2 * Copyright (c) 2008 Yahoo!, Inc.
4 * Written by: John Baldwin <jhb@FreeBSD.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of the author nor the names of any co-contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 #include <sys/cdefs.h>
34 #include <sys/param.h>
35 #include <sys/errno.h>
46 #define STANDALONE_STATE "ONLINE"
49 format_stripe(char *buf, size_t buflen, U32 stripe)
52 humanize_number(buf, buflen, stripe * 512, "", HN_AUTOSCALE,
57 display_stripe_map(const char *label, U32 StripeMap)
63 printf("%s: ", label);
64 for (i = 0; StripeMap != 0; i++, StripeMap >>= 1)
66 format_stripe(stripe, sizeof(stripe), 1 << i);
76 show_adapter(int ac, char **av)
78 CONFIG_PAGE_MANUFACTURING_0 *man0;
79 CONFIG_PAGE_IOC_2 *ioc2;
80 CONFIG_PAGE_IOC_6 *ioc6;
85 warnx("show adapter: extra arguments");
89 fd = mpt_open(mpt_unit);
96 man0 = mpt_read_man_page(fd, 0, NULL);
99 warn("Failed to get controller info");
103 if (man0->Header.PageLength < sizeof(*man0) / 4) {
104 warnx("Invalid controller info");
109 printf("mpt%d Adapter:\n", mpt_unit);
110 printf(" Board Name: %.16s\n", man0->BoardName);
111 printf(" Board Assembly: %.16s\n", man0->BoardAssembly);
112 printf(" Chip Name: %.16s\n", man0->ChipName);
113 printf(" Chip Revision: %.16s\n", man0->ChipRevision);
117 ioc2 = mpt_read_ioc_page(fd, 2, &IOCStatus);
119 printf(" RAID Levels:");
121 if (ioc2->CapabilitiesFlags &
122 MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT) {
126 if (ioc2->CapabilitiesFlags &
127 MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT) {
128 printf("%s RAID1", comma ? "," : "");
131 if (ioc2->CapabilitiesFlags &
132 MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT) {
133 printf("%s RAID1E", comma ? "," : "");
136 if (ioc2->CapabilitiesFlags &
137 MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT) {
138 printf("%s RAID5", comma ? "," : "");
141 if (ioc2->CapabilitiesFlags &
142 MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT) {
143 printf("%s RAID6", comma ? "," : "");
146 if (ioc2->CapabilitiesFlags &
147 MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT) {
148 printf("%s RAID10", comma ? "," : "");
151 if (ioc2->CapabilitiesFlags &
152 MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT) {
153 printf("%s RAID50", comma ? "," : "");
160 } else if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
161 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
162 warnx("mpt_read_ioc_page(2): %s", mpt_ioc_status(IOCStatus));
164 ioc6 = mpt_read_ioc_page(fd, 6, &IOCStatus);
166 display_stripe_map(" RAID0 Stripes",
167 ioc6->SupportedStripeSizeMapIS);
168 display_stripe_map(" RAID1E Stripes",
169 ioc6->SupportedStripeSizeMapIME);
170 printf(" RAID0 Drives/Vol: %u", ioc6->MinDrivesIS);
171 if (ioc6->MinDrivesIS != ioc6->MaxDrivesIS)
172 printf("-%u", ioc6->MaxDrivesIS);
174 printf(" RAID1 Drives/Vol: %u", ioc6->MinDrivesIM);
175 if (ioc6->MinDrivesIM != ioc6->MaxDrivesIM)
176 printf("-%u", ioc6->MaxDrivesIM);
178 printf("RAID1E Drives/Vol: %u", ioc6->MinDrivesIME);
179 if (ioc6->MinDrivesIME != ioc6->MaxDrivesIME)
180 printf("-%u", ioc6->MaxDrivesIME);
183 } else if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
184 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
185 warnx("mpt_read_ioc_page(6): %s", mpt_ioc_status(IOCStatus));
187 /* TODO: Add an ioctl to fetch IOC_FACTS and print firmware version. */
193 MPT_COMMAND(show, adapter, show_adapter);
196 print_vol(CONFIG_PAGE_RAID_VOL_0 *info, int state_len)
199 const char *level, *state;
200 char buf[6], stripe[5];
202 size = ((uint64_t)info->MaxLBAHigh << 32) | info->MaxLBA;
203 humanize_number(buf, sizeof(buf), (size + 1) * 512, "", HN_AUTOSCALE,
204 HN_B | HN_NOSPACE | HN_DECIMAL);
205 if (info->VolumeType == MPI_RAID_VOL_TYPE_IM)
208 format_stripe(stripe, sizeof(stripe), info->StripeSize);
209 level = mpt_raid_level(info->VolumeType);
210 state = mpt_volstate(info->VolumeStatus.State);
