattr user foo)
106 atf_test_case noattrs
108 atf_set "descr" "A file with no extended attributes"
113 atf_check -s exit:0 -o empty lsextattr -q user foo
116 atf_test_case nonexistent_file
117 nonexistent_file_head() {
118 atf_set "descr" "A file that does not exist"
120 nonexistent_file_body() {
122 atf_check -s exit:1 -e match:"No such file or directory" \
124 atf_check -s exit:1 -e match:"No such file or directory" \
125 setextattr user myattr myvalue foo
126 atf_check -s exit:1 -e match:"No such file or directory" \
127 getextattr user myattr foo
128 atf_check -s exit:1 -e match:"No such file or directory" \
129 rmextattr user myattr foo
134 atf_set "descr" "NUL-terminate an attribute value"
139 atf_check -s exit:0 -o empty setextattr -n user myattr myvalue foo
140 atf_check -s exit:0 -o inline:"myvalue\0\n" getextattr -q user myattr foo
143 atf_test_case one_user_attr
144 one_user_attr_head() {
145 atf_set "descr" "A file with one extended attribute"
147 one_user_attr_body() {
150 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo
151 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
152 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
153 atf_check -s exit:0 -o empty rmextattr user myattr foo
154 atf_check -s exit:0 -o empty lsextattr -q user foo
157 atf_test_case one_system_attr
158 one_system_attr_head() {
159 atf_set "descr" "A file with one extended attribute"
160 atf_set "require.user" "root"
162 one_system_attr_body() {
165 atf_check -s exit:0 -o empty setextattr system myattr myvalue foo
166 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q system foo
167 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q system myattr foo
168 atf_check -s exit:0 -o empty rmextattr system myattr foo
169 atf_check -s exit:0 -o empty lsextattr -q system foo
174 atf_set "descr" "Set attribute value from stdin"
178 dd if=/dev/random of=infile bs=1k count=8
180 setextattr -i user myattr foo < infile || atf_fail "setextattr failed"
181 atf_check -s exit:0 -o inline:"myattr\n" lsextattr -q user foo
182 getextattr -qq user myattr foo > outfile || atf_fail "getextattr failed"
183 atf_check -s exit:0 cmp -s infile outfile
186 atf_test_case stringify
188 atf_set "descr" "Stringify the output of getextattr"
193 atf_check -s exit:0 -o empty setextattr user myattr "my value" foo
194 atf_check -s exit:0 -o inline:"\"my\\\040value\"\n" \
195 getextattr -qs user myattr foo
198 atf_test_case symlink
200 atf_set "descr" "A symlink to an ordinary file"
206 atf_check -s exit:0 -o empty setextattr user myattr myvalue foolink
207 atf_check -s exit:0 -o inline:"myvalue\n" \
208 getextattr -q user myattr foolink
209 atf_check -s exit:0 -o inline:"myvalue\n" getextattr -q user myattr foo
212 atf_test_case symlink_nofollow
213 symlink_nofollow_head() {
214 atf_set "descr" "Operating directly on a symlink"
216 symlink_nofollow_body() {
220 # Check that with -h we can operate directly on the link
221 atf_check -s exit:0 -o empty setextattr -h user myattr myvalue foolink
222 atf_check -s exit:0 -o inline:"myvalue\n" \
223 getextattr -qh user myattr foolink
224 atf_check -s exit:1 -e match:"Attribute not found" \
225 getextattr user myattr foolink
226 atf_check -s exit:1 -e match:"Attribute not found" \
227 getextattr user myattr foo
229 # Check that with -h we cannot operate on the destination file
230 atf_check -s exit:0 -o empty setextattr user otherattr othervalue foo
231 atf_check -s exit:1 getextattr -qh user otherattr foolink
234 atf_test_case system_and_user_attrs
235 system_and_user_attrs_head() {
236 atf_set "descr" "A file with both system and user extended attributes"
237 atf_set "require.user" "root"
239 system_and_user_attrs_body() {
242 atf_check -s exit:0 -o empty setextattr user userattr userval foo
243 atf_check -s exit:0 -o empty setextattr system sysattr sysval foo
244 atf_check -s exit:0 -o inline:"userattr\n" lsextattr -q user foo
245 atf_check -s exit:0 -o inline:"sysattr\n" lsextattr -q system foo
247 atf_check -s exit:0 -o inline:"userval\n" getextattr -q user userattr foo
248 atf_check -s exit:0 -o inline:"sysval\n" getextattr -q system sysattr foo
249 atf_check -s exit:0 -o empty rmextattr user userattr foo
250 atf_check -s exit:0 -o empty rmextattr system sysattr foo
251 atf_check -s exit:0 -o empty lsextattr -q user foo
252 atf_check -s exit:0 -o empty lsextattr -q system foo
255 atf_test_case two_files
257 atf_set "descr" "Manipulate two files"
262 atf_check -s exit:0 -o empty setextattr user myattr myvalue foo bar
263 atf_check -s exit:0 -o inline:"foo\tmyattr\nbar\tmyattr\n" \
264 lsextattr user foo bar
265 atf_check -s exit:0 \
266 -o inline:"foo\tmyvalue\nbar\tmyvalue\n" \
267 getextattr user myattr foo bar
268 atf_check -s exit:0 -o empty rmextattr user myattr foo bar
269 atf_check -s exit:0 -o empty lsextattr -q user foo bar
272 atf_test_case two_files_force
273 two_files_force_head() {
274 atf_set "descr" "Manipulate two files. The first does not exist"
276 two_files_force_body() {
279 atf_check -s exit:1 -e match:"No such file or directory" \
280 setextattr user myattr myvalue foo bar
281 atf_check -s exit:0 -e ignore setextattr -f user myattr myvalue foo bar
282 atf_check -s exit:1 -e match:"No such file or directory" \
283 lsextattr user foo bar
284 atf_check -s exit:0 -e ignore -o inline:"bar\tmyattr\n" \
285 lsextattr -f user foo bar
286 atf_check -s exit:1 -e match:"No such file or directory" \
287 getextattr user myattr foo bar
288 atf_check -s exit:0 -e ignore \
289 -o inline:"bar\tmyvalue\n" \
290 getextattr -f user myattr foo bar
291 atf_check -s exit:1 -e match:"No such file or directory" \
292 rmextattr user myattr foo bar
293 atf_check -s exit:0 -e ignore \
294 rmextattr -f user myattr foo bar
295 atf_check -s exit:0 -o empty lsextattr -q user bar
298 atf_test_case two_user_attrs
299 two_user_attrs_head() {
300 atf_set "descr" "A file with two extended attributes"
302 two_user_attrs_body() {
305 atf_check -s exit:0 -o empty setextattr user myattr1 myvalue1 foo
306 atf_check -s exit:0 -o empty setextattr user myattr2 myvalue2 foo
307 # lsextattr could return the attributes in any order, so we must be
308 # careful how we compare them.
309 raw_output=`lsextattr -q user foo` || atf_fail "lsextattr failed"
310 tabless_output=`printf "%s %s" ${raw_output}`
311 if [ "myattr1 myattr2" != "${tabless_output}" -a \
312 "myattr2 myattr1" != "${tabless_output}" ]; then
313 atf_fail "lsextattr printed ${tabless_output}"
315 atf_check -s exit:0 -o inline:"myvalue1\n" getextattr -q user myattr1 foo
316 atf_check -s exit:0 -o inline:"myvalue2\n" getextattr -q user myattr2 foo
317 atf_check -s exit:0 -o empty rmextattr user myattr2 foo
318 atf_check -s exit:0 -o empty rmextattr user myattr1 foo
319 atf_check -s exit:0 -o empty lsextattr -q user foo
322 atf_test_case unprivileged_user_cannot_set_system_attr
323 unprivileged_user_cannot_set_system_attr_head() {
324 atf_set "descr" "Unprivileged users can't set system attributes"
325 atf_set "require.user" "unprivileged"
327 unprivileged_user_cannot_set_system_attr_body() {
330 atf_check -s exit:1 -e match:"Operation not permitted" \
331 setextattr system myattr myvalue foo
335 atf_init_test_cases() {
336 atf_add_test_case bad_namespace
337 atf_add_test_case hex
338 atf_add_test_case hex_nonascii
339 atf_add_test_case long_name
340 atf_add_test_case loud
341 atf_add_test_case noattrs
342 atf_add_test_case nonexistent_file
343 atf_add_test_case null
344 atf_add_test_case symlink_nofollow
345 atf_add_test_case one_user_attr
346 atf_add_test_case one_system_attr
347 atf_add_test_case stdin
348 atf_add_test_case stringify
349 atf_add_test_case symlink
350 atf_add_test_case symlink_nofollow
351 atf_add_test_case system_and_user_attrs
352 atf_add_test_case two_files
353 atf_add_test_case two_files_force
354 atf_add_test_case two_user_attrs
355 atf_add_test_case unprivileged_user_cannot_set_system_attr
359 case `df -T . | tail -n 1 | cut -wf 2` in
361 case `dumpfs . | head -1 | awk -F'[()]' '{print $2}'` in
362 "UFS1") atf_skip "UFS1 is not supported by this test";;
363 "UFS2") ;; # UFS2 is fine
365 "zfs") ;; # ZFS is fine
366 "tmpfs") atf_skip "tmpfs does not support extended attributes";;