212 printf("(%6s) %-8s %6s %-*s", buf, level, stripe, state_len,
214 else if (stripe[0] != '\0')
215 printf("(%s) %s %s %s", buf, level, stripe, state);
217 printf("(%s) %s %s", buf, level, state);
221 print_pd(CONFIG_PAGE_RAID_PHYS_DISK_0 *info, int state_len, int location)
223 const char *inq, *state;
226 humanize_number(buf, sizeof(buf), ((uint64_t)info->MaxLBA + 1) * 512,
227 "", HN_AUTOSCALE, HN_B | HN_NOSPACE |HN_DECIMAL);
228 state = mpt_pdstate(info);
230 printf("(%6s) %-*s", buf, state_len, state);
232 printf("(%s) %s", buf, state);
233 inq = mpt_pd_inq_string(info);
238 printf(" bus %d id %d", info->PhysDiskBus, info->PhysDiskID);
242 print_standalone(struct mpt_standalone_disk *disk, int state_len, int location)
246 humanize_number(buf, sizeof(buf), (disk->maxlba + 1) * 512,
247 "", HN_AUTOSCALE, HN_B | HN_NOSPACE |HN_DECIMAL);
249 printf("(%6s) %-*s", buf, state_len, STANDALONE_STATE);
251 printf("(%s) %s", buf, STANDALONE_STATE);
252 if (disk->inqstring[0] != '\0')
253 printf(" %s", disk->inqstring);
256 printf(" bus %d id %d", disk->bus, disk->target);
260 print_spare_pools(U8 HotSparePool)
264 if (HotSparePool == 0) {
268 for (i = 0; HotSparePool != 0; i++) {
269 if (HotSparePool & 1) {
271 if (HotSparePool == 1)
280 show_config(int ac, char **av)
282 CONFIG_PAGE_IOC_2 *ioc2;
283 CONFIG_PAGE_IOC_2_RAID_VOL *vol;
284 CONFIG_PAGE_IOC_5 *ioc5;
285 IOC_5_HOT_SPARE *spare;
286 CONFIG_PAGE_RAID_VOL_0 *vinfo;
287 RAID_VOL0_PHYS_DISK *disk;
288 CONFIG_PAGE_RAID_VOL_1 *vnames;
289 CONFIG_PAGE_RAID_PHYS_DISK_0 *pinfo;
290 struct mpt_standalone_disk *sdisks;
291 int error, fd, i, j, nsdisks;
294 warnx("show config: extra arguments");
298 fd = mpt_open(mpt_unit);
305 /* Get the config from the controller. */
306 ioc2 = mpt_read_ioc_page(fd, 2, NULL);
307 ioc5 = mpt_read_ioc_page(fd, 5, NULL);
308 if (ioc2 == NULL || ioc5 == NULL) {
310 warn("Failed to get config");
315 if (mpt_fetch_disks(fd, &nsdisks, &sdisks) < 0) {
317 warn("Failed to get standalone drive list");
324 /* Dump out the configuration. */
325 printf("mpt%d Configuration: %d volumes, %d drives\n",
326 mpt_unit, ioc2->NumActiveVolumes, ioc2->NumActivePhysDisks +
328 vol = ioc2->RaidVolume;
329 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
330 printf(" volume %s ", mpt_volume_name(vol->VolumeBus,
332 vinfo = mpt_vol_info(fd, vol->VolumeBus, vol->VolumeID, NULL);
334 printf("%s UNKNOWN", mpt_raid_level(vol->VolumeType));
336 print_vol(vinfo, -1);
337 vnames = mpt_vol_names(fd, vol->VolumeBus, vol->VolumeID, NULL);
338 if (vnames != NULL) {
339 if (vnames->Name[0] != '\0')
340 printf(" <%s>", vnames->Name);
348 disk = vinfo->PhysDisk;
349 for (j = 0; j < vinfo->NumPhysDisks; disk++, j++) {
350 printf(" drive %u ", disk->PhysDiskNum);
351 pinfo = mpt_pd_info(fd, disk->PhysDiskNum, NULL);
353 print_pd(pinfo, -1, 0);
358 if (vinfo->VolumeSettings.HotSparePool != 0) {
359 printf(" spare pools: ");
360 print_spare_pools(vinfo->VolumeSettings.HotSparePool);
366 spare = ioc5->HotSpare;
367 for (i = 0; i < ioc5->NumHotSpares; spare++, i++) {
368 printf(" spare %u ", spare->PhysDiskNum);
369 pinfo = mpt_pd_info(fd, spare->PhysDiskNum, NULL);
371 print_pd(pinfo, -1, 0);
374 printf(" backs pool %d\n", ffs(spare->HotSparePool) - 1);
376 for (i = 0; i < nsdisks; i++) {
377 printf(" drive %s ", sdisks[i].devname);
378 print_standalone(&sdisks[i], -1, 0);
388 MPT_COMMAND(show, config, show_config);
391 show_volumes(int ac, char **av)
393 CONFIG_PAGE_IOC_2 *ioc2;
394 CONFIG_PAGE_IOC_2_RAID_VOL *vol;
395 CONFIG_PAGE_RAID_VOL_0 **volumes;
396 CONFIG_PAGE_RAID_VOL_1 *vnames;
397 int error, fd, i, len, state_len;
400 warnx("show volumes: extra arguments");
404 fd = mpt_open(mpt_unit);
411 /* Get the volume list from the controller. */
412 ioc2 = mpt_read_ioc_page(fd, 2, NULL);
415 warn("Failed to get volume list");
420 * Go ahead and read the info for all the volumes and figure
421 * out the maximum width of the state field.
423 volumes = malloc(sizeof(*volumes) * ioc2->NumActiveVolumes);
424 state_len = strlen("State");
425 vol = ioc2->RaidVolume;
426 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
427 volumes[i] = mpt_vol_info(fd, vol->VolumeBus, vol->VolumeID,
429 if (volumes[i] == NULL)
430 len = strlen("UNKNOWN");
432 len = strlen(mpt_volstate(
433 volumes[i]->VolumeStatus.State));
437 printf("mpt%d Volumes:\n", mpt_unit);
438 printf(" Id Size Level Stripe ");
439 len = state_len - strlen("State");
440 for (i = 0; i < (len + 1) / 2; i++)
443 for (i = 0; i < len / 2; i++)
445 printf(" Write-Cache Name\n");
446 vol = ioc2->RaidVolume;
447 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
448 printf("%6s ", mpt_volume_name(vol->VolumeBus, vol->VolumeID));
449 if (volumes[i] != NULL)
450 print_vol(volumes[i], state_len);
453 mpt_raid_level(vol->VolumeType), state_len,
455 if (volumes[i] != NULL) {
456 if (volumes[i]->VolumeSettings.Settings &
457 MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE)
460 printf(" Disabled ");
464 vnames = mpt_vol_names(fd, vol->VolumeBus, vol->VolumeID, NULL);
465 if (vnames != NULL) {
466 if (vnames->Name[0] != '\0')
467 printf(" <%s>", vnames->Name);
478 MPT_COMMAND(show, volumes, show_volumes);
481 show_drives(int ac, char **av)
483 struct mpt_drive_list *list;
484 struct mpt_standalone_disk *sdisks;
485 int error, fd, i, len, nsdisks, state_len;
488 warnx("show drives: extra arguments");
492 fd = mpt_open(mpt_unit);
499 /* Get the drive list. */
500 list = mpt_pd_list(fd);
504 warn("Failed to get drive list");
508 /* Fetch the list of standalone disks for this controller. */
510 if (mpt_fetch_disks(fd, &nsdisks, &sdisks) != 0) {
515 state_len = strlen(STANDALONE_STATE);
517 /* Walk the drive list to determine width of state column. */
518 for (i = 0; i < list->ndrives; i++) {
519 len = strlen(mpt_pdstate(list->drives[i]));
524 /* List the drives. */
525 printf("mpt%d Physical Drives:\n", mpt_unit);
526 for (i = 0; i < list->ndrives; i++) {
527 printf("%4u ", list->drives[i]->PhysDiskNum);
528 print_pd(list->drives[i], state_len, 1);
531 mpt_free_pd_list(list);
532 for (i = 0; i < nsdisks; i++) {
533 printf("%4s ", sdisks[i].devname);
534 print_standalone(&sdisks[i], state_len, 1);
543 MPT_COMMAND(show, drives, show_drives);
547 show_physdisks(int ac, char **av)
549 CONFIG_PAGE_RAID_PHYS_DISK_0 *pinfo;
554 warnx("show drives: extra arguments");
558 fd = mpt_open(mpt_unit);
565 /* Try to find each possible phys disk page. */
566 for (i = 0; i <= 0xff; i++) {
567 pinfo = mpt_pd_info(fd, i, &IOCStatus);
569 if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
570 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
571 warnx("mpt_pd_info(%d): %s", i,
572 mpt_ioc_status(IOCStatus));
576 print_pd(pinfo, -1, 1);
584 MPT_COMMAND(show, pd, show_physdisks);